ECP5TM and ECP5-5GTM Family Data Sheet FPGA-DS-02012 Version 1.8 November 2017 ECP5TM and ECP5-5GTM Family Data Sheet Copyright Notice Copyright (c) 2014-2017 Lattice Semiconductor Corporation. All rights reserved. The contents of these materials contain proprietary and confidential information (including trade secrets, copyright, and other Intellectual Property interests) of Lattice Semiconductor Corporation and/or its affiliates. All rights are reserved. You are permitted to use this document and any information contained therein expressly and only for bona fide non-commercial evaluation of products and/or services from Lattice Semiconductor Corporation or its affiliates; and only in connection with your bona fide consideration of purchase or license of products or services from Lattice Semiconductor Corporation or its affiliates, and only in accordance with the terms and conditions stipulated. Contents, (in whole or in part) may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior written permission of Lattice Semiconductor Corporation and/or its affiliates. Copyright infringement is a violation of federal law subject to criminal and civil penalties. You have no right to copy, modify, create derivative works of, transfer, sublicense, publicly display, distribute or otherwise make these materials available, in whole or in part, to any third party. You are not permitted to reverse engineer, disassemble, or decompile any device or object code provided herewith. Lattice Semiconductor Corporation reserves the right to revoke these permissions and require the destruction or return of any and all Lattice Semiconductor Corporation proprietary materials and/or data. Patents The subject matter described herein may contain one or more inventions claimed in patents or patents pending owned by Lattice Semiconductor Corporation and/or its affiliates. Trademark Acknowledgment Lattice Semiconductor Corporation(R), the Lattice Semiconductor logo, Silicon Image(R), the Silicon Image logo, Instaport(R), the Instaport logo, InstaPrevue(R), Simplay(R), Simplay HD(R), the Simplay HD logo, Simplay LabsTM, the Simplay Labs logo, the SiBEAM SnapTM, the SiBEAM Snap logo, UltraGigTM, the UltraGig logo are trademarks or registered trademarks of Lattice Semiconductor Corporation in the United States and/or other countries. HDMI(R) and the HDMI logo with High-Definition Multimedia Interface are trademarks or registered trademarks of, and are used under license from, HDMI Licensing, LLC. in the United States or other countries. MHL(R) and the MHL logo with Mobile High-Definition Link are trademarks or registered trademarks of, and are used under license from, MHL, LLC. in the United States and/or other countries. WirelessHD(R), the WirelessHD logo, WiHD(R) and the WiHD logo are trademarks, registered trademarks or service marks of SiBeam, Inc. in the United States or other countries. HDMI Licensing, LLC; MHL, LLC; Simplay Labs, LLC; and SiBeam, Inc. are wholly owned subsidiaries of Lattice Semiconductor Corporation. All other trademarks and registered trademarks are the property of their respective owners in the United States or other countries. The absence of a trademark symbol does not constitute a waiver of Lattice Semiconductor's trademarks or other intellectual property rights with regard to a product name, logo or slogan. Export Controlled Document This document contains materials that are subject to the U.S. Export Administration Regulations and may also be subject to additional export control laws and regulations (collectively "Export Laws") and may be used only in compliance with such Export Laws. Unless otherwise authorized by an officer of Lattice Semiconductor Corporation in writing, this document and the information contained herein (a) may not be used in relation to nuclear, biological or chemical weapons, or missiles capable of delivering these weapons, and (b) may not be re-exported or otherwise transferred to a third party who is known or suspected to be involved in relation to nuclear, biological or chemical weapons, or missiles capable of delivering these weapons, or to any sanctioned persons or entities. Further Information To request other materials, documentation, and information, contact your local Lattice Semiconductor sales office or visit the Lattice Semiconductor web site at www.latticesemi.com. Disclaimers These materials are provided on an "AS IS" basis. Lattice Semiconductor Corporation and its affiliates disclaim all representations and warranties (express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes. Lattice Semiconductor Corporation and its affiliates assume no liability or responsibility for any errors or omissions in these materials, makes no commitment or warranty to correct any such errors or omissions or update or keep current the information contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or interpretation of, or actions taken or not taken based on the content of these materials. Lattice Semiconductor Corporation and its affiliates reserve the right, without notice, to periodically modify the information in these materials, and to add to, delete, and/or change any of this information. Products and Services The products and services described in these materials, and any other information, services, designs, know-how and/or products provided by Lattice Semiconductor Corporation and/or its affiliates are provided on "AS IS" basis, except to the extent that Lattice Semiconductor Corporation and/or its affiliates provides an applicable written limited warranty in its standard form license agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in which case such limited warranty shall apply and shall govern in lieu of all other warranties (express, statutory, or implied). EXCEPT FOR SUCH LIMITED WARRANTY, LATTICE SEMICONDUCTOR CORPORATION AND ITS AFFILIATES DISCLAIM ALL REPRESENTATIONS AND WARRANTIES (EXPRESS, IMPLIED, STATUTORY OR OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS PROVIDED BY LATTICE SEMICONDUCTOR CORPORATION AND/OR ITS AFFILIATES, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED, TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE, MALFUNCTION, OR ANY INACCURACY OF THESE ITEMS CARRIES A RISK OF DEATH OR SERIOUS BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION, EMERGENCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR DEGREE OF POTENTIAL HAZARD. NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOW-HOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 2 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Contents Acronyms in This Document ................................................................................................................................................. 9 1. General Description .................................................................................................................................................... 10 1.1 Features ............................................................................................................................................................ 10 2. Architecture ................................................................................................................................................................ 12 2.1. Overview ........................................................................................................................................................... 12 2.2 PFU Blocks ......................................................................................................................................................... 13 2.2.1 Slice ............................................................................................................................................................... 14 2.2.2. Modes of Operation...................................................................................................................................... 17 2.3. Routing .............................................................................................................................................................. 18 2.4. Clocking Structure ............................................................................................................................................. 18 2.4.1. sysCLOCK PLL ................................................................................................................................................ 18 2.5. Clock Distribution Network ............................................................................................................................... 19 2.5.1. Primary Clocks .............................................................................................................................................. 20 2.5.2. Edge Clock ..................................................................................................................................................... 21 2.6. Clock Dividers .................................................................................................................................................... 22 2.7. DDRDLL .............................................................................................................................................................. 23 2.8. sysMEM Memory .............................................................................................................................................. 24 2.8.1. sysMEM Memory Block ................................................................................................................................ 24 2.8.2. Bus Size Matching ......................................................................................................................................... 25 2.8.3. RAM Initialization and ROM Operation ........................................................................................................ 25 2.8.4. Memory Cascading ....................................................................................................................................... 25 2.8.5. Single, Dual and Pseudo-Dual Port Modes ................................................................................................... 25 2.8.6. Memory Core Reset ...................................................................................................................................... 26 2.9. sysDSPTM Slice .................................................................................................................................................... 26 2.9.1. sysDSP Slice Approach Compared to General DSP ....................................................................................... 26 2.9.2. sysDSP Slice Architecture Features ............................................................................................................... 27 2.10. Programmable I/O Cells .................................................................................................................................... 30 2.11. PIO ..................................................................................................................................................................... 32 2.11.1. Input Register Block .................................................................................................................................. 32 2.11.2. Output Register Block ............................................................................................................................... 33 2.12. Tristate Register Block ....................................................................................................................................... 34 2.13. DDR Memory Support ....................................................................................................................................... 35 2.13.1. DQS Grouping for DDR Memory ............................................................................................................... 35 2.13.2. DLL Calibrated DQS Delay and Control Block (DQSBUF)........................................................................... 36 2.14. sysI/O Buffer ..................................................................................................................................................... 38 2.14.1. sysI/O Buffer Banks .................................................................................................................................. 38 2.14.2. Typical sysI/O I/O Behavior during Power-up .......................................................................................... 39 2.14.3. Supported sysI/O Standards ..................................................................................................................... 39 2.14.4. On-Chip Programmable Termination ....................................................................................................... 40 2.14.5. Hot Socketing ........................................................................................................................................... 40 2.15. SERDES and Physical Coding Sublayer ............................................................................................................... 41 2.15.1. SERDES Block ............................................................................................................................................ 43 2.15.2. PCS ............................................................................................................................................................ 43 2.15.3. SERDES Client Interface Bus ..................................................................................................................... 44 2.16. Flexible Dual SERDES Architecture .................................................................................................................... 44 2.17. IEEE 1149.1-Compliant Boundary Scan Testability ........................................................................................... 44 2.18. Device Configuration ......................................................................................................................................... 45 2.18.1. Enhanced Configuration Options ............................................................................................................. 45 2.18.2. Single Event Upset (SEU) Support ............................................................................................................ 45 2.18.3. On-Chip Oscillator .................................................................................................................................... 46 2.19. Density Shifting ................................................................................................................................................. 46 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 3 ECP5TM and ECP5-5GTM Family Data Sheet 3. DC and Switching Characteristics................................................................................................................................47 3.1. Absolute Maximum Ratings ..............................................................................................................................47 3.2. Recommended Operating Conditions ...............................................................................................................47 3.3. Power Supply Ramp Rates .................................................................................................................................48 3.4. Power-On-Reset Voltage Levels ........................................................................................................................48 3.5. Power up Sequence ...........................................................................................................................................48 3.6. Hot Socketing Specifications .............................................................................................................................48 3.7. Hot Socketing Requirements .............................................................................................................................49 3.8. ESD Performance ...............................................................................................................................................49 3.9. DC Electrical Characteristics ..............................................................................................................................49 3.10. Supply Current (Standby) ..................................................................................................................................50 3.11. SERDES Power Supply Requirements1,2,3 ...........................................................................................................51 3.12. sysI/O Recommended Operating Conditions ....................................................................................................53 3.13. sysI/O Single-Ended DC Electrical Characteristics .............................................................................................54 3.14. sysI/O Differential Electrical Characteristics .....................................................................................................55 3.14.1. LVDS ..........................................................................................................................................................55 3.14.2. SSTLD ........................................................................................................................................................55 3.14.3. LVCMOS33D..............................................................................................................................................55 3.14.4. LVDS25E ....................................................................................................................................................56 3.14.5. BLVDS25....................................................................................................................................................57 3.14.6. LVPECL33 ..................................................................................................................................................58 3.14.7. MLVDS25 ..................................................................................................................................................59 3.14.8. SLVS ..........................................................................................................................................................60 3.15. Typical Building Block Function Performance ...................................................................................................61 3.16. Derating Timing Tables ......................................................................................................................................62 3.17. Maximum I/O Buffer Speed ..............................................................................................................................63 3.18. External Switching Characteristics ....................................................................................................................64 3.19. sysCLOCK PLL Timing .........................................................................................................................................71 3.20. SERDES High-Speed Data Transmitter ...............................................................................................................72 3.21. SERDES/PCS Block Latency ................................................................................................................................73 3.22. SERDES High-Speed Data Receiver ....................................................................................................................74 3.23. Input Data Jitter Tolerance ................................................................................................................................74 3.24. SERDES External Reference Clock......................................................................................................................75 3.25. PCI Express Electrical and Timing Characteristics..............................................................................................76 3.25.1. PCIe (2.5 Gb/s) AC and DC Characteristics ................................................................................................76 3.25.2. PCIe (5 Gb/s) - Preliminary AC and DC Characteristics ............................................................................77 3.26. CPRI LV2 E.48 Electrical and Timing Characteristics - Preliminary....................................................................79 3.27. XAUI/CPRI LV E.30 Electrical and Timing Characteristics ..................................................................................80 3.27.1. AC and DC Characteristics ........................................................................................................................80 3.28. CPRI LV E.24 Electrical and Timing Characteristics ............................................................................................80 3.28.1. AC and DC Characteristics ........................................................................................................................80 3.29. Gigabit Ethernet/SGMII/CPRI LV E.12 Electrical and Timing Characteristics ....................................................81 3.29.1. AC and DC Characteristics ........................................................................................................................81 3.30. SMPTE SD/HD-SDI/3G-SDI (Serial Digital Interface) Electrical and Timing Characteristics ...............................82 3.30.1. AC and DC Characteristics ........................................................................................................................82 3.31. sysCONFIG Port Timing Specifications ..............................................................................................................83 3.32. JTAG Port Timing Specifications ........................................................................................................................88 3.33. Switching Test Conditions .................................................................................................................................89 4. Pinout Information .....................................................................................................................................................91 4.1. Signal Descriptions ............................................................................................................................................91 4.2. PICs and DDR Data (DQ) Pins Associated with the DDR Strobe (DQS) Pin ........................................................94 4.3. Pin Information Summary .................................................................................................................................95 4.3.1. LFE5UM/LFE5UM5G .....................................................................................................................................95 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 4 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 4.3.2. LFE5U ............................................................................................................................................................ 96 Ordering Information ................................................................................................................................................. 98 5.1. ECP5/ECP5-5G Part Number Description .......................................................................................................... 98 5.2. Ordering Part Numbers ................................................................................................................................... 100 5.2.1. Commercial ................................................................................................................................................. 100 5.2.2. Industrial ..................................................................................................................................................... 101 Supplemental Information ............................................................................................................................................... 104 For Further Information................................................................................................................................................ 104 Revision History ................................................................................................................................................................ 105 5. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 5 ECP5TM and ECP5-5GTM Family Data Sheet Figures Figure 2.1. Simplified Block Diagram, LFE5UM/LFE5UM5G-85 Device (Top Level) ............................................................13 Figure 2.2. PFU Diagram .....................................................................................................................................................14 Figure 2.3. Slice Diagram ....................................................................................................................................................15 Figure 2.4. Connectivity Supporting LUT5, LUT6, LUT7, and LUT8 .....................................................................................16 Figure 2.5. General Purpose PLL Diagram ...........................................................................................................................18 Figure 2.6. LFE5UM/LFE5UM5G-85 Clocking ......................................................................................................................20 Figure 2.7. DCS Waveforms ................................................................................................................................................21 Figure 2.8. Edge Clock Sources per Bank ............................................................................................................................22 Figure 2.9. ECP5/ECP5-5G Clock Divider Sources ...............................................................................................................22 Figure 2.10. DDRDLL Functional Diagram ...........................................................................................................................23 Figure 2.11. ECP5/ECP5-5G DLL Top Level View (For LFE-45 and LFE-85) ..........................................................................24 Figure 2.12. Memory Core Reset ........................................................................................................................................26 Figure 2.13. Comparison of General DSP and ECP5/ECP5-5G Approaches ........................................................................27 Figure 2.14. Simplified sysDSP Slice Block Diagram ............................................................................................................28 Figure 2.15. Detailed sysDSP Slice Diagram ........................................................................................................................29 Figure 2.16. Group of Four Programmable I/O Cells on Left/Right Sides ...........................................................................31 Figure 2.17. Input Register Block for PIO on Top Side of the Device ..................................................................................32 Figure 2.18. Input Register Block for PIO on Left and Right Side of the Device ..................................................................32 Figure 2.19. Output Register Block on Top Side .................................................................................................................33 Figure 2.20. Output Register Block on Left and Right Sides ...............................................................................................34 Figure 2.21. Tristate Register Block on Top Side.................................................................................................................34 Figure 2.22. Tristate Register Block on Left and Right Sides ...............................................................................................35 Figure 2.23. DQS Grouping on the Left and Right Edges ....................................................................................................36 Figure 2.24. DQS Control and Delay Block (DQSBUF) .........................................................................................................37 Figure 2.25. ECP5/ECP5-5G Device Family Banks ...............................................................................................................38 Figure 2.26. On-Chip Termination ......................................................................................................................................40 Figure 2.27. SERDES/PCS Duals (LFE5UM/LFE5UM5G-85) .................................................................................................42 Figure 2.28. Simplified Channel Block Diagram for SERDES/PCS Block ..............................................................................43 Figure 3.1. LVDS25E Output Termination Example ............................................................................................................56 Figure 3.2. BLVDS25 Multi-point Output Example..............................................................................................................57 Figure 3.3. Differential LVPECL33 .......................................................................................................................................58 Figure 3.4. MLVDS25 (Multipoint Low Voltage Differential Signaling) ...............................................................................59 Figure 3.5. SLVS Interface ...................................................................................................................................................60 Figure 3.6. Receiver RX.CLK.Centered Waveforms .............................................................................................................68 Figure 3.7. Receiver RX.CLK.Aligned and DDR Memory Input Waveforms .........................................................................68 Figure 3.8. Transmit TX.CLK.Centered and DDR Memory Output Waveforms ...................................................................68 Figure 3.9. Transmit TX.CLK.Aligned Waveforms ................................................................................................................69 Figure 3.10. DDRX71 Video Timing Waveforms ..................................................................................................................69 Figure 3.11. Receiver DDRX71_RX Waveforms ...................................................................................................................70 Figure 3.12. Transmitter DDRX71_TX Waveforms ..............................................................................................................70 Figure 3.13. Transmitter and Receiver Latency Block Diagram ..........................................................................................73 Figure 3.14. SERDES External Reference Clock Waveforms ................................................................................................75 Figure 3.15. sysCONFIG Parallel Port Read Cycle ................................................................................................................84 Figure 3.16. sysCONFIG Parallel Port Write Cycle ...............................................................................................................85 Figure 3.17. sysCONFIG Slave Serial Port Timing ................................................................................................................85 Figure 3.18. Power-On-Reset (POR) Timing ........................................................................................................................86 Figure 3.19. sysCONFIG Port Timing ...................................................................................................................................86 Figure 3.20. Configuration from PROGRAMN Timing .........................................................................................................87 Figure 3.21. Wake-Up Timing .............................................................................................................................................87 Figure 3.22. Master SPI Configuration Waveforms ............................................................................................................88 Figure 3.23. JTAG Port Timing Waveforms .........................................................................................................................89 Figure 3.24. Output Test Load, LVTTL and LVCMOS Standards ..........................................................................................89 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 6 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Tables Table 1.1. ECP5 and ECP5-5G Family Selection Guide ........................................................................................................ 11 Table 2.1. Resources and Modes Available per Slice .......................................................................................................... 14 Table 2.2. Slice Signal Descriptions ..................................................................................................................................... 16 Table 2.3. Number of Slices Required to Implement Distributed RAM .............................................................................. 17 Table 2.4. PLL Blocks Signal Descriptions............................................................................................................................ 19 Table 2.5. DDRDLL Ports List ............................................................................................................................................... 23 Table 2.6. sysMEM Block Configurations ............................................................................................................................ 25 Table 2.7. Maximum Number of Elements in a Slice .......................................................................................................... 30 Table 2.8. Input Block Port Description .............................................................................................................................. 33 Table 2.9. Output Block Port Description ........................................................................................................................... 34 Table 2.10. Tristate Block Port Description ........................................................................................................................ 35 Table 2.11. DQSBUF Port List Description .......................................................................................................................... 37 Table 2.12. On-Chip Termination Options for Input Modes ............................................................................................... 40 Table 2.13. LFE5UM/LFE5UM5G SERDES Standard Support .............................................................................................. 42 Table 2.14. Available SERDES Duals per LFE5UM/LFE5UM5G Devices ............................................................................... 43 Table 2.15. LFE5UM/LFE5UM5G Mixed Protocol Support ................................................................................................. 44 Table 2.16. Selectable Master Clock (MCLK) Frequencies during Configuration (Nominal) ............................................... 46 Table 3.1. Absolute Maximum Ratings ............................................................................................................................... 47 Table 3.2. Recommended Operating Conditions ................................................................................................................ 47 Table 3.3. Power Supply Ramp Rates ................................................................................................................................. 48 Table 3.4. Power-On-Reset Voltage Levels ......................................................................................................................... 48 Table 3.5. Hot Socketing Specifications .............................................................................................................................. 48 Table 3.6. Hot Socketing Requirements ............................................................................................................................. 49 Table 3.7. DC Electrical Characteristics ............................................................................................................................... 49 Table 3.8. ECP5/ECP5-5G Supply Current (Standby) .......................................................................................................... 50 Table 3.9. ECP5UM ............................................................................................................................................................. 51 Table 3.10. ECP5-5G ........................................................................................................................................................... 52 Table 3.11. sysI/O Recommended Operating Conditions ................................................................................................... 53 Table 3.12. LVDS ................................................................................................................................................................. 55 Table 3.13. LVDS25E DC Conditions.................................................................................................................................... 56 Table 3.14. BLVDS25 DC Conditions ................................................................................................................................... 57 Table 3.15. LVPECL33 DC Conditions .................................................................................................................................. 58 Table 3.16. MLVDS25 DC Conditions .................................................................................................................................. 59 Table 3.17. Input to SLVS .................................................................................................................................................... 60 Table 3.18. Pin-to-Pin Performance.................................................................................................................................... 61 Table 3.19. Register-to-Register Performance ................................................................................................................... 62 Table 3.20. ECP5/ECP5-5G Maximum I/O Buffer Speed ..................................................................................................... 63 Table 3.21. ECP5/ECP5-5G External Switching Characteristics ........................................................................................... 64 Table 3.22. sysCLOCK PLL Timing ........................................................................................................................................ 71 Table 3.23. Serial Output Timing and Levels ...................................................................................................................... 72 Table 3.24. Channel Output Jitter ....................................................................................................................................... 72 Table 3.25. SERDES/PCS Latency Breakdown ..................................................................................................................... 73 Table 3.26. Serial Input Data Specifications ....................................................................................................................... 74 Table 3.27. Receiver Total Jitter Tolerance Specification ................................................................................................... 74 Table 3.28. External Reference Clock Specification (refclkp/refclkn) ................................................................................. 75 Table 3.29. PCIe (2.5 Gb/s) ................................................................................................................................................. 76 Table 3.30. PCIe (5 Gb/s) .................................................................................................................................................... 77 Table 3.31. CPRI LV2 E.48 Electrical and Timing Characteristics ........................................................................................ 79 Table 3.32. Transmit ........................................................................................................................................................... 80 Table 3.33. Receive and Jitter Tolerance ............................................................................................................................ 80 Table 3.34. Transmit ........................................................................................................................................................... 80 Table 3.35. Receive and Jitter Tolerance ............................................................................................................................ 81 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 7 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.36. Transmit ...........................................................................................................................................................81 Table 3.37. Receive and Jitter Tolerance ............................................................................................................................81 Table 3.38. Transmit ...........................................................................................................................................................82 Table 3.39. Receive .............................................................................................................................................................82 Table 3.40. Reference Clock ...............................................................................................................................................82 Table 3.41. ECP5/ECP5-5G sysCONFIG Port Timing Specifications .....................................................................................83 Table 3.42. JTAG Port Timing Specifications .......................................................................................................................88 Table 3.43. Test Fixture Required Components, Non-Terminated Interfaces ....................................................................90 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 8 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Acronyms in This Document A list of acronyms used in this document. Acronym Definition ALU Arithmetic Logic Unit BGA Ball Grid Array CDR Clock and Data Recovery CRC Cycle Redundancy Code DCC Dynamic Clock Control DCS Dynamic Clock Select DDR Double Data Rate DLL Delay-Locked Loops DSP Digital Signal Processing EBR Embedded Block RAM ECLK Edge Clock FFT Fast Fourier Transforms FIFO First In First Out FIR Finite Impulse Response LVCMOS Low-Voltage Complementary Metal Oxide Semiconductor LVDS Low-Voltage Differential Signaling LVPECL Low Voltage Positive Emitter Coupled Logic LVTTL Low Voltage Transistor-Transistor Logic LUT Look Up Table MLVDS Multipoint Low-Voltage Differential Signaling PCI Peripheral Component Interconnect PCS Physical Coding Sublayer PCLK Primary Clock PDPR Pseudo Dual Port RAM PFU Programmable Functional Unit PIC Programmable I/O Cells PLL Phase-Locked Loops POR Power On Reset SCI SERDES Client Interface SERDES Serializer/Deserializer SEU Single Event Upset SLVS Scalable Low-Voltage Signaling SPI Serial Peripheral Interface SPR Single Port RAM SRAM Static Random-Access Memory TAP Test Access Port TDM Time Division Multiplexing (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 9 ECP5TM and ECP5-5GTM Family Data Sheet 1. General Description The ECP5/ECP5-5G family of FPGA devices is optimized to deliver high performance features such as an enhanced DSP architecture, high speed SERDES (Serializer/Deserializer), and high speed source synchronous interfaces, in an economical FPGA fabric. This combination is achieved through advances in device architecture and the use of 40 nm technology making the devices suitable for high-volume, highspeed, and low-cost applications. The ECP5/ECP5-5G device family covers look-up-table (LUT) capacity to 84K logic elements and supports up to 365 user I/Os. The ECP5/ECP5-5G device family also offers up to 156 18 x 18 multipliers and a wide range of parallel I/O standards. The ECP5/ECP5-5G FPGA fabric is optimized high performance with low power and low cost in mind. The ECP5/ ECP5-5G devices utilize reconfigurable SRAM logic technology and provide popular building blocks such as LUT-based logic, distributed and embedded memory, Phase-Locked Loops (PLLs), Delay-Locked Loops (DLLs), pre-engineered source synchronous I/O support, enhanced sysDSP slices and advanced configuration support, including encryption and dual-boot capabilities. The Lattice DiamondTM design software allows large complex designs to be efficiently implemented using the ECP5/ECP5-5G FPGA family. Synthesis library support for ECP5/ECP5-5G devices is available for popular logic synthesis tools. The Diamond tools use the synthesis tool output along with the constraints from its floor planning tools to place and route the design in the ECP5/ECP5-5G device. The tools extract the timing from the routing and back-annotate it into the design for timing verification. Lattice provides many pre-engineered IP (Intellectual Property) modules for the ECP5/ECP5-5G family. By using these configurable soft core IPs as standardized blocks, designers are free to concentrate on the unique aspects of their design, increasing their productivity. 1.1. The pre-engineered source synchronous logic implemented in the ECP5/ECP5-5G device family supports a broad range of interface standards including DDR2/3, LPDDR2/3, XGMII, and 7:1 LVDS. The ECP5/ECP5-5G device family also features high speed SERDES with dedicated Physical Coding Sublayer (PCS) functions. High jitter tolerance and low transmit jitter allow the SERDES plus PCS blocks to be configured to support an array of popular data protocols including PCI Express, Ethernet (XAUI, GbE, and SGMII) and CPRI. Transmit De-emphasis with pre- and post-cursors, and Receive Equalization settings make the SERDES suitable for transmission and reception over various forms of media. The ECP5/ECP5-5G devices also provide flexible, reliable and secure configuration options, such as dual-boot capability, bit-stream encryption, and TransFR field upgrade features. ECP5-5G family devices have made some enhancement in the SERDES compared to ECP5UM devices. These enhancements increase the performance of the SERDES to up to 5 Gb/s data rate. The ECP5-5G family devices are pin-to-pin compatible with the ECP5UM devices. These allows a migration path for users to port designs from ECP5UM to ECP5-5G devices to get higher performance. Features Higher Logic Density for Increased System Integration 12K to 84K LUTs 197 to 365 user programmable I/Os Embedded SERDES 270 Mb/s, up to 3.2 Gb/s, SERDES interface (ECP5) 270 Mb/s, up to 5.0 Gb/s, SERDES interface (ECP5-5G) Supports eDP in RDR (1.62 Gb/s) and HDR (2.7 Gb/s) Up to four channels per device: PCI Express, Ethernet (1GbE, SGMII, XAUI), and CPRI sysDSPTM Fully cascadable slice architecture 12 to 160 slices for high performance multiply and accumulate Powerful 54-bit ALU operations Time Division Multiplexing MAC Sharing Rounding and truncation Each slice supports Half 36 x 36, two 18 x 18 or four 9 x 9 multipliers Advanced 18 x 36 MAC and 18 x 18 Multiply-Multiply-Accumulate (MMAC) operations Flexible Memory Resources Up to 3.744 Mb sysMEMTM Embedded Block RAM (EBR) 194K to 669K bits distributed RAM sysCLOCK Analog PLLs and DLLs (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 10 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Four DLLs and four PLLs in LFE5-45 and LFE5-85; two DLLs and two PLLs in LFE5-25 and LFE5-12 Pre-Engineered Source Synchronous I/O DDR registers in I/O cells Dedicated read/write levelling functionality Dedicated gearing logic Source synchronous standards support ADC/DAC, 7:1 LVDS, XGMII High Speed ADC/DAC devices Dedicated DDR2/DDR3 and LPDDR2/LPDDR3 memory support with DQS logic, up to 800 Mb/s data-rate Programmable sysI/OTM Buffer Supports Wide Range of Interfaces On-chip termination LVTTL and LVCMOS 33/25/18/15/12 SSTL 18/15 I, II HSUL12 LVDS, Bus-LVDS, LVPECL, RSDS, MLVDS subLVDS and SLVS, MIPI D-PHY input interfaces Flexible Device Configuration Shared bank for configuration I/Os SPI boot flash interface Dual-boot images supported Slave SPI TransFRTM I/O for simple field updates Single Event Upset (SEU) Mitigation Support Soft Error Detect - Embedded hard macro Soft Error Correction - Without stopping user operation Soft Error Injection - Emulate SEU event to debug system error handling System Level Support IEEE 1149.1 and IEEE 1532 compliant Reveal Logic Analyzer On-chip oscillator for initialization and general use 1.1 V core power supply for ECP5, 1.2 V core power supply for ECP5UM5G Table 1.1. ECP5 and ECP5-5G Family Selection Guide Device LFE5UM-25 LFE5UM5G-25 LUTs (K) 24 sysMEM Blocks (18 Kb) 56 Embedded Memory (Kb) 1,008 Distributed RAM Bits (Kb) 194 18 X 18 Multipliers 28 SERDES (Dual/Channels) 1/2 PLLs/DLLs 2/2 Packages (SERDES Channels / IO Count) 256 caBGA -- (14 x 14 mm2, 0.8 mm) LFE5UM-45 LFE5UM5G-45 LFE5UM-85 LFE5UM5G-85 LFE5U12 LFE5U25 LFE5U45 LFE5U85 44 108 1944 351 72 2/4 4/4 84 208 3744 669 156 2/4 4/4 12 32 576 97 28 0 2/2 24 56 1,008 194 28 0 2/2 44 108 1944 351 72 0 4/4 84 208 3744 669 156 0 4/4 -- -- 0/197 0/197 -- -- 285 csfBGA (10 x 10 mm2, 0.5 mm) 2/118 2/118 2/118 0/118 0/118 0/118 0/118 381 caBGA (17 x 17 mm2, 0.8 mm) 2/197 4/203 4/205 0/197 0/197 0/203 0/205 554 caBGA (23 x 23 mm2, 0.8 mm) -- 4/245 4/259 -- -- 0/245 0/259 756 caBGA (27 x 27 mm2, 0.8 mm) -- -- 4/365 -- -- -- 0/365 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 11 ECP5TM and ECP5-5GTM Family Data Sheet 2. Architecture 2.1. Overview Each ECP5/ECP5-5G device contains an array of logic blocks surrounded by Programmable I/O Cells (PIC). Interspersed between the rows of logic blocks are rows of sysMEMTM Embedded Block RAM (EBR) and rows of sysDSPTM Digital Signal Processing slices, as shown in Figure 2.1 on page 13. The LFE5-85 devices have three rows of DSP slices, the LFE5-45 devices have two rows, and both LFE5-25 and LFE5-12 devices have one. In addition, the LFE5UM/LFE5UM5G devices contain SERDES Duals on the bottom of the device. The Programmable Functional Unit (PFU) contains the building blocks for logic, arithmetic, RAM and ROM functions. The PFU block is optimized for flexibility, allowing complex designs to be implemented quickly and efficiently. Logic Blocks are arranged in a two-dimensional array. The ECP5/ECP5-5G devices contain one or more rows of sysMEM EBR blocks. sysMEM EBRs are large, dedicated 18 Kb fast memory blocks. Each sysMEM block can be configured in a variety of depths and widths as RAM or ROM. In addition, ECP5/ECP5-5G devices contain up to three rows of DSP slices. Each DSP slice has multipliers and adder/accumulators, which are the building blocks for complex signal processing capabilities. The ECP5 devices feature up to four embedded 3.2 Gb/s SERDES channels, and the ECP5-5G devices feature up to four embedded 5 Gb/s SERDES channels. Each SERDES channel contains independent 8b/10b encoding / decoding, polarity adjust and elastic buffer logic. Each group of two SERDES channels, along with its Physical Coding Sublayer (PCS) block, creates a dual DCU (Dual Channel Unit). The functionality of the SERDES/PCS duals can be controlled by SRAM cell settings during device configuration or by registers that are addressable during device operation. The registers in every dual can be programmed via the SERDES Client Interface (SCI). These DCUs (up to two) are located at the bottom of the devices. Each PIC block encompasses two PIOs (PIO pairs) with their respective sysI/O buffers. The sysI/O buffers of the ECP5/ECP5-5G devices are arranged in seven banks (eight banks for LFE5-85 devices in caBGA756 and caBGA554 packages), allowing the implementation of a wide variety of I/O standards. One of these banks (Bank 8) is shared with the programming interfaces. Half of the PIO pairs on the left and right edges of the device can be configured as LVDS transmit pairs, and all pairs on left and right can be configured as LVDS receive pairs. The PIC logic in the left and right banks also includes pre-engineered support to aid in the implementation of high speed source synchronous standards such as XGMII, 7:1 LVDS, along with memory interfaces including DDR3 and LPDDR3. The ECP5/ECP5-5G registers in PFU and sysI/O can be configured to be SET or RESET. After power up and the device is configured, it enters into user mode with these registers SET/RESET according to the configuration setting, allowing the device entering to a known state for predictable system function. Other blocks provided include PLLs, DLLs and configuration functions. The ECP5/ECP5-5G architecture provides up to four Delay-Locked Loops (DLLs) and up to four Phase-Locked Loops (PLLs). The PLL and DLL blocks are located at the corners of each device. The configuration block that supports features such as configuration bit-stream decryption, transparent updates and dual-boot support is located at the bottom of each device, to the left of the SERDES blocks. Every device in the ECP5/ECP5-5G family supports a sysCONFIGTM ports located in that same corner, powered by Vccio8, allowing for serial or parallel device configuration. In addition, every device in the family has a JTAG port. This family also provides an on-chip oscillator and soft error detect capability. The ECP5 devices use 1.1 V and ECP5UM5G devices use 1.2 V as their core voltage. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 12 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Figure 2.1. Simplified Block Diagram, LFE5UM/LFE5UM5G-85 Device (Top Level) 2.2. PFU Blocks The core of the ECP5/ECP5-5G device consists of PFU blocks. Each PFU block consists of four interconnected slices numbered 0-3, as shown in Figure 2.2. Each slice contains two LUTs. All the interconnections to and from PFU blocks are from routing. There are 50 inputs and 23 outputs associated with each PFU block. The PFU block can be used in Distributed RAM or ROM function, or used to perform Logic, Arithmetic, or ROM functions. Table 2.1 shows the functions each slice can perform in either mode. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 13 ECP5TM and ECP5-5GTM Family Data Sheet From Routing LUT4 & CARRY LUT4 & CARRY LUT4 & CARRY Slice 0 LUT4 & CARRY Slice 1 D FF LUT4 & CARRY D FF LUT4 & CARRY D D FF D D FF LUT4 & CARRY Slice 3 Slice 2 D FF LUT4 & CARRY FF FF D FF To Routing Figure 2.2. PFU Diagram 2.2.1. Slice Each slice contains two LUT4s feeding two registers. In Distributed SRAM mode, Slice 0 through Slice 2 are configured as distributed memory, and Slice 3 is used as Logic or ROM. Table 2.1 shows the capability of the slices along with the operation modes they enable. In addition, each PFU contains logic that allows the LUTs to be combined to perform functions such as LUT5, LUT6, LUT7 and LUT8. There is control logic to perform set/reset functions (programmable as synchronous/ asynchronous), clock select, chip-select and wider RAM/ROM functions. Table 2.1. Resources and Modes Available per Slice Slice PFU (Used in Distributed SRAM) PFU (Not used as Distributed SRAM) Resources Modes Resources Modes Slice 0 2 LUT4s and 2 Registers RAM 2 LUT4s and 2 Registers Logic, Ripple, ROM Slice 1 2 LUT4s and 2 Registers RAM 2 LUT4s and 2 Registers Logic, Ripple, ROM Slice 2 2 LUT4s and 2 Registers RAM 2 LUT4s and 2 Registers Logic, Ripple, ROM Slice 3 2 LUT4s and 2 Registers Logic, Ripple, ROM 2 LUT4s and 2 Registers Logic, Ripple, ROM Figure 2.3 shows an overview of the internal logic of the slice. The registers in the slice can be configured for positive/negative and edge triggered or level sensitive clocks. Each slice has 14 input signals, 13 signals from routing and one from the carry-chain (from the adjacent slice or PFU). There are five outputs, four to routing and one to carry-chain (to the adjacent PFU). There are two inter slice/ PFU output signals that are used to support wider LUT functions, such as LUT6, LUT7 and LUT8. Table 2.2 and Figure 2.3 list the signals associated with all the slices. Figure 2.4 on page 16 shows the connectivity of the inter-slice/PFU signals that support LUT5, LUT6, LUT7 and LUT8. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 14 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet FCO FXA FXB M1 M0 A1 B1 C1 D1 LUT4 & CARRY* F1 F1 FF Q1 A0 B0 C0 D0 LUT4 & CARRY* F0 F0 FF Q0 CE CLK LSR FCI From Different Slice/PFU Notes: For Slices 0 and 1, memory control signals are generated from Slice 2 as follows: WCK is CLK WRE is from LSR DI[3:2] for Slice 1 and DI[1:0] for Slice 0 data from Slice 2 WAD [A:D] is a 4-bit address from slice 2 LUT input Figure 2.3. Slice Diagram (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 15 ECP5TM and ECP5-5GTM Family Data Sheet Q1 F0 LUT5 Q0 F1 Q1 LUT5 F0 Q0 LUT5 F0 Q0 F1 LUT6 Q1 LUT5 F0 Q0 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA 3 SLICE Q1 F0 LUT5 Q0 LUT7 Output From Previous PFU LUT6 2 F1 Q1 SLICE SLICE Q1 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA LUT8 F0 LUT5 Q0 F1 LUT7 1 3 SLICE 2 LUT7 F1 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA LUT6 F0 LUT5 Q0 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA LUT7 1 F1 Q1 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA F1 Q1 SLICE Q0 LUT6 1 F0 LUT5 F1 SLICE SLICE Q1 F0 LUT5 Q0 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA LUT6 2 F1 Q1 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA F0 LUT5 Q0 F1 LUT6 0 Q0 LUT8 0 3 SLICE F0 LUT5 PFU Col(n+1) F1 SLICE A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA Q1 SLICE A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA LUT8 0 A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA PFU Col(n) F1 SLICE LUT7 Output To Next PFU A1 B1 C1 D1 A0 B0 C0 D0 FXB FXA Q1 SLICE PFU Col(n-1) LUT5 F0 Q0 Figure 2.4. Connectivity Supporting LUT5, LUT6, LUT7, and LUT8 Table 2.2. Slice Signal Descriptions Function Type Signal Names Description Data signal A0, B0, C0, D0 Inputs to LUT4 Input Data signal A1, B1, C1, D1 Inputs to LUT4 Input Multi-purpose M0 Multipurpose Input Input Multi-purpose M1 Multipurpose Input Input Control signal CE Clock Enable Input Control signal LSR Local Set/Reset Input Control signal CLK System Clock Input Inter-PFU signal FCI Fast Carry-in1 Input Inter-slice signal FXA Intermediate signal to generate LUT6, LUT7 and LUT82 Input Inter-slice signal FXB Intermediate signal to generate LUT6, LUT7 and LUT82 Data signals F0, F1 LUT4 output register bypass signals Output Data signals Q0, Q1 Register outputs Output Inter-PFU signal FCO Input Output Fast carry chain output1 Notes: 1. See Figure 2.3 on page 15 for connection details. 2. Requires two adjacent PFUs. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 16 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 2.2.2. Modes of Operation Slices 0-2 have up to four potential modes of operation: Logic, Ripple, RAM and ROM. Slice 3 is not needed for RAM mode, it can be used in Logic, Ripple, or ROM modes. Logic Mode In this mode, the LUTs in each slice are configured as 4-input combinatorial lookup tables. A LUT4 can have 16 possible input combinations. Any four input logic functions can be generated by programming this lookup table. Since there are two LUT4s per slice, a LUT5 can be constructed within one slice. Larger look-up tables such as LUT6, LUT7 and LUT8 can be constructed by concatenating other slices. Note that LUT8 requires more than four slices. Ripple Mode Ripple mode supports the efficient implementation of small arithmetic functions. In ripple mode, the following functions can be implemented by each slice: Addition 2-bit Subtraction 2-bit Add/Subtract 2-bit using dynamic control Up counter 2-bit Down counter 2-bit Up/Down counter with asynchronous clear Up/Down counter with preload (sync) Ripple mode multiplier building block Multiplier support Comparator functions of A and B inputs A greater-than-or-equal-to B A not-equal-to B A less-than-or-equal-to B Ripple Mode includes an optional configuration that performs arithmetic using fast carry chain methods. In this configuration (also referred to as CCU2 mode) two additional signals, Carry Generate and Carry Propagate, are generated on a per slice basis to allow fast arithmetic functions to be constructed by concatenating Slices. RAM Mode In this mode, a 16x4-bit distributed single port RAM (SPR) can be constructed in one PFU using each LUT block in Slice 0 and Slice 1 as a 16 x 2-bit memory in each slice. Slice 2 is used to provide memory address and control signals. A 16 x 2-bit pseudo dual port RAM (PDPR) memory is created in one PFU by using one Slice as the read-write port and the other companion slice as the read-only port. The slice with the read-write port updates the SRAM data contents in both slices at the same write cycle. ECP5/ECP5-5G devices support distributed memory initialization. The Lattice design tools support the creation of a variety of different size memories. Where appropriate, the software will construct these using distributed memory primitives that represent the capabilities of the PFU. Table 2.3 lists the number of slices required to implement different distributed RAM primitives. For more information about using RAM in ECP5/ECP5-5G devices, refer to TN1264, ECP5 and ECP5-5G Memory Usage Guide. Table 2.3. Number of Slices Required to Implement Distributed RAM Number of slices SPR 16 X 4 PDPR 16 X 4 3 6 Note: SPR = Single Port RAM, PDPR = Pseudo Dual Port RAM ROM Mode ROM mode uses the LUT logic; hence, Slices 0 through 3 can be used in ROM mode. Preloading is accomplished through the programming interface during PFU configuration. For more information, refer to TN1264, ECP5 and ECP5-5G Memory Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 17 ECP5TM and ECP5-5GTM Family Data Sheet 2.3. Routing There are many resources provided in the ECP5/ECP5-5G devices to route signals individually or as busses with related control signals. The routing resources consist of switching circuitry, buffers and metal interconnect (routing) segments. The ECP5/ECP5-5G family has an enhanced routing architecture that produces a compact design. The Diamond design software tool suites take the output of the synthesis tool and places and routes the design. 2.4. Clocking Structure ECP5/ECP5-5G clocking structure consists of clock synthesis blocks (sysCLOCK PLL); balanced clock tree networks (PCLK and ECLK trees); and efficient clock logic modules (CLOCK DIVIDER and Dynamic Clock Select (DCS), Dynamic Clock Control (DCC) and DLL). All of these functions are described below. 2.4.1. sysCLOCK PLL The sysCLOCK PLLs provide the ability to synthesize clock frequencies. The devices in the ECP5/ECP5-5G family support two to four full-featured General Purpose PLLs. The sysCLOCK PLLs provide the ability to synthesize clock frequencies. The architecture of the PLL is shown in Figure 2.5. A description of the PLL functionality follows. CLKI is the reference frequency input to the PLL and its source can come from two different external CLK inputs or from internal routing. A non-glitchless 2-to-1 input multiplexor is provided to dynamically select between two different external reference clock sources. The CLKI input feeds into the input Clock Divider block. CLKFB is the feedback signal to the PLL which can come from internal feedback path, routing or an external I/O pin. The feedback divider is used to multiply the reference frequency and thus synthesize a higher frequency clock output. The PLL has four clock outputs CLKOP, CLKOS, CLKOS2 and CLKOS3. Each output has its own output divider, thus allowing the PLL to generate different frequencies for each output. The output dividers can have a value from 1 to 128. The CLKOP, CLKOS, CLKOS2, and CLKOS3 outputs can all be used to drive the primary clock network. Only CLKOP and CLKOS outputs can go to the edge clock network. The setup and hold times of the device can be improved by programming a phase shift into the CLKOS, CLKOS2, and CLKOS3 output clocks which will advance or delay the output clock with reference to the CLKOP output clock. This phase shift can be either programmed during configuration or can be adjusted dynamically using the PHASESEL, PHASEDIR, PHASESTEP, and PHASELOADREG ports. The LOCK signal is asserted when the PLL determines it has achieved lock and de-asserted if a loss of lock is detected. PHASESEL[1:0] PHASEDIR PHASESTEP PHASELOADREG PLLREFCS Dynamic Phase Adjust SEL CLKOP Divider (1-128 ) CLKOP CLKOS Divider (1-128 ) CLKOS VCO CLKOS2 Divider (1-128 ) CLKOS2 VCO CLKOS3 Divider (1-128 ) CLKOS3 VCO Refclk CLK0 PLLCSOUT CLKI CLKI2 CLK1 Refclk Divider M CLKI Phase Detector, VCO, and Loop Filter FBKSEL CLKFB Feedback Clock Divider VCO Internal Feedback CLKOP, CLKOS, CLKOS2, CLKOS3 ENCLKOP ENCLKOS ENCLKOS2 ENCLKOS3 RST STDBY Lock Detect LOCK Figure 2.5. General Purpose PLL Diagram (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 18 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 2.4 provides a description of the signals in the PLL blocks. Table 2.4. PLL Blocks Signal Descriptions Signal Type Description CLKI Input Clock Input to PLL from external pin or routing CLKI2 Input Muxed clock input to PLL SEL Input Input Clock select, selecting from CLKI and CLKI2 inputs CLKFB Input PLL Feedback Clock PHASESEL[1:0] Input Select which output to be adjusted on Phase by PHASEDIR, PHASESTEP, PHASELODREG PHASEDIR Input Dynamic Phase adjustment direction. PHASESTEP Input Dynamic Phase adjustment step. Input Load dynamic phase adjustment values into PLL. PHASELOADREG CLKOP Output Primary PLL output clock (with phase shift adjustment) CLKOS Output Secondary PLL output clock (with phase shift adjust) CLKOS2 Output Secondary PLL output clock2 (with phase shift adjust) CLKOS3 Output Secondary PLL output clock3 (with phase shift adjust) LOCK Output PLL LOCK to CLKI, Asynchronous signal. Active high indicates PLL lock STDBY Input Standby signal to power down the PLL RST Input Resets the PLL ENCLKOP Input Enable PLL output CLKOP ENCLKOS Input Enable PLL output CLKOS ENCLKOS2 Input Enable PLL output CLKOS2 ENCLKOS3 Input Enable PLL output CLKOS3 For more details on the PLL you can refer to the TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. 2.5. Clock Distribution Network There are two main clock distribution networks for any member of the ECP5/ECP5-5G product family, namely Primary Clock (PCLK) and Edge Clock (ECLK). These clock networks have the clock sources come from many different sources, such as Clock Pins, PLL outputs, DLLDEL outputs, Clock divider outputs, SERDES/PCS clocks and some on chip generated clock signal. There are clock dividers (CLKDIV) blocks to provide the slower clock from these clock sources. ECP5/ECP5-5G also supports glitchless dynamic enable function (DCC) for the PCLK Clock to save dynamic power. There are also some logics to allow dynamic glitchless selection between two clocks for the PCLK network (DCS). Overview of Clocking Network is shown in Figure 2.6 on page 20 for LFE5UM/LFE5UM5G-85 device. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 19 ECP5TM and ECP5-5GTM Family Data Sheet PIO PLL 12 DCC Bank 7 Edge Clocks PLL Quadrant TL Primary Clocks 12 Primary Sources 16 PIO PIO DLL 14 Primary Sources 14 DCC Fabric Entry Fabric Entry 16 16 Primary Sources Quadrant BL 14 Primary Clocks PCSCLKDIV PCSCLKDIV SERDES DCU0 CLK DIV CLK DIV PLL Mid MUX Bank 8 Mid MUX Quadrant BR 16 DCC PLL DLL 14 DCC Edge Clocks Bank 6 16 14 Primary Sources Center MUX Bank 3 Primary Clocks 16 PIO PIO 14 Fabric Entry Quadrant TR PIO Mid MUX Fabric Entry Primary Clocks PIO PIO Bank 1 PIO Edge Clocks PIO Bank 2 CLK DIV PIO Mid MUX Edge Clocks CLK DIV PIO Bank 0 DLL SERDES DCU1 Bank 4 DLL Figure 2.6. LFE5UM/LFE5UM5G-85 Clocking 2.5.1. Primary Clocks The ECP5/ECP5-5G device family provides low-skew, high fanout clock distribution to all synchronous elements in the FPGA fabric through the Primary Clock Network. The primary clock network is divided into four clocking quadrants: Top Left (TL), Bottom Left (BL), Top Right (TR), and Bottom Right (BR). Each of these quadrants has 16 clocks that can be distributed to the fabric in the quadrant. The Lattice Diamond software can automatically route each clock to one of the four quadrants up to a maximum of 16 clocks per quadrant. The user can change how the clocks are routed by specifying a preference in the Lattice Diamond software to locate the clock to specific. The ECP5/ECP5-5G device provides the user with a maximum of 64 unique clock input sources that can be routed to the primary Clock network. Primary clock sources are: Dedicated clock input pins PLL outputs CLKDIV outputs Internal FPGA fabric entries (with minimum general routing) SERDES/PCS/PCSDIV clocks OSC clock These sources are routed to one of four clock switches called a Mid Mux. The outputs of the Mid MUX are routed to the center of the FPGA where another clock switch, called the Center MUX, is used to route the primary clock sources to primary clock distribution to the ECP5/ECP5-5G fabric. These routing muxes are shown in Figure 2.6. Since there is a maximum of 60 unique clock input sources to the clocking quadrants, there are potentially 64 unique clock domains that can be used in the ECP5/ECP5-5G Device. For more information about the primary clock tree and connections, refer to TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. Dynamic Clock Control The Dynamic Clock Control (DCC), Quadrant Clock enable/disable feature allows internal logic control of the quadrant primary clock network. When a clock network is disabled, the clock signal is static and not toggle. All the logic fed by that clock will not toggle, reducing the overall power consumption of the device. The disable function will not create glitch and increase the clock latency to the primary clock network. This DCC controls the clock sources from the Primary CLOCK MIDMUX before they are fed to the Primary Center MUXs that drive the quadrant clock network. For more information about the DCC, refer to TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 20 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Dynamic Clock Select The Dynamic Clock Select (DCS) is a smart multiplexer function available in the primary clock routing. It switches between two independent input clock sources. Depending on the operation modes, it switches between two (2) independent input clock sources either with or without any glitches. This is achieved regardless of when the select signal is toggled. Both input clocks must be running to achieve functioning glitch-less DCS output clock, but it is not required running clocks when used as non-glitch-less normal clock multiplexer. There are two DCS blocks per device that are fed to all quadrants. The inputs to the DCS block come from all the output of MIDMUXs and Clock from CIB located at the center of the PLC array core. The output of the DCS is connected to one of the inputs of Primary Clock Center MUX. Figure 2.7 shows the timing waveforms of the default DCS operating mode. The DCS block can be programmed to other modes. For more information about the DCS, refer to TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. CLK0 CLK1 SEL CLKO Figure 2.7. DCS Waveforms 2.5.2. Edge Clock ECP5/ECP5-5G devices have a number of high-speed edge clocks that are intended for use with the PIOs in the implementation of high-speed interfaces. There are two ECLK networks per bank IO on the Left and Right sides of the devices. Each Edge Clock can be sourced from the following: Dedicated Clock input pins (PCLK) DLLDEL output (Clock delayed by 90o) PLL outputs (CLKOP and CLKOS) ECLKBRIDGE Internal Nodes (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 21 ECP5TM and ECP5-5GTM Family Data Sheet Top Left / Right PCLK Pin From ECLK of other bank on same side Top Left / Right DLLDEL Output Top Right / Left PLL CLKOP From ECLKBRIDGE Top Right / Left PLL CLKOS ECLK Tree ECLKSYNC Bottom Right / Left PLL CLKOP Bottom Right / Left PLL CLKOS Bottom Left / Right PCLK Pin To ECLK of other bank on same side Bottom Left / Right DLLDEL Output To ECLKBRIDGE to go to other side From Routing Figure 2.8. Edge Clock Sources per Bank The edge clocks have low injection delay and low skew. They are used for DDR Memory or Generic DDR interfaces. For detailed information on Edge Clock connections, refer to TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. 2.6. Clock Dividers ECP5/ECP5-5G devices have two clock dividers, one on the left side and one on the right side of the device. These are intended to generate a slower-speed system clock from a high-speed edge clock. The block operates in a /2, /3.5 mode and maintains a known phase relationship between the divided down clock and the high-speed clock based on the release of its reset signal. The clock dividers can be fed from selected PLL outputs, external primary clock pins multiplexed with the DDRDEL Slave Delay or from routing. The clock divider outputs serve as primary clock sources and feed into the clock distribution network. The Reset (RST) control signal resets input and asynchronously forces all outputs to low. The SLIP signal slips the outputs one cycle relative to the input clock. For further information on clock dividers, refer to TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. Figure 2.9 shows the clock divider connections. Primary Clock Pin OR DLLDEL output clock PLL clock output (CLKOP/CLKOS) Primary Clock Tree OR Routing CLKDIV (/2 or /3.5) To Primary Clock Tree OR Routing RST SLIP Figure 2.9. ECP5/ECP5-5G Clock Divider Sources (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 22 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 2.7. DDRDLL Every DDRDLL (master DLL block) can generate phase shift code representing the amount of delay in a delay block that corresponding to 90 phase of the reference clock input. The reference clock can be either from PLL, or input pin. This code is used in the DQSBUF block that controls a set of DQS pin groups to interface with DDR memory (slave DLL). There are two DDRDLLs that supply two sets of codes (for two different reference clock frequencies) to each side of the I/Os (at each of the corners). The DQSBUF uses this code to controls the DQS input of the DDR memory to 90 shift to clock DQs at the center of the data eye for DDR memory interface. The code is also sent to another slave DLL, DLLDEL, that takes a clock input and generates a 90 shift clock output to drive the clocking structure. This is useful to interface edge-aligned Generic DDR, where 90 clocking needs to be created. Figure 2.10 shows DDRDLL functional diagram. DDRDLL CLK DDRDEL RST LOCK UDDCNTLN DCNTL[7:0] FREEZE Figure 2.10. DDRDLL Functional Diagram Table 2.5. DDRDLL Ports List Port Name Type Description CLK Input Reference clock input to the DDRDLL. Should run at the same frequency as the clock to the delay code. RST Input Reset Input to the DDRDLL. UDDCNTLN Input FREEZE Input DDRDEL Output Update Control to update the delay code. The code is the DCNTL[7:0] outputs. These outputs are updated when the UDDCNTLN signal is LOW. FREEZE goes high and, without a glitch, turns off the DLL internal clock and the ring oscillator output clock. When FREEZE goes low, it turns them back on. The delay codes from the DDRDLL to be used in DQSBUF or DLLDEL. LOCK Output Lock output to indicate the DDRDLL has valid delay output. DCNTL [7:0] Output The delay codes from the DDRDLL available for the user IP. There are four identical DDRDLLs, one in each of the four corners in LFE5-85 and LFE5-45 devices, and two DDRDLLs in both LFE5-25 & LFE5-12 devices in the upper two corners. Each DDRDLL can generate delay code based on the reference frequency. The slave DLL (DQSBUF and DLLDEL) use the code to delay the signal, to create the phase shifted signal used for either DDR memory, to create 90 shift clock. Figure 2.11 shows the DDRDLL and the slave DLLs on the top level view. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 23 ECP5TM and ECP5-5GTM Family Data Sheet ASICIO Buffer ASICIO Buffer DDR DLL DDR DLL PIC PIC PIC PIC PIC LFE5 Device DQSBUF DLLDEL sysIO Buffer PIC PIC DLLDEL DDR DLL PIC sysIO Buffer DLLDEL sysIO Buffer DLLDEL DQSBUF PIC DQSBUF DQSBUF sysIO Buffer PIC DLLDEL DLLDEL PIC PIC PIC PIC PIC PIC Config IO SERDES Block DDR DLL Figure 2.11. ECP5/ECP5-5G DLL Top Level View (For LFE-45 and LFE-85) 2.8. sysMEM Memory ECP5/ECP5-5G devices contain a number of sysMEM Embedded Block RAM (EBR). The EBR consists of an 18 Kb RAM with memory core, dedicated input registers and output registers with separate clock and clock enable. Each EBR includes functionality to support true dual-port, pseudo dual-port, single-port RAM, ROM and FIFO buffers (via external PFUs). 2.8.1. sysMEM Memory Block The sysMEM block can implement single port, dual port or pseudo dual port memories. Each block can be used in a variety of depths and widths as listed in Table 2.6 on page 25. FIFOs can be implemented in sysMEM EBR blocks by implementing support logic with PFUs. The EBR block facilitates parity checking by supporting an optional parity bit for each data byte. EBR blocks provide byte-enable support for configurations with 18-bit and 36-bit data widths. For more information, refer to TN1264, ECP5 and ECP5-5G Memory Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 24 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 2.6. sysMEM Block Configurations Memory Mode Configurations Single Port 16,384 x 1 8,192 x 2 4,096 x 4 2,048 x 9 1,024 x 18 512 x 36 True Dual Port 16,384 x 1 8,192 x 2 4,096 x 4 2,048 x 9 1,024 x 18 Pseudo Dual Port 16,384 x 1 8,192 x 2 4,096 x 4 2,048 x 9 1,024 x 18 512 x 36 2.8.2. Bus Size Matching All of the multi-port memory modes support different widths on each of the ports. The RAM bits are mapped LSB word 0 to MSB word 0, LSB word 1 to MSB word 1, and so on. Although the word size and number of words for each port varies, this mapping scheme applies to each port. 2.8.3. RAM Initialization and ROM Operation If desired, the contents of the RAM can be pre-loaded during device configuration. By preloading the RAM block during the chip configuration cycle and disabling the write controls, the sysMEM block can also be utilized as a ROM. 2.8.4. Memory Cascading Larger and deeper blocks of RAM can be created using EBR sysMEM Blocks. Typically, the Lattice design tools cascade memory transparently, based on specific design inputs. 2.8.5. Single, Dual and Pseudo-Dual Port Modes In all the sysMEM RAM modes the input data and address for the ports are registered at the input of the memory array. The output data of the memory is optionally registered at the output. EBR memory supports the following forms of write behavior for single port or dual port operation: Normal - Data on the output appears only during a read cycle. During a write cycle, the data (at the current address) does not appear on the output. This mode is supported for all data widths. Write Through - A copy of the input data appears at the output of the same port during a write cycle. This mode is supported for all data widths. Read-Before-Write - When new data is written, the old content of the address appears at the output. This mode is supported for x9, x18, and x36 data widths. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 25 ECP5TM and ECP5-5GTM Family Data Sheet 2.8.6. Memory Core Reset The memory array in the EBR utilizes latches at the A and B output ports. These latches can be reset asynchronously or synchronously. RSTA and RSTB are local signals, which reset the output latches associated with Port A and Port B, respectively. The Global Reset (GSRN) signal can reset both ports. The output data latches and associated resets for both ports are as shown in Figure 2.12. Memory Core D SET Q Port A[17:0] LCLR Output Data Latches D SET Q Port B[17:0] LCLR RSTA RSTB GSRN Programmable Disable Figure 2.12. Memory Core Reset For further information on the sysMEM EBR block, see the list of technical documentation in Supplemental Information section on page 104. 2.9. sysDSPTM Slice The ECP5/ECP5-5G family provides an enhanced sysDSP architecture, making it ideally suited for low-cost, high-performance Digital Signal Processing (DSP) applications. Typical functions used in these applications are Finite Impulse Response (FIR) filters, Fast Fourier Transforms (FFT) functions, Correlators, Reed-Solomon/Turbo/Convolution encoders and decoders. These complex signal processing functions use similar building blocks such as multiply-adders and multiply-accumulators. 2.9.1. sysDSP Slice Approach Compared to General DSP Conventional general-purpose DSP chips typically contain one to four (Multiply and Accumulate) MAC units with fixed data-width multipliers; this leads to limited parallelism and limited throughput. Their throughput is increased by higher clock speeds. In the ECP5/ECP5-5G device family, there are many DSP slices that can be used to support different data widths. This allows designers to use highly parallel implementations of DSP functions. Designers can optimize DSP performance vs. area by choosing appropriate levels of parallelism. Figure 2.13 compares the fully serial implementation to the mixed parallel and serial implementation. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 26 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Operand A Operand A Operand B Operand A Single Multiplier Operand A Operand B Operand B Operand B x M loops x Multiplier 0 x x Multiplier 1 m/k loops Multiplier k Accumulator Function Implemented in General Purpose DSP (k adds) + m/k accumulate Output Function Implemented in ECP5/ECP5-5G Figure 2.13. Comparison of General DSP and ECP5/ECP5-5G Approaches 2.9.2. sysDSP Slice Architecture Features The ECP5/ECP5-5G sysDSP Slice has been significantly enhanced to provide functions needed for advanced processing applications. These enhancements provide improved flexibility and resource utilization. The ECP5/ECP5-5G sysDSP Slice supports many functions that include the following: Symmetry support. The primary target application is wireless. 1D Symmetry is useful for many applications that use FIR filters when their coefficients have symmetry or asymmetry characteristics. The main motivation for using 1D symmetry is cost/size optimization. The expected size reduction is up to 2x. Odd mode - Filter with Odd number of taps Even mode - Filter with Even number of taps Two dimensional (2D) symmetry mode - supports 2D filters for mainly video applications Dual-multiplier architecture. Lower accumulator overhead to half and the latency to half compared to single multiplier architecture Fully cascadable DSP across slices. Support for symmetric, asymmetric and non-symmetric filters. Multiply (one 18x36, two 18x18 or four 9x9 Multiplies per Slice) Multiply (36x36 by cascading across two sysDSP slices) Multiply Accumulate (supports one 18x36 multiplier result accumulation or two 18x18 multiplier result accumulation) Two Multiplies feeding one Accumulate per cycle for increased processing with lower latency (two 18x18 Multiplies feed into an accumulator that can accumulate up to 52 bits) Pipeline registers 1D Symmetry support. The coefficients of FIR filters have symmetry or negative symmetry characteristics. Odd mode - Filter with Odd number of taps Even mode - Filter with Even number of taps 2D Symmetry support. The coefficients of 2D FIR filters have symmetry or negative symmetry characteristics. 3*3 and 3*5 - Internal DSP Slice support (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 27 ECP5TM and ECP5-5GTM Family Data Sheet 5*5 and larger size 2D blocks - Semi internal DSP Slice support Flexible saturation and rounding options to satisfy a diverse set of applications situations Flexible cascading across DSP slices Minimizes fabric use for common DSP and ALU functions Enables implementation of FIR Filter or similar structures using dedicated sysDSP slice resources only Provides matching pipeline registers Can be configured to continue cascading from one row of sysDSP slices to another for longer cascade chains Flexible and Powerful Arithmetic Logic Unit (ALU) Supports: Dynamically selectable ALU OPCODE Ternary arithmetic (addition/subtraction of three inputs) Bit-wise two-input logic operations (AND, OR, NAND, NOR, XOR and XNOR) Eight flexible and programmable ALU flags that can be used for multiple pattern detection scenarios, such as, overflow, underflow and convergent rounding. Flexible cascading across slices to get larger functions RTL Synthesis friendly synchronous reset on all registers, while still supporting asynchronous reset for legacy users Dynamic MUX selection to allow Time Division Multiplexing (TDM) of resources for applications that require processor-like flexibility that enables different functions for each clock cycle For most cases, as shown in Figure 2.14, the ECP5/ECP5-5G sysDSP slice is backwards-compatible with the LatticeECP2TM and LatticeECP3TM sysDSP block, such that, legacy applications can be targeted to the ECP5/ ECP5-5G sysDSP slice. Figure 2.14 shows the diagram of sysDSP, and Figure 2.15 shows the detailed diagram. ALU24 ALU24 ALU24 ALU24 PR0 (36) PR1 (36) PR2 (36) PR3 (36) 9x9 9x9 Mult18-1 9x9 Mult18-2 9x9 9x9 One of these Mult18-0 9x9 Mult18-1 36x36 (Mult36) In Reg B 1 9+/-9 9+/-9 9+/-9 In Reg A 1 In Reg B 0 In Reg B 1 9+/-9 18+/-18 MUA1[17:0] MUB0[17:0] MUA0[17:0] C0[53:0] 18+/-18 9+/-9 In Reg A 0 9+/-9 9+/-9 18+/-18 Casc A1 9+/-9 18+/-18 MUB3[17:0] In Reg B 0 Casc A0 MUA3[17:0] In Reg A 1 MUA2[17:0] 18 In Reg A 0 SIGNEDA[3:0] SIGNEDB[3:0] SOURCEA[3:0] SOURCEB[3:0] GSR MUB2[17:0] 18 Flags[7:0] 18 18 SROA[17:0] SROB[17:0] One of these 9x9 COUT[53:0] (hardwired cascade to right DSP) To DSP Block on Right and to CIB Outputs C0[53:0] 9x9 One of these OutB3 (18) OutA3 (18) MUP3[17:0] MUP2[35:18] OutB2 (18) OutA2 (18) MUP2[17:0] MUP1[35:18] OutB1 (18) OutA1 (18) Accumulator/ALU (54) MUB1[17:0] SRIA[17:0] SRIB[17:0] Hardwired from DSP Block on Left OutB0 (18) Accumulator/ALU (54) CLK[3:0] CE[3:0] RST[3:0] DYNOP0[10:0], DYNOP1[10:0] MUP1[17:0] MUP0[35:18] MUP0[17:0] OutA0 (18) CIN[53:0] (hardwired cascade from left DSP) MUP3[35:18] SLICE 1 SLICE 0 Figure 2.14. Simplified sysDSP Slice Block Diagram (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 28 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet MUIA0 MUIB0 INT_A OPCODE_PA MUIA1 MUIB1 INT_B IR INT_B SRIBK_PA IR IR IR IR +/= DSP PreAdder Logic +/- OPA0 C INT_A DYNOP OPA1 SROA SRIA IR IR IR IR SRIB IR MULTA IR IR PR PR PR B ALU A ALU 0 0 AMUX Shift 18L BMUX R= A B C R = Logic (B, C) CMUX C_ALU CIN SROB MULTB COUT ALU == OR OR FR OR DSP Core Logic MUOP0 R FLAGS MUOP1 DSP SLICE Figure 2.15. Detailed sysDSP Slice Diagram (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 29 ECP5TM and ECP5-5GTM Family Data Sheet In Figure 2.15, note that A_ALU, B_ALU and C_ALU are internal signals generated by combining bits from AA, AB, BA BB and C inputs. For further information, refer to TN1267, ECP5 and ECP5-5G sysDSP Usage Guide. The ECP5/ECP5-5G sysDSP block supports the following basic elements. MULT (Multiply) MAC (Multiply, Accumulate) MULTADDSUB (Multiply, Addition/Subtraction) MULTADDSUBSUM (Multiply, Addition/Subtraction, Summation) Table 2.7 shows the capabilities of each of the ECP5/ECP5-5G slices versus the above functions. Table 2.7. Maximum Number of Elements in a Slice Width of Multiply x9 x18 x36 MULT 4 2 1/2 MAC 1 1 -- MULTADDSUB 2 1 -- MULTADDSUBSUM 1* 1/2 -- *Note: One slice can implement 1/2 9x9 m9x9addsubsum and two m9x9addsubsum with two slices. Some options are available in the four elements. The input register in all the elements can be directly loaded or can be loaded as a shift register from previous operand registers. By selecting "dynamic operation" the following operations are possible: In the Add/Sub option the Accumulator can be switched between addition and subtraction on every cycle. The loading of operands can switch between parallel and serial operations. For further information, refer to TN1267, ECP5 and ECP5-5G sysDSP Usage Guide. 