Only One Name Means ProTek’Tion™
The SLVU2.8-8G is an ultra low capacitance TVS array, designed to protect four line pairs from the eects of Electro-
stac Discharge (ESD), Electrical Fast Transients (EFT) and switching transients. The SLVU2.8-8G exceeds Level 4 IEC
61000-4-2, with a peak pulse power rang of 500 Was for an 8/20µs waveshape.
The ultra low capacitance and low leakage current of the device allows the designer to protect high speed data ap-
plicaons. Packaged in a SO-8 conguraon, the SLVU2.8-8G is both RoHS and REACH compliant.
• IEC Compability IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• IEC Compability IEC 61000-4-4 (EFT): 40A - 5/50ns
• IEC Compability IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-
Gnd) & Level 3 (Line-Line)
• 500 Was Peak Pulse Power per Line (tp = 8/20µs)
• Provides Protecon for Four Line Pairs
• Low Leakage Current < 1.0 µA
• Ultra Low Capacitance: 6.2pF Max
• RoHS Compliant
• REACH Compliant
• Molded JEDEC SO-8 Package
• Approximate Weight: 70 milligrams
• Lead-Free Pure-Tin Plang (Annealed)
• Solder Reow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 8mm Tape and Reel Per EIA Standard 481
• Flammability Rang UL 94V-0
• Ethernet - 10/100/1000 Base T
• Cellular Phones
• Audio/Video Inputs
• Handheld Electronics
• SMART Phones
12 4
8
3
5
6
7
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Was
Peak Pulse Current (tp = 8/20µs) IPP 30 Amps
Operang Temperature TL-55 to 150 °C
Storage Temperature TSTG -55 to 150 °C
SLVU2.8-8G 288G 2.8 3.0 2.8 5.5 8.5 15 17 1.0 6.2
1. Device is measured between pin 1 to 2, pin 3 to 4, pin 5 to 6 and pin 7 to 8.
Only One Name Means ProTek’Tion™
500W, 8/20µs Waveform
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
tf
e-t
Peak Value IPP
td = t/(IPP/2)
Only One Name Means ProTek’Tion™
Peak Pulse Power
8/20µs
Average Power
Only One Name Means ProTek’Tion™
The SLVU2.8-8G provides 4 lines of protecon in a common mode conguraon. Circuit connecvity is as follows:
• Line 1 connected to Pin 1
• Line 2 connected to Pin 8
• Line 3 connected to Pin 5
• Line 4 connected to Pin 4
• Pins 2, 3, 6, 7 are connected to ground
Circuit board layout is crical for electromagnec compability protecon. The following guidelines are recommended:
• The protecon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasic inductance.
• Ground planes should be used whenever possible. For mullayer PCBs, use ground vias.
1
2
4
8
3
5
6
7
Line 1
Line 2
Line 3
Line 4
1
2
4
8
3
5
6
7
Line Pair 1
Line Pair 2
Line Pair 3
Line Pair 4
The SLVU2.8-8G provides four line pairs in a dierenal mode conguraon. Circuit connecvity is as follows:
• Line Pair 1 connected to Pins 1 & 2
• Line Pair 2 connected to Pins 3 & 4
• Line Pair 3 connected to Pins 5 & 6
• Line Pair 4 connected to Pins 7 & 8
Only One Name Means ProTek’Tion™
A 4.80 5.00 0.189 0.196
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
D 0.35 0.49 0.014 0.019
F 0.40 1.25 0.016 0.049
G 1.27 BSC 0.05 BSC
J 0.18 0.25 0.007 0.009
K 0.10 0.25 0.004 0.008
P 5.80 6.20 0.229 0.244
R 0.25 0.50 0.010 0.019
1. -T- = Seang plane and datum surface.
2. Dimensions “A” and “B” are datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold ash and metal burrs.
A 1.14 1.40 0.045 0.055
B 0.64 0.89 0.025 0.035
C 6.22 - 0.245 -
D 3.94 4.17 0.155 0.165
E 1.02 1.27 0.040 0.050
1. Controlling dimension: inches.
-A-
8 5
14
-B- P
GD
-T-
C
K J
R x 45°
0° - 10°
F
4 PL
0.010” (0.25mm) MB
+
8 PL
0.010” (0.25mm) B
+AT
A
B
CD
E
M
MSS
Only One Name Means ProTek’Tion™
SLVU2.8-8G n/a -T7 1,000 7” 98
SLVU2.8-8G n/a -T13 2,500 13” 98
This device is only available in a Lead-Free conguraon.
178mm (7”) 12mm 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Sux - T7 = 7” Reel - 1,000 pieces per 12mm tape.
4. Sux - T13 = 13” Reel - 2,500 pieces per 12mm tape.
5. Bulk product shipped in tubes of 98 pieces per tube.
6. Marking on Part - marking code (see page 2), date code, logo and pin one dened by dot on top of package.
Package outline, pad layout and tape specicaons per document number 06009.R3 9/10.
User Direcon of Feed
t
K0
A0 P
D
P0
P2 E
B0
F
W
10 Pitches Cumulave
Tolerance on tape ± 0.2
Only One Name Means ProTek’Tion™
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specically for
the protecon of electronic systems from the eects of lightning, Electrostac Discharge (ESD), Nuclear Electromagnec Pulse (NEMP), in-
ducve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaon specic protecon soluons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
www.protekdevices.com
www.protekanalog.com
