Multilayer ceramic capacitors
Chip, C0G
Series/Type: Chip
Date: February 2009
The following products presented in this data sheet are being withdrawn.
Substitute Products: See www.epcos.com/withdrawal_mlcc
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37940K5560J070 2009-06-26 2010-06-30 2010-12-31
B37940K5560J001 2009-06-26 2010-06-30 2010-12-31
B37940K5680J060 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37940K5680J070 2009-06-26 2010-06-30 2010-12-31
B37940K5680J001 2009-06-26 2010-06-30 2010-12-31
B37940K5820J060 2009-06-26 2010-06-30 2010-12-31
B37940K5820J070 2009-06-26 2010-06-30 2010-12-31
B37940K5820J001 2009-06-26 2010-06-30 2010-12-31
B37940K5101J060 2009-06-26 2010-06-30 2010-12-31
B37940K5101J070 2009-06-26 2010-06-30 2010-12-31
B37940K5101J001 2009-06-26 2010-06-30 2010-12-31
B37940K5121J060 2009-06-26 2010-06-30 2010-12-31
B37940K5121J070 2009-06-26 2010-06-30 2010-12-31
B37940K5121J001 2009-06-26 2010-06-30 2010-12-31
B37940K5151J060 2009-06-26 2010-06-30 2010-12-31
B37940K5151J070 2009-06-26 2010-06-30 2010-12-31
B37940K5151J001 2009-06-26 2010-06-30 2010-12-31
B37940K5181J060 2009-06-26 2010-06-30 2010-12-31
B37940K5181J070 2009-06-26 2010-06-30 2010-12-31
B37940K5181J001 2009-06-26 2010-06-30 2010-12-31
B37940K5221J060 2009-06-26 2010-06-30 2010-12-31
B37940K5221J070 2009-06-26 2010-06-30 2010-12-31
B37940K5221J001 2009-06-26 2010-06-30 2010-12-31
B37940K5271J060 2009-06-26 2010-06-30 2010-12-31
B37940K5271J070 2009-06-26 2010-06-30 2010-12-31
B37940K5271J001 2009-06-26 2010-06-30 2010-12-31
B37940K5331J060 2009-06-26 2010-06-30 2010-12-31
B37940K5331J070 2009-06-26 2010-06-30 2010-12-31
B37940K5331J001 2009-06-26 2010-06-30 2010-12-31
B37940K5391J060 2009-06-26 2010-06-30 2010-12-31
B37940K5391J070 2009-06-26 2010-06-30 2010-12-31
B37940K5391J001 2009-06-26 2010-06-30 2010-12-31
B37940K5471J060 2009-06-26 2010-06-30 2010-12-31
B37940K5471J070 2009-06-26 2010-06-30 2010-12-31
B37940K5471J001 2009-06-26 2010-06-30 2010-12-31
B37940K5561J060 2009-06-26 2010-06-30 2010-12-31
B37940K5561J070 2009-06-26 2010-06-30 2010-12-31
B37930K5220J001 2009-06-26 2010-06-30 2010-12-31
B37930K5270J001 2009-06-26 2010-06-30 2010-12-31
B37930K5330J001 2009-06-26 2010-06-30 2010-12-31
B37930K5390J001 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37930K5470J001 2009-06-26 2010-06-30 2010-12-31
B37949K5332J062 2009-06-26 2010-06-30 2010-12-31
B37949K5332J072 2009-06-26 2010-06-30 2010-12-31
B37949K5472J062 2009-06-26 2010-06-30 2010-12-31
B37949K5472J072 2009-06-26 2010-06-30 2010-12-31
B37949K5682J062 2009-06-26 2010-06-30 2010-12-31
B37930K5560J001 2009-06-26 2010-06-30 2010-12-31
B37930K5680J001 2009-06-26 2010-06-30 2010-12-31
B37930K5820J001 2009-06-26 2010-06-30 2010-12-31
B37930K5101J001 2009-06-26 2010-06-30 2010-12-31
B37930K5121J001 2009-06-26 2010-06-30 2010-12-31
B37949K5682J072 2009-06-26 2010-06-30 2010-12-31
B37949K5103J062 2009-06-26 2010-06-30 2010-12-31
B37949K5103J072 2009-06-26 2010-06-30 2010-12-31
B37930K5151J001 2009-06-26 2010-06-30 2010-12-31
B37930K5181J001 2009-06-26 2010-06-30 2010-12-31
B37930K5221J001 2009-06-26 2010-06-30 2010-12-31
B37930K5271J001 2009-06-26 2010-06-30 2010-12-31
B37930K5331J001 2009-06-26 2010-06-30 2010-12-31
B37930K5391J001 2009-06-26 2010-06-30 2010-12-31
B37930K5471J001 2009-06-26 2010-06-30 2010-12-31
B37940K5561J001 2009-06-26 2010-06-30 2010-12-31
B37940K5681J060 2009-06-26 2010-06-30 2010-12-31
B37940K5681J070 2009-06-26 2010-06-30 2010-12-31
B37940K5681J001 2009-06-26 2010-06-30 2010-12-31
B37940K5821J060 2009-06-26 2010-06-30 2010-12-31
B37940K5821J070 2009-06-26 2010-06-30 2010-12-31
B37940K5821J001 2009-06-26 2010-06-30 2010-12-31
B37940K5102J060 2009-06-26 2010-06-30 2010-12-31
B37940K5102J070 2009-06-26 2010-06-30 2010-12-31
B37940K5102J001 2009-06-26 2010-06-30 2010-12-31
B37940K5122J060 2009-06-26 2010-06-30 2010-12-31
B37940K5122J070 2009-06-26 2010-06-30 2010-12-31
B37940K5152J060 2009-06-26 2010-06-30 2010-12-31
B37940K5152J070 2009-06-26 2010-06-30 2010-12-31
B37940K5182J062 2009-06-26 2010-06-30 2010-12-31
B37940K5182J072 2009-06-26 2010-06-30 2010-12-31
B37940K5222J062 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37940K5222J072 2009-06-26 2010-06-30 2010-12-31
B37940K1100J060 2009-06-26 2010-06-30 2010-12-31
B37940K1100J070 2009-06-26 2010-06-30 2010-12-31
B37940K1120J060 2009-06-26 2010-06-30 2010-12-31
B37940K1120J070 2009-06-26 2010-06-30 2010-12-31
B37940K1150J060 2009-06-26 2010-06-30 2010-12-31
B37940K1150J070 2009-06-26 2010-06-30 2010-12-31
B37940K1180J060 2009-06-26 2010-06-30 2010-12-31
B37920K5030C360 2009-06-26 2010-06-30 2010-12-31
B37920K5030C370 2009-06-26 2010-06-30 2010-12-31
B37920K5030C960 2009-06-26 2010-06-30 2010-12-31
B37920K5030C970 2009-06-26 2010-06-30 2010-12-31
B37940K1180J070 2009-06-26 2010-06-30 2010-12-31
B37940K1220J060 2009-06-26 2010-06-30 2010-12-31
B37940K1220J070 2009-06-26 2010-06-30 2010-12-31
B37940K1270J060 2009-06-26 2010-06-30 2010-12-31
B37940K1270J070 2009-06-26 2010-06-30 2010-12-31
B37920K5040C760 2009-06-26 2010-06-30 2010-12-31
B37920K5040C770 2009-06-26 2010-06-30 2010-12-31
B37920K5050D660 2009-06-26 2010-06-30 2010-12-31
B37920K5050D670 2009-06-26 2010-06-30 2010-12-31
B37920K5060D860 2009-06-26 2010-06-30 2010-12-31
B37940K1330J060 2009-06-26 2010-06-30 2010-12-31
B37940K1330J070 2009-06-26 2010-06-30 2010-12-31
B37871K5102J060 2009-06-26 2010-06-30 2010-12-31
B37940K1390J060 2009-06-26 2010-06-30 2010-12-31
