678D Vishay Sprague Aluminum Capacitors + 105 C, Miniature, Radial Lead FEATURES Improved SMPS output capacitors Highest ripple current ratings per case size High CV Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS TEMPERATURE VALUE Nominal case size O D x L in mm Operating temperature Rated Capacitance range, CR Tolerance on CR Rated voltage range, UR Termination Life validation test at 105 C Shelf life at 105 C 0.394" x 0.472" [10.0 x 12.0] to 0.709" x 1.575" [18.0 x 40.0] - 55 C to + 105 C 33 F to 6800 F 20 % 6.3 WVDC to 63 WVDC 2 and 3 radial leads and axial mount. 4000 h ( 0.512" [13.0] diameter): 3000 h (0.394" [10.0] diameter): CAP 20 % (6.3 WVDC to 25 WVDC), 15 % (40 WVDC to 63 WVDC) from initial measurement. ESR 1.3 x initial specified limit. DCL 2 x initial specified limit. 1000 h: CAP 20 % (6.3 WVDC to 25 WVDC), 15 % (40 WVDC to 63 WVDC) from initial measurements. ESR 1.3 x initial specified limit. I = 0.01 CV, 2 minute charge time. I = 0.03 CV, 1 minute charge time. I in A, C in F, V in Volts DC leakage current AMBIENT TEMPERATURE MULTIPLIERS + 105 C 1.0 + 85 C 2.2 + 75 C 2.7 + 65 C 3.0 FREQUENCY (Hz) WVDC 50 to 60 100 to 120 300 to 400 1K to 19K 20K to 200K 6.3 to 63 0.60 0.70 0.75 0.82 1.0 LOW TEMPERATURE PERFORMANCE CAPACITANCE RATIO C - 55 C/C + 25 C MINIMUM AT 120 Hz Voltage Multiplier Maximum Capacitance Change 6.3 V - 16 V 0.75 25 V- 63 V 0.85 Maximum Impedance Change Voltage Multiplier 6.3 V - 16 V 2.0 25 V - 63 V 1.5 ESL (TYPICAL VALUES AT 1 MHz to 10 MHz) Nominal Diameter Typical ESL (nH) 0.394 [10.0] 4.0 0.512 [13.0] 7.0 0.630 [18.0] 10.0 0.709 [18.0] 12.0 DIMENSIONS in inches [millimeters] CASE CODE CC CD CG DG DK CASE CODE DM DT DS EK NOMINAL D STYLES 2 AND 4 L 0.394 [10.0] 0.512 [13.0] 0.394 [10.0] 0.630 [16.0] 0.394 [10.0] 0.787 [20.0] 0.49 [12.5] 0.787 [20.0] 0.492 [12.5] 0.984 [25.0] NOMINAL D L 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] 0.630 [16.0] 1.043 [26.5] 1.319 [33.5] 1.673 [42.5] 0.984 [25.0] www.vishay.com 414 D (max.) L (max.) 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.669 [17.0] 0.413 [10.5] 0.846 [21.5] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 1.043 [26.5] STYLES 2 AND 4 D (max.) L (max.) STYLES 3 AND 5 D (max.) L (max.) 0.413 [10.5] 0.630 [16.0] 0.413 [10.5] 0.740 [18.8] 0.413 [10.5] 0.906 [23.0] 0.512 [13.0] 0.906 [23.0] 0.512 [13.0] 1.142 [29.0] STYLES 3 AND 5 D (max.) 0.512 [13.0] 1.102 [28.0] 0.512 [13.0] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 0.650 [16.5] 1.031[26.2] 0.650 [16.5] L (max.) 1.161 [29.5] 1.417 [36.0] 1.791 [45.5] 1.098 [27.9] LEAD SPACING S 0.024 [0.60] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] LEAD SPACING S 0.002 T 0.002 [0.50] [0.50] 0.197 [5.0] 0.098 [2.5] 0.197 [5.0] 0.098 [2.5] 0.197 [5.0] 0.098 [2.5] 0.295 [7.5] 0.150 [3.8] For