STM3220G-EVAL Evaluation board with STM32F207IGH6 MCU Data brief Features 16-Mbit SRAM 1-Gbyte or more microSDTM card Boot from user Flash memory, system memory or SRAM Both ISO/IEC 14443 type A and B smartcard support I2C compatible 64-Kbit serial interface EEPROM, ST MEMS and I/O expander IEEE 802.3-2002 compliant ethernet connector Two CAN 2.0 A/B channels on the same DB connector RS-232 communication IrDA transceiver (supported up to version MB786 C-07 of the board) USB OTG (HS and FS) with Micro-AB connector Inductor motor control connector I2S audio DAC, stereo audio jack for headset 3.2" 240x320 TFT color LCD with touch screen Description 4-color LEDs Camera module and extension connector for ST camera plug-in Joystick with 4-direction control and selector Reset, wakeup, tamper and user button RTC with backup battery Extension connector for daughterboard or wrapping board JTAG, SW and trace debug support Embedded ST-LINK/V2 Five 5V power supply options: power jack, USB FS connector, USB HS connector, ST-LINK/V2 or daughterboard October 2016 1. Picture is not contractual. The STM3220G-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronics ARM(R)Cortex(R)-M3 core-based STM32F2 Series and embeds a high-performance STM32F207IGH6. The full range of hardware features on the board helps users to evaluate all the peripherals (USB OTG HS, USB OTG FS, ethernet, motor control, CAN, microSDTM card, smartcard, USART, audio DAC, RS-232, IrDA transceiver supported up to board version MB786 C-07, SRAM, ST MEMS, EEPROM and others) and to develop applications.The embedded in-circuit ST-LINK/V2 provides debugger and programmer facilities for the STM32. DocID018498 Rev 2 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com System requirements 1 2 3 STM3220G-EVAL System requirements Windows(R) OS (XP, 7, 8) USB type A to type B or Mini-B cable Development toolchains IAR EWARM (IAR Embedded Workbench(R)) Keil(R) MDK-ARMTM GCC-based IDEs (free AC6: SW4STM32, Atollic(R) TrueSTUDIO(R),...) Demonstration software Demonstration software is preloaded in the STM32F207IGH6 Flash memory for easy demonstration of the device peripherals in standalone mode. For more information and to download the latest version, refer to STM3220G-EVAL demonstration software at the www.st.com website. 4 Ordering information To order the STM3220G-EVAL evaluation board, refer to Table 1: Table 1. Ordering information 2/4 Order code Target STM32 STM3220G-EVAL STM32F207IGH6 DocID018498 Rev 2 STM3220G-EVAL 5 Revision history Revision history Table 2. Document revision history Date Revision 24-Mar-2011 1 Initial release. 2 Updated IrDA transceiver version in Features and Description. Added sections: Section 1: System requirements, Section 2: Development toolchains. 25-Oct-2016 Changes DocID018498 Rev 2 3/4 4 STM3220G-EVAL IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2016 STMicroelectronics - All rights reserved 4/4 DocID018498 Rev 2