selos / fasis selos / fasis DIN Rail Terminal Blocks with Screw, Tension Spring and Push-In Connection Technologies Catalog 2013 G Sales and Marketing Center in Bamberg G Company headquarters in Bamberg G STOCKO main plant in Wuppertal automation building electronics ACTIVE WORLDWIDE The Wieland Group employs more than 2,000 people all around the globe. With some 15 locations and subsidiaries, and sales partners in more than 70 countries, Wieland Holding is present in nearly all The group makes us strong Wieland Holding is based in Bamberg, Bavaria, and comprises two independently acting subsidiaries: Wieland Electric and STOCKO Contact. Groundbreaking innovations made Wieland Electric one of the leading suppliers of electrical connection technology. This company, founded in Bamberg in 1910, is the largest subsidiary of Wieland Holding. important key markets worldwide. Always with a clear commitment to the German location where most of the products are still manufactured. 2 STOCKO Contact is based in Wuppertal and joined the Wieland Group in 2001. Stocko has also more than 100 years of company history to its credit and is one of the largest manufacturers of connector systems and crimp contacts. contacts are green Established in industries Control cabinet engineering, industrial automation, building system technology - our large product portfolio provides solutions for all kinds of applications. From innovative interface and network technology to terminal blocks to "safety first" - with modular system solutions and safety components. With Wieland products in your control cabinet, you are always on the safe side. Energy bus systems for distributed automation or indoor and outdoor field Welcome Future bus components - Wieland technology can be found everywhere, and in all kinds of applications. In building system technology, Wieland Electric is the world market leader in pluggable eletrical installation. There are good reasons why our system solutions can be found in the most spectacular building projects worldwide. When it comes to electronic networking, Wieland leads the way to the "smart home". Wieland Electric is 100 years young, and full of innovative energy. And our commitment for the future is not only to find constantly new system solutions for our customers but also social responsibility. Environmentally friendly high-tech products, manufactured to the latest production standards, an audited environmental management system and substantial investments in our locations are all part to this concept. Global commitment and sustainable regional action - Wieland Electric is fit for the future: Contacts are green. 3 fasis / selos Wieland DIN Rail Terminal Blocks - Overview DIN rail terminal blocks with screw connection Feed-through blocks starting at page 12 Ground blocks starting at page 16 Duo feed-through blocks starting at page 20 Knife edge disconnect blocks starting at page 20+31 Multi-tier blocks starting at page 22 Initiator blocks starting at page 26 Fuse blocks starting at page 28 DIN rail terminal blocks with plug-in connection starting at page 34 Function blocks starting at page 24 + 38 Instrument isolating terminals starting at page 40 DIN rail terminal blocks with ring lug connection starting at page 45 High current terminal blocks starting at page 46 Mini blocks starting at page 50 selos CLASSIC starting at page 52 DIN rail terminal blocks with push-in connection Feed-through blocks starting at page 114 4 Ground blocks starting at page 116 Duo feed-through blocks starting at page 118 fasis / selos DIN rail terminal blocks with tension spring connection Feed-through blocks starting at page 62 Ground blocks starting at page 72 Duo feed-through blocks starting at page 78 Knife edge disconnect blocks starting at page 88 Fuse blocks starting at page 90 DIN rail terminal blocks with plug-in connection starting at page 94 Initiator blocks starting at page 100 Mini blocks starting at page 104 Accessories, software and service Software starting at page 138 Accessories starting at page 120 Service, Facts & Data starting at page 139 5 fasis / selos Wieland DIN Rail Terminal Blocks - One System 3 product families, 3 connection technologies - our DIN rail terminal block program is the right choice for every installation, wherever the control cabinet is found-in machinery or plant engineering, energy technology or building installation, or with screw, tension spring or push-in connection. The ultimately flexible DIN rail terminal block systems selos and fasis offer optimum handling and harmonized accessories. This guarantees not only fast wiring time, but also reduces cost of inventory at your facility and in the supply chain. Customized assembly service, customer-specific solutions and a comprehensive service portfolio match our products individually with the requirements of our customers. DIN rail terminal blocks with screw connection - selos DIN rail terminal blocks with push-in connection - fasis WTP 6 fasis / selos - Many Possibilities DIN rail terminal blocks with tension spring connection - fasis WKFN Accessories, software and service 7 selos 8 selos selos - DIN Rail Terminal Blocks with Screw Connection Reliable connection, proven concept! selos is our DIN rail terminal block with screw connection, solid and functional, known worldwide, and in use millions of times over. The selos series combines the classic screw connection with modern connection technology, with the focus on customer benefits and increased efficiency in wiring and the supply chain. The selos CLASSIC series offers the highest-quality connecting technology. Thanks to its unique clamping body design, aluminum or copper wire connections are long-lasting and maintenance-free. The selos product line includes feed-through and ground blocks with 2, 3 or 4 termination points, multi-tier blocks in two- and three-tier designs, knife-edge disconnect blocks and fuse blocks. In addition, specialty function blocks are available with a wide variety of diode circuits and diverse application-specific terminals, such as transformer disconnect terminals. selos has been designed for use in machinery and plant construction as well as hazardous locations subject to explosion. Connection cross-section up to 240 mm Rated current up to 415 A Rated voltage up to 1000 V 9 selos DIN Rail Terminal Blocks with Screw Connection Simply connect * Multi-wire connection * Connect with or without ferrules Reliable and maintenance-free * Rugged clamping body design * One-piece threaded collar * Stress-free connecting and reconnecting Smaller size Uniform design Fewer accessories Time-saving assembly Plug & Play * Snap-on screwless ground blocks * Dual jumpering channels * Plug-in jumper bars * Plug-in test adapter 10 selos Wieland jumpering system - Perfect technology Perfect technology Copper Steel * Copper current bar guarantees low contact resistance * Steel spring guarantees strength, durability, and long-term stability Extremely rugged! * Indestructible steel spring * Vibration-proof connection Simple customization * Individual poles easy to remove * Circuits easy to identify Wieland marking system - Reliable identification Marking strips - Dependable * Maximum hold to the terminal * Solidify integrity of rail assembly Endless strip - Effective * Mounting facility for endless strips permits single step marking of entire assembly * Continuous labeling * Uses commercially available labeling systems Marking tags - Individual * Individual labeling with minimum effort * Ideal for service and maintenance 11 selos Feed-through blocks with screw connection WT 2,5 * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Max. electrical data: 32 A / 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 1.5 mm2 Description Type Part No. Feed-through block, gray Feed-through block, blue WT 2,5 WT 2,5 BL 58.503.0055.0 58.503.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 48 mm / 48 mm 9 mm EMD IEC UL EN 60 947-7-1 2 0.14 - 4 mm 0.14 - 4 mm2 26 - 12 24 A 20 A 1000 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Max. electrical data: 41 A / 6 mm2 Part No. 07.313.2555.0 Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.7027.0 Z7.280.8027.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WT 4 WT 4 BL 58.504.0055.0 58.504.0055.6 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 48 mm / 48 mm 9 mm EMD IEC UL EN 60 947-7-1 2 0.14 - 6 mm 0.14 - 6 mm2 26 - 10 32 A 30 A 1000 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 6 * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 6 mm2 * Max. electrical data: 57 A / 10 mm2 * Connection capacity: 2 wires, equal size 0.2 - 4 mm2 07.313.2555.0 Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.2027.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WT 6 WT 6 BL 58.506.0055.0 58.506.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 8 mm / 48 mm / 48 mm 11 mm EMD IEC UL EN 60 947-7-1 0.2 - 10 mm2 0.2 - 10 mm2 24 - 8 41 A 50 A 1000 V 600 V 8 kV 3 Accessories End plate Cross connector 2 pole 3 pole 4 pole 5 pole 10 pole 10 10 10 10 10 20 20 Std. Pack 100 100 ? 26 - 10 30 A 600 V Part No. 2 pole 3 pole 4 pole 5 pole 10 pole Std. Pack pending AP WT 2,5-10 IVB WKF 4-2 IVB WKF 4-3 IVB WKF 4-4 IVB WKF 4-5 IVB WKF 4-10 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 12 CSA Type Accessories End plate Cross connector ? 26 - 12 20 A 600 V AP WT 2,5-10 IVB WKF 2,5-2 IVB WKF 2,5-3 IVB WKF 2,5-4 IVB WKF 2,5-5 IVB WKF 2,5-10 IVB WKF 2,5-20 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole 100 100 pending Type Accessories End plate Cross connector WT 4 CSA Std. Pack CSA Std. Pack 10 10 10 10 10 20 Std. Pack 100 100 ? pending 24 - 8 50 A 600 V Type Part No. AP WT 2,5-10 IVB WKFN 6-2 IVB WKFN 6-3 IVB WKFN 6-4 IVB WKFN 6-5 IVB WKFN 6-10 07.313.2555.0 Z7.282.5227.0 Z7.282.5327.0 Z7.282.5427.0 Z7.282.5527.0 Z7.282.6027.0 Std. Pack 10 10 10 10 10 10 selos WT 10 * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 10 mm2 * Max. electrical data: 76 A / 16 mm2 * Connection capacity: 2 wires, equal size 0.5 - 6 mm2 Description Type Part No. Feed-through block, gray Feed-through block, blue WT 10 WT 10 BL 58.510.0055.0 58.510.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 10 mm / 48 mm / 48 mm 13 mm EMD IEC UL EN 60 947-7-1 2 0.5 - 16 mm 0.5 - 16 mm2 20 - 6 57 A 65 A 1000 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Cross connector WT 16 * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 16 mm2 * Max. electrical data: 101 A / 25 mm2 * Connection capacity: 2 wires, equal size 2.5 - 10 mm2 Type CSA Type Part No. WT 16 WT 16 BLAU 58.516.0055.0 58.516.0055.6 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Cross connector Type CSA 10 10 Std. Pack 50 50 ? pending 16 - 4 85 A 600 V Part No. AP WT 16 2 pole IVB WKF 16-2 Std. Pack 07.313.2555.0 Z7.283.8227.0 Feed-through block, gray Feed-through block, blue 12 mm / 58 mm / 54mm 15 mm EMD IEC UL EN 60 947-7-1 2 4 - 25 mm 1.5 - 25 mm2 16 - 4 76 A 85 A 1000 V 600 V 8 kV 3 ? 20 - 6 65 A 600 V Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 50 pending Part No. AP WT 2,5-10 2 pole IVB WKF 10-2 Std. Pack 07.313.2755.0 Z7.284.4227.0 Std. Pack 10 10 Accessories for selos WT 2,5 - WT 16 Accessories Cover with warning symbol Partition for WT 2,5 - WT 10 Partition for WT 16 Test adapter modular for WT 2,5 and 4 End plate for test adapter * for WT 2,5 for WT 4 for WT 6 for WT 10 for WT 16 Type Part No. AD WT 2,5 AD WT 4 AD WT 6/10 AD WT 6/10 AD WT 16 TW WT 2,5-10 TW WT 4E PS WKC/F ZP/AP PS 04.344.1455.8 04.344.1655.8 04.344.1855.8 04.344.1855.8 04.344.2255.8 07.313.2655.0 07.313.2855.0 Z1.299.9753.0 07.312.6053.0 Std. Pack 10 10 10 10 10 10 10 10 10 * for WT4 an end cover plate must be snapped in after each test connector 13 selos Feed-through blocks with screw connection WKN 35 / U * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 35 mm2 Description Type Part No. Feed-through block, gray Feed-through block Exi, blue WKN 35/U WKN 35/U BLAU 57.535.0155.0 57.535.0155.6 16 mm / 71 mm / 68 mm 18 mm NJ8TMnD9 IEC UL EN 60 947-7-1 2 10 - 35 mm 10 - 2 AWG 10 - 50 mm2 125 A 150 A 1000 V 600 V 8 kV 3 KEMA 02 ATEX 2114 U ? CSA EN 60 079-0/-7 12 - 2 AWG 10 - 35 mm2 10 - 50 mm2 150 A 86/124 A 600 V 690 V1) Accessories Partition, gray Cross connector with screws, insulated Type Part No. 2 pole 3 pole up to 6 pole up to 12 pole Single cover with marking facility Cover with warning symbol over 4 blocks TWN 35 IVB WKN 35 - 2 IVB WKN 35 - 3 IVB WKN 35 - 6 IVB WKN 35 - 12 AD VB 35 GELB AD VB 16/4 GELB 07.311.7855.0 Z7.285.2227.0 Z7.285.2327.0 Z7.285.2627.0 Z7.285.3227.0 04.326.2553.8 04.343.5256.8 Description Type Part No. Feed-through block, gray Feed-through block Exi, blue WKN 70/U WKN 70/U BLAU 57.570.0155.0 57.570.0155.6 24 mm / 77 mm / 81 mm 24 mm NJ8TMD9 IEC UL EN 60 947-7-1 2 10 - 70 mm 6 - 2/0 AWG 16 - 95 mm2 192 A 175/175 A 1000 V 600 V 8 kV 3 KEMA 02 ATEX 2114 U ? CSA EN 60 079-0/-7 6 - 2/0 AWG 10 - 70 mm2 16 - 95 mm2 170 A 179/179 A2) 600 V 690 V Accessories Partition, gray Cross connector with screws, insulated Type Part No. Description Type Part No. Feed-through block, gray Feed-through block Exi, blue WKN 150/U WKN 150/U BLAU 57.597.0155.0 57.597.0155.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Enclosed design Cross section fine-stranded Cross section solid/stranded Rated current Rated voltage Rated impulse voltage Pollution degree WKN 70 / U * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 70 mm2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Enclosed design Cross section fine-stranded Cross section solid/stranded Rated current Rated voltage Rated impulse voltage Pollution degree TWN 70 2 pole VB WKN 70 - 2 3 pole VB WKN 70 - 3 up to 6 pole VB WKN 70 - 6 AD VB 70 GELB Single cover with marking facility Cover with warning symbol over 4 blocks AD VB 24/4 GELB WKN 150 / U * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 150 mm2 * Ex e I/II ? II GD IM2 Follow the EX installation instructions on page 143 * Enclosed design General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Partition, gray Cross connector with screws, insulated 2 pole 3 pole up to 6 pole Cover with warning symbol over 4 blocks 14 1) 07.311.7955.0 Z7.286.3227.0 Z7.286.3327.0 Z7.286.3627.0 04.326.2653.8 04.343.5356.8 Std. Pack 20 20 Std. Pack 10 5 5 5 5 10 10 Std. Pack 20 20 Std. Pack 10 10 10 10 10 10 Std. Pack 10 10 28 mm / 96 mm / 99 mm 30 mm 8TMD9 KEMA 02 ATEX 2114 U ? IEC UL CSA EN 60 947-7-1 EN 60 079-0/-7 35 - 150 mm2 2 / 0 AWG - 350 kcmil 2 / 0 AWG - 350 kcmil 35 - 150 mm2 35 - 185 mm2 35 - 185 mm2 309 A 335/335 A 365 A 290/309 A2) 1000 V 600 V 600 V 690 V 8 kV 3 Type Part No. VB WKN 150 - 2 VB WKN 150 - 3 VB WKN 150 - 6 AD VB 28/4 GELB Z7.287.1227.0 Z7.287.1327.0 Z7.287.1627.0 04.343.5456.8 Std. Pack 5 5 5 10 For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are 2) With/without jumper to be enclosed by partitions selos Supply set Description Type Part No. Supply set Supply set Supply set Supply set WKN 70 3D/N/SL/U WKN 70 3D/2N/SL/U WKN 150/70 3D/N/SL/U WKN 150/3D/N/U 57.570.9855.0 57.570.9955.0 57.597.9855.0 57.597.9955.0 Std. Pack 1 1 1 1 15 selos Ground blocks with screw connection WT 2,5 PE * Ground block with screw connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Connection capacity: 2 wires, equal size 0.14 - 1.5 mm2 Description Type Part No. Ground block, green/yellow WT 2,5 PE 58.503.