160T11006 030220 BJ Jumper bar Use the BJ jumper bar to connect consecutive and non consecutive terminal blocks with the same spacing. Two types of jumper bars are available : an assembled unit and a not assembled unit. Both jumper bars include a metal tube wich makes contact with the terminal block's internal connector bar. To mount the BJ jumper bar accessory onto terminal blocks still having top center partitions, the user must cut out all partitions between the blocks. When the BJ jumper bar is used with each of two series of connected blocks, the top center opening at the junction of the two series must be closed by a circuit separator or a separator end section SCM, SCF or SCD to permit different voltage potentials on each series jumper bar accessory. BJM Assembled jumper bar Two versions of this accessory are available. Fractionable model, composed of captive screws on a jumper bar system. This accessory can be used for connecting consecutive blocks only. without IP20 protection (standard) Current capacity, Amps BJM5 24 A 24 A 24 A 24 A 24 A BJM6 32 A 32 A 32 A 32 A 32 A BJM8 41 A 41 A 41 A 41 A 41 A for MA 2,5/5 blocks 2 poles 0176 273.01 3 poles 0176 274.02 4 poles 0176 275.03 5 poles 0176 276.04 10 poles 0176 277.05 for M 4/6 blocks 2 poles 0168 516.25 3 poles 0168 517.26 4 poles 0168 518.07 5 poles 0168 519.00 10 poles 0168 973.07 for M 6/8 blocks 2 poles 0168 520.05 3 poles 0168 521.22 4 poles 0168 522.23 5 poles 0168 523.24 10 poles 0168 974.00 Max. recommended torque : 0.6 Nm BJD with IP20 protection (touchproof) Current capacity, Amps BJMI5 24 A 24 A 24 A 24 A 24 A BJMI6 32 A 32 A 32 A 32 A 32 A BJMI8 41 A 41 A 41 A 41 A 41 A for MA 2,5/5 blocks 2 poles 0176 278.16 3 poles 0176 279.17 4 poles 0176 280.05 5 poles 0176 281.22 10 poles 0176 282.23 for M 4/6 blocks 2 poles 0176 663.00 3 poles 0176 664.01 4 poles 0176 665.02 5 poles 0176 666.03 10 poles 0176 667.04 for M 6/8 blocks 2 poles 0176 669.16 3 poles 0176 670.13 4 poles 0176 671.00 5 poles 0176 672.01 10 poles 0176 673.02 Max. recommended torque : 0.6 Nm Assembled jumper bar Only one version of this accessory is available Simplified model, composed of a bar prepunched to the spacing of the blocks, and of captive screws and spacers. This accessory can be used for connecting blocks which are consecutive or not : in this case remove the screw and spacer which are not required. without IP20 protection Current capacity, Amps BJD6 for D 2,5/6.D blocks, triple deck 24 A 2 poles 0178 024.25 24 A 3 poles 0178 025.26 24 A 4 poles 0178 026.27 24 A 5 poles 0178 027.20 24 A 10 poles 0178 032.25 24 A 20 poles 0178 033.26 Max. recommended torque : 0.6 Nm ABB Entrelec Simplified model, composed of a bar prepunched to the spacing of the blocks, and of captive screws and spacers. This accessory can be used for connecting blocks which are consecutive or not : in this case remove the screw and spacer which are not required. without IP20 protection (standard) with IP20 protection (touchproof) Current capacity, Amps Current capacity, Amps BJM5D 24 A 24 A 24 A 24 A 24 A BJM6D 32 A 32 A 32 A 32 A 32 A BJM62 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A BJM65 32 A 32 A 32 A 32 A 32 A 32 A BJM10 57 A 57 A 57 A 57 A 57 A BJM12 76 A 76 A 76 A 76 A 76 A BJM16 110 A 110 A 110 A 110 A 110 A BJM4 17,5 A 17,5 A 17,5 A 17,5 A BJMI5D 24 A 24 A 24 A 24 A 24 A BJMI6D 32 A 32 A 32 A 32 A 32 A for MA 2,5/5.D blocks 2 poles 0176 736.21 3 poles 0176 737.22 4 poles 0176 738.03 5 poles 0176 739.04 10 poles 0176 740.11 for M 4/6.D blocks 2 poles 0179 668.20 3 poles 0179 669.21 4 poles 0179 670.26 5 poles 0179 671.13 10 poles 0179 672.14 BJMI10 57 A 57 A 57 A 57 A 57 A BJMI12 76 A 76 A 76 A 76 A 76 A for M 10/10 blocks 2 poles 0176 675.04 3 poles 0176 676.05 4 poles 0176 677.06 5 poles 0176 678.17 10 poles 0176 679.10 for M 16/12 blocks 2 poles 0179 626.06 3 poles 0179 628.10 4 poles 0179 629.11 5 poles 0179 630.16 10 poles 0179 631.03 for MA 2,5/5.D blocks 0176 226.22 2 poles 0176 227.23 3 poles 0176 228.04 4 poles 0176 229.05 5 poles 0176 230.02 10 poles for M 4/6.D blocks 0173 515.11 2 poles 0173 516.12 3 poles 0173 517.13 4 poles 0173 519.25 5 poles 0173 520.22 10 poles for D 4/6.LNTP, DR 4/6 blocks 0173 217.26 2 poles 0173 218.07 3 poles 0173 219.00 4 poles 0173 221.22 5 poles 0174 112.16 6 poles 0174 113.17 7 poles 0174 114.10 8 poles 0174 115.11 9 poles 0173 226.27 10 poles for M 4/6,5.3G blocks 0174 764.03 2 poles 0174 765.04 3 poles 0174 766.05 4 poles 0174 767.06 5 poles 0174 768.17 10 poles 0174 769.10 25 poles for M 10/10 blocks 0173 611.21 2 poles 0173 612.22 3 poles 0173 613.23 4 poles 0173 614.24 5 poles 0173 615.25 10 poles for M 16/12 blocks 0179 618.16 2 poles 0179 619.17 3 poles 0179 620.14 4 poles 0179 621.01 5 poles 0179 622.02 10 poles for M 35/16 blocks 0179 613.01 2 poles 0179 614.02 3 poles 0179 615.03 4 poles 0179 616.04 5 poles 0179 617.05 10 poles for DR 1,5/4 blocks 0205 735.06 2 poles 0205 736.07 3 poles 0205 737.00 5 poles 0205 738.11 10 poles Max. recommended torque : except for BJM16 (1.2 Nm) BJMI16 for M 35/16 blocks 110 A 2 poles 0206 217.00 110 A 3 poles 0206 218.11 110 A 4 poles 0206 219.12 110 A 5 poles 0206 220.17 110 A 10 poles 0206 221.04 Max. recommended torque : except for BJMI16 (1.2 Nm) 0.6 Nm 0.6 Nm 589 H 1