BCcomponents DATA SHEET MKP 416 to 420 Metallized polypropylene filter capacitors Product specification Supersedes data of 2001 Sep 13 File under BCcomponents, BC05 2002 Oct 09 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 MKP RADIAL POTTED TYPE PITCH 5/10/15 mm 296x12(full_width P = 5 mm P = 10 and 15 mm CBB344 Fig.1 Simplified outlines. FEATURES QUICK REFERENCE DATA * 5, 10 and 15 mm lead pitch DESCRIPTION VALUE * Supplied loose in box, in ammopack and taped on reel Capacitance range (E24 series) 0.001 to 1.2 F * Intermediate values are available of the E96 series. Capacitance tolerance 5%; 2% Rated (DC) voltage 63 V; 160 V; 250 V; 400 V; 630 V Rated (AC) voltage 25 V; 63 V;100 V; 125 V; 160 V APPLICATIONS * Low losses due to low contact resistance and low loss dielectric result in applications where high frequency occur or high stability is preferred * Their small dimensions make them suitable for circuits with high packaging density. Rated peak-to-peak voltage 70 V; 180 V; 280 V; 350 V; 450 V Climatic category 55/085/56 Rated temperature (DC) 85 C Rated temperature (AC) 85 C Maximum application temperature 85 C Reference specification IEC 60384-16 Performance grade grade 1 (long life) Stability grade grade 1 Materials qualified in accordance with UL94 V-0 DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-16/101". 2002 Oct 09 2 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 COMPOSITION OF CATALOGUE NUMBER 416 TYPE AND PITCHES 5.0/10.0/15.0 mm MULTIPLIER (nF) 417 5.0/10.0/15.0 mm 0.01 2 0.1 3 1 4 CAPACITANCE (numerically) Example: 1004 = 100 x 1 = 100 nF 2222 TYPE 416 417 PACKAGING 4.. X lead length 3.5 mm Taped Loose in box X PREFERRED TYPES LEAD CONFIGURATION Taped Loose in box XXX lead length 3.5 mm C-TOL 63 V 2% 1 2% 7 160 V 2% 1 2% 7 ON REQUEST Taped 416 Loose in box lead length 4.0 mm lead length 3.5 mm Taped 417 Loose in box lead length 4.0 mm lead length 3.5 mm 2002 Oct 09 3 5% 0 5% 3 2% 4 5% 6 5% 0 5% 3 2% 4 5% 6 BCcomponents Product specification Metallized polypropylene filter capacitors 418 TYPE AND PITCHES 5.0/10.0/15.0 mm MULTIPLIER (nF) 419 5.0/10.0/15.0 mm 0.01 2 5.0/10.0/15.0 mm 0.1 3 1 4 420 CAPACITANCE (numerically) Example: 1004 = 100 x 1 = 100 nF 2222 TYPE 418 419 420 PACKAGING 4.. X lead length 3.5 mm Taped Loose in box lead length 3.5 mm C-TOL 250 V 2% 1 2% 7 400 V 2% 1 2% 7 2% Taped Loose in box X PREFERRED TYPES LEAD CONFIGURATION Taped Loose in box XXX 1 2% lead length 3.5 mm 630 V 7 ON REQUEST Taped 418 Loose in box lead length 4.0 mm lead length 3.5 mm Taped 419 Loose in box lead length 4.0 mm lead length 3.5 mm Taped 420 Loose in box lead length 4.0 mm lead length 3.5 mm 2002 Oct 09 4 5% 0 5% 3 2% 4 5% 6 5% 0 5% 3 2% 4 5% 6 5% 0 5% 3 2% 4 5% 6 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 MKP 416 GENERAL DATA PITCH 5/10 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.27 F at 10 kHz at 100 kHz 5 x 10-4 25 x 10-4 10 x 10-4 30 x 10-4 10 x 10-4 35 x 10-4 Rated voltage pulse slope (dU/dt)R at 63 V (DC): P = 5 mm 50 V/s P = 10 mm 20 V/s >100000 M R between leads at 50 V; 1 minute >100000 M R between interconnected leads and case at 50 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 100 V; 1 minute 2840 V; 1 minute Available 63 V DC versions PACKAGING Ammopack Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm 5 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 416 0.... on request 2% 2222 416 1.... preferred 5% 2222 416 3.... on request 2% 2222 416 4.... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 URdc = 63 V; URac = 25 V; Up-p = 70 V CATALOGUE NUMBER 2222 416 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) AMMOPACK LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 1000 2000 750 1500 600 1000 500 750 Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.036 0.039 0.043 13603 4.5 x 9.0 x 7.2 0.45 13903 14303 0.047 14703 0.051 15103 0.056 15603 0.062 16203 0.068 16803 0.075 0.082 6.0 x 11.0 x 7.2 0.60 17503 18203 0.091 19103 0.1 11004 0.11 11104 0.12 11204 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.13 0.15 5.0 x 11.0 x 12.5 0.85 11304 11504 0.16 11604 0.18 11804 0.20 0.22 6.0 x 12.0 x 12.5 1.10 12004 12204 0.24 12404 0.27 12704 2002 Oct 09 6 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 MKP 416 GENERAL DATA PITCH 15 mm l b 296x12(full_width) h lt Odt P CBA237 Fig.5 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.75 F 0.75 F < C 1.1 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) at 10 kHz at 100 kHz 10 x 10-4 40 x 10-4 10 x 10-4 45 x 10-4 10 x 10-4 50 x 10-4 10 x 10-4 60 x 10-4 50 V/s R between leads, for C 0.33 F at 50 V; 1 minute >100000 M RC between leads, for C > 0.33 F at 50 V; 1 minute >30000 s >100000 M R between interconnected leads and case at 50 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 100 V; 1 minute 2840 V; 1 minute Available 63 V DC versions PACKAGING Taped on reel Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 0.3 mm 7 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING on request 5% 2222 416 0.... 2% 2222 416 1.... preferred 5% 2222 416 6.... on request 2% 2222 416 7.... preferred BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 URdc = 63 V; URac = 25 V; Up-p = 70 V CATALOGUE NUMBER 2222 416 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 3.5 0.3 mm C-tol = 2% C-tol = 2% last 5 digits of catalogue number last 5 digits of catalogue number SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.3 0.33 0.36 13004 6.0 x 12.0 x 17.5 1.4 13304 13604 73004 900 73304 73604 0.39 13904 73904 0.43 14304 74304 0.47 0.51 7.0 x 13.5 x 17.5 1.9 14704 15104 800 74704 75104 0.56 15604 75604 0.62 16204 76204 0.68 0.75 8.5 x 15.0 x 17.5 2.6 16804 17504 650 76804 77504 0.82 18204 78204 0.91 19104 79104 1.0 1.1 2002 Oct 09 10.0 x 16.5 x 17.5 3.1 11005 11105 8 600 71005 71105 1000 750 750 500 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 MKP 417 GENERAL DATA PITCH 5/10 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.6 Outline. Specific reference data for the 160 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.24 F at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 5 x 10-4 20 x 10-4 5 x 10-4 25 x 10-4 10 x 10-4 30 x 10-4 10 x 10-4 35 x 10-4 Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 5 mm 50 V/s P = 10 mm 20 V/s R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 260 V; 1 minute 2840 V; 1 minute Available 160 V DC versions PACKAGING Ammopack Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm 9 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 417 0.... on request 2% 2222 417 1.... preferred 5% 2222 417 3.... on request 2% 2222 417 4.... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 URdc = 160 V; URac = 63 V; Up-p = 180 V CATALOGUE NUMBER 2222 417 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 1000 2000 750 1500 750 1000 600 1000 500 750 Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.024 0.027 0.03 12403 4.5 x 9.0 x 7.2 0.45 12703 13003 0.033 13303 0.036 13603 0.039 13903 0.043 14303 0.047 0.051 6.0 x 11.0 x 7.2 0.60 14703 15103 0.056 15603 0.062 16203 0.068 16803 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.075 0.082 0.091 17503 4.0 x 10.0 x 12.5 0.60 18203 19103 0.1 11004 0.11 11104 0.12 0.13 5.0 x 11.0 x 12.5 0.85 11204 11304 0.15 11504 0.16 11604 0.18 0.20 