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 4 PE * Ground block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 * Ground block with screw connection for mounting on TS 35 * Nominal cross section 6 mm2 * Connection capacity: 2 wires, equal size 0.2 - 4 mm2 600 V 600 V Part No. 07.313.2555.0 Description Type Part No. Ground block, green/yellow WT 4 PE 58.504.9055.0 6 mm / 48 mm / 48 mm 9 mm EMD IEC UL EN 60 94-7-2 0.14 - 6 mm2 0.14 - 6 mm2 26 - 10 1000 V 8 kV 3 600 V CSA Part No. 07.313.2555.0 Description Type Part No. Ground block, green/yellow WT 6 PE 58.506.9055.0 Accessories End plate 600 V Std. Pack 100 ? 600 V AP WT 2,5 - 10 1000 V 8 kV 3 10 26 - 10 Type 8 mm / 48 mm / 48 mm 11 mm EMD IEC UL EN 60 94-7-2 0.2 - 10 mm2 0.2 - 10 mm2 24 - 8 Std. Pack pending Accessories End plate General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data ? 26 - 12 AP WT 2,5 - 10 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 pending Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 16 1000 V 8 kV 3 CSA Accessories End plate Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 6 PE 5 mm / 48 mm / 48 mm 9 mm EMD IEC UL EN 60 94-7-2 2 0.14 - 4 mm 0.14 - 4 mm2 26 - 12 Std. Pack CSA Std. Pack 10 Std. Pack 100 ? pending 24 - 8 600 V Type Part No. AP WT 2,5 - 10 07.313.2555.0 Std. Pack 10 selos WT 10 PE * Ground block with screw connection for mounting on TS 35 * Nominal cross section 10 mm2 * Connection capacity: 2 wires, equal size 0.5 - 6 mm2 Description Type Part No. Ground block, green/yellow WT 10 PE 58.510.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate WT 16 PE * Ground block with screw connection for mounting on TS 35 * Nominal cross section 16 mm2 * Connection capacity: 2 wires, equal size 2.5 - 10 mm2 10 mm / 48 mm / 48 mm 13 mm EMD IEC UL EN 60 94-7-2 2 0.5 - 16 mm 0.5 - 16 mm2 20 - 6 1000 V 8 kV 3 600 V CSA 600 V Part No. AP WT 2,5 - 10 07.313.2555.0 Description Type Part No. WT 16 PE 58.516.9055.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate 1000 V 8 kV 3 600 V ? 20 - 6 Type 12 mm / 58 mm / 54 mm 15 mm EMD IEC UL EN 60 94-7-2 4 - 25 mm2 1.5 - 25 mm2 16 - 4 50 pending Ground block, green/yellow General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack CSA Std. Pack 10 Std. Pack 100 ? pending 16 - 4 600 V Type Part No. AP WT 16 07.313.2755.0 Std. Pack 10 17 selos Ground blocks with screw connection WKN 35 S L / U * Ground block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 35 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Enclosed design Description Type Part No. Ground block, green/yellow WKN 35 SL/U 57.535.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKN 70 SL / U * Ground block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 70 mm2 * Ex e I/II ?II 2GD IM2 Follow the EX installation instructions on page 143 * Enclosed design 800 V 8 kV 3 600 V 600 V Type Part No. Ground block, green/yellow WKN 70 SL/U 57.570.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 20 16 mm / 63 mm / 68 mm 20 mm EJ8TMnD9 KEMA 02 ATEX 2114 U ? IEC UL CSA EN 60 947-7-2 EN 60 079-0/-7 2 10 - 35 mm 10 - 35 mm2 10 - 50 mm2 10 - 50 mm2 10 - 2 10 - 2 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 18 Std. Pack 24 mm / 75 mm / 81 mm 24 mm E8TMD9 IEC UL EN 60 947-7-2 10 - 70 mm2 16 - 95 mm2 6 - 2/0 800 V 8 kV 3 600 V CSA 6 - 2/0 600 V Std. Pack 20 KEMA 02 ATEX 2114 U ? EN 60 079-0/-7 10 - 70 mm2 16 - 95 mm2 selos 9700 A / 35 E S 35 * Ground block with screw connection for mounting on TS 35 * Nominal cross section 35 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow 9700 A/35 E S 35 Z2.302.0621.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9700 A / 70 E S 35 * Ground block with screw connection for mounting on TS 35 * Nominal cross section 70 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Std. Pack 17 mm / 56 mm / 35 mm AM IEC EN 60 947-7-2 35 mm2 50 mm2 UL CSA KEMA 02 ATEX 2114 U ? EN 60 079-0/-7 8-2 600 V Description Type Part No. Ground block, green/yellow 9700 A/70 E S 35 Z2.302.0421.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 25 Std. Pack 10 25 mm / 57 mm / 57 mm MD IEC EN 60 947-7-2 70 mm2 120 mm2 UL 6 - 2/0 CSA KEMA 02 ATEX 2114 U ? EN 60 079-0/-7 6 - 2/0 600 V 19 selos Duo feed-through and knife edge disconnect block with screw connection WT 4 D1/2 * Duo feed-through block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Max. electrical data: 41 A / 6 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Description Type Part No. Duo feed-through block, gray Duo feed-through block, blue WT 4 D1/2 WT 4 D1/2 BL 58.504.5055.0 58.504.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector WT 4 D2/2 * Duo feed-through block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Max. electrical data: 41 A / 6 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0,14 - 2,5 mm2 20 Part No. Part No. WT 4 D2/2 WT 4 D2/2 BLAU 58.504.5155.0 58.504.5155.6 6 mm / 68 mm / 50 mm 9 mm EMD IEC UL EN 60 947-7-1 0.14 - 6 mm2 0.14 - 6 mm2 26 - 10 32 A 30 A 500 V 300 V 6 kV 3 Type CSA 07.313.3155.0 07.313.2855.0 Z7.261.1227.0 Z7.261.1527.0 Z7.261.2027.0 Type Part No. Knife edge disconnect block, gray Knife edge disconnect block, blue with 2 test bolts, gray WT 4 TKM WT 4 TKM BL WT 4 TKM P 58.504.2055.0 58.504.2055.6 58.504.2355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 56 mm / 50 mm 9 mm EMD IEC UL Accessories End plate Partition Cross connector Type AP WT 4 D1/2 TW WT 4 E 2 pole IVB WKF 4-2 5 pole IVB WKF 4-5 10 pole IVB WKF 4-10 26 - 10 16 A 300 V Std. Pack 100 100 ? 26 - 10 30 A 300 V Description 24 A 500 V 6 kV 3 10 10 10 10 10 pending Part No. AP WT 4 D2/2 TW WT 4 E 2 pole IVB WKF 4-2 5 pole IVB WKF 4-5 10 pole IVB WKF 4-10 0.14 - 6 mm2 0.14 - 6 mm2 Std. Pack 07.313.2955.0 07.313.2855.0 Z7.261.1227.0 Z7.261.1527.0 Z7.261.2027.0 AP WT 4 D1/2 TW WT 4 E 2 pole IVB WKF 4-2 5 pole IVB WKF 4-5 10 pole IVB WKF 4-10 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree ? 26 - 10 30 A 300 V Type General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 pending Duo feed-through block, gray Duo feed-through block, blue Accessories End plate Partition Cross connector * Knife edge disconnect block for mounting on TS 35 Type CSA Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 4 TKM... 6 mm / 56 mm / 50 mm 9 mm EMD IEC UL EN 60 947-7-1 2 0.14 - 6 mm 0.14 - 6 mm2 26 - 10 32 A 30 A 500 V 300 V 6 kV 3 Std. Pack Std. Pack 10 10 10 10 10 Std. Pack 100 100 100 CSA 26 - 10 16 A 300 V Part No. 07.313.2955.0 07.313.2855.0 Z7.261.1227.0 Z7.261.1527.0 Z7.261.2027.0 Std. Pack 10 10 10 10 10 selos Duo-ground blocks with screw connection WT 4 D 1/2 PE * Duo-ground block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Description Type Part No. Duo-ground block WT 4 D1/2 PE 58.504.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 4 D2/2 PE * Duo-ground block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 6 mm / 56 mm / 50 mm 9 mm EMD IEC UL EN 60 947-7-2 2 0.14 - 6 mm 0.14 - 6 mm2 26 - 10 500 V 6 kV 3 300 V CSA 300 V Part No. AP WT 4 D1/2 07.313.2955.0 Description Type Part No. Duo-ground block WT 4 D2/2 PE 58.504.9155.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate 500 V 6 kV 3 300 V ? 26 - 10 Type 6 mm / 68 mm / 50 mm 9 mm EMD IEC UL EN 60 947-7-2 0.14 - 6 mm2 0.14 - 6 mm2 26 - 10 100 pending Accessories End plate General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack CSA Std. Pack 100 Std. Pack 100 ? pending 26 - 10 300 V Type Part No. AP WT 4 D2/2 07.313.3155.0 Std. Pack 10 21 selos Multi-tier blocks with screw connection WKN 2,5 E / U * Multi-tier block for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 WKN 2,5 E / U / VB * Multi-tier block, vertically jumpered, with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Description Type Part No. Multi-tier block, gray WKN 2,5 E/U 57.403.7055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 5 mm / 66 mm / 64 mm 8 mm EMD IEC UL EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 22 - 12 24 A 20/25 A 500 V 600 V 6A 3 Description Type Part No. Multi-tier block, black WKN 2,5 E/U/VB 57.403.6955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 5 mm / 66 mm / 64 mm 8 mm EMD IEC UL EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 22 - 12 24 A 20/25 A 500 V 600 V 6A 3) CSA Std. Pack 100 ? 24 - 12 25 V 600 V CSA Std. Pack 100 ? 24 - 12 25 A 600 V Accessories for selos WKN 2,5 E/U... Accessories End plate Partition Cross connector with screws, insulated gray gray 2 pole 3 pole up to 12 pole Partition plate with marking facility yellow Single cover with marking facility yellow Cover with warning symbol over 4 blocks 22 Type Part No. APN 2,5 E TWN 2,5 E IVB WK 2,5 - 2 IVB WK 2,5 - 3 IVB WK 2,5 - 12 TS 2,5 GELB AD VB 2,5 GELB 07.312.1755.0 07.312.1855.0 Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 07.311.2053.8 04.326.2053.8 04.343.4756.8 Std. Pack 10 10 10 10 10 10 10 10 selos WT 4 E * Multi-tier block for mounting on TS 35 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Description Type Part No. Multi-tier block, gray Multi-tier block, blue WT 4 E WT 4 E BL 58.504.7055.0 58.504.7055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 72 mm / 67 mm 9 mm EMD IEC UL EN 60 947-7-1 2 0.14 - 6 mm 0.14 - 6 mm2 26 - 10 32 A 30 A 800 V 300 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector WT 4 E VB * Multi-tier block, vertically jumpered, with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Type * Multi-tier ground block with screw connection for mounting on TS 35 * Nominal cross section 4 mm2 Type Part No. WT 4 E VB 58.504.6955.1 6 mm / 72 mm / 67 mm 9 mm EMD IEC UL EN 60 947-7-1 0.14 - 6 mm2 0.14 - 6 mm2 26 - 10 32 A 30 A 800 V 300 V 8 kV 3 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Type CSA Part No. Type Part No. WT 4 E PE 58.504.9255.0 Accessories End plate 100 ? Std. Pack 07.313.3355.0 07.313.2855.0 Z7.261.1227.0 Z7.261.1527.0 Z7.261.2027.0 AP WT 4 E TW WT 4 E 2 pole IVB WKF 4-2 5 pole IVB WKF 4-5 10 pole IVB WKF 4-10 6 mm / 72 mm / 67 mm 9 mm EMD IEC UL EN 60 947-7-2 0.14 - 6 mm2 0.14 - 6 mm2 26 - 10 800 V 8 kV 3 Std. Pack 26 - 10 30 A 300 V Muli-tier ground block, green/yellow Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 10 10 10 10 10 pending Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack 07.313.3355.0 07.313.2855.0 Z7.261.1227.0 Z7.261.1527.0 Z7.261.2027.0 Multi-tier block, black Accessories End plate Partition Cross connector ? 26 - 10 30 A 300 V Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 pending Part No. AP WT 4 E TW WT 4 E 2 pole IVB WKF 4-2 5 pole IVB WKF 4-5 10 pole IVB WKF 4-10 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WT 4 E PE CSA Std. Pack 300 V CSA 10 10 10 10 10 Std. Pack 100 ? pending 26 - 10 300 V Type Part No. AP WT 4 E 07.313.3355.0 Std. Pack 10 23 selos Specialty function blocks with screw connection WT 4 E ... * Function block with screw connection for mounting on TS 35 Description Type Part No. Function block, orange WT 4 E... 58.504.XX55.9 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Nominal cross section 4 mm2 * Connection capacity: 2 wires, equal size 0.14 - 2.5 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray 6 mm / 72 mm / 67 mm 9 mm EMD IEC UL EN 60 947-7-1/-2 2 0.14 - 6 mm 0.14 - 6 mm2 26 - 10 26 - 10 Type Part No. AP WT 4 E 07.313.3355.0 The multi-tier block is available on request as a function block for a wide variety of switching tasks. 58.504.8055.9 with inverted diode 24 V DC 400 V 1 A/1000 V 58.504.8255.9 R = 4,7 K 0,4 W 58.504.7955.9 58.504.8155.9 with inverted diode 400 V 1 A/1000 V 58.504.7255.9 LED red 24 V DC 58.504.8755.9 LED green R = 4,7 K 0,4 W 24 58.504.7455.9 LED red 100 CSA Examples of functions 58.504.8355.9 Std. Pack 58.504.8855.9 with inverted diodes 1 A /400 V 58.504.7355.9 U = 100-500 V Std. Pack 10 selos Three-tier- / Initiator blocks with screw connection WK 2,5-3 D / U * Multi-tier block for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Description Type Part No. Multi-tier block, gray Multi-tier bl., LED (green) betw. signal and + Multi-tier bl., LED (green) betw. signal and - WK 2,5 - 3 D/U WK 2,5 - 3 D/U-NGN WK 2,5 - 3 D/U-PGN 57.503.8855.0 57.503.8955.0 57.503.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 79 mm / 69 mm 7 mm EMD IEC UL EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 22 - 12 24 A 25 A 400 V* 300 V* 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 2,5 - 3 D/U-NGN WK 2,5 - 3 D/U-PGN Accessories Partition, gray WK 2,5-3 D / SL * Multi-tier block for mounting on TS 35 * Nominal cross section 2,5 mm2 ? 22 - 12 25 A 300 V* Type Part No. TW 2,5 - 3 D/U 07.312.1255.0 Description Type Part No. Multi-tier block, gray Multi-tier bl., LED (green) betw. signal and + Multi-tier bl., LED (green) betw. signal and - WK 2,5 - 3 D SL WK 2,5 - 3 D SL-NGN WK 2,5 - 3 D SL-PGN 56.503.8355.0 56.503.8455.0 56.503.8555.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 24 V 50 50 50 Std. Pack 50 24 V 24 V WK 2,5 - 3 D SL-NGN CSA Std. Pack WK 2,5 - 3 D SL-PGN Accessories Partition, gray 6 mm / 79 mm / 69 mm 7 mm EMD IEC UL EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 22 - 12 24 A 25 A 400 V* 300 V* 6 kV 3 CSA Std. Pack 50 50 50 ? 22 - 12 25 A 300 V* Type Part No. TW 2,5 - 3 D/U 07.312.1255.0 Std. Pack 50 24 V Accessories for selos WK 2,5-3 D/... * The use of cross connectors (jumper combs), requires partitions in order to maintain the air and creepage distances. * 24 Vy with LED Accessories Cross connector with screws, insulated, for upper level Jumper comb, angled, insulated (red), for lower level Jumper comb, angled, insulated (blue), for lower level 2 pole 3 pole up to 12 pole 2 pole 3 pole up to 12 pole 2 pole 3 pole up to 12 pole Type Part No. IVB WK/3D-02 IVB WK/3D-03 IVB WK/3D-12 IVB WK 2,5-K-2 ROT IVB WK 2,5-K-3 ROT IVB WK 2,5-K-12 ROT IVB WK 2,5-K-2 BLAU IVB WK 2,5-K-3 BLAU IVB WK 2,5-K-12 BLAU Z7.270.0227.0 Z7.270.0327.0 Z7.270.1227.0 Z7.267.0227.5 Z7.267.0327.5 Z7.267.1227.5 Z7.267.0227.6 Z7.267.0327.6 Z7.267.1227.6 Std. Pack 10 10 10 10 10 10 10 10 10 25 selos Initiator blocks with screw connection WK 2,5-4 KI / U * Initiator block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Description Type Part No. Initiator block, gray Multi-tier bl., LED (green) betw. signal and + Multi-tier bl., LED (green) betw. signal and - WK 2,5 - 4 KI/U WK 2,5 - 4 KI/U-NGN WK 2,5 - 4 KI/U-PGN 57.503.7855.0 57.503.7955.0 57.503.8055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 53 mm / 69 mm 7 mm EMD IEC UL EN 60 947-7-1 DIN VDE 0611 T1 0.5 - 2.5 mm2 0.5 - 4 mm2 22 - 12 24 A 25 A 250 V* 300 V* 4 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 2,5 - 4 KI/U-NGN WK 2,5 - 4 KI/U-PGN 24 V * Initiator block with screw connection for mounting on TS 35 * Nominal cross section 2.5 mm2 ? 22 - 12 25 A 300 V* Accessories Partition, gray Type Part No. TW 2,5 - 4 K/U 07.312.0555.0 Description Type Part No. Initiator block, gray Multi-tier bl., LED (green) betw. signal and + Multi-tier bl., LED (green) betw. signal and - Multi-tier bl., LED (red) betw. signal and - WK 2,5 - 4 KI SL WK 2,5 - 4 KI SL-NGN WK 2,5 - 4 KI SL-PGN WK 2,5 - 4 KI SL-PRT 56.503.7355.0 56.503.7455.0 56.503.7555.0 56.503.7655.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data WK 2,5 - 4 KI SL-PGN WK 2,5 - 4 KI SL-PRT Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Partition, gray 24 V 100 100 100 Std. Pack 10 24 V WK 2,5-4 KI / SL WK 2,5 - 4 KI SL-NGN CSA Std. Pack 6 mm / 64 mm / 69 mm 7 mm EMD IEC UL EN 60 947-7-1 DIN VDE 0611 T1 0.5 - 2.5 mm2 0.5 - 4 mm2 22 - 12 24 A 25 A 250 V* 300 V* 4 kV 3 CSA Std. Pack 100 100 100 100 ? 