technical questions, contact: aluminumcaps4@vishay.com LEAD DIAMETER AWG Nominal No. 0.025 [0.63] 22 0.025 [0.63] 22 0.025 [0.63] 22 0.032 [0.81] 20 0.032 [0.81] 20 LEAD DIAMETER AWG Nominal No. 0.032 [0.81] 20 0.032 [0.81] 20 0.032 [0.81] 20 0.032 [0.81] 20 Document Number: 42055 Revision: 06-Sep-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D Aluminum Capacitors + 105 C, Miniature, Radial Lead Vishay Sprague DIMENSIONS in inches [millimeters] NOMINAL STYLES 2 AND 4 STYLES 3 AND 5 CASE CODE D L D (max.) L (max.) D (max.) L (max.) EN ER EU FR FV 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] 0.709 [18.0] 0.709 [18.0] 1.260 [32.0] 1.417 [36.0] 1.575 [40.0] 1.417 [36.0] 1.57 [40.0] 0.650 [16.5] 0.650 [16.5] 0.650 [16.5] 0.728 [18.5] 0.728 [18.5] 1.319 [33.5] 1.476 [37.5] 1.642 [41.7] 1.476 [37.5] 1.654 [42.0] 0.650 [16.5] 0.650 [16.5] 0.65 [16.5] 0.728 [18.5] 0.728 [18.5] 1.417 [36.0] 1.575 [40.0] 1.669 [42.4] 1.575 [40.0] 1.693 [43.0] LEAD SPACING S 0.002 T 0.002 [0.50] [0.50] 0.295 [7.5] 0.150 [3.8] 0.295 [7.5] 0.150 [3.8] 0.295 [7.5] 0.150 [3.8] 0.295 [7.5] 0.150 [3.8] 0.295 [7.5] 0.150 [3.8] LEAD DIAMETER AWG Nominal No. 0.032 [0.81] 20 0.032 [0.81] 20 0.032 [0.81] 20 0.032 [0.81] 20 0.032 [0.81] 20 TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters] P Formed Leads K H H0 F W0 W L1 P0 D0 d DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES CASE SIZE 0.236 x 0.453 [6.0 x 11.0] 0.315 x 0.472 [8.0 x 12.0] F LEAD SPACING 0.197 [5.0] 0.197 [5.0] Unformed (Straight) Leads STD. QTY/REEL 800 700 P H F W0 W L1 P0 d D0 f DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES CASE SIZE 0.236 x 0.453 [6.0 x 11.0] 0.315 x 0.472 [8.0 x 12.0] 0.394 x 0.512 [10.0 x 13.0] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] Note (1) Available as special order. Document Number: 42055 Revision: 06-Sep-11 F LEAD SPACING 0.098 [2.5] 0.140 (1) [3.5] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] For technical questions, contact: aluminumcaps4@vishay.com STD. QTY/REEL 800 700 500 500 500 www.vishay.com 415 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D Aluminum Capacitors + 105 C, Miniature, Radial Lead Vishay Sprague DIMENSIONS in inches [millimeters] CASE SIZE (Diameter x Length) ITEM d - Lead-wire diameter P - Pitch of component P0 - Feed hole pitch F - Lead-to-lead distance K - Clinch height H - Height of component from tape center H0 - Lead-wire clinch height W - Tape width W0 - Hold down tape width D0 - Feed hole diameter t - Totaltape thickness L1 -Maximumlead protrusion 0.236 x 0.433 [6.0 x 11.0] 0.315 x 0.472 [8.0 x 12.0] 0.394 x 0.512 [10.0 x 13.0] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] 0.098 [2.5] 0.728 [18.5] 0.630 [16.0] 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] 0.157 [4.0] 0.787 [20.0] 0.630 [16.0] 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] N/A 0.906 [23.0] N/A 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] N/A 0.906 [23.0] N/A 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] N/A 0.906 [23.0] N/A 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] Note Terminal Code "I" = Tape and reel. Terminal Code "+" = Tape and ammo. Positive leader is standard. Negative leader is available by special order. ORDERING EXAMPLE Electrolytic capacitor 678D series: 678D 108 M 6R3 DG 3 D DESCRIPTION CODE 678D 108 M 6R3 DG 3 D EXPLANATION Product type Capacitance value (1000 F) Tolerance (M = 20 %) Voltage rating at 105 C (6R3 = 6.3 V) Can size (see dimensions table) Sleeve and sealing (3 = P.V.C. sleeve w/epoxy end seal) Packaging (D = bulk; straight leads) Note * For lead (Pb)-free/RoHS compliant products add suffix "E3" to part number. Example: 678D108M6R3DG3DE3 STANDARD RATINGS in inches [millimeters] CAPACITANCE (F) PART NUMBER 330.0 470.0 1000.0 2200.0 3300.0 4700.0 678D337M6R3CC3D 678D477M6R3CD3D 678D108M6R3DG3D 678D228M6R3EK3D 678D338M6R3DS3D 678D478M6R3FR3D 330.0 678D337M010CD3D 470.0 678D477M010CG3D 678D108M010DM3D 1000.0 (1) 2200.0 678D228M010EK3D 3300.0 678D338M010EN3D 4700.0 678D487M010FR3D Note (1) These values are normally stocked. www.vishay.com 416 NOMINAL CASE SIZE DxL Max. ESR at + 25 C (m) 20 Hz 6.3 WVDC at 105 C, SURGE = 9 V 0.394 x 0.512 [10.0 x 13.0] 0.540 0.394 x 0.630 [10.0 x 16.0] 0.340 0.492 x 0.787 [12.5 x 20.0] 0.200 0.630 x 0.984 [16.0 x 25.0] 0.110 0.492 x 1.673 [12.5 x 42.5] 0.067 0.709 x 1.417 [18.0 x 36.0] 0.066 10 WVDC at 105 C, SURGE = 13 V 0.394 x 0.630 [10.0 x 16.0] 0.350 0.394 x 0.787 [10.0 x 20.0] 0.235 0.492 x 1.043 [12.5 x 26.5] 0.120 0.630 x 0.984 [16.0 x 25.0] 0.115 0.630 x 1.260 [16.0 x 32.0] 0.085 0.709 x 1.417 [18.0 x 36.0] 0.070 20 kHz 20 kHz to 100 kHz Max. IMPEDANCE at + 25 C (m) 100 Hz 0.213 0.133 0.071 0.041 0.031 0.029 0.36 0.49 0.83 1.36 1.67 2.02 0.213 0.132 0.070 0.045 0.032 0.031 0.135 0.092 0.062 0.042 0.038 0.031 0.46 0.63 0.98 1.52 1.56 1.97 0.134 0.090 0.061 0.046 0.041 0.033 For technical questions, contact: aluminumcaps4@vishay.com Max. RIPPLE at + 105 C (A) Document Number: 42055 Revision: 06-Sep-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D Aluminum Capacitors + 105 C, Miniature, Radial Lead Vishay Sprague STANDARD RATINGS in inches [millimeters] 20 kHz 20 kHz to 100 kHz Max. IMPEDANCE at + 25 C (m) 100 Hz 0.585 0.217 0.40 0.217 0.370 0.137 0.52 0.136 0.394 x 0.787 [10.0 x 20.0] 0.250 0.098 0.70 0.094 678D108M016DM3D 0.492 x 1.043 [12.5 x 26.5] 0.130 0.066 1.00 0.065 678D228M016ER3D 0.630 x 1.417 [16.0 x 36.0] 0.074 0.032 1.78 0.034 3300.0 678D338M016FR3D 0.709 x 1.417 [18.0 x 36.0] 0.074 0.032 1.94 0.034 220.0 678D227M020CD3D 0.394 x 0.630 [10.0 x 16.0] 0.380 0.150 0.41 0.148 330.0 678D337M020CG3D 0.394 x 0.787 [10.0 x 20.0] 0.270 0.100 0.61 0.098 0.075 NOMINAL CASE SIZE DxL CAPACITANCE (F) PART NUMBER 220.0 (1) 678D227M016CC3D 0.394 x 0.512 [10.0 x 13.0] 330.0 (1) 678D337M016CD3D 0.394 x 0.630 [10.0 x 16.0] 470.0 678D477M016CG3D 1000.0 (1) 2200.0 Max. ESR at + 25 C (m) 20 Hz Max. RIPPLE at + 105 C (A) 16 WVDC at 105 C, SURGE = 20 V 20 WVDC at 105 C, SURGE = 30 V 470.0 678D477M020DG3D 0.492 x 0.787 [12.5 x 20.0] 0.250 0.077 0.45 1000.0 678D108M020DT3D 0.492 x 1.280 [12.5 x 33.5] 0.115 0.048 0.78 0.045 2200.0 678D228M020ER3D 0.630 x 1.417 [16.0 x 36.0] 0.077 0.032 1.80 0.034 3300.0 678D338M020FV3D 0.709 x 1.575 [18.0 x 40.0] 0.061 0.026 2.25 0.028 25 WVDC at 105 C, SURGE = 35 V 100.0 (1) 678D107M025CC3D 0.394 x 0.512 [10.0 x 13.0] 0.700 0.250 0.32 0.250 220.0 678D227M025CG3D 0.394 x 0.787 [10.0 x 20.0] 0.300 0.105 0.59 0.100 330.0 (1) 678D337M025DG3D 0.492 x 0.787 [12.5 x 20.0] 0.270 0.078 0.79 0.076 470.0 (1) 678D477M025DM3D 0.492 x 1.043 [12.5 x 26.5] 0.160 0.067 0.97 0.068 1000.0 678D108M025DS3D 0.492 x 1.673 [12.5 x 42.5] 0.090 0.034 1.60 0.036 2200.0 678D228M025FV3D 0.709 x 1.575 [18.0 x 40.0] 0.062 0.026 2.22 0.028 40 WVDC at 105 C, SURGE = 55 V 47.0 678D476M040CC3D 0.394 x 0.512 [10.0 x 13.0] 0.950 0.265 0.28 0.265 100.0 (1) 678D107M040CD3D 0.394 x 0.630 [10.0 x 16.0] 0.580 0.165 0.38 0.165 330.0 (1) 678D337M040DM3D 0.492 x 1.043 [12.5 x 26.5] 0.200 0.068 0.93 0.070 470.0 (1) 678D477M040EK3D 0.630 x 0.984 [16.0 x 25.0] 0.133 0.046 1.28 0.050 1000.0 678D108M040ER3D 0.630 x 1.417 [16.0 x 36.0] 0.080 0.033 1.76 0.035 50 WVDC at 105 C, SURGE = 75 V 47.0 678D476M050CC3D 0.394 x 0.512 [10.0 x 13.0] 1.250 0.275 0.28 0.275 100.0 (1) 678D107M050CG3D 0.394 x 0.787 [10.0 x 20.0] 0.520 0.115 0.57 0.112 220.0 678D227M050DM3D 0.472 x 1.043 [12.5 x 26.5] 0.240 0.069 0.93 0.071 330.0 678D337M050EK3D 0.630 x 0.984 [16.0 x 25.0] 0.150 0.048 1.26 0.052 470.0 678D477M050DS3D 0.492 x 1.673 [12.5 x 42.5] 0.110 0.036 1.55 0.039 1000.0 678D108M050FV3D 0.709 x 1.575 [18.0 x 40.0] 0.077 0.028 2.15 0.032 0.288 63 WVDC at 105 C, SURGE = 80 V 33.0 678D336M063CC3D 0.394 x 0.512 [10.0 x 13.0] 1.600 0.288 0.27 47.0 678D476M063CD3D 0.394 x 0.630 [10.0 x 16.0] 1.000 0.180 0.37 0.180 100.0 678D107M063DG3D 0.492 x 0.787 [12.5 x 20.0] 0.450 0.093 0.72 0.090 220.0 678D227M063DT3D 0.492 x 1.280 [12.5 x 33.5] 0.160 0.055 1.10 0.054 220.0 (1) 678D227M063EK3D 0.630 x 0.984 [16.0 x 25.0] 0.170 0.050 1.23 0.054 330.0 678D337M063DS3D 0.492 x 1.673 [12.5 x 42.5] 0.130 0.038 1.51 0.040 470.0 678D477M063ER3D 0.630 x 1.417 [16.0 x 36.0] 0.120 0.035 1.70 0.038 Note (1) These values are normally stocked. Document Number: 42055 Revision: 06-Sep-11 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com 417 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000