Data sheet OMNIMATE Signal - series TOP1.5GS TOP1.5GS18/180 5 2STI OR Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Similar to illustration Conductor entry and screw connection in the same direction on this PCB terminal with 5.08 mm pitch for conductor cross-sections up to 2.5 mm. Conductor outlet direction 90 and 180. General ordering data Type Order No. Version GTIN (EAN) Qty. Product data Packaging TOP1.5GS18/180 5 2STI OR 0598460000 PCB terminal, 5.08 mm, No. of poles: 18, 180, Solder pin length (l): 4.5 mm, tinned, Orange, TOP connection, Clamping range, max. : 2.5 mm, Box 4008190523725 20 pc(s). IEC: 630 V / 24 A / 0.5 - 2.5 mm UL: 300 V / 10 A / AWG 26 - AWG 14 Box Creation date January 13, 2019 11:18:45 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1 Data sheet OMNIMATE Signal - series TOP1.5GS TOP1.5GS18/180 5 2STI OR Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Height of lowest version Depth (inches) 93.24 mm 24 mm 19.5 mm 0.728 inch Width (inches) Height (inches) Depth Net weight OMNIMATE Signal - series TOP1.5GS THT solder connection 5.08 mm 18 4.5 mm 1.3 mm 2 DIN 5264 0.5 Nm 10 mm Wire connection method 3.671 inch 0.945 inch 18.5 mm 61.75 g System parameters Product family Mounting onto the PCB Pitch in mm (P) No. of poles Solder pin length (l) Solder eyelet hole diameter (D) Number of solder pins per pole Screwdriver blade standard Tightening torque, max. Stripping length L1 in inches Touch-safe protection acc. to DIN VDE 57 106 3.4 inch Safe from finger touch TOP connection Conductor outlet direction 180 Pitch in inches (P) 0.2 inch Fitted by customer No Solder pin dimensions 0.8 x 1.0 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Screwdriver blade 0.6 x 3.5 Tightening torque, min. 0.4 Nm Clamping screw M 2.5 L1 in mm 86.36 mm Touch-safe protection acc. to DIN VDE 0470 IP 20 Volume resistance 1.20 m Material data Insulating material Colour chart (similar) CTI UL 94 flammability rating Contact surface Storage temperature, min. Max. relative humidity during storage Operating temperature, max. Temperature range, installation, max. PA RAL 2000 600 V-2 tinned -25 C 80 % 100 C 100 C Colour Insulating material group Insulation resistance Contact material Layer structure of solder connection Storage temperature, max. Operating temperature, min. Temperature range, installation, min. Orange I 108 CuZn 1.5-3 m Ni / 4-6 m Sn 55 C -50 C -25 C Conductors suitable for connection Clamping range, min. 0.13 mm Wire connection cross section AWG, min. AWG 26 Solid, min. H05(07) V-U 0.5 mm Flexible, min. H05(07) V-K 0.5 mm w. plastic collar ferrule, DIN 46228 pt 4, min. 0.5 mm w. wire end ferrule, DIN 46228 pt 1, min 0.5 mm Plug gauge in accordance with EN 60999 a x b; o 2.4 mm x 1.5 mm Clamping range, max. 2.5 mm Wire connection cross section AWG, max. AWG 14 Solid, max. H05(07) V-U 2.5 mm Flexible, max. H05(07) V-K 2.5 mm w. plastic collar ferrule, DIN 46228 pt 4, max. 2.5 mm w. wire end ferrule, DIN 46228 pt 1, max. 2.5 mm Creation date January 13, 2019 11:18:45 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2 Data sheet OMNIMATE Signal - series TOP1.5GS TOP1.5GS18/180 5 2STI OR Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to IEC tested acc. to standard Rated current, max. no. of poles (Tu=20C) Rated current, max. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3 IEC 60664-1, IEC 61984 19 A 16 A 320 V 2.5 kV 2.5 kV Rated current, min. no. of poles (Tu=20C) Rated current, min. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance 24 A 21 A 630 V 250 V 2.5 kV 3 x 1s with 120 A Rated data acc. to CSA Institute (CSA) Rated voltage (Use group B / CSA) Rated current (Use group B / CSA) Wire cross-section, AWG, min. Reference to approval values Certificate No. (CSA) 300 V 10 A AWG 26 Specifications are maximum values, details see approval certificate. Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max. 154685-1501716 300 V 10 A AWG 14 Rated data acc. to UL 1059 Rated voltage (Use group B / UL 1059) 300 V Rated current (Use group B / UL 1059) 10 A Wire cross-section, AWG, min. AWG 26 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, max. AWG 14 Packaging Packaging VPE width Box 105 mm VPE length VPE height 40 mm 222 mm EC001284 EC002643 30-21-18-01 27-44-04-01 27-44-04-01 ETIM 4.0 ETIM 6.0 eClass 6.2 eClass 8.1 eClass 9.1 EC002643 EC002643 27-26-11-01 27-44-04-01 27-44-04-01 Classifications ETIM 3.0 ETIM 5.0 UNSPSC eClass 7.1 eClass 9.0 Creation date January 13, 2019 11:18:45 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3 Data sheet OMNIMATE Signal - series TOP1.5GS TOP1.5GS18/180 5 2STI OR Technical data Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Notes Notes * Additional colours on request * Rated current related to rated cross-section & min. No. of poles. * Wire end ferrule without plastic collar to DIN 46228/1 * Wire end ferrule with plastic collar to DIN 46228/4 * Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. * P on drawing = pitch IPC conformity * Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals Approvals ROHS Conform Downloads Brochure/Catalogue Engineering Data FL DRIVES EN FL ANALO.SIGN.CONV. EN MB DEVICE MANUF. EN FL DRIVES DE CAT 2 PORTFOLIOGUIDE EN FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN EPLAN, WSCAD Creation date January 13, 2019 11:18:45 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4 Data sheet OMNIMATE Signal - series TOP1.5GS TOP1.5GS18/180 5 2STI OR Drawings Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensional drawing Graph Creation date January 13, 2019 11:18:45 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5 Wave Solder Profile Recommended wave solderding profiles Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Single Wave: 260 Contact time appr. 3 sec. 260 C 255 C 250 C 240 220 200 Temperature [C] 180 160 140 appr. 150 C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 C Total contact time max. 10 sec. 260 240 260 C 250 C 220 200 Temperature [C] 180 160 140 appr. 150C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmuller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. We reserve the right to make technical changes.