05329 SLVU2.8-8G Only One Name Means ProTek'TionTM 500 WATT ULTRA low capacitancE TVS array Description The SLVU2.8-8G is an ultra low capacitance TVS array, designed to protect four line pairs from the effects of Electrostatic Discharge (ESD), Electrical Fast Transients (EFT) and switching transients. The SLVU2.8-8G exceeds Level 4 IEC 61000-4-2, with a peak pulse power rating of 500 Watts for an 8/20s waveshape. The ultra low capacitance and low leakage current of the device allows the designer to protect high speed data applications. Packaged in a SO-8 configuration, the SLVU2.8-8G is both RoHS and REACH compliant. SO-8 package Features applications * IEC Compatibility IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV * IEC Compatibility IEC 61000-4-4 (EFT): 40A - 5/50ns * IEC Compatibility IEC 61000-4-5 (Surge): 24A, 8/20s - Level 2(LineGnd) & Level 3 (Line-Line) * 500 Watts Peak Pulse Power per Line (tp = 8/20s) * Provides Protection for Four Line Pairs * Low Leakage Current < 1.0 A * Ultra Low Capacitance: 6.2pF Max * RoHS Compliant * REACH Compliant * * * * * Ethernet - 10/100/1000 Base T Cellular Phones Audio/Video Inputs Handheld Electronics SMART Phones Mechanical characteristics * Molded JEDEC SO-8 Package * Approximate Weight: 70 milligrams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 8mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATION 05329.R0 1/12 8 7 6 5 1 2 3 4 Page 1 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20s) - See Figure 1 PPP 500 Watts Peak Pulse Current (tp = 8/20s) IPP 30 Amps Operating Temperature TL -55 to 150 C TSTG -55 to 150 C Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART DEVICE RATED MINIMUM MAXIMUM NUMBER MARKING STAND-OFF BREAKDOWN snapback VOLTAGE VOLTAGE VOLTAGE (Note 1) (Note 1) (Note 1) SLVU2.8-8G 288G VWM VOLTS @ 1mA V(BR) VOLTS @ ISB = 50mA VSB VOLTS 2.8 3.0 2.8 MAXIMUM CLAMPING VOLTAGE (Note 1) (Fig. 2) MAXIMUM LEAKAGE CURRENT (Note 1) maximum CAPACITANCE (Note 1) @I PP = 2A @I PP = 5A @I PP = 24A @I PP = 30A VC VC VC VC VOLTS VOLTS VOLTS VOLTS @ v wm ID A 0V, 1MHz C pF 1.0 6.2 5.5 8.5 15 17 notes 1. Device is measured between pin 1 to 2, pin 3 to 4, pin 5 to 6 and pin 7 to 8. 05329.R0 1/12 Page 2 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20s Waveform 100 10 0.1 1 10 100 td - Pulse Duration - s IPP - Peak Pulse Current - % of IPP 10,000 figure 2 pulse wave form 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05329.R0 1/12 1,000 0 5 10 15 t - Time - s Page 3 20 25 30 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM typical device characteristics 100 figure 3 power derating curve Peak Pulse Power 8/20s % Of Rated Power 80 60 40 20 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - C 150 figure 4 typical clamping voltage vs peak pulse current 20 VC - Clamping Voltage - V 16 12 8 4 0 0 05329.R0 1/12 5 10 15 20 IPP - Peak Pulse Current - Amps Page 4 25 30 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM application information Line 1 Line 2 1 8 2 7 3 6 4 5 Line 3 Line 4 figure 1 - bidirectional common-mode protection The SLVU2.8-8G provides 4 lines of protection in a common mode configuration. Circuit connectivity is as follows: * Line 1 connected to Pin 1 * Line 2 connected to Pin 8 * Line 3 connected to Pin 5 * Line 4 connected to Pin 4 * Pins 2, 3, 6, 7 are connected to ground 8 1 Line Pair 1 Line Pair 3 2 7 3 6 Line Pair 2 Line Pair 4 5 4 figure 2 - bidirectional differential-mode protection The SLVU2.8-8G provides four line pairs in a differential mode configuration. Circuit connectivity is as follows: * Line Pair 1 connected to Pins 1 & 2 * Line Pair 2 connected to Pins 3 & 4 * Line Pair 3 connected to Pins 5 & 6 * Line Pair 4 connected to Pins 7 & 8 circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: * The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. * The path length between the TVS device and the protected line should be minimized. * All conductive loops including power and ground loops should be minimized. * The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. * Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05329.R0 1/12 Page 5 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM SO-8 package information outline dimensions dim millimeters -A- inches min max min max A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45 C 0.05 BSC J + 0.010" (0.25mm) M B M 4 PL P 0 - 10 -T- K + 0.010" (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions "A" and "B" are datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters B inches min max min max A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05329.R0 1/12 D C E Page 6 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape 0.2 P2 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13" Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06009.R3 9/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty SLVU2.8-8G n/a -T7 1,000 7" 98 SLVU2.8-8G n/a -T13 2,500 13" 98 This device is only available in a Lead-Free configuration. 05329.R0 1/12 Page 7 www.protekdevices.com 05329 SLVU2.8-8G Only One Name Means ProTek'TionTM company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT (c) ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05329.R0 1/12 Page 8 www.protekdevices.com