This document was generated on 04/01/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: Status: 0622008900 Active Overview: Description: Application Tooling Manual Press for Micro-D Backshell Crimp Tool Kit, 9 Circuits Documents: RoHS Certificate of Compliance (PDF) General Product Family Series Comments Function Geographic Area Level of Automation More Detailed Tech Information Overview Product Name Tool Type UPC Warranty Disclaimer Application Tooling 207125 See Tooling Specification (PDF) Above. Type: ARBOR PRESS, See Tooling Specification (PDF) Above. Type: ARBOR PRESS Crimp Global Manual applicationtooling@molex.com Application Tooling N/A Arbor Press 800754012683 CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or tooling support where tooling other than Molex Tooling is used or where Molex Tooling is modified. Series image - Reference only EU ELV Not Reviewed EU RoHS China RoHS Not Reviewed REACH SVHC Not Reviewed Halogen-Free Status Not Reviewed For more information, please visit Contact US China ROHS ELV RoHS Phthalates Not Reviewed Not Reviewed Not Reviewed Search Parts in this Series 207125 Series Use With 622009000 , 622008900 Material Info Reference - Drawing Numbers Application Tooling Documents ATS-622008900 Application Tooling | FAQ Description Product # 1.27mm Pitch 834219014 Commercial Micro D, Cable Receptacle Kit, 9 Circuits This document was generated on 04/01/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION