DC/DC Converter TEN 10 Series 10 Watt Features Wide 2 : 1 Input Range High Power Density Operating Temp. Range - 40C to +75C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Industry Standard Pinout Shielded Metal Case with insulated Baseplate High Reliability, MTBF >1 Mio. h 2 Year Product Warranty The TEN 10 series of DC/DC converters , comprising 24 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and a high efficiency. Models Ordercode TEN 10-1210 TEN 10-1211 TEN 10-1212 TEN 10-1213 TEN 10-1215 TEN 10-1221 TEN 10-1222 TEN 10-1223 TEN 10-2410 TEN 10-2411 TEN 10-2412 TEN 10-2413 TEN 10-2415 TEN 10-2421 TEN 10-2422 TEN 10-2423 TEN 10-4810 TEN 10-4811 TEN 10-4812 TEN 10-4813 TEN 10-4815 TEN 10-4821 TEN 10-4822 TEN 10-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 9 - 18 VDC 3,3 5 12 15 24 5 12 15 VDC VDC VDC VDC VDC VDC VDC VDC 2'400 2`000 830 670 415 1`000 415 330 mA mA mA mA mA mA mA mA 72 77 80 80 81 78 81 80 % % % % % % % % 18 - 36 VDC 3,3 5 12 15 24 5 12 15 VDC VDC VDC VDC VDC VDC VDC VDC 2`400 2`000 830 670 415 1`000 415 330 mA mA mA mA mA mA mA mA 76 78 82 82 83 80 82 82 % % % % % % % % 36 - 75 VDC 3,3 5 12 15 24 5 12 15 VDC VDC VDC VDC VDC VDC VDC VDC 2`400 2`000 830 670 415 1`000 415 330 mA mA mA mA mA mA mA mA 76 80 82 83 83 81 83 83 % % % % % % % % Page 1 DC/DC Converter TEN 10 Series 10 Watt Input Specifications Input current (no load) 12 Vin models 24 Vin models 48 Vin models Input current (full load) 12 Vin; 3.3 Vout models: 12 Vin; 5 & 5 Vout models: 12 Vin; other output models: 24 Vin; 3.3 Vout models: 24 Vin; 5 & 5 Vout models: 24 Vin; other output models: 48 Vin; 3.3 Vout models: 48 Vin; 5 & 5 Vout models: 48 Vin; other output models: Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) 30 mA typ. 20 mA typ. 10 mA typ. 12 Vin models 24 Vin models 48 Vin models 12 Vin models 24 Vin models 48 Vin models 915 mA typ. 1080 mA typ. 1045 mA typ. 435 mA typ. 530 mA typ. 510 mA typ. 215 mA typ. 260 mA typ. 250 mA typ. 8.5 VDC / 8 16.5 VDC / 16 32.5 VDC / 32 VDC VDC VDC 25 V max. 50 V max.. 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 1% Regulation - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 10 - 90 % - single output models - dual output models balanced load - dual output models unbalanced load 0.5 % max. 1 % max. 3 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient 0.02 % / C Output current limitation >110% of Iout max., constant current Short circuit protection Hiccup mode, indefinite (automatic recovery) Capacitive load 2200 F max. 470 F max. - single output models - dual output models General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 75 C (no derating) + 95 C max. - 40 C ... + 125 C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 C Isolation voltage Input/Output 1`500 VDC Isolation capacity Input/Output 120 pF typ Isolation resistance Input/Output (500 VDC) > 1`000 M Ohm All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 10 Series 10 Watt General Specifications Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM) Safety standards UL 1950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage(SELV limit) Savety approvals UL /cUL File E188913 Physical Specifications Case material Steel chrome-nickel plated Baseplate Epoxy Potting material Silicon rubber TES (flammability to UL 94V-0) Weight 30 g (1.2 oz) Soldering temperature max. 250 C / 10 sec. Outline Dimensions mm (inches) 50.8 0.5 5 Pin diameter o 1.0 0.05 (1.0 0.02) 25.4 0.5 (0.8) 20.32 6.0 10.2 0.5 2.5 0.5 Insulated baseplate (0.236) (0.402 0.02) 6 4 (0.4) 1 2 Pin-Out (0.4) (0.3) 3 Bottom View 10.16 10.16 (0.8) (0.098 0.02) 20.32 (0.6 0.02) (0.2) 15.2 0.5 2.5 0.5 (0.098 0.02) 7.62 5.08 (2.0 0.02) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 No pin Common 5 -Vout -Vout 6 Case ground (option) Case ground (option) (0.039 0.002) Specifications can be changed without notice Rev. 06/00 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch * internet: http://www.tracopower.com Page 3