22 - 12 25 A 300 V* Type Part No. TW 2,5 - 4 K/U 07.312.0555.0 Std. Pack 10 24 V Accessories for selos WK 2,5-4 KI/... * The use of cross connectors (jumper combs), requires partitions in order to maintain the air and creepage distances. * 24 Vy with LED Accessories Cross connector with screws, insulated, for upper level Jumper comb, angled, insulated (red), for lower level Jumper comb, angled, insulated (blue), for lower level 26 2 pole 3 pole up to 12 pole 2 pole 3 pole up to 12 pole 2 pole 3 pole up to 12 pole Type Part No. IVB WK/3D-02 IVB WK/3D-03 IVB WK/3D-12 IVB WK 2,5-K-2 ROT IVB WK 2,5-K-3 ROT IVB WK 2,5-K-12 ROT IVB WK 2,5-K-2 BLAU IVB WK 2,5-K-3 BLAU IVB WK 2,5-K-12 BLAU Z7.270.0227.0 Z7.270.0327.0 Z7.270.1227.0 Z7.267.0227.5 Z7.267.0327.5 Z7.267.1227.5 Z7.267.0227.6 Z7.267.0327.6 Z7.267.1227.6 Std. Pack 10 10 10 10 10 10 10 10 10 selos Initiator blocks with screw connection WK 2,5-4 KOI / U * Initiator block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Description Type Part No. Initiator block, gray WK 2,5-4 KOI/U 57.503.7055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current, feed-through Rated voltage Rated impulse voltage Pollution degree Accessories Cross connector with screws, for signal feed through WK 2,5-4 KOI / U-NGN WK 2,5-4 KOI / U-PGN * Initiator block with screw connection for mounting on TS 35 and TS 32 * NGN: With LED (green) between signal and plus PNG: Wit LED (green) between signal and minus * Nominal cross section 2.5 mm2 5 mm / 92 mm / 45 mm 10 mm EMD IEC UL EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 22 - 12 16 A 20/30 A 400 V 300 V 6 kV 3 Type CSA Type Part No. Initiator block, gray Initiator block, gray WK 2,5-4 KOI/U-NGN WK 2,5-4 KOI/U-PGN 57.503.7155.0 57.503.7255.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current, feed-through Rated voltage Rated impulse voltage Pollution degree 5 mm / 92 mm / 45 mm 10 mm EMD IEC UL EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 22 - 12 16 A 20/30 A 24 DC 24 V NGN: Indicator: R = 2.2 K 0,35 W Lamp color: green ? Std. Pack Z7.280.0227.0 Z7.280.0327.0 Z7.280.0627.0 Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 22 - 12 25 A 300 V Part No. 2 pole VB WK 2,5-2 3 pole VB WK 2,5-3 up to 6 pole VB WK 2,5-6 Std. Pack CSA 10 10 10 Std. Pack 50 50 ? 22 - 12 25 A 24 V PGN: Indicator: R = 2.2 K 0,35 W Lamp color: green Accessories for selos WK 2,5-4 KOI/U... Accessories End plate Partition Cross connector for voltage supply gray gray 2 pole 3 pole up to 20 pole Partition plate with marking facility yellow Single cover with marking facility yellow Cover strip for cross connectors over 10 blocks Tear-off marking strip, red, marked "+" red Tear-off marking strip, blue, marked "-" blue Type Part No. AP 2,5-4 KO TW 2,5-4 KO VB WK 2,5 KO-2 VB WK 2,5 KO-3 VB WK 2,5 KO-20 TS 2,5 GELB AD VB 2,5 GELB AD VB 5/10 9705 A/5/10 B + ROT 9705 A/5/10 B - BLAU 07.310.9355.0 07.310.9455.0 07.257.0227.0 07.257.0327.0 07.257.2027.0 07.311.2053.8 04.326.2053.8 04.342.0556.0 04.855.0253.5 04.855.0353.6 Std. Pack 50 50 100 100 50 10 10 10 25 25 27 selos Fuse blocks with screw connection WK 4 TKG... with THSi 5 x 20 * Disconnect base block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 Description Type Part No. Disconnect base block, gray Fuse disconnect lever, gray Fuse disconnect lever with LED 12 - 24 V2) Fuse disconnect lever with LED 24 - 60 V2) Fuse disconnect lever with GL 110 - 250 V2) WK 4 TKG/U THSI 5x20 THSI 5x20 LED24 THSI 5x20 LED60 THSI 5x20 GL250 57.504.4055.0 Z1.298.1053.0 Z1.298.1153.0 Z1.298.1253.0 Z1.298.1353.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 4 TKG... with THSi 6,3 x 32 * Disconnect base block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 Part No. WK 4 TKG/U THSI 6,3x32 THSI 6,3x32 LED24 THSI 6,3x32 LED60 THSI 6,3x32 GL250 57.504.4055.0 Z1.298.1653.0 Z1.298.1753.0 Z1.298.1853.0 Z1.298.1953.0 Exclusive shortcircuit protection Single arrangement Group arrangement Single arrangement Group arrangement THSI 5 x 20 THSI 6,3 x 32 250 V 500 V 1.6 W 2.5 W 1.6 W 1.6 W 4.0 W 4.0 W 2.5 W 4.0 W SIST 250 V 1.6 W 1.6 W 2.5 W 1.6 W 28 2) 100 10 10 10 10 CSA 20 - 10 6.3 A1) 250 V2) Std. Pack 100 10 10 10 10 6 mm / 48 mm / 81 mm 8 mm use end plate 07.311.6155.0 to maintain pitch 9 mm EMD IEC UL CSA EN 60 947-7-1, EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 22 - 10 20 - 10 1) 6.3 A1) 10 A1) 2) 2) 800 V 300 V 250 V2) 8 kV 3 The voltage range is determined by the built-in LED display. Depending on the application and the installation method, the possibility of increased temperature must be checked in the closed fuse holders. Maximum power loss at 23 C ambient temperature (according to DIN EN 60947-7-3) Overload protection 22 - 10 10 A1) 300 V2) Type When selecting G fuse inserts, make sure that the specified maximum power loss is not exceeded. The current is determined by the inserted fuse. Rated Voltage 800 V 8 kV 3 2) Disconnect base block, gray Fuse disconnect lever, gray Fuse disconnect lever with LED 12 - 24 V2) Fuse disconnect lever with LED 24 - 60 V2) Fuse disconnect lever with GL 110 - 250 V2) Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Type 1) UL Description General data Width / length / height, incl. TS 7.5 Width disconnect lever THSI 6.3x32 Wire strip length Approvals Technical data 1) 6 mm / 48 mm / 81 mm 9 mm EMD IEC EN 60 947-7-1, EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 Std. Pack Higher ambient temperatures mean additional stress for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications. Indicator (24 V): Lamp color: red Power consumption: 10.3 mA Indicator (220 V): Lamp color: red Power consumption: 0.3 mA selos WK 4 TKG... SIST * Disconnect base block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 Description Type Part No. Disconnect base block, gray Fuse holder for 5 x 20 fuse Fuse holder with LED 24-60 V Fuse holder with GL 220 V WK 4 TKG/U Si ST Si ST LED Si ST GL 57.504.4055.0 Z1.299.4055.0 Z1.299.4155.0 Z1.299.4255.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 48 mm / 68 mm 9 mm EMD IEC EN 60 947-7-1, EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 4 TKG... DIST * Disconnect base block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 22 - 10 10 A 300 V 1) 800 V 8 kV 3 UL 2) Description Type Part No. Disconnect base block, gray Diode plug - without contacts Diode plug - diode Diode plug - diode Diode plug with jumper WK 4 TKG/U DIST ... DIST-1 N 4007-13) DIST-1 N 4007-24) DIST-D 57.504.4055.0 Z1.299.3055.0 Z1.299.3155.0 Z1.299.3355.0 Z1.299.3255.0 Imax = 1 A Imax = 1 A Imax = 10 A General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 6 mm / 48 mm / 68 mm 9 mm EMD IEC EN 60 947-7-1 , EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 UL 22 - 10 10 A 300 V 800 V2) 8 kV 3 Std. Pack 100 10 10 10 CSA 20 - 10 6.3 A1) 250 V Std. Pack 100 10 10 10 10 CSA 20 - 10 6.3 A1) 250 V The current carrying load depends on the component used. Temporary peak voltage 1000 V. Pole assignment Anode Cathode3) of the diode: Cathode Anode4) Accessories for selos WK 4 TKG... with THSi..., SIST and ...DIST Accessories End plate Partition Jumper comb, insulated gray gray 2 pole 3 pole up to 6 pole Type Part No. AP 4 TK TW 4 TK IVB 1 WK 4..-2 IVB 1 WK 4..-3 IVB 1 WK 4..-6 07.311.6155.0 07.311.8155.0 Z7.255.4227.0 Z7.255.4327.0 Z7.255.4627.0 Std. Pack 10 10 10 10 10 29 selos Fuse- and knife edge disconnect blocks with screw connection WK 4 / Si-D / U 5 x 25 * Fuse block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 Description Type Part No. Fuse block, gray w. G-screw cap B DIN 41674, 5 x 25 mm w. G-SG-screw cap A DIN 41674, 5 x 20 mm WK 4/Si-D/U 5 x 25 WK 4/Si-D/U 5 x 20 57.504.1655.0 57.504.1755.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 4 / TKM * Knife edge disconnect block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 * Version with test bolt: CSA: 300 V EN 60 947-7-1 - 690 V / 6 kV / 3 Test bolt can be loaded with 1 A UL Type Part No. Knife edge disconnect block, gray Knife edge disconnect block, blue with 2 test bolts, gray WK 4/TKM/U WK 4/TKM/U BLAU WK 4/TKM/P3/U 57.504.2055.0 57.504.2055.6 57.504.2355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 48 mm / 49 mm 9 mm EMD IEC EN 60 947-7-1 , EN 60 127-6 2 0.5 - 4 mm 0.5 - 6 mm2 20 A 800 V 8 kV 32) 50 50 CSA 20 - 10 10 A 250 V 6.3 A 800 V 8 kV 3 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 30 12 mm / 48 mm / 49 mm 9 mm ED IEC EN 60 947-7-1 , EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 Std. Pack UL 22 - 10 20 A 600 V Std. Pack 100 100 100 CSA 22 - 10 20 A 600 V selos WK 4 TKG-TRST / U * Invertible plug disconnect block with screw connection for mounting on TS 35 and 42 * Nominal cross section 4 mm2 * Version with test bolt: CSA: 300 V EN 60 947-7-1 - 690 V / 6 kV / 3 Test bolt can be loaded with 1 A WK 4 TKS D / U * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 * Same dimensions as types WK 4 TKG / U and types WK 4 / TKM/U Description Type Part No. Invertible plug disconnect block, gray with 2 test bolts, gray WK 4 TKG-TRST/U WK 4 TKG-TRST P3/U 57.504.4555.0 57.504.4855.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 48 mm / 78 mm 9 mm EMD IEC EN 60 947-7-1 , EN 60 127-6 2 0.5 - 4 mm 0.5 - 6 mm2 UL Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 20 A 800 V 8 kV 32) Description Type Part No. Feed-through block, gray WK 4 TKS D/U 57.504.4455.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 22 - 10 10 A 300 V 6 mm / 48 mm / 49 mm 9 mm EMD IEC EN 60 947-7-1, EN 60 127-6 0.5 - 4 mm2 0.5 - 6 mm2 UL 22 - 10 25 A 300 V 32 A 800 V 8 kV 3 Std. Pack 100 100 CSA 22 - 10 20 A 600 V Std. Pack 100 CSA 20 - 10 20 A 600 V Accessories for selos WK 4... Accessories End plate Partition Jumper comb, insulated gray gray 2 pole 3 pole up to 6 pole Type Part No. AP 4 TK TW 4 TK IVB 1 WK 4..-2 IVB 1 WK 4..-3 IVB 1 WK 4..-6 07.311.6155.0 07.311.8155.0 Z7.255.4227.0 Z7.255.4327.0 Z7.255.4627.0 Std. Pack 10 10 10 10 10 31 selos Fuse blocks with screw connection Description WK 4 THSI 5... / U * Integrated lever-action fuse block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 4 mm2 * For 5 mm miniature fuses * The standard block has a storage location for a replacement fuse. Fuse block, gray - with LED 5 - 12 V~/s - with LED 12 - 24 V~/s - with LED 24 - 60 V~/s - with GL 110 - 250 V~/s - with GL 380 - 500 V~/s current consumed. 2.3 - 7 mA current con. 2.8 - 6,2 mA current con. 1.5 - 4 mA current con. 0.13 - 0.55 mA current con. 0.2 - 0.3 mA General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Integrated lever-action fuse block with screw connection for mounting on TS 35 and TS32 * Nominal cross section 4 mm2 * For 6.3 mm miniature fuses * The standard block has a storage location for a replacement fuse. Part No. WK 4/THSi 6,3 ... U WK 4/THSi 6,3 LED 12 U WK 4/THSi 6,3 LED 24 U WK 4/THSi 6,3 LED 60 U WK 4/THSi 6,3 GL 250 U WK 4/THSi 6,3 GL 500 U 57.904.5355.0 57.904.6455.0 57.904.6555.0 57.904.6655.0 57.904.6755.0 57.904.6855.0 current consumed. 2.3 - 7 mA current con. 2.8 - 6.2 mA current con. 1.5 - 4 mA current con. 0.13 - 0.55 mA current con. 0.2 - 0.3 mA General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Maximum power loss at 23 C ambient temperature (according to DIN EN 60947-7-3) THSI 5x20/25 THSI 6,3x32 THSI 5x30 32 250 V 500 V 500 V Overload protection 22 - 10 15 A 600 V2) 6.3 A1) 800 V2) 8 kV 3 Exclusive shortcircuit protection Single arrangement Group arrangement Single arrangement Group arrangement 1.6 W 2.5 W 1.6 W 1.6 W 2.5 W 1.6 W 4.0 W 4.0 W 4.0 W 2.5 W 2.5 W 2.5 W 10 mm / 77 mm / 54 mm 8 mm EMD IEC EN 60 947-7-1, EN 60 127-6 0,5 - 4 mm2 0,5 - 6 mm2 50 50 50 50 50 50 CSA 22 - 10 6.3 A 600 V2) Std. Pack 50 50 50 50 50 50 UL 22 - 10 15 A 600 V2) 10 A1) 800 V2) 8 kV 3 Std. Pack UL Type The fuse blocks of this type have a flip top disconnect lever. It accepts miniature fuses of 5 x 20, 5 x 25 and 5 x 30 mm (terminal width: 8 mm) or 6.3 x 32 mm (terminal width: 10 mm). The hinged lever has latch points both in the open and in the closed position, and can be sealed. All terminal blocks are available in two different versions, i.e. with or without red LEDs functioning as indicators. 1) When selecting G fuse inserts, make sure that the specified maximum power loss is not exceeded. The current is determined by the inserted fuse. 2) The voltage range is determined by the built-in LED display. Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications. Type 57.904.5355.0 57.904.5455.0 57.904.5555.0 57.904.5655.0 57.904.5755.0 57.904.5855.0 Fuse block, gray - with LED 5 - 12 V~/s - with LED 12 - 24 V~/s - with LED 24 - 60 V~/s - with GL 110 - 250 V~/s - with GL 380 - 500 V~/s Info for selos WK 4 THSI... Rated voltage WK 4/THSi 5 ... U WK 4/THSi 5 LED 12 U WK 4/THSi 5 LED 24 U WK 4/THSi 5 LED 60 U WK 4/THSi 5 GL 250 U WK 4/THSi 5 GL 500 U Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 1) Part No. 8 mm / 77 mm / 54 mm 8 mm EMD IEC EN 60 947-7-1, EN 60 127-6 0,5 - 4 mm2 0,5 - 6 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 4 THSI 6,3... / U Type CSA 22 - 10 10 A 600 V2) Accessories and info for selos WK 10/SI... Accessories End plate, gray Cross connector with screws Type Part No. AP 10/Si 2 pole VB WK 10/Si-2 3 pole VB WK 10/Si-3 up to 6 pole VB WK 10/Si-6 Transparent block cover (for 1 block) 1) 07.311.4155.0 Z7.287.0227.0 Z7.287.0327.0 Z7.287.0627.0 04.312.2056.0 Maximum power loss at 23 C ambient temperature (according to DIN EN 60947-7-3) Type WK 10 Si U 5x20 WK 10 Si U 6.3x32 WK 10 Si U 5x25 WK 10 Si U 5x30 Overload protection Exclusive shortcircuit protection Single arrangement Group arrangement Single arrangement Group arrangement 4.0 W/6.3 A 4.0 W/10 A 4.0 W/6.3 A 4.0 W/6.3 A 2.5 W/6.3 A 2.5 W/2.5 A 2.5 W/6.3 A 2.5 W/6.3 A 4.0 W/6.3 A 4.0 W/10 A 4.0 W/6.3 A 4.0 W/6.3 A 4.0 W/6.3 A 2.5 W/2.5 A 4.0 W/6.3 A 4.0 W/6.3 A Std. Pack 10 10 10 10 100 selos WK 10 / SI ... / U * Fuse block with screw cap for mounting on TS 35 * Nominal cross section 10 mm2 * Voltage and current are determined by the built-in LED and the inserted G-fuse. Description Type Part No. Fuse block, gray, with screw cap - A DIN 41674 for G-fuses DIN 41571 - B DIN 41674 for G-fuses DIN 41576 - A DIN 41674 for G-fuses - with screw cap for G-fuses WK 10/Si U 5 x 20 WK 10/Si U 5 x 25 WK 10/Si U 5 x 30 WK 10/Si U 6,3 x 32 57.910.5055.0 57.910.5155.0 57.910.5255.0 57.910.5355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data WK 10 / SI ... / U with indicator * Fuse block with screw cap for mounting on TS 35 and TS 32 * Nominal cross section 10 mm2 * With indicator * Voltage and current are determined by the built-in indicator and the inserted G-fuse. * Feed-through block with screw connection for mounting on TS 35 * Nominal cross section 10 mm2 * Same dimensions as fuse block UL Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage * 57.910.5055.0 * 57.910.5155.0 * 57.910.5255.0 * 57.910.5355.0 Rated impulse voltage Pollution degree max. 10 A 1) 500 V* 250 V~ 250 V~ 500 V~ 500 V~ 6 kV 3 Description Type Part No. Fuse block, gray, with screw cap - A DIN 41674 for G-fuses DIN 41571 - B DIN 41674 for G-fuses DIN 41576 - A DIN 41674 for G-fuses - with screw cap for G-fuses WK 10/Si U 5 x 20M, NGL WK 10/Si U 5 x 20M, GLB WK 10/Si U 6,3 x 32M, NGL WK 10/Si U 6,3 x 32M, GLB 57.910.5455.0 57.910.5855.0 57.910.5755.0 57.910.6155.