B37871K5102J070 2009-06-26 2010-06-30 2010-12-31
B37940K1390J070 2009-06-26 2010-06-30 2010-12-31
B37871K5122J060 2009-06-26 2010-06-30 2010-12-31
B37940K1470J060 2009-06-26 2010-06-30 2010-12-31
B37871K5122J070 2009-06-26 2010-06-30 2010-12-31
B37920K5060D870 2009-06-26 2010-06-30 2010-12-31
B37871K5152J060 2009-06-26 2010-06-30 2010-12-31
B37920K5080D260 2009-06-26 2010-06-30 2010-12-31
B37920K5080D270 2009-06-26 2010-06-30 2010-12-31
B37920K5100J060 2009-06-26 2010-06-30 2010-12-31
B37920K5100J070 2009-06-26 2010-06-30 2010-12-31
B37940K1470J070 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37940K1560J060 2009-06-26 2010-06-30 2010-12-31
B37871K5152J070 2009-06-26 2010-06-30 2010-12-31
B37940K1560J070 2009-06-26 2010-06-30 2010-12-31
B37871K5182J060 2009-06-26 2010-06-30 2010-12-31
B37940K1680J060 2009-06-26 2010-06-30 2010-12-31
B37871K5182J070 2009-06-26 2010-06-30 2010-12-31
B37940K1680J070 2009-06-26 2010-06-30 2010-12-31
B37871K5222J060 2009-06-26 2010-06-30 2010-12-31
B37871K5222J070 2009-06-26 2010-06-30 2010-12-31
B37940K1820J060 2009-06-26 2010-06-30 2010-12-31
B37940K1820J070 2009-06-26 2010-06-30 2010-12-31
B37871K5272J060 2009-06-26 2010-06-30 2010-12-31
B37940K1101J060 2009-06-26 2010-06-30 2010-12-31
B37871K5272J070 2009-06-26 2010-06-30 2010-12-31
B37940K1101J070 2009-06-26 2010-06-30 2010-12-31
B37871K5332J060 2009-06-26 2010-06-30 2010-12-31
B37940K1121J060 2009-06-26 2010-06-30 2010-12-31
B37871K5332J070 2009-06-26 2010-06-30 2010-12-31
B37871K5392J060 2009-06-26 2010-06-30 2010-12-31
B37940K1121J070 2009-06-26 2010-06-30 2010-12-31
B37940K1151J060 2009-06-26 2010-06-30 2010-12-31
B37871K5392J070 2009-06-26 2010-06-30 2010-12-31
B37940K1151J070 2009-06-26 2010-06-30 2010-12-31
B37871K5472J062 2009-06-26 2010-06-30 2010-12-31
B37940K1181J060 2009-06-26 2010-06-30 2010-12-31
B37871K5472J072 2009-06-26 2010-06-30 2010-12-31
B37940K1181J070 2009-06-26 2010-06-30 2010-12-31
B37871K5562J062 2009-06-26 2010-06-30 2010-12-31
B37871K5562J072 2009-06-26 2010-06-30 2010-12-31
B37871K1330J060 2009-06-26 2010-06-30 2010-12-31
B37871K1330J070 2009-06-26 2010-06-30 2010-12-31
B37871K1470J060 2009-06-26 2010-06-30 2010-12-31
B37871K1470J070 2009-06-26 2010-06-30 2010-12-31
B37871K1680J060 2009-06-26 2010-06-30 2010-12-31
B37871K1680J070 2009-06-26 2010-06-30 2010-12-31
B37871K1101J060 2009-06-26 2010-06-30 2010-12-31
B37871K1101J070 2009-06-26 2010-06-30 2010-12-31
B37871K1151J060 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37871K1151J070 2009-06-26 2010-06-30 2010-12-31
B37871K1221J060 2009-06-26 2010-06-30 2010-12-31
B37871K1221J070 2009-06-26 2010-06-30 2010-12-31
B37871K1331J060 2009-06-26 2010-06-30 2010-12-31
B37871K1331J070 2009-06-26 2010-06-30 2010-12-31
B37871K1471J060 2009-06-26 2010-06-30 2010-12-31
B37871K1471J070 2009-06-26 2010-06-30 2010-12-31
B37871K1681J060 2009-06-26 2010-06-30 2010-12-31
B37871K1681J070 2009-06-26 2010-06-30 2010-12-31
B37871K1102J060 2009-06-26 2010-06-30 2010-12-31
B37871K1102J070 2009-06-26 2010-06-30 2010-12-31
B37871K1152J060 2009-06-26 2010-06-30 2010-12-31
B37871K1152J070 2009-06-26 2010-06-30 2010-12-31
B37871K1222J062 2009-06-26 2010-06-30 2010-12-31
B37871K1222J072 2009-06-26 2010-06-30 2010-12-31
B37871K5100J060 2009-06-26 2010-06-30 2010-12-31
B37871K5100J070 2009-06-26 2010-06-30 2010-12-31
B37871K5120J060 2009-06-26 2010-06-30 2010-12-31
B37871K5120J070 2009-06-26 2010-06-30 2010-12-31
B37871K5150J060 2009-06-26 2010-06-30 2010-12-31
B37871K5150J070 2009-06-26 2010-06-30 2010-12-31
B37871K5470J070 2009-06-26 2010-06-30 2010-12-31
B37871K5560J060 2009-06-26 2010-06-30 2010-12-31
B37871K5560J070 2009-06-26 2010-06-30 2010-12-31
B37871K5680J060 2009-06-26 2010-06-30 2010-12-31
B37871K5680J070 2009-06-26 2010-06-30 2010-12-31
B37871K5820J060 2009-06-26 2010-06-30 2010-12-31
B37871K5820J070 2009-06-26 2010-06-30 2010-12-31
B37871K5101J060 2009-06-26 2010-06-30 2010-12-31
B37871K5101J070 2009-06-26 2010-06-30 2010-12-31
B37871K5121J060 2009-06-26 2010-06-30 2010-12-31
B37871K5121J070 2009-06-26 2010-06-30 2010-12-31
B37871K5151J060 2009-06-26 2010-06-30 2010-12-31
B37871K5151J070 2009-06-26 2010-06-30 2010-12-31
B37871K5181J060 2009-06-26 2010-06-30 2010-12-31
B37871K5181J070 2009-06-26 2010-06-30 2010-12-31
B37871K5221J060 2009-06-26 2010-06-30 2010-12-31
B37871K5221J070 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37871K5271J060 2009-06-26 2010-06-30 2010-12-31
B37871K5271J070 2009-06-26 2010-06-30 2010-12-31
B37871K5331J060 2009-06-26 2010-06-30 2010-12-31
B37871K5331J070 2009-06-26 2010-06-30 2010-12-31
B37871K5391J060 2009-06-26 2010-06-30 2010-12-31
B37871K5391J070 2009-06-26 2010-06-30 2010-12-31
B37871K5471J060 2009-06-26 2010-06-30 2010-12-31
B37871K5471J070 2009-06-26 2010-06-30 2010-12-31
B37871K5561J060 2009-06-26 2010-06-30 2010-12-31
B37871K5561J070 2009-06-26 2010-06-30 2010-12-31
B37871K5681J060 2009-06-26 2010-06-30 2010-12-31
B37871K5681J070 2009-06-26 2010-06-30 2010-12-31
B37871K5821J060 2009-06-26 2010-06-30 2010-12-31
B37871K5821J070 2009-06-26 2010-06-30 2010-12-31
B37920K5120J060 2009-06-26 2010-06-30 2010-12-31
B37920K5120J070 2009-06-26 2010-06-30 2010-12-31
B37920K5150J060 2009-06-26 2010-06-30 2010-12-31
B37920K5150J070 2009-06-26 2010-06-30 2010-12-31
B37920K5180J060 2009-06-26 2010-06-30 2010-12-31
B37920K5180J070 2009-06-26 2010-06-30 2010-12-31
B37920K5220J060 2009-06-26 2010-06-30 2010-12-31
B37920K5220J070 2009-06-26 2010-06-30 2010-12-31
