MIL-DTL-38999 Series II Type Connectors with PCB contacts JT07R jam nut receptacle S C (2 PLACES) M .094 H + .011 - .010 .062 MIN. .109 MAX. PANEL THICKNESS Z PCB TAIL STICKOUT N .062 .001 DIA. FOR SIZE 16 CONTACTS .019 .001 DIA. FOR SIZES 20 & 22D CONTACTS V THREAD L T* RR THREAD HOW TO ORDER * Order by applicable 88/91 part number in table below. 88 prefix designates olive drab cadmium plated connector shell. 91 prefix designates electroless nickel plated connector shell. * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use. Example part number: 88-569751-35P designates shell size 8 with a 8-35 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. * .059 dia. min. 3 lockwire holes. Formed lockwire hole design (6 holes) is optional. "D" shaped mounting hole dimensions Z Shell Size Part Number A* +.000 -.010 C Max. H Hex +.017 -.016 L Max. M .005 N +.001 -.005 S .016 T* +.010 -.000 V Thread Class 2A (Plated) RR Thread Class 2A (Plated) Size 16 & 20 Contacts Size 22D Contacts 8 88/91-569751-XXX .830 1.390 1.062 .453 .438 .473 1.250 .884 .4375-28 UNEF .8750-20 UNEF .272 - .200 .283 - .178 10 752-XXX .955 1.515 1.188 .453 .438 .590 1.375 1.007 .5625-24 UNEF 1.0000-20 UNEF .272 - .200 .283 - .178 12 753-XXX 1.084 1.640 1.312 .453 .438 .750 1.500 1.134 .6875-24 UNEF 1.1250-18 UNEF .272 - .200 .283 - .178 14 754-XXX 1.208 1.765 1.438 .453 .438 .875 1.625 1.259 .8125-20 UNEF 1.2500-18 UNEF .272 - .200 .283 - .178 16 755-XXX 1.333 1.953 1.562 .453 .438 1.000 1.781 1.384 .9375-20 UNEF 1.3750-18 UNEF .272 - .200 .283 - .178 18 756-XXX 1.459 2.031 1.688 .453 .438 1.125 1.890 1.507 1.0625-18 UNEF 1.5000-18 UNEF .272 - .200 .283 - .178 20 757-XXX 1.576 2.156 1.812 .422 .464 1.250 2.016 1.634 1.1875-18 UNEF 1.6250-18 UNEF .272 - .200 .283 - .178 22 758-XXX 1.701 2.280 2.000 .422 .464 1.375 2.140 1.759 1.3125-18 UNEF 1.7500-18 UNS .272 - .200 .283 - .178 24 759-XXX 1.826 2.405 2.125 .422 .464 1.500 2.265 1.884 1.4375-18 UNEF 1.8750-16 UN .272 - .200 .283 - .178 All dimensions for reference only. 34