DC DC Fan DC Fan 120 mm sq. 120x120x25 mm San Ace 120 9S type Silent Fan General Specifications Material ................................................ Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1) Expected life .......................................... See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor protection function ..................... Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength ................................. 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance.............................. 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) .................. At 1 m away from the air inlet Storage temperature ........................... -30 to +70C (Non-condensing) Lead wire ............................................. Red Black Sensor Yellow Mass ...................................................... 140 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Operating voltage range Rated current Rated input Model no. 9S1212H401 9S1212F401 9S1212M401 9S1212L401 9S1224M401 12 24 Rated speed Max. airflow Max. static pressure [V] [A] [W] [min-1] [m/min] [CFM] [Pa] 5.0 to 13.2 5.0 to 13.8 6.0 to 13.8 7.0 to 13.8 14 to 26.4 0.39 0.19 0.13 0.08 0.06 4.68 2.28 1.56 0.96 1.44 2700 2200 1850 1500 1850 2.45 2.0 1.66 1.36 1.66 86.5 70.6 58.6 48.1 58.6 45.2 30.0 22.7 14.9 22.7 [V] SPL [inchHO] 0.18 0.12 0.09 0.06 0.09 Operating temperature Expected life [dB (A)] [C] 36 30 24 17 24 -10 to +60 -10 to +70 [h] 40000/60C The following sensor and control options are available for selection. Available for all models. Without sensor Differs according to the model. Refer to the table on p. 578. Lock sensor PWM control Airflow - Static Pressure Characteristics 9S1212H401 9S1212F401 With pulse sensor Operating voltage range Operating voltage range (inch H2O) (Pa) 0.15 50 13.2 V 40 12 V 30 0.10 0.05 0 20 5V 10 0 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 0 20 40 60 Airflow 80 100 (CFM) 0.15 (inch H2O) (Pa) 50 0.15 13.8 V 40 Static pressure 0.20 0.20 12 V 30 5V 0.10 20 0.05 0 10 0 With pulse sensor Operating voltage range (inch H2O) (Pa) 60 Static pressure Static pressure 0.25 9S1212M401 With pulse sensor 0.5 1.0 1.5 2.0 0 10 20 30 40 50 60 70 80 Airflow 2.5 (m3/min) (CFM) 40 30 13.8 V 0.10 12 V 20 0.05 0 6V 10 0 0.5 1.0 1.5 2.0 (m3/min) 0 10 20 30 40 50 60 70 (CFM) Airflow 177 Airflow - Static Pressure Characteristics 9S1212L401 9S1224M401 With pulse sensor Operating voltage range Operating voltage range (inch H2O) (Pa) (inch H2O) (Pa) 40 0.15 Static pressure Static pressure 0.15 30 13.8 V 12 V 0.10 20 7V 0.05 0 10 0 With pulse sensor 0.5 1.0 1.5 40 30 0.10 26.4 V 20 0.05 0 2.0 (m3/min) 10 0 14 V 0.5 1.0 1.5 2.0 (m3/min) 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 (CFM) Airflow Dimensions (unit: mm) 24 V Airflow (CFM) (With ribs) 4-o4.30.3 Mounting hole 1190.5 104.80.3 Lead wire AWG24 UL 1007 (10) +30 300 0 (5) 104.80.3 1190.5 (5) +1 25 0 Airflow direction Rotating direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Outlet side Inlet side 117 4-o4.5 104.80.3 34 o1 117 26 o1 104.80.3 4-o4.5 117 104.80.3 104.80.3 117 Options Finger guards page: p. 533 Model no.: 109-019E, 109-019K, 109-019C, 109-019H Resin filter kits page: p. 540 Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI), 109-1000F30 (30PPI), 109-1000F40 (40PPI) 178 Resin finger guards Model no.: 109-1000G page: p. 539