B37920K5270J060 2009-06-26 2010-06-30 2010-12-31
B37920K5270J070 2009-06-26 2010-06-30 2010-12-31
B37920K5330J060 2009-06-26 2010-06-30 2010-12-31
B37920K5330J070 2009-06-26 2010-06-30 2010-12-31
B37920K5390J060 2009-06-26 2010-06-30 2010-12-31
B37920K5390J070 2009-06-26 2010-06-30 2010-12-31
B37920K5470J060 2009-06-26 2010-06-30 2010-12-31
B37940K1221J060 2009-06-26 2010-06-30 2010-12-31
B37940K1221J070 2009-06-26 2010-06-30 2010-12-31
B37940K1271J060 2009-06-26 2010-06-30 2010-12-31
B37940K1271J070 2009-06-26 2010-06-30 2010-12-31
B37940K1331J060 2009-06-26 2010-06-30 2010-12-31
B37920K5470J070 2009-06-26 2010-06-30 2010-12-31
B37920K5560J060 2009-06-26 2010-06-30 2010-12-31
B37920K5560J070 2009-06-26 2010-06-30 2010-12-31
B37920K5680J060 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37920K5680J070 2009-06-26 2010-06-30 2010-12-31
B37940K1331J070 2009-06-26 2010-06-30 2010-12-31
B37940K1391J060 2009-06-26 2010-06-30 2010-12-31
B37940K1391J070 2009-06-26 2010-06-30 2010-12-31
B37940K1471J060 2009-06-26 2010-06-30 2010-12-31
B37940K1471J070 2009-06-26 2010-06-30 2010-12-31
B37920K5820J060 2009-06-26 2010-06-30 2010-12-31
B37920K5820J070 2009-06-26 2010-06-30 2010-12-31
B37920K5101J060 2009-06-26 2010-06-30 2010-12-31
B37920K5101J070 2009-06-26 2010-06-30 2010-12-31
B37930K5010C060 2009-06-26 2010-06-30 2010-12-31
B37930K5010C070 2009-06-26 2010-06-30 2010-12-31
B37940K1561J060 2009-06-26 2010-06-30 2010-12-31
B37940K1561J070 2009-06-26 2010-06-30 2010-12-31
B37940K1681J060 2009-06-26 2010-06-30 2010-12-31
B37940K1681J070 2009-06-26 2010-06-30 2010-12-31
B37940K1821J062 2009-06-26 2010-06-30 2010-12-31
B37930K5010C260 2009-06-26 2010-06-30 2010-12-31
B37930K5010C270 2009-06-26 2010-06-30 2010-12-31
B37930K5010C560 2009-06-26 2010-06-30 2010-12-31
B37930K5010C570 2009-06-26 2010-06-30 2010-12-31
B37930K5010C860 2009-06-26 2010-06-30 2010-12-31
B37940K1821J072 2009-06-26 2010-06-30 2010-12-31
B37940K1102J062 2009-06-26 2010-06-30 2010-12-31
B37940K1102J072 2009-06-26 2010-06-30 2010-12-31
B37940K2101J060 2009-06-26 2010-06-30 2010-12-31
B37940K2101J070 2009-06-26 2010-06-30 2010-12-31
B37930K5010C870 2009-06-26 2010-06-30 2010-12-31
B37930K5020C260 2009-06-26 2010-06-30 2010-12-31
B37930K5020C270 2009-06-26 2010-06-30 2010-12-31
B37930K5020C760 2009-06-26 2010-06-30 2010-12-31
B37930K5020C770 2009-06-26 2010-06-30 2010-12-31
B37940K2151J060 2009-06-26 2010-06-30 2010-12-31
B37940K2151J070 2009-06-26 2010-06-30 2010-12-31
B37940K2221J060 2009-06-26 2010-06-30 2010-12-31
B37940K2221J070 2009-06-26 2010-06-30 2010-12-31
B37940K5010C060 2009-06-26 2010-06-30 2010-12-31
B37930K5030C360 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37930K5030C370 2009-06-26 2010-06-30 2010-12-31
B37930K5030C960 2009-06-26 2010-06-30 2010-12-31
B37930K5030C970 2009-06-26 2010-06-30 2010-12-31
B37930K5040C760 2009-06-26 2010-06-30 2010-12-31
B37940K5010C070 2009-06-26 2010-06-30 2010-12-31
B37940K5010C001 2009-06-26 2010-06-30 2010-12-31
B37940K5010C260 2009-06-26 2010-06-30 2010-12-31
B37940K5010C270 2009-06-26 2010-06-30 2010-12-31
B37940K5010C201 2009-06-26 2010-06-30 2010-12-31
B37930K5040C770 2009-06-26 2010-06-30 2010-12-31
B37930K5050D660 2009-06-26 2010-06-30 2010-12-31
B37930K5050D670 2009-06-26 2010-06-30 2010-12-31
B37930K5060D860 2009-06-26 2010-06-30 2010-12-31
B37930K5060D870 2009-06-26 2010-06-30 2010-12-31
B37940K5010C560 2009-06-26 2010-06-30 2010-12-31
B37940K5010C570 2009-06-26 2010-06-30 2010-12-31
B37871K5180J060 2009-06-26 2010-06-30 2010-12-31
B37940K5010C501 2009-06-26 2010-06-30 2010-12-31
B37871K5180J070 2009-06-26 2010-06-30 2010-12-31
B37940K5010C860 2009-06-26 2010-06-30 2010-12-31
B37871K5220J060 2009-06-26 2010-06-30 2010-12-31
B37940K5010C870 2009-06-26 2010-06-30 2010-12-31
B37871K5220J070 2009-06-26 2010-06-30 2010-12-31
B37871K5270J060 2009-06-26 2010-06-30 2010-12-31
B37930K5080D260 2009-06-26 2010-06-30 2010-12-31
B37930K5080D270 2009-06-26 2010-06-30 2010-12-31
B37930K5100J060 2009-06-26 2010-06-30 2010-12-31
B37930K5100J070 2009-06-26 2010-06-30 2010-12-31
B37930K5120J060 2009-06-26 2010-06-30 2010-12-31
B37940K5010C801 2009-06-26 2010-06-30 2010-12-31
B37940K5020C260 2009-06-26 2010-06-30 2010-12-31
B37871K5270J070 2009-06-26 2010-06-30 2010-12-31
B37871K5330J060 2009-06-26 2010-06-30 2010-12-31
B37871K5330J070 2009-06-26 2010-06-30 2010-12-31
B37871K5390J060 2009-06-26 2010-06-30 2010-12-31
B37871K5390J070 2009-06-26 2010-06-30 2010-12-31
B37930K5120J070 2009-06-26 2010-06-30 2010-12-31
B37930K5150J060 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37930K5150J070 2009-06-26 2010-06-30 2010-12-31
B37930K5180J060 2009-06-26 2010-06-30 2010-12-31
B37930K5180J070 2009-06-26 2010-06-30 2010-12-31
B37871K5470J060 2009-06-26 2010-06-30 2010-12-31
B37940K5020C270 2009-06-26 2010-06-30 2010-12-31
B37940K5020C201 2009-06-26 2010-06-30 2010-12-31
B37940K5020C760 2009-06-26 2010-06-30 2010-12-31
B37940K5020C770 2009-06-26 2010-06-30 2010-12-31
B37940K5020C701 2009-06-26 2010-06-30 2010-12-31
B37940K5030C360 2009-06-26 2010-06-30 2010-12-31
B37940K5030C370 2009-06-26 2010-06-30 2010-12-31
B37940K5030C301 2009-06-26 2010-06-30 2010-12-31
B37940K5030C960 2009-06-26 2010-06-30 2010-12-31
B37940K5030C970 2009-06-26 2010-06-30 2010-12-31
B37940K5030C901 2009-06-26 2010-06-30 2010-12-31
B37940K5040C760 2009-06-26 2010-06-30 2010-12-31
B37940K5040C770 2009-06-26 2010-06-30 2010-12-31
B37940K5040C701 2009-06-26 2010-06-30 2010-12-31
B37940K5050D660 2009-06-26 2010-06-30 2010-12-31
B37940K5050D670 2009-06-26 2010-06-30 2010-12-31
B37940K5050D601 2009-06-26 2010-06-30 2010-12-31
B37940K5060D860 2009-06-26 2010-06-30 2010-12-31
B37940K5060D870 2009-06-26 2010-06-30 2010-12-31
B37940K5060D801 2009-06-26 2010-06-30 2010-12-31
B37940K5080D260 2009-06-26 2010-06-30 2010-12-31
B37940K5080D270 2009-06-26 2010-06-30 2010-12-31
B37940K5080D201 2009-06-26 2010-06-30 2010-12-31
B37940K5100J060 2009-06-26 2010-06-30 2010-12-31
B37940K5100J070 2009-06-26 2010-06-30 2010-12-31
B37940K5100J001 2009-06-26 2010-06-30 2010-12-31
B37940K5120J060 2009-06-26 2010-06-30 2010-12-31
B37940K5120J070 2009-06-26 2010-06-30 2010-12-31
B37940K5120J001 2009-06-26 2010-06-30 2010-12-31
B37940K5150J060 2009-06-26 2010-06-30 2010-12-31
B37940K5150J070 2009-06-26 2010-06-30 2010-12-31
B37940K5150J001 2009-06-26 2010-06-30 2010-12-31
B37940K5180J060 2009-06-26 2010-06-30 2010-12-31
B37940K5180J070 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37940K5180J001 2009-06-26 2010-06-30 2010-12-31
B37940K5220J060 2009-06-26 2010-06-30 2010-12-31
B37940K5220J070 2009-06-26 2010-06-30 2010-12-31
B37940K5220J001 2009-06-26 2010-06-30 2010-12-31
B37930K5220J060 2009-06-26 2010-06-30 2010-12-31
B37930K5220J070 2009-06-26 2010-06-30 2010-12-31
B37930K5270J060 2009-06-26 2010-06-30 2010-12-31
B37930K5270J070 2009-06-26 2010-06-30 2010-12-31
B37930K5330J060 2009-06-26 2010-06-30 2010-12-31
B37930K5330J070 2009-06-26 2010-06-30 2010-12-31
B37930K5390J060 2009-06-26 2010-06-30 2010-12-31
B37930K5390J070 2009-06-26 2010-06-30 2010-12-31
B37930K5470J060 2009-06-26 2010-06-30 2010-12-31
B37930K5470J070 2009-06-26 2010-06-30 2010-12-31
B37930K5560J060 2009-06-26 2010-06-30 2010-12-31
B37930K5560J070 2009-06-26 2010-06-30 2010-12-31
B37930K5680J060 2009-06-26 2010-06-30 2010-12-31
B37930K5680J070 2009-06-26 2010-06-30 2010-12-31
B37930K5820J060 2009-06-26 2010-06-30 2010-12-31
B37930K5820J070 2009-06-26 2010-06-30 2010-12-31
B37930K5101J060 2009-06-26 2010-06-30 2010-12-31
B37930K5101J070 2009-06-26 2010-06-30 2010-12-31
B37930K5121J060 2009-06-26 2010-06-30 2010-12-31
B37930K5121J070 2009-06-26 2010-06-30 2010-12-31
B37930K5151J060 2009-06-26 2010-06-30 2010-12-31
B37930K5151J070 2009-06-26 2010-06-30 2010-12-31
B37930K5181J060 2009-06-26 2010-06-30 2010-12-31
B37930K5181J070 2009-06-26 2010-06-30 2010-12-31
B37930K5221J060 2009-06-26 2010-06-30 2010-12-31
B37930K5221J070 2009-06-26 2010-06-30 2010-12-31
B37930K5271J060 2009-06-26 2010-06-30 2010-12-31
B37930K5271J070 2009-06-26 2010-06-30 2010-12-31
B37930K5331J060 2009-06-26 2010-06-30 2010-12-31
B37930K5331J070 2009-06-26 2010-06-30 2010-12-31
B37930K5391J060 2009-06-26 2010-06-30 2010-12-31
B37930K5391J070 2009-06-26 2010-06-30 2010-12-31
B37930K5471J060 2009-06-26 2010-06-30 2010-12-31
B37930K5471J070 2009-06-26 2010-06-30 2010-12-31
Ordering Code Substitute Product Date of
Withdrawal Deadline Last
Orders Last Shipments
B37930K5010C001 2009-06-26 2010-06-30 2010-12-31
B37930K5010C201 2009-06-26 2010-06-30 2010-12-31
B37930K5010C501 2009-06-26 2010-06-30 2010-12-31
B37930K5010C801 2009-06-26 2010-06-30 2010-12-31
B37930K5020C201 2009-06-26 2010-06-30 2010-12-31
B37930K5020C701 2009-06-26 2010-06-30 2010-12-31
B37940K5270J060 2009-06-26 2010-06-30 2010-12-31
B37940K5270J070 2009-06-26 2010-06-30 2010-12-31
B37940K5270J001 2009-06-26 2010-06-30 2010-12-31
B37940K5330J060 2009-06-26 2010-06-30 2010-12-31
B37940K5330J070 2009-06-26 2010-06-30 2010-12-31
B37930K5030C301 2009-06-26 2010-06-30 2010-12-31
B37930K5030C901 2009-06-26 2010-06-30 2010-12-31
B37930K5040C701 2009-06-26 2010-06-30 2010-12-31
B37930K5050D601 2009-06-26 2010-06-30 2010-12-31
B37930K5060D801 2009-06-26 2010-06-30 2010-12-31
B37940K5330J001 2009-06-26 2010-06-30 2010-12-31
B37940K5390J060 2009-06-26 2010-06-30 2010-12-31
B37940K5390J070 2009-06-26 2010-06-30 2010-12-31
B37940K5390J001 2009-06-26 2010-06-30 2010-12-31
B37940K5470J060 2009-06-26 2010-06-30 2010-12-31
B37930K5080D201 2009-06-26 2010-06-30 2010-12-31
B37930K5100J001 2009-06-26 2010-06-30 2010-12-31
B37930K5120J001 2009-06-26 2010-06-30 2010-12-31
B37930K5150J001 2009-06-26 2010-06-30 2010-12-31
B37930K5180J001 2009-06-26 2010-06-30 2010-12-31
B37940K5470J070 2009-06-26 2010-06-30 2010-12-31
B37940K5470J001 2009-06-26 2010-06-30 2010-12-31
B37940K5560J060 2009-06-26 2010-06-30 2010-12-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Ordering code system
B37940 K 5 010 C 5 60
Type and size
Chip size (inch/mm) = Temperature characteristic C0G:
0402/1005 B37920
0603/1608 B37930
0805/2012 B37940
1206/3216 B37871
1210/3225 B37949
Termination
Standard:
Knickel barrier for all case sizes
On request:
Jsilver-palladium for conductive adhesion for all case sizes
Rated voltage
5 (Code) 50 VDC
1 (Code) 100 VDC
2 (Code) 200 VDC
Capacitance, coded (example)
010 1100pF = 1 pF
100 10 100pF = 10 pF
221 22 101pF = 220 pF
Capacitance tolerance
CR<10 pF:
B±0.1 pF
C±0.25 pF (standard for capacitance values ≤4.7 pF)
D±0.5 pF (standard for capacitance values ≤8.2 pF)
CR≥10 pF:
F±1%
G±2%
J±5% (standard)
K±10%
Decimal place for cap. values < 10 pF, otherwise 0
Packaging
60 cardboard tape, 180-mm reel
62 blister tape, 180-mm reel
70 cardboard tape, 330-mm reel
72 blister tape, 330-mm reel
01 bulk case
Multilayer ceramic capacitors Chip
C0G
Page 2 of 22Please read Cautions and warnings and
Important notes at the end of this document.