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Indicator - Current consumed red - 0.16 - 0.8 mA * 57.910.5455.0 yellow - 24 mA * 57.910.5855.0 red - 0.16 - 0.8 mA * 57.910.5755.0 yellow - 24 mA * 57.910.6155.0 Rated impulse voltage Pollution degree WK 10 /SI U D 12 mm / 65 mm / 58 mm 13 mm EJTMD IEC EN 60 947-7-1, EN 60 127-6 1.0 - 10 mm2 1.0 - 16 mm2 22 - 6 15 A 600 V* 600 V 600 V 600 V 600 V 12 mm / 65 mm / 58 mm 13 mm ED IEC EN 60 947-7-1, EN 60 127-6 1.0 - 10 mm2 1.0 - 16 mm2 UL Std. Pack 50 50 50 50 CSA 16 - 6 max. 15 A 600 V* 600 V 600 V 600 V 600 V Std. Pack 50 50 50 50 CSA 22 - 6 15 A 600 V* 16 - 6 max. 15 A 600 V* 110 - 250 V~ 28 V~ 110 - 500 V~ 28 V~ 6 kV 3 150 V 28 V 150 V 28 V 500 V 28 V 500 V 28 V Description Type Part No. Feed-through block, gray WK 10/Si U D 57.910.4955.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree max. 10 A 1) 500 V* 12 mm / 65 mm / 58 mm 13 mm ETMD IEC EN 60 947-7-1 0.5 - 4 mm2 0.5 - 6 mm2 57 A 500 V 6 kV 3 UL 22 - 6 50 A 600 V Std. Pack 50 CSA 16 - 6 65 A 600 V 33 selos PLUG Feed-through blocks with wiecon pluggable connection for PC board terminal type 8113 B, type 8313 B, type 8113 B / VL, type 8113 B / VR, type 8113 B / Top WK 2,5 U / D / 8113 S / V * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2,5 mm2 Description Type Part No. Feed-through block, gray Power block, blue Feed-through block, with LED 25 V, gray Feed-through block, with LED 50 V, gray WK 2,5 U/D/8113 S/V... WK 2,5 U/D/8113 S/V/VK WK 2,5 U/D/8113 S/V/LED 25 WK 2,5 U/D/8113 S/V/LED 50 57.503.2155.0 57.503.2555.6 57.503.2255.0 57.503.2355.0 5 mm / 61 mm / 51 mm 9 mm MD IEC EN 60 947-7-1 0.5 - 2,5 mm2 0.5 - 4 mm2 UL General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WK 2,5 U / 8113 S / V * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2,5 mm2 12 A 250 V 4 kV 3 Accessories End plate, gray Spacer* 2.5 mm thick Cover strip for LED, transparent 10 pole Coding strip * for wiecon PC board connector with 7.5 mm pitch Type Part No. AP 2,5 U/D/8113 S/V ZP 2,5 U/D/8113 S/V AD VB 5/10 P 07.311.9055.0 07.311.9155.0 04.342.3556.8 05.561.0053.0 Description Type Part No. Feed-through block, gray Power block, blue Feed-through block, with LED 25 V, gray Feed-through block, with LED 50 V, gray WK 2,5 U/8113 S/V... WK 2,5 U/8113 S/V/VK WK 2,5 U/8113 S/V/LED 25 WK 2,5 U/8113 S/V/LED 50 57.503.2655.0 57.503.3055.6 57.503.2755.0 57.503.2855.0 5 mm / 44 mm / 51 mm 9 mm MD IEC EN 60 947-7-1 2 0.5 - 2,5 mm 0.5 - 4 mm2 UL General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 12 A 250 V 4 kV 3 Type Accessories End plate, gray AP 2,5 U/8113 S/V Spacer* 2.5 mm thick ZP 2,5 U/8113 S/V Coding strip * for wiecon PC board connector with 7.5 mm pitch WK 2,5 U / D / 8113 S / H * Feed-through block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2,5 mm2 22 - 12 15 A 300 V Part No. Type Part No. Feed-through block, gray WK 2,5 U/8113 S/H 57.503.2055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 44 mm / 48 mm 9 mm MD IEC EN 60 947-7-1 0.5 - 2,5 mm2 0.5 - 4 mm2 Accessories End plate, gray Coding strip Locking piece 12 A 250 V 4 kV 3 10 pole 50 50 50 50 CSA 24 - 12 15 A 300 V Std. Pack 10 10 10 100 Std. Pack 50 50 50 50 CSA 24 - 12 15 A 300 V Std. Pack 07.312.1555.0 07.312.1655.0 05.561.0053.0 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 34 22 - 12 15 A 300 V Std. Pack UL 22 - 12 20 A 300 V Type Part No. AP 2,5 U/8113 S/H 07.311.9855.0 05.584.0053.0 05.576.5853.0 10 10 100 Std. Pack 100 CSA 24 - 12 15 A 300 V Std. Pack 10 100 25 selos PLUG Type 8113 B / ..., 8313 B / ... * Mating orientation parallel to wire entry * For additional pluggable blocks, see wiecon product family Description Spacing 5.00 mm, Rated voltage 250 V unmarked, starting at 2 up to 16 marked with 1- x, starting at 2 up to 16 Spacing 7.50 mm, Rated voltage 400 V unmarked, starting at 2 up to 12 marked with 1- x, starting at 2 up to 12 General data Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Type 8113 B /... VR * Mating orientation 90 towards the wire * For additional pluggable blocks, see wiecon product family Type Part No. 8113 B/2 OB 8113 B/16 OB 8113 B/2 8113 B/16 25.320.3253.0 25.320.4653.0 25.320.0253.0 25.320.1653.0 100 50 100 50 8313 B/2 OB 8313 B/12 OB 8313 B/2 8313 B/12 25.360.3253.0 25.360.4253.0 25.360.0253.0 25.360.1253.0 100 50 100 50 NMD IEC EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 UL 22 - 12 15 A 300 V 12 A 250 V 400 V Accessories Coding strip Type Description Type Part No. Spacing 5.00 mm, Rated voltage 250 V unmarked, starting at 2 up to 16 marked with 1- x, starting at 2 up to 16 8113 B/2 VR OB 8113 B/16 VR OB 8113 B/2 8113 B/16 25.325.3253.0 25.325.4653.0 25.325.0253.0 25.325.1653.0 General data Approvals Technical data NMD Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Coding strip Std. Pack Part No. CSA 24 - 12 15 A 300 V Std. Pack 05.561.9153.0 IEC EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 UL 22 - 12 15 A 300 V 12 A 250 V 400 V Type Part No. 05.561.9153.0 100 Std. Pack 100 50 100 50 CSA 24 - 12 15 A 300 V Std. Pack 100 Accessories for selos WK 2,5 U/... Accessories Cross connector with screws, insulated 2 pole 3 pole 12 pole Partition plate with marking facility yellow Single cover with marking facility yellow Cover strip for PCB terminal 24 pole with warning symbol 24 pole Connection rail L = 0,4 m for connection to power block (blue) and indicator Type Part No. VB WK 2,5-2 IVB WK 2,5-3 IVB WK 2,5-12 TS 2,5 GELB AD VB 2,5 GELB Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 07.311.2053.8 04.326.2053.8 04.343.9056.8 04.343.9156.8 05.561.4115.0 Std. Pack 10 10 10 10 10 10 10 1 35 selos PLUG Distribution blocks with screw / push-on connection WK / 4-8 S / IW / U * Feed-through block with push-on connection for mounting on TS 35 * Push-on connectors 2.8 x 0,8 acc. to DIN 46247 Push-on connectors 6.3 x 0.8 acc. to DIN 46247 * Current carrying capability according to DIN 46249 Tab connector 2.8 10 A 6.3 20 A Description Type Part No. Feed-through block, gray WK/4-8 S/IW/U 57.504.6355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Cross connector with screws WK / 4-8 S / U * Feed-through block with push-on connection for mounting on TS 35 * Push-on connectors 2.8 x 0.8 acc. to DIN 46247 Push-on connectors 6.3 x 0.8 acc. to DIN 46247 * Current carrying capability according to DIN 46249 Tab connector 2.8 10 A 6.3 20 A * Feed-through block with push-on connection for mounting on TS 35 * Nominal cross section 4,0 mm2 * Push-on connectors 2.8 x 0.8 acc. to DIN 46247 Push-on connectors 6.3 x 0.8 acc. to DIN 46247 * Current carrying capability according to DIN 46249 Tab connector 2.8 10 A 6.3 20 A AP 3 S/IW 2 pole VB WK/...S/IW/U-2 3 pole VB WK/...S/IW/U-3 up to 6 pole VB WK/...S/IW/U-6 UL 22 - 12 10 A 600 V1) Part No. Type Part No. WK/4-8 S/U 57.504.6255.0 22 - 12 10 A 300 V1) Std. Pack 50 10 10 10 Std. Pack 100 6 mm / 67 mm / 40 mm EMD IEC EN 60 947-7-1, EN 61 210 20 A 800 V1) 8 kV 3 Type AP 4 S 2 pole 9703/6-2 3 pole 9703/6-3 up to 6 pole 9703/6-6 UL 22 - 12 10 A 300 V1) Part No. Type Part No. Feed-through block, gray WK/3-6 S KO/U 57.504.7355.0 6 mm / 72 mm / 40 mm 9 mm EMD IEC EN 60 947-7-1, EN 61 210 0.5 - 4 mm2 0.5 - 4 mm2 20 A 690 V1) 8 kV 3 Type 9701 A/6 1 S KO TP 2 2 pole 2072/2 3 pole 2072/2 up to 6 pole 2072/6 CSA 22 - 12 10 A 300 V1) Std. Pack 07.311.4255.0 Z7.211.0227.0 Z7.211.0327.0 Z7.211.0627.0 Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data For use with insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree CSA 07.311.4355.0 Z7.281.3227.0 Z7.281.3327.0 Z7.281.3627.0 Feed-through block, gray Accessories End plate, gray Cross connector with screws 36 IEC EN 60 947-7-1, EN 61 210 Description Accessories End plate, gray Cross connector with screws WK / 3-6 S KO / U EMD Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 100 6 mm / 67 mm / 50 mm 20 A 800 V1) 8 kV 3 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack UL 22 - 12 10 A 300 V1) Part No. 07.310.5855.0 Z7.220.0227.0 Z7.220.0227.0 Z7.220.0627.0 10 50 50 50 Std. Pack 100 CSA 22 - 12 10 A 300 V1) Std. Pack 10 50 50 50 selos PLUG WK 4 3-6 S 1 K/U * Feed-through block with push-on connection for mounting on TS 35 * Nominal cross section 4 mm2 * Push-on connectors 2.8 x 0.8 acc. to DIN 46247 Push-on connectors 6.3 x 0.8 acc. to DIN 46247 * Current carrying capability according to DIN 46249 Tab connector 2.8 10 A 6.3 20 A Description Type Part No. Feed-through block, gray WK 4 3-6 S 1 K/U 57.504.3755.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Cross connector with screws WK / 5-10 S / U * Feed-through block with push-on connection for mounting on TS 35 * Push-on connectors 2.8 x 0.8 acc. to DIN 46247 Push-on connectors 6.3 x 0.8 acc. to DIN 46247 * Current carrying capability according to DIN 46249 Tab connector 2.8 10 A 6.3 20 A 6 mm / 52 mm / 48 mm 9 mm EMD IEC EN 60 947-7-1, EN 61 210 2 0.5 - 4 mm 0.5 - 6 mm2 UL 22 - 12 10 A 300 V1) 20 A 800 V1) 8 kV 3 Type Part No. AP4 3 S 1 K 2 pole IVB WK 4-2 3 pole IVB WK 4-3 up to 12 pole IVB WK 4-12 Type Part No. Feed-through block, gray WK/5-10 S/U 57.504.3655.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Cross connector with screws 100 CSA 22 - 12 10 A 300 V1) Std. Pack 07.311.3855.0 Z7.281.1227.0 Z7.281.1327.0 Z7.281.2227.0 Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack 10 10 10 10 Std. Pack 100 6 mm / 52 mm / 48 mm EMD IEC EN 60 947-7-1, EN 61 210 20 A 800 V1) 8 kV 3 UL 10 A 300 V1) Type Part No. AP 5 S 2 pole IVB WKI 4-2 3 pole IVB WKI 4-3 up to 12 pole IVB WKI 4-12 07.311.4655.0 Z7.271.4227.0 Z7.271.4327.0 Z7.271.5227.0 CSA 22 - 12 10 A 300 V1) Std. Pack 10 10 10 10 Accessories for selos WK/... Accessories Partition plate with marking facility Single cover with marking facility Insulating sleeve for tab connector for H0. V-K 1.5 mm2 for H0. V-K 2.5 mm2 1) Type Part No. Std. Pack yellow TS 4 GELB yellow AD VB 4 GELB 07.311.2153.8 04.326.2153.8 10 10 yellow yellow 05.592.7553.0 05.592.7653.0 2000 2000 Rating for use with insulating sleeves 37 selos Function blocks with screw connection 9786 U / 12 * Function block with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Description Type Part No. Function block empty with bridge rectifier B380 C1500 with optocoupler CNY 17 / 3 9786 U/12 9786 U/12 G4 9786 U/12 OPK 57.904.2055.0 57.904.2555.0 57.904.2855.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data IEC EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 2.5 mm2 * Compensating terminal with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2.5 mm2 Resistor range: 0.25 up to 100 Resistor tolerance: 10% Resistor range: 100 up to 50 k Resistor tolerance 20% Limite continuous resistance value: 0.75 W up to 70 C Max. load: 100 mA Temperature coefficient: 0 up to +500 ppm/ C Max. operating voltage: 300 V 9786 U / TSK... * Thermocouple terminal with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 2,5 mm2 Compensating terminal, gray with potentiometer as voltage divider 10 20 50 100 200 510 1 k 2 k 5 k 10 k 20 k 50 k 10 20 50 100 200 510 1 k 2 k 5 k 10 k 20 k 50 k Type Part No. 9785 U/10 9785 U/20 9785 U/50 9785 U/100 9785 U/200 9785 U/500 9785 U/1 k 9785 U/2 k 9785 U/5 k 9785 U/10 k 9785 U/20 k 9785 U/50 k 9785 U/10 -SPT 9785 U/20 -SPT 9785 U/50 -SPT 9785 U/100 -SPT 9785 U/200 -SPT 9785 U/500 -SPT 9785 U/1 k-SPT 9785 U/2 k-SPT 9785 U/5 k-SPT 9785 U/10 k-SPT 9785 U/20 k-SPT 9785 U/50 k-SPT 57.904.0055.0 57.904.0155.0 57.904.0255.0 57.904.0355.0 57.904.0455.0 57.904.0555.0 57.904.0655.0 57.904.0755.0 57.904.0855.0 57.904.0955.0 57.904.1055.0 57.904.1155.0 57.904.3955.0 57.904.4155.0 57.904.4255.0 57.904.4355.0 57.904.4455.0 57.904.4555.0 57.904.4655.0 57.904.4755.0 57.904.4855.0 57.904.4955.0 57.904.5055.0 57.904.5155.0 12 mm / 49 mm / 58 mm 9 mm EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 2.5 mm2 Description Type Part No. Thermocouple terminal type T-Cu / CuNi 44 Thermocouple terminal type E-NiCr / CuNi 44 Thermocouple terminal type J-Fe / CuNi 44 Thermocouple terminal type K-NiCr / Ni Thermocouple terminal type R-PtRh 13 / Pt 9786 U/TSK Cu-CuNi 9786 U/TSK NiCr-CuNi 9786 U/TSK Fe-CuNi 9786 U/TSK NiCr-Ni 9786 U/TSK E-Cu-A-Cu 57.904.7355.0 57.904.7055.0 57.904.7155.0 57.904.7255.0 57.904.7455.0 Cross section fine-stranded Cross section solid/stranded Rated voltage Rated impulse voltage Pollution degree Example: Fe / constantan fully enclosed design Fe / CuNi 44 CSA 22 - 14 6A 300 V General/Technical data Width / length / height, incl. TS 7.5 Wire strip length Approvals Cross section fine-stranded Cross section solid/stranded General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 38 UL 24 A 800 V 8 kV 3 Description Compensating terminal, gray with potentiometer 50 50 50 12 mm / 52 mm / 58 mm 9 mm Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9785 U /... - SPT Std. Pack Std. Pack 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Std. Pack 50 50 50 50 50 12 mm / 52 mm / 58 mm 9 mm IEC EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 2.5 mm2 800 V 8 kV 3 UL CSA selos 9786 U / 12 * Ground disconnect with screw connection for mounting on TS 35 and TS 32 * Nominal cross section 6 mm2 Description 9.4.3.1. Ground faults. Ground faults in any control circuits must not result in unintentional startup, potentially hazardous motions or shutdown of the machine. Part No. Ground disconnect 24 - 48 Vu with LED 9760 U/8 TKE 48 110 - 220 Vu with indicator lamp 9760 U/8 TKE 220 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree EN 60 204 part 1 / DIN VDE 0113 part 1 "Fitting industrial machines with electrical equipment" Type Std. Pack 57.110.1655.0 57.110.1555.0 25 25 17,5 mm / 71 mm / 52 mm 9 mm IEC EN 60 947-7-1 2 1.0 - 10 mm 1.0 - 10 mm2 UL 30 A 24 - 48 V / 110 - 220 V 18 - 8 25 A 48 V / 220 V CSA 18 - 8 25 A 48 V / 220 V Ground Disconnect terminal with LED 24 - 48 Vu Normal operation a external status display lights up b green status display lights up c red ground-fault indicator lights up During normal operation the auxiliary circuit is connected to the functional ground and the green (24 - 48 V) or yellow (110 - 220 V) status display is illuminated. If a low resistance ground fault occurs, the line fuse will blow. Once the contact separator is open, you can replace the fuse. Ground fault The illumination of the red lamp alone indicates an ground fault. d external status display lights up e green status display lights up f After the fault had been rectified, the green (24 - 48 V) or yellow (110 - 220 V) display will also light up. The contacts should now be moved to the "on" position as a result of which the red lamp will go out. red ground-fault indicator lights up The illumination of the yellow or green lamp and external display indicates that the auxiliary circuit has been reconnected to the functional ground. Ground Disconnect terminal with Neon Lamp 110 - 220 Vu Normal operation g yellow status display lights up Ground fault h yellow indicator light not flashing 39 selos Instrument isolating terminal with screw connection Wieland Electric`s selos WKN 6 TK block offers a simple and effective DIN rail block solution for use in measuring circuits for current, voltage or energy. All circuits in everyday practice can be neatly implemented with the instrument isolating terminal and a few accessory parts. Only two blocks are needed for simple transformer circuits. The main focus during the development of this block was clear and simple handling as well as universal application. All switching states of the block and the converter circuit are clearly recognizable and the extensive accessory program is easy to use. The block and the accessories meet the requirements of protection against accidental finger touch as per BGV A2. Technical data as per EN 60947-7: Rated cross section: 6 mm Rated voltage: 400 V Rated current: Connection capacity: 57 A 0.5 - 10 mm Accessories Pos. Normal operation Disconnect point closed 4 3 Short circuit contact open 2 Measured value test Disconnect point open Short circuit contact open Current transformer short circuit 5 3 Disconnect point closed Short circuit contact closed 3 2 Relay test Disconnect point open 3 Short circuit contact closed 4 1 40 selos WKN 6 TK * Instrument isolating terminal for mounting on TS 35 * Nominal cross section 6 mm2 Description Type Part No. Instrument isolating terminal Feed-through block WKN6 TK WKN6 TK D 56.106.0055.0 56.106.0155.