2.10. Programmable I/O Cells The programmable logic associated with an I/O is called a PIO. The individual PIO are connected to their respective sysIO buffers and pads. On the ECP5/ECP5-5G devices, the Programmable I/O cells (PIC) are assembled into groups of four PIO cells called a Programmable I/O Cell or PIC. The PICs are placed on all four sides of the device. On all the ECP5/ECP5-5G devices, two adjacent PIOs can be combined to provide a complementary output driver pair. All PIO pairs can implement differential receivers. Half of the PIO pairs on the left and right edges of these devices can be configured as true LVDS transmit pairs. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 30 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 1 PIC PIO A Input Register Block Output and Tristate Register Block Pin A PIO B Input Register Block Input Gearbox Core Logic / Routing Output Gearbox Output and Tristate Register Block Pin B PIO C Input Register Block Output and Tristate Register Block Pin C PIO D Input Register Block Output and Tristate Register Block Pin D Figure 2.16. Group of Four Programmable I/O Cells on Left/Right Sides (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 31 ECP5TM and ECP5-5GTM Family Data Sheet 2.11. PIO The PIO contains three blocks: an input register block, output register block, and tristate register block. These blocks contain registers for operating in a variety of modes along with the necessary clock and selection logic. 2.11.1. Input Register Block The input register blocks for the PIOs on all edges contain delay elements and registers that can be used to condition high-speed interface signals before they are passed to the device core. In addition, the input register blocks for the PIOs on the left and right edges include built-in FIFO logic to interface to DDR and LPDDR memory. The Input register block on the right and left sides includes gearing logic and registers to implement IDDRX1 and IDDRX2 functions. With two PICs sharing the DDR register path, it can also implement IDDRX71 function used for 7:1 LVDS interfaces. It uses three sets of registers to shift, update, and transfer to implement gearing and the clock domain transfer. The first stage registers samples the high-speed input data by the high-speed edge clock on its rising and falling edges. The second stage registers perform data alignment based on the control signals. The third stage pipeline registers pass the data to the device core synchronized to the low-speed system clock. The top side of the device supports IDDRX1 gearing function. For more information on gearing function, refer to TN1265, ECP5 and ECP5-5G HighSpeed I/O Interface. Figure 2.17 shows the input register block for the PIOs on the top edge. D INCK INFF Programmable Delay Cell Q INFF IDDRX1 SCLK RST Q[1:0] Figure 2.17. Input Register Block for PIO on Top Side of the Device Figure 2.18 shows the input register block for the PIOs located on the left and right edges. D INCK INFF Programmable Delay Cell INFF Q FIFO Delayed DQS ECLK SCLK RST ALIGNWD ECLK Generic IDDRX1 IDDRX2 IDDRX71* Q[1:0]/ Q[3:0]/ Q[6:0]* Memory IDDRX2 *For 7:1 LVDS interface only. It is required to use PIO pair pins (PIOA/B or PIOC/D). Figure 2.18. Input Register Block for PIO on Left and Right Side of the Device (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 32 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Input FIFO The ECP5/ECP5-5G PIO has dedicated input FIFO per single-ended pin for input data register for DDR Memory interfaces. The FIFO resides before the gearing logic. It transfers data from DQS domain to continuous ECLK domain. On the Write side of the FIFO, it is clocked by DQS clock which is the delayed version of the DQS Strobe signal from DDR memory. On the Read side of FIFO, it is clocked by ECLK. ECLK may be any high speed clock with identical frequency as DQS (the frequency of the memory chip). Each DQS group has one FIFO control block. It distributes FIFO read/write pointer to every PIC in same DQS group. DQS Grouping and DQS Control Block is described in DDR Memory Support section on page 35. Table 2.8. Input Block Port Description Name D Q[1:0]/Q[3:0]/Q[6:0] Type Description Input High Speed Data Input Output Low Speed Data to the device core RST Input Reset to the Output Block SCLK Input Slow Speed System Clock ECLK Input High Speed Edge Clock DQS Input Clock from DQS control Block used to clock DDR memory data ALIGNWD Input Data Alignment signal from device core. 2.11.2. Output Register Block The output register block registers signal from the core of the device before they are passed to the sysIO buffers. ECP5/ECP5-5G output data path has output programmable flip flops and output gearing logic. On the left and right sides the output register block can support 1x, 2x and 7:1 gearing enabling high speed DDR interfaces and DDR memory interfaces. On the top side, the banks support 1x gearing. ECP5/ECP5-5G output data path diagram is shown in Figure 2.19. The programmable delay cells are also available in the output data path. For detailed description of the output register block modes and usage, refer to TN1265, ECP5 and ECP5-5G High-Speed I/O Interface. Programmable Delay Cell D OUTFF RST SCLK D[1:0] Q Generic ODDRX1 Figure 2.19. Output Register Block on Top Side (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 33 ECP5TM and ECP5-5GTM Family Data Sheet Programmable Delay Cell D Q OUTFF RST SCLK Generic ODDRX1/ ODDRX2/ ODDR71* ECLK DQSW DQSW270 Memory ODDRX2 OSHX2 D[1:0]/ D[3:0]/ D[6:0]* *For 7:1 LVDS interface only. It is required to use PIO pair pins PIOA/B. Figure 2.20. Output Register Block on Left and Right Sides Table 2.9. Output Block Port Description Name Type Description Q Output High Speed Data Output D Input Data from core to output SDR register D[1:0]/D[3:0]/ D[6:0] Input Low Speed Data from device core to output DDR register RST Input Reset to the Output Block SCLK Input Slow Speed System Clock ECLK Input High Speed Edge Clock DQSW Input Clock from DQS control Block used to generate DDR memory DQS output DQSW270 Input Clock from DQS control Block used to generate DDR memory DQ output 2.12. Tristate Register Block The tristate register block registers tristate control signals from the core of the device before they are passed to the sysIO buffers. The block contains a register for SDR operation. In SDR, TD input feeds one of the flip-flops that then feeds the output. In DDR operation used mainly for DDR memory interface can be implemented on the left and right sides of the device. Here two inputs feed the tristate registers clocked by both ECLK and SCLK. Figure 2.21 and Figure 2.22 show the Tristate Register Block functions on the device. For detailed description of the tristate register block modes and usage, refer to TN1265, ECP5 and ECP5-5G High-Speed I/O Interface. TQ TD RST SCLK TSFF Figure 2.21. Tristate Register Block on Top Side (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 34 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet TQ TD TSFF RST SCLK ECLK THSX2 DQSW DQSW270 T[1:0] Figure 2.22. Tristate Register Block on Left and Right Sides Table 2.10. Tristate Block Port Description Name Type Description TD Input Tristate Input to Tristate SDR Register RST Input Reset to the Tristate Block TD[1:0] Input Tristate input to TSHX2 function SCLK Input Slow Speed System Clock ECLK Input High Speed Edge Clock DQSW Input Clock from DQS control Block used to generate DDR memory DQS output DQSW270 Input Clock from DQS control Block used to generate DDR memory DQ output TQ Output Output of the Tristate block 2.13. DDR Memory Support 2.13.1. DQS Grouping for DDR Memory Certain PICs have additional circuitry to allow the implementation of high-speed source synchronous and DDR2, DDR3, LPDDR2 or LPDDR3 memory interfaces. The support varies by the edge of the device as detailed below. The left and right sides of the PIC have fully functional elements supporting DDR2, DDR3, LPDDR2 or LPDDR3 memory interfaces. Every 16 PIOs on the left and right sides are grouped into one DQS group, as shown in Figure 2.23 on page 36. Within each DQS group, there are two pre-placed pins for DQS and DQS# signals. The rest of the pins in the DQS group can be used as DQ signals and DM signal. The number of pins in each DQS group bonded out is package dependent. DQS groups with less than 11 pins bonded out can only be used for LPDDR2/3 Command/ Address busses. In DQS groups with more than 11 pins bonded out, up to two pre-defined pins are assigned to be used as "virtual" VCCIO, by driving these pins to HIGH, with the user connecting these pins to VCCIO power supply. These connections create "soft" connections to VCCIO thru these output pins, and make better connections on VCCIO to help to reduce SSO noise. For details, refer to TN1265, ECP5 and ECP5-5G High-Speed I/O Interface. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 35 ECP5TM and ECP5-5GTM Family Data Sheet DQS PIO A sysIO Buffer Pad A (T) PIO B sysIO Buffer Pad B (C) PIO C sysIO Buffer Pad C PIO D sysIO Buffer Pad D PIO A sysIO Buffer Pad A (T) PIO B sysIO Buffer Pad B (C) PIO C sysIO Buffer Pad C PIO D sysIO Buffer Pad D DQSBUF Delay PIO A sysIO Buffer Pad A (T) PIO B sysIO Buffer Pad B (C) PIO C sysIO Buffer Pad C PIO D sysIO Buffer Pad D PIO A sysIO Buffer Pad A (T) PIO B sysIO Buffer Pad B (C) PIO C sysIO Buffer Pad C PIO D sysIO Buffer Pad D Figure 2.23. DQS Grouping on the Left and Right Edges 2.13.2. DLL Calibrated DQS Delay and Control Block (DQSBUF) To support DDR memory interfaces (DDR2/3, LPDDR2/3), the DQS strobe signal from the memory must be used to capture the data (DQ) in the PIC registers during memory reads. This signal is output from the DDR memory device aligned to data transitions and must be time shifted before it can be used to capture data in the PIC. This time shifted is achieved by using DQSDEL programmable delay line in the DQS Delay Block (DQS read circuit). The DQSDEL is implemented as a slave delay line and works in conjunction with a master DDRDLL. This block also includes slave delay line to generate delayed clocks used in the write side to generate DQ and DQS with correct phases within one DQS group. There is a third delay line inside this block used to provide write leveling feature for DDR write if needed. Each of the read and write side delays can be dynamically shifted using margin control signals that can be controlled by the core logic. FIFO Control Block shown in Figure 2.24 generates the Read and Write Pointers for the FIFO block inside the Input Register Block. These pointers are generated to control the DQS to ECLK domain crossing using the FIFO module. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 36 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Preamble/Postamble Management & Burst Detect DQS READ[1:0] BURSTDET DATAVALID READCLKSEL[1:0] FIFO Control & Datavalid Generation ECLK SCLK RDPNTR[2:0] WRPNTR[2:0] DQSDEL (90 Deg. Delay Code from DDRDLL) Read Side Slave Delay with Dynamic Margin Control RDLOADN, RDMOVE, RDDIRECTION (Read Side Dynamic Margin Control) DQSR90 (Read Side) DQSW (Write Side) WRLOADN, WRMOVE, WRDIRECTION (Write Side Dynamic Margin Control) Write Side Slave Delay with Dynamic Margin Control DQSW270 (Write Side) RDCFLAG WRCFLAG PAUSE DYNDELAY[7:0] (Write Leveling delay) Write Leveling Figure 2.24. DQS Control and Delay Block (DQSBUF) Table 2.11. DQSBUF Port List Description Name Type Description DQS Input DDR memory DQS strobe READ[1:0] Input Read Input from DDR Controller READCLKSEL[1:0] Input Read pulse selection SCLK Input Slow System Clock ECLK Input High Speed Edge Clock (same frequency as DDR memory) DQSDEL Input 90 Delay Code from DDRDLL RDLOADN, RDMOVE, RDDIRECTION Input Dynamic Margin Control ports for Read delay WRLOADN, WRMOVE, WRDIRECTION Input Dynamic Margin Control ports for Write delay PAUSE Input DYNDELAY[7:0] Input Used by DDR Controller to Pause write side signals during DDRDLL Code update or Write Leveling Dynamic Write Leveling Delay Control DQSR90 Output 90 delay DQS used for Read DQSW270 Output 90 delay clock used for DQ Write DQSW Output Clock used for DQS Write RDPNTR[2:0] Output Read Pointer for IFIFO module WRPNTR[2:0] Output Write Pointer for IFIFO module DATAVALID Output Signal indicating start of valid data BURSTDET Output Burst Detect indicator RDFLAG Output Read Dynamic Margin Control output to indicate max value WRFLAG Output Write Dynamic Margin Control output to indicate max value (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 37 ECP5TM and ECP5-5GTM Family Data Sheet 2.14. sysI/O Buffer Each I/O is associated with a flexible buffer referred to as a sysI/O buffer. These buffers are arranged around the periphery of the device in groups referred to as banks. The sysI/O buffers allow users to implement the wide variety of standards that are found in today's systems including LVDS, HSUL, BLVDS, SSTL Class I and II, LVCMOS, LVTTL, LVPECL, and MIPI. 2.14.1. sysI/O Buffer Banks ECP5/ECP5-5G devices have seven sysI/O buffer banks, two banks per side at Top, Left and Right, plus one at the bottom left side. The bottom left side bank (Bank 8) is a shared I/O bank. The I/Os in that bank contains both dedicated and shared I/O for sysConfig function. When a shared pin is not used for configuration, it is available as a user I/O. For LFE5-85 devices, there is an additional I/O bank (Bank 4) that is not available in other device in the family. In ECP5/ECP5-5G devices, the Left and Right sides are tailored to support high performance interfaces, such as DDR2, DDR3, LPDDR2, LPDDR3 and other high speed source synchronous standards. The banks on the Left and Right sides of the devices feature LVDS input and output buffers, data-width gearing, and DQSBUF block to support DDR2/3 and LPDDR2/3 interfaces. The I/Os on the top and bottom banks do not have LVDS input and output buffer, and gearing logic, but can use LVCMOS to emulate most of differential output signaling. Each sysIO bank has its own I/O supply voltage (VCCIO). In addition, the banks on the Left and Right sides of the device, have voltage reference input (shared I/O pin), VREF1 per bank, which allow it to be completely independent of each other. The VREF voltage is used to set the threshold for the referenced input buffers, such as SSTL. Figure 2.25 shows the seven banks and their associated supplies. In ECP5/ECP5-5G devices, single-ended output buffers and ratioed input buffers (LVTTL, and LVCMOS) are powered using VCCIO. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as fixed threshold inputs independent of VCCIO. TOP VREF1(1)V VCCIO1 GND VREF1(0)V VCCIO0 GND Bank 0 Bank 1 VREF1(7) GND Bank 7 Bank 2 V CCIO7 V REF1(2) GND RIGHT LEFT V CCIO2 V REF1(6) GND Bank 6 Bank 3 V CCIO6 GND V CCIO3 V REF1(3) Bank 8 CONFIG BANK Bank 4* SERDES GND V CCIO4 GND V CCIO8 BOTTOM *Note: Only 85K device has this bank. Figure 2.25. ECP5/ECP5-5G Device Family Banks (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 38 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet ECP5/ECP5-5G devices contain two types of sysI/O buffer pairs: Top (Bank 0 and Bank 1) and Bottom (Bank 8 and Bank 4) sysIO Buffer Pairs (Single-Ended Only) The sysI/O buffers in the Banks at top and bottom of the device consist of ratioed single-ended output drivers and single-ended input buffers. The I/Os in these banks are not usually used as a pair, except when used as emulated differential output pair. They are used as individual I/Os and be configured as different I/O modes, as long as they are compatible with the VCCIO voltage in the bank. When used as emulated differential outputs, the pair can be used together. The top and bottom side IOs also support hot socketing. They support IO standards from 3.3 V to 1.2 V. They are ideal for general purpose I/Os, or as ADDR/CMD bus for DDR2/DDR3 applications, or for used as emulated differential signaling. Bank 4 I/O only exists in the LFE5-85 device. Bank 8 is a bottom bank that shares with sysConfig I/Os. During configuration, these I/Os are used for programming the device. Once the configuration is completed, these I/Os can be released and user can use these I/Os for functional signals in his design. The top and bottom side pads can be identified by the Lattice Diamond tool. Left and Right (Banks 2, 3, 6 and 7) sysI/O Buffer Pairs (50% Differential and 100% Single-Ended Outputs) The sysI/O buffer pairs in the left and right banks of the device consist of two single-ended output drivers, two single-ended input buffers (both ratioed and referenced) and half of the sysI/O buffer pairs (PIOA/B pairs) also has a high-speed differential output driver. One of the referenced input buffers can also be configured as a differential input. In these banks the two pads in the pair are described as "true" and "comp", where the true pad is associated with the positive side of the differential I/O, and the comp (complementary) pad is associated with the negative side of the differential I/O. In addition, programmable on-chip input termination (parallel or differential, static or dynamic) is supported on these sides, which is required for DDR3 interface. However, there is no support for hot-socketing for the I/O pins located on the left and right side of the device as the PCI clamp is always enabled on these pins. LVDS differential output drivers are available on 50% of the buffer pairs on the left and right banks. 2.14.2. Typical sysI/O I/O Behavior during Power-up The internal Power-On-Reset (POR) signal is deactivated when VCC, VCCIO8 and VCCAUX have reached satisfactory levels. After the POR signal is deactivated, the FPGA core logic becomes active. It is the user's responsibility to ensure that all other VCCIO banks are active with valid input logic levels to properly control the output logic states of all the I/O banks that are critical to the application. For more information about controlling the output logic state with valid input logic levels during power-up in ECP5/ECP5-5G devices, see the list of technical documentation in Supplemental Information section on page 104. The VCC and VCCAUX supply the power to the FPGA core fabric, whereas the VCCIO supplies power to the I/O buffers. In order to simplify system design while providing consistent and predictable I/O behavior, it is recommended that the I/O buffers be powered-up prior to the FPGA core fabric. VCCIO supplies should be powered-up before or together with the VCC and VCCAUX supplies. 2.14.3. Supported sysI/O Standards The ECP5/ECP5-5G sysI/O buffer supports both single-ended and differential standards. Single-ended standards can be further subdivided into LVCMOS, LVTTL and other standards. The buffers support the LVTTL, LVCMOS 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V standards. In the LVCMOS and LVTTL modes, the buffer has individual configuration options for drive strength, slew rates, bus maintenance (weak pull-up, weak pull-down, or a bus-keeper latch) and open drain. Other single-ended standards supported include SSTL and HSUL. Differential standards supported include LVDS, differential SSTL and differential HSUL. For further information on utilizing the sysI/O buffer to support a variety of standards, refer to TN1262, ECP5 and ECP5-5G sysIO Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 39 ECP5TM and ECP5-5GTM Family Data Sheet 2.14.4. On-Chip Programmable Termination The ECP5/ECP5-5G devices support a variety of programmable on-chip terminations options, including: Dynamically switchable Single-Ended Termination with programmable resistor values of 50 , 75 , or 150 . Common mode termination of 100 for differential inputs. Zo = 50 V CCIO Zo = 50 , 75 , or 150 to V CCIO /2 TERM control Zo Zo 2Zo Zo + - VREF OFF-chip + - Zo OFF-chip ON-chip Parallel Single-Ended Input ON-chip Differential Input Figure 2.26. On-Chip Termination See Table 2.12 for termination options for input modes. Table 2.12. On-Chip Termination Options for Input Modes IO_TYPE Terminate to VCCIO/2* Differential Termination Resistor* LVDS25 -- 100 BLVDS25 -- 100 MLVDS -- 100 LVPECL33 -- 100 subLVDS -- 100 SLVS -- 100 50, 75, 150 -- HSUL12 HSUL12D SSTL135_I / II SSTL135D_I / II SSTL15_I / II SSTL15D_I / II SSTL18_I / II SSTL18D_I / II -- 100 50, 75, 150 -- -- 100 50, 75, 150 -- -- 100 50, 75, 150 -- -- 100 *Notes: TERMINATE to VCCIO/2 (Single-Ended) and DIFFRENTIAL TERMINATION RESISTOR when turned on can only have one setting per bank. Only left and right banks have this feature. Use of TERMINATE to VCCIO/2 and DIFFRENTIAL TERMINATION RESISTOR are mutually exclusive in an I/O bank. On-chip termination tolerance 20%. Refer to TN1262, ECP5 and ECP5-5G sysIO Usage Guide for on-chip termination usage and value ranges. 2.14.5. Hot Socketing ECP5/ECP5-5G devices have been carefully designed to ensure predictable behavior during power-up and power-down. During power-up and power-down sequences, the I/Os remain in tristate until the power supply voltage is high enough to ensure reliable operation. In addition, leakage into I/O pins is controlled within specified limits. See the Hot Socketing Specifications section on page 48. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 40 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 2.15. SERDES and Physical Coding Sublayer LFE5UM/LFE5UM5G devices feature up to 4 channels of embedded SERDES/PCS arranged in dual-channel blocks at the bottom of the devices. Each channel supports up to 3.2 Gb/s (ECP5), or up to 5 Gb/s (ECP5-5G) data rate. Figure 2.27 shows the position of the dual blocks for the LFE5-85. Table 2.13 shows the location of available SERDES Duals for all devices. The LFE5UM/LFE5UM5G SERDES/PCS supports a range of popular serial protocols, including: PCI Express Gen1 and Gen2 (2.5 Gb/s) on ECP5UM; Gen 1, Gen2 (2.5 Gb/s and 5 Gb/s) on ECP5-5G Ethernet (XAUI, GbE - 1000 Base CS/SX/LX and SGMII) SMPTE SDI (3G-SDI, HD-SDI, SD-SDI) CPRI (E.6.LV: 614.4 Mb/s, E.12.LV: 1228.8 Mb/s, E.24.LV: 2457.6 Mb/s, E.30.LV: 3072 Mb/s), also E.48.LV2:4915 Mb/s in ECP5-5G JESD204A/B - ADC and DAC converter interface: 312.5 Mb/s to 3.125 Gb/s (ECP5) / 5 Gb/s (ECP5-5G) Each dual contains two dedicated SERDES for high speed, full duplex serial data transfer. Each dual also has a PCS block that interfaces to the SERDES channels and contains protocol specific digital logic to support the standards listed above. The PCS block also contains interface logic to the FPGA fabric. All PCS logic for dedicated protocol support can also be bypassed to allow raw 8-bit or 10-bit interfaces to the FPGA fabric. Even though the SERDES/PCS blocks are arranged in duals, multiple baud rates can be supported within a dual with the use of dedicated, per channel /1, /2 and /11 rate dividers. Additionally, two duals can be arranged together to form x4 channel link. ECP5UM devices and ECP5-5G devices are pin-to-pin compatible. But, the ECP5UM devices require 1.1 V on VCCA, VCCHRX and VCCHTX supplies. ECP5-5G devices require 1.2 V on these supplies. When designing either family device with migration in mind, these supplies need to be connected such that it is possible to adjust the voltage level on these supplies. When a SERDES Dual in a 2-Dual device is not used, the power VCCA power supply for that Dual should be connected. It is advised to connect the VCCA of unused channel to core if the user knows he will not use the Dual at all, or it should be connected to a different regulated supply, if that Dual may be used in the future. For an unused channel in a Dual, it is advised to connect the VCCHTX to VCCA, and user can leave VCCHRX unconnected. For information on how to use the SERDES/PCS blocks to support specific protocols, as well on how to combine multiple protocols and baud rates within a device, refer to TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 41 ECP5TM and ECP5-5GTM Family Data Sheet sysIO Bank 3 sysIO Bank 6 sysIO Bank 2 sysIO Bank 1 sysIO Bank 7 sysIO Bank 0 CH1 SERDES/PCS Dual 1 CH0 CH1 sysIO Bank 8 CH0 SERDES/PCS Dual 0 sysIO Bank 4 Figure 2.27. SERDES/PCS Duals (LFE5UM/LFE5UM5G-85) Table 2.13. LFE5UM/LFE5UM5G SERDES Standard Support Standard Data Rate (Mb/s) Number of General/Link Width Encoding Style PCI Express 1.1 and 2.0 2.02 2500 x1, x2, x4 8b10b 5000 x1, x2 8b10b Gigabit Ethernet 1250 x1 8b10b SGMII 1250 x1 8b10b XAUI CPRI-1 CPRI-2 CPRI-3 CPRI-4 CPRI-52 SD-SDI (259M, 344M)1 HD-SDI (292M) 3G-SDI (424M) JESD204A/B 3125 x4 8b10b 614.4 1228.8 2457.6 3072.0 4915.2 x1 8b10b 270 x1 NRZI/Scrambled x1 NRZI/Scrambled x1 NRZI/Scrambled -- -- x1 8b/10b 1483.5 1485 2967 2970 5000 3125 Notes: 1. For slower rates, the SERDES are bypassed and CML signals are directly connected to the FPGA routing. 2. For ECP5-5G family devices only. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 42 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 2.14. Available SERDES Duals per LFE5UM/LFE5UM5G Devices Package LFE5UM/LFE5UM5G-25 LFE5UM/LFE5UM5G-45 LFE5UM/LFE5UM5G-85 285 csfBGA 1 1 1 381 caBGA 1 2 2 554 caBGA -- 2 2 756 caBGA -- -- 2 2.15.1. SERDES Block A SERDES receiver channel may receive the serial differential data stream, equalize the signal, perform Clock and Data Recovery (CDR) and de-serialize the data stream before passing the 8- or 10-bit data to the PCS logic. The SERDES transmitter channel may receive the parallel 8- or 10-bit data, serialize the data and transmit the serial bit stream through the differential drivers. Figure 2.28 shows a single-channel SERDES/PCS block. Each SERDES channel provides a recovered clock and a SERDES transmit clock to the PCS block and to the FPGA core logic. Each transmit channel, receiver channel, and SERDES PLL shares the same power supply (VCCA). The output and input buffers of each channel have their own independent power supplies (VCCHTX and VCCHRX). SERDES PCS FPGA Core Recovered Clock* RX_REFCLK HDINP Recovered Clock Equalizer HDINN Clock/Data Recovery Receiver TX REFCLK Deserializer 1:8/1:10 Polarity Adjust Bypass CTC FIFO Word Alignment 8b/10b Decoder Downsample FIFO Bypass Bypass Receive Clock TX PLL (Per Dual) SERDES Tx Clock De-emphasis Tx Driver HDOUTP Serializer 8:1/10:1 HDOUTN Receive Data Polarity Adjust 8b/10b Encoder Upsample FIFO Bypass Bypass Transmit Data Transmit Clock * 1/8 or 1/10 line rate Figure 2.28. Simplified Channel Block Diagram for SERDES/PCS Block 2.15.2. PCS As shown in Figure 2.28, the PCS receives the parallel digital data from the deserializer and selects the polarity, performs word alignment, decodes (8b/10b), provides Clock Tolerance Compensation and transfers the clock domain from the recovered clock to the FPGA clock via the Down Sample FIFO. For the transmit channel, the PCS block receives the parallel data from the FPGA core, encodes it with 8b/10b, selects the polarity and passes the 8/10 bit data to the transmit SERDES channel. The PCS also provides bypass modes that allow a direct 8-bit or 10-bit interface from the SERDES to the FPGA logic. The PCS interface to the FPGA can also be programmed to run at 1/2 speed for a 16-bit or 20-bit interface to the FPGA logic. Some of the enhancements in LFE5UM/LFE5UM5G SERDES/PCS include: Higher clock/channel granularity: Dual channel architecture provides more clock resource per channel. Enhanced Tx de-emphasis: Programmable pre- and post-cursors improves Tx output signaling Bit-slip function in PCS: Improves logic needed to perform Word Alignment function Refer to TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide for more information. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 43 ECP5TM and ECP5-5GTM Family Data Sheet 2.15.3. SERDES Client Interface Bus The SERDES Client Interface (SCI) is an IP interface that allows the user to change the configuration thru this interface. This is useful when the user needs to fine-tune some settings, such as input and output buffer that need to be optimized based on the channel characteristics. It is a simple register configuration interface that allows SERDES/PCS configuration without power cycling the device. The Diamond design tools support all modes of the PCS. Most modes are dedicated to applications associated with a specific industry standard data protocol. Other more general purpose modes allow users to define their own operation. With these tools, the user can define the mode for each dual in a design. Popular standards such as 10 Gb Ethernet, x4 PCI Express and 4x Serial RapidIO can be implemented using IP (available through Lattice), with two duals (Four SERDES channels and PCS) and some additional logic from the core. The LFE5UM/LFE5UM5G devices support a wide range of protocols. Within the same dual, the LFE5UM/ LFE5UM5G devices support mixed protocols with semi-independent clocking as long as the required clock frequencies are integer x1, x2, or x11 multiples of each other. Table 2.15 lists the allowable combination of primary and secondary protocol combinations. 2.16. Flexible Dual SERDES Architecture The LFE5UM/LFE5UM5G SERDES architecture is a dual channel-based architecture. For most SERDES settings and standards, the whole dual (consisting of two SERDES channels) is treated as a unit. This helps in silicon area savings, better utilization, higher granularity on clock/SERDES channel and overall lower cost. However, for some specific standards, the LFE5UM/LFE5UM5G dual-channel architecture provides flexibility; more than one standard can be supported within the same dual. Table 2.15 lists the standards that can be mixed and matched within the same dual. In general, the SERDES standards whose nominal data rates are either the same or a defined subset of each other, can be supported within the same dual. The two Protocol columns of the table define the different combinations of protocols that can be implemented together within a Dual. Table 2.15. LFE5UM/LFE5UM5G Mixed Protocol Support Protocol Protocol PCI Express 1.1 with SGMII PCI Express 1.1 with Gigabit Ethernet CPRI-3 with CPRI-2 and CPRI-1 3G-SDI with HD-SDI and SD-SDI There are some restrictions to be aware of when using spread spectrum clocking. When a dual shares a PCI Express x1 channel with a non-PCI Express channel, ensure that the reference clock for the dual is compatible with all protocols within the dual. For example, a PCI Express spread spectrum reference clock is not compatible with most Gigabit Ethernet applications because of tight CTC ppm requirements. While the LFE5UM/LFE5UM5G architecture will allow the mixing of a PCI Express channel and a Gigabit Ethernet, or SGMII channel within the same dual, using a PCI Express spread spectrum clocking as the transmit reference clock will cause a violation of the Gigabit Ethernet, and SGMII transmit jitter specifications. For further information on SERDES, refer to TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide. 2.17. IEEE 1149.1-Compliant Boundary Scan Testability All ECP5/ECP5-5G devices have boundary scan cells that are accessed through an IEEE 1149.1 compliant Test Access Port (TAP). This allows functional testing of the circuit board on which the device is mounted through a serial scan path that can access all critical logic nodes. Internal registers are linked internally, allowing test data to be shifted in and loaded directly onto test nodes, or test data to be captured and shifted out for verification. The test access port consists of dedicated I/Os: TDI, TDO, TCK and TMS. The test access port uses VCCIO8 for power supply. For more information, refer to TN1260, ECP5 and ECP5-5G sysCONFIG Usage Guide. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 44 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 2.18. Device Configuration All ECP5/ECP5-5G devices contain two ports that can be used for device configuration. The Test Access Port (TAP), which supports bit-wide configuration, and the sysCONFIG port, support dual-byte, byte and serial configuration. The TAP supports both the IEEE Standard 1149.1 Boundary Scan specification and the IEEE Standard 1532 In-System Configuration specification. There are 11 dedicated pins for TAP and sysConfig supports (TDI, TDO, TCK, TMS, CFG[2:0], PROGRAMN, DONE, INITN and CCLK). The remaining sysCONFIG pins are used as dual function pins. Refer to TN1260, ECP5 and ECP5-5G sysCONFIG Usage Guide for more information about using the dual-use pins as general purpose I/Os. There are various ways to configure an ECP5/ECP5-5G device: JTAG Standard Serial Peripheral Interface (SPI) - Interface to boot PROM Support x1, x2, x4 wide SPI memory interfaces. System microprocessor to drive a x8 CPU port SPCM mode System microprocessor to drive a serial slave SPI port (SSPI mode) Slave Serial model (SCM) On power-up, the FPGA SRAM is ready to be configured using the selected sysCONFIG port. Once a configuration port is selected, it will remain active throughout that configuration cycle. The IEEE 1149.1 port can be activated any time after power-up by sending the appropriate command through the TAP port. ECP5/ECP5-5G devices also support the Slave SPI Interface. In this mode, the FPGA behaves like a SPI Flash device (slave mode) with the SPI port of the FPGA to perform read-write operations. 2.18.1. Enhanced Configuration Options ECP5/ECP5-5G devices have enhanced configuration features such as: decryption support, decompression support, TransFRTM I/O and dual-boot and multi-boot image support. TransFR (Transparent Field Reconfiguration) TransFR I/O (TFR) is a unique Lattice technology that allows users to update their logic in the field without interrupting system operation using a single ispVM command. TransFR I/O allows I/O states to be frozen during device configuration. This allows the device to be field updated with a minimum of system disruption and downtime. Refer to TN1087, Minimizing System Interruption During Configuration Using TransFR Technology for details. Dual-Boot and Multi-Boot Image Support Dual-boot and multi-boot images are supported for applications requiring reliable remote updates of configuration data for the system FPGA. After the system is running with a basic configuration, a new boot image can be downloaded remotely and stored in a separate location in the configuration storage device. Any time after the update the ECP5/ECP5-5G devices can be re-booted from this new configuration file. If there is a problem, such as corrupt data during download or incorrect version number with this new boot image, the ECP5/ECP5-5G device can revert back to the original backup golden configuration and try again. This all can be done without power cycling the system. For more information, refer to TN1260, ECP5 and ECP5-5G sysCONFIG Usage Guide. 2.18.2. Single Event Upset (SEU) Support ECP5/ECP5-5G devices support SEU mitigation with three supporting functions: SED - Soft Error Detect SEC - Soft Error Correction SEI - Soft Error Injection ECP5/ECP5-5G devices have dedicated logic to perform Cycle Redundancy Code (CRC) checks. During configuration, the configuration data bitstream can be checked with the CRC logic block. In addition, the ECP5/ECP5-5G device can also be programmed to utilize a Soft Error Detect (SED) mode that checks for soft errors in configuration SRAM. The SED operation can be run in the background during user mode. If a soft error occurs, during user mode (normal operation) the device can be programmed to generate an error signal. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 45 ECP5TM and ECP5-5GTM Family Data Sheet When an error is detected, and the user's error handling software determines the error did not create any risk to the system operation, the SEC tool allows the device to be re-configured in the background to correct the affected bit. This operation allows the user functions to continue to operate without stopping the system function. Additional SEI tool is also available in the Diamond Software, by creating a frame of data to be programmed into the device in the background with one bit changed, without stopping the user functions on the device. This emulates an SEU situation, allowing the user to test and monitor its error handling software. For further information on SED support, refer to TN1184, LatticeECP3, ECP5 and ECP5-5G Soft Error Detection (SED)/Correction (SEC) Usage Guide. 2.18.3. On-Chip Oscillator Every ECP5/ECP5-5G device has an internal CMOS oscillator which is used to derive a Master Clock (MCLK) for configuration. The oscillator and the MCLK run continuously and are available to user logic after configuration is completed. The software default value of the MCLK is nominally 2.4 MHz. Table 2.16 lists all the available MCLK frequencies. When a different Master Clock is selected during the design process, the following sequence takes place: 1. Device powers up with a nominal Master Clock frequency of 2.4 MHz. 2. During configuration, users select a different master clock frequency. 3. The Master Clock frequency changes to the selected frequency once the clock configuration bits are received. 4. If the user does not select a master clock frequency, then the configuration bitstream defaults to the MCLK frequency of 2.4 MHz. This internal oscillator is available to the user by routing it as an input clock to the clock tree. For further information on the use of this oscillator for configuration or user mode, refer to TN1260, ECP5 and ECP5-5G sysCONFIG Usage Guide and TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide. Table 2.16. Selectable Master Clock (MCLK) Frequencies during Configuration (Nominal) MCLK Frequency (MHz) 2.4 4.8 9.7 19.4 38.8 62 2.19. Density Shifting The ECP5/ECP5-5G family is designed to ensure that different density devices in the same family and in the same package have the same pinout. Furthermore, the architecture ensures a high success rate when performing design migration from lower density devices to higher density devices. In many cases, it is also possible to shift a lower utilization design targeted for a high-density device to a lower density device. However, the exact details of the final resource utilization will impact the likelihood of success in each case. An example is that some user I/Os may become No Connects in smaller devices in the same package. Refer to the ECP5/ECP5-5G Pin Migration Tables and Diamond software for specific restrictions and limitations. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 46 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3. DC and Switching Characteristics 3.1. Absolute Maximum Ratings Table 3.1. Absolute Maximum Ratings Symbol VCC Parameter Supply Voltage Min -0.5 Max 1.32 Unit V VCCA VCCAUX, VCCAUXA VCCIO Supply Voltage Supply Voltage Supply Voltage -0.5 -0.5 -0.5 1.32 2.75 3.63 V V V -- VCCHRX, VCCHTX -- Input or I/O Transient Voltage Applied SERDES RX/TX Buffer Supply Voltages Voltage Applied on SERDES Pins -0.5 -0.5 -0.5 3.63 1.32 1.80 V V V TA TJ Storage Temperature (Ambient) Junction Temperature -65 -- 150 +125 C C Notes: 1. Stress above those listed under the "Absolute Maximum Ratings" may cause permanent damage to the device. Functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 2. Compliance with the Lattice Thermal Management document is required. 3. All voltages referenced to GND. 3.2. Recommended Operating Conditions Table 3.2. Recommended Operating Conditions Symbol Parameter ECP5 Min Max Unit 1.045 1.155 V VCC2 Core Supply Voltage ECP5-5G 1.14 1.26 V VCCAUX2, 4 Auxiliary Supply Voltage -- 2.375 2.625 V VCCIO I/O Driver Supply Voltage -- 1.14 3.465 V VREF1 Input Reference Voltage -- 0.5 1.0 V tJCOM Junction Temperature, Commercial Operation -- 0 85 C tJIND Junction Temperature, Industrial Operation -- -40 100 C SERDES External Power Supply5 VCCA SERDES Analog Power Supply ECP5 1.045 1.155 V ECP5-5G 1.164 1.236 V VCCAUXA SERDES Auxiliary Supply Voltage -- 2.374 2.625 V VCCHRX6 SERDES Input Buffer Power Supply ECP5UM 0.30 1.155 V ECP5-5G 0.30 1.26 V VCCHTX SERDES Output Buffer Power Supply ECP5UM 1.045 1.155 V ECP5-5G 1.14 1.26 V 2, 3 Notes: 1. For correct operation, all supplies except VREF must be held in their valid operation range. This is true independent of feature usage. 2. All supplies with same voltage, except SERDES Power Supplies, should be connected together. 3. See recommended voltages by I/O standard in Table 3.4 on page 48. 4. VCCAUX ramp rate must not exceed 30 mV/s during power-up when transitioning between 0 V and 3 V. 5. Refer to TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide for information on board considerations for SERDES power supplies. 6. VCCHRX is used for Rx termination. It can be biased to Vcm if external AC coupling is used. This voltage needs to meet all the HDin input voltage level requirements specified in the Rx section of this Data Sheet. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 47 ECP5TM and ECP5-5GTM Family Data Sheet 3.3. Power Supply Ramp Rates Table 3.3. Power Supply Ramp Rates Symbol Parameter Min Typ Max Unit tRAMP Power Supply ramp rates for all supplies 0.01 -- 10 V/ms Note: Assumes monotonic ramp rates. 3.4. Power-On-Reset Voltage Levels Table 3.4. Power-On-Reset Voltage Levels Symbol VPORUP VPORDN Parameter All Devices All Devices Min Typ Max Unit Power-On-Reset ramp-up trip point (Monitoring VCC, VCCAUX, and VCCIO8) VCC 0.90 -- 1.00 V VCCAUX 2.00 -- 2.20 V VCCIO8 0.95 -- 1.06 V Power-On-Reset rampdown trip point (Monitoring VCC, and VCCAUX VCC 0.77 -- 0.87 V VCCAUX 1.80 -- 2.00 V Notes: These POR trip points are only provided for guidance. Device operation is only characterized for power supply voltages specified under recommended operating conditions. Only VCCIO8 has a Power-On-Reset ramp up trip point. All other VCCIOs do not have Power-On-Reset ramp up detection. VCCIO8 does not have a Power-On-Reset ramp down detection. VCCIO8 must remain within the Recommended Operating Conditions to ensure proper operation. 3.5. Power up Sequence Power-On-Reset (POR) puts the ECP5/ECP5-5G device in a reset state. POR is released when VCC, VCCAUX, and VCCIO8 are ramped above the VPORUP voltage, as specified above. VCCIO8 controls the voltage on the configuration I/O pins. If the ECP5/ECP5-5G device is using Master SPI mode to download configuration data from external SPI Flash, it is required to ramp VCCIO8 above VIH of the external SPI Flash, before at least one of the other two supplies (VCC and/or VCCAUX) is ramped to VPORUP voltage level. If the system cannot meet this power up sequence requirement, and requires the VCCIO8 to be ramped last, then the system must keep either PROGRAMN or INITN pin LOW during power up, until VCCIO8 reaches VIH of the external SPI Flash. This ensures the signals driven out on the configuration pins to the external SPI Flash meet the VIH voltage requirement of the SPI Flash. For LFE5UM/LFE5UM5G devices, it is required to power up VCCA, before VCCAUXA is powered up. 3.6. Hot Socketing Specifications Table 3.5. Hot Socketing Specifications Symbol Parameter Condition Min Typ Max Unit IDK_HS Input or I/O Leakage Current for Top and Bottom Banks Only 0 VIN VIH (Max) -- -- 1 mA IDK Input or I/O Leakage Current for Left and Right Banks Only 0 VIN < VCCIO -- -- 1 mA VCCIO VIN VCCIO + 0.5 V -- 18 -- mA Notes: 1. VCC, VCCAUX and VCCIO should rise/fall monotonically. 2. IDK is additive to IPU, IPW or IBH. 3. LVCMOS and LVTTL only. 4. Hot socket specification defines when the hot socketed device's junction temperature is at 85 oC or below. When the hot socketed device's junction temperature is above 85 oC, the IDK current can exceed 1 mA. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 48 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.7. Hot Socketing Requirements Table 3.6. Hot Socketing Requirements Description Input current per SERDES I/O pin when device is powered down and inputs driven. Input current per HDIN pin when device power supply is off, inputs driven1, 2 Current per HDIN pin when device power ramps up, input driven3 Current per HDOUT pin when device power supply is off, outputs pulled up4 Min Typ Max Unit -- -- 8 mA -- -- 15 mA -- -- 50 mA -- -- 30 mA Notes: 1. Device is powered down with all supplies grounded, both HDINP and HDINN inputs driven by a CML driver with maximum allowed output VCCHTX, 8b/10b data, no external AC coupling. 2. Each P and N input must have less than the specified maximum input current during hot plug. For a device with 2 DCU, the total input current would be 15 mA * 4 channels * 2 input pins per channel = 120 mA. 3. Device power supplies are ramping up (VCCA and VCCAUX), both HDINP and HDINN inputs are driven by a CML driver with maximum allowed output VCCHTX, 8b/10b data, internal AC coupling. 4. Device is powered down with all supplies grounded. Both HDOUTP and HDOUN outputs are pulled up to V CCHTX by the far end receiver termination of 50 single ended. 3.8. ESD Performance Refer to the ECP5 and ECP5-5G Product Family Qualification Summary for complete qualification data, including ESD performance. 3.9. DC Electrical Characteristics Over Recommended Operating Conditions Table 3.7. DC Electrical Characteristics Symbol Parameter Condition IIL, IIH1, 4 Min Typ Max Unit Input or I/O Low Leakage IIH1, 3 Input or I/O High Leakage 0 VIN VCCIO -- VCCIO < VIN VIH(MAX) -- -- 10 A -- 100 A IPU I/O Active Pull-up Current 0 VIN 0.7 VCCIO -30 -- -150 A IPD I/O Active Pull-down Current VIL (MAX) VIN VCCIO 30 -- 150 A I/O Capacitance2 VCCIO = 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V, VCC = 1.2 V, VIO = 0 to VIH(MAX) C1 -- 5 8 pf C2 Dedicated Input Capacitance2 VCCIO = 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V, VCC = 1.2 V, VIO = 0 to VIH(MAX) -- 5 7 pf VHYST Hysteresis for Single-Ended Inputs VCCIO = 3.3 V -- 300 -- mV VCCIO = 2.5 V -- 250 -- mV Notes: 1. Input or I/O leakage current is measured with the pin configured as an input or as an I/O with the output driver tristated. It is not measured with the output driver active. Bus maintenance circuits are disabled. 2. TA 25 oC, f = 1.0 MHz. 3. Applicable to general purpose I/Os in top and bottom banks. 4. When used as VREF, maximum leakage= 25 A. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 49 ECP5TM and ECP5-5GTM Family Data Sheet 3.10. Supply Current (Standby) Over recommended operating conditions. Table 3.8. ECP5/ECP5-5G Supply Current (Standby) Symbol ICC ICCAUX ICCIO ICCA Parameter Core Power Supply Current Auxiliary Power Supply Current Bank Power Supply Current (Per Bank) SERDES Power Supply Current (Per Dual) Device Typical Unit LFE5U-12F/ LFE5U-25F/ LFE5UM-25F 77 mA LFE5UM5G-25F TBD mA LFE5U-45F/ LFE5UM-45F 116 mA LFE5UM5G-45F TBD mA LFE5U-85F/ LFE5UM-85F 212 mA LFE5UM5G-85F TBD mA LFE5U-12F/ LFE5U-25F/ LFE5UM-25F/ LFE5UM5G-25F LFE5U-45F/ LFE5UM-45F/ LFE5UM5G-45F 16 mA 17 mA LFE5U-85F/ LFE5UM-85F/ LFE5UM5G-85F 26 mA LFE5U-12F/ LFE5U-25F/ LFE5UM-25F/ LFE5UM5G-25F LFE5U-45F/ LFE5UM-45F/ LFE5UM5G-45F 0.5 mA 0.5 mA LFE5U-85F/ LFE5UM-85F/ LFE5UM5G-85F 0.5 mA LFE5UM-25F 11 mA LFE5UM5G-25F 12 mA LFE5UM-45F 9.5 mA LFE5UM5G-45F 11 mA LFE5UM-85F 9.5 mA LFE5UM5G-85F 11 mA Notes: For further information on supply current, see the list of technical documentation in Supplemental Information section on page 104. Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND. Frequency 0 Hz. Pattern represents a "blank" configuration data file. TJ = 85 C, power supplies at nominal voltage. To determine the ECP5/ECP5-5G peak start-up current, use the Power Calculator tool in the Lattice Diamond Design Software. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 50 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.11. SERDES Power Supply Requirements1,2,3 Over recommended operating conditions. Table 3.9. ECP5UM Symbol Description Typ Max Unit Standby (Power Down) ICCA-SB VCCA Power Supply Current (Per Channel) 4 9.5 mA ICCHRX-SB4 VCCHRX, Input Buffer Current (Per Channel) -- 0.1 mA ICCHTX-SB VCCHTX, Output Buffer Current (Per Channel) -- 0.9 mA Operating (Data Rate = 3.125 Gb/s) ICCA-OP VCCA Power Supply Current (Per Channel) 43 54 mA ICCHRX-OP5 VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA ICCHTX-OP VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 40 50 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 34 43 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 28 38 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA 8 10 mA Operating (Data Rate = 2.5 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 1.25 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 270 Mb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP VCCHTX, Output Buffer Current (Per Channel) Notes: 1. Rx Equalization enabled, Tx De-emphasis (pre-cursor and post-cursor) disabled 2. Per Channel current is calculated with both channels on in a Dual, and divide current by two. If only one channel is on, current will be higher. 3. To calculate with Tx De-emphasis enabled, use the Diamond Power Calculator tool. 4. For ICCHRX-SB, during Standby, input termination on Rx are disabled. 5. For ICCHRX-OP, during operational, the max specified when external AC coupling is used. If externally DC coupled, the power is based on current pulled down by external driver when the input is driven to LOW. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 51 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.10. ECP5-5G Symbol Description Typ Max Unit Standby (Power Down) ICCA-SB VCCA Power Supply Current (Per Channel) 4 9.5 mA ICCHRX-SB4 VCCHRX, Input Buffer Current (Per Channel) -- 0.1 mA ICCHTX-SB VCCHTX, Output Buffer Current (Per Channel) -- 0.9 mA VCCA Power Supply Current (Per Channel) 58 67 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 48 57 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 44 53 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 36 46 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA VCCHTX, Output Buffer Current (Per Channel) 10 13 mA VCCA Power Supply Current (Per Channel) 30 40 mA VCCHRX, Input Buffer Current (Per Channel) 0.4 0.5 mA 8 10 mA Operating (Data Rate = 5 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 3.2 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 2.5 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 1.25 Gb/s) ICCA-OP ICCHRX-OP 5 ICCHTX-OP Operating (Data Rate = 270 Mb/s) ICCA-OP ICCHRX-OP ICCHTX-OP 5 VCCHTX, Output Buffer Current (Per Channel) Notes: 1. Rx Equalization enabled, Tx De-emphasis (pre-cursor and post-cursor) disabled 2. Per Channel current is calculated with both channels on in a Dual, and divide current by two. If only one channel is on, current will be higher. 3. To calculate with Tx De-emphasis enabled, use the Diamond Power Calculator tool. 4. For ICCHRX-SB, during Standby, input termination on Rx are disabled. 5. For ICCHRX-OP, during operational, the max specified when external AC coupling is used. If externally DC coupled, the power is based on current pulled down by external driver when the input is driven to LOW. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 52 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.12. sysI/O Recommended Operating Conditions Table 3.11. sysI/O Recommended Operating Conditions VCCIO Standard VREF (V) Min Typ Max Min Typ Max 3.135 3.3 3.465 -- -- -- 3.135 3.3 3.465 -- -- -- 2.375 2.5 2.625 -- -- -- LVCMOS18 1.71 1.8 1.89 -- -- -- LVCMOS15 1.425 1.5 1.575 -- -- -- LVCMOS121 1.14 1.2 1.26 -- -- -- LVTTL331 3.135 3.3 3.465 -- -- -- _II2 1.43 1.5 1.57 0.68 0.75 0.9 SSTL18_I, _II2 1.71 1.8 1.89 0.833 0.9 0.969 SSTL135_I, _II2 1.28 1.35 1.42 0.6 0.675 0.75 HSUL122 1.14 1.2 1.26 0.588 0.6 0.612 MIPI D-PHY LP Input3 1.425 1.5 1.575 -- -- -- LVDS251, 3 Output 2.375 2.5 2.625 -- -- -- LVCMOS331 LVCMOS33D3 Output LVCMOS251 SSTL15_I, subLVS3 (Input -- -- -- -- -- -- SLVS3 (Input only) -- -- -- -- -- -- LVDS25E3 Output 2.375 2.5 2.625 -- -- -- MLVDS3 Output 2.375 2.5 2.625 -- -- -- LVPECL331, 3 Output 3.135 3.3 3.465 -- -- -- BLVDS251, 3 Output 2.375 2.5 2.625 -- -- -- HSULD12D2, 3 1.14 1.2 1.26 -- -- -- SSTL135D_I, II2, 3 1.28 1.35 1.42 -- -- -- II2, 3 1.43 1.5 1.57 -- -- -- 1.71 1.8 1.89 -- -- -- SSTL15D_I, only) SSTL18D_I1, 2, 3, II1, 2, 3 Notes: 1. For input voltage compatibility, refer to TN1262, ECP5 and ECP5-5G sysIO Usage Guide. 2. VREF is required when using Differential SSTL and HSUL to interface to DDR/LPDDR memories. 3. These differential inputs use LVDS input comparator, which uses VCCAUX power 4. All differential inputs and LVDS25 output are supported in the Left and Right banks only. Refer to TN1262, ECP5 and ECP5-5G sysIO Usage Guide for details. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 53 ECP5TM and ECP5-5GTM Family Data Sheet 3.13. sysI/O Single-Ended DC Electrical Characteristics Input/Output Standard VIL VIH Min (V) Max (V) Min (V) Max (V) VOL Max (V) VOH Min (V) IOL1 (mA) LVCMOS33 -0.3 0.8 2.0 3.465 0.4 VCCIO - 0.4 16, 12, 8, 4 LVCMOS25 -0.3 0.7 1.7 3.465 0.4 VCCIO - 0.4 12, 8, 4 -16, -12, -8, -4 -12, -8, -4 LVCMOS18 -0.3 0.35 VCCIO 0.65 VCCIO 3.465 0.4 VCCIO - 0.4 12, 8, 4 -12, -8, -4 LVCMOS15 -0.3 0.35 VCCIO 0.65 VCCIO 3.465 0.4 VCCIO - 0.4 8, 4 -8, -4 LVCMOS12 -0.3 0.35 VCCIO 0.65 VCCIO 3.465 0.4 VCCIO - 0.4 8, 4 -8, -4 LVTTL33 SSTL18_I (DDR2 Memory) SSTL18_II -0.3 -0.3 -0.3 0.8 VREF - 0.125 VREF - 0.125 VREF - 0.1 IOH1 (mA) 2.0 3.465 0.4 VCCIO - 0.4 16, 12, 8, 4 -16, -12, -8, -4 VREF + 0.125 3.465 0.4 VCCIO - 0.4 6.7 -6.7 VREF + 0.125 3.465 0.28 VCCIO - 0.28 13.4 -13.4 SSTL15 _I VREF + 0.1 VCCIO - 0.31 -0.3 3.465 0.31 7.5 -7.5 (DDR3 Memory) SSTL15_II VREF - 0.1 VREF + 0.1 VCCIO - 0.31 -0.3 3.465 0.31 8.8 -8.8 (DDR3 Memory) SSTL135_I VREF - 0.09 VREF + 0.09 VCCIO - 0.27 -0.3 3.465 0.27 7 -7 (DDR3L Memory) SSTL135_II VREF - 0.09 VREF + 0.09 VCCIO - 0.27 -0.3 3.465 0.27 8 -8 (DDR3L Memory) MIPI D-PHY (LP) -0.3 0.55 0.88 3.465 -- -- -- -- HSUL12 VREF - 0.1 VREF + 0.1 VCCIO - 0.3 (LPDDR2/3 -0.3 3.465 0.3 4 -4 Memory) Notes: 1. For electromigration, the average DC current drawn by the I/O pads within a bank of I/Os shall not exceed 10 mA per I/O (All I/Os used in the same VCCIO). 2. Not all IO types are supported in all banks. Refer to TN1262, ECP5 and ECP5-5G sysIO Usage Guide for details. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 54 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.14. sysI/O Differential Electrical Characteristics 3.14.1. LVDS Over recommended operating conditions. Table 3.12. LVDS Parameter Description Test Conditions VINP, VINM Input Voltage -- Min Typ Max Unit 0 -- 2.4 V VCM Input Common Mode Voltage VTHD Differential Input Threshold Half the sum of the two Inputs 0.05 -- 2.35 V Difference between the two Inputs 100 -- -- mV IIN Input Current Power On or Power Off -- VOH Output High Voltage for VOP or VOM RT = 100 -- -- 10 A 1.38 1.60 V VOL Output Low Voltage for VOP or VOM RT = 100 0.9 V 1.03 -- V VOD Output Voltage Differential (VOP - VOM), RT = 100 250 350 450 mV VOD -- -- 50 mV VOS Change in VOD Between High and Low Output Voltage Offset 1.125 1.20 1.375 V VOS Change in VOS Between H and L -- -- 50 mV -- 12 mA -- (VOP + VOM)/2, RT = 100 -- VOD = 0 V Driver outputs shorted to -- each other Note: On the left and right sides of the device, this specification is valid only for VCCIO = 2.5 V or 3.3 V. ISAB Output Short Circuit Current 3.14.2. SSTLD All differential SSTL outputs are implemented as a pair of complementary single-ended outputs. All allowable single-ended output classes (class I and class II) are supported in this mode. 3.14.3. LVCMOS33D All I/O banks support emulated differential I/O using the LVCMOS33D I/O type. This option, along with the external resistor network, provides the system designer the flexibility to place differential outputs on an I/O bank with 3.3 V VCCIO. The default drive current for LVCMOS33D output is 12 mA with the option to change the device strength to 4 mA, 8 mA, 12 mA or 16 mA. Follow the LVCMOS33 specifications for the DC characteristics of the LVCMOS33D. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 55 ECP5TM and ECP5-5GTM Family Data Sheet 3.14.4. LVDS25E The top and bottom sides of ECP5/ECP5-5G devices support LVDS outputs via emulated complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The scheme shown in Figure 3.1 is one possible solution for point-to-point signals. + - Figure 3.1. LVDS25E Output Termination Example Table 3.13. LVDS25E DC Conditions Parameter Description Typical Unit VCCIO Output Driver Supply (5%) 2.50 V ZOUT Driver Impedance 20 RS Driver Series Resistor (1%) 158 RP Driver Parallel Resistor (1%) 140 RT Receiver Termination (1%) 100 VOH Output High Voltage 1.43 V VOL Output Low Voltage 1.07 V VOD Output Differential Voltage 0.35 V VCM Output Common Mode Voltage 1.25 V ZBACK Back Impedance 100.5 IDC DC Output Current 6.03 mA (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 56 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.14.5. BLVDS25 The ECP5/ECP5-5G devices support the BLVDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel external resistor across the driver outputs. BLVDS is intended for use when multi-drop and bi-directional multi-point differential signaling is required. The scheme shown in Figure 3.2 is one possible solution for bi-directional multi-point differential signals. Heavily loaded backplane, effective Zo ~ 45 to 90 differential 2.5 V R S = 90 2.5 V R S = 90 16 mA 16 mA 45 - 90 R TL 2.5 V R TR 45 - 90 2.5 V 16 mA 16 mA . R. =.90 R S = 90 S 2.5 V + + - 2.5 V 16 mA 16 mA - R S = 90 R S = 90 2.5 V + - + R S = 90 R S = 90 2.5 V 16 mA - 16 mA Figure 3.2. BLVDS25 Multi-point Output Example Over recommended operating conditions. Table 3.14. BLVDS25 DC Conditions Typical Parameter Description VCCIO Output Driver Supply (5%) 2.50 2.50 V ZOUT Driver Impedance 10.00 10.00 RS Driver Series Resistor (1%) 90.00 90.00 RTL Driver Parallel Resistor (1%) 45.00 90.00 RTR Receiver Termination (1%) 45.00 90.00 VOH Output High Voltage 1.38 1.48 V VOL Output Low Voltage 1.12 1.02 V VOD Output Differential Voltage 0.25 0.46 V VCM Output Common Mode Voltage 1.25 1.25 V IDC DC Output Current 11.24 10.20 mA Zo = 45 Zo = 90 Unit Note: For input buffer, see LVDS Table 3.12 on page 55. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 57 ECP5TM and ECP5-5GTM Family Data Sheet 3.14.6. LVPECL33 The ECP5/ECP5-5G devices support the differential LVPECL standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The LVPECL input standard is supported by the LVDS differential input buffer. The scheme shown in Figure 3.3 is one possible solution for point-to-point signals. VCCIO = 3.3 V (5%) RS = 93.1 (1%) 16 mA VCCIO = 3.3 V (5%) RP = 196 (1%) RS = 93.1 (1%) 16 mA + RT = 100 (1%) - Transmission line, Zo = 100 differential On-chip Off-chip Off-chip On-chip Figure 3.3. Differential LVPECL33 Over recommended operating conditions. Table 3.15. LVPECL33 DC Conditions Parameter Description VCCIO Output Driver Supply (5%) ZOUT Driver Impedance RS RP RT VOH Typical Unit 3.30 V 10 Driver Series Resistor (1%) 93 Driver Parallel Resistor (1%) 196 Receiver Termination (1%) 100 Output High Voltage 2.05 V VOL Output Low Voltage 1.25 V VOD Output Differential Voltage 0.80 V VCM Output Common Mode Voltage 1.65 V ZBACK Back Impedance 100.5 IDC DC Output Current 12.11 mA Note: For input buffer, see LVDS Table 3.12 on page 55. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 58 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.14.7. MLVDS25 The ECP5/ECP5-5G devices support the differential MLVDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The MLVDS input standard is supported by the LVDS differential input buffer. The scheme shown in Figure 3.4 is one possible solution for MLVDS standard implementation. Resistor values in the figure are industry standard values for 1% resistors. Heavily loaded backplace, effective Zo~50 to 70 differential 2.5 V 2.5 V R S = 35 R S = 35 16 mA 16 mA OE R TL 50 to 70 1% 50 to 70 1% OE R TR 2.5 V 2.5 V 16 mA 16 mA OE R S = 35 R S = 35 R S = 35 R S = 35 R S = 35 OE R S = 35 + -- OE 16 mA 2.5 V OE OE 2.5 V - 2.5 V + OE 16 mA + 2.5 V - + - 1 6 mA 16 mA Figure 3.4. MLVDS25 (Multipoint Low Voltage Differential Signaling) Table 3.16. MLVDS25 DC Conditions Parameter Description VCCIO Output Driver Supply (5%) ZOUT RS Typical Unit Zo=50 2.50 Zo=70 2.50 Driver Impedance 10.00 10.00 Driver Series Resistor (1%) 35.00 35.00 RTL Driver Parallel Resistor (1%) 50.00 70.00 RTR Receiver Termination (1%) 50.00 70.00 VOH Output High Voltage 1.52 1.60 V VOL Output Low Voltage 0.98 0.90 V VOD Output Differential Voltage 0.54 0.70 V VCM Output Common Mode Voltage 1.25 1.25 V IDC DC Output Current 21.74 20.00 mA V Note: For input buffer, see LVDS Table 3.12 on page 55. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 59 ECP5TM and ECP5-5GTM Family Data Sheet 3.14.8. SLVS Scalable Low-Voltage Signaling (SLVS) is based on a point-to-point signaling method defined in the JEDEC JESD8-13 (SLVS-400) standard. This standard evolved from the traditional LVDS standard and relies on the advantage of its use of smaller voltage swings and a lower common-mode voltage. The 200 mV (400 mV p-p) SLVS swing contributes to a reduction in power. The ECP5/ECP5-5G devices can receive differential input up to 800 Mb/s with its LVDS input buffer. This LVDS input buffer is used to meet the SLVS input standard specified by the JEDEC standard. The SLVS output parameters are compared to ECP5/ECP5-5G LVDS input parameters, as listed in Table 3.17. Table 3.17. Input to SLVS Parameter ECP5/ECP5-5G LVDS Input SLVS Output Unit Vcm (min) 50 150 mV Vcm (max) 2350 250 mV Differential Voltage (min) 100 140 mV Differential Voltage (max) -- 270 mV ECP5/ECP5-5G does not support SLVS output. However, SLVS output can be created using ECP5/ECP5-5G LVDS outputs by level shift to meet the low Vcm/Vod levels required by SLVS. Figure 3.5 shows how the LVDS output can be shifted external to meet SLVS levels. 2.5 V Typical R3=15 R1=220 R2=47 LVDS + - SLVDS 100 Diff + Z0=50 - R2=47 R1=220 ECP5/ECP5-5G 2.5 V Typical On Chip R3=15 On Chip SLVDS Peer LVDS + -- Z0=50 + -- Figure 3.5. SLVS Interface (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 60 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.15. Typical Building Block Function Performance Table 3.18. Pin-to-Pin Performance Function -8 Timing Unit 16-Bit Decoder 5.06 ns 32-Bit Decoder 6.08 ns 64-Bit Decoder 5.06 ns 4:1 Mux 4.45 ns 8:1 Mux 4.63 ns 16:1 Mux 4.81 ns 32:1 Mux 4.85 ns Basic Functions Notes: 1. I/Os are configured with LVCMOS25 with VCCIO=2.5, 12 mA drive. 2. These functions were generated using Lattice Diamond design software tool. Exact performance may vary with the device and the design software tool version. The design software tool uses internal parameters that have been characterized but are not tested on every device. 3. Commercial timing numbers are shown. Industrial numbers are typically slower and can be extracted from Lattice Diamond design software tool. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 61 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.19. Register-to-Register Performance Function -8 Timing Unit 16-Bit Decoder 441 MHz 32-Bit Decoder 441 MHz 64-Bit Decoder 332 MHz 4:1 Mux 441 MHz 8:1 Mux 441 MHz 16:1 Mux 441 MHz 32:1 Mux 441 MHz 8-Bit Adder 441 MHz 16-Bit Adder 441 MHz 64-Bit Adder 441 MHz 16-Bit Counter 384 MHz 32-Bit Counter 317 MHz 64-Bit Counter 263 MHz 64-Bit Accumulator 288 MHz 1024x18 True-Dual Port RAM (Write Through or Normal), with EBR Output Registers 272 MHz 1024x18 True-Dual Port RAM (Read-Before-Write), with EBR Output Registers 214 MHz 16 x 2 Pseudo-Dual Port or 16 x 4 Single Port RAM (One PFU) 441 MHz 16 x 4 Pseudo-Dual Port (Two PFUs) 441 MHz 9 x 9 Multiplier (All Registers) 225 MHz 18 x 18 Multiplier (All Registers) 225 MHz 36 x 36 Multiplier (All Registers) 225 MHz 18 x 18 Multiply-Add/Sub (All Registers) 225 MHz 18 x 18 Multiply/Accumulate (Input and Output Registers) 225 MHz Basic Functions Embedded Memory Functions Distributed Memory Functions DSP Functions Notes: 1. These functions were generated using Lattice Diamond design software tool. Exact performance may vary with the device and the design software tool version. The design software tool uses internal parameters that have been characterized but are not tested on every device. 2. Commercial timing numbers are shown. Industrial numbers are typically slower and can be extracted from Lattice Diamond design software tool. 3.16. Derating Timing Tables Logic timing provided in the following sections of this data sheet and the Diamond design tools are worst case numbers in the operating range. Actual delays at nominal temperature and voltage for best case process, can be much better than the values given in the tables. The Diamond design tool can provide logic timing numbers at a particular temperature and voltage. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 62 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.17. Maximum I/O Buffer Speed Over recommended operating conditions. Table 3.20. ECP5/ECP5-5G Maximum I/O Buffer Speed Buffer Description Max Unit LVDS25 LVDS, VCCIO = 2.5 V 400 MHz MLVDS25 MLVDS, Emulated, VCCIO = 2.5 V 400 MHz BLVDS25 BLVDS, Emulated, VCCIO = 2.5 V 400 MHz MIPI D-PHY (HS Mode) MIPI Video 400 MHz SLVS SLVS similar to MIPI 400 MHz Mini LVDS Mini LVDS 400 MHz LVPECL33 LVPECL, Emulated, VCCIO = 3.3 V 400 MHz SSTL18 (all supported classes) SSTL_18 class I, II, VCCIO = 1.8 V 400 MHz SSTL15 (all supported classes) SSTL_15 class I, II, VCCIO = 1.5 V 400 MHz SSTL135 (all supported classes) SSTL_135 class I, II, VCCIO = 1.35 V 400 MHz HSUL12 (all supported classes) HSUL_12 class I, II, VCCIO = 1.2 V 400 MHz LVTTL33 LVTTL, VCCIO = 3.3 V 200 MHz LVCMOS33 LVCMOS, VCCIO = 3.3 V 200 MHz LVCMOS25 LVCMOS, VCCIO = 2.5 V 200 MHz LVCMOS18 LVCMOS, VCCIO = 1.8 V 200 MHz LVCMOS15 LVCMOS 1.5, VCCIO = 1.5 V 200 MHz LVCMOS12 LVCMOS 1.2, VCCIO = 1.2 V 200 MHz LVDS25E LVDS, Emulated, VCCIO = 2.5 V 300 MHz LVDS25 LVDS, VCCIO = 2.5 V 400 MHz MLVDS25 MLVDS, Emulated, VCCIO = 2.5 V 300 MHz BLVDS25 BLVDS, Emulated, VCCIO = 2.5 V 300 MHz LVPECL33 LVPECL, Emulated, VCCIO = 3.3 V 300 MHz SSTL18 (all supported classes) SSTL_18 class I, II, VCCIO = 1.8 V 400 MHz SSTL15 (all supported classes) SSTL_15 class I, II, VCCIO = 1.5 V 400 MHz SSTL135 (all supported classes) SSTL_135 class I, II, VCCIO = 1.35 V 400 MHz HSUL12 (all supported classes) HSUL12 class I, II, VCCIO = 1.2 V 400 MHz LVTTL33 LVTTL, VCCIO = 3.3 V 150 MHz LVCMOS33 (For all drives) LVCMOS, 3.3 V 150 MHz LVCMOS25 (For all drives) LVCMOS, 2.5 V 150 MHz LVCMOS18 (For all drives) LVCMOS, 1.8 V 150 MHz LVCMOS15 (For all drives) LVCMOS, 1.5 V 150 MHz LVCMOS12 (For all drives) LVCMOS, 1.2 V 150 MHz Maximum Input Frequency Maximum Output Frequency Notes: 1. These maximum speeds are characterized but not tested on every device. 2. Maximum I/O speed for differential output standards emulated with resistors depends on the layout. 3. LVCMOS timing is measured with the load specified in Switching Test Conditions, Table 3.43 on page 90. 4. All speeds are measured at fast slew. 5. Actual system operation may vary depending on user logic implementation. 6. Maximum data rate equals 2 times the clock rate when utilizing DDR. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 63 ECP5TM and ECP5-5GTM Family Data Sheet 3.18. External Switching Characteristics Over recommended commercial operating conditions. Table 3.21. ECP5/ECP5-5G External Switching Characteristics Parameter Clocks Primary Clock fMAX_PRI tW_PRI tSKEW_PRI Edge Clock fMAX_EDGE tW_EDGE tSKEW_EDGE Description Device -8 -7 -6 Min Max Min Max Min Max Unit Frequency for Primary Clock Tree Clock Pulse Width for Primary Clock Primary Clock Skew within a Device -- -- 370 -- 303 -- 257 MHz -- 0.8 -- 0.9 -- 1.0 -- ns -- -- 420 -- 462 -- 505 ps Frequency for Edge Clock Tree Clock Pulse Width for Edge Clock Edge Clock Skew within a Bank -- -- -- -- 1.175 -- 400 -- 160 -- 1.344 -- 350 -- 180 -- 1.50 -- 312 -- 200 MHz ns ps 5.4 -- 6.1 -- 6.8 ns -- 0 -- 0 -- ns -- 3 -- 3.3 -- ns -- 1.33 -- 1.46 -- ns -- 0 -- 0 -- ns 400 -- 350 -- 312 MHz 3.5 -- 3.8 -- 4.1 ns -- 0.78 -- 0.85 -- ns -- 0.89 -- 0.98 -- ns -- 1.78 -- 1.95 -- ns Generic SDR Input General I/O Pin Parameters Using Dedicated Primary Clock Input without PLL Clock to Output - PIO Output All tCO -- Register Devices Clock to Data Setup - PIO Input All tSU 0 Register Devices Clock to Data Hold - PIO Input All tH 2.7 Register Devices Clock to Data Setup - PIO Input All tSU_DEL 1.2 Register with Data Input Delay Devices Clock to Data Hold - PIO Input All tH_DEL 0 Register with Data Input Delay Devices Clock Frequency of I/O and PFU All fMAX_IO -- Register Devices General I/O Pin Parameters Using Dedicated Primary Clock Input with PLL Clock to Output - PIO Output All tCOPLL -- Register Devices Clock to Data Setup - PIO Input All tSUPLL 0.7 Register Devices Clock to Data Hold - PIO Input All tHPLL 0.8 Register Devices Clock to Data Setup - PIO Input All tSU_DELPLL 1.6 Register with Data Input Delay Devices (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 64 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.21. ECP5/ECP5-5G External Switching Characteristics (Continued) Parameter Description tH_DELPLL Clock to Data Hold - PIO Input Register with Data Input Delay Device All Devices -8 -7 -6 Min Max Min Max Min Max 0 -- 0 -- 0 -- Unit ns Generic DDR Input Generic DDRX1 Inputs With Clock and Data Centered at Pin (GDDRX1_RX.SCLK.Centered) Using PCLK Clock Input - Figure 3.6 tSU_GDDRX1_centered Data Setup Before CLK Input All Devices 0.52 -- 0.52 -- 0.52 -- ns tHD_GDDRX1_centered Data Hold After CLK Input All Devices 0.52 -- 0.52 -- 0.52 -- ns fDATA_GDDRX1_centered GDDRX1 Data Rate All Devices -- 500 -- 500 -- 500 Mb/s fMAX_GDDRX1_centered GDDRX1 CLK Frequency (SCLK) All Devices -- 250 -- 250 -- 250 MHz Generic DDRX1 Inputs With Clock and Data Aligned at Pin (GDDRX1_RX.SCLK.Aligned) Using PCLK Clock Input - Figure 3.7 - ns + tSU_GDDRX1_aligned Data Setup from CLK Input All Devices -- -- -0.55 -- -0.55 0.55 1/2 UI ns + tHD_GDDRX1_aligned Data Hold from CLK Input All Devices 0.55 -- 0.55 -- 0.55 -- 1/2 UI fDATA_GDDRX1_aligned GDDRX1 Data Rate All Devices -- 500 -- 500 -- 500 Mb/s fMAX_GDDRX1_aligned GDDRX1 CLK Frequency (SCLK) All Devices -- 250 -- 250 -- 250 MHz Generic DDRX2 Inputs With Clock and Data Centered at Pin (GDDRX2_RX.ECLK.Centered) Using PCLK Clock Input, Left and Right sides Only - Figure 3.6 tSU_GDDRX2_centered Data Setup before CLK Input All Devices 0.321 -- 0.403 -- 0.471 -- ns tHD_GDDRX2_centered Data Hold after CLK Input All Devices 0.321 -- 0.403 -- 0.471 -- ns fDATA_GDDRX2_centered GDDRX2 Data Rate All Devices -- 800 -- 700 -- 624 Mb/s fMAX_GDDRX2_centered GDDRX2 CLK Frequency (ECLK) All Devices -- 400 -- 350 -- 312 MHz Generic DDRX2 Inputs With Clock and Data Aligned at Pin (GDDRX2_RX.ECLK.Aligned) Using PCLK Clock Input, Left and Right sides Only - Figure 3.7 - ns + 1/2 tSU_GDDRX2_aligned Data Setup from CLK Input All Devices -- -0.344 -- -0.42 -- 0.495 UI ns + 1/2 tHD_GDDRX2_aligned Data Hold from CLK Input All Devices 0.344 -- 0.42 -- 0.495 -- UI fDATA_GDDRX2_aligned GDDRX2 Data Rate All Devices -- 800 -- 700 -- 624 Mb/s GDDRX2 CLK Frequency fMAX_GDDRX2_aligned All Devices -- 400 -- 350 -- 312 MHz Video DDRX71 Inputs(ECLK) With Clock and Data Aligned at Pin (GDDRX71_RX.ECLK) Using PLL Clock Input, Left and Right sides Only Figure 3.11 Data Setup from CLK Input ns+(1/2+i) tSU_LVDS71_i All Devices -- -0.271 -- -0.39 -- -0.41 (bit i) UI Data Hold from CLK Input ns+(1/2+i) tHD_LVDS71_i All Devices 0.271 -- 0.39 -- 0.41 -- (bit i) UI fDATA_LVDS71 DDR71 Data Rate All Devices -- 756 -- 620 -- 525 Mb/s fMAX_LVDS71 DDR71 CLK Frequency (ECLK) All Devices -- 378 -- 310 -- 262.5 MHz (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 65 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.21. ECP5/ECP5-5G External Switching Characteristics (Continued) Parameter Description Device -8 Min -7 Max Min -6 Max Min Max Unit Generic DDR Output Generic DDRX1 Outputs With Clock and Data Centered at Pin (GDDRX1_TX.SCLK.Centered) Using PCLK Clock Input - Figure 3.6 Data Output Valid before CLK ns + tDVB_GDDRX1_centered All Devices -0.67 -- -0.67 -- -0.67 -- Output 1/2 UI Data Output Valid after CLK ns + tDVA_GDDRX1_centered All Devices -0.67 -- -0.67 -- -0.67 -- Output 1/2 UI fDATA_GDDRX1_centered GDDRX1 Data Rate All Devices -- 500 -- 500 -- 500 Mb/s fMAX_GDDRX1_centered GDDRX1 CLK Frequency (SCLK) All Devices -- 250 -- 250 -- 250 MHz Generic DDRX1 Outputs With Clock and Data Aligned at Pin (GDDRX1_TX.SCLK.Aligned) Using PCLK Clock Input - Figure 3.9 Data Output Invalid before tDIB_GDDRX1_aligned All Devices -0.3 -- -0.3 -- -0.3 -- ns CLK Output Data Output Invalid after CLK tDIA_GDDRX1_aligned All Devices -- 0.3 -- 0.3 -- 0.3 ns Output fDATA_GDDRX1_aligned GDDRX1 Data Rate All Devices -- 500 -- 500 -- 500 Mb/s fMAX_GDDRX1_aligned GDDRX1 CLK Frequency (SCLK) All Devices -- 250 -- 250 -- 250 MHz Generic DDRX2 Outputs With Clock and Data Centered at Pin (GDDRX2_TX.ECLK.Centered) Using PCLK Clock Input, Left and Right sides Only - Figure 3.8 Data Output Valid Before CLK - - ns + tDVB_GDDRX2_centered All Devices -- -0.56 -- -- Output 0.442 0.676 1/2 UI Data Output Valid After CLK ns + tDVA_GDDRX2_centered All Devices -- 0.442 -- 0.56 -- 0.676 Output 1/2 UI fDATA_GDDRX2_centered GDDRX2 Data Rate All Devices -- 800 -- 700 -- 624 Mb/s fMAX_GDDRX2_centered GDDRX2 CLK Frequency (ECLK) All Devices -- 400 -- 350 -- 312 MHz Generic DDRX2 Outputs With Clock and Data Aligned at Pin (GDDRX2_TX.ECLK.Aligned) Using PCLK Clock Input, Left and Right sides Only - Figure 3.9 Data Output Invalid before tDIB_GDDRX2_aligned All Devices -0.16 -- -0.18 -- -0.2 -- ns CLK Output Data Output Invalid after CLK tDIA_GDDRX2_aligned All Devices -- 0.16 -- 0.18 -- 0.2 ns Output fDATA_GDDRX2_aligned GDDRX2 Data Rate All Devices -- 800 -- 700 -- 624 Mb/s fMAX_GDDRX2_aligned GDDRX2 CLK Frequency (ECLK) All Devices -- 400 -- 350 -- 312 MHz Video DDRX71 Outputs With Clock and Data Aligned at Pin (GDDRX71_TX.ECLK) Using PLL Clock Input, Left and Right sides Only - Figure 3.12 Data Output Invalid before ns + (i) tDIB_LVDS71_i All Devices -0.16 -- -0.18 -- -0.2 -- CLK Output UI Data Output Invalid after CLK ns + (i) tDIA_LVDS71_i All Devices -- 0.16 -- 0.18 -- 0.2 Output UI fDATA_LVDS71 DDR71 Data Rate All Devices -- 756 -- 620 -- 525 Mb/s fMAX_LVDS71 DDR71 CLK Frequency (ECLK) All Devices -- 378 -- 310 -- 262.5 MHz Memory Interface DDR2/DDR3/DDR3L/LPDDR2/LPDDR3 READ (DQ Input Data are Aligned to DQS) tDVBDQ_DDR2 tDVBDQ_DDR3 Data Output Valid before DQS - - ns + 1/2 tDVBDQ_DDR3L All Devices -- -0.26 -- -- Input 0.317 0.374 UI tDVBDQ_LPDDR2 tDVBDQ_LPDDR3 tDVADQ_DDR2 tDVADQ_DDR3 tDVADQ_DDR3L tDVADQ_LPDDR2 tDVADQ_LPDDR3 Data Output Valid after DQS Input All Devices 0.26 -- 0.317 -- 0.374 -- ns + 1/2 UI (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 66 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.21. ECP5/ECP5-5G External Switching Characteristics (Continued) Parameter Description fDATA_DDR2 fDATA_DDR3 fDATA_DDR3L fDATA_LPDDR2 fDATA_LPDDR3 DDR Memory Data Rate fMAX_DDR2 fMAX_DDR3 fMAX_DDR3L fMAX_LPDDR2 fMAX_LPDDR3 DDR Memory CLK Frequency (ECLK) Device -8 -7 -6 Unit Min Max Min Max Min Max All Devices -- 800 -- 700 -- 624 Mb/s All Devices -- 400 -- 350 -- 312 MHz -0.25 -- -0.25 UI DDR2/DDR3/DDR3L/LPDDR2/LPDDR3 WRITE (DQ Output Data are Centered to DQS) tDQVBS_DDR2 tDQVBS_DDR3 Data Output Valid before tDQVBS_DDR3L All Devices -- -0.25 -- DQS Output tDQVBS_LPDDR2 tDQVBS_LPDDR3 tDQVAS_DDR2 tDQVAS_DDR3 tDQVAS_DDR3L tDQVAS_LPDDR2 tDQVAS_LPDDR3 Data Output Valid after DQS Output All Devices 0.25 -- 0.25 -- 0.25 -- UI fDATA_DDR2 fDATA_DDR3 fDATA_DDR3L fDATA_LPDDR2 fDATA_LPDDR3 DDR Memory Data Rate All Devices -- 800 -- 700 -- 624 Mb/s fMAX_DDR2 fMAX_DDR3 fMAX_DDR3L fMAX_LPDDR2 fMAX_LPDDR3 DDR Memory CLK Frequency (ECLK) All Devices -- 400 -- 350 -- 312 MHz Notes: 1. Commercial timing numbers are shown. Industrial numbers are typically slower and can be extracted from the Diamond software. 2. General I/O timing numbers are based on LVCMOS 2.5, 12 mA, Fast Slew Rate, 0pf load. Generic DDR timing are numbers based on LVDS I/O. DDR2 timing numbers are based on SSTL18. DDR3 timing numbers are based on SSTL15. LPDDR2 and LPDDR3 timing numbers are based on HSUL12. 3. Uses LVDS I/O standard for measurements. 4. Maximum clock frequencies are tested under best case conditions. System performance may vary upon the user environment. 5. All numbers are generated with the Diamond software. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 67 ECP5TM and ECP5-5GTM Family Data Sheet Rx CLK (in) Rx DATA (in) tSU/tDVBDQ tSU/tDVBDQ tHD/tDVADQ tHD/tDVADQ Figure 3.6. Receiver RX.CLK.Centered Waveforms 1/2 UI Rx CLK (in) or DQS Input 1/2 UI 1 UI Rx DATA (in) or DQ Input tSU tSU tHD tHD Figure 3.7. Receiver RX.CLK.Aligned and DDR Memory Input Waveforms 1/2 UI 1/2 UI 1/2 UI 1/2 UI Tx CLK (out) or DQS Output Tx DATA (out) or DQ Output tDVB/tDQVBS tDVB/tDQVBS tDVA/tDQVA tDVA/tDQVAS Figure 3.8. Transmit TX.CLK.Centered and DDR Memory Output Waveforms (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 68 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 1 UI Tx CLK (out) Tx DATA (out) tDIB tDIB tDIA tDIA Figure 3.9. Transmit TX.CLK.Aligned Waveforms Receiver - Shown for one LVDS Channel # of Bits Data In 756 Mb/s Clock In 108 MHz For each Channel: 7-bit Output Words to FPGA Fabric Bit # 10 - 1 11 - 2 12 - 3 13 - 4 14 - 5 15 - 6 16 - 7 0x 0x 0x 0x 0x 0x 0x Bit # 20 - 8 21 - 9 22 - 10 23 - 11 24 - 12 25 - 13 26 - 14 Bit # 30 - 15 31 - 16 32 - 17 33 - 18 34 - 19 35 - 20 36 - 21 Bit # 40 - 22 41 - 23 42 - 24 43 - 25 44 - 26 45 - 27 46 - 28 Transmitter - Shown for one LVDS Channel # of Bits Data Out 756 Mb/s Clock Out 108 MHz For each Channel: 7-bit Output Words to FPGA Fabric Bit # 00 - 1 00 - 2 00 - 3 00 - 4 00 - 5 00 - 6 00 - 7 Bit # 10 - 8 11 - 9 12 - 10 13 - 11 14 - 12 15 - 13 16 - 14 Bit # 20 - 15 21 - 16 22 - 17 23 - 18 24 - 19 25 - 20 26 - 21 Bit # 30 - 22 31 - 23 32 - 24 33 - 25 34 - 26 35 - 27 36 - 28 Figure 3.10. DDRX71 Video Timing Waveforms (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 69 ECP5TM and ECP5-5GTM Family Data Sheet Bit 0 1/2 UI Bit i 1/2 UI Bit 1 1 UI CLK (in) DATA (in) tSU_0 tHD_0 tSU_i tHD_i Figure 3.11. Receiver DDRX71_RX Waveforms Bit 0 Bit i Bit 1 1 UI CLK (out) DATA (out) tDIB_0 tDIA_0 tDIB_i tDIA_i Figure 3.12. Transmitter DDRX71_TX Waveforms (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 70 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.19. sysCLOCK PLL Timing Over recommended operating conditions. Table 3.22. sysCLOCK PLL Timing Parameter Descriptions Conditions Min Max Units fIN Input Clock Frequency (CLKI, CLKFB) -- 8 400 MHz fOUT Output Clock Frequency (CLKOP, CLKOS) -- 3.125 400 MHz fVCO PLL VCO Frequency -- 400 800 MHz Phase Detector Input Frequency -- 10 400 MHz tDT Output Clock Duty Cycle -- 45 55 % tPH4 Output Phase Accuracy -- -5 5 % fOUT 100 MHz -- 100 ps p-p fOUT < 100 MHz -- 0.025 UIPP fOUT 100 MHz -- 200 ps p-p fOUT < 100 MHz -- 0.050 UIPP fPFD > 100 MHz -- 200 ps p-p fPFD < 100 MHz -- 0.011 UIPP Divider ratio = integer At 90% or 10% -- 400 ps p-p 0.9 -- ns -- -- 15 ms -- -- 50 ns fPFD 20 MHz -- 1,000 ps p-p fPFD 3 AC Characteristics Output Clock Period Jitter tOPJIT1 Output Clock Cycle-to-Cycle Jitter Output Clock Phase Jitter tSPO Static Phase Offset tW Output Clock Pulse Width tLOCK2 PLL Lock-in Time tUNLOCK PLL Unlock Time tIPJIT Input Clock Period Jitter fPFD < 20 MHz -- 0.02 UIPP tHI Input Clock High Time 90% to 90% 0.5 -- ns tLO Input Clock Low Time 10% to 10% 0.5 -- ns tRST RST/ Pulse Width -- 1 -- ms tRSTREC RST Recovery Time -- 1 -- ns tLOAD_REG Min Pulse for CIB_LOAD_REG -- 10 -- ns -- 5 -- ns -- 4 -- VCO cycles tROTATE-SETUP tROTATE-WD Min time for CIB dynamic phase controls to be stable fore CIB_ROTATE Min pulse width for CIB_ROTATE to maintain "0" or "1" Notes: 1. Jitter sample is taken over 10,000 samples for Periodic jitter, and 2,000 samples for Cycle-to-Cycle jitter of the primary PLL output with clean reference clock with no additional I/O toggling. 2. Output clock is valid after tLOCK for PLL reset and dynamic delay adjustment. 3. Period jitter and cycle-to-cycle jitter numbers are guaranteed for fPFD > 10 MHz. For fPFD < 10 MHz, the jitter numbers may not be met in certain conditions. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 71 ECP5TM and ECP5-5GTM Family Data Sheet 3.20. SERDES High-Speed Data Transmitter Table 3.23. Serial Output Timing and Levels Symbol Description Min amplitude1, 2 Typ Max Unit VTX-DIFF-PP Peak-Peak Differential voltage on selected -25% -- 25% mV, p-p VTX-CM-DC Output common mode voltage -- VCCHTX / 2 -- mV, p-p TTX-R Rise time (20% to 80%) 50 -- -- ps TTX-F Fall time (80% to 20%) 50 -- -- ps TTX-CM-AC-P RMS AC peak common-mode output voltage -- -- 20 mV Single ended output impedance for 50/75 -20% 50/75 20% Single ended output impedance for 6K ZTX_SE -25% 6K 25% RLTX_DIFF Differential return loss (with package included) 3 -- -- -10 dB RLTX_COM Common mode return loss (with package included) 3 -- -- -6 dB Notes: 1. Measured with 50 Tx Driver impedance at VCCHTX5%. 2. Refer to TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide for settings of Tx amplitude. 3. Return los = -10 dB (differential), -6 dB (common mode) for 100 MHz f <= 1.6 GHz with 50 output impedance configuration. This includes degradation due to package effects. Table 3.24. Channel Output Jitter Description Frequency Min Typ Max Unit Deterministic 5 Gb/s -- -- TBD UI, p-p Random 5 Gb/s -- -- TBD UI, p-p Total 5 Gb/s -- -- TBD UI, p-p Deterministic 3.125 Gb/s -- -- 0.17 UI, p-p Random 3.125 Gb/s -- -- 0.25 UI, p-p Total 3.125 Gb/s -- -- 0.35 UI, p-p Deterministic 2.5 Gb/s -- -- 0.17 UI, p-p Random 2.5 Gb/s -- -- 0.20 UI, p-p Total 2.5 Gb/s -- -- 0.35 UI, p-p Deterministic 1.25 Gb/s -- -- 0.10 UI, p-p Random 1.25 Gb/s -- -- 0.22 UI, p-p Total 1.25 Gb/s -- -- 0.24 UI, p-p Notes: 1. Values are measured with PRBS 27-1, all channels operating, FPGA logic active, I/Os around SERDES pins quiet, reference clock @ 10X mode. 2. For ECP5-5G family devices only. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 72 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.21. SERDES/PCS Block Latency Table 3.25 describes the latency of each functional block in the transmitter and receiver. Latency is given in parallel clock cycles. Figure 3.13 shows the location of each block. Table 3.25. SERDES/PCS Latency Breakdown Item Description Min Avg Max Fixed Bypass Unit3 3 -- 4 -- 1 byte clk Transmit Data Latency1 T1 FPGA Bridge - Gearing disabled with same clocks FPGA Bridge - Gearing enabled 5 -- 7 -- -- word clk T2 8b10b Encoder -- -- -- 2 1 byte clk T3 SERDES Bridge transmit -- -- -- 2 1 byte clk Serializer: 8-bit mode -- -- -- 15 + 1 -- UI + ps Serializer: 10-bit mode -- -- -- 18 + 1 -- UI + ps Pre-emphasis ON -- -- -- 1 + 2 -- UI + ps Pre-emphasis OFF -- -- -- 0 + 3 -- UI + ps Equalization ON -- -- -- 1 -- UI + ps Equalization OFF -- -- -- 2 -- UI + ps Deserializer: 8-bit mode -- -- -- 10 + 3 -- UI + ps Deserializer: 10-bit mode -- -- -- 12 + 3 -- UI + ps T4 T5 Receive Data Latency2 R1 R2 R3 SERDES Bridge receive -- -- -- 2 -- byte clk R4 Word alignment 3.1 -- 4 -- 1 byte clk R5 8b10b decoder -- -- -- 1 0 byte clk R6 Clock Tolerance Compensation 7 15 23 -- 1 byte clk FPGA Bridge - Gearing disabled with same clocks 4 -- 5 -- 1 byte clk FPGA Bridge - Gearing enabled 7 -- 9 -- -- word clk FPGA Bridge FPGA Core R7 Notes: 1. 1 = -245 ps, 2 = +88 ps, 3 = +112 ps. 2. 1 = +118 ps, 2 = +132 ps, 3 = +700 ps. 3. byte clk = 8UIs (8-bit mode), or 10 UIs (10-bit mode); word clk = 16UIs (8-bit mode), or 20 UIs (10-bit mode). SERDES SERDES Bridge R2 R1 HDINPi PCS Recovered Clock REFCLK FPGA EBRD Clock WA EQ Deserializer 1:8/1:10 CDR HDINNi DEC R6 Elastic Buffer FIFO Polarity Adjust BYPASS Receiver R5 R4 R3 BYPASS R7 Down Sample FIFO Receive Data BYPASS BYPASS FPGA Receive Clock Transmit Clock REFCLK TX PLL T2 T1 FPGA Transmit Clock T3 T5 HDOUTPi T4 Serializer 8:1/10:1 HDOUTNi Transmitter Polarity Adjust Encoder Up Sample FIFO Transmit Data BYPASS BYPASS BYPASS Figure 3.13. Transmitter and Receiver Latency Block Diagram (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 73 ECP5TM and ECP5-5GTM Family Data Sheet 3.22. SERDES High-Speed Data Receiver Table 3.26. Serial Input Data Specifications Symbol Description Min Typ VRX-DIFF-S Differential input sensitivity 150 VRX-IN Input levels 0 TRX-RELOCK Input common mode range (internal DC coupled mode) Input common mode range (internal AC coupled mode)2 SCDR re-lock time1 ZRX-TERM Input termination 50/75 /High Z RLRX-RL Return loss (without package) VRX-CM-DCCM VRX-CM-ACCM Max Unit -- 1760 mV, p-p -- VCCA +0.52 V 0.6 -- VCCA V 0.1 -- VCCA +0.2 V -- 1000 -- Bits -20% 50/75/5 K +20% -- -- -10 dB Notes: 1. This is the typical number of bit times to re-lock to a new phase or frequency within 300 ppm, assuming 8b10b encoded data. 2. Up to 1.655 for ECP5, and 1.76 for ECP5-5G. 3.23. Input Data Jitter Tolerance A receiver's ability to tolerate incoming signal jitter is very dependent on jitter type. High speed serial interface standards have recognized the dependency on jitter type and have specifications to indicate tolerance levels for different jitter types as they relate to specific protocols. Sinusoidal jitter is considered to be a worst case jitter type. Table 3.27. Receiver Total Jitter Tolerance Specification Description Frequency Min Typ Max Unit 400 mV differential eye -- -- TBD UI, p-p 400 mV differential eye -- -- TBD UI, p-p Total 400 mV differential eye -- -- TBD UI, p-p Deterministic 400 mV differential eye -- -- 0.37 UI, p-p Deterministic Random Random 5 Gb/s Condition 400 mV differential eye -- -- 0.18 UI, p-p Total 400 mV differential eye -- -- 0.65 UI, p-p Deterministic 400 mV differential eye -- -- 0.37 UI, p-p Random 400 mV differential eye -- -- 0.18 UI, p-p Total 400 mV differential eye -- -- 0.65 UI, p-p Deterministic 400 mV differential eye -- -- 0.37 UI, p-p 400 mV differential eye -- -- 0.18 UI, p-p 400 mV differential eye -- -- 0.65 UI, p-p Random Total 3.125 Gb/s 2.5 Gb/s 1.25 Gb/s Notes: 1. Jitter tolerance measurements are done with protocol compliance tests: 3.125 Gb/s - XAUI Standard, 2.5 Gb/s - PCIe Standard, 1.25 Gb/s - SGMII Standard. 