TAPE AND REEL LED LAMP L-132XBR-7.7/HD-TNR2.54 L-132XBR-7.7/ID-TNR2.54 L-132XBR-7.7/GD-TNR2.54 L-132XBR-7.7/YD-TNR2.54 Features BRIGHT RED HIGH EFFICIENCY RED GREEN YELLOW Description FOR THE USE OF AUTOMATIC INSERTION MACHINE. The Bright Red source color devices are made with Gallium 2.54mm STRAIGHT LEAD. Phosphide Red Light Emitting Diode. LED LAMPS ALSO AVAILABLE IN TAPE & BOX The High Efficiency Red source color devices are made PACKAGE. with Gallium Arsenide Phosphide on Gallium Phosphide UL RATING : 94V-0. Orange Light Emitting Diode. HOUSING MATERIAL: TYPE 66 NYLON. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 1 OF 7 Selection Guide Part No. Dice Iv (mcd) @ 10mA Lens Type Viewing Angle Min. Typ. L-132XBR-7.7/HD-TNR2.54 BRIGHT RED (GaP) RED DIFFUSED 1 3 L-132XBR-7.7/ID-TNR2.54 HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 8 25 L-132XBR-7.7/GD-TNR2.54 GREEN (GaP) GREEN DIFFUSED 8 15 L-132XBR-7.7/YD-TNR2.54 YELLOW (GaAsP/GaP) YELLOW DIFFUSED 5 15 2 1/2 60 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Bright Red High Efficiency Red Green Yellow D Dominate Wavelength 1/2 Units Test Conditions 700 627 565 590 nm IF=20mA Bright Red High Efficiency Red Green Yellow 660 625 568 588 nm IF=20mA Spectral Line Half-width Bright Red High Efficiency Red Green Yellow 45 45 30 35 nm IF=20mA Capacitance Bright Red High Efficiency Red Green Yellow 40 15 15 20 pF VF=0V;f=1MHz VF Forward Voltage Bright Red High Efficiency Red Green Yellow 2.25 2.0 2.2 2.1 2.5 2.5 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V C Max. Absolute Maximum Ratings at TA=25C Parameter Bright Red High Efficiency Red Green Yellow Units Power dissipation 120 105 105 105 mW DC Forward Current 25 30 25 30 mA Peak Forward Current [1] 130 160 140 140 mA 5 5 5 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 2 OF 7 L-132XBR-7.7/XX-TNR2.54 Bright Red SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 3 OF 7 High Efficiency Red SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 4 OF 7 Green SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 5 OF 7 Yellow SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 6 OF 7 Reel Dimensions L-132XBR-7.7/XX-TNR2.54 SPEC NO: DSAC8448 REV NO: V.1 DATE: JUN/25/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.H.LI PAGE: 7 OF 7