Data sheet
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 93.24 mm Width (inches) 3.671 inch
Height 24 mm Height (inches) 0.945 inch
Height of lowest version 19.5 mm Depth 18.5 mm
Depth (inches) 0.728 inch Net weight 61.75 g
System parameters
Product family OMNIMATE Signal - series
TOP1.5GS
Wire connection method
TOP connection
Mounting onto the PCB THT solder connection Conductor outlet direction 180°
Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch
No. of poles 18 Fitted by customer No
Solder pin length (l) 4.5 mm Solder pin dimensions 0.8 x 1.0 mm
Solder eyelet hole diameter (D) 1.3 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Number of solder pins per pole 2 Screwdriver blade 0.6 x 3.5
Screwdriver blade standard DIN 5264 Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.5 Nm Clamping screw M 2.5
Stripping length 10 mm L1 in mm 86.36 mm
L1 in inches
3.4 inch
Touch-safe protection acc. to DIN VDE
0470 IP 20
Touch-safe protection acc. to DIN VDE
57 106 Safe from finger touch
Volume resistance
1.20 mΩ
Material data
Insulating material PA Colour Orange
Colour chart (similar) RAL 2000 Insulating material group I
CTI ≥ 600 Insulation resistance ≥ 108 Ω
UL 94 flammability rating V-2 Contact material CuZn
Contact surface tinned Layer structure of solder connection 1.5-3 µm Ni / 4-6 µm Sn
Storage temperature, min. -25 °C Storage temperature, max. 55 °C
Max. relative humidity during storage 80 % Operating temperature, min. -50 °C
Operating temperature, max. 100 °C Temperature range, installation, min. -25 °C
Temperature range, installation, max. 100 °C
Conductors suitable for connection
Clamping range, min. 0.13 mm² Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 14
Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 2.5 mm²
Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min. 0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max. 2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1,
max. 2.5 mm²
Plug gauge in accordance with EN
60999 a x b; ø 2.4 mm x 1.5 mm