1) For CR>10 nF the time constant τ= C Rins is given.
Features
Good thermal stability
High insulation resistance
Low dissipation factor
Low inductance
Based on AEC-Q200 Rev-C
Applications
Resonant circuits
Filter circuits
Timing elements
Coupling and filtering, particularly in RF circuits
Termination
Nickel barrier terminations (Ni) for lead-free soldering
For conductive adhesion: Silver-palladium terminations (AgPd) on request
Options
Alternative capacitance values and tolerances available on request
Delivery mode
Cardboard and blister tape (blister tape for chip thickness ≥1.2 ±0.1 mm and case size
1210), 180-mm and 330-mm reel available
Bulk case for case sizes 0402, 0603 (50 V) and 0805 (50 V)
Electrical data
Temperature characteristic C0G
Climatic category (IEC 60068-1) 55/125/56
Standard EIA
Dielectric Class 1
Rated voltage VR50, 100, 200 VDC
Test voltage Vtest 2.5 VR/5 s VDC
Capacitance range CR1 pF ... 10 nF (E6/E12)
Temperature coefficient 0 ±30 10-6/K
Dissipation factor (limit value) tan δ< 1.0 10-3
Insulation resistance1) (at +25 °C) Rins > 105MΩ
Insulation resistance1) (at +125 °C) Rins > 104MΩ
Time constant1) (at +25 °C) τ> 1000 s
Time constant1) (at +125 °C) τ> 100 s
Operating temperature range Top 55 ... +125 °C
Ageing none
Multilayer ceramic capacitors
C0G
Page 3 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Capacitance tolerances
CR≤4.7 pF 5.6 pF ≤CR≤8.2 pF
Code letter B C (standard) D B C D (standard)
Tolerance ±0.1 pF
(on request) ±0.25 pF ±0.5 pF ±0.1 pF
(on request) ±0.25 pF
(on request) ±0.5 pF
CR≥10 pF
Code letter F G J (standard) K
Tolerance ±1% (on request for
50 V and 100 V; not
available for 200 V)
±2% (on request for
50 V and 100 V; not
available for 200 V)
±5% ±10%
Dimensional drawing
Dimensions (mm)
Case size (inch)
(mm)
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
l 1.00 ±0.10 1.60 ±0.15 2.00 ±0.20 3.20 ±0.20 3.20 ±0.30
w 0.50 ±0.05 0.80 ±0.10 1.25 ±0.15 1.60 ±0.15 2.50 ±0.30
th 0.50 ±0.05 0.80 ±0.10 1.30 max. 1.30 max. 1.70 max.
k 0.10 0.40 0.10 0.40 0.13 0.75 0.25 0.75 0.25 0.75
Tolerances to CECC 32101-801
Multilayer ceramic capacitors
C0G
Page 4 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Recommended solder pad
Recommended dimensions (mm) for reflow soldering
Case size (inch/mm) Type A C D
0402/1005 single chip 0.35 ... 0.45 1.00 ... 1.40 0.40 ... 0.60
0603/1608 single chip 0.60 ... 0.70 1.80 ... 2.20 0.60 ... 0.80
0805/2012 single chip 0.60 ... 0.70 2.20 ... 2.60 0.80 ... 1.10
1206/3216 single chip 0.80 ... 0.90 3.80 ... 4.32 1.00 ... 1.40
1210/3225 single chip 1.00 ... 1.20 4.00 ... 4.80 1.80 ... 2.30
Recommended dimensions (mm) for wave soldering
Case size (inch/mm) Type A C D
0603/1608 single chip 0.80 ... 0.90 2.20 ... 2.80 0.60 ... 0.80
0805/2012 single chip 0.90 ... 1.00 2.80 ... 3.20 0.80 ... 1.10
1206/3216 single chip 1.00 ... 1.10 4.20 ... 4.80 1.00 ... 1.40
Termination
Multilayer ceramic capacitors
C0G
Page 5 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Product range chip capacitors, C0G
Size
inch (l x w)
mm (l x w)
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
Type B37920 B37930 B37940 B37871 B37949
CR\ VR(VDC) 50 50 50 100 200 50 100 50
1.0 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
Multilayer ceramic capacitors
C0G
Page 6 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Product range chip capacitors, C0G
Size
inch (l x w)
mm (l x w)
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
Type B37920 B37930 B37940 B37871 B37949
CR\ VR(VDC) 50 50 50 100 200 50 100 50
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
10 nF
Multilayer ceramic capacitors
C0G
Page 7 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0402, 50 VDC
Chip thickness Cardboard tape,
∅180-mm reel
Cardboard tape,
∅330-mm reel
** 60 ** 70
CROrdering code mm pcs./reel pcs./reel
3.3 pF B37920K5030C3** 0.5 ±0.05 10000 50000
3.9 pF B37920K5030C9** 0.5 ±0.05 10000 50000
4.7 pF B37920K5040C7** 0.5 ±0.05 10000 50000
5.6 pF B37920K5050D6** 0.5 ±0.05 10000 50000
6.8 pF B37920K5060D8** 0.5 ±0.05 10000 50000
8.2 pF B37920K5080D2** 0.5 ±0.05 10000 50000
10 pF B37920K5100J0** 0.5 ±0.05 10000 50000
12 pF B37920K5120J0** 0.5 ±0.05 10000 50000
15 pF B37920K5150J0** 0.5 ±0.05 10000 50000
18 pF B37920K5180J0** 0.5 ±0.05 10000 50000
22 pF B37920K5220J0** 0.5 ±0.05 10000 50000
27 pF B37920K5270J0** 0.5 ±0.05 10000 50000
33 pF B37920K5330J0** 0.5 ±0.05 10000 50000
39 pF B37920K5390J0** 0.5 ±0.05 10000 50000
47 pF B37920K5470J0** 0.5 ±0.05 10000 50000
56 pF B37920K5560J0** 0.5 ±0.05 10000 50000
68 pF B37920K5680J0** 0.5 ±0.05 10000 50000
82 pF B37920K5820J0** 0.5 ±0.05 10000 50000
100 pF B37920K5101J0** 0.5 ±0.05 10000 50000
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0603, 50 VDC
Chip thickness Cardboard
tape, ∅180-mm
reel
Cardboard
tape, ∅330-mm
reel
Bulk case
** 60 ** 70 ** 01
CROrdering code mm pcs./reel pcs./reel pcs.