11804 6.0 x 12.0 x 12.5 1.10 12004 0.22 12204 0.24 12404 2002 Oct 09 10 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 MKP 417 GENERAL DATA PITCH 15 mm l b 296x12(full_width) h lt Odt P CBA237 Fig.7 Outline. Specific reference data for the 160 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.27 F < C 0.39 F 10 x 10-4 40 x 10-4 0.39 F < C 0.56 F 10 x 10-4 45 x 10-4 10 x 10-4 50 x 10-4 10 x 10-4 60 x 10-4 0.56 F < C 0.75 F 0.75 F < C 1.1 F Rated voltage pulse slope (dU/dt)R at 160 V (DC) 50 V/s R between leads, for C 0.33 F at 100 V; 1 minute >100000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >30000 s >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 260 V; 1 minute 2840 V; 1 minute Available 160 V DC versions PACKAGING Taped on reel Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 0.3 mm 11 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING on request 5% 2222 417 0.... 2% 2222 417 1.... preferred 5% 2222 417 6.... on request 2% 2222 417 7.... preferred BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 URdc = 160 V; URac = 63 V; Up-p = 180 V CATALOGUE NUMBER 2222 417 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 3.5 0.3 mm C-tol = 2% C-tol = 2% last 5 digits of catalogue number SPQ last 5 digits of catalogue number SPQ 12704 1100 72704 1250 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.27 5.0 x 11.0 x 17.5 1.2 0.3 13004 0.33 13304 0.36 6.0 x 12.0 x 17.5 1.4 13604 73004 900 73304 73604 0.39 13904 73904 0.43 14304 74304 0.47 0.51 7.0 x 13.5 x 17.5 1.9 14704 15104 800 74704 75104 0.56 15604 75604 0.62 16204 76204 0.68 16804 0.75 8.5 x 15.0 x 17.5 2.6 17504 650 76804 77504 0.82 18204 78204 0.91 19105 79105 1.0 1.1 2002 Oct 09 10.0 x 16.5 x 17.5 3.1 11005 11105 12 600 71005 71105 1000 750 750 500 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 MKP 418 GENERAL DATA PITCH 5/10 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.8 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.13 F at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 5 x 10-4 20 x 10-4 5 x 10-4 25 x 10-4 10 x 10-4 30 x 10-4 Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 5 mm 50 V/s P = 10 mm 20 V/s >100000 M R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions PACKAGING Ammopack Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm 13 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 418 0..... on request 2% 2222 418 1..... preferred 5% 2222 418 3..... on request 2% 2222 418 4..... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 URdc = 250 V; URac = 100 V; Up-p = 280 V CATALOGUE NUMBER 2222 418 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 1500 3000 1000 2000 750 1500 750 1000 600 1000 500 750 Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.01 11003 0.011 0.012 11103 3.5 x 8.0 x 7.2 0.35 0.013 11203 11303 0.015 11503 0.016 11603 11803 0.018 0.02 4.5 x 9.0 x 7.2 0.45 12003 0.022 12203 0.024 12403 0.027 12703 0.03 13003 0.033 0.036 6.0 x 11.0 x 7.2 0.60 13303 13603 0.039 13903 0.043 14303 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.047 14703 0.051 15103 0.056 4.0 x 10.0 x 12.5 0.60 0.062 15603 16203 0.068 16803 0.075 17503 0.082 5.0 x 11.0 x 12.5 0.85 18203 0.091 19103 0.1 11004 0.11 0.12 6.0 x 12.0 x 12.5 1.10 11104 11204 0.13 11304 2002 Oct 09 14 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 MKP 418 GENERAL DATA PITCH 15 mm l b 296x12(full_width) h lt Odt P CBA237 Fig.9 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.15 F < C 0.3 F 10 x 10-4 35 x 10-4 0.3 F < C 0.39 F 10 x 10-4 40 x 10-4 10 x 10-4 45 x 10-4 10 x 10-4 50 x 10-4 0.39 F < C 0.56 F 0.56 F < C 0.68 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) 50 V/s R between leads, for C 0.33 F at 100 V; 1 minute >100000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >30000 s >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions PACKAGING Taped on reel Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 0.3 mm 15 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING on request 5% 2222 418 0..... 