INDUSTRIAL D-Subminiature Connectors Catalog belfuse.com/cinch D-SUBMINIATURE CONNECTORS INFORMATION Introduction INDUSTRIAL The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications as well as in the military and aerospace fields. Types of D-subminiature connectors manufactured by Cinch Printed Circuit Board connectors: * Vertical connectors for panel mounting with Dip Solder PC tails. * Right-Angle connectors for board mounting with Dip Solder PC tails. Connectors for cable assemblies or wire harnesses: * Crimp and Poke. * Solder Cup. * Insulation Displacement (IDC) to terminate discrete wire. * Wire Wrap. How to read this section The information pages provide standard data common to all D-subminiature connectors. These include: * D-subminiature contact arrangements - see page 4. * Panel mounting specifications/hardware - see page 5. * D-subminiature shell dimensions - see page 6. * PCB thickness chart and PCB layout dimensions - see page 7. D-subminiature pages are grouped by series. A series is a family of connectors with a similar performance level. Each series shares a set of features and specifications, from economical and commercial grade product to highreliability and military connectors. Each series begins with a page outlining general features and specifications of connectors, followed by the pages on individual connectors with drawings or features specific to that connector. Drawings reflect clarifications of dimensions not called out in the information pages of this catalog. Accessories including backshells, junction shells, and hoods as well as hardware can be found on pages 34 thru 50. Termination tooling for Cinch connectors can be found at the end of the D-subminiature catalog. 2 D-SUBMINIATURE CONNECTORS INFORMATION Introduction INDUSTRIAL General Information All connectors are intermateable with any Cinch D-subminiature of comparable pin count and density, or the D-sub connector of any other manufacturer complying dimensionally with MIL-C-24308. Solder terminations and boardlocks meet the requirements for solderability in accordance with MIL-STD-202, Method 208. DURABILITY * Mated connectors are subjected to cycles of insertions and withdrawals specified on the catalog page. After the prescribed cycles the connectors will meet the Cinch requirements concerning insertion withdrawal force, individual contact insertionwithdrawal force, and contact resistance. APPROVALS * Most Cinch connectors have UL recognition and CSA approval; however, the specific approvals are listed on the individual catalog pages. CONTACTS * Cinch connector contacts are generally offered in Gold Flash or 30in. gold plating for commercial product, and 50in. gold plating for M24308 Series Military D-subminiature connectors. * Cinch connectors utilize economical stamped and formed contacts and/or screw machine contacts for enhanced performance. * Standard density connectors utilize size 20 contacts. METAL SHELLS * Commercial-grade steel shells are usually available in zinc plating with yellow or clear chromate finish or tin plating. * Tin-plated plugs have grounding indents. * Military grade M24308 Series connector shells are generally steel cadmium plating and yellow chromate finish. * Insulator materials are glass-filled polyester, glass-filled nylon, and diallyl phthalate. The connectors are usually available in plugs and sockets in 9, 15, 25, 37, and 50 position sizes. belfuse.com/cinch 3 D-SUBMINIATURE CONNECTORS INFORMATION Introduction INDUSTRIAL Printed Circuit Board Connectors Cinch provides connectors in various footprints, contact diameters, and lengths in both vertical and right-angle PC mount styles with dip solder tails. Cinch PCB connectors have metal shells. Connectors for Terminating Cable Wire Wire Wrap connectors are available in two tail lengths for two-wrap and three-wrap terminations. The contact is terminated by wrapping wire around it using a wire wrap gun. This connector is especially useful for prototyping since the wire can be unwrapped and rewrapped if necessary. Solder Cup connectors allow reliable long-term termination by soldering the wire directly into the connector contact. Cinch Solder Cups accommodate up to 20 AWG wire. D-subminiature Introduction Connectors Crimp and Poke connectors allow the wire to be terminated more economically than wire wrap or solder cup Contact Arrangements styles. Contacts are crimped and inserted into the connector. In our D*U Series, the contact is crimped around Information the conductor wire. Crimp and Poke connectors can be selectively loaded to save labor and material cost. Contact Arrangements Standard Density Plug Inserts Standard Density Plug Inserts 4 1.5 Density 4Plug Inserts D-subminiature Introduction Connectors D-SUBMINIATURE CONNECTORS Shells and INFORMATION Mounts Information D-subminiature Introduction Introduction Connectors Shells and Mounts Shells and Mounts Information ensions Panel Mounting Specifications Panel Mounting Specifications INDUSTRIAL Mounting Method Front/ A B C D E F H Panel Mounting Specifications Positions Rear Panel in mm in mm in mm in mm in mm in mm in mm Front 0.98 24.89 0.49 12.45 0.87 22.10 0.44 11.18 0.51 12.95 0.26 6.60 0.08 2.03 9 Rear 0.98 24.89 0.49 12.45 0.81 20.57 0.40 10.16 0.45 11.43 0.23 5.84 0.13 3.30 Front 1.31 33.27 0.66 16.76 1.10 27.94 0.60 15.24 0.51 12.95 0.26 6.60 0.08 2.03 15 Rear 1.31 33.27 0.66 16.76 1.13 28.70 0.57 14.48 0.45 11.43 0.23 5.84 0.13 3.30 Front 1.85 46.99 0.93 23.62 1.74 44.20 0.87 22.10 0.51 12.95 0.26 6.60 0.08 2.03 25 Rear 1.85 46.99 0.93 23.62 1.67 42.42 0.84 21.34 0.45 11.43 0.23 5.84 0.13 3.30 Front 2.50 63.50 1.25 31.75 2.39 60.71 1.20 30.48 0.51 12.95 0.26 6.60 0.08 2.03 37 Dimensions Rear 2.50 63.50 1.25 31.75 2.33 59.18 1.16 29.46 0.45 11.43 0.23 5.84 0.13 3.30 Dimensions Front 2.41 61.21 1.20 30.48 2.30 58.42 1.15 29.21 0.62 15.75 0.31 6.60 0.08 2.03 Mounting Method 50 Rear 2.41 61.21 1.20 30.48 2.22 56.39 1.11 28.19 0.56 14.22 0.28 5.84 0.13 3.30 Mounting Front/Rear Method Shell Positions A B C D E F H Shell Dimensions Front/ Panel A B C D E F H Size in mm in mm in mm in mm in mm in mm in mm Size Positions Rear Panel in mm in mm in mm in mm in mm in mm in mm FrontFront Method 0.98 24.89 0.49 0.49 12.45 12.45 0.87 0.87 22.10 22.10 0.44 0.44 11.18 11.18 0.51 0.51 12.95 12.95 0.26 0.26 6.60 6.60 0.08 0.08 2.03 2.03 E 9 0.98 24.89 Mounting E 9HARDWARE: NEL MOUNTING alignment plug12.45 and 0.98 24.89 0.49 0.81 RearRear Aids 0.98in24.89 0.49 of 12.45 0.81 receptacle. 20.57 20.57 0.40 0.40 10.16 10.16 0.45 0.45 11.43 11.43 0.23 0.23 5.84 5.84 0.13 0.13 3.30 3.30 Shell Front/ A B C D E F H Front 1.31 33.27 0.66 16.76 1.10 27.94 0.60 15.24 0.51 12.95 0.26 6.60 0.08 2.03 Positions Rear Panel in mm in mm in mm in mm in mm in mm in mm Float Bushing A Size 15 A 15 1.31 33.27 0.51 RearFront 1.31 33.27 0.66 0.66 16.76 16.76 1.13 1.10 28.70 27.94 0.57 0.60 14.48 15.24 0.45Bushing 11.43 12.95 0.23 0.26 5.84 6.60 0.13 0.08 3.30 2.03 Float Front 0.98 0.44 0.51 12.95 0.26 6.60 0.08 2.03 Rear 1.31 24.89 33.27 0.49 0.66 12.45 16.76 0.87 1.13 22.10 28.70Reverse 0.57 11.18 14.48 0.45 11.43 0.23 5.84 0.13 3.30 E 9 Front 1.85 46.99 0.93 23.62 1.74 44.20 0.87 22.10 0.51 12.95 0.26 6.60 0.08 2.03 Rear 0.98 24.89 0.49 12.45 0.81 20.57 0.40 10.16 0.45 11.43 0.23 5.84 0.13 3.30 B 25 RearFront 1.85 46.99 0.93 0.93 23.62 23.62 1.67 1.74 42.42 44.20 0.84 0.87 21.34 22.10 0.45 0.51 11.43 12.95 0.23 0.26 5.84 6.60 0.13 0.08 3.30 2.03 B 25 1.85 33.27 46.99 Front 1.31 0.66 16.76 1.10 27.94 0.60 15.24 0.51 12.95 0.26 6.60 0.08 2.03 A 15 FrontRear 2.50 63.50 1.25 0.93 31.75 23.62 2.39 1.67 60.71 42.42 1.20 0.84 30.48 21.34 0.51 0.45 12.95 11.43 0.26 0.23 6.60 5.84 0.08 0.13 2.03 3.30 1.85 46.99 Rear 1.31 33.27 0.66 16.76 1.13 28.70 0.57 14.48 0.45 11.43 0.23 5.84 0.13 3.30 C 37 Rear 2.50 63.50 1.25 31.75 2.33 59.18 1.16 29.46 0.45 11.43 0.23 5.84 0.13 3.30 Front 1.85 46.99 0.93 23.62 1.74 44.20 0.87 22.10 0.51 12.95 0.26 6.60 0.08 2.03 CB 37 25 FrontFront 2.41 61.21 2.50 63.50 1.20 1.25 30.48 31.75 2.30 2.39 58.42 60.71 1.15 1.20 29.21 30.48 0.62 0.51 15.75 12.95 0.31 0.26 6.60 6.60 0.08 0.08 2.03 2.03 Rear 1.85 46.99 0.93 23.62 1.67 42.42 0.84 21.34 0.45 11.43 0.23 5.84 0.13 3.30 D 50 2.50 63.50 RearRear 2.41 61.21 1.20 1.25 30.48 31.75 2.22 2.33 56.39 59.18 1.11 1.16 28.19 29.46 0.56 0.45 14.22 11.43 0.28 0.23 5.84 5.84 0.13 0.13 3.30 3.30 Front 2.50 63.50 1.25 31.75 2.39 60.71 1.20 30.48 0.51 12.95 0.26 6.60 0.08 2.03 C 37 D 50 Front 2.41 63.50 61.21 1.25 1.20 31.75 30.48 2.33 2.30 59.18 58.42 1.16 1.15 29.46 29.21 0.62 15.75 0.31 6.60 0.08 2.03 Rear 2.50 0.45 11.43 0.23 5.84 0.13 3.30 Rear 2.41 61.21 61.21 1.20 1.20 30.48 30.48 2.30 2.22 58.42 56.39 1.15 1.11 29.21 28.19 0.56 14.22 0.28 5.84 0.13 3.30 Front 2.41 0.62 15.75 0.31 6.60 0.08 2.03 D 50 Rear 2.41 61.21 1.20 30.48 2.22 56.39 1.11 28.19 0.56 14.22 0.28 5.84 0.13 3.30 l 4 4 Rear panel mounting Front panel mounting PANEL MOUNTING HARDWARE: Aids in alignment of plug and receptacle. Float Bushing Reverse Float Bushing Dual Bushing PANELFloating MOUNTING HARDWARE: Aids in alignment of plug and receptacle. PANEL MOUNTING HARDWARE: Aids in alignment of plug and receptacle. 4-40 4-40 Clinch Clinch Nut Nut Reverse Float Bushing Float Bushing Bushing Rear panel mounting panel mounting Rear panel mounting Rear panelFront mounting Front and rear panel mounting Floating Dual Bushing Rear panel mounting Rear panel mounting Call Toll Free: 1 (800) 323-9612 Front panel mounting 4-6 4-40 Clinch Nut Floating Dual Bushing 4-40 Clinch Nut Rear panel mounting Front and rear panel mounting Call Toll Free: 1 Front (800)and 323-9612 rear panel mounting belfuse.com/cinch Rear panel mounting 4-6 5 Call Toll Free: 1 (800) 323-9612 4-6 D-subminiature Introduction Connectors Shells and Mounts Information D-SUBMINIATURE CONNECTORS INFORMATION INDUSTRIAL Introduction Shells and Mounts Two Holes .120 + .005 (3.05 + 0.13) Dia. Mating side Termination Side Termination Side Mating Side Shell Size Positions E 9 A E 15 9 Connector Type Plug Shell Connector Socket Size Positions Type A .015" (0.38mm) B .010" (0.25mm) B1 .005" (0.13mm) C .005" (0.13mm) D .010" (0.25mm) D1 .010" (0.25mm) E .010" (0.25mm) in in in in in in in mm mm A1.213 +.015" 30.81 B -+.010" -(0.38mm) 1.213 30.81 (0.25mm) .640 16.26 in mm in mm Plug Plug 1.213 1.541 30.81 39.14 1.541 -- -- 1.312 -- -- -- -- .329 .329 8.40 8.40.494 .494 12.55 0.984 33.32 24.99 12.55 1.312 12.55 0.984 33.32 24.99 .308 .3087.827.82 --- -- -- .494 .494 12.55 --- .994 25.30 1.534 39.00 1.312 33.32 12.55 1.852 47.04 -- -- -- --- .329 .329 8.40 8.40.494 .494 12.55 1.312 47.04 33.32 .308 .3087.827.82 --- -- -- .494 .494 12.55 1.852 12.55 Plug B 25 C 37 D D 50 50 -- 1.852 47.04 mm -- -- .329 8.40 .494 12.55 2.500 -- .308 -- 7.82 .329 --8.40 -- .494 .494 12.55 1.852 63.50 47.04 12.55 2.500 63.50 .308 7.82 --.494 12.55 2.500 63.50 ---.329 8.40 .494 12.55 Socket Plug 2.729 2.635 69.32 66.932.156-- 54.76-- Socket 2.635 2.500 61.11 63.50 12.55 2.406 -- .308 -- 7.82 .436 --11.07 ---.605 .494 15.37 2.406 61.11 61.11 .420 -- 10.67-15.37 2.406 -- .436-- 11.07 .605 .605 15.37 2.406 61.11 .420 10.67 --.605 15.37 Plug Socket 2.635 2.635 66.93 66.93 9 Connector Type Plug Socket 66.93 --2.062 2.062 -2.079 --52.34 2.079 -- 52.34 -- --52.80 52.80 --- G .010" (0.25mm) H .010" (0.25mm) J .010" (0.25mm) K .005" (0.25mm) L .010" (0.25mm) M .010" (0.25mm) in mm in in in in in .759 19.28 mm .422 10.72 .422 10.72 H +.010" Shell Connector A 15 Plug Size Positions Type Socket E 9 Plug B 25 Plug Socket Socket A 15 Plug C 37 Plug Socket Socket B 25 Plug .759 19.28 G +.010" (0.25mm) 1.083 27.51 in 1.083 mm27.51 .759 19.28 .759 1.625 19.2841.27 1.625 41.27 1.083 27.51 1.083 2.272 27.5157.71 1.625 2.272 41.2757.71 (0.25mm) .422 10.72 in mm .422 10.72 .422 10.72 .422 10.72 10.72 .422 .422 10.72 .422 10.72 .422 10.72 10.72 .422 .422 10.72 10.72 .422 Socket Plug Plug Socket Socket Plug Socket 1.625 2.178 41.2755.32 2.272 2.178 57.7155.32 2.272 57.71 2.178 55.32 2.178 55.32 .422 .534 .422 .534 .422 .534 .534 50 39.00 in 2.182 ---55.40 Socket 2.729 69.32 2.156 54.76 --Plug 2.729 69.32 ---2.182 55.40 E D -- mm 2.088 2.729 53.04 69.321.508-- 38.30-- Positions 50 37 -- -- in D +.010" 8.40 1 +.010".494 E12.55 (0.25mm) -.494 (0.25mm) 12.55 in mm in mm Plug Socket Shell Size D C mm ---- Socket 39.14 53.04 .968 ---Socket 1.541 2.088 1.50824.59 38.30 Plug 2.088 53.04 --1.534 37 mm .994 16.90 25.30 .666 in D +.010" --.329 .308 (0.25mm) 7.82 -- mm -- -- 15 C 39.14 2.088 53.04 -- -- mm 0.984C +.005" 24.99 (0.13mm) 0.984 24.99 Socket 1.213 1.541 .968 16.26 24.59 Socket 30.81 39.14 .640 Plug mm B1 +.005" .666 16.90 (0.13 -- mm)-- A B 25 mm 10.72 13.56 10.72 13.56 10.72 13.56 13.56 mm 0.30 0.76 0.30 0.76 J +.010" (0.25 0.30 in 0.30 .030 0.39 .030 0.30 .030 0.39 .030 0.30 .039 .030 .039 .039 .030 .030 .039 .030 mm) 0.76 mm 0.76 0.76 0.99 0.76 0.76 0.76 0.99 0.76 0.76 0.99 0.76 0.99 0.99 0.76 0.76 0.99 0.76 mm mm .236 .243 5.99 0.45 K6.17 +.005" 0.45 .236 (0.25mm) 5.99 .045 .236 in 6.17 mm.045 .236 5.99 .231 .2435.87 6.17 .060 .243 6.17 .045 .236 5.99 .231 .2535.87 6.17 .060 .243 .2316.17 5.87 .045 1.14 .422 1.14L +.010" .429 (0.25mm) 1.14 .422 in mm 1.14 .429 .045 1.14 1.52 .426 .045 1.14 1.14 .429 .045 1.14 1.52 .426 .045 1.14 1.14 .429 .060 1.52 .231 .2435.87 6.17 .060 .243 .2316.17 5.87 .045 .243 6.17 .231 5.87 .243 6.17 .045 1.52 .060 1.14 .045 .060 .045 1.14 .426 1.52 .429 1.14 1.52 1.14 mm 10.72 10.92M +.010" 10.72(0.25mm) in mm 10.92 .422 10.72 10.82 .429 10.92 10.92 .422 10.72 10.82 .429 10.92 10.92 .426 10.82 .429 10.92 10.82 .426 10.82 10.92 .429 10.92 .426 10.82 .429 10.92 B and D are outside dimensions for socket. D and B are inside dimensions for plug. 4-7 6 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Introduction Connectors Printed Circuit Board D-SUBMINIATURE CONNECTORS INFORMATION Information Layout Hole Dimensions INDUSTRIAL Introduction Printed Circuit Board Layout Hole Dimensions Standard Density D-subminiature Standard Density D-subminiature Mounting Dimensions Board Layouts Footprints (Component side shown) Mounting Dimensions Board Layouts Footprints (Component side shown) 99 Position Position Shell Shell Size SizeE E 25X 4 25 Position 25 Position Shell Shell Size SizeB B PC Board Lead Hole Size Terminal in Dia. Hole Dia. mm in mm .040 1.02 .055 1.40 .030 0.76 .045 1.14 0.61-0.64 .039 0.99 15X 15 Position 15 Position Shell Size A Shell Size A .024-.025 The footprints on this page are standard for all metal shell D-subminiature connectors. PC Board Lead Hole Size footprints D-subminiature on this page are standard for all metal On all The right-angle connectors, the short row of contacts is positioned closest to the edge shell D-subminiature connectors. of the board. Terminal Dia. Hole in mm .040 1.02 .030 0.76 .024-.025 0.61-0.64 On all right-angle D-subminiature connectors, the short row of contacts is positioned closest to the edge of the board. Call Toll Free: 1 (800) 323-9612 Dia. in .055 .045 .039 mm 1.40 1.14 0.99 belfuse.com/cinch 7 4-8 D-subminiature Introduction D-SUBMINIATURE CONNECTORS INFORMATION INDUSTRIAL Connectors Printed Circuit Board Introduction Printed Circuit Board Layout Hole Dimensions Information Layout Hole Dimensions Standard Density D-subminiature Density D-subminiature MountingStandard Dimensions Board Layouts Mounting Dimensions Board Layouts Footprints (Component side shown) Footprints (Component side shown) 37 Position 50 Position 50 Position Shell Size D 37 Position Shell Size C Shell Size C Shell Size D PC Board Lead Hole Size The footprints on this page are standard for all metal shell D-subminiature connectors. On all right-angle D-subminiature connectors, the short row Terminal in Dia. Hole Dia. mm in mm .040 1.02 .055 1.40 0.76 .045 1.14 0.61-0.64 .039 0.99 .030 PC Board Lead Hole Size The footprints on this page are standard for all metal of contacts is positioned closest to the edge of the board. .024-.025 shell D-subminiature connectors. Terminal Dia. Hole in mm .040 1.02 .030 0.76 .024-.025 0.61-0.64 On all right-angle D-subminiature connectors, the short row of contacts is positioned closest to the edge of the board. 