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKN 6 TK SF * Instrument isolating terminal with spring support for mounting on TS 35 * Nominal cross section 6 mm2 IEC EN 60 947-7-1 2 0.5 - 6 mm 0.5 - 10 mm2 UL CSA 57 A 500 V 6 kV 3 Type Part No. Instrument isolating terminal Feed-through block WKN6 TK SF WKN6 TK SFD 56.106.0755.0 56.106.0855.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 50 50 8 mm / 73 mm / 58 mm 12 mm Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack Std. Pack 50 50 8 mm / 73 mm / 58 mm 12 mm IEC EN 60 947-7-1 2 0.5 - 6 mm 0.5 - 10 mm2 EA TS 50-18 57 A 500 V 6 kV 3 25 A 500 V Accessories for selos WKN 6 TK... Accessories 1. End plate 2. Partition 3. Sliding short-circuit slide, insulated 4. Cross connector with screws, insulated 5. Test socket 6. Disconnect locking device Jumper comb for WKN 6 TK Type 2 mm APN 6 TK TW 6 TK 2 pole IVS WKN6 TK-2 3 pole IVS WKN6 TK-3 4 pole IVS WKN6 TK-4 2 pole IVB WKN6 TK-2 3 pole IVB WKN6 TK-3 4 pole IVB WKN6 TK-4 5 pole IVB WKN6 TK-5 6 pole IVB WKN6 TK-6 gray SBN 4 GRAU violet SBN 4 VIOLETT green SBN 4 GRUN yellow SBN 4 GELB blue SBN 4 BLAU SP WKN 6 TK 2 pole IVK WKN 6TK-2 3 pole IVK WKN 6TK-3 4 pole IVK WKN 6TK-4 5 pole IVK WKN 6TK-5 6 pole IVK WKN 6TK-6 Part No. 07.313.1755.0 07.312.0453.0 Z7.282.7229.0 Z7.282.7329.0 Z7.282.7429.0 Z7.282.6229.0 Z7.282.6329.0 Z7.282.6429.0 Z7.282.6529.0 Z7.282.6629.0 Z5.511.3553.0 Z5.511.3553.9 Z5.511.3553.7 Z5.511.3553.8 Z5.511.3553.6 05.566.6855.9 Z7.255.8227.0 Z7.255.8327.0 Z7.255.8427.0 Z7.255.8527.0 Z7.255.8627.0 Std. Pack 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 50 10 10 10 10 10 41 selos Instrument isolating terminal with screw connection WK6 TK Wieland Electric`s selos WK 6 TK block offers an optimal DIN rail block solution for all types of measuring circuits of current, voltage or energy. All circuits occurring during everyday practice can be implemented with the Instrument isolating terminal and a few accessories. Complete insulated selectable connecting links are available as standard, as are insulated test sockets in all conventional signal colors. Two additional jumpering facilities permit the installation of fixed cross connections (e.g., for internal distribution of the k point of converter circuits). Standard cross connectors in a wide variety of numbers of pins are available for this purpose. The jumpers are easy to disconnect so that you can skip over blocks. Technical data as per EN 60947-7: Rated cross section: 6 mm Rated voltage: 400 V Rated current: Connection capacity: 32 A 0.5 - 10 mm Accessories Pos. Normal operation 4 (yellow) Disconnect point closed 4 (green) Short circuit contact open 5 4 (violet) Measured value test Disconnect point open Short circuit contact open Current transformer short circuit 2 1 Disconnect point closed Short circuit contact closed Relay test 4 (gray) Disconnect point open 2 Short circuit contact closed 4 (blue) 3 42 selos WK6 TK/35 * Instrument isolating terminal for mounting on TS 35 * Nominal cross section 6 mm2 WK6 TK P3/35 * Instrument isolating terminal with mounted test sockets for mounting on TS 35 * Nominal cross section 6 mm2 Description Type Part No. Instrument isolating terminal WK6 TK/35 56.106.0553.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data For use with insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 8 mm / 87 mm / 49 mm 12 mm MD IEC EN 60 947-7-1 2 0.5 - 6 mm 0.5 - 10 mm2 UL 20 - 8 45 A 600 V 32 A 400 V 6 kV 3 Type Part No. Instrument isolating terminal WK6 TK P3/35 56.106.0653.0 8 mm / 87 mm / 62 mm 12 mm MD IEC EN 60 947-7-1 0.5 - 6 mm2 0.5 - 10 mm2 UL 20 - 8 45 A 600 V 32 A 400 V 6 kV 3 50 CSA 20 - 8 45 A 300 V Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data For use with insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Std. Pack Std. Pack 50 CSA 20 - 8 45 A 300 V Accessories for selos WK6 TK.../35 Accessories 1. Partition 2. Sliding short-circuit slide, insulated 3. Cross connector with screws, insulated 4. Test socket 5. Disconnect locking device 2 pole 3 pole 4 pole 2 pole 3 pole 4 pole 5 pole 10 pole gray violet green yellow blue Type Part No. TW 6 TK IVS WK6 TK-2 IVS WK6 TK-3 IVS WK6 TK-4 IVB WK6 TK-2 IVB WK6 TK-3 IVB WK6 TK-4 IVB WK6 TK-5 IVB WK6 TK-10 SB 4 GRAU SB 4 VIOLETT SB 4 GRUN SB 4 GELB SB 4 BLAU SP WK6 TK 07.312.0453.0 Z7.212.2227.0 Z7.212.2327.0 Z7.212.2427.0 Z7.212.1227.0 Z7.212.1327.0 Z7.212.1427.0 Z7.212.1527.0 Z7.212.2027.0 05.511.2953.0 05.511.2953.9 05.511.2953.7 05.511.2953.8 05.511.2953.6 05.563.5453.0 Std. Pack 10 50 50 50 50 50 50 50 50 10 10 10 10 10 50 43 selos Screw type terminal blocks with spring support WKN 6 SF * Feed-through block with spring support for mounting on TS 35 and TS 32 * Nominal cross section 6 mm2 Description Type Part No. Feed-through block, gray WKN 6 SF 57.506.0555.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data WKN 10 SF * Feed-through block with spring support for mounting on TS 35 and TS 32 * Nominal cross section 10 mm2 EA TS 50-18 41 A 800 V 8 kV 3 30 A 500 V Accessories End plate, gray Partition, gray Cross connector with screws insulated Type Part No. 2 pole 3 pole up to 12 pole Single cover f. cross conn. with marking facility Cover with warning symbol yellow APN 6 SF TW 6 TK IVB WK 6 - 2 IVB WK 6 - 3 IVB WK 6 - 12 AD VB 6 GELB AD VB 8/4 GELB 07.313.2355.0 07.312.0453.0 Z7.282.2227.0 Z7.282.2327.0 Z7.282.3227.0 04.326.2253.8 04.343.4956.8 Description Type Part No. Feed-through block, gray WKN 10 SF 57.510.0555.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray Cross connector with screws insulated 2 pole 3 pole up to 12 pole Single cover f. cross conn. with marking facility Cover with warning symbol yellow 44 100 8 mm / 54 mm / 57 mm 11 mm IEC EN 60 947-7-1 0.5 - 6 mm 0.5 - 10 mm Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Std. Pack Std. Pack 10 10 10 10 10 10 10 Std. Pack 100 10 mm / 55 mm / 64 mm 13 mm IEC EN 60 947-7-1 2.5 - 10 mm2 1.5 - 16 mm2 EA TS 50-18 57 A 800 V 8 kV 3 30 A 500 V Type Part No. APN 10 SF TW 6 TK IVB WK 10 - 2 IVB WK 10 - 3 IVB WK 10 - 12 AD VB 10 GELB AD VB 10/4 GELB 07.313.2455.0 07.312.0453.0 Z7.283.2227.0 Z7.283.2327.0 Z7.283.3227.0 04.326.2353.8 04.343.5056.8 Std. Pack 10 10 10 10 10 10 10 selos DIN rail terminal blocks with ring lug connection WRT 6 * Feed-through block with ring lug connection for mounting on TS 35 * Nominal cross section 6 mm2 Description Type Part No. Feed-through block, gray WRT 6 57.106.1155.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 11 mm / 49 mm / 51 mm 10 mm a IEC EN 60 947-7-1 2 1.5 - 6 mm 1.5 - 6 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray Cross connector, insulated WRT 6 TK * Instrument isolating terminal with ring lug connection for mounting on TS 35 * Nominal cross section 6 mm2 41 A 1000 V 8 kV 3 Type APRT 6 TW 6 TK 2 pole IVB WRT 6 TK - 2 3 pole IVB WRT 6 TK - 3 4 pole IVB WRT 6 TK - 4 UL 22 - 8 50 A 600 V Part No. Type Part No. WRT 6 TK 57.106.1055.0 Accessories End plate, gray Partition, gray Cross connector, insulated 11 mm / 86 mm / 51 mm 10 mm a IEC EN 60 947-7-1 1.5 - 6 mm2 1.5 - 6 mm2 41 A 1000 V 8 kV 3 Type APRT 6 TW 6 TK 2 pole IVB WRT 6 TK - 2 3 pole IVB WRT 6 TK - 3 4 pole IVB WRT 6 TK - 4 CSA Std. Pack 07.300.6955.0 07.312.0453.0 Z7.250.5227.0 Z7.250.5327.0 Z7.250.5427.0 Instrument isolating terminal, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 100 22 - 8 50 A 600 V Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack UL 22 - 8 35 A 600 V Part No. 07.300.6955.0 07.312.0453.0 Z7.250.5227.0 Z7.250.5327.0 Z7.250.5427.0 10 10 10 10 10 Std. Pack 100 CSA 22 - 8 35 A 600 V Std. Pack 10 10 10 10 10 45 selos POWER LINE High current terminal blocks with screw connection selos POWER LINE is designed for use in mechanical and plant engineering, railway, and battery applications. Wieland offers a program which was especially developed for high current applications. The portfolio includes feed through blocks and ring lug terminals. The RFK type feed through blocks include four different cross sections between 95 and 240 mm with different types of connection (e.g., rising cage or ring lug connection). Ring lug terminals augment the selos POWER LINE product line. Blocks with ring lug sizes from M 6 to M 12 are available for the connection of wires with crimped cable lugs. Extensive accessories optimize the selos POWER LINE for a wide variety of applications. Technical data as per EN 60947-7: Rated cross section: 95 mm - 240 mm2 1000 V Rated voltage: High current blocks, type RFK Rated current: up to 415 A * Up to 240 mm rated cross section * Cable connection via ring lug connection technology, direct connection with rising cage or hybrid solutions * Current carrying and cross connectors made of E-Cu * Screws maintain torque via clamping body design, as well as lock washers Lug ring connection blocks * For the connection of cable lugs in versions from M 6 to M 12 * Screws maintain torque via lock washers * Approved for international rail transportation standards Accessories for selos POWER * Covers for provision of protection against accidental touch * Cross connectors made of E-Cu; 2, 3 and 4-pole * Partition plates for visual and electrical separation * All components can be marked with the standard Wieland marking system Mounting notice 46 * When tightening the block screws, we recommend countering by holding the wire to avoid deformation of the mounting rail and to keep the foot of the block free of torsional forces. selos BK M .../35 * Ring lug terminal for mounting on TS 35 Description Type Part No. Ring lug terminal BK M 6/35 BK M 8/35 BK M 10/35 BK M 12/35 32.530.0053.0 32.540.0053.0 32.550.0053.0 32.560.0053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories Partition Type Width Height Rated current BK M 6 19 mm 56 mm 125 A BK M 8 24 mm 65 mm 150 A BK M 10 35 mm 72 mm 265 A BK M 12 35 mm 74 mm 265 A POWER LINE for BK M 6 for BK M 8 for BK M 10 for BK M 12 Cross connector for tab connection blocks, from E-Cu for 2 blocks BK M 6 for 3 blocks BK M 6 for 2 blocks BK M 8 for 3 blocks BK M 8 for 2 blocks BK M 10 for 3 blocks BK M 10 for 2 blocks BK M 12 for 3 blocks BK M 12 Cover for BK M 6 for BK M 8 for BK M 10 for BK M 12 Installation clip for cover Std. Pack 25 25 25 25 XMD IEC UL CSA 1000 V 8 kV 31) 1) with partition TW BK Type Part No. TW BK M 6/35 TW BK M 8/35 TW BK M 10-12/35 TW BK M 10-12/35 07.340.3553.0 07.340.3653.0 07.340.3753.0 07.340.3753.0 Std. Pack 25 25 25 25 VB BK M 6/35-2 VB BK M 6/35-3 VB BK M 8/35-2 VB BK M 8/35-3 VB BK M 10/35-2 VB BK M 10/35-3 VB BK M 12/35-2 VB BK M 12/35-3 AD BK M 6-8/35 AD BK M 6-8/35 AD BK M 10-12/35 AD BK M 10-12/35 07.205.5227.0 07.205.5327.0 07.205.7227.0 07.205.7327.0 07.205.8227.0 07.205.8327.0 07.205.9227.0 07.205.9327.0 04.304.0181.0 04.304.0181.0 04.304.0281.0 04.304.0281.0 05.564.0753.0 20 10 20 10 20 10 20 10 1 1 1 1 10 Detailed drawing data on request. 47 selos POWER LINE High current blocks with screw connection RFK 1 / 95... S35 * High current block for mounting on TS 35 Description Configuration, gray F K FK FM FMK * Nominal cross section 95 mm2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data RFK 1 / 150... S35 * High current block for mounting on TS 35 56.395.0055.0 56.395.0155.0 56.395.0255.0 56.395.1055.0 56.395.1255.0 250 A 1000 V 8 kV 3 2.8 mm thick for 2 blocks for 3 blocks for 4 blocks Configuration, gray F K FK FMK * Nominal cross section 150 mm2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 48 RFK 1/95 F S 35 RFK 1/95 K S 35 RFK 1/95 FK S 35 RFK 1/95 FM S 35 RFK 1/95 FMK S 35 IEC EN 60 947-7-1 16 - 95 mm2 16 - 95 mm2 Description Accessories Cover for RFK 1 /..., yellow Partition / end plate Cross connector, from E-Cu Part No. Std. Pack 10 10 10 10 10 see list 27 mm EJTMD Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Cover for RFK 1 /..., yellow Partition / end plate Cross connector, from E-Cu Type 6-3/0 200 A 600 V Type Part No. TE/RFK 1/95 VB RFK 1/95/2/32 VB RFK 1/95/3/32 VB RFK 1/95/4/32 Z7.409.5753.0 07.340.0353.0 07.205.1227.0 07.205.1327.0 07.205.1427.0 Type Part No. RFK 1/150 F S35 RFK 1/150 K S35 RFK 1/150 FK S35 RFK 1/150 FMK S35 56.397.0055.0 56.397.0155.0 56.397.0255.0 56.397.1255.0 CSA 6-3/0 200 A 600 V Std. Pack 10 50 20 10 10 Std. Pack 10 10 10 10 see list 27 mm EJTMD IEC EN 60 947-7-1 70 - 150 mm2 70 - 150 mm2 335 A 1000 V 8 kV 3 2.8 mm thick for 2 blocks for 3 blocks for 4 blocks UL UL 0 - 300 MCM 275 A 600 V Type Part No. TE/RFK 1/150 - 240 PA VB RFK 1/185/2 VB RFK 1/185/3 VB RFK 1/185/4 Z7.409.5853.0 07.340.1053.0 07.201.4227.0 07.201.4327.0 07.201.4427.0 CSA 0 - 300 MCM 300 A 600 V Std. Pack 10 50 10 10 10 selos Description RFK 1 / 185... S35 * High current block for mounting on TS 35 Type General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data For use with insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Cover for RFK 1 /..., yellow Partition / end plate Cross connector, from E-Cu RFK 1 / 240... S35 * High current block for mounting on TS 35 Part No. F RFK 1/185 F S 35 FM RFK 1/185 FM S 35 Configuration, gray * Nominal cross section 185 mm2 POWER LINE Std. Pack 56.398.0055.0 56.398.1055.0 see list 27 mm EJTMD IEC EN 60 947-7-1 UL CSA 0 - 400 kcmil 375 A 600 V 353 A 1000 V 8 kV 3 0 - 400 kcmil 375 A 600 V Type Part No. TE/RFK 1/150 - 240 PA VB RFK 1/185/2 VB RFK 1/185/3 VB RFK 1/185/4 Z7.409.5853.0 07.340.1053.0 07.201.4227.0 07.201.4327.0 07.201.4427.0 Description Type Part No. Configuration, gray RFK 1/240 F S 35* RFK 1/240 K S 35 RFK 1/240 FK S 35*) RFK 1/240 FM S 35*) RFK 1/240 FMK S 35*) 2.8 mm thick for 2 blocks for 3 blocks for 4 blocks F K FK FM FMK * Nominal cross section 240 mm2 *) Use only cable lugs type DIN 46234 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data For use with insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Cover for RFK 1 /..., yellow Partition / end plate Cross connector, from E-Cu 10 10 Std. Pack Std. Pack 56.399.0055.0 56.399.0155.0 56.399.0255.0 56.399.1055.0 56.399.1255.0 ) 10 50 10 10 10 10 10 10 10 10 see list 27 mm EJTMD IEC EN 60 947-7-1 70 - 240 mm2 70 - 240 mm2 UL 0 - 500 kcmil 375 A 600 V 415 A 1000 V 8 kV 3 2.8 mm thick for 2 blocks for 3 blocks for 4 blocks CSA 3/0 - 500 kcmil 425 A 600 V Type Part No. TE/RFK 1/150 - 240 PA VB RFK 1/240/2 VB RFK 1/240/3 VB RFK 1/240/4 Z7.409.5853.0 07.340.1053.0 07.201.8227.0 07.201.8327.0 07.201.8427.0 Std. Pack 10 50 10 10 10 Configurations F K FK FM mm2 Type Screw Width mm Length mm Height, incl. TS 7,5 mm F M 10 32 92 55 95 FM M 10 32 92 65 K, FK, FMK M 10 32 92 78 F M 12 42 92 55 150 185 FMK 240 K, FK, FMK M 12 42 92 78 F M 12 42 92 55 FM M 12 42 92 70 F M 12 42 92 55 FM M 12 42 92 77 K, FK, FMK M 12 42 92 93 49 selos MINI Mini blocks with screw connection for TS 15 WKM 2,5 / 15 * Feed-through block for mounting on TS 15 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKM 2,5/15 WKM 2,5/15 BLAU 55.503.1053.0 55.503.1053.6 5 mm / 32 mm / 32 mm 9 mm NG8TMnD9 IEC UL EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 22 - 14 25 A 10 A 500 V 300 V 6 kV 3 KEMA 02 ATEX 2114 U ? CSA EN 60 079-0/-7 0.5 - 2.5 mm2 0.5 - 4 mm2 24 - 12 25 A 20 A 600 V 275 V General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate WKM 4 / 15 * Feed-through block for mounting on TS 15 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 2) with/without jumper * Ground block for mounting on TS 15 * Nominal cross section 4 mm 2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Type Part No. APM 2,5 - 4/15 APM 2,5 - 4/15 BLAU TWM 2,5 - 4/15 VB WKM 2,5/15-2 VB WKM 2,5/15-3 VB WKM 2,5/15-6 VB WKM 2,5/15 M60 AD VB 2,5/15 GELB TSM 2,5/15 07.311.0853.0 07.311.0853.6 07.311.1853.0 Z7.215.4227.0 Z7.215.4327.0 Z7.215.4627.0 Z7.215.4027.0 04.326.3053.8 07.311.2853.8 Description Type Part No. Feed-through block, gray Feed-through block, blue WKM 4/15 WKM 4/15 BLAU 55.504.1053.0 55.504.1053.6 6 mm / 32 mm / 32 mm 9 mm E8TMnD9 IEC UL EN 60 947-7-1 0.5 - 4 mm2 0.5 - 6 mm2 22 - 10 28 A 30 A 500 V 600 V 6 kV 3 KEMA 02 ATEX 2114 U ? CSA EN 60 079-0/-7 0.5 - 4 mm2 0.5 - 6 mm2 20 - 10 37 A 21/27 A2) 600 V 275 V Accessories End plate Type Part No. gray blue Partition gray Cross connector with screws, 2 pole E-Cu 3 pole up to 12 pole Single cover f. cross conn. with marking facility Partition plate with marking facility APM 2,5 - 4/15 APM 2,5 - 4/15 BLAU TWM 2,5 - 4/15 IVB WK 4 E/U-2 IVB WK 4 E/U-3 IVB WK 4 E/U-12 AD VB 4/15 GELB TSM 4/15 07.311.0853.0 07.311.0853.6 07.311.1853.0 Z7.271.2227.0 Z7.271.2327.0 Z7.271.3227.0 04.326.2953.8 07.311.2953.8 Description Type Part No. Ground block, green/yellow WKM 4 SL/15 55.504.9153.