2% 2222 418 1..... preferred 5% 2222 418 6..... on request 2% 2222 418 7..... preferred BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 URdc = 250 V; URac = 100 V; Up-p = 280 V CATALOGUE NUMBER 2222 418 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 3.5 0.3 mm C-tol = 2% C-tol = 2% last 5 digits of catalogue number last 5 digits of catalogue number SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.15 0.16 5.0 x 11.0 x 17.5 1.2 11504 11604 1100 71504 71604 0.18 11804 71804 0.2 12004 72004 0.22 6.0 x 12.0 x 17.5 1.4 12204 900 72204 0.24 12404 72404 0.27 12704 72704 0.3 13004 0.33 7.0 x 13.5 x 17.5 1.9 13304 800 73004 73304 0.36 13604 73604 0.39 13904 73904 0.43 14304 0.47 8.5 x 15.0 x 17.5 2.6 14704 0.51 15104 0.56 15604 0.62 0.68 2002 Oct 09 10.0 x 16.5 x 17.5 3.1 16204 16804 16 650 74304 74704 1250 1000 750 750 75104 75604 600 76204 76804 500 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 MKP 419 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.10 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.0091 F 0.0091 F < C 0.02 F at 10 kHz at 100 kHz 5 x 10-4 10 x 10-4 10-4 15 x 10-4 5 x Rated voltage pulse slope (dU/dt)R at 400 V (DC) 50 V/s >100000 M R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING DIMENSIONS Ammopack H = 18.5 mm; P0 = 12.7 mm Loose in box lt = 4.0 +1.0/-0.5 mm 2002 Oct 09 17 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 419 0..... on request 2% 2222 419 1..... preferred 5% 2222 419 3..... on request 2% 2222 419 4..... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 URdc = 400 V; URac = 125 V; Up-p = 350 V CATALOGUE NUMBER 2222 419 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 1500 3000 1000 2000 750 1500 Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.001 11002 0.0011 11102 0.0012 11202 0.0013 11302 0.0015 11502 0.0016 11602 11802 0.0018 0.002 3.5 x 8.0 x 7.2 0.35 12002 0.0022 12202 0.0024 12402 0.0027 12702 0.003 13002 0.0033 13302 0.0036 13602 0.0039 13902 0.0043 14302 0.0047 14702 0.0051 15102 0.0056 15602 0.0062 16202 0.0068 0.0075 4.5 x 9.0 x 7.2 0.45 16802 17502 0.0082 18202 0.0091 19102 0.01 11003 0.011 11103 0.012 11203 0.013 11303 0.015 0.016 11503 6.0 x 11.0 x 7.2 0.60 11603 0.018 11803 0.02 12003 2002 Oct 09 18 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 MKP 419 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.11 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.027 F 0.027 F < C 0.068 F at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 10-4 20 x 10-4 5 x Rated voltage pulse slope (dU/dt)R at 400 V (DC) 20 V/s >100000 M R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING DIMENSIONS Ammopack H = 18.5 mm; P0 = 12.7 mm Loose in box lt = 4.0 +1.0/-0.5 mm 2002 Oct 09 19 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 419 0..... on request 2% 2222 419 1..... preferred 5% 2222 419 3..... on request 2% 2222 419 4..... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 URdc = 400 V; URac = 125 V; Up-p = 350 V CATALOGUE NUMBER 2222 419 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 750 1000 600 1000 500 750 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.022 12203 0.024 0.027 12403 4.0 x 10.0 x 12.5 0.60 12703 0.03 13003 0.033 13303 0.036 0.039 13603 5.0 x 11.0 x 12.5 0.85 13903 0.043 14303 0.047 14703 0.051 0.056 15103 6.0 x 12.0 x 12.5 1.10 15603 0.062 16203 0.068 16803 2002 Oct 09 20 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 MKP 419 GENERAL DATA PITCH 15 mm l b 296x12(full_width) h lt Odt P CBA237 Fig.12 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.075 F < C 0.11 F 0.11 F < C 0.22 F 0.22 F < C 0.36 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) at 10 kHz at 100 kHz 5 x 10-4 25 x 10-4 10 x 10-4 30 x 10-4 10 x 10-4 35 x 10-4 50 V/s R between leads, for C 0.33 F at 100 V; 1 minute >100000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >30000 s >100000 M R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING Taped on reel Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 0.3 mm 21 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING on request 5% 2222 419 0..... 2% 2222 419 1..... preferred 5% 2222 419 6..... on request 2% 2222 419 7..... preferred BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 URdc = 400 V; URac = 125 V; Up-p = 350 V CATALOGUE NUMBER 2222 419 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 3.5 0.3 mm C-tol = 2% C-tol = 2% last 5 digits of catalogue number last 5 digits of catalogue number SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.075 0.082 5.0 x 11.0 x 17.5 1.2 17503 18203 0.091 19103 0.1 11004 0.11 6.0 x 12.0 x 17.5 1.4 11104 1100 77503 78203 79103 71004 900 71104 0.12 11204 71204 0.13 11304 71304 0.15 11504 0.16 7.0 x 13.5 x 17.5 1.9 11604 71604 11804 71804 0.2 12004 72004 0.24 8.5 x 15.0 x 17.5 2.6 12204 12404 650 72204 72404 0.27 12704 72704 0.3 13004 73004 0.33 0.36 2002 Oct 09 10.0 x 16.5 x 17.5 3.1 13304 13604 22 1000 71504 800 0.18 0.22 1250 600 73304 73604 750 750 500 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 MKP 420 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.13 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.0068 F Rated voltage pulse slope (dU/dt)R at 630 V (DC) at 10 kHz at 100 kHz 5 x 10-4 10 x 10-4 50 V/s >100000 M R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING Ammopack Loose in box 2002 Oct 09 DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm 23 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 420 0..... on request 2% 2222 420 1..... preferred 5% 2222 420 3..... on request 2% 2222 420 4..... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 URdc = 630 V; URac = 160 V; Up-p = 450 V CATALOGUE NUMBER 2222 420 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 1500 3000 1000 2000 750 1500 Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.0015 11502 0.0016 11602 11802 0.0018 0.002 3.5 x 8.0 x 7.2 0.35 12002 0.0022 12202 0.0024 12402 0.0027 12702 0.003 13002 0.0033 0.0036 4.5 x 9.0 x 7.2 0.45 13302 13602 0.0039 13902 0.0043 14302 0.0047 14702 0.0051 0.0056 6.0 x 11.0 x 7.2 0.60 15102 15602 0.0062 16202 0.0068 16802 2002 Oct 09 24 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 MKP 420 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.14 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.027 F 0.027 F < C 0.047 F at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 10-4 20 x 10-4 5 x Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/s >100000 M R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute Available 630 V DC versions PACKAGING DIMENSIONS Ammopack H = 18.5 mm; P0 = 12.7 mm Loose in box lt = 4.0 +1.0/-0.5 mm 2002 Oct 09 25 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 420 0..... on request 2% 2222 420 1..... preferred 5% 2222 420 3..... on request 2% 2222 420 4..... on request BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 URdc = 630 V; URac = 160 V; Up-p = 450 V CATALOGUE NUMBER 2222 420 