MMSZ5225-V to MMSZ5267-V
www.vishay.com Vishay Semiconductors
Rev. 1.8, 23-Mar-12 1Document Number: 85774
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Zener Diodes
FEATURES
• Silicon planar power Zener diodes
• Standard Zener voltage tolerance is ± 5 % with
a “B” suffix (e.g.: MMSZ5225B-V), suffix “C” is
± 2 % tolerance
• These diodes are also available in MiniMELF
case with the designation TZM5225 to
TZM5267, DO-35 case with type designation
1N5225 to 1N5267 and SOT-23 case with the type
designation MMBZ5225-V to MMBZ5267-V
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
VZ range nom. 3.3 to 75 V
Test current IZT 1.7 to 20 mA
VZ specification Thermal equilibrium
Int. construction Single
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
MMSZ5225-V to MMSZ5267-V MMSZ5225-V to
MMSZ5267-V-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box
MMSZ5225-V to MMSZ5267-V MMSZ5225-V to
MMSZ5267-V-series-GS08 3000 (8 mm tape on 7" reel) 15 000/box
PACKAGE
PACKAGE NAME WEIGHT MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING
CONDITIONS
SOD-123 10.3 mg UL 94 V-0 MSL level 1
(according J-STD-020) 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation TL = 75 °C, on FR - 4 or FR - 5 board with
minimum recommended solder pad layout Ptot 500 mW
Zener current See table “Characteristics”
Thermal resistance junction to ambient air On FR - 4 or FR - 5 board with minimum
recommended solder pad layout RthJA 340 K/W
Junction temperature, maximum Tj150
°COperating temperature range Tj- 55 to + 150
Storage temperature range Tstg - 65 to + 150
MMSZ5225-V to MMSZ5267-V
www.vishay.com Vishay Semiconductors
Rev. 1.8, 23-Mar-12 2Document Number: 85774
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
•Maximum V
F = 0.9 V, at IF = 10 mA
(1) Measured with device junction in thermal equilibrium
(2) The Zener Impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the
Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the
breakdown curve and to eliminate unstable units
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER MARKING
CODE
ZENER VOLTAGE
RANGE (1)
TEST
CURRENT
REVERSE
LAEKAGE
CURRENT
DYNAMIC
RESISTANCE (2)
TEMPERATURE
COEFFICIENT
VZ at IZT1 IZT1 IZT2 IR at VRZZ at IZT1 ZZK at IZT2 VZ
VmA μA V%/°C
NOM. MAX. MAX. MAX. TYP.
MMSZ5225 C5 3 20 0.25 50 1 30 1600 - 0.075
MMSZ5226 D1 3.3 20 0.25 25 1 28 1600 - 0.07
MMSZ5227 D2 3.6 20 0.25 15 1 24 1700 - 0.065
MMSZ5228 D3 3.9 20 0.25 10 1 23 1900 - 0.06
MMSZ5229 D4 4.3 20 0.25 5 1 22 2000 - 0.055
MMSZ5230 D5 4.7 20 0.25 5 2 19 1900 ± 0.030
MMSZ5231 E1 5.1 20 0.25 5 2 17 1600 ± 0.030
MMSZ5232 E2 5.6 20 0.25 5 3 11 1600 0.038
MMSZ5233 E3 6 20 0.25 5 3.5 7 1600 0.038
MMSZ5234 E4 6.2 20 0.25 5 4 7 1000 0.045
MMSZ5235 E5 6.8 20 0.25 3 5 5 750 0.05
MMSZ5236 F1 7.5 20 0.25 3 6 6 500 0.058
MMSZ5237 F2 8.2 20 0.25 3 6.5 8 500 0.062
MMSZ5238 F3 8.7 20 0.25 3 6.5 8 600 0.065
MMSZ5239 F4 9.1 20 0.25 3 7 10 600 0.068
MMSZ5240 F5 10 20 0.25 3 8 17 600 0.075
MMSZ5241 H1 11 20 0.25 2 8.4 22 600 0.076
MMSZ5242 H2 12 20 0.25 1 9.1 30 600 0.077
MMSZ5243 H3 13 9.5 0.25 0.5 9.9 13 600 0.079
MMSZ5244 H4 14 9 0.25 0.1 10 15 600 0.082
MMSZ5245 H5 15 8.5 0.25 0.1 11 16 600 0.082
MMSZ5246 J1 16 7.8 0.25 0.1 12 17 600 0.083
MMSZ5247 J2 17 7.4 0.25 0.1 13 19 600 0.084
MMSZ5248 J3 18 7 0.25 0.1 14 21 600 0.085
MMSZ5249 J4 19 6.6 0.25 0.1 14 23 600 0.086
MMSZ5250 J5 20 6.2 0.25 0.1 15 25 600 0.086
MMSZ5251 K1 22 5.6 0.25 0.1 17 29 600 0.087
MMSZ5252 K2 24 5.2 0.25 0.1 18 33 600 0.087
MMSZ5253 K3 25 5 0.25 0.1 19 35 600 0.089
MMSZ5254 K4 27 4.6 0.25 0.1 21 41 600 0.09
MMSZ5255 K5 28 4.5 0.25 0.1 21 44 600 0.091
MMSZ5256 M1 30 4.2 0.25 0.1 23 49 600 0.091
MMSZ5257 M2 33 3.8 0.25 0.1 25 58 700 0.092
MMSZ5258 M3 36 3.4 0.25 0.1 27 70 700 0.093
MMSZ5259 M4 39 3.2 0.25 0.1 30 80 800 0.094
MMSZ5260 M5 43 3 0.25 0.1 33 93 900 0.095
MMSZ5261 N1 47 2.7 0.25 0.1 36 105 1000 0.095
MMSZ5262 N2 51 2.5 0.25 0.1 39 125 1100 0.096
MMSZ5263 N3 56 2.2 0.25 0.1 43 150 1300 0.096
MMSZ5264 N4 60 2.1 0.25 0.1 46 170 1400 0.097
MMSZ5265 N5 62 2 0.25 0.1 47 185 1400 0.097
MMSZ5266 P1 68 1.8 0.25 0.1 52 230 1600 0.097
MMSZ5267 P2 75 1.7 0.25 0.1 56 270 1700 0.098
MMSZ5225-V to MMSZ5267-V
www.vishay.com Vishay Semiconductors
Rev. 1.8, 23-Mar-12 3Document Number: 85774
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): SOD-123
0.1 (0.004) max.
2.85 (0.112)
2.55 (0.100)
3.85 (0.152)
3.55 (0.140)
1.7 (0.067)
1.40 (0.055)
Mounting Pad Layout
2.5 (0.098)
0.85 (0.033) 0.85 (0.033)
0.85 (0.033)
Cathode bar
0.65 (0.026)
0.45 (0.018)
0.10 (0.004)
1 (0.039)
0.15 (0.006)
1.35 (0.053)
0.2 (0.008)
0° to 8°
0.45 (0.018)
0.25 (0.010)
0.5 (0.020) ref.
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