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate 50 100 100 gray blue Partition gray Cross connector with screws, 2 pole E-Cu 3 pole up to 6 pole 60 pole Single cover f. cross conn. with marking facility Partition plate with marking facility Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKM 4 SL / 15 Std. Pack 6 mm / 32 mm / 32 mm 9 mm E8TMnD9 IEC UL EN 60 947-7-2 0.5 - 4 mm2 0.5 - 6 mm2 22 - 14 30 A 500 V 300 V 6 kV 3 Std. Pack 10 10 10 50 50 50 10 10 10 Std. Pack 100 100 Std. Pack 10 10 10 10 10 10 10 10 Std. Pack 100 KEMA 02 ATEX 2114 U ? CSA EN 60 079-0/-7 0.5 - 4 mm2 0.5 - 6 mm2 22 - 10 Type Part No. APM 4 SL/15 07.311.0753.0 Std. Pack 10 selos MINI WKM 2,5 F1 / 15 * Feed-through block with solder connection for mounting on TS 15 * Nominal cross section 2.5 mm2 * The terminal blocks of series WKM 2,5 F1 / 15 and WKM 2,5 F2 / 15 must be mounted alternately in order to maintain the required air and creepage distances for the indicated rated voltage. Description Type Part No. Feed-through block, gray WKM 2,5 F1/15 55.503.1253.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Cross connector with screws, E-Cu gray 2 pole 3 pole up to 6 pole 60 pole Single cover f. cross conn. with marking facility Partition plate with marking facility yellow WKM 2,5 F2 / 15 * Feed-through block solder connection for mounting on TS 15 * Nominal cross section 2.5 mm2 * The terminal blocks of series WKM 2,5 F1 / 15 and WKM 2,5 F2 / 15 must be mounted alternately in order to maintain the required air and creepage distances for the indicated rated voltage. 5 mm / 32 mm / 32 mm 9 mm G IEC UL EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 CSA Type Part No. APM 2,5 F./15 VB WKM 2,5/15-2 VB WKM 2,5/15-3 VB WKM 2,5/15-6 VB WKM 2,5/15 M60 AD VB 2,5/15 GELB TSM 2,5/15 07.311.0653.0 Z7.215.4227.0 Z7.215.4327.0 Z7.215.4627.0 Z7.215.4027.0 04.326.3053.8 07.311.2853.8 Description Type Part No. WKM 2,5 F2/15 55.503.1353.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Cross connector with screws, E-Cu gray 2 pole 3 pole up to 6 pole 60 pole Single cover f. cross conn. with marking facility Partition plate with marking facility yellow 100 ? 24 A 500 V 6 kV 3 Feed-through block, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack Std. Pack 10 50 50 50 10 10 10 Std. Pack 100 5 mm / 32 mm / 32 mm 9 mm IEC EN 60 947-7-1 0.5 - 2.5 mm2 0.5 - 4 mm2 UL CSA ? 24 A 500 V 6 kV 3 Type Part No. APM 2,5 F./15 VB WKM 2,5/15-2 VB WKM 2,5/15-3 VB WKM 2,5/15-6 VB WKM 2,5/15 M60 AD VB 2,5/15 GELB TSM 2,5/15 07.311.0653.0 Z7.215.4227.0 Z7.215.4327.0 Z7.215.4627.0 Z7.215.4027.0 04.326.3053.8 07.311.2853.8 Std. Pack 10 50 50 50 10 10 10 51 selos CLASSIC LINE DIN rail terminal blocks with screw connection, type 9700 A.. S35 DIN rail terminal blocks with screw connection - selos CLASSIC The selos CLASSIC series offers the highest-quality connecting technology. Thanks to its unique clamping body design, aluminum or copper wire connections are long lasting and maintenance-free. The product line includes feed-through and ground blocks for wires up to 50 mm2. High-quality screw connection technology * Steel free clamping body - Increased corrosion resistance - Extruded clamping body, nickel-plated brass * Low contact resistance - Clamping body has similar physical and chemical characteristics as the conductor - One piece clamping body/current bar Connection of aluminum wires possible The following always applies when connecting aluminium wires in the selos CLASSIC LINE: * After being stripped, the ends of the wires must be cleaned with a brush and then coated with acid-free grease to prevent further oxidation. * The terminal should be tightened to approx. 20 % higher torque than what is stated for the clamping screw. With this type of terminal, it is not necessary to retighten the clamping screws. Wide connection range * Connection range 0.5 - 50 mm2 Solid, fine-stranded and stranded wires can be connected to the terminal blocks of selos CLASSIC LINE without ferrules, as all block sizes have wire protection. Compact design * Save space on the rail - selos CLASSIC LINE offers higher density due to the wire size and terminal block pitch: Connection range 2,5 mm2 4 mm2 10 mm2 16 mm2 25 mm2 35 mm2 52 Pitch 5 mm 6 mm 8 mm 10 mm 12 mm 16 mm selos CLASSIC LINE Feed-through blocks with screw connection, type 9700 A.. S35 9700 A/5 S35 * Feed-through block for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/5 S35 9700 A/5 S35 BLAU 54.003.7553.0 54.003.7553.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Ratings for use of insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9700 A/6 S35 * Feed-through block for mounting on TS 35 * Nominal cross section 4 mm2 5 mm / 47 mm / 38 mm 9 mm EMD IEC EN 60 947-7-1 2 0.5 - 2.5 mm 0.5 - 4 mm2 24 A 800 V 8 kV 3 UL 18 - 12 20/30 A 600 V Accessories End plate, gray Partition, gray Cross connector with screws, E-Cu, uninsulated Type Part No. 9701/6 9702/6 9703/5-2 9703/5-3 9703/5-4 9703/5-5 9703/5-6 9703/5-M 2 pole 3 pole 4 pole 5 pole 6 pole Cut-to-order strip 0,6 m long 2-pole switchable jumper Adapter for test plug 9011 D Cover with warn. symbol for 1 block yellow 07.310.3153.0 07.310.3453.0 Z7.215.0227.0 Z7.215.0327.0 Z7.215.0427.0 Z7.215.0527.0 Z7.215.0627.0 Z7.215.0027.0 Z7.269.3523.0 05.508.8921.0 04.325.1656.0 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/6 S35 9700 A/6 S35 BLAU 54.004.7553.0 54.004.7553.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Ratings for use of insulating sleeves Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray Cross connector with screws, E-Cu, uninsulated 6 mm / 47 mm / 38 mm 9 mm EMD IEC EN 60 947-7-1 2 0.5 - 4 mm 0.5 - 6 mm2 32 A 800 V 8 kV 3 UL 18 - 10 30/30 A 600 V Type Part No. 9701/6 9702/6 9703/6-2 9703/6-3 9703/6-4 9703/6-5 9703/6-6 9703/6-M 07.310.3153.0 07.310.3453.0 Z7.211.0227.0 Z7.211.0327.0 Z7.211.0427.0 Z7.211.0527.0 Z7.211.0627.0 Z7.211.0027.0 Z7.269.2923.0 05.508.8821.0 04.325.1056.0 2 pole 3 pole 4 pole 5 pole 6 pole Cut-to-order strip 0,6 m long 2-pole switchable jumper Adapter for test plug 9011 C Cover with warn. symbol for 1 block yellow Std. Pack 100 100 CSA 22 - 12 25 A 600 V Std. Pack 10 10 50 50 50 50 50 10 50 10 10 Std. Pack 100 100 CSA 22 - 10 35 A 600 V Std. Pack 10 10 50 50 50 50 50 10 50 10 10 53 selos CLASSIC LINE Feed-through blocks with screw connection, type 9700 A.. S35 9700 A/8 S35 * Feed-through block for mounting on TS 35 * Nominal cross section 16 mm2 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/8 S 35 9700 A/8 S 35 BLAU 54.010.7553.0 54.010.7553.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 8 mm / 47 mm / 48 mm 12 mm EMD IEC EN 60 947-7-1 2 1 - 10 mm 1 - 10 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector with screws, E-Cu, uninsulated 9700 A/10 S35 * Feed-through block for mounting on TS 35 * Nominal cross section 16 mm2 57 A 800 V 8 kV 3 18 - 8 50/50 A 600 V Type Part No. 9701/8 9702/8 9703/8-2 9703/8-3 9703/8-4 9703/8-5 9703/8-6 2-pole switchable jumper Adapter for test plug 9011 B Cover with warn. symbol for 1 block yellow Rapid mounting tool 07.310.3253.0 07.310.3553.0 Z7.212.0227.0 Z7.212.0327.0 Z7.212.0427.0 Z7.212.0527.0 Z7.212.0627.0 Z7.269.3023.0 05.508.3221.0 04.325.1156.0 05.593.5953.0 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/10 S 35 9700 A/10 S 35 BLAU 54.016.7553.0 54.016.7553.6 gray gray 2 pole 3 pole 4 pole 5 pole 6 pole General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 10 mm / 49 mm / 51 mm 15 mm EMD IEC EN 60 947-7-1 2 1.5 - 16 mm 1.5 - 16 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector with screws, E-Cu, uninsulated 76 A 800 V 8 kV 3 gray gray 2 pole 3 pole 4 pole 5 pole 6 pole UL 18 - 6 65/70 A 600 V Type Part No. 9701/10 9702/10 9703/10-2 9703/10-3 9703/10-4 9703/10-5 9703/10-6 07.310.3953.0 07.310.4053.0 Z7.214.0227.0 Z7.214.0327.0 Z7.214.0427.0 Z7.214.0527.0 Z7.214.0627.0 Z7.269.3123.0 05.508.3121.0 04.325.1256.0 2-pole switchable jumper Adapter for test plug 9011 A Cover with warn. symbol for 1 block yellow 54 UL Std. Pack 100 100 CSA 18 - 8 55 A 600 V Std. Pack 10 10 50 50 50 50 50 50 10 10 10 Std. Pack 100 100 CSA 18 - 6 70 A 600 V Std. Pack 10 10 50 50 50 50 50 50 10 10 selos 9700 A/12 S35 * Feed-through block for mounting on TS 35 * Nominal cross section 25 mm2 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/12 S 35 9700 A/12 S 35 BLAU 54.025.7553.0 54.025.7553.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 12 mm / 59 mm / 58 mm 20 mm EMD IEC EN 60 947-7-1 2 2.5 - 25 mm 2.5 - 35 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector with screws, E-Cu, uninsulated 101 A 800 V 8 kV 3 * Feed-through block for mounting on TS 35 * Nominal cross section 35 mm2 UL 14 -4 85/100 A 600 V Type Part No. 9701/12 9702/12 9703/12-2 9703/12-3 9703/12-4 9703/12-5 9703/12-6 07.310.3353.0 07.310.3653.0 Z7.213.0227.0 Z7.213.0327.0 Z7.213.0427.0 Z7.213.0527.0 Z7.213.0627.0 Z7.269.3223.0 05.508.6521.0 04.325.1356.0 Description Type Part No. Feed-through block, gray Feed-through block, (Ex)i, blue 9700 A/16 S 35 9700 A/16 S 35 BLAU 54.035.7553.0 54.035.7553.6 gray gray 2 pole 3 pole 4 pole 5 pole 6 pole 2-pole switchable jumper Adapter for test plug Cover with warn. symbol for 1 block yellow 9700 A/16 S35 CLASSIC LINE General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 16 mm / 59 mm / 58 mm 20 mm EMD IEC EN 60 947-7-1 2 2,5 - 35 mm 2,5 - 50 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate Partition Cross connector with screws, E-Cu, uninsulated 125 A 800 V 8 kV 3 gray gray 2 pole 3 pole 4 pole 5 pole 6 pole 2-pole switchable jumper Adapter for test plug Cover with warn. symbol for 1 block yellow UL 6-2 115/130 A 600 V Type Part No. 9701/12 9702/12 9703/16-2 9703/16-3 9703/16-4 9703/16-5 9703/16-6 07.310.3353.0 07.310.3653.0 Z7.216.0227.0 Z7.216.0327.0 Z7.216.0427.0 Z7.216.0527.0 Z7.216.0627.0 Z7.269.3423.0 05.508.6521.0 04.325.1456.0 Std. Pack 50 50 CSA 14 - 4 100 A 600 V Std. Pack 10 10 50 50 50 50 50 50 10 10 Std. Pack 50 50 CSA 12 - 2 125 A 600 V Std. Pack 10 10 50 50 50 50 50 50 10 10 55 selos CLASSIC LINE Ground blocks with screw connection, Typ 9700 A.. S35 9700 A/6 SL2 S35 * Ground block for mounting on TS 35 Description Type Part No. Ground block, green-yellow 9700 A/6 SL 2 S 35 56.004.9053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Nominal cross section 4 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9700 A/8 SL2 S35 * Ground block for mounting on TS 35 * Nominal cross section 10 mm2 * Ground block for mounting on TS 35 * Nominal cross section 16 mm 2 CSA 22 - 10 800 V 8 kV 3 600 V 600 V Accessories End plate, green Type Part No. 9701/6 SL 07.312.0053.0 Description Type Part No. Ground block, green-yellow 9700 A/8 SL 2 S 35 56.010.9053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 8 mm / 53 mm / 48 mm 11 mm EMD IEC EN 60 947-7-2 0.5 - 10 mm2 0.5 - 10 mm2 UL Std. Pack 10 Std. Pack 100 CSA 18 - 8 18 - 8 800 V 8 kV 3 600 V 600 V Accessories End plate, green Type Part No. 9701/8 SL 07.312.0153.0 Description Type Part No. Ground block, green-yellow 9700 A/10 SL 2 S 35 56.016.9053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, green 56 UL 100 18 - 10 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9700 A/10 SL2 S35 6 mm / 48 mm / 38 mm 9 mm EMD IEC EN 60 947-7-2 2 0.5 - 4 mm 0.5 - 6 mm2 Std. Pack 10 mm / 53 mm / 51 mm 16 mm EMD IEC EN 60 947-7-2 1.5 - 16 mm2 1.5 - 16 mm2 UL Std. Pack 10 Std. Pack 50 CSA 18 - 6 16 - 6 800 V 8 kV 3 600 V 600 V Type Part No. 9701/10 SL 07.312.0253.0 Std. Pack 10 selos 9700 A/16 SL2 S35 * Ground block for mounting on TS 35 * Nominal cross section 35 mm2 CLASSIC LINE Description Type Part No. Ground block, green-yellow 9700 A/16 SL 2 S 35 56.035.9053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, green 16 mm / 53 mm / 58 mm 18 mm EMD IEC EN 60 947-7-2 2 2.5 - 35 mm 2.5 - 50 mm2 UL Std. Pack 50 CSA 12 - 2 12 - 2 800 V 8 kV 3 600 V 600 V Type Part No. 9701/16 SL 07.312.0353.0 Std. Pack 10 57 fasis 58 fasis fasis WKFN - DIN Rail Terminal Blocks with Tension Spring Connection The DIN rail terminal block with tension spring technology: fasis WKFN is easy to operate, saves time and costs during wiring and reduces inventory costs, and guarantees vibrationproof and maintenance-free connections with high contact forces. The product line includes feed-through and ground blocks with 2, 3 or 4 termination point as well as multi-tier blocks in two- and three-tier designs, knife-edge disconnect blocks in one- and two-tier designs and fuse blocks. In addition, specialty function blocks are available with application-specific diode circuits. fasis WKFN has been designed for use in machinery and plant construction as well as hazardous locations subject to explosion. Connection cross-sections up to 35 mm Rated current of up to 125 A Rated voltage of up to 1000 V 59 fasis DIN rail terminal blocks with tension spring connection The terminals * Secure and maintenance-free tension spring connection * High quality, dynamic contact technology with steel spring and copper current carrying bar * Easy to wire front connection * Connection of fine-stranded wires with and without wire ferrules * Simple operation with a standard screwdriver * Screwdriver is held securely in the terminal for optimal handling while connecting wires The system * Compact design for wiring in confined spaces (to 35 mm) * Plug-in system provides a Plug & Play solution in the control cabinet - fasis CON * Plug-in jumper bars * Screwless, snap-on ground terminal * Function check via modular test adapter through test point in the jumpering channel * Integrated test jacks in all blocks * Many labeling options 60 fasis Wieland jumpering system - Perfect technology Perfect technology Copper Steel * Copper current bar guarantees low contact resistance * Steel spring guarantees strength, durability, and long-term stability Extremely rugged! * Indestructible steel spring * Vibration-proof connection Simple customization * Individual poles easy to remove * Circuits easy to identify Wieland marking system - Reliable identification Marking strips - Dependable * Maximum hold to the terminal Marking tags - Individual * Solidify integrity of the assembly * Individual labeling with minimum effort * Ideal for service and maintenance The accessories * Wire entry guide strips for secure connection of wires smaller than 1 mm * Snap-on covers with warning symbols * Wieland screwdriver for optimal operation of spring tension terminals 61 fasis Feed-through blocks with tension spring connection WKF 1,5/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKF 1,5/35 WKF 1,5/35 BLAU 56.702.0053.0 56.702.0053.6 4 mm / 49 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-1 2 0.08 - 1.5 mm 0.08 - 1.5 mm2 26 - 14 15 A 17.5 A 500 V 300 V 6 kV 3 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 15 A 17.5/16.5 A3) 300 V 440 V*) Accessories End plate, gray Partition, gray Type Part No. APF 1,5 TWF 1,5 07.312.8153.0 07.312.8253.