10
www.apem.com
Q-SERIES 14mmØ Panel Mounting LED Indicator
Product Specification
Intensity (Typical) at |op Standard Prominent Flush Forward Voltage
(all voltages) (all voltages)
HE Red 80mcd 10mcd 2.0V
Green 40mcd 5mcd 2.2V
Yellow 30mcd 4mcd 2.1V
Blue 280mcd 10mcd 3.2V
White 350mcd 20mcd 3.2V
Bi-colour (Typical) (Red/Green) 80/50mcd 14/10mcd 2.0V/2.2V
Tri-colour (Typical) (Red/Green/Yellow) 80/50/50mcd 14/10/10mcd 2.0V/2.2V/2.1V
Bi-colour - The colour is changed by reversing the polarity of the supply voltage.
Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright Prominent Flush Forward Voltage
(all voltages) (all voltages)
HE Red 7,500mcd 2000mcd 2.2V
Green 4,100mcd 250mcd 3.5V
Yellow 2,500mcd 350mcd 2.3V
Blue 1,300mcd 300mcd 3.7V
White 1,900mcd 200mcd 3.7V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 100° (dependant on model)
Life Expectancy: 100,000 hours
Operating Temperature Range: –40 to +85°C
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
Distinctive Features and Specifications
• 14mmpanelmountingLEDindicator
• 10mmcoloureddiffusedepoxylensor10mmwaterclearsuperbrightLEDs
• Brightchrome,blackchromeorsatingreybezelfinish
• Prominentandflushbezelstyles
• 2VDC–220VAC
• (2.8x0.8)terminals,pinsor(200mmlong)wireterminations
• IP67sealingoption(EN60529)
• Suppliedwithfixingnutandspringwasher
NB: UL Recognised Component
Switch Voltage Operating Voltage Vop Operating Current |op
(Min to Max) (Typical All Types)
2VDC (No Resistor) 1.8 to 2.5VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC 99 to 121VDC 6mA
230VAC 207 to 253VDC 3mA
PANEL CUTOUT
Ø 14,00 ±0,1
TECHNICAL SPECIFICATIONS
11
www.apem.com
Q-SERIES 14mmØ Panel Mounting LED Indicator
Technical Drawings
PROMINENT BEZEL
Note: The company reserves the right to change specifications without notice.
FLUSH BEZEL
CUSTOM ENGRAVING
Custom engraving available on flush bezel versions, contact APEM for further details.
SHORT BODY PINS
SHORT BODY PINS
WIRES
WIRES
PINS
PINS
SOLDER LUG/FASTONS
SOLDER LUG/FASTONS
SHORT BODY WIRES
SHORT BODY WIRES
±10
±10
±10
±10
12
www.apem.com
Q-SERIES 14mmØ Panel Mounting LED Indicator
Order Overview
STANDARD OPTIONS
Q 14 P 1 C XX B 28 E
• GoldFastonterminaldenotesAnode(+),silverterminaldenotesCathode(-)
• Standardwirelengthis200mm,22AWG,redwiredenotesAnode(+),blackwiredenotesCathode(-)
for other wire lengths consult APEM
• ForLEDswithalternatevoltagesconsultAPEM
• BicolourLEDs,byconnectingthegoldFaston(+)onecolourisproduced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
• TakecarewhensolderingtotheFastonterminals
• Shortbodypinsandwiresareonlyavailableupto28VDC
• TheTri-colourLEDhasredandgreenLEDswhenbothareconnectedyellowisproduced
• StandardTri-colourFastonterminalsaretwoAnodes(+)andoneCathode(-)
• Tri-colourwiresareonered(+)andonegreen(+)Anodeandoneblack(-)Cathode
• Tri-colourpinsarecentre(–)cathode,shortest(+)anodepingreen,longest(+)anodepinred
• Maximumpanelthickness11mm
• ForbehindpanelepoxysealedoptionspleaseconsultApem
• WerecommendusingSuperbrightLEDsforuseat220VAC
Q
Example Q14P1CXXB28E
Ø14mm, prominent bezel, solder lug terminals,
bright chrome finish, fixed light, blue,
28volt DC LED, IP67 Panel Seal
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
SERIES MOUNTING
HOLE
14 = Ø14mm P = Prominent
F = Flush
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOUR VOLTAGE SEALING
The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.