8 4-9 Dia. in .055 .045 .039 mm 1.40 1.14 0.99 Call Toll Free: 1 (800) 323-9612 FEATURES Available with gold flash or 30in. gold plating. Offered with .120 mounting holes, optional 4-40 clinch nuts, or dual float bushings (except rightD-subminiature Metal Shell holes only). angle PCB connectors-mounting Approvals: Crimp and Poke, Right-Angle and Vertical PCB D-SUBMINIATURE METAL SHELL CRIMP AND POKE D*U * UL Recognized - Files E170218 (UL1977) and E130965 (UL1863). Series * CSA Approved - File LR31996. INDUSTRIAL Features See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors Offered in 9, 15, 25, 37, and 50 position plugs and sockets 9 , 15, and 25 positions). FEATURES M ATERIALS Available withGlass-filled gold flash or plating. 30in. Available with gold flash or 30in. gold Insulator Material: nylon (black),gold UL 94plating. V-O rated Offered with Steel .120 with mounting holes, 4-40 clinch nuts, or dual float bushings (except rightConnector Shell: zinc plating andoptional yellow chromate Offered with 0.120 mounting and optional 4-40 clinch nuts. finish orholes tin plating (grounding indents angle PCB connectors-mounting holes only). Approvals: Approvals: on plug) 4-40 Clinch Nut: Steel with cadmium plating and yellow * UL Recognized - Fileschromate E170218 (UL1977) and E130965 (UL1863). * UL Recognized - Files E170218 (UL1977) and E130965 (UL1863). finish * CSA Approved File LR31996. * CSA Approved File LR31996. Dual Float Bushing: Stainless steel, passivated See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications. mounting specifications. ENVIRONMENTAL MATERIALS Operating Temperature: -65C to + 125C Shock: 50G peak per MIL-STD-202, Method 213, Condition G Materials Vibration: 12 cycles in three perpendicular directions @ Insulator Material: Glass-filled nylon (black), UL 94rated V-O rated 10-2000Hz, per MIL-STD-202, Method Insulator Material Glass-filled nylon (black), UL 94 V-O204, D with zinc plating and yellow chromate Connector Condition Shell: Steel Connector Shell Steel with zinc plating and yellow chromate finish or clear for RoHS finish90-95% or tin plating (grounding indents Moisture Resistance: relative humidity @ 40C for or tin plating (grounding indents on plug) on plug) 96 hours per MIL-STD-202, Method 103 4-40 Clinch Nut Steel with cadmium plating and yellow chromate finish 4-40 Clinch Nut: Steel with cadmium plating and yellow Dual Float Bushing Stainless steel, passivated chromate finish Dual Float Bushing: Stainless steel, passivated Withstanding Voltage: Minimum 1000V RMS @ sea level ELECTRICAL MECHANICAL ENVIRONMENTAL ELECTRICAL EnvironmentalCurrent Rating: 5 Amps Operating Temperature -65C to +105C Contact Resistance: 2.7 milliohms maximum -65C to + 125C Method 213, Condition G Shock Operating Temperature: 50G peak per MIL-STD-202, Insulation Resistance: 5000 megohms maximum Shock: 50G peak per MIL-STD-202, Method 213, Condition G 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL(initial); 1000 megohms (minimum) Vibration: 12 cycles in threeMethod perpendicular directions @ STD-202, 204, Condition D 10-2000Hz, per MIL-STD-202, Method 204, after environmental testing Moisture Resistance Condition 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, D Method 103 Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 Vibration Electrical Individual Insertion1000V and RMS @ sea level Withstanding VoltageContact Minimum Withstanding Voltage: Minimum 1000V RMS @ seaoz. level Separation Force (minimum/maximum): 0.7 oz./12 Current Rating 5 Amps Current Rating: 5 Amps Durability: 500 mating cycles Contact Resistance 2.7 milliohms maximum Contact Resistance: 2.7 milliohms maximum Insulation Resistance 5000 megohms minimum (initial); 1000 megohms (minimum) after environmental testing Insulation Resistance: 5000 megohms maximum (initial); 1000 megohms (minimum) Mechanical after environmental testing TollInsertion Free: 1 (800) 4-26 Individual Call Contact 0.7 oz.323-9612 minimum/12oz. maximum and Separation Force MECHANICAL Durability 500 mating cycles Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles belfuse.com/cinch Call Toll Free: 1 (800) 323-9612 4-26 9 D-SUBMINIATURE METAL SHELL CRIMP AND POKE D*U SERIES INDUSTRIAL Machined contacts supplied loose with connector or can be ordered separately. Use with 20-24 AWG wire. Materials Contact Material Plug - Brass (stamped) or copper alloy (machined). Socket - Phosphor bronze (stamped) copper alloy (machined). Contact Plating Machined Plugs and Sockets: Golf flash or 30in. gold. All over nickel Termination Tooling Contact Insertion/Extraction: #CIET-20-HDB. See page 51. Loose Contact Crimp Tool: Machined Contact - #M22520/2-01. See page 51. For Positioner as required - EP-580. See page 51. 10 D-SUBMINIATURE METAL D*U SERIES D-subminiature Metal Shell Crimp and Poke SHELL CRIMP D*U Series AND POKE, INDUSTRIAL Ordering Information D*U Crimp and Poke Plugs Zinc-Plated Shell with Chromate FInish Ordering Information Yellow Chromate Mounting Holes Positions D*U Crimp and Poke PlugsRoHS Compliant with Clear Chromate 4-40 Clinch Nuts Mounting Holes 4-40 Clinch Nuts Zinc-Plated Shell with Yellow Chromate Finish Contacts Included Without Contacts Contacts Included 9 DEU-9P DEU-9P-FO DEUE-9P 9 DEU-9P DEUE-9P-FO DEUY-9P DEUE-9P-FO DEUH-9PDEU-9P-FO DEUH-9P-FODEUE-9-P DEUEH-9P DEUEH-9P-FO 15 DAU-15P DAU-15P-FO DAUE-15P 25 DBU-25P DBU-25P-FO DBUE-25-P DBUE-25P-FO DBUY-25P DAUE-15-P-FO DAUH-15P DAUH-15P-FO DAUEH-15P DAUEH-15P-FO 25 DBU-25P DBU-25P-FO DBUE-25P 50 DDU-50P DDU-50P-FO DDUE-50-P DDUE-50P-FO DDUY-50P DBUE-25P-FO DBUH-25P DBUH-25P-FO DBUEH-25P DBUEH-25P-FO 37 DCU-37P DCU-37P-FO DCUE-37P DCUE-37P-FO DDU-50P-FO Mounting Holes 4-40 Clinch Nuts DDUEH-50P-FODual Float DDUE-50P DDUE-50P-FO DDUH-50P DDUH-50P-FO DDUEH-50P Contacts Without Contacts Without Contacts Position Included Contacts Included Contacts Included 9 DEU-9PTI DEU-9PTI-FO DEUE-9PTI DEUE-9PTI-FO DEUY-9PTI 15 DAU-15PTI DAU-15PTI-FO DAUE-15PTI DAUE-15PTI-FO DAUY-15PTI 25 DBU-25PTI DBU-25PTI-FO DBUE-25PTI DBUE-25PTI-FO DBUY-25PTI 4-40 Clinch Nuts 37 DCU-37PTI DCU-37PTI-FO DCUE-37PTI DCUE-37PTI-FO DCUY-37PTI 50 DDU-50PTI DDU-50PTI-FO DDUE-50PTI DDUE-50PTI-FO DDUY-50PTI 50 DDU-50P Without Contacts Mounting Holes Without 4-40 Clinch Nuts Dual Float Bushi Contacts Contacts Without Contacts Wit Included Without Contacts Contacts IncludedWithout ContactsContacts Position Included Contacts Included 15 DAU-15P DAU-15P-FO DAUE-15-P DAUE-15-P-FO DAUY-15P 37 DCU-37P DCU-37P-FO DCUE-37-P DCUE-37P-FO DCUY-37P DCUH-37P DCUH-37P-FO Tin-Plated Shell with Grounding Indents Contacts DCUEH-37P Included DCUEH-37P-FO 4 Tin-Plated Shell with Grounding Indents Mounting Holes Positions Contacts Included Without Contacts Contacts Included Without Contacts 9 DEU-9PTI DEU-9PTI-FO DEUE-9-PTI DEUE-9PTI-FO 15 DAU-15PTI DAU-15PTI-FO DAUE-15-PTI 25 DBU-25PTI DBU-25PTI-FO DBUE-25-PTI 37 DCU-37PTI DCU-37PTI-FO DCUE-37-PTI 50 DDU-50PTI DDU-50PTI-FO DDUE-50-PTI D*U Crimp and Poke Sockets Mounting Holes Positions Contacts Included Without Contacts Zinc-Plated Shell with Yellow Chromate Finish DAUE-15PTI-FO Mounting Holes Without Position Included Contacts DCUE-37PTI-FO 9 DEU-9S DEU-9S-FO 15 DAU-15S DAU-15S-FO DDUE-50PTI-FO 25 DBU-25S DBU-25S-FO 37 DCU-37S DCU-37S-FO 50 DDU-50S DDU-50S-FO 4-40 Clinch Nuts Contacts Without Included Contacts DEUE-9S DEUE-9S-FO DAUE-15S DAUE-15S-FO DBUE-25S DBUE-25S-FO DCUE-37S DCUE-37S-FO DDUE-50S DDUE-50S-FO Dual Float Contacts Included DEUY-9S DAUY-15S DBUY-25S DCUY-37S DDUY-50S Bushi Wit Con DEUY DAUY DBUY DCU DDU Mounting Holes 4-40 Clinch Nuts Dual Float Contacts Mounting Without Contacts Holes 4-40Without Clinch Nuts Contacts Position Included Contacts Included Contacts Included 9 DEU-9ST DEUE-9ST-FO Without ContactsDEU-9ST-FO Without DEUE-9ST Contacts WithoutDEUY-9ST 15 DAU-15ST DAUE-15ST-FO Contacts IncludedDAU-15ST-FO Contacts DAUE-15ST Included ContactsDAUY-15ST 25 DBU-25ST DBU-25ST-FO DBUE-25ST DBUE-25ST-FO DBUY-25ST 37 DCU-37ST DCUE-37ST-FO DCUY-37ST DEUE-9S-FO DEUH-9SDCU-37ST-FO DEUH-9S-FODCUE-37ST DEUEH-9S DEUEH-9S-FO 50 DDU-50ST DDU-50ST-FO DDUE-50ST DDUE-50ST-FO DDUY-50ST Bushi Wit Con DEUY DAUY DBUY DCU DDU DBUE-25PTI-FO Contacts RoHS Compliant 4-40 Clinch Nuts Contacts Included 9 DEU-9S DEU-9S-FO DEUE-9S 15 DAU-15S DAU-15S-FO DAUE-15S DAUE-15S-FO DAUH-15S DAUH-15S-FO DAUEH-15S DAUEH-15S-FO 25 DBU-25S DBU-25S-FO DBUE-25S DBUE-25S-FO DBUH-25S DBUH-25S-FO DBUEH-25S DBUEH-25S-FO 37 DCU-37S DCU-37S-FO DCUE-37S DCUE-37S-FO DCUH-37S DCUH-37S-FO DCUEH-37S DCUEH-37S-FO 50 DDU-50S DDU-50S-FO DDUE-50S DDUE-50S-FO DDUH-50S DDUH-50S-FO DDUEH-50S DDUEH-50S-FO Call Toll Free: 1 (800) 323-9612 4-28 Tin-Plated Shell Mounting Holes Positions Contacts Included Without Contacts 4-40 Clinch Nuts Contacts Included Bushi Wit Con DEUY DAUY DBUY DCU DDU D*U Crimp and Poke Sockets Tin-Plated Shell Yellow Chromate Con DEUY DAUY DBUY DCU DDU Without Contacts 9 DEU-9ST DEU-9ST-FO DEUE-9ST DEUE-9ST-FO 15 DAU-15ST DAU-15ST-FO DAUE-15ST DAUE-15ST-FO 25 DBU-25ST DBU-25ST-FO DBUE-25ST DBUE-25ST-FO 37 DCU-37ST DCU-37ST-FO DCUE-37ST DCUE-37ST-FO 50 DDU-50ST DDU-50ST-FO DDUE-50ST DDUE-50ST-FO 11 belfuse.com/cinch D-subminiature Metal Shell D-SUBMINIATURE METAL SHELL CRIMP AND POKE Crimp and Poke Contacts D*U Series CONTACTS D*U SERIES INDUSTRIAL Machined Contacts * *20-24 Wire Machined Contacts 20-24 AWG AWG Wire Plug Plug Socket Socket Dimensions Dimensions Wire A Wirein Description AWG Pin #20, 22, 24 .066 Pin #20, 22, 24 SocketSocket #20, 22, #20, 24 22, .066 24 Description AWG A mm 1.67 in in B mm .045mm 1.14 .066 1.67 1.67.066 .0451.67 1.14 in CB Max. in .537 .045 .523 .045 mm mm 13.64 1.14 13.28 1.14 C Max. in .537 .523 mm 13.64 13.28 Ordering Information Ordering Information D*U Series Loose-Piece Machined Contacts D*U Series Loose-Piece Machined Contacts Pin Gold Flash 30in. Gold 30in. Gold Gold Flash Pin 030-1952-000 030-1952-000 030-1952-030030-1952-030 Socket 030-1953-000 030-1953-030 Socket 030-1953-000 4 030-1953-030 Stamped Contacts * 20-28 AWG Wire Plug Socket Ordering Information D*U Series Stamped Contacts on 10K Reels Pin Socket Gold Flash BCL-1964-20P BCL-1963-20S 30in. Gold D110238-034 D110238-035 12 4-29 Call Toll Free: 1 (800) 323-9612 MATERIALS Insulator Material: Glass-filled polyester (black), UL 94 V-O rated Connector Shell: Steel with zinc plating and yellow chromate finish or tin plating (grounding indents on plug) Contact Material: Phosphor bronze (stamped) Contact Plating: Gold flash or 30in. gold in mating area and gold flash on the remainder. All over nickel. D-SUBMINIATURE ALL PLASTIC IDC T* SERIES INDUSTRIAL Features ENVIRONMENTAL Offered in 9, 15, 25, and 37 position plugs and sockets. Operating Temperature: -65C to + 125C IDC (insulation displacement) terminations for discrete wire. G Shock: 50G peak per MIL-STD-202, Method 213, Condition Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per Offered with .120MIL-STD-202, mounting holes. Method 204, Condition D Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 * UL Recognized - Files E170218 (UL1977) and E130965 (UL1863). Approvals: ELECTRICAL * CSA Approved - File LR31996. Withstanding Voltage: Minimum 1000V RMS @ sea level Rating: 3 Amps contact arrangements, and panel mounting specifications. See pages 5-6 Current for standard dimensions, Contact Resistance: 2.7 milliohms maximum Materials Insulation Resistance: Contact Material Phosphor bronze (stamped) Contact Plating Gold flash or 30in. gold in mating area and gold flash on the remainder. All over nickel. MECHANICAL Insulator Material 5000 megohms maximum (initial); 1000 megohms (minimum) after Glass-filled polyester (black), UL 94 V-O rated environmental testing Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Environmental OperatingDurability: Temperature500 mating -65Ccycles to +125C Shock 50G peak per MIL-STD-202, Method 213, Condition G Vibration 12 cycles in three perpendicular directions @ 10-2000Hz, per MILSTD-202, Method 204, Condition D Moisture Resistance 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Call Toll Free: 1 (800) 323-9612 4-34 Method 103 Electrical Withstanding Voltage Minimum 1000V RMS @ sea level Current Rating 3 Amps Contact Resistance 2.7 milliohms maximum Insulation Resistance 5000 megohms minimum (initial); 1000 megohms (minimum) after environmental testing Mechanical Individual Contact Insertion and Separation Force 0.7 oz. minimum/12oz. maximum Durability 500 mating cycles belfuse.com/cinch 13 * * * * Auto-Clinch D Semi-Automatic Termination Tool #ACD-432: See page 4-100. Certi-Clinch D Manual Termination Tool #SD-CCWN: For 24-26 AWG wire: See page 4-100. Uni-Clinch D Single-Wire Hand Insertion Tool #SD-UC: See page 4-100. Super D Manual Stay Band Tool #SD-MSBT: See page 4-100. * Optional strain relief covers for connectors when backshell is not required. D-SUBMINIATURE METAL SHELL IDC FOR DISCRETE CABLE WIRE T* SERIES INDUSTRIAL Optional strain relief covers for connectors when backshell is not required. Ordering Information Ordering Information Positions Positions Catalog No. 9 9 1515 2525 3737 Catalog No. SSD-WC9 SSD-WC9 SSD-WC15 SSD-WC15 SSD-WC25 SSD-WC25 SSD-WC37 SSD-WC37 * One-piece cover for 9 contact size. Order one per connector. Two-piece cover for other sizes. Order two per connector. *Cover fits both plug for and9socket. One-piece cover contact size. Order one per connector. Two-piece cover for other sizes. Order two per connector. Cover fits both plug and socket. 4-37 14 Call Toll Free: 1 (800) 323-9612 4 D-subminiature All-Plastic IDC for Discrete Cable Wire T* Series D-SUBMINIATURE ALL-PLASTIC IDC FOR DISCRETE INDUSTRIAL CABLE WIRE T* SERIES * * For * * For use only with SDH Series Gray Backshell on pages 4-89 thru 4-90. Offered in 9, 15, 25, and 37 position plugs and sockets. use only with Series Gray Backshell on page 41. Connector will SDH accommodate 24-28 AWG wire. Offered with plain flanges and .120 mounting holes, threaded bushings, latch blocks, or latch blocks and threaded bushings. Offered in 9, 15, 25, and 37 position plugs and sockets. Connector will accommodate 24-28 AWG wire. Offered with plain flanges with 0.120 mounting holes. * * * * Auto-Clinch D Semi-Automatic Termination Tool #ACD-432: See page 4-100. Certi-Clinch D Manual Termination Tool #SD-CC for 24-28 AWG wire: See page 4-100. Uni-Clinch D Single-Wire Hand Insertion Tool #SD-UC: See page 4-100. Super D Manual Stay Band Tool #SD-MSBT: See page 4-100. Uni-Clinch D Single-Wire Hand Insertion Tool #SD-UC: See page 50. Super D Manual Stay Band Tool #SD-MSBT: See page 50. 