JSE08 Series DC-DC Converter
xxx Series
www.xppower.com
1
Notes
1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output.
• Regulated Single & Dual Output
• 2:1 Input Range
• DIP16 Package
• 1500 VDC Isolation
• Operating Temperature -40 °C to +105 °C
• ITE Safety Approvals
• High Power Density
• Metal Case
• 3 Year Warranty
Dimensions:
JSE08:
0.94 x 0.54 x 0.31” (23.8 x 13.7 x 8.0 mm)
8 Watts
Models & Ratings
Input voltage Output voltage Output current Input current(1) Maximum
capacitive load(2) Efficiency Model number
No load Full load
9-18V
3V3 1600 mA
10 mA
565 mA 680 µF 78% JSE0812S3V3
5 V 1600 mA 825 mA 680 µF 81% JSE0812S05
12 V 665 mA 790 mA 330 µF 84% JSE0812S12
15 V 535 mA 795 mA 330 µF 84% JSE0812S15
24 V 335 mA 790 mA 150 µF 85% JSE0812S24
±12 V ±335 mA 790 mA ±150 µF 85% JSE0812D12
±15 V ±265 mA 790 mA ±150 µF 84% JSE0812D15
18-36V
3V3 1600 mA
10 mA
280 mA 680 µF 78% JSE0824S3V3
5 V 1600 mA 405 mA 680 µF 82% JSE0824S05
12 V 665 mA 390 mA 330 µF 85% JSE0824S12
15 V 535 mA 395 mA 330 µF 85% JSE0824S15
24 V 335 mA 390 mA 150 µF 86% JSE0824S24
±12 V ±335 mA 395 mA ±150 µF 85% JSE0824D12
±15 V ±265 mA 385 mA ±150 µF 86% JSE0824D15
36-75V
3V3 1600 mA
8 mA
140 mA 680 µF 78% JSE0848S3V3
5 V 1600 mA 205 mA 680 µF 81% JSE0848S05
12 V 665 mA 195 mA 330 µF 85% JSE0848S12
15 V 535 mA 195 mA 330 µF 85% JSE0848S15
24 V 335 mA 195 mA 150 µF 86% JSE0848S24
±12 V ±335 mA 195 mA ±150 µF 86% JSE0848D12
±15 V ±265 mA 195 mA ±150 µF 86% JSE0848D15
178
16 10 9
Bottom View
1.77 [0.07]
0.94 (23.8)
0.60 (15.24)
0.40 (10.16)
0.54 (13.7)
0.12
(3.0) 0.10
(2.54)
ø0.02 (0.5)
0
0.31 (8.0)
0.15
(3.8)
0
Pin Connections
Pin Single Dual
1 -Vin -Vin
7 No Connection No Connection
8 No Connection Common
9 +Vout +Vout
10 -Vout -Vout
16 +Vin +Vin
Mechanical Details
JSE08 Series
www.xppower.com 2
DC-DC Converter
Input
Output
Characteristic Minimum Typical Maximum Units Notes & Conditions
Output Voltage 3.3 30 VDC See Models and Ratings table
Initial Set Accuracy ±2.0 % At full load
Output Voltage Balance ±1.0 ±2.0 % For dual output with balanced laods
Minimum Load A No minimum load required
Line Regulation ±0.2 ±0.8 % From minimum to maximum input at full load
Load Regulation ±0.5 ±1.0 % From 0 to full load
Cross Regulation ±5.0 % On dual output models when one load is varied between
25% and 100% and other is fixed at 100%
Transient Response 35% deviation Recovery within 1% in less than 250 µs for a 25% load
change.
Ripple & Noise 55 mV pk-pk 20 MHz bandwidth. Measured using 0.47 µF ceramic
capacitor.
Overload Protection 150 %
Short Circuit Protection Continuous Trip & Restart (Hiccup mode), with auto recovery
Maximum Capacitive Load See Models and Ratings table
Temperature Coefficient 0.02 %/ ˚C
Characteristic Minimum Typical Maximum Units Notes & Conditions
Input Voltage Range
9.0 18 VDC 12 V nominal
18.0 36 VDC 24 V nominal
36.0 75 VDC 48 V nominal
Input Filter Internal Pi type
Undervoltage Lockout
ON at >9V, OFF at <8 V 12 V models
ON at >18V, OFF at <16 V 24 V models
ON at >36V, OFF at <34 V 48 V models
Input Surge
25
VDC for 1 s
12 V models
50 24 V models
100 48 V models
General
Characteristic Minimum Typical Maximum Units Notes & Conditions
Efficiency 85 % See Models and Ratings table
Isolation: Input to Output 1500/1800 VDC 60 s/1 s
Isolation Resistance 109ΩAt 500 VDC
Isolation Capacitance 500 pF
Switching Frequency 370 kHz
Power Density 50.8 W/in3
Mean Time Between Failure 1 MHrs MIL-HDBK-217F, +25 °C GB
Weight 0.013 (6.1) lb (g)
Environmental
Characteristic Minimum Typical Maximum Units Notes & Conditions
Operating Temperature -40 +105 °C See Derating Curve.
Storage Temperature -50 +125 °C
Case Temperature +105 °C
Humidity 95 %RH Non-condensing
Cooling Natural convection
Case Flammability UL 94V-0 Rated
EMC: Emissions
Phenomenon Standard Test Level Notes & Conditions
Conducted EN55022 Class A No filter required
JSE08 Series
www.xppower.com
DC-DC Converter
314 Mar 16
1. All dimensions are in inches (mm)
2. Weight: 0.013 lbs (6.1 g) approx.
3. Tolerance: X.XX±0.01 (X.X±0.25)
X.XXX±0.005 (X.XX±0.13)
4. Pin Tolerance: ±0.002 (±0.05)
Notes
Mechanical Details
Application Notes
-40
0
Ambient Temperature (°C)
100
50
Output Power (%)
10570 80
Derating Curve
EMC: Immunity
Phenomenon Standard Test Level Criteria Notes & Conditions
ESD EN61000-4-2 ±8 kV air discharge, ±6 kV contact A
Radiated EN61000-4-3 10 V/m A
EFT/Burst EN61000-4-4 ±2 kV A With external capacitor,
suggested part is CHEMI-CON KY 330µF/100V
Surge EN61000-4-5 ±1 kV A With external capacitor,
suggested part is CHEMI-CON KY 330µF/100V
Conducted EN61000-4-6 10 V rms A
Safety Approvals
Safety Agency Safety Standard Notes & Conditions
CB Report IEC60950-1 Information Technology
UL UL/cUL60950-1 Information Technology
178
16 10 9
Bottom View
1.77 [0.07]
0.94 (23.8)
0.60 (15.24)
0.40 (10.16)
0.54 (13.7)
0.12
(3.0) 0.10
(2.54)
ø0.02 (0.5)
0
0.31 (8.0)
0.15
(3.8)
0
Pin Connections
Pin Single Dual
1 -Vin -Vin
7 No Connection No Connection
8 No Connection Common
9 +Vout +Vout
10 -Vout -Vout
16 +Vin +Vin
