D . C . P O W E R C O N T A C T O R S Type 586 Type 586 SPDT STANCOR PART Sec. NUMBER A B C Duty Cycle Terminal Pole Type* Form Bracket Style Coil Coil Resistance Volt. (Ohms) D.C. @25C Contact Material Contact Rating-(Amps.) Inductive Load Volt. Normally Open Normally Closed D.C. Continuous Inrush** Continuous Inrush** DIMENSIONS INCHES Case L W H Weight Agency (oz.) Certif. 586-901 Continuous 4 SPNO Standard 6 5.3 Silver Alloy 6 200 600 - - 3.69 3.30 2.90 24.0 586-902 Continuous 4 SPNO Standard 12 21.0 Silver Alloy 12 200 600 - - 3.69 3.30 2.90 24.0 - 586-903 Continuous 4 SPNO Standard 15 32.8 Silver Alloy 15 200 600 - - 3.69 3.30 2.90 24.0 - 586-905 Continuous 4 SPNO Standard 24 84.0 Silver Alloy 24 200 600 - - 3.69 3.30 2.90 24.0 - 586-906 Continuous 4 SPNO Standard 36 189.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 - 586-907 Continuous 4 SPNO Standard 48 336.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 - 586-911 Continuous 6 SPDT Standard 12 13.2 Silver Alloy 12 200 600 100 300 4.61 3.30 2.90 26.0 - 586-914 Continuous 6 SPDT Standard 24 53.0 Silver Alloy 24 200 600 100 200 4.61 3.30 2.90 26.0 - 586-915 Continuous 6 SPDT Standard 36 120.0 Silver Alloy 36 200 600 100 200 4.61 3.30 2.90 26.0 - For outline drawings refer to page 97. -- Water Resistant * Terminal Type: "4" = Isolated Coil "6" = Isolated Coil ** Inrush Current: Current applied within the first 1/2 second of contact closure Engineering Design Data D.C. Type 586 Coil Rating Nominal Magnetic Coil Rating (Watts) 8 - SPNO 12 - SPDT Operation in % of Nom. Coil Rating Pick-up Max. Safe Operate 75% 110% Temperature Range Breakdown Voltages All Terminals - 60 Hz RMS Open Contacts Opposite Same To Polarity Polarity Ground 500 500 500 Contact Material Power Pilot Silver Alloy - Electrical Life Oper. Oper. At Per Rated Load Min. 50,000 2 Mechanical Life Oper. At No Load Oper. Per Min Max. Oper. Amb. F 100,000 30 149 Type 586 Custom Design Capabilities -- -40F to 149F Terminations -- Contacts: 5/16"-24 UNF-2A thread -- Coil: #10-32 UNF-2A thread Recommended Mounting -- Vertical plane with coil terminals up. Hardware Torque Specification -- Contact Terminal: 60 inch-lbs., max. -- Coil Terminal: 12-18 inch lbs. -- Coil voltages 6 VDC through 48 VDC -- High vibration (consult factory) -- Gold plated contacts for pilot duty (low load switching) applications -- Please complete application data form on page 99 of this section. Note: Caution must be used in coil selection for use in 12 volt systems where battery charging may expose coil to continuous, higher-than-rated voltage. White-Rodgers will not be responsible for consequences of misapplied solenoids. Errata Sheet - replaces page 96 in printed Stancor Product Catalog R-3982 96 White-Rodgers * Emerson Electric Co. 9797 Reavis Road * St. Louis, MO 63123 (314) 865-8799 * Fax (314) 638-2400 www.stancor.com D . C . P O W E R C O N T A C T O R S Type 586 Te r m i n a l T y p e 4 - I s o l a t e d C o i l .281 WIDE X .600.281 LONG WIDE X SLOT .600 LONG SLOTNORMALLY OPEN W W 3.300 3.300 2.300 2.300 5/16-24 UNF-2A X .594 LO 5/16-24 UNF-2A X .594 LONG L 3.688 3.688 L #10-32 UNF-2A #10-32 U X .375 LONG H 2.891 2.797 H CIRCUIT DIAGRAM Te r m i n a l T y p e 6 - I s o l a t e d C o i l .281 WIDE X .600 LONG SLOT NORMALLY OPEN W 3.300 W 3.300 NORMALLY CLOSED 2.300 2.300 5/16-24 UNF5/16-24 UNF-2A X .594 LONG L 4.618 4.618 L #10-32 UNF-2A X .375 LONG #10-32 UNF-2A H 2.891 2.797 H CIRCUIT DIAGRAM White-Rodgers * Emerson Electric Co. 9797 Reavis Road * St. Louis, MO 63123 (314) 865-8799 * Fax (314) 638-2400 www.stancor.com 97