4 Plug with Latching Blocks Dimensions A Positions Socket with Latching Blocks A B in mm in mm 9 1.209 30.71 1.309 15 1.536 39.01 1.636 25 2.079 52.81 37 2.724 69.19 CP CS D in mm in mm in mm in mm 33.25 .984 24.99 .668 16.96 .642 16.31 .592 15.04 41.55 1.312 33.32 .995 25.28 .970 24.64 .918 23.31 2.179 55.35 1.852 47.04 1.535 38.99 1.512 38.40 1.462 37.13 2.824 71.73 2.500 63.50 2.183 55.45 2.158 54.81 2.114 53.70 Ordering Information IDC All-Plastic Sockets IDCDimensions All-Plastic Plugs Plain Flange A A Positions in mm in mm Mounting Holes 9 1.209 30.71 1.309 33.25 Compliant 15 1.536 39.01RoHS 1.636 41.55 25 2.079 52.81 2.179 55.35 Positions Gold Flash Gold Flash 37 2.724 69.19 2.824 71.73 9 TE-9P TEH9P 15 TA-15P TAH15P 25 TB-25P BPlain Flange CP CS D in mm in mm in mm in mm Mounting Holes .984 24.99 .668 16.96 .642 16.31 .592 15.04 RoHS 1.312 33.32 .995 25.28 .970 Compliant 24.64 .918 23.31 1.852 Positions 47.04 1.535 38.99 1.512 38.40 1.462 37.13 Gold Flash Gold Flash 2.500 63.50 2.183 55.45 2.158 54.81 2.114 53.70 9 TE-9S TEH9S 15 TA-15S TAH15S 25 TB-25S Call Toll Free: 1 (800) 323-9612 4-38 15 belfuse.com/cinch D-SUBMINIATURE METAL SHELL SOLDER CUP, D-subminiature MetalAND ShellWIRE WRAP VERTICAL PCB MOUNT, Solder Cup, Vertical PCB Mount, and Wire Wrap BASIC D SERIES INDUSTRIAL Basic D Series Features FEATURES Offered in Wire Wrap and Cup styles for wire termination vertical style forand PCBvertical mount.style for Offered in Solder Wire Wrap and Solder Cup styles forand wire termination PCB mount. Offered with 0.120 mounting holes or 4-40 clinch nuts. Offered with .120 mounting holes, 4-40 clinch nuts, and dual float bushings. Offered in 9,15,Offered 25, 37, in and plugs50and sockets. 9, 50 15,position 25, 37, and position plugs and sockets. Available with gold flash or 30in. gold plating. Gold flash contacts. Approvals: Approvals: * UL Recognized - Files E170218 (UL1977) and E130965 (UL1863). * UL Recognized - FilesApproved E170218 (UL1977) and E130965 (UL1863). * CSA - File LR31996. * CSA Approved - File LR31996. See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications. Materials Insulator Material: Glass-filled UL 94V-O rated Insulator Material Glass-filled polyester polyester (white), UL (white), 94 V-O rated MATERIALS Connector ShellConnector Shell: Steel with zinc plating yellow chromate RoHS clear Steel with zincand plating and yellowfinish, chromate chromate or tin (grounding indentsindents on plug)on plug) finish or plating tin plating (grounding 4-40 Clinch Nut 4-40 Clinch Nut: Steel with cadmium plating andplating yellow chromate finish Steel with cadmium and yellow chromate finish Stainless Steel, passivated Dual Float Bushing Dual Float Bushing: Stainless steel, passivated Environmental Shock ENVIRONMENTAL Operating Temperature Vibration -65C to +125C Operating Temperature: -65C to + 125C 50G peak per MIL-STD-202, Method 213, Condition G Shock: 50G peak per MIL-STD-202, Method 213, Condition G 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL- Vibration: 12STD-202, cycles in three 204, perpendicular Method Condition Ddirections @ 10-2000Hz, per MIL-STD-202, Method 204, Moisture Resistance 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Condition D Electrical Method 103 Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 Withstanding Voltage ELECTRICAL Current Rating Minimum 1250V RMS @ sea level 5 Amps Withstanding Voltage: Contact Resistance Minimum 1250V RMS @ sea level 2.7 milliohms Current Rating:maximum 5 Amps Insulation ResistanceContact5000 megohms maximum (initial); 1000 megohms (minimum) after Resistance: 2.7 milliohms maximum environmental testing Insulation Resistance: Mechanical 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing 0.7 oz. minimum/12oz. maximum Durability 500 mating cycles MECHANICAL Individual Contact Insertion and Separation Force Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles 16 * Will accommodate up to 20 AWG wire. Materials * Contact Material: Copper Alloy D-SUBMINIATURE METAL SHELL SOLDER CUP INDUSTRIAL * Contact Plating: BASIC D SERIES - Stamped contacts with gold flash or 30in. gold in mating area, gold flash or tin/lea - Stamped contacts. Screw machine contacts with gold flash or 30in. gold. All over nickel. .312 (7.92) Will accommodate up to 20 AWG wire. Materials Contact Material Copper Alloy Contact Plating Stamped contacts with gold flash in mating area, gold flash on remainder. All over nickel. .200 (5.08) REF. Ordering Information Ordering Information Solder Cup Plugs Solder Cup Plugs Zinc-Plated Shell with Yellow Chromate Finish Stamped Contact with Gold Flash in Solder Cup Mounting Holes 4-40 Clinch Nuts Zinc-Plated Shell with Chromate FinishPositions Gold Flash 30in. Gold Gold Flash 30in. Gold 9 DE-9P DE-9P-30 DEE-9P DEE-9P-30 DA-15P DA-15P-30 DAE-15P DAE-15P-30 Stamped Contact with Gold Flash in Solder15 Cup 25 DB-25P DB-25P-30 DBE-25P DBE-25P-30 Yellow Chromate RoHS Compliant Chromate 37 with Clear DC-37P DC-37P-30 DCE-37P DCE-37P-30 50 DD-50P DD-50P-30 DDE-50P DDE-50P-30 Mounting Mounting Holes 4-40 Clinch Holes Positions Nuts Stamped Contact with Tin/Lead in Solder Cup Gold Flash Gold Flash Gold Flash Gold Flash 9 DE-9P DEE-9P 15 DA-15P DAE-15P 25 DB-25P DBE-25P DBH-25P 15 37 DC-37P DCE-37P DCH-37P 37 50 DD-50P DDE-50P DEH-9P Positions DAH-15P 9 25 DDH-50P 50 Mounting Holes DEEH-9P Gold Flash 30in. Gold DAEH-15P DE-9P-II DE-9P-II-30 DA-15P-II DA-15P-II-30 DBEH-25P DB-25P-II DB-25P-II-30 DCEH-37P DC-37P-II DC-37P-II-30 DD-50P-II DD-50P-II-30 DDEH-50P Screw Machine Contact Mounting Holes Tin-Plated Shell with Ground Indents Positions Gold Flash 30in. Gold 9 DE-9P-SM DE-9P-SM-30 Stamped Contact with Gold Flash in Solder Cup 15 DA-15P-SM DA-15P-SM-30 DB-25P-SM DB-25P-SM-30 Mounting 4-40 Clinch Dual Float 25 37 DC-37P-SM DC-37P-SM-30 Holes Nuts Bushings 50 DD-50P-SM DD-50P-SM-30 Positions 9 Gold Flash Gold Flash Gold Flash DE-9PTI DEE-9PTI DEY-9PTI 15 DA-15PTI DAE-15PTI DAY-15PTI 25 DB-25PTI DBE-25PTI DBY-25PTI 37 DC-37PTI DCE-37PTI DCY-37PTI 50 DD-50PTI DDE-50PTI DDY-50PTI 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9P-II DEE-9P-II-30 DAE-15P-II DAE-15P-II-30 DBE-25P-II DBE-25P-II-30 DCE-37P-II DCE-37P-II-30 DDE-50P-II DDE-50P-II-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9P-SM DEE-9P-SM-30 DAE-15P-SM DAE-15P-SM-30 DBE-25P-SM DBE-25P-SM-30 DCE-37P-SM DCE-37P-SM-30 DDE-50P-SM DDE-50P-SM-30 4-41 belfuse.com/cinch 17 Call T D-SUBMINIATURE METAL SHELL SOLDER CUP BASIC D SERIES Ordering Information Solder Cup Sockets Zinc-Plated Shell with Chromate Finish Stamped Contact with Gold Flash in Solder Cup Yellow Chromate Positions RoHS Compliant with Clear Chromate Mounting Holes 4-40 Clinch Nuts Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash Gold Flash Gold Flash 9 DE-9S DEE-9S DEH-9S DEEH-9S 15 DA-15S DAE-15S DAH-15S DAEH-15S 25 DB-25S DBE-25S DBH-25S DBEH-25S 37 DC-37S DCE-37S DCH-37S DCEH-37S 50 DD-50S DDE-50S DDH-50S DDEH-50S Tin-Plated Shell Stamped Contact with Gold Flash in Solder Cup Positions Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash 9 DE-9ST DEE-9ST 15 DA-15ST DAE-15ST 25 DB-25ST DBE-25ST 37 DC-37ST DCE-37ST 50 DD-50ST DDE-50ST 18 INDUSTRIAL Basic D Series * .040" contact diameter. * Short rear insulator providesDIP low profile on PCB. D-SUBMINIATURE METAL SHELL VERTICAL INDUSTRIAL * Offered with .120 mounting holes, dual float bushings, or optional 4-40 clinch nuts. SOLDER PCB BASIC D SERIES Materials .040" contact diameter. * Contact Material: Socket - Phosphor bronze (machined), Plug - Brass (machined). * Contact Plating: Gold flash or 30in. gold over nickel. Short rear insulator provides low profile on PCB. .130 (3.30) .104 (2.64) Offered with .120 mounting holes, dual float bushings, or optional 4-40 clinch nuts. Materials Contact Material Socket - Phosphor bronze (machined). Plug - Brass (machined). Contact Plating Gold flash or 30in. gold. All over nickel. .042 (1.07) .038 (0.97) .200 (5.08) REF. Ordering Information Vertical PCB Plugs Ordering Information Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes 4-40 Clinch Nuts Positions Gold Flash 30in. Gold Gold Flash 30in. Gold Vertical PCB Plugs Vertical PCB Sockets 9 DE-9PV DE-9PV-30 DEE-9PV DEE-9PV-30 15 DA-15PV DA-15PV-30 DAE-15PV DAE-15PV-30 25 DB-25PV DB-25PV-30 DBE-25PV DBE-25PV-30 Zinc-Plated Shell with Yellow Chromate Finish Zinc-Plated Shell with Yellow Chromate Finish 37 DC-37PV DC-37PV-30 DCE-37PV DCE-37PV-30 50 DD-50PV DD-50PV-30 DDE-50PV DDE-50PV-30 Mounting 4-40 Clinch Mounting 4-40 Clinch Holes Nuts Gold Flash Gold Flash 9 DE-9PV DEE-9PV 15 DA-15PV DAE-15PV 25 DB-25PV DBE-25PV 37 DC-37PV DCE-37PV 50 DD-50PV DDE-50PV Positions 4 Tin-Plated Shell with GroundingHoles Indents Mounting Holes Positions Gold Flash Positions Gold Flash 30in. Gold 9 DE-9SV 9 DE-9PVTI DE-9PVTI-30 15 DA-15SV 15 DA-15PVTI DA-15PVTI-30 25 DB-25SV 25 DB-25PVTI DB-25PVTI-30 37 DC-37PVTI DC-37PVTI-30 37 DC-37SV 50 DD-50PVTI DD-50PVTI-30 50 DD-50SV Nuts 4-40 Clinch Nuts Gold Flash Gold Flash DEE-9PVTI DAE-15SV DAE-15PVTI DBE-25SV DBE-25PVTI DCE-37PVTI DCE-37SV DDE-50PVTI DDE-50SV DEE-9SV 30in. Gold DEE-9PVTI-30 DAE-15PVTI-30 DBE-25PVTI-30 DCE-37PVTI-30 DDE-50PVTI-30 Vertical PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes 4-40 Clinch Nuts Tin-Plated Shell with Grounding Indents Tin-Plated Shell Positions Gold Flash 30in. Gold Gold Flash 30in. Gold 9 DE-9SV DE-9SV-30 DEE-9SV DEE-9SV-30 Mounting 4-40 Clinch Mounting 4-40 Clinch 15 DA-15SV DA-15SV-30 DAE-15SV DAE-15SV-30 Holes Nuts Holes Nuts 25 DB-25SV DB-25SV-30 DBE-25SV DBE-25SV-30 Positions Gold Flash Gold Flash Positions Gold Flash Gold Flash 37 DC-37SV DC-37SV-30 DCE-37SV DCE-37SV-30 9 DE-9PVTI DEE-9PVTI 9 DE-9SVT DEE-9SVT 50 DD-50SV DD-50SV-30 DDE-50SV DDE-50SV-30 15 DA-15PVTI DAE-15PVTI 25 DB-25PVTI DBE-25PVTI 37 DC-37PVTI DCE-37PVTI 50 DD-50PVTI DDE-50PVTI Tin-Plated Shell 15 Mounting 25 Positions Gold Flash 37 9 DE-9SVT 50 15 DA-15SVT 25 DB-25SVT 37 DC-37SVT 50 DD-50SVT DA-15SVT Holes DB-25SVT 30in. Gold DC-37SVT DE-9SVT-30 DD-50SVT DA-15SVT-30 DB-25SVT-30 DC-37SVT-30 DD-50SVT-30 Call Toll Free: 1 (800) 323-9612 DAE-15SVT 4-40 Clinch Nuts DBE-25SVT Gold Flash DEE-9SVT DDE-50SVT DAE-15SVT DBE-25SVT DCE-37SVT DDE-50SVT DCE-37SVT 30in. Gold DEE-9SVT-30 DAE-15SVT-30 DBE-25SVT-30 DCE-37SVT-30 DDE-50SVT-30 4-44 belfuse.com/cinch 19 * Reliable wire wrap termination. * Two contact lengths: .375" or .585". * .025" square contact tails. * Contact Plating: Gold flash or 30in. gold. All over nickel. D-SUBMINIATURE METAL SHELL WIRE WRAP INDUSTRIAL Materials BASIC D SERIES * Contact Material: Copper alloy (machined). Reliable wire wrap termination. .375 (9.53) or .585 (14.86) Two contact lengths: .375" or .585". .025" square contact tails. Materials Contact Material Copper alloy (machined). Contact Plating Gold flash. All over nickel. .200 (5.08) REF. Ordering Information Ordering Information Wire Wrap Plugs Wire Wrap Plugs .375" Tail Length .375" Tail Length Zinc-Plated Shell with Chromate Finish Yellow Chromate Positions Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes Positions Gold Flash 30in. Gold 9 DE-9P-F179 DE-9P-F179-30 RoHS Compliant with Clear Chromate 15 DA-15P-F179 DA-15P-F179-30 Mounting 4-40 Clinch 25 DB-25P-F179 DB-25P-F179-30 Holes Nuts 37 DC-37P-F179 DC-37P-F179-30 Gold Gold Flash DD-50P-F179-30 50Flash DD-50P-F179 DEH-9P-F179 DEEH-9P-F179 9 DE-9P-F179 DEE-9P-F179 15 DA-15P-F179 DAE-15P-F179 DAH-15P-F179 DAEH-15P-F179 25 DB-25P-F179 DBE-25P-F179 DBH-25P-F179 DBEH-25P-F179 37 DC-37P-F179 DCE-37P-F179 50 DD-50P-F179 DDE-50P-F179 Tin-Plated Shell DCEH-37P-F179 with Grounding Indents DCH-37P-F179 Mounting Holes DDH-50P-F179 DDEH-50P-F179 Positions Gold Flash 30in. Gold 9 DE-9PTI-F179 DE-9PTI-F179-30 15 DA-15PTI-F179 DA-15PTI-F179-30 25 DB-25PTI-F179 DB-25PTI-F179-30 37 DC-37PTI-F179 DC-37PTI-F179-30 50 DD-50PTI-F179 DD-50PTI-F179-30 Tin-Plated Shell with Grounding Indents Positions Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash 9 DE-9PTI-F179 DEE-9PTI-F179 15 DA-15PTI-F179 DAE-15PTI-F179 25 DB-25PTI-F179 DBE-25PTI-F179 37 DC-37PTI-F179 DCE-37PTI-F179 50 DD-50PTI-F179 DDE-50PTI-F179 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9P-F179 DEE-9P-F179-30 DAE-15P-F179 DAE-15P-F179-30 DBE-25P-F179 DBE-25P-F179-30 DCE-37P-F179 DCE-37P-F179-30 DDE-50P-F179 DDE-50P-F179-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9PTI-F179 DEE-9PTI-F179-30 DAE-15PTI-F179 DAE-15PTI-F179-30 DBE-25PTI-F179 DBE-25PTI-F179-30 DCE-37PTI-F179 DCE-37PTI-F179-30 DDE-50PTI-F179 DDE-50PTI-F179-30 4-45 20 Cal D-SUBMINIATURE METAL SHELL WIRE WRAP BASIC D SERIES INDUSTRIAL Ordering Information Wire Wrap Plugs (Cont'd) .585" Tail Length Zinc-Plated Shell with Chromate Finish Yellow Chromate Mounting Holes Positions 4-40 Clinch Nuts RoHS Compliant with Clear Chromate Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash Gold Flash Gold Flash 9 DE-9P-F179C DEE-9P-F179C DEH-9P-F179C DEEH-9P-F179C 15 DA-15P-F179C DAE-15P-F179C DAH-15P-F179C DAEH-15P-F179C 25 DB-25P-F179C DBE-25P-F179C DBH-25P-F179C DBEH-25P-F179C 37 DC-37P-F179C DCE-37P-F179C DCH-37P-F179C DCEH-37P-F179C 50 DD-50P-F179C DDE-50P-F179C DDH-50P-F179C DDEH-50P-F179C Tin-Plated Shell with Grounding Indents Positions Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash 9 DE-9PTI-F179C DEE-9PTI-F179C 15 DA-15PTI-F179C DAE-15PTI-F179C 25 DB-25PTI-F179C DBE-25PTI-F179C 37 DC-37PTI-F179C DCE-37PTI-F179C 50 DD-50PTI-F179C DDE-50PTI-F179C belfuse.com/cinch 21 D-SUBMINIATURE METAL SHELL WIRE WRAP BASIC D SERIES Ordering Information Wire Wrap Sockets .375" Tail Length Zinc-Plated Shell with Yellow Chromate Finish RoHS Compliant with Clear Chromate Mounting Holes 4-40 Clinch Nuts Mounting Holes 4-40 Clinch Nuts Positions Gold Flash Gold Flash Gold Flash Gold Flash 9 DE-9S-F179 DEE-9S-F179 DEH-9S-F179 DEEH-9S-F179 15 DA-15S-F179 DAE-15S-F179 DAH-15S-F179 DAEH-15S-F179 25 DB-25S-F179 DBE-25S-F179 DBH-25S-F179 DBEH-25S-F179 37 DC-37S-F179 DCE-37S-F179 DCH-37S-F179 DCEH-37S-F179 50 DD-50S-F179 DDE-50S-F179 DDH-50S-F179 DDEH-50S-F179 Tin-Plated Shell Mounting Holes Positions 4-40 Clinch Nuts Gold Flash Gold Flash 9 DE-9ST-F179 DEE-9ST-F179 15 DA-15ST-F179 DAE-15ST-F179 25 DB-25ST-F179 DBE-25ST-F179 37 DC-37ST-F179 DCE-37ST-F179 50 DD-50ST-F179 DDE-50ST-F179 .585" Tail Length Zinc-Plated Shell with Chromate Finish Yellow Chromate Mounting Holes Positions 9 4-40 Clinch Nuts RoHS Compliant with Clear Chromate Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash Gold Flash Gold Flash DE-9S-F179C DEE-9S-F179C DEH-9S-F179C DEEH-9S-F179C 15 DA-15S-F179C DAE-15S-F179C DAH-15S-F179C DAEH-15S-F179C 25 DB-25S-F179C DBE-25S-F179C DBH-25S-F179C DBEH-25S-F179C 37 DC-37S-F179C DCE-37S-F179C DCH-37S-F179C DCEH-37S-F179C 50 DD-50S-F179C DDE-50S-F179C DDH-50S-F179C DDEH-50S-F179C Tin Plated Shell Positions Mounting Holes 4-40 Clinch Nuts Gold Flash Gold Flash 9 DE-9ST-F179C DEE-9ST-F179C 15 DA-15ST-F179C DAE-15ST-F179C 25 DB-25ST-F179C DBE-25ST-F179C 37 DC-37ST-F179C DCE-37ST-F179C 50 DD-50ST-F179C DDE-50ST-F179C 22 INDUSTRIAL mounting specifications. Insulator Material: Glass-filled diallyl phthalate (green) UL 94V-0 rated Connector Shell: Steel with zinc plating and yellow chromate finish or tin plating (grounding indents on plug) Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) Contact Plating: 30in. gold over nickel 4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish Dual Float Bushing: Stainless steel, passivated MATERIALS D-SUBMINIATURE METAL SHELL SOLDER CUP, SERIES 1 - HIGH RELIABILITY Features INDUSTRIAL Solder cup version for wire termination. ENVIRONMENTAL Commercial version of M24308 military connectors with tin-plated or zinc-plated shell and 30in. gold plating. Temperature: -65C to + 125C MonoblockOperating green diallyl phthalate insulator for improved electrical performance. Shock: 50G peak per MIL-STD-202, Method 213, Condition G Vibration:for 12precision cycles in three perpendicular directions @ 10-2000Hz, per Machined contacts performance. MIL-STD-202, Method 204, Condition D Offered in 9, 15, 25,Resistance: 37, and 50 90-95% positionrelative plugshumidity and sockets. Moisture @ 40C for 96 hours per MIL-STD-202, Method 103 Offered with 0.120 mounting holes or 4-40 clinch