2. For ECP5-5G family devices only. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 74 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.24. SERDES External Reference Clock The external reference clock selection and its interface are a critical part of system applications for this product. Table 3.28 specifies reference clock requirements, over the full range of operating conditions. Table 3.28. External Reference Clock Specification (refclkp/refclkn) Symbol Description FREF Frequency range FREF-PPM Frequency tolerance1 VREF-IN-SE Input swing, single-ended clock VREF-IN-DIFF Input swing, differential clock VREF-IN Input levels Min Typ Max Unit 50 -- 320 MHz -1000 -- 1000 ppm 200 -- VCCAUXA mV, p-p 200 -- 2*VCCAUXA 0 -- VCCAUXA + 0.4 2, 4 3 mV, p-p differential V DREF Duty cycle 40 -- 60 % TREF-R Rise time (20% to 80%) 200 500 1000 ps TREF-F Fall time (80% to 20%) ZREF-IN-TERM-DIFF Differential input termination CREF-IN-CAP Input capacitance 200 500 1000 ps -30% 100/HiZ +30% -- -- 7 pF Notes: 1. Depending on the application, the PLL_LOL_SET and CDR_LOL_SET control registers may be adjusted for other tolerance values as described in TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide. 2. The signal swing for a single-ended input clock must be as large as the p-p differential swing of a differential input clock to get the same gain at the input receiver. With single-ended clock, a reference voltage needs to be externally connected to CLKREFN pin, and the input voltage needs to be swung around this reference voltage. 3. Measured at 50% amplitude. 4. Single-ended clocking is achieved by applying a reference voltage VREF on REFCLKN input, with the clock applied to REFCLKP input pin. VREF should be set to mid-point of the REFCLKP voltage swing. V+ P VREF-IN MAX < 1.56 V N 0V VREF_IN_DIFF Min=200 mV Max=2xVCCA V+ VREF_IN_DIFF= IVp-VnI V+ VREF-IN MAX < 1.56 V VREF_IN_SE Min=200 mV 0 V Max=VCCA Figure 3.14. SERDES External Reference Clock Waveforms (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 75 ECP5TM and ECP5-5GTM Family Data Sheet 3.25. PCI Express Electrical and Timing Characteristics 3.25.1. PCIe (2.5 Gb/s) AC and DC Characteristics Over recommended operating conditions. Table 3.29. PCIe (2.5 Gb/s) Symbol Description Test Conditions Min Typ Max Unit Transmit1 UI Unit interval -- 399.88 400 400.12 ps VTX-DIFF_P-P Differential peak-to-peak output voltage De-emphasis differential output -- 0.8 1.0 1.2 V -- -3 -3.5 -4 dB -- -- -- 20 mV -- -- -- 600 mV -- 0 -- V -- -- VCCHTX + 5% 90 mA 80 100 120 VTX-DE-RATIO VTX-CM-AC_P VTX-RCV-DETECT VTX-CM-DC voltage ratio RMS AC peak common-mode output voltage Amount of voltage change allowed during receiver detection Tx DC common mode voltage VTX-D+=0.0 V VTX-D-=0.0 V -- ITX-SHORT Output short circuit current ZTX-DIFF-DC Differential output impedance RLTX-DIFF Differential return loss -- 10 -- -- dB RLTX-CM Common mode return loss -- 6.0 -- -- dB TTX-RISE Tx output rise time 20% to 80% 0.125 -- -- UI TTX-FALL Tx output fall time 20% to 80% 0.125 -- -- UI LTX-SKEW Lane-to-lane static output skew for all lanes in port/link Transmitter eye width -- -- -- 1.3 ns -- 0.75 -- -- UI -- -- -- 0.125 UI -- 399.88 400 400.12 ps VRX-DIFF_P-P Unit Interval Differential peak-to-peak input voltage -- 0.343 -- 1.2 V VRX-IDLE-DET-DIFF_P-P Idle detect threshold voltage -- 65 -- 3403 mV VRX-CM-AC_P RMS AC peak common-mode input voltage -- -- -- 150 mV ZRX-DIFF-DC DC differential input impedance -- 80 100 120 ZRX-DC DC input impedance -- 40 50 60 ZRX-HIGH-IMP-DC Power-down DC input impedance -- 200K -- -- RLRX-DIFF Differential return loss -- 10 -- -- dB RLRX-CM Common mode return loss -- 6.0 -- -- dB TTX-EYE TTX-EYE-MEDIAN-TO-MAXJITTER Receive1, 2 UI Maximum time between jitter median and maximum deviation from median Notes: 1. Values are measured at 2.5 Gb/s. 2. Measured with external AC-coupling on the receiver. 3. Not in compliance with PCI Express 1.1 standard. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 76 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.25.2. PCIe (5 Gb/s) - Preliminary AC and DC Characteristics Over recommended operating conditions. Table 3.30. PCIe (5 Gb/s) Symbol Description Test Conditions Min Typ Max Unit Unit Interval Tx PLL bandwidth corresponding to PKGTX-PLL2 -- 199.94 200 200.06 ps -- 5 -- 16 MHz PKGTX-PLL2 Tx PLL Peaking -- -- -- 1 dB VTX-DIFF-PP Differential p-p Tx voltage swing -- 0.8 -- 1.2 V, p-p VTX-DIFF-PP-LOW Low power differential p-p Tx voltage swing -- 0.4 -- 1.2 V, p-p VTX-DE-RATIO-3.5dB Tx de-emphasis level ratio at 3.5dB -- 3 -- 4 dB VTX-DE-RATIO-6dB Tx de-emphasis level ratio at 6dB -- 5.5 -- 6.5 dB TMIN-PULSE Instantaneous lone pulse width -- -- -- UI TTX-RISE-FALL Transmitter rise and fall time -- -- -- UI TTX-EYE Transmitter Eye, including all jitter sources -- 0.75 -- -- UI TTX-DJ Tx deterministic jitter > 1.5 MHz -- -- -- 0.15 UI 3 ps, RMS Transmit1 UI BWTX-PKG-PLL2 TTX-RJ Tx RMS jitter < 1.5 MHz TRF-MISMATCH Tx rise/fall time mismatch -- -- -- -- -- -- 10 -- -- dB 8 -- -- dB UI Tx Differential Return Loss, including package and silicon 50 MHz < freq < 1.25 GHz 1.25 GHz < freq < 2.5 GHz RLTX-CM Tx Common Mode Return Loss, including package and silicon 50 MHz < freq < 2.5 GHz 6 -- -- dB ZTX-DIFF-DC DC differential Impedance -- -- -- 120 VTX-CM-AC-PP Tx AC peak common mode voltage, peak-peak -- -- -- ITX-SHORT Transmitter short-circuit current -- -- -- 90 mA VTX-DC-CM Transmitter DC common-mode voltage -- 0 -- 1.2 V VTX-IDLE-DIFF-DC Electrical Idle Output DC voltage -- 0 -- 5 mV VTX-IDLE-DIFF-AC-p Electrical Idle Differential Output peak voltage -- -- -- VTX-RCV-DETECT Voltage change allowed during Receiver Detect -- -- -- 600 mV TTX-IDLE-MIN Min. time in Electrical Idle -- 20 -- -- ns TTX-IDLE-SET-TO-IDLE Max. time from EI Order Set to valid Electrical Idle -- -- -- 8 ns TTX-IDLE-TO-DIFF-DATA Max. time from Electrical Idle to valid differential output -- -- -- 8 ns LTX-SKEW Lane-to-lane output skew -- -- -- RLTX-DIFF mV, p-p mV ps (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 77 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.30. PCIe (5 Gb/s) (Continued) Symbol Description Test Conditions Min Typ Max Unit Unit Interval -- 199.94 200 200.06 ps -- 0.343 -- 1.2 V, p-p -- -- 4.2 ps, RMS -- -- 88 Receive1, 2 UI VRX-DIFF-PP Differential Rx peak-peak voltage TRX-RJ-RMS Receiver random jitter tolerance (RMS) TRX-DJ Receiver deterministic jitter tolerance VRX-CM-AC Common mode noise from Rx RLRX-DIFF Receiver differential Return Loss, package plus silicon RLRX-CM ZRX-DC Receiver common mode Return Loss, package plus silicon Receiver DC single ended impedance 1.5 MHz - 100 MHz Random noise -- -- ps mV, p-p -- -- 10 -- -- dB 8 -- -- dB -- 6 -- -- dB -- 40 -- 60 -- 50 MHz < freq < 1.25 GHz 1.25 GHz < freq < 2.5 GHz ZRX-HIGH-IMP-DC Receiver DC single ended impedance when powered down -- 200K -- VRX-CM-AC-P Rx AC peak common mode voltage -- -- -- VRX-IDLE-DET-DIFF-PP Electrical Idle Detect Threshold -- 65 -- 3403 LRX-SKEW Receiver lane-lane skew -- -- -- 8 mV, peak mv, pp ns Notes: 1. Values are measured at 5 Gb/s. 2. Measured with external AC-coupling on the receiver. 3. Not in compliance with PCI Express standard. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 78 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.26. CPRI LV2 E.48 Electrical and Timing Characteristics - Preliminary Table 3.31. CPRI LV2 E.48 Electrical and Timing Characteristics Symbol Description Test Conditions Min Typ Max Unit Unit Interval -- 203.43 203.45 203.47 ps Duty Cycle Distortion -- -- -- 0.05 UI JUBHPJ Uncorrelated Bounded High Probability Jitter -- -- -- 0.15 UI JTOTAL Total Jitter -- -- -- 0.3 UI ZRX-DIFF-DC DC differential Impedance -- 80 -- 120 TSKEW Skew between differential signals -- -- -- 9 ps 100 MHz < freq < 3.6864 GHz -- -- -8 dB RLTX-DIFF Tx Differential Return Loss (S22), including package and silicon 3.6864 GHz < freq < 4.9152 GHz -- -- -8 + 16.6 *log (freq/3.6864) dB Transmit UI TDCD RLTX-CM Tx Common Mode Return Loss, including package and silicon 100 MHz < freq < 3.6864 GHz 6 -- -- dB ITX-SHORT Transmitter short-circuit current -- -- -- 100 mA TRISE_FALL-DIFF Differential Rise and Fall Time -- -- -- ps LTX-SKEW Lane-to-lane output skew -- -- -- Receive UI VRX-DIFF-PP Unit Interval -- 203.43 203.45 203.47 ps Differential Rx peak-peak voltage -- -- -- 1.2 V, p-p VRX-EYE_Y1_Y2 Receiver eye opening mask, Y1 and Y2 -- 62.5 -- 375 mV, diff VRX-EYE_X1 Receiver eye opening mask, X1 -- -- -- 0.3 UI TRX-TJ Receiver total jitter tolerance (not including sinusoidal) -- -- -- 0.6 UI 100 MHz < freq < 3.6864 GHz 3.6864 GHz < freq < 4.9152 GHz -- -- -8 dB RLRX-DIFF Receiver differential Return Loss, package plus silicon -- -- -8 + 16.6 *log (freq/3.6864) dB RLRX-CM Receiver common mode Return Loss, package plus silicon -- 6 -- -- dB ZRX-DIFF-DC Receiver DC differential impedance -- 80 100 120 ps Note: Data is measured with PRBS7 data pattern, not with PRBS-31 pattern. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 79 ECP5TM and ECP5-5GTM Family Data Sheet 3.27. XAUI/CPRI LV E.30 Electrical and Timing Characteristics 3.27.1. AC and DC Characteristics Over recommended operating conditions. Table 3.32. Transmit Symbol Description Test Conditions Min Typ Max TRF Differential rise/fall time 20% to 80% -- 80 -- ZTX_DIFF_DC Differential impedance -- 80 100 120 JTX_DDJ2, 3 Output data deterministic jitter -- -- -- 0.17 JTX_TJ1, 2, 3 Total output data jitter -- -- -- 0.35 Notes: 1. Total jitter includes both deterministic jitter and random jitter. 2. Jitter values are measured with each CML output AC coupled into a 50 impedance (100 differential impedance). 3. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. Unit ps UI UI Over recommended operating conditions. Table 3.33. Receive and Jitter Tolerance Symbol Description RLRX_DIFF Differential return loss RLRX_CM Common mode return loss Test Conditions Min Typ Max Unit 10 -- -- dB 6 -- -- dB 120 0.37 0.18 0.10 0.65 -- UI UI UI UI UI From 100 MHz to 3.125 GHz From 100 MHz to 3.125 GHz -- -- -- -- -- -- ZRX_DIFF Differential termination resistance 80 100 1, 2, 3 JRX_DJ Deterministic jitter tolerance (peak-to-peak) -- -- JRX_RJ1, 2, 3 Random jitter tolerance (peak-to-peak) -- -- JRX_SJ1, 2, 3 Sinusoidal jitter tolerance (peak-to-peak) -- -- 1, 2, 3 JRX_TJ Total jitter tolerance (peak-to-peak) -- -- TRX_EYE Receiver eye opening 0.35 -- Notes: 1. Total jitter includes deterministic jitter, random jitter and sinusoidal jitter. 2. Jitter values are measured with each high-speed input AC coupled into a 50 impedance. 3. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. 3.28. CPRI LV E.24 Electrical and Timing Characteristics 3.28.1. AC and DC Characteristics Table 3.34. Transmit Symbol TRF 1 Differential rise/fall time ZTX_DIFF_DC JTX_DDJ Description 3, 4 JTX_TJ2, 3, 4 Test Conditions Min Typ Max Unit 20% to 80% -- 80 -- ps Differential impedance -- 80 100 120 Output data deterministic jitter -- -- -- 0.17 UI Total output data jitter -- -- -- 0.35 UI Notes: 1. Rise and Fall times measured with board trace, connector and approximately 2.5 pf load. 2. Total jitter includes both deterministic jitter and random jitter. The random jitter is the total jitter minus the actual deterministic jitter. 3. Jitter values are measured with each CML output AC coupled into a 50 impedance (100 differential impedance). 4. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 80 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.35. Receive and Jitter Tolerance Symbol Description Min Typ Max Unit RLRX_DIFF RLRX_CM ZRX_DIFF Differential return loss Common mode return loss Differential termination resistance From 100 MHz to 2.5 GHz From 100 MHz to 2.5 GHz -- 10 6 80 -- -- 100 -- -- 120 dB dB JRX_DJ2, 3, 4 JRX_RJ2, 3, 4 Deterministic jitter tolerance (peak-to-peak) -- -- -- 0.37 UI Random jitter tolerance (peak-to-peak) -- -- -- 0.18 UI 2, 3, 4 Sinusoidal jitter tolerance (peak-to-peak) -- -- -- 0.10 UI 1, 2, 3, 4 Total jitter tolerance (peak-to-peak) -- -- -- 0.65 UI Receiver eye opening -- 0.35 -- -- UI JRX_SJ Test Conditions JRX_TJ TRX_EYE Notes: 1. Total jitter includes deterministic jitter, random jitter and sinusoidal jitter. 2. Jitter values are measured with each high-speed input AC coupled into a 50 impedance. 3. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. 4. Jitter tolerance, Differential Input Sensitivity and Receiver Eye Opening parameters are characterized when Full Rx Equalization is enabled. 3.29. Gigabit Ethernet/SGMII/CPRI LV E.12 Electrical and Timing Characteristics 3.29.1. AC and DC Characteristics Table 3.36. Transmit Symbol Description TRF Differential rise/fall time Test Conditions Min Typ Max Unit 20% to 80% -- 80 -- ps ZTX_DIFF_DC JTX_DDJ2, 3 Differential impedance -- 80 100 120 Output data deterministic jitter -- -- -- 0.10 UI JTX_TJ1, 2, 3 Total output data jitter -- -- -- 0.24 UI Notes: 1. Total jitter includes both deterministic jitter and random jitter. The random jitter is the total jitter minus the actual deterministic jitter. 2. Jitter values are measured with each CML output AC coupled into a 50 impedance (100 differential impedance). 3. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. Table 3.37. Receive and Jitter Tolerance Symbol Description Test Conditions Min Typ Max Unit RLRX_DIFF Differential return loss From 100 MHz to 1.25 GHz 10 -- -- dB RLRX_CM Common mode return loss From 100 MHz to 1.25 GHz 6 -- -- dB ZRX_DIFF Differential termination resistance -- 80 100 120 JRX_DJ1, 2, 3, 4 Deterministic jitter tolerance (peak-to-peak) -- -- -- 0.34 UI JRX_RJ1, 2, 3, 4 Random jitter tolerance (peak-to-peak) -- -- -- 0.26 UI JRX_SJ Sinusoidal jitter tolerance (peak-to-peak) -- -- -- 0.11 UI JRX_TJ1, 2, 3, 4 Total jitter tolerance (peak-to-peak) -- -- -- 0.71 UI TRX_EYE Receiver eye opening -- 0.29 -- -- UI 1, 2, 3, 4 Notes: 1. Total jitter includes deterministic jitter, random jitter and sinusoidal jitter. 2. Jitter values are measured with each high-speed input AC coupled into a 50 impedance. 3. Jitter and skew are specified between differential crossings of the 50% threshold of the reference signal. 4. Jitter tolerance, Differential Input Sensitivity and Receiver Eye Opening parameters are characterized when Full Rx Equalization is enabled. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 81 ECP5TM and ECP5-5GTM Family Data Sheet 3.30. SMPTE SD/HD-SDI/3G-SDI (Serial Digital Interface) Electrical and Timing Characteristics 3.30.1. AC and DC Characteristics Table 3.38. Transmit Symbol Description BRSDO Serial data rate TJALIGNMENT2 Serial output jitter, alignment TJALIGNMENT2 Serial output jitter, alignment TJALIGNMENT1, 2 Serial output jitter, alignment Test Conditions Min Typ Max Unit -- 270 -- 2975 Mb/s 270 Mb/s6 -- -- 0.2 UI 1485 Mb/s -- -- 0.2 UI 2970 Mb/s -- -- 0.3 UI Mb/s6 TJTIMING Serial output jitter, timing 270 -- -- 0.2 UI TJTIMING Serial output jitter, timing 1485 Mb/s -- -- 1 UI TJTIMING Serial output jitter, timing 2970 Mb/s -- -- 2 UI Notes: 1. Timing jitter is measured in accordance with SMPTE serial data transmission standards. 2. Jitter is defined in accordance with SMPTE RP1 184-1996 as: jitter at an equipment output in the absence of input jitter. 3. All Tx jitter are measured at the output of an industry standard cable driver, with the Lattice SERDES device configured to 50 output impedance connecting to the external cable driver with differential signaling. 4. The cable driver drives: RL=75 , AC-coupled at 270, 1485, or 2970 Mb/s. 5. All LFE5UM/LFE5UM5G devices are compliant with all SMPTE compliance tests, except 3G-SDI Level-A pathological compliance pattern test. 6. 270 Mb/s is supported with Rate Divider only. Table 3.39. Receive Symbol Description BRSDI Serial input data rate Test Conditions Min Typ Max Unit -- 270 -- 2970 Mb/s Test Conditions Min Typ Max Unit Table 3.40. Reference Clock Symbol Description FVCLK Video output clock frequency -- 54 -- 148.5 MHz DCV Duty cycle, video clock -- 45 50 55 % Note: SD-SDI (270 Mb/s) is supported with Rate Divider only. For Single Rate: Reference Clock = 54 MHz and Rate Divider = /2. For Tri-Rate: Reference Clock = 148.5 MHz and Rate Divider = /11. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 82 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 3.31. sysCONFIG Port Timing Specifications Over recommended operating conditions. Table 3.41. ECP5/ECP5-5G sysCONFIG Port Timing Specifications Symbol Parameter Min Max Unit 33 ms POR, Configuration Initialization, and Wakeup tICFG Time from the Application of VCC, VCCAUX or VCCIO8 (whichever is the last) to the rising edge of INITN -- -- tVMC Time from tICFG to the valid Master CCLK -- -- 5 us tCZ CCLK from Active to High-Z -- -- 300 ns -20 20 % 40 60 % Master CCLK fMCLK Frequency tMCLK-DC Duty Cycle All selected frequencies All selected frequencies All Configuration Modes tPRGM PROGRAMN LOW pulse accepted -- 110 -- ns tPRGMRJ PROGRAMN LOW pulse rejected -- -- 50 ns tINITL INITN LOW time -- -- 55 ns tDPPINT PROGRAMN LOW to INITN LOW -- -- 70 ns tDPPDONE PROGRAMN LOW to DONE LOW -- -- 80 ns tIODISS PROGRAMN LOW to I/O Disabled -- -- 150 ns fCCLK CCLK input clock frequency -- -- 60 MHz tCCLKH CCLK input clock pulsewidth HIGH -- 6 -- ns tCCLKL CCLK input clock pulsewidth LOW -- 6 -- ns tSTSU CCLK setup time -- 1 -- ns tSTH CCLK hold time -- 1 -- ns tSTCO CCLK falling edge to valid output -- -- 10 ns tSTOZ CCLK falling edge to valid disable -- -- 10 ns tSTOV CCLK falling edge to valid enable -- -- 10 ns tSCS Chip Select HIGH time -- 25 -- ns tSCSS Chip Select setup time -- 3 -- ns tSCSH Chip Select hold time -- 3 -- ns fCCLK Max selected CCLK output frequency -- -- 62 MHz tCCLKH CCLK output clock pulse width HIGH -- 3.5 -- ns tCCLKL CCLK output clock pulse width LOW -- 3.5 -- ns tSTSU CCLK setup time -- 5 -- ns tSTH CCLK hold time -- 1 -- ns tCSSPI INITN HIGH to Chip Select LOW -- 100 200 ns tCFGX INITN HIGH to first CCLK edge -- -- 150 ns fCCLK CCLK input clock frequency -- -- 66 MHz tSSCH CCLK input clock pulse width HIGH -- 5 -- ns tSSCL CCLK input clock pulse width LOW -- 5 -- ns tSUSCDI CCLK setup time -- 0.5 -- ns tHSCDI CCLK hold time -- 1.5 -- ns Slave SPI Master SPI Slave Serial (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 83 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.41. ECP5/ECP5-5G sysCONFIG Port Timing Specifications (Continued) Symbol Parameter Min Max Unit Slave Parallel fCCLK CCLK input clock frequency -- -- 50 MHz tBSCH CCLK input clock pulsewidth HIGH -- 6 -- ns tBSCL CCLK input clock pulsewidth LOW -- 6 -- ns tCORD CCLK to DOUT for Read Data -- -- 12 ns tSUCBDI Data Setup Time to CCLK -- 1.5 -- ns tHCBDI Data Hold Time to CCLK -- 1.5 -- ns tSUCS CSN, CSN1 Setup Time to CCLK -- 2.5 -- ns tHCS CSN, CSN1 Hold Time to CCLK -- 1.5 -- ns tSUWD WRITEN Setup Time to CCLK -- 45 -- ns tHCWD WRITEN Hold Time to CCLK -- 2 -- ns tDCB CCLK to BUSY Delay Time -- -- 12 ns t BSCYC t BSCL t BSCH CCLK t SUCS t HCS tSUWD t HWD CS1N CSN WRITEN t DCB BUSY tCORD D[0:7] Byte 0 Byte 1 Byte 2 Byte n* *n = last byte of read cycle. Figure 3.15. sysCONFIG Parallel Port Read Cycle (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 84 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet tBSCYC tBSCL t BSCH CCLK* tSUCS tHCS CS1N CSN tSUWD tHWD WRITEN tDCB BUSY tHCBDI t SUCBDI D[0:7] Byte 0 Byte 1 Byte n Byte 2 *In Master Parallel Mode the FPGA provides CCLK (MCLK). In Slave Parallel Mode the external device provides CCLK. Figure 3.16. sysCONFIG Parallel Port Write Cycle tSSCL tSSCH CCLK (input) tHSCDI tSUSCDI DIN tCODO DOUT Figure 3.17. sysCONFIG Slave Serial Port Timing (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 85 ECP5TM and ECP5-5GTM Family Data Sheet VCC/VCCAUX/ VCCIO8 1 tICFG INITN DONE t VMC CCLK 2 CFG[2:0]3 Valid 1. Time taken from VCC, VCCAUX or VCCIO8, whichever is the last to cross the POR trip point. 2. Device is in a Master Mode (SPI, SPIm). 3. The CFG pins are normally static (hardwired). Figure 3.18. Power-On-Reset (POR) Timing tICFG VCC CCLK tSSCH tVMC Wake Up Clocks tSSCL tPRGM tPRGMRJ PROGRAMN tDPPINIT INITN tHSCDI (tHMCDI) tSUSCDI (tSUMCDI) DONE tCODO tDPPDONE DI GOE Release DOUT tIOENSS sysIO tIODISS Figure 3.19. sysCONFIG Port Timing (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 86 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet t PRGMRJ PROGRAMN INITN t DPPI NIT DONE t DI NITD CCLK CFG[2:0]* Valid t IODISS USER I/O *The CFG pins are normally static (hardwired). Figure 3.20. Configuration from PROGRAMN Timing PROGRAMN INITN DONE Wake-Up tMWC CCLK tIOENSS USER I/O Figure 3.21. Wake-Up Timing (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 87 ECP5TM and ECP5-5GTM Family Data Sheet Capture CR0 Capture CFGx VCC PROGRAMN DONE INITN CSSPIN 0 1 2 3 ... 7 8 9 10 ... 31 32 33 34 ... 127 128 CCLK Opcode SISPI Address Ignore SOSPI Valid Bitstream Figure 3.22. Master SPI Configuration Waveforms 3.32. JTAG Port Timing Specifications Over recommended operating conditions. Table 3.42. JTAG Port Timing Specifications Symbol Parameter Min Max Units fMAX tBTCPH TCK clock frequency -- 25 MHz TCK [BSCAN] clock pulse width high 20 -- ns tBTCPL TCK [BSCAN] clock pulse width low 20 -- ns tBTS TCK [BSCAN] setup time 10 -- ns tBTH TCK [BSCAN] hold time 8 -- ns tBTRF TCK [BSCAN] rise/fall time 50 -- mV/ns tBTCO TAP controller falling edge of clock to valid output -- 10 ns tBTCODIS TAP controller falling edge of clock to valid disable -- 10 ns tBTCOEN TAP controller falling edge of clock to valid enable -- 10 ns tBTCRS BSCAN test capture register setup time 8 -- ns tBTCRH BSCAN test capture register hold time 25 -- ns tBUTCO BSCAN test update register, falling edge of clock to valid output -- 25 ns tBTUODIS BSCAN test update register, falling edge of clock to valid disable -- 25 ns tBTUPOEN BSCAN test update register, falling edge of clock to valid enable -- 25 ns (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 88 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet TMS TDI tBTS tBTCPH tBTH tBTCP tBTCPL TCK tBTCO tBTCOEN TDO tBTCODIS V a lid D a ta tBTCRH tBTCRS Data to be Captured from I/O V a lid D a ta Data Captured tBTUPOEN tBUTCO Data to be driven out to I/O V a lid D a ta tBTUODIS V a lid D a ta Figure 3.23. JTAG Port Timing Waveforms 3.33. Switching Test Conditions Figure 3.24 shows the output test load that is used for AC testing. The specific values for resistance, capacitance, voltage, and other test conditions are listed in Table 3.43. VT R1 Test Point DUT R2 CL* *CL Includes Test Fixture and Probe Capacitance Figure 3.24. Output Test Load, LVTTL and LVCMOS Standards (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 89 ECP5TM and ECP5-5GTM Family Data Sheet Table 3.43. Test Fixture Required Components, Non-Terminated Interfaces Test Condition LVTTL and other LVCMOS settings (L H, H L) R1 R2 CL 0 pF Timing Ref. VT LVCMOS 3.3 = 1.5 V -- LVCMOS 2.5 = VCCIO/2 -- LVCMOS 1.8 = VCCIO/2 -- LVCMOS 1.5 = VCCIO/2 -- LVCMOS 1.2 = VCCIO/2 -- VCCIO/2 -- 1 M 0 pF LVCMOS 2.5 I/O (Z L) 1 M VCCIO/2 VCCIO 100 0 pF LVCMOS 2.5 I/O (H Z) 0 pF VOH - 0.10 -- VOL + 0.10 VCCIO LVCMOS 2.5 I/O (Z H) LVCMOS 2.5 I/O (L Z) 100 0 pF Note: Output test conditions for all other interfaces are determined by the respective standards. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 90 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 4. Pinout Information 4.1. Signal Descriptions Signal Name I/O Description General Purpose P[L/R] [Group Number]_[A/B/C/D] I/O P[T/B][Group Number]_[A/B] I/O GSRN I [L/R] indicates the L (Left), or R (Right) edge of the device. [Group Number] indicates the PIO [A/B/C/D] group. [A/B/C/D] indicates the PIO within the PIC to which the pad is connected. Some of these user-programmable pins are shared with special function pins. These pins, when not used as special purpose pins, can be programmed as I/Os for user logic. During configuration the user-programmable I/Os are tristated with an internal pull-down resistor enabled. If any pin is not used (or not bonded to a package pin), it is tristated and default to have pull-down enabled after configuration. PIO A and B are grouped as a pair, and PIO C and D are group as a pair. Each pair supports true LVDS differential input buffer. Only PIO A and B pair supports true LVDS differential output buffer. Each A/B and C/D pair supports programmable on/off differential input termination of 100 . [T/B] indicates the T (top) or B (bottom) edge of the device. [Group Number] indicates the PIO [A/B] group. [A/B] indicates the PIO within the PIC to which the pad is connected. Some of these user-programmable pins are shared with sysConfig pins. These pins, when not used as configuration pins, can be programmed as I/Os for user logic. During configuration, the pins not used in configuration are tristated with an internal pull-down resistor enabled. If any pin is not used (or not bonded to a package pin), it is tristated and default to have pull-down enabled after configuration. PIOs on top and bottom do not support differential input signaling or true LVDS output signaling, but it can support emulated differential output buffer. PIO A/B forms a pair of emulated differential output buffer. Global RESET signal (active low). Any I/O pin can be GSRN. NC -- No connect. RESERVED -- This pin is reserved and should not be connected to anything on the board. GND -- Ground. Dedicated pins. VCC -- VCCAUX -- VCCIOx -- VREF1_x -- Power supply pins for core logic. Dedicated pins. VCC = 1.1 V (ECP5), 1.2 V (ECP5UM5G) Auxiliary power supply pin. This dedicated pin powers all the differential and referenced input buffers. VCCAUX = 2.5 V. Dedicated power supply pins for I/O bank x. VCCIO8 is used for configuration and JTAG. Reference supply pins for I/O bank x. Pre-determined shared pin in each bank are assigned as VREF1 input. When not used, they may be used as I/O pins. PLL, DLL and Clock Functions [LOC][_GPLL[T, C]_IN GR_PCLK[Bank][num] PCLK[T/C][Bank]_[num] I I I/O General Purpose PLL (GPLL) input pads: [LOC] = ULC, LLC, URC and LRC, T = true and C = complement. These pins are shared I/O pins. When not configured as GPLL input pads, they can be used as general purpose I/O pins. General Routing Signals in Banks 0, 1, 2, 3, 4, 6 and 7. There are two in each bank ([num] = 0, 1). Refer to TN1263, ECP5 sysClock PLL/DLL Design and Usage Guide. These pins are shared I/O pins. When not configured as GR pins, they can be used as general purpose I/O pins. General Purpose Primary CLK pads: [T/C] = True/Complement, [Bank] = (0, 1, 2, 3, 6 and 7). There are two in each bank ([num] = 0, 1). These are shared I/ O pins. When not configured as PCLK pins, they can be used as general purpose I/O pins. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 91 ECP5TM and ECP5-5GTM Family Data Sheet Signal Name I/O Description PLL, DLL and Clock Functions (Continued) [L/R]DQS[group_num] I/O [T/R]]DQ[group_num] I/O DQS input/output pads: T (top), R (right), group_ num = ball number associated with DQS[T] pin. DQ input/output pads: T (top), R (right), group_ num = ball number associated with DQS[T] pin. Test and Programming (Dedicated Pins) TMS I TCK I TDI I TDO O Test Mode Select input, used to control the 1149.1 state machine. Pull-up is enabled during configuration. This is a dedicated input pin. Test Clock input pin, used to clock the 1149.1 state machine. No pull-up enabled. This is a dedicated input pin. Test Data in pin. Used to load data into device using 1149.1 state machine. After power-up, this TAP port can be activated for configuration by sending appropriate command. (Note: once a configuration port is selected it is locked. Another configuration port cannot be selected until the power-up sequence). Pull-up is enabled during configuration. This is a dedicated input pin. Output pin. Test Data Out pin used to shift data out of a device using 1149.1. This is a dedicated output pin. Configuration Pads (Used during sysCONFIG) CFG[2:0] INITN PROGRAMN I I/O I DONE I/O CCLK I/O HOLDN/DI/BUSY/CSSPIN/CEN I/O CSN/SN I/O CS1N I WRITEN I DOUT/CSON O D0/MOSI/IO0 I/O Mode pins used to specify configuration mode values latched on rising edge of INITN. During configuration, a pull-up is enabled. These are dedicated pins. Open Drain pin. Indicates the FPGA is ready to be configured. During configuration, a pull-up is enabled. This is a dedicated pin. Initiates configuration sequence when asserted low. This pin always has an active pull-up. This is a dedicated pin. Open Drain pin. Indicates that the configuration sequence is complete, and the startup sequence is in progress. This is a dedicated pin. Input Configuration Clock for configuring an FPGA in Slave SPI, Serial, and CPU modes. Output Configuration Clock for configuring an FPGA in Master configuration modes (Master SPI, Master Serial). This is a dedicated pin. Parallel configuration mode busy indicator. SPI/SPIm mode data output. This is a shared I/O pin. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. Parallel configuration mode active-low chip select. Slave SPI chip select. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. Parallel configuration mode active-low chip select. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. Write enable for parallel configuration modes. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. Serial data output. Chip select output. SPI/SPIm mode chip select. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. Parallel configuration I/O. Open drain during configuration. When in SPI modes, it is an output in Master mode, and input in Slave mode. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 92 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Signal Name I/O Description Configuration Pads (Used during sysCONFIG) (Continued) Parallel configuration I/O. Open drain during configuration. When in SPI modes, it is an input in Master mode, and output in Slave mode. D1/MISO/IO1 I/O This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. D2/IO2 I/O Parallel configuration I/O. Open drain during configuration. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. D3/IO3 I/O Parallel configuration I/O. Open drain during configuration. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. D4/IO4 I/O Parallel configuration I/O. Open drain during configuration. This is a shared I/ O pin. When not in configuration, it can be used as general purpose I/O pin. D5/IO5 I/O Parallel configuration I/O. Open drain during configuration. This is a shared I/ O pin. When not in configuration, it can be used as general purpose I/O pin. I/O Parallel configuration I/O. Open drain during configuration. When in SPI modes, it is an output in Master mode, and input in Slave mode. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin. I/O Parallel configuration I/O. Open drain during configuration. When in SPI modes, it is an output in Master mode, and input in Slave mode. This is a shared I/O pin. When not in configuration, it can be used as general purpose I/O pin D6/IO6 D7/IO7 SERDES Function VCCAx -- VCCAUXAx -- HDRX[P/N]_D[dual_num]CH[chan_num] I HDTX[P/N]_D[dual_num]CH[chan_num] O REFCLK[P/N]_D[dual_num] I VCCHRX_D[dual_num]CH[chan_num] -- VCCHTX_D[dual_num]CH[chan_num] -- SERDES, transmit, receive, PLL and reference clock buffer power supply for SERDES Dual x. All VCCA supply pins must always be powered to the recommended operating voltage range. If no SERDES channels are used, connect VCCA to VCC. VCCAx = 1.1 V for ECP5, VCCAx = 1.2 V for ECP5-5G. SERDES Aux Power Supply pin for SERDES Dual x. VCCAUXAx = 2.5 V. High-speed SERDES inputs, P = Positive, N = Negative, dual_num = [0, 1], chan_num = [0, 1]. These are dedicated SERDES input pins. High-speed SERDES outputs, P = Positive, N = Negative, dual_num = [0, 1], chan_num = [0, 1]. These are dedicated SERDES output pins. SERDES Reference Clock inputs, P = Positive, N = Negative, dual_num = [0, 1]. These are dedicated SERDES input pins. SERDES High-Speed Inputs Termination Voltage Supplies, dual_num = [0, 1], chan_num = [0, 1]. These pins should be powered to 1.1 V on ECP5, or 1.2 V on ECP5-5G. SERDES High-Speed Outputs Buffer Voltage Supplies, dual_num = [0, 1], chan_num = [0, 1]. These pins should be powered to 1.1 V on ECP5, or 1.2 V on ECP5-5G. Notes: 1. When placing switching I/Os around these critical pins that are designed to supply the device with the proper reference or supply voltage, care must be given. 2. These pins are dedicated inputs or can be used as general purpose I/O. 3. m defines the associated channel in the quad. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 93 ECP5TM and ECP5-5GTM Family Data Sheet 4.2. PICs and DDR Data (DQ) Pins Associated with the DDR Strobe (DQS) Pin PICs Associated with DQS Strobe PIO within PIC DDR Strobe (DQS) and Data (DQ) Pins For Left and Right Edges of the Device Only P[L/R] [n-6] P[L/R] [n-3] P[L/R] [n] P[L/R] [n+3] A DQ B DQ C DQ D DQ A DQ B DQ C DQ D DQ A DQS (P) B DQS (N) C DQ D DQ A DQ B DQ C DQ D DQ Note: "n" is a row PIC number. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 94 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet 4.3. Pin Information Summary 4.3.1. LFE5UM/LFE5UM5G LFE5UM/ LFE5UM5G-25 Pin Information Summary 285 csfBG A 381 caBGA 285 csfBGA 6 24 6 Bank 1 6 32 Bank 2 21 Bank 3 28 Pin Type Bank 0 General Purpose Inputs/Outputs per Bank LFE5UM/LFE5UM5G-45 LFE5UM/LFE5UM5G-85 381 caBG A 554 caBGA 285 csfBGA 381 caBG A 554 caBGA 756 caBGA 27 32 6 6 33 40 27 32 56 6 33 40 48 32 21 32 32 28 33 32 21 34 32 48 48 28 33 48 64 Bank 4 0 0 0 0 0 0 0 14 24 Bank 6 26 32 26 33 48 26 33 48 64 Bank 7 18 32 18 32 32 18 32 32 48 Bank 8 13 13 13 13 13 13 13 13 13 Total Single-Ended User I/O 118 197 118 203 245 118 205 259 365 VCC 13 20 13 20 24 13 20 24 36 VCCAUX (Core) VCCIO 3 4 3 4 9 3 4 9 8 Bank 0 1 2 1 2 3 1 2 3 4 Bank 1 1 2 1 2 3 1 2 3 4 Bank 2 2 3 2 3 4 2 3 4 4 Bank 3 2 3 2 3 3 2 3 3 4 Bank 4 0 0 0 0 0 0 0 2 2 Bank 6 2 3 2 3 4 2 3 4 4 Bank 7 2 3 2 3 3 2 3 3 4 Bank 8 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 TAP Miscellaneous Dedicated Pins 7 7 7 7 7 7 7 7 7 GND 83 59 83 59 113 83 59 113 166 NC 1 8 1 2 33 1 0 17 29 Reserved 0 2 0 2 4 0 2 4 4 SERDES VCCA (SERDES) VCCAUX (SERDES) 14 28 14 28 28 14 28 28 28 VCCA0 2 2 2 2 6 2 2 6 8 VCCA1 0 2 0 2 6 0 2 6 9 VCCAUXA0 2 2 2 2 2 2 2 2 2 VCCAUXA1 GNDA (SERDES) Total Balls Bank 0 High Speed Differential Input / Output Pairs 0 2 0 2 2 0 2 2 2 26 26 26 26 49 26 26 49 60 285 381 285 381 554 285 381 554 756 0 0 0 0 0 0 0 0 0 Bank 1 0 0 0 0 0 0 0 0 0 Bank 2 10/8 16/8 10/8 16/8 16/8 10/8 17/9 16/8 24/12 Bank 3 14/7 16/8 14/7 16/8 24/12 14/7 16/8 24/12 32/16 Bank 4 0 0 0 0 0 0 0 0 0 Bank 6 13/6 16/8 13/6 16/8 24/12 13/6 16/8 24/12 32/16 Bank 7 8/6 16/8 8/6 16/8 16/8 8/6 16/8 16/8 24/12 Bank 8 0 0 0 0 0 0 0 0 0 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 95 ECP5TM and ECP5-5GTM Family Data Sheet LFE5UM/LFE5UM5G (Continued) LFE5UM/ LFE5UM5G-25 Pin Information Summary 285 csfBG A Pin Type 381 caBGA 285 csfBGA 381 caBG A LFE5UM/LFE5UM5G-85 554 caBGA 285 csfBGA 381 caBG A 554 caBGA 756 caBGA 45/2 7 0 64/32 45/27 45/27 0 0 0 65/3 3 0 80/40 0 64/3 2 0 80/40 Bank 0 0 112/5 6 0 Bank 1 0 0 0 0 0 0 0 0 0 Bank 2 1 2 1 2 2 1 2 2 3 Bank 3 2 2 2 2 3 2 2 3 4 Bank 4 0 0 0 0 0 0 0 0 0 Bank 6 2 2 2 2 3 2 2 3 4 Bank 7 1 2 1 2 2 1 2 2 3 Bank 8 0 0 0 0 0 0 0 0 0 6 8 6 8 10 6 8 10 14 Total High Speed Differential I/O Pairs DQS Groups (> 11 pins in group) LFE5UM/LFE5UM5G-45 Total DQS Groups 4.3.2. LFE5U Pin Information Summary Pin Type General Purpose Inputs/Outputs per Bank LFE5U-25 LFE5U-45 LFE5U-85 Bank 0 24 6 24 24 6 24 6 27 32 6 27 32 56 Bank 1 32 6 32 32 6 32 6 33 40 6 33 40 48 Bank 2 32 21 32 32 21 32 21 32 32 21 34 32 48 Bank 3 32 28 32 32 28 32 28 33 48 28 33 48 64 Bank 4 0 0 0 0 0 0 0 0 0 0 0 14 24 Bank 6 32 26 32 32 26 32 26 33 48 26 33 48 64 Bank 7 32 18 32 32 18 32 18 32 32 18 32 32 48 Bank 8 13 13 13 13 13 13 13 13 13 13 13 13 13 197 118 197 197 118 197 118 203 245 118 205 259 365 6 13 20 6 13 20 13 20 24 13 20 24 36 Total Single-Ended User I/O VCC 2 3 4 2 3 4 3 4 9 3 4 9 8 Bank 0 2 1 2 2 1 2 1 2 3 1 2 3 4 Bank 1 2 1 2 2 1 2 1 2 3 1 2 3 4 Bank 2 2 2 3 2 2 3 2 3 4 2 3 4 4 Bank 3 2 2 3 2 2 3 2 3 3 2 3 3 4 Bank 4 0 0 0 0 0 0 0 0 0 0 0 2 2 Bank 6 2 2 3 2 2 3 2 3 4 2 3 4 4 Bank 7 2 2 3 2 2 3 2 3 3 2 3 3 4 Bank 8 VCCAUX (Core) VCCIO LFE5U-12 256 256 285 381 285 381 285 381 554 285 381 554 756 caBGA csfBGA caBGA caBGA csfBGA caBGA csfBGA caBGA caBGA csfBGA caBGA caBGA caBGA 1 2 2 1 2 2 2 2 2 2 2 2 2 TAP 4 4 4 4 4 4 4 4 4 4 4 4 4 Miscellaneous Dedicated Pins GND 7 7 7 7 7 7 7 7 7 7 7 7 7 27 123 99 27 123 99 123 99 198 123 99 198 267 NC 0 1 26 0 1 26 1 26 33 1 26 33 29 Reserved 0 4 6 0 4 6 4 6 12 4 6 12 12 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 96 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet LFE5U (Continued) Pin Information Summary Pin Type Total Balls Total DQS Groups LFE5U-45 LFE5U-85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bank 2 16/8 10/8 16/8 16/8 10/8 16/8 10/8 16/8 16/8 10/8 17/9 Bank 3 16/8 14/7 16/8 16/8 14/7 16/8 14/7 16/8 24/12 14/7 Bank 4 0 0 0 0 0 0 0 Bank 6 16/8 13/6 16/8 16/8 13/6 16/8 13/6 16/8 24/12 13/6 Bank 7 16/8 8/6 16/8 16/8 8/6 16/8 8/6 16/8 16/8 8/6 Bank 8 0 0 0 0 0 0 0 0 0 0 Total High Speed Differential I/O Pairs Bank 0 DQS Groups (> 11 pins in group) LFE5U-25 Bank 1 Bank 0 High Speed Differential Input / Output Pairs LFE5U-12 256 256 285 381 285 381 285 381 554 285 381 554 756 caBGA csfBG caBGA caBGA csfBG caBGA csfBG caBGA caBGA csfBG caBGA caBGA caBG A A A A A 256 256 285 381 285 381 285 381 554 285 381 554 756 0 0 0 16/8 24/1 2 16/8 24/12 32/1 6 0 0 0 16/8 24/12 32/1 6 16/8 16/8 24/1 0 0 2 0 64/32 45/27 64/32 64/32 45/27 64/32 45/27 64/32 80/40 45/27 65/33 80/40 112/ 56 0 0 0 0 0 0 0 0 0 0 0 0 0 Bank 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Bank 2 2 1 2 2 1 2 1 2 2 1 2 2 3 Bank 3 2 2 2 2 2 2 2 2 3 2 2 3 4 Bank 4 0 0 0 0 0 0 0 0 0 0 0 0 0 Bank 6 2 2 2 2 2 2 2 2 3 2 2 3 4 Bank 7 2 1 2 2 1 2 1 2 2 1 2 2 3 Bank 8 0 0 0 0 0 0 0 0 0 0 0 0 0 8 6 8 8 6 8 6 8 10 6 8 10 14 (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 97 ECP5TM and ECP5-5GTM Family Data Sheet 5. Ordering Information 5.1. ECP5/ECP5-5G Part Number Description LFE5UM - XX - X XXXXX X Device Family LFE5UM (ECP5 FPGA with SERDES) Logic Capacity 25F = 25K LUTs 45F = 45K LUTs 85F = 85K LUTs Speed 6 = Slowest 7 8 = Fastest Grade C = Commercial I = Industrial Package MG285 = 285-ball csfBGA BG381 = 381-ball caBGA BG554 = 554-ball caBGA BG756 = 756-ball caBGA (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 98 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet LFE5UM5G - XX - X XXXXX X Device Family LFE5UM5G (ECP5-5G FPGA with SERDES) Logic Capacity 25F = 25K LUTs 45F = 45K LUTs 85F = 85K LUTs Speed 8 = Fastest Grade C = Commercial I = Industrial Package MG285 = 285-ball csfBGA BG381 = 381-ball caBGA BG554 = 554-ball caBGA BG756 = 756-ball caBGA (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 99 ECP5TM and ECP5-5GTM Family Data Sheet 5.2. Ordering Part Numbers 5.2.1. Commercial Part number Grade Package Pins Temp. LUTs (K) SERDES LFE5U-12F-6BG256C -6 Lead free caBGA 256 Commercial 12 No LFE5U-12F-7BG256C -7 Lead free caBGA 256 Commercial 12 No LFE5U-12F-8BG256C -8 Lead free caBGA 256 Commercial 12 No LFE5U-12F-6MG285C -6 Lead free csfBGA 285 Commercial 12 No LFE5U-12F-7MG285C -7 Lead free csfBGA 285 Commercial 12 No LFE5U-12F-8MG285C -8 Lead free csfBGA 285 Commercial 12 No LFE5U-12F-6BG381C -6 Lead free caBGA 381 Commercial 12 No LFE5U-12F-7BG381C -7 Lead free caBGA 381 Commercial 12 No LFE5U-12F-8BG381C -8 Lead free caBGA 381 Commercial 12 No LFE5U-25F-6BG256C -6 Lead free caBGA 256 Commercial 24 No LFE5U-25F-7BG256C -7 Lead free caBGA 256 Commercial 24 No LFE5U-25F-8BG256C -8 Lead free caBGA 256 Commercial 24 No LFE5U-25F-6MG285C -6 Lead free csfBGA 285 Commercial 24 No LFE5U-25F-7MG285C -7 Lead free csfBGA 285 Commercial 24 No LFE5U-25F-8MG285C -8 Lead free csfBGA 285 Commercial 24 No LFE5U-25F-6BG381C -6 Lead free caBGA 381 Commercial 24 No LFE5U-25F-7BG381C -7 Lead free caBGA 381 Commercial 24 No LFE5U-25F-8BG381C -8 Lead free caBGA 381 Commercial 24 No LFE5U-45F-6MG285C -6 Lead free csfBGA 285 Commercial 44 No LFE5U-45F-7MG285C -7 Lead free csfBGA 285 Commercial 44 No LFE5U-45F-8MG285C -8 Lead free csfBGA 285 Commercial 44 No LFE5U-45F-6BG381C -6 Lead free caBGA 381 Commercial 44 No LFE5U-45F-7BG381C -7 Lead free caBGA 381 Commercial 44 No LFE5U-45F-8BG381C -8 Lead free caBGA 381 Commercial 44 No LFE5U-45F-6BG554C -6 Lead free caBGA 554 Commercial 44 No LFE5U-45F-7BG554C -7 Lead free caBGA 554 Commercial 44 No LFE5U-45F-8BG554C -8 Lead free caBGA 554 Commercial 44 No LFE5U-85F-6MG285C -6 Lead free csfBGA 285 Commercial 84 No LFE5U-85F-7MG285C -7 Lead free csfBGA 285 Commercial 84 No LFE5U-85F-8MG285C -8 Lead free csfBGA 285 Commercial 84 No LFE5U-85F-6BG381C -6 Lead free caBGA 381 Commercial 84 No LFE5U-85F-7BG381C -7 Lead free caBGA 381 Commercial 84 No LFE5U-85F-8BG381C -8 Lead free caBGA 381 Commercial 84 No LFE5U-85F-6BG554C -6 Lead free caBGA 554 Commercial 84 No LFE5U-85F-7BG554C -7 Lead free caBGA 554 Commercial 84 No LFE5U-85F-8BG554C -8 Lead free caBGA 554 Commercial 84 No LFE5U-85F-6BG756C -6 Lead free caBGA 756 Commercial 84 No LFE5U-85F-7BG756C -7 Lead free caBGA 756 Commercial 84 No LFE5U-85F-8BG756C -8 Lead free caBGA 756 Commercial 84 No LFE5UM-25F-6MG285C -6 Lead free csfBGA 285 Commercial 24 Yes LFE5UM-25F-7MG285C -7 Lead free csfBGA 285 Commercial 24 Yes LFE5UM-25F-8MG285C -8 Lead free csfBGA 285 Commercial 24 Yes LFE5UM-25F-6BG381C -6 Lead free caBGA 381 Commercial 24 Yes (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 100 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Part number Grade Package Pins Temp. LUTs (K) SERDES LFE5UM-25F-7BG381C -7 Lead free caBGA 381 Commercial 24 Yes LFE5UM-25F-8BG381C -8 Lead free caBGA 381 Commercial 24 Yes LFE5UM-45F-6MG285C -6 Lead free csfBGA 285 Commercial 44 Yes LFE5UM-45F-7MG285C -7 Lead free csfBGA 285 Commercial 44 Yes LFE5UM-45F-8MG285C -8 Lead free csfBGA 285 Commercial 44 Yes LFE5UM-45F-6BG381C -6 Lead free caBGA 381 Commercial 44 Yes LFE5UM-45F-7BG381C -7 Lead free caBGA 381 Commercial 44 Yes LFE5UM-45F-8BG381C -8 Lead free caBGA 381 Commercial 44 Yes LFE5UM-45F-6BG554C -6 Lead free caBGA 554 Commercial 44 Yes LFE5UM-45F-7BG554C -7 Lead free caBGA 554 Commercial 44 Yes LFE5UM-45F-8BG554C -8 Lead free caBGA 554 Commercial 44 Yes LFE5UM-85F-6MG285C -6 Lead free csfBGA 285 Commercial 84 Yes LFE5UM-85F-7MG285C -7 Lead free csfBGA 285 Commercial 84 Yes LFE5UM-85F-8MG285C -8 Lead free csfBGA 285 Commercial 84 Yes LFE5UM-85F-6BG381C -6 Lead free caBGA 381 Commercial 84 Yes LFE5UM-85F-7BG381C -7 Lead free caBGA 381 Commercial 84 Yes LFE5UM-85F-8BG381C -8 Lead free caBGA 381 Commercial 84 Yes LFE5UM-85F-6BG554C -6 Lead free caBGA 554 Commercial 84 Yes LFE5UM-85F-7BG554C -7 Lead free caBGA 554 Commercial 84 Yes LFE5UM-85F-8BG554C -8 Lead free caBGA 554 Commercial 84 Yes LFE5UM-85F-6BG756C -6 Lead free caBGA 756 Commercial 84 Yes LFE5UM-85F-7BG756C -7 Lead free caBGA 756 Commercial 84 Yes LFE5UM-85F-8BG756C -8 Lead free caBGA 756 Commercial 84 Yes LFE5UM5G-25F-8MG285C -8 Lead free csfBGA 285 Commercial 24 Yes LFE5UM5G-25F-8BG381C -8 Lead free caBGA 381 Commercial 24 Yes LFE5UM5G-45F-8MG285C -8 Lead free csfBGA 285 Commercial 44 Yes LFE5UM5G-45F-8BG381C -8 Lead free caBGA 381 Commercial 44 Yes LFE5UM5G-45F-8BG554C -8 Lead free caBGA 554 Commercial 44 Yes LFE5UM5G-85F-8MG285C -8 Lead free csfBGA 285 Commercial 84 Yes LFE5UM5G-85F-8BG381C -8 Lead free caBGA 381 Commercial 84 Yes LFE5UM5G-85F-8BG554C -8 Lead free caBGA 554 Commercial 84 Yes LFE5UM5G-85F-8BG756C -8 Lead free caBGA 756 Commercial 84 Yes 5.2.2. Industrial Part number Grade Package Pins Temp. LUTs (K) SERDES LFE5U-12F-6BG256I -6 Lead free caBGA 256 Industrial 12 No LFE5U-12F-7BG256I -7 Lead free caBGA 256 Industrial 12 No LFE5U-12F-8BG256I -8 Lead free caBGA 256 Industrial 12 No LFE5U-12F-6MG285I -6 Lead free csfBGA 285 Industrial 12 No LFE5U-12F-7MG285I -7 Lead free csfBGA 285 Industrial 12 No LFE5U-12F-8MG285I -8 Lead free csfBGA 285 Industrial 12 No LFE5U-12F-6BG381I -6 Lead free caBGA 381 Industrial 12 No LFE5U-12F-7BG381I -7 Lead free caBGA 381 Industrial 12 No LFE5U-12F-8BG381I -8 Lead free caBGA 381 Industrial 12 No LFE5U-25F-6BG256I -6 Lead free caBGA 256 Industrial 24 No (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 101 ECP5TM and ECP5-5GTM Family Data Sheet Part number Grade Package Pins Temp. LUTs (K) SERDES LFE5U-25F-7BG256I -7 Lead free caBGA 256 Industrial 24 No LFE5U-25F-8BG256I -8 Lead free caBGA 256 Industrial 24 No LFE5U-25F-6MG285I -6 Lead free csfBGA 285 Industrial 24 No LFE5U-25F-7MG285I -7 Lead free csfBGA 285 Industrial 24 No LFE5U-25F-8MG285I -8 Lead free csfBGA 285 Industrial 24 No LFE5U-25F-6BG381I -6 Lead free caBGA 381 Industrial 24 No LFE5U-25F-7BG381I -7 Lead free caBGA 381 Industrial 24 No LFE5U-25F-8BG381I -8 Lead free caBGA 381 Industrial 24 No LFE5U-45F-6MG285I -6 Lead free csfBGA 285 Industrial 44 No LFE5U-45F-7MG285I -7 Lead free csfBGA 285 Industrial 44 No LFE5U-45F-8MG285I -8 Lead free csfBGA 285 Industrial 44 No LFE5U-45F-6BG381I -6 Lead free caBGA 381 Industrial 44 No LFE5U-45F-7BG381I -7 Lead free caBGA 381 Industrial 44 No LFE5U-45F-8BG381I -8 Lead free caBGA 381 Industrial 44 No LFE5U-45F-6BG554I -6 Lead free caBGA 554 Industrial 44 No LFE5U-45F-7BG554I -7 Lead free caBGA 554 Industrial 44 No LFE5U-45F-8BG554I -8 Lead free caBGA 554 Industrial 44 No LFE5U-85F-6MG285I -6 Lead free csfBGA 285 Industrial 84 No LFE5U-85F-7MG285I -7 Lead free csfBGA 285 Industrial 84 No LFE5U-85F-8MG285I -8 Lead free csfBGA 285 Industrial 84 No LFE5U-85F-6BG381I -6 Lead free caBGA 381 Industrial 84 No LFE5U-85F-7BG381I -7 Lead free caBGA 381 Industrial 84 No LFE5U-85F-8BG381I -8 Lead free caBGA 381 Industrial 84 No LFE5U-85F-6BG554I -6 Lead free caBGA 554 Industrial 84 No LFE5U-85F-7BG554I -7 Lead free caBGA 554 Industrial 84 No LFE5U-85F-8BG554I -8 Lead free caBGA 554 Industrial 84 No LFE5U-85F-6BG756I -6 Lead free caBGA 756 Industrial 84 No LFE5U-85F-7BG756I -7 Lead free caBGA 756 Industrial 84 No LFE5U-85F-8BG756I -8 Lead free caBGA 756 Industrial 84 No LFE5UM-25F-6MG285I -6 Lead free csfBGA 285 Industrial 24 Yes LFE5UM-25F-7MG285I -7 Lead free csfBGA 285 Industrial 24 Yes LFE5UM-25F-8MG285I -8 Lead free csfBGA 285 Industrial 24 Yes LFE5UM-25F-6BG381I -6 Lead free caBGA 381 Industrial 24 Yes LFE5UM-25F-7BG381I -7 Lead free caBGA 381 Industrial 24 Yes LFE5UM-25F-8BG381I -8 Lead free caBGA 381 Industrial 24 Yes LFE5UM-45F-6MG285I -6 Lead free csfBGA 285 Industrial 44 Yes LFE5UM-45F-7MG285I -7 Lead free csfBGA 285 Industrial 44 Yes LFE5UM-45F-8MG285I -8 Lead free csfBGA 285 Industrial 44 Yes LFE5UM-45F-6BG381I -6 Lead free caBGA 381 Industrial 44 Yes LFE5UM-45F-7BG381I -7 Lead free caBGA 381 Industrial 44 Yes LFE5UM-45F-8BG381I -8 Lead free caBGA 381 Industrial 44 Yes LFE5UM-45F-6BG554I -6 Lead free caBGA 554 Industrial 44 Yes LFE5UM-45F-7BG554I -7 Lead free caBGA 554 Industrial 44 Yes LFE5UM-45F-8BG554I -8 Lead free caBGA 554 Industrial 44 Yes LFE5UM-85F-6MG285I -6 Lead free csfBGA 285 Industrial 84 Yes LFE5UM-85F-7MG285I -7 Lead free csfBGA 285 Industrial 84 Yes (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 102 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Part number Grade Package Pins Temp. LUTs (K) SERDES LFE5UM-85F-8MG285I -8 Lead free csfBGA 285 Industrial 84 Yes LFE5UM-85F-6BG381I -6 Lead free caBGA 381 Industrial 84 Yes LFE5UM-85F-7BG381I -7 Lead free caBGA 381 Industrial 84 Yes LFE5UM-85F-8BG381I -8 Lead free caBGA 381 Industrial 84 Yes LFE5UM-85F-6BG554I -6 Lead free caBGA 554 Industrial 84 Yes LFE5UM-85F-7BG554I -7 Lead free caBGA 554 Industrial 84 Yes LFE5UM-85F-8BG554I -8 Lead free caBGA 554 Industrial 84 Yes LFE5UM-85F-6BG756I -6 Lead free caBGA 756 Industrial 84 Yes LFE5UM-85F-7BG756I -7 Lead free caBGA 756 Industrial 84 Yes LFE5UM-85F-8BG756I -8 Lead free caBGA 756 Industrial 84 Yes LFE5UM5G-25F-8MG285I -8 Lead free csfBGA 285 Industrial 24 Yes LFE5UM5G-25F-8BG381I -8 Lead free caBGA 381 Industrial 24 Yes LFE5UM5G-45F-8MG285I -8 Lead free csfBGA 285 Industrial 44 Yes LFE5UM5G-45F-8BG381I -8 Lead free caBGA 381 Industrial 44 Yes LFE5UM5G-45F-8BG554I -8 Lead free caBGA 554 Industrial 44 Yes LFE5UM5G-85F-8MG285I -8 Lead free csfBGA 285 Industrial 84 Yes LFE5UM5G-85F-8BG381I -8 Lead free caBGA 381 Industrial 84 Yes LFE5UM5G-85F-8BG554I -8 Lead free caBGA 554 Industrial 84 Yes LFE5UM5G-85F-8BG756I -8 Lead free caBGA 756 Industrial 84 Yes (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 103 ECP5TM and ECP5-5GTM Family Data Sheet Supplemental Information For Further Information A variety of technical notes for the ECP5/ECP5-5G family are available. TN1184, LatticeECP3, ECP-5 and ECP5-5G Soft Error Detection (SED)/Correction (SEC) Usage Guide TN1260, ECP5 and ECP5-5G sysCONFIG Usage Guide TN1261, ECP5 and ECP5-5G SERDES/PCS Usage Guide TN1262, ECP5 and ECP5-5G sysIO Usage Guide TN1263, ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide TN1264, ECP5 and ECP5-5G Memory Usage Guide TN1265, ECP5 and ECP5-5G High-Speed I/O Interface TN1266, Power Consumption and Management for ECP5 and ECP5-5G Devices TN1267, ECP5 and ECP5-5G sysDSP Usage Guide For further information on interface standards refer to the following websites: JEDEC Standards (LVTTL, LVCMOS, SSTL): www.jedec.org PCI: www.pcisig.com (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 104 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet Revision History Section Change Summary November 2017 1.8 General Description Updated Table 1.1. ECP5 and ECP5-5G Family Selection Guide Added caBGA256 package in LFE5U-12 and LFE5U-25. April 2017 1.7 All Changed document number from DS1044 to FPGA-DS-02012. General Description Updated Features section. Changed "1.1 V core power supply" to "1.1 V core power supply for ECP5, 1.2 V core power supply for ECP5UM5G". Architecture Updated Overview section. Change "The ECP5/ECP5-5G devices use 1.1 V as their core voltage" to "The ECP5 devices use 1.1V, ECP5UM5G devices use 1.2V as their core voltage" DC and Switching Characteristics Updated Table 3.2. Recommended Operating Conditions Added ECP5-5G on VCC to be 1.2V +/- 5% Added ECP5-5G on VCCA to be 1.2V +/- 3% Updated Table 3.8. ECP5/ECP5-5G Supply Current (Standby) Changed "Core Power Supply Current" for ICC on LFE5UM5G devices Changed "SERDES Power Supply Current (Per Dual)" for ICCA on LFE5UM5G devices Updated Table 3.19. Register-to-Register Performance Remove "(DDR/SDR)" from DSP Function Changed DSP functions to 225 MHz Pinout Information Update Section 4.1 Signal Description Revised Vcc Description to "Power supply pins for core logic. Dedicated pins. VCC = 1.1 V (ECP5), 1.2 V (ECP5UM5G)" All Changed document status from Preliminary to Final. Updated Features section. Changed "24K to 84K LUTs" to "12K to 84K LUTs". Added LFE5U-12 column to Table 1.1. ECP5 and ECP5-5G Family Selection Guide. Date February 2016 Version 1.6 General Description DC and Switching Characteristics Pinout Information Ordering Information Updated Power up Sequence section. Identified typical ICC current for specific devices in Table 3.8. ECP5/ECP5-5G Supply Current (Standby). Updated values in Table 3.9. ECP5. Updated values in Table 3.10. ECP5-5G. Added values to -8 Timing column of Table 3.18. Pin-to-Pin Performance. Added values to -8 Timing column of Table 3.19. Register-to-Register Performance. Changed LFE5-45 to All Devices in Table 3.21. ECP5/ECP5-5G External Switching Characteristics. Added table notes to Table 3.30. PCIe (5 Gb/s). Added table note to Table 3.31. CPRI LV2 E.48 Electrical and Timing Characteristics. Added LFE5U-12 values to Max column oftable Tablein3.38. Transmit. Added column to the LFE5U section. Updated LFE5U in ECP5/ECP5-5G Part Number Description section: added 12 F = 12K LUTs to Logic Capacity. Added LFE5U-12F information to Ordering Part Numbers section. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 105 ECP5TM and ECP5-5GTM Family Data Sheet (Continued) Date November 2015 Version 1.5 Section Change Summary All Added ECP5-5G device family. Changed document title to ECP5 and ECP5-5G Family Data Sheet. 1.4 General Description Updated Features section. Added support for eDP in RDR and HDR. Architecture Updated Overview section. Revised Figure 2.1. Simplified Block Diagram, LFE5UM/LFE5UM5G-85 Device (Top Level). Modified Flexible sysIO description and Note. Updated SERDES and Physical Coding Sublayer section. Changed E.24.V in CPRI protocol to E.24.LV. Removed "1.1 V" from paragraph on unused Dual. DC and Switching Characteristics Updated Hot Socketing Requirements section. Revised VCCHTX in table notes 1 and 3. Indicated VCCHTX in table note 4. Updated SERDES High-Speed Data Transmitter section. Revised VCCHTX in table note 1. August 2015 1.3 Ordering Information Updated ECP5/ECP5-5G Part Number Description section. Changed "LFE5 FPGA" under Device Family to "ECP5 FPGA". General Description Updated Features section. Removed SMPTE3G under Embedded SERDES. Added Single Event Upset (SEU) Mitigation Support. Removed SMPTE protocol in fifth paragraph. Architecture DC and Switching Characteristics General update. Pinout Information Updated Signal Descriptions section. Revised the descriptions of the following signals: P[L/R] [Group Number]_[A/B/C/D] P[T/B][Group Number]_[A/B] D4/IO4 (Previously named D4/MOSI2/IO4) D5/IO5 (Previously named D5/MISO/IO5) VCCHRX_D[dual_num]CH[chan_num] VCCHTX_D[dual_num]CH[chan_num] Supplemental Information General update. Added TN1184 reference. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 106 FPGA-DS-02012-1.8 ECP5TM and ECP5-5GTM Family Data Sheet (Continued) Date Version August 2014 1.2 Section All General Description Architecture Change Summary Changed document status from Advance to Preliminary. Updated Features section. Deleted Serial RapidIO protocol under Embedded SERDES. Corrected data rate under Pre-Engineered Source Synchronous I/O. DD3. LPDDR3 to DDR2/3, LPDDR2/3. Changed Mentioned transmit de-emphasis "pre- and post-cursors". Updated Overview section. Revised description of PFU blocks. Specified SRAM cell settings in describing the control of SERDES/PCS duals. Updated SERDES and Physical Coding Sublayer section. Changed PCI Express 2.0 to PCI Express Gen1 and Gen2. Deleted Serial RapidIO protocol. Updated Table 2.13. LFE5UM/LFE5UM5G SERDES Standard Support. Updated Table 2.15. LFE5UM/LFE5UM5G Mixed Protocol Support. Updated On-Chip Oscillator section. DC and Switching Characteristics Deleted "130 MHz 15% CMOS" oscillator. Updated Table 2.16. Selectable Master Clock (MCLK) Frequencies during Configuration (Nominal) Updated Absolute Maximum Ratings section. Added supply voltages VCCA and VCCAUXA. Updated sysI/O Recommended Operating Conditions section. Revised HSULD12D VCCIO values and removed table note. Updated sysI/O Single-Ended DC Electrical Characteristics section. Revised some values for SSTL15 _I, SSTL15 _II, SSTL135_I, SSTL15_II, and HSUL12. Updated External Switching Characteristics section. Changed parameters to tSKEW_PR VCCA and tSKEW_EDGE and added LFE5-85 as device. Updated ECP5 Family Timing Adders section. Added SSTL135_II buffer type data. Removed LVCMOS33_20mA, LVCMOS25_20mA, LVCMOS25_16mA, LVCMOS25D_16mA, and LVCMOS18_16mA buffer types. Changed buffer type to LVCMOS12_4mA and LVCMOS12_8mA. Updated Maximum I/O Buffer Speed section. Revised Max values. Updated sysCLOCK PLL Timing section. Revised tDT Min and Max values. Revised tOPJIT Max value. Revised number of samples in table note 1. Updated SERDES High-Speed Data Transmitter section. Updated Table 3.23. Serial Output Timing and Levels and Table 3.24. Channel Output Jitter. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. FPGA-DS-02012-1.8 107 ECP5TM and ECP5-5GTM Family Data Sheet (Continued) Date Version Section August 2014 1.2 DC and Switching Characteristics Change Summary SERDES High-Speed Data Receiver section. Updated Table 3.26. Serial Input Data Specifications, Table 3.27. Receiver Total Jitter Tolerance Specification, and Table 3.28. External Reference Clock Specification (refclkp/refclkn). Modified section heading to XXAUI/CPRI LV E.30 Electrical and Timing Characteristics. Updated Table 3.32. Transmit and Table 3.33. Receive and Jitter Tolerance. Modified section heading to CPRI LV E.24 Electrical and Timing Characteristics. Updated Table 3.34. Transmit and Table 3.35. Receive and Jitter Tolerance. Modified section heading to Gigabit Ethernet/SGMII/CPRI LV E.12 Electrical and Timing Characteristics. Updated Table 3.36. Transmit and Table 3.37. Receive and Jitter Tolerance. June 2014 1.1 Ordering Information March 2014 1.0 All Updated ECP5/ECP5-5G Part Number Description and Ordering Part Numbers sections. Initial release. (c) 2014-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 108 FPGA-DS-02012-1.8 7th Floor, 111 SW 5th Avenue Portland, OR 97204, USA T 503.268.8000 www.latticesemi.com