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKF 1,5 D1/2/35 WKF 1,5 D1/2/35 BLAU 56.702.5053.0 56.702.5053.6 4 mm / 60 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-1 2 0.08 - 1.5 mm 0.08 - 1.5 mm2 26 - 14 15 A 17.5 A 500 V 300 V 6 kV 3 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 15 A 17.5/16.5 A3) 300 V 440 V*) Accessories End plate, gray Segment end plate, gray Partition, gray Type Part No. APF 1,5 D1/2 SAPF 1,5 TWF 1,5 D1/2 07.312.8353.0 07.312.8953.0 07.312.8453.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKF 1,5 D2/2/35 WKF 1,5 D2/2/35 BLAU 56.702.5153.0 56.702.5153.6 4 mm / 72 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-1 0.08 - 1.5 mm2 0.08 - 1.5 mm2 26 - 14 15 A 17.5 A 500 V 300 V 6 kV 3 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 15 A 17.5/16.5 A3) 300 V 440 V*) Type Part No. APF 1,5 D2/2 SAPF 1,5 TWF 1,5 D2/2 07.312.8553.0 07.312.8953.0 07.312.8653.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 1,5 D1/2/35 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 1,5 D2/2/35 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Segment end plate, gray Partition, gray 62 Std. Pack 50 50 Std. Pack 10 10 Std. Pack 50 50 Std. Pack 10 10 10 Std. Pack 50 50 Std. Pack 10 10 10 fasis Accessories for fasis WKF 1,5... Accessories Cross connector, insulated 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 Cover with warning symbol over 5 blocks Screwdriver, uninsulated Type Part No. IVB WKF 1,5 - 2 IVB WKF 1,5 - 3 IVB WKF 1,5 - 4 IVB WKF 1,5 - 5 IVB WKF 1,5 - 10 IVB WKF 1,5 - 20 LEL 1,5/1 WEISS LEL 1,5/2 GRAU ADF 1,5/5 GELB DIN 5264 B 0,4x2,5 Z7.268.0227.0 Z7.268.0327.0 Z7.268.0427.0 Z7.268.0527.0 Z7.268.1027.0 Z7.268.2027.0 05.564.4253.0 05.564.4353.0 04.343.6953.8 06.502.4300.0 Std. Pack 10 10 10 10 10 10 10 10 10 5 *) For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are to be covered by partitions. 3) Rated current when using cross connectors 63 fasis Feed-through blocks with tension spring connection WKFN 2,5/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 2,5/35 WKFN 2,5/35 BLAU 56.703.0055.0 56.703.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 D1/2/35 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 24 - 12 24 A 600 V 22 A1) 550 V 1) Part No. APFN 2,5 APFN 2,5 BLAU TWFN 2,5 07.312.6755.0 07.312.6755.6 07.312.6855.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 2,5 D1/2/35 WKFN 2,5 D1/2/35 BLAU 56.703.5055.0 56.703.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 60 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-1-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 24 A 20 A 800 V 600 V 8 kV 3 CSA 24 - 12 24 A 600 V 22 A1) 550 V Part No. APFN 2,5 D1/2 APFN 2,5 D1/2 BLAU TWFN 2,5 D1/2 07.312.6955.0 07.312.6955.6 07.312.7055.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 2,5 D2/2/35 WKFN 2,5 D2/2/35 BLAU 56.703.5155.0 56.703.5155.6 Accessories End plate, gray End plate, blue Partition, gray 24 - 12 24 A 600 V 100 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Type CSA 10 10 10 Std. Pack 1) 5 mm / 72 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-1-1 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 24 A 20 A 800 V 600 V 8 kV 3 for 40 K and 45 K Std. Pack Accessories End plate, gray End plate, blue Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 64 CSA Accessories End plate, gray End plate, blue Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 D2/2/35 5 mm / 47 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-1-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 24 A 20 A 800 V 600 V 8 kV 3 Std. Pack for 40 K and 45 K Std. Pack 10 10 10 Std. Pack 100 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 22 A1) 550 V 1) Type Part No. APFN 2,5 D2/2 APFN 2,5 D2/2 BLAU TWFN 2,5 D2/2 07.312.7155.0 07.312.7155.6 07.312.7255.0 for 40 K and 45 K Std. Pack 10 10 10 fasis Supply block WKF 16/35 PV/WKFN * Supply block for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Power feed-in block, gray WKF 16/35 PV/WKFN 56.716.0353.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 12 mm / 82 mm / 48 mm 15 mm EJMD8 IEC UL EN 60 947-7-1 2 4 - 16 mm 4 - 16 mm2 24 - 4 76 A 75 A 800 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note CSA 12 - 4 78 A 600 V Std. Pack 20 KEMA 01 ATEX 2087 U ? EN 60 079-0/-7 4 - 16 mm2 4 - 16 mm2 64 A*) 690 V * Type-specific output currents upon request Accessories Cover with warning symbol over 4 blocks Screwdriver, uninsulated Type Part No. ADF 16/4 GELB DIN 5264 B 1,0x5,5 04.343.6653.8 06.502.4200.0 Std. Pack 10 5 - Potential distribution with standard cross connector IVB WKF 2.5... - Parallel connection of two cross connectors -> double jumpering Potentialdistribution - Potential distributions are possible on one or both sides Jumpering one side both sides single double single double 48 68 72 76 Imax Imax = In INblock Accessories for fasis WKFN 2,5... Accessories Cross connector, insulated 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 -20 LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 100 100 100 10 10 10 5 10 65 fasis Feed-through blocks with tension spring connection WKFN 4/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 4/35 WKFN 4/35 BLAU 56.704.0055.0 56.704.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 4 D1/2/35 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 24 - 10 32 A 600 V 28/30 A1) 690 V 1) Part No. APFN 4 APFN 4 BLAU TWFN 4 07.312.9255.0 07.312.9255.6 07.312.9355.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 4 D1/2/35 WKFN 4 D1/2/35 BLAU 56.704.5055.0 56.704.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 67 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-1 2 0.13 - 4 mm 0.13 - 6 mm2 24 - 10 32 A 30 A 800 V 600 V 8 kV 3 CSA 24 - 10 32 A 600 V 28/30 A1) 550 V Part No. APFN 4 D1/2 APFN 4 D1/2 BLAU TWFN 4 D1/2 07.312.9455.0 07.312.9455.6 07.312.9555.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 4 D2/2/35 WKFN 4 D2/2/35 BLAU 56.704.5155.0 56.704.5155.6 Accessories End plate, gray End plate, blue Partition, gray 24 - 10 32 A 600 V 100 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 Type CSA 10 10 10 Std. Pack 1) 6 mm / 82 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-1 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 32 A 30 A 800 V 600 V 8 kV 3 1. value at 40 K/ 2. value at 45 K Std. Pack Accessories End plate, gray End plate, blue Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 66 CSA Accessories End plate, gray End plate, blue Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 4 D2/2/35 6 mm / 51 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-1 2 0.13 - 4 mm 0.13 - 6 mm2 24 - 10 32 A 30 A 800 V 600 V 8 kV 3 Std. Pack 1. value at 40 K/ 2. value at 45 K Std. Pack 10 10 10 Std. Pack 100 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 28/30 A1) 550 V 1) Type Part No. APFN 4 D2/2 APFN 4 D2/2 BLAU TWFN 4 D2/2 07.312.9055.0 07.312.9055.6 07.312.9155.0 1. value at 40 K/ 2. value at 45 K Std. Pack 10 10 10 fasis WKF 16/35 PV/WKFN * Supply block for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Power feed-in block, gray WKF 16/35 PV/WKFN 56.716.0353.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 12 mm / 82 mm / 48 mm 15 mm EJMD8 IEC UL EN 60 947-7-1 2 4 - 16 mm 4 - 16 mm2 24 - 4 76 A 75 A 800 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note CSA 12 - 4 78 A 600 V Std. Pack 20 KEMA 01 ATEX 2087 U ? EN 60 079-0/-7 4 - 16 mm2 4 - 16 mm2 64 A* 690 V * Type-specific output currents upon request Accessories Cover with warning symbol over 4 blocks Screwdriver, uninsulated Type Part No. ADF 16/4 GELB DIN 5264 B 1,0x5,5 04.343.6653.8 06.502.4200.0 Std. Pack 10 5 - Potential distribution with standard cross connector IVB WKF 4... - Parallel connection of two cross connectors -> double jumpering Potential distribution - Potential distributions are possible on one or both sides Jumpering Imax one side both sides single double single double 64 76 76 76 Imax = In INblock Accessories for fasis WKFN 4... Accessories Cross connector, insulated 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. VB WKF 4 - 2 IVB WKF 4 - 3 IVB WKF 4 - 4 IVB WKF 4 - 5 IVB WKF 4 - 6 IVB WKF 4 - 7 IVB WKF 4 - 8 IVB WKF 4 - 9 IVB WKF 4 - 10 LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ ADF 4/4 GELB PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.2027.0 05.561.8553.0 05.561.8653.0 05.561.8753.0 04.343.6153.8 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 100 100 100 10 10 10 5 10 67 fasis Feed-through blocks with tension spring connection WKFN 6/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 6 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 6/35 WKFN 6/35 BLAU 56.706.0055.0 56.706.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 6 D1/2/35 * Duo-feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 6 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 8 mm / 66 mm / 45 mm 12 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 6 mm 1.5 - 10 mm2 24 - 8 41 A 50 A 800 V 600 V 8 kV 3 CSA 24 - 8 41 A 600 V Std. Pack PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 6 mm2 1.5 - 10 mm2 39/41 A* 550 V * 1. value at 40 K/ 2. value at 45 K Accessories End plate, gray End plate, blue Partition, gray Type Part No. APFN 6 APFN 6 BLAU TWFN 6 07.313.0455.0 07.313.0455.6 07.313.0555.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 6 D1/2/35 WKFN 6 D1/2/35 BLAU 56.706.5055.0 56.706.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories End plate, gray End plate, blue Partition, gray 100 100 8 mm / 90 mm / 45 mm 12 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 6 mm 1.5 - 10 mm2 24 - 8 41 A 50 A 800 V 600 V 8 kV 3 CSA 24 - 8 41 A 600 V Std. Pack 10 10 10 Std. Pack 100 100 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 6 mm2 1.5 - 10 mm2 39/41 A* 550 V * 1. value at 40 K/ 2. value at 45 K Type Part No. APFN 6 D1/2 APFN 6 D1/2 BLAU TWFN 6 D1/2 07.313.0655.0 07.313.0655.6 07.313.0755.0 Std. Pack 10 10 10 Accessories for fasis WKFN 6... Accessories Cross connector, insulated** Cover with warning symbol over 4 blocks Test plug Screwdriver, uninsulated 2 pole 3 pole 4 pole 5 pole yellow Type Part No. IVB WKFN 6 - 2 IVB WKFN 6 - 3 IVB WKFN 6 - 4 IVB WKFN 6 - 5 ADF 6/4 GELB ST 2/2,3 DIN 5264 B 0,8x 4 Z7.282.5227.0 Z7.282.5327.0 Z7.282.5427.0 Z7.282.5527.0 04.343.6253.8 Z5.553.2921.0 06.502.4100.0 Std. Pack 10 10 10 10 10 10 5 ** When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A. 68 fasis WKFN 10/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 10 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 3) Pls. note that the current must be reduced for EX applications. Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 10/35 WKFN 10/35 BLAU 56.710.0055.0 56.710.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 10 D1/2/35 * Duo-feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 10 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 3) Pls. note that the current must be reduced for EX applications. 10 mm / 72 mm / 50 mm 15 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 10 mm 1.5 - 16 mm2 16 - 6 57 A 60 A 800 V 600 V 8 kV 3 CSA 16 - 6 65 A 600 V Std. Pack PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 10 mm2 1.5 - 16 mm2 52/57 A* 550 V * 1. value at 40 K/ 2. value at 45 K Accessories End plate, gray End plate, blue Partition, gray Type Part No. APFN 10 APFN 10 BLAU TWFN 10 07.313.0855.0 07.313.0855.6 07.313.0955.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 10 D1/2/35 WKFN 10 D1/2/35 BLAU 56.710.5055.0 56.710.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories End plate, gray End plate, blue Partition, gray 50 50 10 mm / 98 mm / 50 mm 15 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 10 mm 1.5 - 16 mm2 16 - 6 57 A 60 A 1000 V 600 V 8 kV 3 CSA 16 - 6 65 A 600 V Std. Pack 10 10 10 Std. Pack 50 50 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 10 mm2 1.5 - 16 mm2 52/57 A* 550 V * 1. value at 40 K/ 2. value at 45 K Type Part No. APFN 10 D1/2 APFN 10 D1/2 BLAU TWFN 10 D1/2 07.313.1055.0 07.313.1055.6 07.313.1155.0 Std. Pack 10 10 10 Accessories for fasis WKFN 10... Accessories Cross connector, insulated** Reducing jumper, WKF 35 to WKFN 103) Cover with warning symbol over 4 blocks Test plug Screwdriver, uninsulated Type 2 pole IVB WKF 10 - 2 IVB WKFN 35R10 yellow ADF 10/4 GELB ST 2/2,3 DIN 5264 B 1x 5,5 Part No. Z7.283.8227.0 Z7.285.6427.0 04.343.6453.8 Z5.553.2921.0 06.502.4200.0 Std. Pack 10 10 10 10 5 ** When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced to 4 A/40 K or 5 A/45 K for type WKFN 10/35. 69 fasis Feed-through blocks with tension spring connection WKFN 16/35 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 16 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 16/35 WKFN 16/35 BLAU 56.716.0055.0 56.716.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 12 mm / 79 mm / 50 mm 16 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 16 mm 1.5 - 25 mm2 16 - 4 76 A 85 A 1000 V 600 V 8 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 16 D1/2/35 * Duo-feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 16 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Feed-through block with tension spring connection for mounting on TS 35 * Nominal cross section 35 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 16 mm2 1.5 - 25 mm2 74/76 A* 550 V Accessories End plate, gray End plate, blue Partition, gray Cross connector, insulated** 2 pole Cover with warning symbol for 4 blocks Type Part No. APFN 16 APFN 16 BLAU TWFN 16 IVB WKF 16 - 2 ADF 16/4 GELB 07.313.1255.0 07.313.1255.6 07.313.1355.0 Z7.284.4227.0 04.343.6653.8 Description Type Part No. Feed-through block, gray Feed-through block, blue WKFN 16 D1/2/35 WKFN 16 D1/2/35 BLAU 56.716.5055.0 56.716.