Electric Double Layer Capacitors(Gold Capacitor)/EN
— EE200 —
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. June. 2005
EN
Series:
Japan
n Feature
n Recommended Applications
Memory cards(power supply to hold memory),
mobile phones, PDAs, digital cameras.
n Dimensions in mm (not to scale)
1.Re-flow soldering method available (240°C)
2.Miniaturized : Diaφ6.8 x height 1.8mm max.
3.Longer life and environmentally friendly
0.15±0.05
6.8 max.
1.8max.
1.9±0.4
10.0max.
2±0.3
0.5±0.1
Type RL Type Ji
Surface Mount Type
The re-flow condition / taping dimensions are explained on p.205 of our Catalog.
Please use it as a reference guide.
( ): Please use A,RL or J1 to indicate terminal type.
After 500 hours application of 3.3V. DC at +60°C, the capacitor shall meet the following limits.
-10 to +60°C
3.3 V .DC
0.2 F
10 µA MAX
n Specifications
Category temp. range
Maximum Operating Voltage
Nominal Capacitance
Stability at low
temperature and high
temperature
Endurance
Shelf Life
±30% of initial measured value at +20°C
<10 times of initial measured value at +20°C
Capacitance change
Internal resistance
Capacitance change
Internal resistance
±30% of initial measured value
< 20 times of initial specified value
After 500 hours storage at +60°C without load, the capacitor shall meet the specified limits
for Endurance.
After 500 hours storage at +40°C, 90 to 95% R.H., the capacitor shall meet the following
limits.
Category temp. range(-10°C)
Category temp. range(+60°C)
±30% of initial measured value at +20°C
< measured value at +20°C
Capacitance change
Internal resistance
High temperature
High humidity Capacitance change
Internal resistance
±30% of initial measured value
< 1 k ohm or less
Country of Origin
Maximum Operating Current
±
±
±
±
±
±
±
±
Type A
Note: 1.When the capacitor is being used in a high temperature and high humidity environment for a long period,
brown deposited materials might be found around the sealing area. However, the materials are insulators
and will not affect any electrical characteristcs of the capacitor.
2.Do not use reflow soldering when cell voltage is above 0.3V.
3.3
(pcs)
n Standard Products
Maximum Oper-
ating Voltage
(V.DC)
Capacitance
(F)
Capacitance
range
Internal
resistance
(Ω) at 1kHz
Part number
Min. Packaging
QTY
(F)
0.2 200
0.16 to 0.36
Reel
2000
Mass
(g)
0.2 (Approx.) EECEN0F204( )
1.85 max.
0.15±0.03
0.9±0.3
0.9±0.3
6.8 max.
(1.24)
0.15
+0.1
– 0.2
6.95
+0.1
– 0.25
