Electric Double Layer Capacitors(Gold Capacitor)/EN Surface Mount Type Series: EN n Feature Country of Origin 1.Re-flow soldering method available (240C) 2.Miniaturized : Dia6.8 x height 1.8mm max. 3.Longer life and environmentally friendly Japan n Recommended Applications Memory cards(power supply to hold memory), mobile phones, PDAs, digital cameras. n Specifications Category temp. range -10 to +60C 3.3 V .DC 0.2 F 10 A MAX Maximum Operating Voltage Nominal Capacitance Maximum Operating Current Category temp. range(-10C) Capacitance change 30% of initial measured value at +20C Internal resistance <10 times of initial measured value at +20C Stability at low temperature and high temperature Category temp. range(+60C) Capacitance change Internal resistance 30% of initial measured value at +20C < measured value at +20C After 500 hours application of 3.3V. DC at +60C, the capacitor shall meet the following limits. Capacitance change 30% of initial measured value Internal resistance < 20 times of initial specified value After 500 hours storage at +60C without load, the capacitor shall meet the specified limits for Endurance. Endurance Shelf Life After 500 hours storage at +40C, 90 to 95% R.H., the capacitor shall meet the following limits. Capacitance change 30% of initial measured value Internal resistance < 1 k ohm or less High temperature High humidity n Dimensions in mm (not to scale) Type A Type Ji Type RL 6.8 max. 6.8 max. +0.1 6.95 - 0.25 +0.1 0.15- 0.2 1.90.4 (1.24) 10.0max. 0.150.05 0.90.3 1.85 max. 0.90.3 0.150.03 0.50.1 20.3 1.8max. n Standard Products Maximum Operating Voltage (V.DC) 3.3 Capacitance Capacitance range (F) (F) 0.2 0.16 to 0.36 Internal resistance Min. Packaging QTY Mass Part number () at 1kHz (g) 200 0.2 (Approx.) Reel (pcs) EECEN0F204( ) 2000 The re-flow condition / taping dimensions are explained on p.205 of our Catalog. Please use it as a reference guide. ( ): Please use A,RL or J1 to indicate terminal type. Note: 1.When the capacitor is being used in a high temperature and high humidity environment for a long period, brown deposited materials might be found around the sealing area. However, the materials are insulators and will not affect any electrical characteristcs of the capacitor. 2.Do not use reflow soldering when cell voltage is above 0.3V. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. June. 2005 -- EE200 --