1.0 pF B37930K5010C0** 0.8 ±0.1 4000 16000 15000
1.2 pF B37930K5010C2** 0.8 ±0.1 4000 16000 15000
1.5 pF B37930K5010C5** 0.8 ±0.1 4000 16000 15000
1.8 pF B37930K5010C8** 0.8 ±0.1 4000 16000 15000
2.2 pF B37930K5020C2** 0.8 ±0.1 4000 16000 15000
Multilayer ceramic capacitors
C0G
Page 8 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0603, 50 VDC
Chip thickness Cardboard
tape, ∅180-mm
reel
Cardboard
tape, ∅330-mm
reel
Bulk case
** 60 ** 70 ** 01
CROrdering code mm pcs./reel pcs./reel pcs.
2.7 pF B37930K5020C7** 0.8 ±0.1 4000 16000 15000
3.3 pF B37930K5030C3** 0.8 ±0.1 4000 16000 15000
3.9 pF B37930K5030C9** 0.8 ±0.1 4000 16000 15000
4.7 pF B37930K5040C7** 0.8 ±0.1 4000 16000 15000
5.6 pF B37930K5050D6** 0.8 ±0.1 4000 16000 15000
6.8 pF B37930K5060D8** 0.8 ±0.1 4000 16000 15000
8.2 pF B37930K5080D2** 0.8 ±0.1 4000 16000 15000
10 pF B37930K5100J0** 0.8 ±0.1 4000 16000 15000
12 pF B37930K5120J0** 0.8 ±0.1 4000 16000 15000
15 pF B37930K5150J0** 0.8 ±0.1 4000 16000 15000
18 pF B37930K5180J0** 0.8 ±0.1 4000 16000 15000
22 pF B37930K5220J0** 0.8 ±0.1 4000 16000 15000
27 pF B37930K5270J0** 0.8 ±0.1 4000 16000 15000
33 pF B37930K5330J0** 0.8 ±0.1 4000 16000 15000
39 pF B37930K5390J0** 0.8 ±0.1 4000 16000 15000
47 pF B37930K5470J0** 0.8 ±0.1 4000 16000 15000
56 pF B37930K5560J0** 0.8 ±0.1 4000 16000 15000
68 pF B37930K5680J0** 0.8 ±0.1 4000 16000 15000
82 pF B37930K5820J0** 0.8 ±0.1 4000 16000 15000
100 pF B37930K5101J0** 0.8 ±0.1 4000 16000 15000
120 pF B37930K5121J0** 0.8 ±0.1 4000 16000 15000
150 pF B37930K5151J0** 0.8 ±0.1 4000 16000 15000
180 pF B37930K5181J0** 0.8 ±0.1 4000 16000 15000
220 pF B37930K5221J0** 0.8 ±0.1 4000 16000 15000
270 pF B37930K5271J0** 0.8 ±0.1 4000 16000 15000
330 pF B37930K5331J0** 0.8 ±0.1 4000 16000 15000
390 pF B37930K5391J0** 0.8 ±0.1 4000 16000 15000
470 pF B37930K5471J0** 0.8 ±0.1 4000 16000 15000
Multilayer ceramic capacitors
C0G
Page 9 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0805, 50 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister
tape,
∅180-mm
reel
Blister
tape,
∅330-mm
reel
Bulk
case
** 60 ** 70 ** 62 ** 72 ** 01
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel pcs.
1.0 pF B37940K5010C0** 0.6 ±0.1 5000 20000 10000
1.2 pF B37940K5010C2** 0.6 ±0.1 5000 20000 10000
1.5 pF B37940K5010C5** 0.6 ±0.1 5000 20000 10000
1.8 pF B37940K5010C8** 0.6 ±0.1 5000 20000 10000
2.2 pF B37940K5020C2** 0.6 ±0.1 5000 20000 10000
2.7 pF B37940K5020C7** 0.6 ±0.1 5000 20000 10000
3.3 pF B37940K5030C3** 0.6 ±0.1 5000 20000 10000
3.9 pF B37940K5030C9** 0.6 ±0.1 5000 20000 10000
4.7 pF B37940K5040C7** 0.6 ±0.1 5000 20000 10000
5.6 pF B37940K5050D6** 0.6 ±0.1 5000 20000 10000
6.8 pF B37940K5060D8** 0.6 ±0.1 5000 20000 10000
8.2 pF B37940K5080D2** 0.6 ±0.1 5000 20000 10000
10 pF B37940K5100J0** 0.6 ±0.1 5000 20000 10000
12 pF B37940K5120J0** 0.6 ±0.1 5000 20000 10000
15 pF B37940K5150J0** 0.6 ±0.1 5000 20000 10000
18 pF B37940K5180J0** 0.6 ±0.1 5000 20000 10000
22 pF B37940K5220J0** 0.6 ±0.1 5000 20000 10000
27 pF B37940K5270J0** 0.6 ±0.1 5000 20000 10000
33 pF B37940K5330J0** 0.6 ±0.1 5000 20000 10000
39 pF B37940K5390J0** 0.6 ±0.1 5000 20000 10000
47 pF B37940K5470J0** 0.6 ±0.1 5000 20000 10000
56 pF B37940K5560J0** 0.6 ±0.1 5000 20000 10000
68 pF B37940K5680J0** 0.6 ±0.1 5000 20000 10000
82 pF B37940K5820J0** 0.6 ±0.1 5000 20000 10000
100 pF B37940K5101J0** 0.6 ±0.1 5000 20000 10000
120 pF B37940K5121J0** 0.6 ±0.1 5000 20000 10000
150 pF B37940K5151J0** 0.6 ±0.1 5000 20000 10000
180 pF B37940K5181J0** 0.6 ±0.1 5000 20000 10000
220 pF B37940K5221J0** 0.6 ±0.1 5000 20000 10000
270 pF B37940K5271J0** 0.6 ±0.1 5000 20000 10000
330 pF B37940K5331J0** 0.6 ±0.1 5000 20000 10000
Multilayer ceramic capacitors
C0G
Page 10 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0805, 50 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister
tape,
∅180-mm
reel
Blister
tape,
∅330-mm
reel
Bulk
case
** 60 ** 70 ** 62 ** 72 ** 01
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel pcs.