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/- -0.5 mm C-tol = 2% last 5 digits of catalogue number SPQ SPQ 750 1000 600 1000 500 750 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 2222 420 11003 0.011 2222 420 11103 0.012 2222 420 11203 0.013 4.0 x 10.0 x 12.5 0.60 2222 420 11303 2222 420 11503 0.015 0.016 2222 420 11603 0.018 2222 420 11803 0.02 0.022 5.0 x 11.0 x 12.5 0.85 2222 420 12003 2222 420 12203 0.024 2222 420 12403 0.027 2222 420 12703 0.03 2222 420 13003 0.033 2222 420 13303 0.036 0.039 6.0 x 12.0 x 12.5 1.10 2222 420 13603 2222 420 13903 0.043 2222 420 14303 0.047 2222 420 14703 2002 Oct 09 26 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 MKP 420 GENERAL DATA PITCH 15 mm l b 296x12(full_width) h lt Odt P CBA237 Fig.15 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.051 F < C 0.11 F 0.11 F < C 0.16 F at 10 kHz at 100 kHz 5 x 10-4 25 x 10-4 10-4 35 x 10-4 10 x Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/s >100000 M R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING DIMENSIONS Tapedon reel H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm Loose in box lt = 3.5 0.3 mm 2002 Oct 09 27 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 420 0..... on request 2% 2222 420 1..... preferred 5% 2222 420 6..... on request 2% 2222 420 7..... preferred BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 URdc = 630 V; URac = 160 V; Up-p = 450 V CATALOGUE NUMBER 2222 420 ..... AND PACKAGING C (E 24) ( F) DIMENSIONS bxhxl (mm) MASS (g) REEL LOOSE IN BOX H = 18.5 mm; P0 = 12.7 mm lt = 3.5 0.3 mm C-tol = 2% C-tol = 2% last 5 digits of catalogue number last 5 digits of catalogue number SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.051 0.056 6.0 x 12.0 x 17.5 1.4 15103 15603 0.062 16203 0.068 16803 0.075 7.0 x 13.5 x 17.5 1.9 17503 900 75103 75603 76203 800 76803 77503 0.082 18203 78203 0.091 19103 79103 0.1 0.11 8.5 x 15.0 x 17.5 2.6 11004 11104 650 71004 71104 0.12 11204 71204 0.13 11304 71304 0.15 0.16 2002 Oct 09 10.0 x 16.5 x 17.5 3.1 11504 11604 28 1000 600 71504 71604 750 750 500 BCcomponents Product specification Metallized polypropylene filter capacitors CONSTRUCTION MKP 416 to 420 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK Description * Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. * Radial leads, solder-coated The capacitors shall be mechanically fixed by the leads. - Copper clad steel wire for pitch = 2e, 4e and 6e (case size 1750 and 1760) SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.17: - Copper wire pitch = 6e (case size 1770, 1785 and 1710) * Eccentricity as in Fig.17. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Solder-plated copper-clad steel wire to ensure good resistance to soldering heat * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. * Product height with seating plane as given by "IEC 60717" as reference: hmax h + 0.3 mm. MKP metallised polypropylene film 144x12(halfpage) 144x12(halfpage) bmax = b + 0.3 mm eccentricity lmax = l + 0.3 mm CBA116 Fig.17 Lay-out. metal spray layer Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. connecting wire CBA333 RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Fig.16 Construction. Unless otherwise specified, all electrical values apply at an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. Mounting NORMAL USE The capacitors are designed for printed-circuit board applications. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to this handbook, chapter "Packaging information". 