DUAL Series
• Independently controlled dual output solid-state relay
• Ratings from 25A to 40A @ 24-530 VAC
• Industry standard package
• SCR output for heavy industrial loads
• DC Con t rol
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage 25A 40A
4-15 VDC D2425D D2440D
15-32 VDC D2425DE D2440DE
4-15 VDC H12D4825D H12D4840D
15-32 VDC H12D4825DE H12D4840DE
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description D2425xx D2440xx H12D4825xx H12D4840xx
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 48-530 48-530
Transient Overvoltage [Vpk] 600 600 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500
Maximum Load Current (3) [Arms] 25 40 25 40
Minimum Load Current [Arms] 0.15 0.15 0.15 0.15
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/625 239/250 597/625
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6
Thermal Resistance Junction to Case (Rjc ) [°C/W] 1.02 0.63 1.02 0.63
Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec] 285/259 1779/1621 285/259 1779/1621
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description D24XXD H12D48XXD E-SUFFIX
Control Voltage Range 4-15 VDC 4-15 VDC 15-32 VDC
Minimum Turn-On Voltage 4.0 VDC 4.0 VDC 15.0 VDC
Minimum T urn -Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC
Typical Input Current @ 5 VDC (@ 24 VDC for E-Suffix) 13 mA 13 mA 15 mA
Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm
Maximum Turn-On Time [msec] (4) 1/2 cycle 1/2 cycle 1/2 cycle
Maximum Turn-Off Time [msec] 1/2 cycle 1/2 cycle 1/2 cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3.0 oz (86.5g)
Encapsulation Ther ma lly conductive Epoxy
Terminals .25" Fastons, .025" Square Pins
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
3) Off-Stat e dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, for derating curves see next page.
4) Turn-on time for random turn-on (-10) versions is 0.1 msec
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in acc ord anc e wit h the requirements of IEC 62314
E116949 (except 15-32VDC control) LR81689 (240 V, 4-15VDC control only) 5902 UG
Rev. 121211
ANNEX - ENVIROMENTAL INFORMATION