Technical Data Sheet Chip LED with Right Angle Lens 16-916/Y2C-FQ1R2B/3C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 16-916 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Part No. 16-916/Y2C-FQ1R2B/3C Revision Resin Color Material Emitted Color AlGaInP Brilliant Yellow Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Water Clear Page: 1 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 2 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Absolute Maximum Ratings (Ta=25) Revision Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 3 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 72.0 ----- 180 mcd Viewing Angle 21/2 ----- 125 ----- deg Peak Wavelength p ----- 591 ----- nm Condition IF=20mA Dominant Wavelength d 586 ----- 594 nm Spectrum Radiation Bandwidth ----- 15 ----- nm Forward Voltage VF 1.75 ----- 2.35 V Reverse Current IR ----- ----- 10 A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 4 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Bin Range Of Luminous Intensity Bin Min Max Q1 72.0 90.0 Q2 90.0 112 R1 112 140 R2 140 180 Unit Condition mcd IF=20mA Bin Range Of Dom. Wavelength Group F Bin Min Max DD1 586 588 DD2 588 590 DD3 590 592 DD4 592 594 Unit Condition nm IF=20mA Unit Condition nm IF=20mA Bin Range Of Forward Voltage Group B Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 5 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25C Ta=25C 50 I F (mA) 100 75 Forward Current Relative luminous intensity (%) Spectrum Distribution 50 25 0 500 550 600 650 40 30 25 20 10 0 1.2 700 2.0 Forward Current 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (C) Relative luminous intensity (%) Ambient Temperature 1000 3.0 Ta=25C f=1KHz Duty=1/10 100 10 1 10 10 10 Forward Current Radiation Diagram Forward Current Derating Curve 0 50 I F (mA) 2.8 Rel. Luminous Intensity vs Rel. Luminous Intensity vs. Forward Current 2.4 Forward Voltage VF (V) Wavelength (nm) Relative luminous intensity (%) 1.6 IF (mA) Ta=25C 10 20 30 40 30 25 20 10 0 40 1.0 0.9 50 0.8 60 70 0.7 0 20 40 60 85 100 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 6 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 7 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Desiccant Rev. 3 Label Page: 8 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 2605 Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 9 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260C Max. 10sec. Max. Above255C 30sec.Max. 3C/sec.Max. 6C/sec.Max. Pre-heating Above 217C 60~150sec. 150~200C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 10 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever 16-916/Y2C-FQ1R2B/3C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DSE-0002998 Prepared date: 27-Sep-2012 :3 LifecyclePhase: Rev. 3 Page: 11 of 11 Prepared by: Jack Chiu Release Date:2012-10-01 14:18:45.0 Expired Period: Forever