nuts. Approvals: ELECTRICAL * UL Recognized - Files E170218 (UL1977)and E130965 (UL1863). Withstanding Voltage: Minimum 1250V RMS @ sea level Current Rating: 5 Amps * CSA Approved - File LR31996. Contact Resistance: 2.7 milliohms maximum See pages 5-6Insulation for standard dimensions, contact arrangements, and panel mounting specifications. Resistance: 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing Materials Glass-filled diallyl phthalate (green), UL 94 V-O rated Connector Shell Steel with zinc plating and yellow chromate finish, RoHS clear chromate or tin plating (grounding indents on plug) MECHANICAL Insulator Material Individual Contact Insertion and Plug - Brass (machined), Socket - Phosphor bronze (machined) Separation Force (minimum/maximum): 0.7 oz./12 oz. Contact Material Contact Plating 30in gold over nickel 4-40 Clinch Nut Steel with cadmium plating and yellow chromate finish Durability: 500 mating cycles Dual Float Bushing Stainless Steel, passivated Environmental Operating Temperature -65C to +125C Shock 50G peak per MIL-STD-202, Method 213, Condition G Call Toll Free: 1 (800) 323-9612 4-48 Vibration 12 cycles in three perpendicular directions @ 10-2000Hz, per MILSTD-202, Method 204, Condition D Moisture Resistance 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 Electrical Withstanding Voltage Minimum 1250V RMS @ sea level Current Rating 5 Amps Contact Resistance 2.7 milliohms maximum Insulation Resistance 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing Mechanical Individual Contact Insertion and Separation Force 0.7 oz. minimum/12oz. maximum Durability 500 mating cycles belfuse.com/cinch 23 D-subminiature Metal Shell Solder Cup Series 1 - High Reliability D-SUBMINIATURE METAL SHELL SOLDER CUP SERIES 1 - HIGH RELIABILITY * Will accommodate up to 20 AWG wire. INDUSTRIAL Will accommodate up to 20 AWG wire. .390 (9.91) .200 (5.08) REF. Ordering Information Ordering Information Solder Cup Plugs Solder Cup Plugs Zinc-Plated Shell with Yellow Chromate Finish Zinc-Plated Shell with Chromate Finish Tin-Plated Shell with Grounding Indents Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings 9 Yellow Chromate DEM-9P with Clear Chromate DEME-9PRoHS Compliant DEMY-9P DEM-9PTI DEME-9PTI DEMY-9PTI Mounting DAMY-15P 4-40 Clinch DAM-15PTI Holes DBMY-25P Nuts DBM-25PTI DAME-15PTI DAMY-15PTI DBME-25PTI DBMY-25PTI Positions 37Gold Flash DCM-37P Gold Flash DCME-37P Gold Flash DCMY-37P Gold Flash DCM-37PTI DCME-37PTI DCMY-37PTI 9 50 DEM-9PDDM-50P DEME-9P DDME-50P DEMH-9P DDMY-50P DEMEH-9P DDM-50PTI DDME-50PTI DDMY-50PTI Mounting Holes 15 DAM-15P 4-40 Clinch DAME-15P Nuts DBME-25P 25 DBM-25P 15 25 37 DAM-15P DAME-15P DAMH-15P DAMEH-15P DBM-25P DBME-25P DBMH-25P DBMEH-25P DCME-37P DCMH-37P DCMEH-37P DDME-50P DDMH-50P DDMEH-50P SolderDCM-37P Cup Sockets 50 DDM-50P Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings Solder Cup 9 Sockets DEM-9S 15 DAM-15S DEME-9S DEMY-9S DEM-9ST DEME-9ST DEMY-9ST DAME-15S DAMY-15S DAM-15ST DAME-15ST DAMY-15ST DBMY-25S DBM-25ST DBME-25ST DBMY-25ST DCME-37S DCMY-37S DCM-37ST RoHS Compliant with Clear Chromate DCME-37ST DCMY-37ST DDME-50ST DDMY-50ST Zinc-Plated25Shell with Chromate Finish DBM-25S DBME-25S 37 50 DCM-37S Yellow Chromate DDM-50S 4-40 Clinch DDME-50S Mounting DDMY-50S 4-40 Clinch DDM-50ST Mounting Holes Positions 9 Nuts Holes Nuts Gold Flash Gold Flash Gold Flash Gold Flash DEM-9S DEME-9S DEMH-9S DEMEH-9S 15 DAM-15S DAME-15S DAMH-15S DAMEH-15S 25 DBM-25S DBME-25S DBMH-25S DBMEH-25S 37 DCM-37S DCME-37S DCMH-37S DCMEH-37S 50 DDM-50S DDME-50S DDMH-50S DDMEH-50S 4-49 24 Call Toll Free: 1 (800) 323-9612 D-SUBMINIATURE METAL SHELL CRIMP AND POKE SERIES 3 - HIGH RELIABILITY INDUSTRIAL Features D-subminiature Metal Shell Crimp and High-reliability in a commercial gradePoke connector. Series 3 - High Reliability Monoblock diallyl phthalate insulator for improved electrical performance. Offered in 9, 15, 25, 37, and 50 position plugs and sockets. Offered with .120 mounting holes and 4-40 clinch nuts. FEATURES High-reliability in a commercial grade connector. Monoblock diallyl phthalate insulator for improved electricalshell performance. Commercial version of M24308 Military connectors with tin-plated or zinc-plated and 30in. gold contact Offered in 9, 15, 25, 37, and 50 position plugs and sockets. plating. Offered with .120 mounting holes, 4-40 clinch nuts, or dual float bushings. Commercial of M24308 Military connectors with tin-plated or zinc-plated shell and Screw Machine Crimp and Poke contactsversion available as follows: 30in. gold contact plating. * Note that all contacts are packed loose. Screw Machine Crimp and Poke contacts available as follows: * Plating options: 30in. gold. * Note that all contacts are packed loose. * Plating options: 30in. gold. (FO part numbers). * Can be included with the connector or purchased separately * Can be included with the connector or purchased separately (FO part numbers). See pages 5-6 for standard dimensions, contact arrangements, and panelcontact mounting specifications. See pages 4-5 thru 4-10 for standard dimensions, arrangements, and panel mounting specifications. Materials Insulator Material Glass fiber-filled diallyl phthalate (green), UL 94 V-O Connector Shell Steel with zinc plating(green), and yellow chromate finish, RoHS, clear UL 94V-0 chromate or tinShell: platedSteel with zinc plating and yellow chromate finish Connector Dual Float Bushing Environmental Operating Temperature Shock Vibration Moisture Resistance Electrical Withstanding Voltage Current Rating MATERIALS 4-40 Clinch Nut ENVIRONMENTAL Contact Plating Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) 30inContact gold over nickel30in. gold over nickel Plating: Clinch Nut: Steeland withyellow cadmium plating finish and yellow Steel 4-40 with cadmium plating chromate chromate finish Stainless DualSteel, Floatpassivated Bushing: Stainless steel, passivated Plug - Brass (machined), Socket - Phosphor bronze (machined) Operating Temperature: -65C to + 125C -65CShock: to +125C 50G peak per MIL-STD-202, Method 213, G 50G peak perCondition MIL-STD-202, Method 213, Condition G Vibration: 12 cycles in three perpendicular directions @ 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL10-2000Hz, per MIL-STD-202, Method 204, Condition D Moisture Resistance: 90-95% D relative humidity @ 40C for 96 STD-202, Method 204, Condition hours per MIL-STD-202, Method 103 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 Withstanding Voltage: Minimum 1250V RMS @ sea level Current Rating: 5 Amps Contact Resistance: 2.7 milliohms maximum Insulation Resistance: Minimum 1250V RMS @ sea level5000 megohms maximum (initial); 1000 megohms (minimum) after 5 Amps environmental testing ELECTRICAL Contact Material Insulator Material: Glass fiber-filled diallyl phthalate 2.7 milliohms maximum Insulation Resistance 5000 megohms maximum (initial); 1000 megohms (minimum) after Individual testing Contact Insertion and environmental Mechanical Individual Contact Insertion and Separation Force Durability MECHANICAL Contact Resistance Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles 0.7 oz. minimum/12oz. maximum 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-70 belfuse.com/cinch 25 D-subminiature Metal Shell Crimp and Poke D-SUBMINIATURE METAL SHELL CRIMP AND POKE Series 3 - High Reliability SERIES 3 - HIGH RELIABILITY INDUSTRIAL .375 (9.53) max. Termination Tooling Termination Tooling Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 51. * Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 4-103. * Crimp Contact Hand Tool: Military #M22520/2-01. See Seepage page 51. 4-103. Contact Positioner(below) required. Crimp Contact Hand Tool: Military #M22520/2-01. Contact Positioner (below) required. * Positioner for machine contacts HandTool Tool #M22520/2-01 #M22520/2-01 (locates contact in the Positioner for machine contacts forforHand (locates contact in correct the correct position): position): #M22520/2-08. See page 4-103. #M22520/2-08. See page 51. Ordering Information Ordering Information Crimp and Poke - Plugs Crimp and Poke Plugs Zinc-Plated Shell- with Yellow Chromate Finish Mounting Holes 4-40 Clinch Nuts 30in. Gold Without 30in. Gold Without Zinc-Plated with Chromate Finish PositionsShellContacts Contacts Contacts Contacts 9 DEMA-9P DEMA-9P-FO DEMAE-9P DEMAE-9P-FO Yellow Chromate 15 DAMA-15P DAMA-15P-FO DAMAE-15P DAMAE-15P-FO 25 DBMA-25P DBMA-25P-FO DBMAE-25P DBMAE-25P-FO Mounting Holes 4-40 Clinch Nuts 37 DCMA-37P DCMA-37P-FO DCMAE-37P DCMAE-37P-FO 50 DDMA-50P DDMA-50P-FO DDMAE-50P DDMAE-50P-FO Positions 50in. Gold Without 50in. Gold Without Contacts Contacts Contacts Contacts 9 15 25 37 50 Tin-Plated Shells with Grounding Indents DEMA-9P DEMA-9P-FO Mounting Holes DAMA-15P DAMA-15P-FO 30in. Gold Without DBMA-25P-FO Positions DBMA-25P Contacts Contacts 9 DEMA-9PTI DEMA-9PTI-FO DCMA-37P DCMA-37P-FO 15 DAMA-15PTI DAMA-15PTI-FO DDMA-50P DDMA-50P-FO 25 DBMA-25PTI DBMA-25PTI-FO 37 DCMA-37PTI DCMA-37PTI-FO 50 DDMA-50PTI DDMA-50PTI-FO Tin-Plated Shells with Grounding Indents Mounting Holes DEMAE-9P DEMAE-9P-FO 4-40 Clinch Nuts DAMAE-15P DAMAE-15P-FO 30in. Gold Without DBMAE-25P DBMAE-25P-FO Contacts Contacts DEMAE-9PTI DEMAE-9PTI-FO DCMAE-37P DCMAE-37P-FO DAMAE-15PTI DAMAE-15PTI-FO DDMAE-50P DDMAE-50P-FO DBMAE-25PTI DBMAE-25PTI-FO DCMAE-37PTI DCMAE-37PTI-FO DDMAE-50PTI DDMAE-50PTI-FO Dual Float Bushings 30in. Gold Without Contacts Contacts DEMAY-9P DEMAY-9P-FO RoHS Compliant with Clear Chromate DAMAY-15P DAMAY-15P-FO DBMAY-25P DBMAY-25P-FO Mounting 4-40 Clinch DCMAY-37P DCMAY-37P-FO Holes Nuts DDMAY-50P DDMAY-50P-FO 50in. Gold Without Contacts Contacts DEMAH-9P Dual Float DAMAH-15P 30in. Gold DBMAH-25P Contacts DEMAY-9PTI DCMAH-37P DAMAY-15PTI DDMAH-50P DBMAY-25PTI DCMAY-37PTI DDMAY-50PTI DEMAEH-9P-FO Bushings DAMAEH-15P-FO Without DBMAEH-25P-FO Contacts DEMAY-9PTI-FO DCMAEH-37P-FO DAMAY-15PTI-FO DDMAEH-50P-FO DBMAY-25PTI-FO DCMAY-37PTI-FO DDMAY-50PTI-FO 4-40 Clinch Nuts Positions 50in. Gold Contacts Without Contacts 50in. Gold Contacts Without Contacts 9 DEMA-9PTI DEMA-9PTI-FO DEMAE-9PTI DEMAE-9PTI-FO 15 DAMA-15PTI DAMA-15PTI-FO DAMAE-15PTI DAMAE-15PTI-FO 25 DBMA-25PTI DBMA-25PTI-FO DBMAE-25PTI DBMAE-25PTI-FO 37 DCMA-37PTI DCMA-37PTI-FO DCMAE-37PTI DCMAE-37PTI-FO 50 DDMA-50PTI DDMA-50PTI-FO DDMAE-50PTI DDMAE-50PTI-FO 4-71 26 Call Toll Free: 1 (800) 323-9612 D-SUBMINIATURE METAL SHELL CRIMP AND POKE SERIES 3 - HIGH RELIABILITY INDUSTRIAL D-subminiature Metal Shell Crimp and Poke Series 3 - High Reliability Ordering Information Crimp and Poke - Sockets Zinc-Plated Shell with Chromate Finish Ordering Information Yellow Chromate Mounting Holes Positions 50in. Gold Contacts 9 DEMA-9S 15 DAMA-15S 25 DBMA-25S 37 DCMA-37S 50 DDMA-50S RoHS Compliant with Clear Chromate Crimp and Poke4-40 - Sockets Clinch Nuts Zinc-Plated Shell with Yellow Chromate Finish Without Contacts Positions DEMA-9S-FO 9 DAMA-15S-FO15 DBMA-25S-FO25 37 DCMA-37S-FO 50 DDMA-50S-FO 50in. Gold Without Mounting Holes Contacts Contacts 30in. Gold Without Contacts Contacts DEMAE-9S DEMAE-9S-FO DEMA-9S DEMA-9S-FO DAMAE-15S DAMAE-15S-FO DAMA-15S DAMA-15S-FO DBMA-25S DBMA-25S-FO DBMAE-25S DBMAE-25S-FO DCMA-37S DCMA-37S-FO DCMAE-37S DCMAE-37S-FO DDMA-50S DDMA-50S-FO DDMAE-50S DDMAE-50S-FO Tin-Plated Shell Tin-Plated Shell 15 Mounting Holes 30in. Gold Without Positions Contacts Contacts Mounting Holes 4-40 Clinch Nuts 9 DEMA-9ST DEMA-9ST-FO 50in. Gold Without 15 50in. Gold Without DAMA-15ST DAMA-15ST-FO Contacts 25 Contacts Contacts Contacts DBMA-25ST DBMA-25ST-FO DCMA-37ST DCMA-37ST-FO DEMA-9ST DEMA-9ST-FO37 DEMAE-9ST DEMAE-9ST-FO 50 DDMA-50ST DDMA-50ST-FO DAMA-15ST DAMA-15ST-FO DAMAE-15ST DAMAE-15ST-FO 25 DBMA-25ST DBMA-25ST-FO 37 DCMA-37ST 50 DDMA-50ST Positions 9 DBMAE-25ST DBMAE-25ST-FO DCMA-37ST-FO DCMAE-37ST DCMAE-37ST-FO DDMA-50ST-FO DDMAE-50ST DDMAE-50ST-FO 4 Mounting Holes 4-40 Clinch Nuts 50in. 4-40 GoldClinch Nuts Without Contacts Contacts 30in. Gold Without Contacts Contacts DEMAH-9S DEMAEH-9S-FO DEMAE-9S DEMAE-9S-FO DAMAH-15S DAMAEH-15S-FO DAMAE-15S DAMAE-15S-FO DBMAE-25S DBMAH-25S DBMAE-25S-FO DBMAEH-25S-FO DCMAE-37S DCMAE-37S-FO DCMAH-37S DCMAEH-37S-FO DDMAE-50S DDMAE-50S-FO DDMAH-50S DDMAEH-50S-FO Dual Fl 30in. Gold Contacts DEMAY-9S DAMAY-15S DBMAY-25S DCMAY-37S DDMAY-50S 4-40 Clinch Nuts 30in. Gold Without Contacts Contacts DEMAE-9ST DEMAE-9ST-FO DAMAE-15ST DAMAE-15ST-FO DBMAE-25ST DBMAE-25ST-FO DCMAE-37ST DCMAE-37ST-FO DDMAE-50ST DDMAE-50ST-FO Dual Fl 30in. Gold Contacts DEMAY-9ST DAMAY-15ST DBMAY-25ST DCMAY-37ST DDMAY-50ST Crimp and Poke Machined Contacts * Will accommodate 20, 22, and 24 AWG wire. Crimp and Poke Machined Contacts Will accommodate 20, 22, and 24 AWG wire. Ordering Information Contacts Description Pin M39029/64-369 Socket M39029/63-368 Ordering Information Contacts Description Pin Socket M39029/64-369 M39029/63-368 27 belfuse.com/cinch D-subminiature Metal Shell MIL-C-24308METAL SHELL MIL-C-24308 D-SUBMINIATURE M24308 Series M24308 SERIES INDUSTRIAL Features Meets all MIL-C-24308 Class G specifications. Meets all MIL-C-24308 Class G specifications. Offered in Crimp and Poke and Solder Cup and PCB vertical and right-angle. Offered 15, 25, 37, and and 50 position andright-angle sockets except right-angle (9 to 37 positions). Offered in 9, 15, 25, 37, andin509,position plugs socketsplugs except (9 to 37 positions). Monoblock green diallyl phthalate insulator for improved electrical performance. Monoblock greendiallyl phthalate insulator for standard improveddimensions, electrical performance. See pages 4-5 thru 4-10 for contact arrangements, and panel mounting specifications. FEATURES Offered in Crimp and Poke and Solder Cup and PCB vertical and right-angle. See pages 4-6 for standard dimensions, contact arrangements, and panel mounting specifications. Materials Insulator Material MATERIALS Connector Shell Contact Material Contact Plating 4-40 Clinch Nut Dual Float Bushing Insulator Material: Glass-filled diallyl phthalate (green) Glass-filled diallyl phthalate (green), per MIL-M-14, Type SDG-F per MIL-M-14, Type SDG-F Steel with cadmium and plating yellow chromate Connector Shell: Steel withplating cadmium and yellowfinish finish Plug - Brasschromate (machined), Socket - Phosphor bronze (machined) Contact Material: Plug - Brass (machined), Socket - Phosphor 50in gold over copper or nickel bronze (machined) ContactSteel Plating: 50in. gold overand copper nickel finish with cadmium plating yelloworchromate Dual Float Bushing: Stainless steel, passivated or Stainless Steel,non-magnetic passivated orbrass non-magnetic brass Environmental ENVIRONMENTAL Operating Temperature: -65C to + 125C Operating Temperature to +125C Shock: -65C 50G peak per MIL-STD-202, Method 213, Condition G Shock 50G12 peak per in MIL-STD-202, Methoddirections 213, Condition Vibration: cycles three perpendicular @ G 10-2000Hz, MIL-STD-202 Method @ 204, Vibration 12 cycles in threeper perpendicular directions 10-2000Hz, per MILCondition D 204, Condition D STD-202, Method Moisture Resistance: 90-95% relative humidity @ 40C for 96 Moisture Resistance 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, hours per MIL-STD-202, Method 103 Method 103 Electrical Current Rating ELECTRICAL Withstanding Voltage Contact Resistance Insulation Resistance Withstanding Voltage: Minimum 1250V RMS @ sea level Minimum RMS @5 sea level Current1250V Rating: Amps 5 Amps Contact Resistance: 2.7 milliohms maximum 2.7 milliohms maximum5000 megohms maximum (initial); Insulation Resistance: 1000 megohms after 5000 megohms maximum (initial); 1000 (minimum) megohms (minimum) after environmental testing environmental testing Mechanical MECHANICAL Individual Contact Insertion 0.7 oz. minimum/12oz. maximum and Separation Force Individual Contact Insertion and Durability 500 mating cycles Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-74 28 D-subminiature Metal Shell MIL-C-24308 CrimpMETAL and Poke D-SUBMINIATURE SHELL MIL-C-24308 M24308 Series CRIMP AND POKE M24308 SERIES INDUSTRIAL Available with .120 mounting holes, float bushings, or dual float bushings. * Available with .120 mounting holes, float bushings, or dual float bushings. * Order contacts included or separately. Orderwith with contacts included or separately. * Order with contact Insertion/Extraction Tool included or order tool #CIET-20-HD separately. See page 4-103. Order with contact Insertion/Extraction Tool included or order tool #CIET-20-HD separately. See page 51. Ordering Information Crimp and Poke Plugs Ordering Information Crimp and Poke Plugs Steel Shell Steel Shell Contacts Included. Insertion/Extraction Tool Not Included. Contacts Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/4-1F M24308/4-302F M24308/4-435F 915 M24308/4-1F M24308/4-302F M24308/4-435F M24308/4-2F M24308/4-303F M24308/4-436F 25 M24308/4-3F M24308/4-304F M24308/4-437F 15 M24308/4-2F M24308/4-303F M24308/4-436F 37 M24308/4-4F M24308/4-305F M24308/4-438F 25 M24308/4-3F M24308/4-304F M24308/4-437F 50 M24308/4-5F M24308/4-306F M24308/4-439F 37 M24308/4-4F M24308/4-305F M24308/4-438F 50 M24308/4-5F M24308/4-306F M24308/4-439F Contacts Included. Insertion/Extraction Tool Included. Positions Mounting Holes Float Bushings Dual Float Bushings Contacts Included. Insertion/Extraction Tool Included. 