10
Presentation
Combined with a pressure transmitter, the ZMLP switch with display converts an
analog signal into one or two switching outputs with adjustable thresholds.
It can also be used to display the measured pressure. One of 27 display ranges, from
-14.5 to 6000, can be selected for this purpose, meaning the switch can adapt to the
majority of pressure transmitters, whether calibrated in bar, psi or pascal.
Depending on the model, ZMLP switches with display are available with different
output congurations:
b one 4…20 mA analog output and one switching output, PNP or NPN type,
hysteresis or window switching mode
b two switching outputs, PNP or NPN type, hysteresis switching mode (xed
hysteresis)
Compact and robust:
Its compact housing made of ValoxTM PBT and polyester front face provide it with
IP65, IP67 and IP69K degrees of protection, making it suitable for the harshest
environments. These products are for a nominal supply voltage of 24 V c and have
a 17 to 33 V c operating range.
Simplicity of setup:
These products must be connected to an electronic pressure transmitter with
4…20 mA analog output and 4-pin M12 connector.
They can be mounted:
b Directly on the pressure transmitter. The product body can be turned through
300°, enabling optimum orientation of the display and settings.
b Or mounted remotely, up to 20 metres from the transmitter, using a simple jumper
cable. In this case, clever design accessories allow the product to be xed in place
quickly, horizontally, vertically or even directly on the pressure inlet pipe.
Description
1 4-pin male M12 output connector, for connection to an automation platform.
2 Indicator LEDs displaying the output status (LED lit when the output has been
activated).
3 7 segments/4-digit display.
4 Pressure unit indication, bar by default, psi, kPa or Mpa by the addition of an
adhesive label supplied with the product.
5 Potentiometer for selecting the display size and adjusting the switching threshold
values.
6 4-position rotary switch for selecting the parameter to be congured.
7 4-pin female M12 connector, for connection to the pressure transmitter.
Functions
Congurable functions
For the display:
b pressure unit (bar, psi, kPa and MPa)
b 27 display ranges can be selected, from -14.5 to 6000
For the solid-state output(s):
b NO or NC contact
Locking/unlocking:
b In order to avoid losing the product settings accidentally, the product can be
locked. The settings cannot then be changed.
Fast diagnostic function
b Illumination of all the display segments on each power-up, enabling checking of
their operation.
Presentation,
description,
functions
Electronic pressure sensors
OsiSense XM
Switches with 4-digit display, type ZMLP
4
3
2
1
2
6
5
Example of remote mounting
(with jumper cable and xing
bracket).
Example of direct mounting
on the pressure transmitter.
300°