2002 Oct 09 For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 29 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CHARACTERISTICS Capacitance CBA901 2 296x12(full_width) C/C (%) 0 max. typical -2 min. 0 -40 40 Tamb (C) 80 Fig.18 Capacitance change at 1 kHz as a function of temperature. Impedance CBB021 296x12(full_width) 10 2 impedance () 10 1 10 0 10 -1 10 nF 100 nF 10 -2 1.0 F 10 -3 10 4 10 5 10 6 10 7 Fig.19 Impedance as a function of frequency; typical curves. 2002 Oct 09 30 f (Hz) 10 8 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Maximum RMS voltage (sinewave) as a function of frequency CBA593 296x12(full_width) 10 2 AC voltage (V) 10 1 4 10 7 n 0 F nF 0 nF 22 10 00 10 0 10 3 10 4 nF 10 5 10 6 f (Hz) 10 7 Fig.20 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V. CBA594 296x12(full_width) 10 2 AC voltage (V) 10 1 47 24 nF 0 10 nF nF 0 22 nF 10 00 10 0 10 3 10 4 10 5 nF 10 6 f (Hz) Fig.21 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 160 V. 2002 Oct 09 31 10 7 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CBA595 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 22 nF 47 nF 100 nF 470 nF 10 0 3 10 10 4 10 5 10 6 f (Hz) 10 7 Fig.22 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA596 296x12(full_width) 10 3 AC voltage (V) 10 2 2.2 nF 4.7 nF 10 1 10 nF 22 nF 47 nF 330 nF 10 0 10 3 10 4 10 5 10 6 f (Hz) Fig.23 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. 2002 Oct 09 32 10 7 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CBA597 296x12(full_width) 10 3 AC voltage (V) 10 2 10 nF 10 1 22 nF 47 nF 100 nF 10 0 3 10 10 4 10 5 10 6 f (Hz) Fig.24 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 20 to 24. 2002 Oct 09 33 10 7 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Tangent of loss angle CBA506 296x12(full_width) 10 2 dissipation factor (x10 -4) 10 1 10 0 10 3 10 4 10 5 f (Hz) 10 6 Fig.25 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance CBA204 296x12(full_width) 10 6 RC (s) 10 5 10 4 0 20 40 60 80 Fig.26 RC product as a function of ambient temperature; typical curve. 2002 Oct 09 34 Tamb(C) 100 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Maximum allowed component temperature rise (DT) as a function of the ambient temperature (Tamb) CBA850 12 296x12(full_width) T (C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.27 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/xC Table 1 Heat conductivity bmax (mm) 3.5 PITCH (mm) 5 10 15 3.0 - - - 4.0 - 6.5 4.5 4.0 - - 5.0 - 7.5 10 6.0 5.5 9.0 11 7.0 - - 12 8.5 - - 16 10.0 - - 18 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter "Introduction", section "Maximum power dissipation". The component temperature rise (DT) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 2002 Oct 09 35 BCcomponents Product specification Metallized polypropylene filter capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.28. 144x12(halfpage) thermocouple CBA758 Fig.28 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 2002 Oct 09 36 MKP 416 to 420 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU dU 2 2 x -------- x dt < U Rdc x -------- dt rated dt 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.27. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors in the input filters or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains or line card supply included). VOLTAGE CONDITIONS FOR 6 ABOVE T amb 85 C ALLOWED VOLTAGES Maximum continuous RMS voltage URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc Example C = 0.1 F - 250 V used for the sine voltage signal of 2 VRMS at 1 MHz superimposed on 160 V (DC). The ambient temperature is 50 C. The circuit is high ohmic during a capacitor breakdown. Checking the conditions: 1. The peak voltage Up = 162.8 V is lower than 250 V (DC). 