9 M24308/4-6F M24308/4-313F M24308/4-446F 15 M24308/4-7F M24308/4-314F M24308/4-447F Positions Mounting Holes Float Bushings Dual Float Bushings 25 M24308/4-8F M24308/4-315F M24308/4-448F 937 M24308/4-6F M24308/4-313F M24308/4-446F M24308/4-9F M24308/4-316F M24308/4-449F 50 M24308/4-10F M24308/4-317F M24308/4-450F 15 M24308/4-7F M24308/4-314F M24308/4-447F 25 M24308/4-8F M24308/4-315F M24308/4-448F 37 M24308/4-9F M24308/4-316F M24308/4-449F 50 M24308/4-10F M24308/4-317F M24308/4-450F 9 M24308/4-259F M24308/4-324F M24308/4-457F 15 M24308/4-260F M24308/4-325F M24308/4-458F 25 M24308/4-261F M24308/4-326F M24308/4-459F 37 M24308/4-262F M24308/4-327F M24308/4-460F 50 M24308/4-263F M24308/4-328F M24308/4-461F Contacts Not Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/4-259F M24308/4-324F M24308/4-457F 15 M24308/4-260F M24308/4-325F M24308/4-458F Contacts Included. Insertion/Extraction Tool Not Included. 25 M24308/4-261F M24308/4-326F M24308/4-459F 37 M24308/4-262F M24308/4-327F M24308/4-460F Positions Mounting Holes Float Bushings Dual Float Bushings 50 M24308/4-263F M24308/4-328F M24308/4-461F 4-75 29 belfuse.com/cinch Call Toll Free: 1 (800) 323-9612 D-SUBMINIATURE METAL SHELL MIL-C-24308 CRIMP AND POKE M24308 Ordering Information Crimp and Poke Sockets Steel Shell Contacts Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/2-1F M24308/2-23F M24308/2-342F 15 M24308/2-2F M24308/2-24F M24308/2-343F 25 M24308/2-3F M24308/2-25F M24308/2-344F 37 M24308/2-4F M24308/2-26F M24308/2-345F 50 M24308/2-5F M24308/2-27F M24308/2-346F Contacts Included. Insertion/Extraction Tool Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/2-6F M24308/2-34F M24308/2-353F 15 M24308/2-7F M24308/2-35F M24308/2-354F 25 M24308/2-8F M24308/2-36F M24308/2-355F 37 M24308/2-9F M24308/2-37F M24308/2-356F 50 M24308/2-10F M24308/2-38F M24308/2-357F Contacts Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/2-281F M24308/2-292F M24308/2-482F 15 M24308/2-282F M24308/2-293F M24308/2-483F 25 M24308/2-283F M24308/2-294F M24308/2-484F 37 M24308/2-284F M24308/2-295F M24308/2-485F 50 M24308/2-285F M24308/2-296F M24308/2-486F 30 INDUSTRIAL D-SUBMINIATURE METAL SHELL MIL-C-24308 CRIMP AND POKE M24308 SERIES INDUSTRIAL D-subminiature Metal Shell Ordering Information MIL-C-24308 Crimp and Poke M24308 Series Tooling Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 51. Ordering Information Wire termination hand tool: #M22520/2-01. See page 51. Tooling Positioner for machine contacts for hand tool #M22520/2-08 (locates contact in the correct position). * Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 4-103. See page 51. * Wire termination hand tool: #M22520/2-01. See page 4-103. * Positioner for machine contacts for hand tool #M22520/2-08 (locates contact in the correct position). See page 4-103. Crimp and Poke Contacts Crimp and Poke Contacts Ordering Information * Will accommodate 20, 22, and 24 AWG wire. Ordering Information 4 Description 20, 22, and 24 AWG wire. Pin Will accommodate M39029/64-369 Socket M39029/63-368 Description Pin M39029/64-369 Socket M39029/63-368 belfuse.com/cinch 31 MIL-C-24308 Solder Cup M24308 Series D-SUBMINIATURE METAL SHELL MIL-C-24308 INDUSTRIAL * Available with .120" mounting holes, float bushings, or dual float bushings. SOLDER CUP M24308 *SERIES Will accommodate up to 20 AWG wire. Available with .120" mounting holes, float bushings, or dual float bushings. Will accommodate up to 20 AWG wire. Ordering Information Solder Cup Plugs Steel Shell Positions Ordering Information Mounting Holes Float Bushings Dual Float Bushings 9 M24308/3-1F M24308/2-12F M24308/2-17F 15 M24308/3-2F Steel Shell M24308/2-13F 25 M24308/3-3F 37 M24308/3-4F 50 M24308/3-5F Brass Non-Magnetic Shell Positions Mounting Holes 9 M24308/7-1F 15 M24308/7-2F 25 M24308/7-3F 37 M24308/7-4F 50 M24308/7-5F Solder Cup Sockets Solder Cup Plugs 4 Positions M24308/2-14F 9 M24308/2-15F 15 25 M24308/2-16F 37 50 M24308/2-18F Mounting Holes M24308/2-19F M24308/3-1F M24308/2-20F M24308/3-2F M24308/3-3F M24308/2-21F M24308/3-4F M24308/3-5F Brass Non-Magnetic Shell Float Bushings Dual Float Bushings Positions 9 M24308/7-13F 15 25 M24308/7-14F 37 M24308/7-15F 50 M24308/7-12F M24308/7-16F Mounting Holes M24308/7-17F M24308/7-1F M24308/7-18F M24308/7-2F M24308/7-3F M24308/7-19F M24308/7-4F M24308/7-20F M24308/7-5F M24308/7-21F 9 M24308/1-1F 15 M24308/1-2F 25 M24308/1-3F M24308/1-14F M24308/1-25F 37 M24308/1-4F M24308/1-15F M24308/1-26F 50 M24308/1-5F Positions Mounting Holes Brass Non-Magnetic Shell Positions Mounting Holes Dual Float Bushings M24308/3-17F M24308/3-18F M24308/3-19F M24308/3-20F M24308/3-21F Float Bushings M24308/7-12F M24308/7-13F M24308/7-14F M24308/7-15F M24308/7-16F Dual Float Bushings M24308/7-17F M24308/7-18F M24308/7-19F M24308/7-20F M24308/7-21F Float Bushings M24308/1-12F M24308/1-13F M24308/1-14F M24308/1-15F M24308/1-16F Dual Float Bushings M24308/1-23F M24308/1-24F M24308/1-25F M24308/1-26F M24308/1-27F Float Bushings M24308/5-12F M24308/5-13F M24308/5-14F M24308/5-15F M24308/5-16F Dual Float Bushings M24308/5-23F M24308/5-24F M24308/5-25F M24308/5-26F M24308/5-27F Solder Cup Sockets Steel Shell Positions 9 Float 15 Bushings 25 M24308/1-12F 37 M24308/1-13F 50 Steel Shell Float Bushings M24308/3-12F M24308/3-13F M24308/3-14F M24308/3-15F M24308/3-16F Mounting Holes M24308/1-1F M24308/1-2F Dual Float Bushings M24308/1-3F M24308/1-23F M24308/1-4F M24308/1-24F M24308/1-5F Brass Non-Magnetic Shell M24308/1-27F Mounting Holes 9 M24308/5-1F 15 M24308/5-2F 25 M24308/5-3F 37 M24308/5-4F 50 M24308/5-5F Float Bushings Dual Float Bushings M24308/1-16F Positions 9 M24308/5-1F M24308/5-12F M24308/5-23F 15 M24308/5-2F M24308/5-13F M24308/5-24F 25 M24308/5-3F M24308/5-14FCall 37 M24308/5-4F M24308/5-15F M24308/5-26F 50 M24308/5-5F M24308/5-16F M24308/5-27F Toll Free: 1 (800) 323-9612 M24308/5-25F 32 4-78 D-subminiature Metal Shell MIL-C-24308 PCB D-SUBMINIATURE METAL SHELL MIL-C-24308 M24308 Series Metal Shell D-subminiature PCB M24308 MIL-C-24308SERIES PCB M24308 Series Ordering Information Right-Angle Connector .283" footprintrequires requires minimal minimal PCB *.283" footprint PCBspace. space. *Right-Angle Available with three contact tail lengths (.127", .158", and .183") with .030" Connector contactwith diameter. Available three contact tail lengths (.127" and .183") with .030" contact * Available with two contact tail lengths (.127" and .183") with .040" *diameter. .283" footprint requires minimal PCB space. contact diameter. * Available with three contact tail lengths (.127", .158", and .183") with .030" Offered with .120" mounting holes. contact diameter. *Offered with .120" mounting holes. Mounting bracket: Black nylon. Can be removed if necessary. * Available with two contact tail lengths (.127" and .183") with .040" contact bracket: diameter. Black nylon. Can be removed if necessary. Mounting * Offered with .120" mounting holes. * Mounting bracket: Black nylon. Can be removed if necessary. INDUSTRIAL Right-Angle 0.396 0.340 Right-Angle 0.283 0.396 0.340 0.283 See Chart See Chart 0.122 (2.84) Ordering OrderingInformation Information 0.122 (2.84) Right-Angle (Sockets not available) Right-AnglePCB PCB Plugs Plugs (Sockets not available) Ordering Information Steel Shell Steel Shell .127 Tail Length .158 Tail Length Right-Angle Plugs (Sockets not available) Positions .030 PCB Contact Diameter .030 Contact Diameter .183 Tail Length .127 Tail Length .183 Tail Length .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter Positions .127 Tail Length .183 Tail Length 9 M24308/24-25F M24308/24-31F M24308/24-49F M24308/24-37F M24308/24-55F .030 Contact Diameter .030 Contact Diameter 15 Shell M24308/24-26F M24308/24-32F M24308/24-50F M24308/24-38F M24308/24-56F Steel 25 M24308/24-27F M24308/24-33F M24308/24-51F M24308/24-39F M24308/24-57F .127 Tail Length .158 Tail Length .183 Tail Length .127 Tail Length .183 Tail Length 9 M24308/24-25F M24308/24-49F 37 M24308/24-34F M24308/24-52F M24308/24-40F M24308/24-58F Positions .030M24308/24-28F Contact Diameter .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter 15 M24308/24-26F M24308/24-50F 9 M24308/24-25F M24308/24-31F M24308/24-49F M24308/24-37F M24308/24-55F Vertical 15 M24308/24-26F M24308/24-32F M24308/24-50F M24308/24-38F M24308/24-56F 25 M24308/24-27F M24308/24-51F Vertical Connector 25 M24308/24-27F M24308/24-33F M24308/24-51F M24308/24-39F M24308/24-57F 37 M24308/24-28F M24308/24-52F 37 M24308/24-28F M24308/24-34F M24308/24-52F M24308/24-40F M24308/24-58F * Available with two contact tail lengths (.158" and .183") and two contact diameters (.030" and .040"). VerticalConnector Connector Vertical * Offered with .120" mounting holes. * Vertical Available with two contact tail lengths (.158" and .183") and two contact Available with two and contact tail lengths (.158" and .183") with contact diameter diameters (.030" .040"). Ordering Information .030". * Offered with .120" mounting holes. PCB.120" Plugs Vertical Offered with mounting holes. Ordering Steel ShellInformation Ordering Information .158 Tail Length .183 Tail Length .158 Tail Length .183 Tail Length Vertical PCB Plugs Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter Positions .030 Contact 9 M24308/24-7F M24308/24-13F M24308/24-19F Vertical PCB M24308/24-1F Plugs Vertical PCB Sockets 15 Shell M24308/24-2F M24308/24-8F M24308/24-14F M24308/24-20F Steel 25 M24308/24-3F M24308/24-9F M24308/24-15F M24308/24-21F .158 Tail Length .183 Tail Length .158 Tail Length .183 Tail Length 37 M24308/24-10F M24308/24-16F Positions .030M24308/24-4F Contact Diameter .030 Contact Diameter .040 Contact Diameter Contact Diameter Steel Shell Steel Shell .040M24308/24-22F 50 M24308/24-5F M24308/24-11F M24308/24-17F M24308/24-23F 9 M24308/24-1F M24308/24-7F M24308/24-13F M24308/24-19F 15 M24308/24-2F M24308/24-8F M24308/24-14F M24308/24-20F 25 M24308/24-3F M24308/24-9F M24308/24-15F M24308/24-21F Positions .158 Tail Length .183 Tail Length Positions .158 Tail Length 37 M24308/24-4F M24308/24-10F M24308/24-16F .030 Contact Diameter .030 Contact Diameter .030M24308/24-22F Contact Diameter Vertical PCBM24308/24-5F Sockets 50 M24308/24-11F M24308/24-17F M24308/24-23F 9 M24308/24-1F M24308/24-7F 9 M24308/23-1F 15 Steel Shell M24308/24-2F M24308/24-8F M24308/23-2F .158 Tail Length .183 Tail Length .158 Tail 15 Length .183 Tail Length Positions .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter Sockets 25Vertical PCB M24308/24-3F M24308/24-9F 25 M24308/23-3F 9 M24308/23-1F M24308/23-7F M24308/23-13F M24308/23-19F 37Steel M24308/24-10F 37 M24308/23-4F 15 Shell M24308/24-4F M24308/23-2F M24308/23-8F M24308/23-14F M24308/23-20F 25 M24308/23-3F M24308/23-9F M24308/23-15F M24308/23-21F .158 Tail Length .183 Tail Length .158 Tail Length .183 Tail Length 50 M24308/24-5F M24308/24-11F 50 M24308/23-5F 37 M24308/23-10F M24308/23-16F M24308/23-22F Positions .030M24308/23-4F Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter 50 M24308/23-5F M24308/23-11F M24308/23-17F M24308/23-23F 9 M24308/23-1F M24308/23-7F M24308/23-13F M24308/23-19F 15 M24308/23-2F M24308/23-8F M24308/23-14F M24308/23-20F 25 M24308/23-3F M24308/23-9F M24308/23-15F M24308/23-21F 37 M24308/23-4F M24308/23-10F M24308/23-16F M24308/23-22F 50 M24308/23-5F M24308/23-11F M24308/23-17F M24308/23-23F 4-79 33 .183 Tail Length .030 Contact Diameter M24308/23-7F M24308/23-8F M24308/23-9F M24308/23-10F M24308/23-11F belfuse.com/cinch Call Toll Free: 1 (800) 323-9612 4 4 D-SUBMINIATURE BACKSHELLS/JUNCTION SHELLS/HOODS ACCESSORIES INDUSTRIAL Features Cinch backshells are offered in a variety of styles, each having a specific strength. Backshells have two-piece construction and are frequently used where appearance is a major factor. RFI/EMI shielding capability is also an option: * Plastic Backshells: No shielding. * Metallized Plastic: Economical method of shielding. * Diecast Backshells: Maximum shielding. Cinch SDH Series backshells utilize Cinch's Latch-N-LockTM system with quick release disconnect. Just squeeze the latch levers to release the connector. Also available with standard 4-40 mounting hardware. Junction Shells come in a variety of sizes and shapes including right-angle and low profile. They are generally of one-piece construction with an adjustable clamp, but there is no shielding. Hoods have an improved appearance versus junction shells but no shielding. They are all-plastic and come in right-angle or straight configurations. Hardware, in the form of adjustable grommets or strain relief clamps and 4-40 screws, is generally supplied with the product; however, a variety of optional hardware is also available in the accessories section of this catalog. 34 D-SUBMINIATURE BACKSHELLS - TWO-PIECE D*H SERIES INDUSTRIAL Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. D-subminiature Fits standard metal shell D-subminiature plugs and sockets as well as HTD Series 1.5 D-subs. Backshells - Two-Piece D*H Series Ethernet hoods are available in diecast 15 position versions only with both 90 and 180 cable entry. Included in all backshells: * Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. * Included in all backshells: * Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket. * Fits standard metal shell D-subminiature plugs and sockets as well as HTD Series 1.5 D-subs. * Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs. * Ethernet hoods are available in diecast 15 position versions only with both 90 and 180 cable entry. Backshells- are individually bagged. Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket. - Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs. Note that slide locks may not be used with these backshells. * Backshells are individually bagged. * Note that slide locks may not be used with these backshells. Optional thumbscrew for backshell must be ordered separately if required. * Optional thumbscrew for backshell must be ordered separately if required. Materials 4-40 screws, hex nuts, Materials mounting bracket Steel with zinc plating and clear chromate coating * 4-40 screws, hex Plastic nuts, mounting bracket: with zinc plating andwith clearzinc chromate Standard Backshells Backshells: ABS Steel (black), hardware - steel plating,coating. grommets - polyphenylene, (black). * Standard Backshells: Metallized Plastic Backshells: ABS with nickel over copper plating, hardware - steel with zinc plating, grommets - Plastic Backshells: (black), hardware - steel with zinc plating, grommets - polyphenylene, (black). - PVCABS (black). - Metallized Plastic Backshells: ABSDiecast with nickel over copper plating, hardware - steel with zinc plating, Diecast Backshells: zinc, grommets - PVC (black). grommets - PVC (black). Ethernet Backshells DiecastDiecast zinc, grommets - PVC- (black) - Diecast Backshells: zinc, grommets PVC (black). * Ethernet Backshells: Diecast zinc, grommets - PVC (black). 4 Plastic Metallized Ethernet Straight Diecast Ethernet Right-Angle Call Toll Free: 1 (800) 323-9612 4-82 35 belfuse.com/cinch D-subminiature D-SUBMINIATURE - TWO-PIECE Backshells -BACKSHELLS Two-Piece D*H Series D*H SERIES INDUSTRIAL Straight (180) Standard Backshells Straight (180) Standard Backshells Plastic and Metallized Plastic Backshells Plastic and Metallized Plastic Backshells Dimensions Dimensions Shell Shell Size E A Size in A 1.225 E A in 1.540 mm B 2.090 31.12 C1.225 2.730 D1.540 2.645 39.12 A B C D mm in mm in mm in mm B 1.547 39.29 C 0.640 16.26 D0.645 16.38 31.12 39.12 1.516 0.640 0.645 in mm 38.51in mm 16.26in mm 16.38 in 53.09 1.655 42.04 0.710 18.03 0.645 16.38 1.547 39.29 0.640 16.26 0.645 16.38 69.34 1.830 46.48 0.906 23.01 0.645 16.380.400 67.18 1.855 0.940 1.516 38.51 41.12 0.640 16.26 23.88 0.645 0.750 16.38 19.050.400 E F in mm in mm E F 0.400 10.16 0.984 24.99 0.400 mm10.16 in 1.312mm33.32 0.522 13.26 1.857 47.17 10.16 24.99 0.725 18.42 0.984 2.500 63.50 0.725 18.42 1.312 2.406 61.11 10.16 33.32 B 2.090 53.09 1.655 42.04 0.710 18.03 0.645 16.38 0.522 13.26 1.857 47.17 C 2.730 69.34 1.830 46.48 0.906 23.01 0.645 16.38 0.725 18.42 2.500 63.50 D 2.645 67.18 1.855 41.12 0.940 23.88 0.750 19.05 0.725 18.42 2.406 61.11 36 4-83 Call Toll Free: 1 (800) 323-9612 D-subminiature D-SUBMINIATURE BACKSHELLS Backshells - Two-Piece - TWO-PIECE D*H SERIES D*H Series INDUSTRIAL EMI/RFI Shielded Diecast Backshells EMI/RFI Shielded Diecast Backshells 9 and 15 Position 25 Position 37 and 50 Position 4 Dimensions A Shell Size in Dimensions Shell mm Size E31.12 E 1.225 A 1.540 B 2.090 A B39.12 C 53.09 D C 2.730 69.34 D 2.624 in in A B mm mm in B C C in mm mm in 0.620 15.75 1.225 37.21 1.465 31.12 37.211.465 0.620 1.540 39.12 1.600 40.64 1.600 53.09 40.641.570 0.620 2.090 39.88 2.730 69.34 1.810 45.97 1.570 66.65 39.881.800 0.690 2.624 45.72 1.810 0.620 15.75 0.690 0.862 17.53 0.862 D E D E mm inmm mm in in mm 0.620 10.16 15.7515.75 0.4000.400 10.16 mmin 15.75 0.620 15.75 0.620 17.53 21.89 0.620 21.89 0.620 15.75 0.400 10.16 15.7515.75 0.4000.525 10.16 0.620 13.34 0.620 15.75 0.725 18.42 15.7518.54 0.5250.725 13.34 0.730 18.42 in in 0.984 0.984 F F mm mm 1.857 2.406 24.99 24.99 33.32 33.32 47.17 63.50 47.17 61.11 1.312 1.312 1.857 2.500 45.97 0.862 21.89 0.620 15.75 0.725 18.42 2.500 63.50 66.65 Information 1.800 45.72 Ordering 0.862 21.89 0.730 18.54 0.725 18.42 2.406 61.11 D*H Two-Piece Backshells Ordering Information Fits Shell Standard D*H Two-Piece Backshells Size Density Shell Size E Fits Standard Density A Fits HTD 1.5 Density 9 Cable Entry 15 15Style 26 B 25 44 C 37 62 50 N/A E 9 A 15 B 25 Straight (180) C 37 Straight (180) D Straight (180) Straight (180) Cable Entry Style Plastic Straight (180) Cable DPH-E-001 RoHS Dia. Straight (180) DPH-A-001 Compliant (in) Straight (180) DPH-B-001 Plastic Straight (180) DPH-E-003 Straight (180) Metallized Plastic Cable Dia. (in) .210-.320 DCH-E-001Cable .210-.350 RoHS Compliant Dia. .210-.320 DCH-A-001 .210-.350 Metallized (in) .230-.450 .230-.450 PlasticDCH-B-001 DPH-C-001 .350-.650 DCH-C-001 .350-.640 DPH-D-001 .350-.650 DCH-D-001 .350-.640 .210-.320 .210-.320 Diecast Metal Cable Dia. (in) DMH-E-001 Diecast .210-.320 Cable Dia. DMH-B-001 .230-.450 DMH-C-001 .350-.650 DMH-D-001 .350-.640 DMH-A-001 Metal DCH-E-003 .210-.350 DMH-E-003 DMH-A-003 .210-.320 (in) .210-.320 DCH-A-003 .210-.350 .230-.450 DCH-B-003 .230-.450 .230-.450 .350-.650 DCH-C-003 .350-.640 .350-.650 Call Toll Free: 1 (800) 323-9612 DPH-B-003 Cable Dia. (in) 4-84 .210-.320 belfuse.com/cinch 37 D-subminiature Backshells - Super D SDH Series D-SUBMINIATURE BACKSHELLS - SUPER D SDH SERIES INDUSTRIAL Features FEATURES The Cinch D Interconnection System is afast, simple, fast, economical, wayconnectors for TheCinch Super Super D Interconnection System is a simple, economical, and reliableand wayreliable for mating mating from cable to cable or cable to panel. from cable to connectors cable or cable to panel. Snap-on Super D plastic hoods captivate connectors providing positive, self-latching, audible Snap-on Super D plastic hoods captivate providing self-latching, audible mating with reliable mating with reliable retention and connectors Latch-N-Lock quick positive, release disconnect. retention and Latch-N-Lock quick release disconnect. Snap-on Super-D plastic hoods are also available with filler ends to utilize 4-40 mounting hardware. Snap-on Super-D plastic hoods are also available with filler ends to utilize 4-40 mounting hardware. Super D hoods are available: Straight (180)accommodate or Right-Angle (90) cable metal entry.shell IDC, solder cup, or crimp and poke D-subminiature Black -SDH backshells any standard Sizes: 9, 15, 25, and 37. connector. - Sizes 15, 25, and 37 are available in standard or large cable openings. Gray accommodate the Cinchany All-Plastic IDC T-Series on page 15.crimp SDH Blackbackshells SDH backshells accommodate standard metal shellconnector IDC, solder cup, or and poke D-subminiature connector. Each Super-D plastic hood includes a stay band to strain relief the cable wire. Stay band tool SD-MSBT is Gray SDH backshells accommodate the Cinch All-Plastic IDC T-Series connector on required. pages 4-38 thru 4-39. Each Super-D plastic hood includes a stay band to strain relief the cable wire. Stay band tool SD-MSBT is required. Extra stay bands are available on page 4-90. Materials oxide - blackoxide for metal Hood Hood: Modified phenylene Modified phenylene - black for metal shell connectors or gray for all-plastic IDC connectors MATERIALS shell connectors or gray Diecast zincfor all-plastic IDC connectors Screws for Latching Blocks Steel with nickel plating Latch Block: Diecast zinc Stay Band Steel with zinc plating and clear chromate finish Screws for Latching Blocks: Steel with nickel plating Stay Band: Steel with zinc plating and clear chromate finish Latch Block Call Toll Free: 1 (800) 323-9612 4-86 38 D-subminiature D-subminiature Backshells - For -use MetalMetal Shell Shell Connectors Backshells Forwith use with Connectors SDH Series D-SUBMINIATURE INDUSTRIAL SDH Series BACKSHELLS - FOR USE WITH METAL SELL CONNECTORS SDH SERIES Straight (180) Cable Entry Black Backshells for Metal Shell Connectors Straight Straight (180) Cable EntryEntry Black Backshells for Connectors (180) Cable Black Backshells forMetal Metal Shell Shell Connectors Adapter Hood with Latches Adapter Hood with Latches Adapter Hood with Filler Ends Adapter Hood with Filler Ends Right-Angle (90) Entry Black Backshells for Metal Connectors Right-Angle (90)Cable Cable Entry Black Backshells forShell Metal Shell Connectors Right-Angle (90) Cable Entry Black Backshells for Metal Shell Connectors 4 Right-Angle Adapter Hood Right-Angle Adapter Hood Dimensions Dimensions Dimensions A .020" (.58mm) Positions mm A +in.020" (.58mm) A + .020" mm 37.34 in 1.47 37.34 9 1.80 1.47 45.72 1.80 45.72 15 2.35 1.80 59.69 2.35 59.69 25 2.35 2.99 75.95 2.99 75.95 37 2.99 in 9PositionsPositions 1.47 9 15 15 25 25 37 37 B .020" (.58mm) in mm B +.020" (.58mm) (.58mm) B +.020" in mm .31 7.87 mm in .31 7.87 37.34.31 .31 7.87 .31 7.87 45.72.33 .31 8.40 .33 8.40 59.69 .33 .37 9.40 .37 9.40 75.95 .37 C .020" (.58mm) D .020" (.58mm) E .020" (.58mm) in mm in mm in C +.020" (.58mm) D +.020" (.58mm) E+.020" (.58mm) C +.020" (.58mm) D +.020" (.58mm) inmm in mm49.21 in 1.94 1.25 mm in mm in mm 1.94 49.21 1.25 7.87 .41 - 10.41 1.9457.15 49.21 1.34 2.25 .41 10.41 2.25 57.15 1.34 7.87 .47 .4111.94 10.41 2.94 2.2574.61 57.15 1.50 .47 11.94 2.94 74.61 1.50 8.40 .47 11.94 2.94 74.61 .50 12.70 3.59 91.28 1.53 .50 12.70 3.59 91.28 9.40 .50 12.70 3.59 91.28 1.53 4-87 39 4-87 mm (.58mm) E+.020" (.58mm) mm 31.75 in mm 31.75 1.2534.1331.75 34.13 1.34 34.13 38.1038.10 1.50 38.10 38.8938.89 1.53 38.89 Call Toll Free: 1 belfuse.com/cinch (800) 323-9612 Call Toll Free: 1 (800) 323-9612 Standard Positions Cable Opening 9 SDH-9BL 15 SDH-15BL 25 SDH-25BL 37 SDH-37BL Large Cable Opening N/A SDH-15BLL SDH-25BLL SDH-37BLL Standard Cable Opening SDH-9BF SDH-15BF SDH-25BF SDH-37BF Large Cable Opening N/A SDH-15BFL SDH-25BFL SDH-37BFL D-SUBMINIATURE BACKSHELLS - FOR USE WITH METAL SHELL CONNECTORS SDH SERIES Standard Cable Opening SDH-9BFCS SDH-15BFCS SDH-25BFCS SDH-37BFCS Large Cable Opening N/A SDH-15BFLCS SDH-25BFLCS SDH-37BFLCS INDUSTRIAL Right-Angle (90) Cable Entry Black Backshells for Metal Shell Connectors Ordering Information Ordering Information Straight (180) Cable Entry Black Backshells for Metal Shell Connectors 4 Latches Standard Cable Large Cable (RoHS) Latches Positions Opening Opening Positions Standard Cable Opening 9 SDH-9RBL N/A 9 15 SDHH-9BL SDH-15RBL SDH-15RBLL 15 25 SDHH-15BL SDH-25RBL SDH-25RBLL 25 37 SDHH-25BL SDH-37RBL SDH-37RBLL Latching Blocks Blocks for Adapter System Latching forSuper SuperD D Adapter System Ordering Information Ordering Information Description Description Latching Block Latching LatchingBlock Block with SEM Screws Removable Mounting Latching Block with SEMScrews Screws for Adapter Hood Removable Mounting Screws for Latching Block with SEM Screws Adapter Hood Latching Block with SEM Screws Qty Required For Panel Qty Required Per SDH ForThickness Panel ThicknessQty per pack Qty per pack Per SDH Hood Hood N/A N/A Up to .060" Up to .060" N/A N/A .060" to .080" .080" to .125" Latching Block with SEM Screws .060" to .080" Latching Block with SEM Screws .080" to .125" 1 each 1 each 2 each 2 each 2 2each each 2 each 2 each 1 each 1 each 2 each 2 each each 2 2each 2 each 2 each 2 each 2 each 2 each Call Toll Free: 1 (800) 323-9612 4-88 40 2 each Catalog Number Catalog Number SD-LB SD-LB SD-LB-060 SD-LB-060 4-40UNC2AX3/4 4-40UNC2AX3/4 SD-LB-060-080 SD-LB-125 SD-LB-060-080 SD-LB-125 D-subminiature D-SUBMINIATURE BACKSHELLS - GRAY WITH Backshells - Gray with All-Plastic Connectors ALL-PLASTIC CONNECTORS SDH SERIES SDH Series * INDUSTRIAL Fits only T Series All-Plastic IDC connector on page 14. Fits only T Series All-Plastic IDC connector on pages 4-38 thru 4-39. Straight (180) Cable EntryBackshells Gray Backshells for All-Plastic Straight (180) Cable Entry Gray for All-Plastic ConnectorsConnectors Dimensions Dimensions Positions 9 Positions 15 9 25 15 37 A +.020" (.58mm) (.58mm) inA .020" mm 1.47in 37.34 mm 1.80 45.72 1.47 37.34 2.35 59.69 1.80 45.72 2.99 75.95 B +.020" (.58mm) B .020"mm (.58mm) in .31in 7.87mm .31 7.87 .31 7.87 .33 8.40 .31 .37 9.407.87 C +.020" (.58mm) C .020"mm (.58mm) in ---in --- mm .41 10.41 .47 11.94 10.41 .50.41 12.70 25 2.35 59.69 .33 8.40 .47 11.94 37 2.99 75.95 .37 9.40 .50 12.70 4 Ordering Information Ordering Information Straight (180) Cable Entry Gray Backshells for All-Plastic Connectors Latches Filler Ends Straight (180) Cable Entry Gray Backshells for All-Plastic Connectors Standard Positions Cable Opening 9 15 Positions 25 37 9 15 Large Cable Opening Standard Cable Opening Filler Ends SDH-9GL Latches N/A SDH-9GF SDH-15GL SDH-15GLLStandard Cable SDH-15GF Standard Cable Opening Opening SDH-25GL SDH-25GLL SDH-25GF SDH-9GL SDH-9GF SDH-37GL SDH-37GLL SDH-37GF Large Cable Opening Filler Ends w/4-40 Screws Standard Large Cable Opening Cable Opening Filler Ends w/4-40 Screws N/A SDH-9GFCS SDH-15GFL Large Cable OpeningSDH-15GFCS SDH-25GFL SDH-25GFCS N/A SDH-37GFL SDH-37GFCS SDH-15GL SDH-15GF 25 SDH-25GL SDH-25GF SDH-15GFLCS SDH-25GFLCS 37 SDH-37GL SDH-37GF SDH-37GFLCS N/A SDH-15GFLCS SDH-25GFLCS SDH-37GFLCS belfuse.com/cinch 4-89 41 Call Toll Free: 1 (800) 323-9612 Backshells - Gray use with All-Plastic Connectors ubminiature SDH Series ckshells - Gray use with All-Plastic Connectors D-SUBMINIATURE BACKSHELLS - GRAY USE WITH H Series ALL-PLASTIC CONNECTORS SDH SERIES INDUSTRIAL Right-Angle (90) Cable Entry Gray Backshells for All-Plastic Connectors * Fits only IDC connectors on pages 4-38 thru 4-39. Right-Angle Cable Entry Backshells for All-Plastic Connectors -Angle (90) Cable Entry(90) Gray Backshells for Gray All-Plastic Connectors s only IDC connectors on pages 4-38 thru 4-39. Fits only IDC connector on pages 15. Dimensions Dimensions nsions ons 4 A +.020" (.58mm) B +.020" (.58mm) C +.020" (.58mm) D +.020" (.58mm) Ain .020" (.58mm) B Cin .020" (.58mm) D in .020" (.58mm) Positions mm in.020" (.58mm) mm mm mm 9 1.94 49.21 .31 7.87 ---1.25 31.75 Positions in mm in mm in mm in mm A +.020" (.58mm) B +.020" (.58mm) C +.020" (.58mm) D +.020" (.58mm) 15 2.25 57.15 .31 7.87 .41 10.41 1.34 34.13 1.94 .31 31.75 in9 mm in 49.21mm in 7.87 mm in - mm 1.25 25 2.94 74.61 .33 8.40 .47 11.94 1.50 38.10 1.94 49.21 2.25 .31 57.157.87 -- 7.87 --1.25 10.4131.75 1.34 1537 .31 .41 34.13 3.59 91.28 .37 9.40 .50 12.70 1.53 38.89 2.25 57.15 .31 7.87 .41 10.41 1.34 34.13 25 .33 38.10 2.94 74.61 2.94 .33 74.618.40 .47 8.4011.94 .47 1.50 11.9438.10 1.50 37 3.59 91.28 .37 9.40 .50 12.70 1.53 38.89 3.59 91.28 .37 9.40 .50 12.70 1.53 38.89 Ordering Information Right-Angle (90) Cable Entry Gray Backshells for All-Plastic Connectors Ordering Information ring Information Right Angle (90) Entry for Gray Backshells for All-Plastic Connectors Latches -Angle (90) Cable Entry GrayCable Backshells All-Plastic Connectors Standard Cable Large Cable Positions Opening Opening Latches Latches 9 SDH-9RGL N/A Positions Standard Cable Opening Standard Cable Large Cable SDH-15RGL SDH-15RGLL ons Opening Opening 9 15 SDH-9RGL 25 SDH-25RGL SDH-25RGLL SDH-9RGL N/A 15 SDH-15RGL 37 SDH-37RGL SDH-37RGLL SDH-15RGL SDH-15RGLL 25 SDH-25RGL SDH-25RGL SDH-25RGLL 37 SDH-37RGL SDH-37RGL SDH-37RGLL Ordering Information Ordering Information Accessories for Gray Backshells ring Information Accessories for Gray Backshells Optional Additional ssories for Gray Backshells Positions Strain Reliefs* Stay Bands** Positions Optional Strain Reliefs* Additional Stay Bands** 9 SD-WC9 SD-9-15-SB Optional AdditionalSD-WC9 9 15 SD-9-15-SB SD-WC15 SD-9-15-SB ons Strain Reliefs* Stay Bands** SD-WC25SD-WC15SD-25-37-SB SD-9-15-SB 1525 SD-WC9 SD-9-15-SB 37 SD-WC37 SD-25-37-SB 25 SD-WC25 SD-25-37-SB SD-WC15 SD-9-15-SB SD-WC25 SD-25-37-SB 37 SD-WC37 SD-25-37-SB * Two each required per backshell. SD-WC37 SD-25-37-SB ** Stay band tool #SD-MSBT required. See page 4-100.. * Two each required per backshell. each required per backshell. ** Stay band tool #SD-MSBT required. Screw for screwlocking assembly - (2 each required): 4-40UNC2AX3/4. band tool #SD-MSBT required. See pageconnector 4-100.. Screw for screwlocking connector assembly -(2 each required): 4-40UNC2ZX3/4. See page 4-85 for latch block drawing. for screwlocking connector assembly - (2 each required): 4-40UNC2AX3/4. ge 4-85 for latch block drawing. Call Toll Free: 1 (800) 323-9612 Call Toll Free: 1 (800) 323-9612 4-90 4-90 42 MATERIALS ShellNut: Material: Zinc-plated with yellow Zinc-plated brasslow withcarbon yellowsteel chromate finish. chromate finish. Stop Clamp: Zinc-plated steel with yellow chromate finish. Straight