For further information contact your local STMicroelectronics sales office.
October 2016 DocID018498 Rev 2 1/4
STM3220G-EVAL
Evaluation board with STM32F207IGH6 MCU
Data brief
Features
16-Mbit SRAM
1-Gbyte or more microSD™ card
Boot from user Flash memory, system memory
or SRAM
Both ISO/IEC 14443 type A and B smartcard
support
I2C compatible 64-Kbit serial interface
EEPROM, ST MEMS and I/O expander
IEEE 802.3-2002 compliant ethernet connector
Two CAN 2.0 A/B channels on the same DB
connector
RS-232 communication
IrDA transceiver (supported up to version
MB786 C-07 of the board)
USB OTG (HS and FS) with Micro-AB
connector
Inductor motor control connector
I2S audio DAC, stereo audio jack for headset
3.2" 240x320 TFT color LCD with touch screen
4-color LEDs
Camera module and extension connector for
ST camera plug-in
Joystick with 4-direction control and selector
Reset, wakeup, tamper and user button
RTC with backup battery
Extension connector for daughterboard or
wrapping board
JTAG, SW and trace debug support
Embedded ST-LINK/V2
Five 5V power supply options: power jack, USB
FS connector, USB HS connector, ST-LINK/V2
or daughterboard
1. Picture is not contractual.
Description
The STM3220G-EVAL evaluation board is a
complete demonstration and development
platform for STMicroelectronics
ARM®Cortex®-M3 core-based STM32F2 Series
and embeds a high-performance
STM32F207IGH6.
The full range of hardware features on the board
helps users to evaluate all the peripherals (USB
OTG HS, USB OTG FS, ethernet, motor control,
CAN, microSD™ card, smartcard, USART, audio
DAC, RS-232, IrDA transceiver supported up to
board version MB786 C-07, SRAM, ST MEMS,
EEPROM and others) and to develop
applications.The embedded in-circuit ST-LINK/V2
provides debugger and programmer facilities for
the STM32.
www.st.com
System requirements STM3220G-EVAL
2/4 DocID018498 Rev 2
1 System requirements
Windows® OS (XP, 7, 8)
USB type A to type B or Mini-B cable
2 Development toolchains
IAR EWARM (IAR Embedded Workbench®)
Keil® MDK-ARM™
GCC-based IDEs (free AC6: SW4STM32, Atollic® TrueSTUDIO®,...)
3 Demonstration software
Demonstration software is preloaded in the STM32F207IGH6 Flash memory for easy
demonstration of the device peripherals in standalone mode. For more information and to
download the latest version, refer to STM3220G-EVAL demonstration software at the
www.st.com website.
4 Ordering information
To order the STM3220G-EVAL evaluation board, refer to Table 1:
Table 1. Ordering information
Order code Target STM32
STM3220G-EVAL STM32F207IGH6
DocID018498 Rev 2 3/4
STM3220G-EVAL Revision history
4
5 Revision history
Table 2. Document revision history
Date Revision Changes
24-Mar-2011 1 Initial release.
25-Oct-2016 2
Updated IrDA transceiver version in Features and
Description.
Added sections:
Section 1: System requirements, Section 2:
Development toolchains.
STM3220G-EVAL
4/4 DocID018498 Rev 2
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
