LEB Connector
Features
• Absorption misalignment mechanism
• Prevention of mismating.
• Common PCB layout for both plug
and receptacle connectors.
• Both board-to board and wire-to-board
interconnection capability.
• Meets the requirement of JIS C 8121-2-2-
2009 and IEC 60838-2-2-2006 for
Miscellaneous lamp holders -Part 2-2:
Particular requirements- Connectors for
printed circuit board based LED-modules.
1.8mm pitch / Board-Board and Wire-Board Crimp Disconnectable
Standards
Recognized E60389
Specifications
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 300V AC,DC
• Temperature range: –55°C to +105°C
(including temperature range rise in
applying electrical current)
• Contact resistance: Initial value/10mΩ max.
After environmental testing/20mΩ max.
• Insulation resistance: 1,000MΩ min.
• withstanding voltage: AC 1,700V / 1minute
• Applicable wire: Conductor size/AWG#30 to AWG#22
Insulation O.D./0.7 to 1.3mm dia.
• Refer to “General Instruction and Notice when using
Terminals and Connectors at the end of the catalog.
• Contact JST for details.
Designed for LED light bar applications,
the low profile of the connector does
not interfere with the luminescence
angle of LED dies. The LEB Series
provides both board-to-board and wire-
to-board capabilities. The board-to-
board plug and receptacle connectors
allows continuous connection of LED
light bars
1