Clamp Zinc-plated steel with yellow chromate finish. Screw: D-SUBMINIATURE JUNCTION SHELLS INDUSTRIAL Stop Nut: Zinc-plated brass with yellow chromate finish. Straight Clamp Materials Shell Material Zinc-plated low carbon steel with yellow chromate finish or RoHS clear chromate finish E Clamp Zinc-plated steel with yellow chromate finish Shell A Size Positions in mm Screw A 15 1.531 38.89 B Stop Nut 25 2.078 52.78E C 37 2.718 69.04 D 50 2.625 66.68 Shell A Size Positions in mm Round Clamp A 15 1.531 38.89 B 25 2.078 52.78 C 37 2.718 69.04 D 50 2.625 66.68 B C E in mm steel in mm chromate in mm Zinc-plated with yellow finish .500 12.70 1.312 33.32 .296 7.52 Zinc-plated with47.04 yellow chromate finish .500 12.70 brass 1.852 .296 7.52 .500 12.70 2.500 63.50 .296 7.52 .609 15.47 2.406 61.11 .390 9.91 B C E in mm in mm in mm .500 12.70 1.312 33.32 .296 7.52 .500 12.70 1.852 47.04 .296 7.52 .500 12.70 2.500 63.50 .296 7.52 .609 15.47 2.406 61.11 .390 9.91 Round Clamp F in mm .312 7.92 .796 20.22 .687 17.45 .687 17.45 F in mm .312 7.92 .796 20.22 .687 17.45 .687 17.45 in .640 .640 .640 .703 G mm 16.26 16.26 16.26 17.86 G in mm .640 16.26 .640 16.26 .640 16.26 .703 17.86 Round Clamp Shell A Size Positions in mm A 15 1.531 38.89 B Shell Size 25 2.078 52.78 Positions A 15 Right-Angle Clamp Shell A Size B A B Positions 25 in 15 1.531 25 2.078 B in mm A .500 12.70 in.500 12.70 mm 1.531 mm 38.89 52.78 in 2.078 .500 .500 C in mm B 1.312 33.32 1.852 47.04 in mm 38.89 .500 mm 52.78 in .500 B 12.70 12.70 1.312 1.852 D E F G in mm in mm in mm in mm C D E .406 10.31 .984 23.72 .125 3.18 1.031 26.19 .593 1.062 26.97 in 15.06 mm 1.515in 38.48mm .187 in4.75 mm in 12.70 1.312 mm 12.70 in 1.852 C 33.32 47.04 D .406 .593 33.32 .406 10.31 .984 23.72 .125 E F G mm mm 38.48 in mm 47.04 in .593 mm15.06 in 1.515 .187 10.31 .984 23.72 .125 3.18 1.031 26.19 15.06 1.515 38.48 .187 4.75 1.062 26.97 F G mm in mm 3.18 1.031 26.19 4.75 1.062 26.97 Right-Angle Clamp Right-Angle Clamp Shell A B Size Positions in mm in mm E 9 1.203 30.56 0.718 18.24 A 15 1.531 38.89 0.718 18.24 B 25 2.078 52.78 0.968 24.59 C 37 2.718 69.04 1.187 30.15 Shell A B D 50 2.625 66.68 1.250 31.75 Size Positions in mm in mm E 9 1.203 30.56 0.718A 18.24 A 15 1.531 38.89 0.718 18.24 Shell Size Positions in mm B 25 2.078 52.78 0.968 24.59 Call 12.718 (800)69.04 323-9612 CE Toll Free: 37 1.187 30.15 9 1.203 30.56 D 50 2.625 66.68 1.250 31.75 A 15 1.531 38.89 B 25 2.078 Call (800) 323-9612 C Toll Free: 137 2.718 D 50 2.625 C in mm .984 24.99 1.312 33.32 1.852 47.04 2.500 63.50 C 2.406 61.11 in mm .984B 24.99 1.312 33.32 in mm 1.852 47.04 4-92 2.500 63.50 0.718 18.24 2.406 61.11 E in mm .437 11.10 .437 11.10 .437 11.10 .437 11.10 E .562 in 14.27 mm .437 C11.10 .437 11.10 in mm .437 11.10 .437 11.10 .984 24.99 .562 14.27 F mm 11.10 11.10 15.88 20.62 F 23.01 mm H in mm .281 7.14 .437 11.10 .437 11.10 .468 11.89 .281 7.14 47.04 .437 11.10 .625 15.88 .468 11.89 .281 7.14 2.500 63.50 .437 11.10 .812 20.62 .468 11.89 .281 7.14 2.406 61.11 .562 14.27 .906 23.01 .531 13.49 .343 8.71 0.718 18.24 1.312 33.32 52.78 0.968 24.59 1.852 69.04 1.1874-92 30.15 66.68 1.250 31.75 G H in mm in mm .468 11.89 .281 7.14 .468 11.89 .281 7.14 .468 11.89 .281 7.14 .468 11.89 .281 7.14 G H .531 .343 in 13.49 mm in 8.71 mm E F .437 11.10 .468 11.89 .281 7.14 G .437 11.10 .468 11.89 .281 7.14 in mm in mm in mm .625 15.88 .468 11.89 .281 7.14 .812 20.62 .468 11.89 .281 7.14 .437 11.10 .437 11.10 .468 11.89 .906 23.01 .531 13.49 .343 8.71 in .437 .437 .625 .812 .906 in belfuse.com/cinch 43 D-subminiature D-subminiature Junction Shells D-subminiature Junction Shells D-subminiature Junction Shells D-SUBMINIATURE Junction ShellsJUNCTION SHELLS INDUSTRIAL Deep Straight Clamp Straight DeepDeep Straight Clamp Clamp Deep Straight Clamp Deep Straight Clamp F .015 F .015 Shell Size Shell E Size A E B A C B D C D Shell F .015 A A B B C C DD EE FF in in mm in in Emm in F mm in G mm Fmm .015 A B C Dmm Shell Size Positions mm in mm E in 9A mmin 1.203 30.56 12.29 24.99 9.53 .375 9.53 Size Positions Positions in inmm inmm in mm mm in .375 in Fmm mm in G mm B mm in .484 C mmin 0.984 Dmm in .578 E14.68 A 1.203 15 30.56 1.531 38.89 .484 12.29 1.312 33.32 .578 14.68 .713 18.11 .312 7.92 9 .484 12.29 0.984 24.99 .578 14.68 .375 9.53 .375 9.53 .750 19.05 Positions in mm in mm in mm in mm in mm in mm in mm Shell A B C D E F E 9 1.203 30.56 .484 12.29 .984 24.99 .578 14.68 .375 9.53 .375 9.53 15 9 A 25 15 Size Positions in 52.78 mm B 1.203 1.53125 38.89 2.078 30.56 .484 12.29 in 12.29 mm .484 1.312 33.32 0.984 24.99 in mm 1.852 47.04 .578 14.68 in 14.68 mm .578 .713 18.11 .375 9.53 in 25.40 mm 1.000 .312 7.92 .375 9.53 37 25 B 1569.04 1.531 38.89 .484 12.29 1.312 33.32.578.687 .578 14.68 .71325.40 18.11 .312 25.40 7.92 DA2.718 2.625 66.68 15.06 2.406 61.11 17.45 1.406 35.71 .406 10.31 .484 12.29 2.500 63.50 .578 14.68 1.375 34.93 .312 7.92 .312 1.000 2.07850 52.78 1.852 47.04 1.000 25.401.000 25 2.078 52.78 .484 .593 12.29 1.852 47.04 14.68 7.92 D 37 2.7182.718 69.0415.06 .484 .484 12.2961.11 2.5002.500 63.50 14.68 1.375 34.93 7.92 C2.625 3766.68 63.50.5781.406 .578 14.68 1.375 34.93 .312 .312 28.58 7.92 .593 69.04 2.406 12.29 .687 17.45 35.71 .406 10.31 1.125 D 50 2.625 2.625 66.68.593 .593 15.06 61.11.687 .687 17.451.406 1.40635.71 35.71 .406 .406 10.31 10.31 Switching Shell 50 66.68 15.06 2.4062.406 61.11 17.45 50 37 C 50 B2.625 2.718 2566.68 69.04 2.078 .593 15.06 .484 52.78 12.29 .484 2.406 61.11 2.500 12.29 63.50 1.852 .687 .578 47.04 17.45 14.68 .578 14.68 1.406 35.71 1.375 34.93 1.000 25.40 .312 25.40 7.92 .406 1.125 28.58 .312 10.31 7.92 1.000 Switching Shell Switching Shell Switching Switching ShellShell Shell Shell Size Size A A B B C C D D Shell Size A Positions Shell Size Shell Positions B 15 Size A 15 C 25 25 37DA B 37B 50 C 50C D D Fits Size Density Clamp Standard Straight Round Fits Standard Straight Round E 9 N/A Density Clamp Clamp ShellDensity Size Fits Standard Standard Round Clamp Shell Straight Clamp A9 15Clamp DA-19678-1 N/A N/A Density Size Density Clamp 9 N/A N/A B 25 DB-19678-2 15 DA-19678-1 DA-20961 E 9 N/A 15 DA-19678-1 DA-20961 C 37 DC-19678-3 25 DB-19678-2 DB-20962 E 9 N/A 15 DA-19678-1 25 DB-19678-2 DB-20962 DA 50 DD-19678-4 37 DC-19678-3 N/A A 15 B 25 37 DC-19678-3 DB-19678-2 50 DD-19678-4 N/A 37 DC-19678-3 50C N/A B 25 DD-19678-4 DB-20962 D 50 DD-19678-4 C HH in mm in 30.96 mm 1.219 1.250 H31.75 1.219 30.96 in 38.89 mm 1.531 1.250 38.89 31.75 1.219 30.96 1.531 1.250 31.75 1.656 42.06 1.531 38.89 1.531 38.89 1.531 38.89 38.89 1.531 1.656 1.656 42.06 42.06 A B C PositionsA in mm B B in mm C C in mm A A mm1.531 15 38.89 in in B mm .500 12.70 in C mm1.312 33.32 Positions in mm in mm in mm in mm2.078 A52.78 in mm .500 B1.312 in mm1.852 C47.04 25 12.70 1.531 38.89 .500 12.70 33.32 in mm in mm in mm 15 Positions 1.531 38.89 .500 12.70 1.312 33.32 1.531 38.89 1.312 33.32 37 2.718 69.04 12.70 47.04 2.500 63.50 2.078 52.78 .500 12.70.500 1.852 15 1.531 38.89 .500 12.70 1.312 33.32 2.078 52.78 .500 12.70 1.852 47.04 50 2.625 66.68 .609 15.47 2.406 61.11 69.04 52.78 25 2.718 2.078 .500 12.70 2.500 1.852 63.50 47.04 25 2.078 .609 52.78 15.47 12.70 61.11 2.718 69.04 .500 12.70.500 2.406 2.500 63.501.852 47.04 2.625 66.68 37 2.7182.718 69.0469.04 .500 12.70 12.70 2.500 63.50 37 2.625 66.68 .609 15.47.500 2.406 61.112.500 63.50 50 .609 15.47 2.406 61.11 50 2.6252.625 66.6866.68 .609 15.47 2.406 61.11 Ordering Information Ordering Information Ordering Information Junction Shells - Metal Ordering Information Ordering Information Junction Shells - Metal Junction Shells - Metal Fits Junction Shells - Metal Junction Shells - MetalStraight Shell Standard Fits Shell Shell Size Size E E A A B B C C D D in 19.05 mm .312 7.92 .750 15 1.531 38.89 .484 .484 12.29 1.312 33.32 14.68 7.92 1.203 30.56 .484 12.29 0.984 24.99.578.578 .578 14.68 .37518.11 9.53 .312 .375 19.05 9.53 CE2.078 2.718 69.04 12.29 2.500 63.50 14.68 1.375 34.93 .312 7.92 .484 12.29 1.852 47.04 .578 14.68 1.000 25.40 .713 1.000 25.40 1.53137952.78 38.89 1.312 33.32 .713 18.11 .312 7.92 .750 GG in Hmm in mm .750 19.05 in H mm .750 19.05 1.219 30.96 in mm G .750 19.05 in 25.40 mm 1.000 1.250 31.75 1.219 30.96 .750 19.05 .750 25.40 19.05 1.000 1.531 38.89 1.250 31.75 .750 19.05 1.125 28.58 1.531 38.89 1.000 25.40 1.000 1.656 25.40 42.06 1.531 38.89 1.000 25.40 1.000 1.656 25.40 42.06 1.125 1.125 28.58 28.58 37 N/A Round Right-Angle Deep Straight Switching Clamp Clamp Shell Right-Angle Deep Straight Clamp Switching Yellow Chromate RoHS Clear Chromate Right-Angle Deep StraightDE-24657 Switching N/A N/A Clamp DE-19977-5 Clamp Shell Right-Angle Deep Straight Shell Right-Angle Deep Straight Round Right-Angle Deep Straight Switching Clamp DA-19977-1 Clamp Switching Shell DA-20961 DA-24658 DA-19678-6 DE-19977-5 DE-24657 N/A Clamp Clamp Clamp Clamp Clamp Clamp Clamp Shell DE-19977-5 DE-24657 N/A DB-20962 DA-19977-1 DB-19977-2 DA-24658 DB-24659 DA-19678-6 DB-19678-7 N/A DE-19977-5 DE-24657 N/A DA-19977-1 DA-24658 DA-19678-6 N/A DC-19977-3 DC-24660 DC-19678-8 DB-19977-2 DB-24659 DB-19678-7 DE-19977-5 DE-24657 N/A DE-19977-30 DE-24657-30 DA-20961 DA-19977-1 DA-24658 DA-19678-6 DB-19977-2 DB-24659 DD-24661 DB-19678-7 DD-19678-9 N/A DD-19977-4 DC-19977-3 DC-24660 DC-19678-8 DA-19977-31 DA-24658-31 DB-20962 DB-19977-2 DB-24659 DC-19977-3 DA-24658 DC-24660 DA-19678-6 DC-19678-8 DB-19678-7 DD-19977-4 DD-24661 DD-19678-9 N/A DC-19977-3 DC-24660 DD-19977-4 DD-24661 DB-19678-7 DD-19678-9 DC-19678-8 DB-19977-2 DB-24659 DB-19977-32 DB-24659-32 N/A DD-19977-4 DD-24661 DD-19678-9 DC-24660 4-93 4-93 4-93 44 4-93 DC-24660-33 Call Toll Free: 1 (800) 323-9612 Call Toll Free: 1 (800) 323-9612 Call Toll Free: 1 (800) 323-9612 Call Toll Free: 1 (800) 323-9612 D-SUBMINIATURE PLASTIC HOODS Shell Size A B Positions in 15 1.297 25 1.406 A mm 32.94 35.71 in 1.219 1.797 B mm 30.96 45.64 in .266 .328 C mm 6.76 8.33 in 1.312 1.852 D mm 33.32 47.04 INDUSTRIAL E in mm 1.641 41.68 2.203 55.96 All-Plastic Straight (180) Hood All-Plastic Straight (180) Hood Shell Material: Nylon (gray). Shell Material: Nylon (gray). #4-40 Steel with with nickel nickel plating. plating. #4-40Screws: Screws: Steel Connector Not Included Shell A Size Positions in mm Positions EShell Size9 1.218 30.94in AE B A B 15 25 91.546 2.093 15 A in mm 1.000 B mm in 25.40 38.27 1.218 1.000 30.94 25.40 1.000 53.16 1.250 31.75 1.546 38.27 1.000 25 2.093 53.16 1.250 B C D E F C D E F in mm in mm in mm in mm in mm in mm.500 in .984 23.72 12.70 mm.562 in14.27 mm.281 in 7.14 mm.218 1.312 .984 33.32 23.72 .500 .500 12.70 12.70.562 .562 14.27 14.27.360 .2819.14 7.14.360 25.40 1.852 47.04 .500 12.70 .562 14.27 .493 12.52 .360 25.40 1.312 33.32 .500 12.70 .562 14.27 .360 9.14 G G mm in 7.14 mm 9.14 7.14 .218 9.14 .360 9.14 31.75 .360 1.852 47.04 .500 12.70 .562 14.27 .93 12.52 9.14 All-Plastic Right-Angle (90) Hood Shell Material: Nylon (gray). #4-40 Screws:Information Steel with nickel plating. Ordering Plastic Hoods Connector Not Included Shell Size Standard Shell A Size PositionsDensity in mm A 15 1.822 46.28 E 9 B 25 2.368 60.15 A 15 B 25 Ordering Information Straight B Hoodin mm 1.000 25.40 DE-51218-1 1.250 31.75 DA-51210-1 in 1.312 1.852 C mm 33.32 47.04 in .500 .500 D mm 12.70 12.70 E in mm .562 14.28 .562 14.28 in .360 .360 F mm 9.14 9.14 DB-51212-1 Plastic Hoods Shell Size E A B C D Standard Density 9 15 25 37 50 Phenolic Hood N/A DA-51225-1 DB-51226-1A N/A N/A Call Toll Free: 1 (800) 323-9612 Straight Hood DE-51218-1 DA-51210-1 DB-51212-1 N/A N/A Right Angle N/A DA-51211-1 DB-51213-1 N/A N/A 4-94 belfuse.com/cinch 45 D-subminiature D-SUBMINIATURE ACCESSORIES Accessories INDUSTRIAL Dust Caps Dust Caps For use with all Cinch D-subminiature connectors. * For use with all Cinch D-subminiature connectors. Used to protect connector contacts notmated. mated. * Used to protect connector contactswhen when connector connector isisnot * Made of polyethylene (black). Made of polyethylene (black). Ordering Information Ordering Information Fits Shell Size Fits Shell Size E E E A A E B A B C A C D B D B C Fits Fits Standard Standard Density Catalog No. Description in 9 DE-59-20 Socket .694 Density Catalog No. Description 9 DE-60-20 Plug .749 915 DE-59-20Socket Socket 1.022 DA-59-20 DA-60-20 1.077 915 DE-60-20 PlugPlug 25 DB-59-20 Socket 1.562 15 DA-59-20 PlugSocket 1.635 25 DB-60-20 37 DC-59-20 Socket 2.210 15 DA-60-60 Plug 37 DC-60-20 Plug 2.283 50 DD-59-20 25 DB-59-20Socket Socket 2.116 50 DD-60-20 Plug 2.179 25 DB-60-20 Plug mm in 17.63 19.02 .694 25.95 27.36 .749 39.67 1.022 41.52 56.13 1.077 57.99 53.75 1.562 55.35 1.635 in mm .627 .682 17.63 .955 1.010 19.02 1.495 25.95 1.568 2.143 27.36 2.216 2.049 39.67 2.112 41.52 B B mm in 15.93 17.32 .627 24.25 25.65 .682 37.97 .955 39.83 54.43 1.010 56.29 52.04 1.495 53.64 1.568 C inmm mm .362 9.19 .412 10.46 15.93 9.19 .362 .412 17.3210.46 .362 9.19 24.2510.92 .430 .362 9.19 25.65 .430 10.92 .474 37.9712.04 .536 13.61 39.83 D D mm mm 7.49 8.76 9.19 7.49 8.76 10.46 7.49 9.19 9.22 7.49 10.46 9.22 10.34 9.19 11.91 10.92 in mm .295 7.49 .345 8.76 .295 7.49 .345 8.76 .295 7.49 .365 9.22 Socket 2.210 56.13 2.143 54.43 .362 9.19 .295 7.49 DC-60-20 Plug 2.283 57.99 2.216 56.29 .430 10.92 .363 9.22 DD-59-20 Socket 2.116 53.75 2.049 52.04 .474 12.04 .407 10.34 50 female guide DD-60-20 55.35 2.112connectors. 53.64 .536 13.61 .469 Male or plates will Plug accommodate2.179 Cinch male or female Plate: Cold-rolled steel with cadmium plating and yellow chromate finish. Guide pin (male): Stainless steel, passivated. Screws, rivets (male plate), washers (male plate): Steel with cadmium plating and yellow chromate finish. 11.91 C D 50 * Aligns connectors before actual mating. Generally used in blind mate applications. * * * * C in in .295 .345 .362.295 .412.345 .295 .362.363 .295 .412 .363 .362.407 .469 .430 DC-59-20 37 Guide Pin Plates 37 D A A Socket Plug Ordering Information Fits Shell Standard Size Density A Plug Socket N/A N/A in mm in B mm C in D mm in F mm in mm in G mm K in mm E 9 A 15 DA-22213 DA-22214 2.281 57.93 1.000 25.40 1.312 33.32 .750 19.05 .898 22.81 1.663 42.24 1.906 48.41 B 25 DB-22255 DB-22254 2.820 71.63 1.000 25.40 1.852 47.04 .750 19.05 1.168 29.67 2.203 55.96 2.446 62.13 C 37 DC-22070 DC-22071 3.468 88.09 1.000 25.40 2.500 63.50 .750 19.05 1.492 37.90 2.851 72.42 3.094 78.59 D 50 DD-21962 DD-21961 3.375 85.73 1.125 28.58 2.406 61.112 .874 21.88 1.437 36.50 2.749 69.82 3.000 76.20 Call Toll Free: 1 (800) 323-9612 46 4-96 D-subminiature Accessories D-SUBMINIATURE ACCESSORIES INDUSTRIAL Slide Lock Assemblies Slide Lock Assemblies A slide lock assembly is a metal bracket offered with hardware necessary to mount into the standard connector *mounting A slide lock assembly is a metal bracket offered with hardware necessary mount into thetwo standard holes. It consists of the lock retainer plate, two screws, twotowashers, and nuts. connector Two lock posts are mounting holes. It consists of the lock retainer plate, two screws, two washers, and two nuts. Two lock posts are required to fit into the mounting holes of the mating connector. These must be ordered separately. required to fit into the mounting holes of the mating connector. These must be ordered separately. Compatiblewith withall all Cinch Cinch Backshells, andand Junction Shells except D*H Series, SDH Series, and phenolic hood. *Compatible Backshells,Hoods, Hoods, Junction Shells except D*H Series, SDH Series, and phenolic *hood. Compatible with all Cinch metal shell D-subminiature connectors. Compatible with all Cinch metal shell D-subminiature connectors. Materials Materials * Slide Lock Plate: Stainless steel, passivated. Slide Stainless steel, passivated. * Lock Slide Plate lock hex nut, washer #4-40 screw: Steel with zinc plating and yellow chromate finish. Slide Hex Nut, Steel withand zinchex plating yellow chromate finish and yellow chromate finish. * Lock Lockpost, washer, lockwasher, nut:and Steel with zinc plating Washer #4-40 Screw Lockpost, Washer, Lockwasher, and Hex Nut Steel with zinc plating and yellow chromate finish 4 .145 Consists of Lock Retainer and two lock posts (order separately). NOTE: Not compatible with D*H Series or SDH Series backshells. Consists of Lock Retainer and two lock posts (order separately). NOTE: Not compatible with D*H Series or SDH Series backshells. Ordering Information A Ordering Information Fits Standard Fits Shell Size E A B C D Shell Size E A B C D Density Fits 9 Standard 15 Density 25 9 3715 25 50 37 50 in B mm in C mm in mm 0.984 24.99 mm1.312 24.99 1.852 33.27 2.500 47.04 2.406 63.50 62.48 33.27 Lock Retainer DE-51224-1 Lock DA-51220-1 Retainer DE-51224-1 DB-51221-1 DA-51220-1 DC-51222-1 DB-51221-1 DD-51223-1 DC-51222-1 DD-51223-1 1.442 1.770 in 1.442 2.293 1.770 2.958 2.293 2.847 2.958 2.847 A 36.63 mm44.96 36.6358.24 44.9675.13 58.24 72.31 75.13 72.31 in .500 .500 .500 .500 .609 B.500 .500 mm 12.70 .500 12.70 .500 12.70 .609 12.70 15.47 12.70 12.70 in 0.984 12.70 1.312 12.70 1.852 15.47 2.500 2.406 C 47.04 63.50 62.48 Lock Post: #D53018. Two (2) required with each Slide Lock Assembly. Lock Post: #D53018. Two (2) required with each Slide Lock Assembly. 