390 pF B37940K5391J0** 0.6 ±0.1 5000 20000 10000
470 pF B37940K5471J0** 0.6 ±0.1 5000 20000 10000
560 pF B37940K5561J0** 0.6 ±0.1 5000 20000 10000
680 pF B37940K5681J0** 0.6 ±0.1 5000 20000 10000
820 pF B37940K5821J0** 0.6 ±0.1 5000 20000 10000
1.0 nF B37940K5102J0** 0.6 ±0.1 5000 20000 10000
1.2 nF B37940K5122J0** 0.8 ±0.1 4000 16000
1.5 nF B37940K5152J0** 0.8 ±0.1 4000 16000
1.8 nF B37940K5182J0** 1.2 ±0.1 3000 12000
2.2 nF B37940K5222J0** 1.2 ±0.1 3000 12000
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0805, 100 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister tape,
∅180-mm
reel
Blister tape,
∅330-mm
reel
** 60 ** 70 ** 62 ** 72
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel
10 pF B37940K1100J0** 0.6 ±0.1 5000 20000
12 pF B37940K1120J0** 0.6 ±0.1 5000 20000
15 pF B37940K1150J0** 0.6 ±0.1 5000 20000
18 pF B37940K1180J0** 0.6 ±0.1 5000 20000
22 pF B37940K1220J0** 0.6 ±0.1 5000 20000
27 pF B37940K1270J0** 0.6 ±0.1 5000 20000
33 pF B37940K1330J0** 0.6 ±0.1 5000 20000
39 pF B37940K1390J0** 0.6 ±0.1 5000 20000
47 pF B37940K1470J0** 0.6 ±0.1 5000 20000
56 pF B37940K1560J0** 0.6 ±0.1 5000 20000
68 pF B37940K1680J0** 0.6 ±0.1 5000 20000
Multilayer ceramic capacitors
C0G
Page 11 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0805, 100 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister tape,
∅180-mm
reel
Blister tape,
∅330-mm
reel
** 60 ** 70 ** 62 ** 72
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel
82 pF B37940K1820J0** 0.6 ±0.1 5000 20000
100 pF B37940K1101J0** 0.6 ±0.1 5000 20000
120 pF B37940K1121J0** 0.6 ±0.1 5000 20000
150 pF B37940K1151J0** 0.6 ±0.1 5000 20000
180 pF B37940K1181J0** 0.6 ±0.1 5000 20000
220 pF B37940K1221J0** 0.6 ±0.1 5000 20000
270 pF B37940K1271J0** 0.6 ±0.1 5000 20000
330 pF B37940K1331J0** 0.6 ±0.1 5000 20000
390 pF B37940K1391J0** 0.6 ±0.1 5000 20000
470 pF B37940K1471J0** 0.6 ±0.1 5000 20000
560 pF B37940K1561J0** 0.8 ±0.1 4000 16000
680 pF B37940K1681J0** 0.8 ±0.1 4000 16000
820 pF B37940K1821J0** 1.2 ±0.1 3000 12000
1.0 nF B37940K1102J0** 1.2 ±0.1 3000 12000
Ordering codes and packing for C0G, 200 VDC, nickel barrier terminations
Case size 0805, 200 VDC
Chip thickness Cardboard tape,
∅180-mm reel
Cardboard tape,
∅330-mm reel
** 60 ** 70
CROrdering code mm pcs./reel pcs./reel
100 pF B37940K2101J0** 0.6 ±0.1 5000 20000
150 pF B37940K2151J0** 0.8 ±0.1 4000 16000
220 pF B37940K2221J0** 0.8 ±0.1 4000 16000
Multilayer ceramic capacitors
C0G
Page 12 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1206, 50 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister tape,
∅180-mm
reel
Blister tape,
∅330-mm
reel
** 60 ** 70 ** 62 ** 72
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel
10 pF B37871K5100J0** 0.8 ±0.1 4000 16000
12 pF B37871K5120J0** 0.8 ±0.1 4000 16000
15 pF B37871K5150J0** 0.8 ±0.1 4000 16000
18 pF B37871K5180J0** 0.8 ±0.1 4000 16000
22 pF B37871K5220J0** 0.8 ±0.1 4000 16000
27 pF B37871K5270J0** 0.8 ±0.1 4000 16000
33 pF B37871K5330J0** 0.8 ±0.1 4000 16000
39 pF B37871K5390J0** 0.8 ±0.1 4000 16000
47 pF B37871K5470J0** 0.8 ±0.1 4000 16000
56 pF B37871K5560J0** 0.8 ±0.1 4000 16000
68 pF B37871K5680J0** 0.8 ±0.1 4000 16000
82 pF B37871K5820J0** 0.8 ±0.1 4000 16000
100 pF B37871K5101J0** 0.8 ±0.1 4000 16000
120 pF B37871K5121J0** 0.8 ±0.1 4000 16000
150 pF B37871K5151J0** 0.8 ±0.1 4000 16000
180 pF B37871K5181J0** 0.8 ±0.1 4000 16000
220 pF B37871K5221J0** 0.8 ±0.1 4000 16000
270 pF B37871K5271J0** 0.8 ±0.1 4000 16000
330 pF B37871K5331J0** 0.8 ±0.1 4000 16000
390 pF B37871K5391J0** 0.8 ±0.1 4000 16000
470 pF B37871K5471J0** 0.8 ±0.1 4000 16000
560 pF B37871K5561J0** 0.8 ±0.1 4000 16000
680 pF B37871K5681J0** 0.8 ±0.1 4000 16000
820 pF B37871K5821J0** 0.8 ±0.1 4000 16000
1.0 nF B37871K5102J0** 0.8 ±0.1 4000 16000
1.2 nF B37871K5122J0** 0.8 ±0.1 4000 16000
1.5 nF B37871K5152J0** 0.8 ±0.1 4000 16000
1.8 nF B37871K5182J0** 0.8 ±0.1 4000 16000
2.2 nF B37871K5222J0** 0.8 ±0.1 4000 16000
2.7 nF B37871K5272J0** 0.8 ±0.1 4000 16000
3.3 nF B37871K5332J0** 0.8 ±0.1 4000 16000
Multilayer ceramic capacitors
C0G
Page 13 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1206, 50 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister tape,
∅180-mm
reel
Blister tape,
∅330-mm
reel
** 60 ** 70 ** 62 ** 72
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel
3.9 nF B37871K5392J0** 0.8 ±0.1 4000 16000
4.7 nF B37871K5472J0** 1.2 ±0.1 3000 12000
5.6 nF B37871K5562J0** 1.2 ±0.1 3000 12000
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 1206, 100 VDC
Chip
thickness
Cardboard
tape,
∅180-mm
reel
Cardboard
tape,
∅330-mm
reel
Blister tape,
∅180-mm
reel
Blister tape,
∅330-mm
reel
** 60 ** 70 ** 62 ** 72
CROrdering code mm pcs./reel pcs./reel pcs./reel pcs./reel
33 pF B37871K1330J0** 0.8 ±0.1 4000 16000
47 pF B37871K1470J0** 0.8 ±0.1 4000 16000
68 pF B37871K1680J0** 0.8 ±0.1 4000 16000
100 pF B37871K1101J0** 0.8 ±0.1 4000 16000
150 pF B37871K1151J0** 0.8 ±0.1 4000 16000
220 pF B37871K1221J0** 0.8 ±0.1 4000 16000
330 pF B37871K1331J0** 0.8 ±0.1 4000 16000
470 pF B37871K1471J0** 0.8 ±0.1 4000 16000
680 pF B37871K1681J0** 0.8 ±0.1 4000 16000
1.0 nF B37871K1102J0** 0.8 ±0.1 4000 16000
1.5 nF B37871K1152J0** 0.8 ±0.1 4000 16000
2.2 nF B37871K1222J0** 1.2 ±0.1 3000 12000
Multilayer ceramic capacitors
C0G
Page 14 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1210, 50 VDC
Chip thickness Blister tape,
∅180-mm reel
Blister tape,
∅330-mm reel
** 62 ** 72
CROrdering code mm pcs./reel pcs./reel
3.3 nF B37949K5332J0** 0.8 ±0.1 4000 16000
4.7 nF B37949K5472J0** 0.8 ±0.1 4000 16000
6.8 nF B37949K5682J0** 0.8 ±0.1 4000 16000
10 nF B37949K5103J0** 1.2 ±0.1 3000 12000
Multilayer ceramic capacitors
C0G
Page 15 of 22Please read Cautions and warnings and
Important notes at the end of this document.