2. The peak-to-peak voltage 5.6 V is lower than 2 x 2 x 100 V ( AC ) = 280 Up - p . 3. The signal is not pulsed. 4. This is a sinewave, according the curves in, the capacitor can be applied. 5. Not applicable. 6. Not applicable. 2002 Oct 09 37 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 MARKING Product marking CAPACITORS WITH PITCH = 5 mm The capacitors are marked on the side (see Fig.29) with the following information: 144x12(halfpage) FRONT FACE 27n G 250V BC 0001 418 1. Capacitance code in accordance with "IEC 60062": n = nF 2. Tolerance on rated capacitance: G = 2%; J = 5% CBB069 3. Rated (DC) voltage (e.g. 250 V) 4. Code for manufacturer Fig.29 Example of marking for a capacitor with pitch = 5 mm. 5. Year and week of manufacture (e.g. 0001) 6. Manufacturers type designation. CAPACITORS WITH PITCH = 10 mm The capacitors are marked on the front face (see Fig.30) with the following information: 144x12(halfpage) FRONT FACE 1. Year and week of manufacture (e.g. 0001) 0001 100n G 160V MKP 417 BC-HQ 2. Capacitance code in accordance with "IEC 60062" 3. Tolerance on rated capacitance: G = 2%; J = 5% 4. Rated (DC) voltage (e.g. 160 V) 5. Code for dielectric material (MKP) 6. Manufacturer's type designation (e.g. 417) CBB070 7. Code for manufacturer Fig.30 Example of marking for a capacitor with pitch = 10.0 mm. 8. Code for factory of origin (HQ). CAPACITORS WITH PITCH = 15 mm The capacitors are marked on the top (see Fig.31) with the following information: HEAD FACE 144x12(halfpage) 1. Rated capacitance code in accordance with "IEC 60062" FRONT FACE 300n G 63V 416 MKP 2. Tolerance on rated capacitance: G = 2%; J = 5% BC HQ0001 3. Rated voltage (DC) (e.g. 63 V) 4. Manufacturer's type designation (416) 5. Code for dielectric material (MKP); CBB078 and on the side with the following information: Fig.31 Example of marking for a capacitor with pitch = 15.0 mm. 1. Manufacturer 2. Code for factory of origin (HQ) 3. Year and week of manufacture (e.g. 0001). 2002 Oct 09 38 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Package marking The package containing the capacitors is marked as shown in Fig.32. Barcode label marking LINE MARKING EXPLANATION 1 Manufacturer's name 2 Country of origin 3 Sub-family 4 Type description 5 Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") 6 - 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.32 Barcode label. 2002 Oct 09 39 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 QUICK REFERENCE TEST REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat "IEC 60068-2-20" Component solvent resistance load 10 N; 10 s no visible damage legible marking load 5 N; 4 x 90 solder bath: 260 C; 5 s C/C 1% +5 pF tan 5 x 10-4 isopropyl alcohol; 23 C; 5 minutes Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms C/C 1% +5 pF tan 5 x 10-4 Climatic sequence Dry heat: 16 hours; 85 C "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: 2 hours; -55 C "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" C/C 1% +5 pF tan 5 x 10-4 Rins 50% of specified value Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 1% +5 pF Endurance (DC): "IEC 60384-16" 2000 hours: 1.25 x URdc; 85 C Heat storage: "IEC 60384-16" 2000 hours; 85 C Resistance to soldering heat with preheating: "IEC 60384-16" Passive flammability: "IEC 60384-1" Endurance (AC): "IEC 60384-16" body temperature: 85 C; bath temperature: 260 C; dwell time: 10 s class C C/C 1% +5 pF 1000 hours: 85 C 1.25 x URac (RMS); 50 Hz C/C 2% +5 pF tan 5 x 10-4 Rins 50% of specified value C/C 1% +5 pF tan 5 x 10-4 Rins 50% of specified value C/C 1% +5 pF tan 5 x 10-4 tan 5 x 10-4 no burning tan 5 x 10-4 Rins 50% of specified value 2002 Oct 09 40