4-97 47 Call Toll Free: 1belfuse.com/cinch (800) 323-9612 D-SUBMINIATURE HARDWARE ACCESSORIES INDUSTRIAL D-subminiature Hardware Screwlocks Accessories Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/ panel. Screwlocks may be used on plugs or sockets. Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate Screwlocks different panel thicknesses, one lockwasher, and one #4-40 nut. Military female screwlocks include three flat washers. are designed to retain the same size mated connectors together or to secure the connector to a rack/panel. * Screwlocks Screwlocks may be used on plugs or sockets. * * Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate different panel various connector flange sizes and#4-40 types of Military backshells or screwlocks hoods (if applicable). thicknesses, one lockwasher, and one nut. female include three flat washers. Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the various connector flange sizes and types of backshells or hoods (if applicable). * Two screwlocks are required connector. Military screwlocks meet per all requirements of MIL-C-24308. * Military screwlocks meet all requirements of MIL-C-24308. Two screwlocks are required per connector. Materials Materials Commercial Screwlock Assemblies Commercial Screwlock Assemblies: Male Screwlock Assembly Clip and screw are steel with zinc plating and yellow chromate finish - RoHS has clean chromate finish * Female Male Screwlock and screw are steel with zinc and plating yellow chromate finish. Screwlock Assembly: Assembly Clip Washers (2), lockwashers, hex nuts, nutsand are steel with zinc plating and yellow chromate finish * Female Screwlock Assembly: Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating and yellow chromate finish. 4 M24308 Military Screwlock Assemblies: * M24308 Male Screwlock Assembly: Clip and screw are steel with cadmium plating and yellow chromate finish. Military Screwlock Assemblies * Female Screwlock Assembly: Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and Male Screwlock Assembly Clip and screw are steel with cadmium plating and yellow chromate finish yellow chromate finish. Female Screwlock Assembly Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and yellow chromate finish Female Female Screwlock Screwlock Male MaleScrewlock Screwlock 48 Accessories D-subminiature Accessories D-SUBMINIATURE ACCESSORIES * INDUSTRIAL Screwlock assemblies will not fit D*H or SDH Series backshells. Screwlock assemblies will not fit D*H or SDH Series backshells. Male Screwlocks * Screwlock assemblies will not fit D*H or SDH Series backshells. Male Screwlocks Male Screwlocks Ordering Information Ordering Information E Shell Size Positions A B Shell Size in mm Commercial: Ordering Positions Information D20419-46 0.250 56.35 A in0.250 mm 56.35 D20419-40 Shell Size Commercial: Positions D20419-0 0.250 56.35 56.35 D20419-0 0.250 A D20419-16 0.250 D20419-16 in0.250 56.35 mm 56.35 D20419-21 0.281 63.34 63.34 Commercial: D20419-21 0.281 D20420-0 D20419-0 0.250 56.35 D20420-0 0.250 63.34 56.35 D20420-12 0.281 D20419-16 0.250 56.35 D20420-15 0.281 D20420-12 0.281 63.34 63.34 D20419-21 D20420-0 0.250 D20420-42 0.281 56.35 63.34 Military MIL-C-24308: D20420-12 0.281 M24308/25-9F Per MIL 63.34 spec Military D20420-15 0.281 63.34 M24308/25-10F Per MIL spec MIL-C-24308 NOTE: P MIL-C-24308: = Plug, S= Socket Military M24308/25-9F Per MIL spec * Indicates use junction shell M24308/25-9F Perwith MIL spec A 9 15 mm E in 0.048 B in 0.033 mm 0.0330.033 0.84 B 0.048 1.22 in 0.048 mm 0.0590.059 1.50 0.033 0.84 0.033 0.048 1.22 0.0590.048 1.50 0.0330.048 0.84 0.048 1.22 0.059 1.50 1.22 9 S* 0.84 E 9 0.84 P/S P/S A 15 P/SP/S 0.84 1.22 25 B 25 C 37 P/S B CS 37 SS S* P/S* S* S* P* P/S S* P* 25 P/S S P/S* S* P* P* S P/S* P* P/S P/S P/S P/S P/S P/SP/S P/S P/S P/S P/S 1.22 S* 1.50 A 15 B P/S S* P* S P/S* D 37 50 RoHS P/S* X S X D 50 P/S* P/S* 1.22 M24308/25-10F Per MIL Perspec MIL spec M24308/25-10F D 50 C S P/S* S P/S* P* S P/S* P* P/S S P/S* P/S* X P/S P/S P/S Female NOTE: =Screwlocks Plug, S= Socket NOTE:P P=Plug, S=Socket * Indicates use with junction shell * Indicates use with junction shell Female Screwlocks Female Screwlocks Ordering Information Ordering Information A 15 B 15 25 C 25 37 D 50 C D 37 50 P/SA BP/S 25 P/S P/S P/S C P/S 37 P/SP/S P/S D P/S 50 P/S P/S P/S P/S X P/S 15 P/S P/S P/S P/S X 0.312 70.32 Per MIL spec Per MIL141.55 spec 0.628 Per MIL spec P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S Per MIL spec Per MIL spec P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S Ordering ShellSize SizeInformation Shell Positions Positions Commercial: Shell Size D20418-42 Commercial: Positions D20418-2 D20418-39 D20418-39 Military Commercial: MIL-C-24308 Military MIL-C-24308: D20418-2 M24308/26-1F M24308/26-1F D20418-39 M24308/26-2F M24308/26-2F Military MIL-C-24308: NOTE: = Plug, S= Socket NOTE:P P=Plug, S=Socket M24308/26-1F M24308/26-2F NOTE: P = Plug, S= Socket A in 0.312 in 0.6280.312 0.628 in A mm mm 70.32 A 70.32 141.55 141.55 mm Per MIL spec E E 9 9 E 9 P/S P/S 4-99 4-99 49 A P/S B P/S P/S RoHS P/S P/S Call Toll Free: 1 (800) 323-9612 belfuse.com/cinch Call Toll Free: 1 (800) 323-9612 4 4 Auto Clinch D is a semi-automatic, pneumatically powered, and electrically Designed totermination insert one 22-26 AWG wire attoa terminate time, Uni-Clinch D is used controlled machine designed IDC D-subminiature asconnectors. a field repair by field service programmer engineers. and a common nest for It tool employs a selective all four connector sizes and can be equipped to terminate metal shell Part No. SD-UC connectors. It can also be optionally equipped with remote visual color code display for training sequences. It has a provision for omission of wires. D-SUBMINIATURE IDC TERMINATION TOOLS INDUSTRIAL Uni-Clinch Auto-ClinchHand D Tool Insertion Tool Part No.: ACD-432 Certi-ClinchTM D Field Termination Tool *For 24-26 AWG Wire Super DTM Manual Stay Stay Band ToolTool Super DTM Manual Band for applying thestay steel stay band/strain to the cable before DesignedDesigned for applying steel reliefrelief the cable before Certi-Clinch Dthe is designed for band/strain mass termination oftoindividual wires, termination of wires to the connector, the manual Stay Band Tool applies both stay band sizes to the full range and of cable sizes. connector sizes, is readily portable, requires no set-up time and little eliminating stripping, soldering, and crimping. It handles four termination of wires wire to the connector, the manual Stay Band Tool all applies both stay band sizes to the full range of cable sizes. operator time. Rugged, all-metal construction affords trouble-free long life. Part No. SD-MSBT For metal shell IDC D-subminiature connectors. Part No. SD-MSBT Part No. SD-CCWN Certi-Clinch D Field Manual Tool Manual Tool For all-plastic IDC D-subminiature connectors. Termination Tool Part No. SD-CC NOTE: All termination tools on this page are used in conjunction with T* Series D-subminiature connectors. Conversion nest for converting all-plastic type to metal shell. Part No. SD-CCN Call Toll Free: 1 (800) 323-9612 4-100 TM Uni-Clinch D Single-Wire Insertion Tool Uni-ClinchTM D Single-Wire HandHand Insertion Tool to insert oneAWG 22-26wire AWG at a Uni-Cinch time, Uni-Clinch is used Designed Designed to insert one 22-26 atwire a time, D is D used as a a field repairservice tool by field service engineers. field repairastool by field engineers. Part No.: SD-UC Part No. SD-UC Uni-Clinch Hand Uni-Clinch Hand Insertion Insertion ToolTool Super DTM Manual Stay Band Tool Designed theused steel stay band/strain reliefD-subminiature to the cable connectors. before NOTE: All termination toolsfor onapplying this page are in conjunction with T* Series termination of wires to the connector, the manual Stay Band Tool applies both stay band sizes to the full range of cable sizes. Part No. SD-MSBT Manual Tool NOTE: All termination tools on this page are used in conjunction with T* Series D-subminiature connectors. Call Toll Free: 1 (800) 323-9612 4-100 50 D-SUBMINIATURE CRIMP AND POKE Crimp and Poke D-subminiature TOOLS TERMINATION Termination Tools INDUSTRIAL Positioner--A device when attached Metal Shell High-Reliability CrimpCrimp Metal Shell High-Reliability and Poke Termination Tool to a crimping tool that locates the and Poke Termination Tool M22520/2-01 M22520/2-01 Positioner -- contact in the correct position. Hand crimping tool for high-reliability Hand crimping tool for high-reliability machined D*U, Series 3, and M24308 machined D*U, Poke Series contacts. 3, and M24308 Crimp and Crimp and Poke contacts. Positioner for machined contacts M22520/2-01 D*U Series Positioner M22520/2-01 Part No.: 599-11-11-580 NOTE: Positionerrequired required with NOTE: Positioner with crimping tool Catalog No.: EP-580 crimping tool Series 3 and M24308 Connector Positioner Part No.: 598-98-97-618 Metal Shell Military Crimp and Poke Catalog No.: M22520/2-08 Insertion/Extraction Tool A device when attached to aFor crimping that locates the D*U, contact in the correct position. Crimp and Poke insertingtool or extracting machined D-subminiature D*U Series Positioner Crimp and Poke Termination Tools Termination Tools CIET-20-HD Series 3, or M24308 Crimp and Poke D-subminiature contacts. Positioner for machined contacts Part No.: CIET-20-HD Part No.: 599-11-11-580 Metal Shell High-Reliability Crimp Military Extraction Tip Tool Only Crimp and Poke Termination Metal Shell High-Reliability and Poke Termination Tool For extracting high-reliability machined Hand crimping tool for high-reliability Series 3 and M24308 Connector Positioner Catalog No.: EP-580 Part No.: 598-98-97-618 D*U, 3, or M24308 Crimp and Poke machined D*U, Series 3, and M24308 HandSeries crimping tool for high-reliability contacts. Crimp and Poke contacts. machined D*U, Series 3, and M24308 Part No.: M22520/2-01 Crimp andCET-20-11 Poke contacts. Catalog No.: M22520/2-08 M22520/2-01 NOTE: Positioner required with M22520/2-01 CET-20-11 M22520/2-01 crimping tool NOTE: Positioner required with crimping tool Positioner--A device when attached to a crimping tool thatwhen locates the Positioner--A device attached contact in the correct position. to a crimping tool that locates the contact in the correct position. Positioner for machined contacts D*U SeriesforPositioner Positioner machined contacts Part Series No.: 599-11-11-580 D*U Positioner Catalog EP-580 Part No.:No.: 599-11-11-580 Series 3 and M24308 Connector Positioner Catalog No.: Crimp EP-580 Ferrule Part No.: 598-98-97-618 Series 3 and M24308 Connector Positioner Catalog No.: M22520/2-08 Poke Insertion/Extraction Tool Part No.: 598-98-97-618 Metal Shell Military Crimp and Poke Metal Shell Military Crimp Coaxial and High-Voltage Contactand Insertion/Extraction Tool Metal ShellTool Military Crimp and Poke Catalog No.: M22520/2-08 Extraction Insertion/Extraction Tool For inserting or extracting machined D*U, For inserting or extracting machined D*U, Series 3, or M24308 Crimp and For extracting co-axial and high-voltage CIET-20-HD CET-C6BCIET-20-HD CIET-20-HD 4 Series 3,contacts. or M24308 Crimpmachined and PokeD*U, For inserting extracting Poke contacts fromor metal shell high-reliability contacts. Series 3, or M24308 Crimp and Poke connectors. Part No.: CIET-20-HD contacts. Part No.: CIET-20-HD Part Part No.: No.: CET-C6B CIET-20-HD Pneumatic Bench Top Military Extraction Tip Press Only for Crimping Ferrules Military Extraction Tip Only CET-20-11 FCT-551 CET-20-11 CET-20-11 Military Only For extractingExtraction high-reliabilityTip machined D*U, Series 3, or M24308 Crimp and Poke This lightweight, portable press is used For extracting high-reliability machined to crimp the ferrules on the overmold contacts. D*U, 3, or M24308 Crimp and machined Poke ForSeries extracting high-reliability D*U, shielding kits. Crimp dies Part No.: hardware CET-20-11 contacts. Poke contacts. ordered separately. Part No.: CET-20-11 Part No.: 599-11-11-551 Part No.: CET-20-11 Catalog Catalog No.: FCT-551 Coaxial and High-Voltage Contact Hand Tool for Crimping Ferrules Extraction Tool Coaxial and High-Voltage Contact and Coax Contacts Extraction For extractingTool co-axial and high-voltage Uses same crimp dies as pneumatic tool. contacts from metal shell For extracting co-axial andhigh-reliability high-voltage Part No.: 599-11-11-552 connectors. contacts from metal shell high-reliability Catalog No.: FCT-552 connectors. Part No.: CET-C6B CET-C6B FCT-552 CET-C6B Part No.: CET-C6B 51 for Pneumatic Bench Top Press Crimping Ferrules Pneumatic Bench Top4-103 Press for Number CF-51 CF-42 CF-43 CF-44 CF-45 CF-46 CF-47 CF-50 Series 3, or M24308 Crimp and Part Crimp Die CrimpType Ferrule Number Part No. 462-44-22-451 1 598-98-97-607 Crimp Ferrule 462-44-22-442 1 598-98-97-600 462-44-22-443 1 598-98-97-601 462-44-22-444 1 598-98-97-602 462-44-22-445 1 598-98-97-603 462-44-22-446 1 598-98-97-604 462-44-22-447 2 598-98-97-605 462-44-22-450 2 598-98-97-606 Crimp Die Catalog No. CD-07 CD-00 CD-01 CD-02 CD-03 CD-04 CD-05 CD-06 belfuse.com/cinch Call Toll Free: 1 (800) 323-9612 44 About Cinch Connectivity Solutions In operation since 1917, Cinch supplies high quality, high performance connectors and cables globally to the Aerospace, Military/Defense, Commercial Transportation, Oil & Gas, High End Computer, and other markets. We provide custom solutions with our creative, hands on engineering and end to end approach. Our diverse product offerings include: connectors, enclosures and cable assemblies utilizing multiple contact technologies including copper and fiber optics. Our product engineering and development activities employ cutting edge technologies for design and modeling, and our various technologies and expertise enable us to deliver custom solutions and products for our strategic partnerships. For more information, please contact us: North America +1 507.833.8822 ccsorders@us.cinch.com Asia-Pacific +86 21 5442 7668 ccs.asia.sales@as.cinch.com Europe, Middle East +44 (0) 1245 342060 CinchConnectivity@eu.cinch.com belfuse.com/cinch.com ca-CCS-IND-industrial-d-sub-catalog-07012019 (c) 2019 Cinch Connectivity Solutions