THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
1
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
The HMC725LC3C is a XOR/XNOR gate function
designed to support data transmission rates of up to 14
Gbps, and clock frequencies as high as 14 GHz.
All differential inputs to the HMC725LC3C are CML
and terminated on-chip with 50 Ohms to the positive
supply, GND, and may be DC or AC coupled. The
differential CMl outputs are source terminated to to 50
Ohms and may also be AC or DC coupled. Outputs can
be connected directly to a 50 Ohm ground-terminated
system or drive devices with CML logic input. The
HMC725LC3C operates from a single -3.3 V supply and
is available in ROHS-compliant 3x3 mm SMT package.
General Description
Features
Functional Diagram
Inputs Terminated Internally to 50 Ohms
Differential or Single-Ended Operation
Fast Rise and Fall Times: 19 / 18 ps
Low Power Consumption: 230 mW typ.
Propagation Delay: 105 ps
Single Supply: -3.3 V
16 Lead Ceramic 3x3 mm SMT Package: 9 mm2
Typical Applications
The HMC725LC3C is ideal for:
• 16 G Fiber Channel
• RF ATE Applications
• Broadband Test & Measurement
• Serial Data Transmission up to 14 Gbps
• Digital Logic Systems up to 14 GHz
Electrical Specications, TA = +25 °C, Vee = -3.3 V
Parameter Conditions Min. Typ. Max Units
Power Supply Voltage -3.6 -3.3 -3.0 V
Power Supply Current 70 mA
Maximum Data Rate 14 Gbps
Maximum Clock Rate 14 GHz
Input Voltage Range -1.5 0.5 V
Input Differential Range 0.1 2.0 Vp-p
Input Return Loss Frequency <14 GHz 10 dB
Output Amplitude Single-Ended, peak-to-peak 550 mVp-p
Differential, peak-to-peak 110 0 mVp-p
Output High Voltage -10 mV
Output Low Voltage -560 mV
Output Rise / Fall Time Differential, 20% - 80% 19 / 18 ps
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
2
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Electrical Specications (continued)
Parameter Conditions Min. Typ. Max Units
Output Return Loss Frequency <14 GHz 10 dB
Small Signal Gain 27 dB
Random Jitter Jr rms 0.2 ps rms
Deterministic Jitter, Jd peak-to-peak, 215-1 PRBS input [1] 2 ps, p-p
Propagation Delay, td 105 ps
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215-1 PRBS input, and a single-ended output
DC Current vs. Supply Voltage [1]
55
60
65
70
75
80
85
90
-3.8 -3.6 -3.4 -3.2 -3 -2.8
+25C
+85C
-40C
DC CURRENT (mA)
SUPPLY VOLTAGE (V)
Output Differential Voltage vs. Frequency [3] Rise / Fall Time vs. Supply [1]
15
17
19
21
23
25
-3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9
tr
tf
RISE/FALL TIME (ps)
SUPPLY VOLTAGE (V)
[[1] Data rate = 13 Gbps [2] Frequency = 10 GHz [3] Vee = -3.3 V
Output Differential Voltage
vs. Supply Voltage [2]
1000
1100
1200
1300
1400
1500
-3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9
+25C
+85C
-40C
VOUT DIFFERENTIAL (mVp-p)
SUPPLY VOLTAGE (V)
700
800
900
1000
1100
1200
1300
2 4 6 8 10 12 14 16
VOUT DIFFERENTIAL (mVp-p)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Input Return Loss vs. FrequencyOutput Return Loss vs. Frequency
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14
RETURN LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14
RETURN LOSS (dB)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
4
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Eye Diagram
Timing Diagram
Truth Table
Input Outputs
ABD
L L L
L H H
H L H
H H L
Notes:
A = AP - AN
B = BP - BN
D = DP - DN
H - Positive voltage level
L - Negative voltage level
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 10 Gbps PN code, Vin = 300 mVp-p differential.
Both output channels shown.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
5
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
Power Supply Voltage (Vee) -3.75 V to +0.5 V
Input Signals -2 V to +0.5 V
Output Signals -1.5 V to +1 V
Continuous Pdiss (T = 85 °C)
(derate 17 mW/°C above 85 °C) 0.68 W
Thermal Resistance (Rth j-p) Worst
case junction to package paddle 59 °C/W
Maximum Junction Temperature 125 °C
Storage Temperature -65 °C to +150 °C
Operating Temperature -40 °C to +85 °C
ESD Sensitivity (HBM) Class 1C
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC725LC3C Alumina, White Gold over Nickel MSL3 [1] H725
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
6
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Pin Number Function Description Interface Schematic
1, 4, 5, 8, 9, 12 GND These pins must be connected to a high-quality
RF/DC ground.
2, 3
6, 7
AN, AP
BP, BN
Differential Data Inputs, Current Mode Logic (CML)
referenced to positive supply.
10, 11 DN, DP Differential Data Outputs, Current Mode Logic (CML)
referenced to positive supply
13, 16 Vee Negative Supply
14,
Package Base GND Supply Ground
15 N/C No Connection required. This pin may be connected
to RF/DC ground without affecting performance.
Pin Descriptions
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
7
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Evaluation PCB
List of Materials for Evaluation PCB 122520 [1]
Item Description
J1 - J6 PCB Mount SMA RF Connectors
J7, J 9 DC Pin
C1 4.7 µF Capacitor, Tantalum
C5 100 pF Capacitor, 0402 Pkg.
U1 HMC725LC3C
High Speed Logic, XOR / XNOR
PCB [2] 122518 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to GND. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
8
HMC725LC3C
v04.0514
14 Gbps, FAST RISE TIME
XOR / XNOR GATE
Application Circuit
