Model 3058A Accelerometer Piezoresistive MEMS DC Response, Gas Damped Screw Mounted Integral Temp Compensation The Model 3058A is a silicon MEMS accelerometer with integral temperature compensation. The accelerometer is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer is offered in ranges from 2g to 100g range and provides a flat frequency response to minimum 1500Hz. The silicon MEMS sensor is gas damped and incorporates over-range stops for high-g shock protection. dimensions For a similar accelerometer designed for adhesive mounting, see the model 3052A. FEATURES * * * * * Bolt Mounted 1.0% Non-Linearity 0 to +50C Temp Compensation Built-in Over-range Stops Low Power Consumption APPLICATIONS * * * * * * Vibration & Shock Monitoring Motion Control Impact & Shock Testing Transportation Measurements Embedded Applications Machinery Model 3058A Rev A 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 03/15/2012 t&m@meas-spec.com Model 3058A Accelerometer performance specifications All values are typical at +24C, 100Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1002 for Embedded DC Accelerometers. Parameters DYNAMIC Range (g) Sensitivity (mV/g)1 Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Damping Ratio Shock Limit (g) 2 8.0-16.0 0-150 700 1.0 <3 0.7 3000 ELECTRICAL Zero Acceleration Output (mV) Excitation Voltage (Vdc) Input Impedance () Output Impedance () Insulation Resistance (M) Residual Noise (V RMS) Ground Isolation 2 2.7 to 12 1200-6500 1200-6500 >100 10 Isolated from Mounting Surface ENVIRONMENTAL Thermal Zero Shift (%FSO/C) Thermal Sensitivity Shift (%/C) Operating Temperature (C) Compensated Temperature (C) Storage Temperature (C) Humidity 0.060 0.060 -40 to +125 0 to +50 -40 to +125 Epoxy Sealed, IP61 Notes 5 4.8-7.2 0-250 800 1.0 <3 0.7 3000 10 2.4-3.6 0-350 1000 1.0 <3 0.7 3000 20 1.2-1.8 0-550 1500 1.0 <3 0.7 3000 50 0.48-0.72 0-1000 4000 1.0 <3 0.6 5000 100 0.24-0.36 0-1300 6000 1.0 <3 0.5 5000 @5Vdc Excitation 5% <1 Typical Differential @50Vdc Maximum 0 to +50C 0 to +50C PHYSICAL Case Material Aluminum Flange, Ceramic Cover Weight (grams) 4.5 Mounting 2x #4-40 Mounting Screws Mounting Torque 6 lb-in (0.7 N-m) 1 Output is ratiometric to excitation voltage Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 100Hz Optional accessories: 101 140 Three Channel DC Signal Conditioner Amplifier Auto-Zero Inline Amplifier The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering info PART NUMBERING Model Number+Range+Electrical Connection 3058A-GGG-P l l_____Electrical Connection (P=pins) l___________Range (010 is 10g) Example: 3058A-010-P Model 3058A, 10g, Pins Model 3058A Rev A 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 03/15/2012 t&m@meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 3058-020-P