NES-SERIES DIN rail mountable type 30 ~ 240W Model name NES 120-24 Output voltage Series Output power Features DIN rail standard mounting: EN50022-357.5 or 3515 Universal input: 85 ~ 265VAC continuous input voltage Harmonic correction: IEC1000-3-2 Connection capacity: Solid or standard/Conductor sizes 0.2 ~ 2.5 mm2/24 ~ 14AWG. Standard CE marking: Low Voltage Directive Safety: EN60950/UL1950/CAS950/UL508 (Low Voltage Directive) Specifications Model 1. Input voltage range 2. Input current harmonics 3. Nominal output voltage 4. Maximum output current 5. Maximum output power 6. Output voltage range 7. Input current (*1) 8. In-rush current (*2) 9. Max. Line Regulation 10. Max. Load Regulation 11. Over Current Protection 12. Over Voltage Protection 13. Hold-up time (typ) 14. Operating temperature 15. Cooling 16. Withstand voltage System Power Supply 17. Vibration (*3) 18. Shock 19. Safety 20. Conducted & radiated noise NES30-24 NES60-24 NES120-24 NES240-24 85 ~ 265VAC (47 ~ 63Hz) continuos input voltage NES120 & NES240: Complies with EN61000-3-2 Class A 24V 24V 24V 24V 1.38A 2.5A 5.0A 10.0A 33W 60W 120W 240W 10% 10% 10% 10% 0.75/0.42A 1.2/0.6A 1.6/0.8A 3.2/1.6A 15/30A 16/32A 25/50A 28/56A 60mV (from 85 ~ 132VAC or 170 ~ 265VAC, constant load) 120mV (from no load to full load, constant input voltage) 110% ~ (current limiting with automatic recovery) 115 ~ 135% (OVP circuit will shut down output , manual reset) 20ms 0 ~ +60C (0 ~ 50C: 100%, 60C: 80%) Convection cooling Input-Chassis: 2.0kVAC, Input-Output: 3.0kVAC Output-Chassis: 500VAC for 1 minute each. 10 ~ 55 Hz amplitude (sweep 1 min.) Less than 2G X,Y,Z 1 hour each Less than 20G Approved by EN60950, UL1950, CSA950, UL508. Conforms to EN55022-B, FCC-B, VCCI-2. 21. Non-periodic over voltage According to VDE0160 22. Input transient protection Conforms to IEC1000-4-2, -3, -4, -5, -6: Criteria A. NES240-28 NES240-48 28V 8.6A 240W 10% 3.2/1.6A 28/56A 48V 5.0A 240W 10% 3.2/1.6A 28/56A *1: At 100VAC/200VAC and rated output power. *2: At 100VAC/200VAC, Ta=25C, cold start. *3: When mounting on DIN EN50022-357.5, EN55022-3515 or when using the mounting screws. Connection capacity Solid or standard/Conductor sizes: 0.2 ~ 2.5mm2 /24 ~ 14AWG. Standard with ferrules with/without plastic collar. 190 Mounting flexibility DIN Rail standard EN55022 357.5 or 3515 Conventional mounting with mounting screws also available. NES-SERIES DIN rail mountable type 30 ~ 240W NES30 (30W type) (Unit: mm) NES60 (60W type) System Power Supply (Unit: mm) 191 NES-SERIES DIN rail mountable type 30 ~ 240W NES120 (120W type) (Unit: mm) NES240 (240W type) System Power Supply (Unit: mm) 192