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Typical characteristics1)
Capacitance change ∆C/C25 versus
temperature T
Capacitance change ∆C/C0versus
superimposed DC voltage V
Impedance |Z| versus frequency f Dissipation factor tan δversus temperature T
Multilayer ceramic capacitors
C0G
Page 16 of 22Please read Cautions and warnings and
Important notes at the end of this document.
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Typical characteristics1)
Insulation resistance Rins versus
temperature T
Capacitance change ∆C/C1versus time t
Multilayer ceramic capacitors
C0G
Page 17 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
How to select ceramic capacitors
Remember the following when selecting ceramic capacitors:
1. Ceramic capacitors that must fulfill high quality requirements must be qualified based on
AEC-Q200 Rev-C.
2. When ceramic capacitors are used at the connection to a battery or power supply (e.g. clamp
15 or 30 in an automobile) or for safety-relevant applications, two single ceramic capacitors
should be connected in series. Alternatively a ceramic capacitor with integrated series circuits
should be used in order to reduce the possibility of a short circuit caused by a fracture. The
MLSC from EPCOS contains such a series circuit in a single component.
3. The use of multilayer varistors (MLVs) is recommended for ESD protection (see chapter
“Effects on mechanical, thermal and electrical stress”, section 1.4).
4. Additional stress factors such as continuous operating voltage or application-specific derating
must be taken into account in the selection of components (refer to chapter “Reliability”).
Recommendations for the circuit board design
1. Components with an optimized geometrical design are preferable where permitted by the
application.
2. Use at least FR4 circuit board material.
3. Geometrically optimized circuit boards are preferable, especially those that cannot be
deformed.
4. Ceramic capacitors should be placed with a sufficient minimum distance from the edge of a
circuit board. High bending forces may be exerted there when boards are separated and
during further processing of a board (e.g. when incorporating it in a housing).
5. Ceramic capacitors should always be placed parallel to the possible bending axis of a circuit
board.
6. Screw connections should not be used to fix a board or connect several boards. Components
should not be placed near screw holes. If screw connections are unavoidable, they should be
cushioned, for instance using rubber pads.
Multilayer ceramic capacitors
C0G
Page 18 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Recommendations for processing
1. Ensure correct positioning of a ceramic capacitor on the solder pad.
2. Be careful when using casting, injection-molded and molding compounds and cleaning
agents. They can damage a capacitor.
3. Support a circuit board and reduce placement forces.
4. Do not straighten a board (manually) if it is distorted by soldering.
5. Separate boards with a peripheral saw, or preferably with a milling head (no dicing or
breaking).
6. Be careful when subsequently placing heavy or leaded components (e.g. transformers or
snap-in components) because of the danger of bending and fracture.
7. When testing, transporting, packing or inserting a board, avoid any deformation of it so that
components are not damaged.
8. Avoid excessive force when plugging a connector into a device soldered onto a board.
9. Only mount ceramic capacitors using the soldering process (reflow or wave) that is
permissible for them (see chapter “Soldering directions”).
10. When soldering, select the softest solder profile possible (heating time, peak temperature,
cooling time) to avoid thermal stress and damage.
11. Ensure the correct solder meniscus height and solder quantity.
12. Ensure correct dosing of the cement.
13. Ceramic capacitors with external silver-palladium terminations are intended for conductive
adhesion - they are not suited for lead-free soldering processes.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Multilayer ceramic capacitors
C0G
Page 19 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Symbols and terms
Symbol English German
A Area Fläche
C Capacitance Kapazität
C0Initial (original) capacitance Anfangskapazität
C1Capacitance value after one hour's use Kapazitätswert nach einer Stunde
CRRated capacitance Nennkapazität
C20 Capacitance at 20 °C Kapazität bei 20 °C
C25 Capacitance at 25 °C Kapazität bei 25 °C
∆C Capacitance change Kapazitätsänderung
D Bending displacement Durchbiegung
EaActivation energy Aktivierungsenergie
ESR Equivalent series resistance Ersatzserienwiderstand
F Force Kraft
f Frequency Frequenz
fmeas Measuring frequency Messfrequenz
fres Self-resonant frequency Eigenresonanzfrequenz
Itest Test current Prüfstrom
k Ageing constant Alterungskonstante
L Inductance Induktivität
N Quantity (integer values) Anzahl (ganzzahliger Wert)
Ploss Power dissipation or loss Verlustleistung
Qel Electrical charge Elektrische Ladung
Q Quality Güte
Rins Insulation resistance Isolationswiderstand
RPParallel resistance Parallelwiderstand
RSSeries resistance (circuit resistance) Serienwiderstand
SVRate of rise of a voltage pulse Flankensteilheit eines Spannungsimpulses
T Temperature Temperatur
Tmeas Measuring temperature Messtemperatur
Top Operating temperature Betriebstemperatur
Tref Reference temperature Bezugstemperatur
Ttest Test temperature Prüftemperatur
t Time Zeit
trRise time of a voltage pulse Anstiegszeit eines Spannungsimpulses
ttest Test duration Prüfdauer
tan δDissipation factor Verlustfaktor
Multilayer ceramic capacitors
C0G
Page 20 of 22Please read Cautions and warnings and
Important notes at the end of this document.
Symbol English German
V Voltage Spannung
V0Initial (original) voltage (basic voltage
level)
Anfangsspannung
(Spannungsgrundpegel)
Vmeas Measuring voltage Messspannung
VRRated voltage Nennspannung
VSAmplitude of a voltage pulse Hub des Spannungsimpulses
VRMS Measuring (root-mean-square or
effective) AC voltage
Effektivspannung
Vtest Test voltage Prüfspannung
|Z| Magnitude of impedance (AC
resistance)
Betrag der Impedanz
(Wechselstromwiderstand)
αTemperature coefficient Temperaturkoeffizient
ε0Absolute dielectric constant Absolute Dielektrizitätskonstante
εrRelative dielectric constant Relative Dielektrizitätskonstante
λFailure rate Ausfallrate
τTime constant Zeitkonstante
Abbreviations / Notes
Symbol English German
Lead spacing (in mm) Rastermaß (in mm)
Surface-mounted devices Oberflächenmontierbares Bauelement
* To be replaced by a number in ordering
codes, type designations etc.
Platzhalter für Zahl im Bestellnummern-
code oder für die Typenbezeichnung.
+ To be replaced by a letter. Platzhalter für einen Buchstaben.
All dimensions are given in mm. Alle Maße sind in mm angegeben.
The commas used in numerical values
denote decimal points.
Verwendete Kommas in Zahlenwerten
bezeichnen Dezimalpunkte.
Multilayer ceramic capacitors
C0G
Page 21 of 22Please read Cautions and warnings and
Important notes at the end of this document.
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,
MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Important notes
Page 22 of 22