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 12 mm / 107 mm / 50 mm 16 mm NMD IEC UL EN 60 947-7-1 2 0.2 - 16 mm 1.5 - 25 mm2 16 - 4 76 A 85 A 1000 V 600 V 8 kV 3 CSA 16 - 4 85 A 600 V Std. Pack 10 10 10 10 10 Std. Pack 50 100 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 16 mm2 1.5 - 25 mm2 74/76 A* 550 V * 1. value at 40 K/ 2. value at 45 K Accessories End plate, gray End plate, blue Partition, gray Cross connector, insulated** 2 pole Cover with warning symbol for 4 blocks Type Part No. APFN 16 D1/2 APFN 16 D1/2 BLAU TWFN 16 D1/2 IVB WKF 16 - 2 ADF 16/4 GELB 07.313.1455.0 07.313.1455.6 07.313.1555.0 Z7.284.4227.0 04.343.6653.8 Description Type Part No. Feed-through block, gray Feed-through block, blue WKF 35/35 WKF 35/35 BLAU 56.735.0053.0 56.735.0053.6 16 mm / 100 mm / 59 mm 18 mm 8aD IEC UL EN 60 947-7-1 2.5 - 35 mm2 2.5 - 35 mm2 12 - 2 125 A 115 A 800 V 600 V 8 kV 3 KEMA 03 ATEX 2057 U ? CSA EN 60 079-0/-7 2.5 - 35 mm2 2.5 - 35 mm2 12 - 2 115 A 92/108 A1) 600 V 690 V General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories Cross connector, insulated 70 16 - 4 85 A 600 V 50 100 * 1. value at 40 K/ 2. value at 45 K Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKF 35/35 CSA Std. Pack Std. Pack Std. Pack 1) Type 2 pole IVB WKF 35-2 10 10 10 10 10 Part No. Z7.285.6227.0 10 10 with/without jumper Std. Pack 10 fasis Potential supply with feed-through blocks up to 35 mm2 Imax E: Imax. supply Imax R: Ireducing cross connector IN-A: IN output terminal blocks Potential distribution 35-R-10 Imax. supply Ireducing cross connector IN output terminal blocks Potential distribution 35 R 10 * Potential supply 35 mm2 * Reducing cross connector 35R10 * Potential output 10 mm2 Distribution on one side Distribution on both sides 2 poles several poles 2 poles 125 A 125 A 125 A several poles 125 A 57 A 105 A 57 A 105 A 57 A 57 A 57 A 57 A Function Type Part No. Supply block, gray Supply block, gray WKF 35 /35 WKF 35 /35 BLAU 56.735.0053.0 56.735.0053.6 Reducing cross connector2) IVB WKFN 35R10 Z7.285.6427.0 10 Output block, gray Output block, blue Output block, gray Output block, blue WKFN 10 /35 WKFN 10 /35 BLAU WKFN 10 D1/2/35 WKFN 10 D1/2/35 BLAU 56.710.0055.0 56.710.0055.6 56.710.5055.0 56.710.5055.6 10 10 10 10 2) Std. Pack 10 10 When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced (values to be requested) Accessories for fasis WKFN 16... and WKF 35 Accessories Test plug Screwdriver, uninsulated Type Part No. ST 2/2,3 DIN 5264 B 1x 5,5 Z5.553.2921.0 06.502.4200.0 Std. Pack 10 5 ** When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A. 71 fasis Ground blocks with tension spring connection WKF 1,5 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKF 1,5 SL/35 56.702.9053.0 4 mm / 49 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-2 2 0.08 - 1.5 mm 0.08 - 1.5 mm2 24 - 14 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 24 - 14 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 1,5 D1/2/SL/35 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 300 V 300 V 50 440 V* Accessories End plate, gray Partition, gray Type Part No. APF 1,5 TWF 1,5 07.312.8153.0 07.312.8253.0 Description Type Part No. Ground block, green/yellow WKF 1,5 D1/2/SL/35 56.702.9353.0 4 mm / 60 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-2 0.08 - 1.5 mm2 0.08 - 1.5 mm2 24 - 14 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 24 - 14 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 1,5 D2/2/SL/35 500 V 6 kV 3 Std. Pack 500 V 6 kV 3 300 V 300 V Std. Pack 10 10 Std. Pack 50 440 V* Accessories End plate, gray Segment end plate Partition, gray Type Part No. APF 1,5 D1/2 SAPF 1,5 TWF 1,5 D1/2 07.312.8353.0 07.312.8953.0 07.312.8453.0 Description Type Part No. Ground block, green/yellow WKF 1,5 D2/2/SL/35 56.702.9153.0 4 mm / 72 mm / 37 mm 10 mm 8aD IEC UL EN 60 947-7-2 2 0.08 - 1.5 mm 0.08 - 1.5 mm2 24 - 14 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 24 - 14 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Segment end plate Partition, gray 500 V 6 kV 3 300 V 300 V Std. Pack 10 10 10 Std. Pack 50 440 V* Type Part No. APF 1,5 D2/2 SAPF 1,5 TWF 1,5 D2/2 07.312.8553.0 07.312.8953.0 07.312.8653.0 Std. Pack 10 10 10 Accessories for fasis WKF 1.5... Accessories Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 Cover with warning symbol over 5 blocks yellow Screwdriver, uninsulated Type Part No. LEL 1,5/1 WEISS LEL 1,5/2 GRAU ADF 1,5/5 GELB DIN 5264 B 0,4x2,5 05.564.4253.0 05.564.4353.0 04.343.6953.8 06.502.4300.0 Std. Pack * In order to maintain the proper isolation distances, the open side of a ground block is to be covered by an end plate. 72 100 100 10 5 fasis WKFN 2,5 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKFN 2,5 SL/35 56.703.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 D1/2/SL/35 * Duo-Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 800 V 8 kV 3 600 V CSA 24 - 12 600 V Type Part No. APFN 2,5 07.312.6755.0 Description Type Part No. Ground block, green/yellow WKFN 2,5 D1/2/SL/35 56.703.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 60 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 800 V 8 kV 3 600 V CSA Std. Pack 24 - 12 600 V Part No. APFN 2,5 D1/2 07.312.6955.0 Description Type Part No. Ground block, green/yellow WKFN 2,5 D2/2/SL/35 56.703.9155.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray 800 V 8 kV 3 600 V 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Type 5 mm / 72 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 10 Std. Pack Accessories End plate, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Accessories End plate, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 D2/2/SL/35 5 mm / 47 mm / 38 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 Std. Pack CSA Std. Pack 10 Std. Pack 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 24 - 12 600 V Type Part No. APFN 2,5 D2/2 07.312.7155.0 Std. Pack 10 Accessories for fasis WKFN 2,5... Accessories Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 06.502.4000.0 06.502.5000.0 Std. Pack 100 100 100 10 5 10 73 fasis Ground blocks with tension spring connection WKFN 4 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKFN 4 SL/35 56.704.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 4 D1/2/SL/35 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 800 V 8 kV 3 600 V CSA 24 - 10 600 V Type Part No. APFN 4 07.312.9255.0 Description Type Part No. Ground block, green/yellow WKFN 4 D1/2/SL/35 56.704.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 67 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-2 2 0.13 - 4 mm 0.13 - 6 mm2 24 - 10 800 V 8 kV 3 600 V CSA Std. Pack 24 - 10 600 V Part No. APFN 4 D1/2 07.312.9455.0 Description Type Part No. Ground block, green/yellow WKFN 4 D2/2/SL/35 56.704.9155.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray 800 V 8 kV 3 600 V 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 Type 6 mm / 82 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-2 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 10 Std. Pack Accessories End plate, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 Accessories End plate, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 4 D2/2/SL/35 6 mm / 51 mm / 38 mm 11 mm NM IEC UL EN 60 947-7-2 2 0.13 - 4 mm 0.13 - 6 mm2 24 - 10 Std. Pack CSA Std. Pack 10 Std. Pack 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 24 - 10 600 V Type Part No. APFN 4 D2/2 07.312.9055.0 Std. Pack 10 Accessories for fasis WKFN 4... Accessories Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI 74 Type Part No. LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ ADF 4/4 GELB ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M 05.561.8553.0 05.561.8653.0 05.561.8753.0 04.343.6153.8 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 100 100 100 10 10 5 10 fasis WKFN 6 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 6 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKFN 6 SL/35 56.706.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 6 D1/2/SL/35 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 6 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 8 mm / 66 mm / 45 mm 12 mm NnD IEC UL EN 60 947-7-2 2 0.2 - 6 mm 1.5 - 10 mm2 24 - 8 800 V 8 kV 3 600 V CSA Std. Pack PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 6 mm2 1.5 - 10 mm2 24 - 8 600 V Accessories End plate, gray Type Part No. APFN 6 07.313.0455.0 Description Type Part No. Ground block, green/yellow WKFN 6 D1/2/SL/35 56.706.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray 8 mm / 90 mm / 45 mm 12 mm NnD IEC UL EN 60 947-7-2 2 0.2 - 6 mm 1.5 - 10 mm2 24 - 8 50 A 800 V 600 V 8 kV 3 100 CSA Std. Pack 10 Std. Pack 100 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 6 mm2 1.5 - 10 mm2 24 - 8 600 V Type Part No. APFN 6 D1/2 07.313.0655.0 Std. Pack 10 Accessories for fasis WKFN 6... Accessories Cross connector, insulated* Cover with warning symbol over 4 blocks Test plug Screwdriver, uninsulated 2 pole 3 pole 4 pole 5 pole yellow Type Part No. IVB WKFN 6 - 2 IVB WKFN 6 - 3 IVB WKFN 6 - 4 IVB WKFN 6 - 5 ADF 6/4 GELB ST 2/2,3 DIN 5264 B 0,8x 4 Z7.282.5227.0 Z7.282.5327.0 Z7.282.5427.0 Z7.282.5527.0 04.343.6253.8 Z5.553.2921.0 06.502.4100.0 Std. Pack 10 10 10 10 10 10 5 * When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A. 75 fasis Ground blocks with tension spring connection WKFN 10 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 10 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKFN 10 SL/35 56.710.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 10 D1/2/SL/35 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 10 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 16 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 600 V 16 - 6 600 V Part No. WKFN 10 SL/35 56.710.9055.0 Description Type Part No. Ground block, green/yellow WKFN 10 D1/2/SL/35 56.710.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 10 mm / 98 mm / 50 mm 15 mm NnD IEC UL EN 60 947-7-2 2 0.2 - 10 mm 1.5 - 16 mm2 CSA Std. Pack 50 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 10 mm2 1.5 - 16 mm2 16 - 6 600 V Accessories End plate, gray Type Part No. APFN 10 D1/2 07.313.1055.0 Description Type Part No. Ground block, green/yellow WKFN 16 SL/35 56.716.9055.0 Accessories End plate, gray 10 Std. Pack 1000 V 8 kV 3 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 10 mm2 1.5 - 16 mm2 Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 76 1000 V 8 kV 3 CSA Accessories End plate, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 16 SL/35 10 mm / 72 mm / 50 mm 15 mm NnD IEC UL EN 60 947-7-2 2 0.2 - 10 mm 1.5 - 16 mm2 16 - 6 Std. Pack 12 mm / 79 mm / 50 mm 16 mm NnD IEC UL EN 60 947-7-2 0.2 - 16 mm2 1.5 - 25 mm2 16 - 4 1000 V 8 kV 3 600 V CSA Std. Pack 10 Std. Pack 50 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 16 mm2 1.5 - 25 mm2 16 - 4 600 V Type Part No. APFN 16 07.313.1255.0 Std. Pack 10 fasis WKFN 16 D1/2/SL/35 * Duo ground block with tension spring connection for mounting on TS 35 * Nominal cross section 16 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Ground block, green/yellow WKFN 16 D1/2/SL/35 56.716.9355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 35 SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 35 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 12 mm / 107 mm / 50 mm 16 mm NnD IEC UL EN 60 947-7-2 2 0.2 - 16 mm 1.5 - 25 mm2 CSA Std. Pack 50 PTB 06 ATEX 1075 U ? EN 60 079-0/-7 0.2 - 16 mm2 1.5 - 25 mm2 16 - 4 1000 V 8 kV 3 600 V Accessories End plate, gray Type Part No. APFN 16 D1/2 07.313.1455. Description Type Part No. Ground block, green/yellow WKF 35 SL/35 56.735.9053.0 16 mm / 100 mm / 59 mm 18 mm 8aD IEC UL EN 60 947-7-1 2 2.5 - 35 mm 2.5 - 35 mm2 12 - 2 KEMA 03 ATEX 2057 U ? CSA EN 60 079-0/-7 2.5 - 35 mm2 2.5 - 35 mm2 12 - 2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Cross connector, insulated Cover with warning symbol over 4 blocks Test plug 800 V 8 kV 3 600 V Type 2 pole IVB WKF 35 - 2 ADF 35/5 GELB ST 2/2,3 600 V Std. Pack 10 Std. Pack 10 690 V Part No. Z7.285.6227.0 04.343.9253.8 Z5.553.2921.0 Std. Pack 10 10 10 Accessories for fasis WKFN 10 SL/... and WKFN 16 SL/... Accessories Test plug Screwdriver, uninsulated for WKFN 10 ... Cross connector, insulated** Cover with warning symbol over 4 blocks for WKFN 16 ... Cross connector, insulated* Cover with warning symbol over 4 blocks Type Part No. ST 2/2,3 DIN 5264 B 1x 5,5 Z5.553.2921.0 06.502.4200.0 Std. Pack 10 5 2 pole IVB WKF 10 - 2 yellow ADF 10/4 GELB Z7.283.8227.0 04.343.6453.8 10 10 2 pole IVB WKF 16 - 2 yellow ADF 16/4 GELB Z7.284.4227.0 04.343.6653.8 10 10 ** When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced to 4 A/40 K or 5 A/45 K for type WKFN 10/35. 77 fasis Multi-tier terminal blocks with tension spring connection WKF 1,5 E2/35 * Multi-tier block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray WKF 1,5 E2/35 56.702.7653.0 4 mm / 68 mm / 47 mm 10 mm 8aD IEC UL EN 60 947-7-1 2 0.08 - 1.5 mm 0.08 - 1.5 mm2 26 - 14 17,5 A 15 A 500 V 300 V 6 kV 3 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 15 A 15/13,5 A1) 300 V 440 V2) General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 1) 2) WKF 1,5 E2/VB/35 * Multi-tier block, vertically connected, with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 * Nominal cross section 1.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 Type Part No. WKF 1,5 E2/VB/35 56.702.6953.1 4 mm / 68 mm / 47 mm 10 mm 8aD IEC UL EN 60 947-7-1 0.08 - 1.5 mm2 0.08 - 1.5 mm2 26 - 14 17,5 A 15 A 500 V 300 V 6 kV 3 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 15 A 15/13,5 A1) 300 V 440 V2) General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 1) Std. Pack 50 Rated current when using cross connectors For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are to be covered by partitions. Description Type Part No. Multi-tier ground block, green/yellow WKF 1,5 E2/SL/35 56.702.9253.0 4 mm / 68 mm / 47 mm 10 mm 8aD IEC UL EN 60 947-7-2 0.08 - 1.5 mm2 0.08 - 1.5 mm2 26 - 14 KEMA 03 ATEX 2056 U ? CSA EN 60 079-0/-7 0.14 - 1.5 mm2 0.14 - 1.5 mm2 26 - 14 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 78 Rated current when using cross connectors For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are to be covered by partitions. Description 2) * Multi-tier ground block with tension spring connection for mounting on TS 35 50 Multi-tier block, black Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKF 1,5 E2/SL/35 Std. Pack 500 V 6 kV 3 1) 300 V 300 V Std. Pack 50 1) For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are to be covered by partitions. fasis Accessories for fasis WKF 1,5... Accessories End plate Partition Cross connector, insulated gray gray 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 Cover with warning symbol over 5 blocks yellow Marking tag carrier, 2-fold Screwdriver, uninsulated Type Part No. APF 1,5 E2 TWF 1,5 E2 IVB WKF 1,5 - 2 IVB WKF 1,5 - 3 IVB WKF 1,5 - 4 IVB WKF 1,5 - 5 IVB WKF 1,5 - 10 IVB WKF 1,5 - 20 LEL 1,5/1 WEISS LEL 1,5/2 GRAU ADF 1,5/5 GELB BT 4/2 DIN 5264 B 0,4x2,5 07.312.8753.0 07.312.8853.0 Z7.268.0227.0 Z7.268.0327.0 Z7.268.0427.0 Z7.268.0527.0 Z7.268.1027.0 Z7.268.2027.0 05.564.4253.0 05.564.4353.0 04.343.6953.8 04.243.0953.0 06.502.4300.0 Std. Pack 10 10 10 10 10 10 10 10 10 10 10 100 5 79 fasis Multi-tier blocks with tension spring connection WKFN 2,5 E/35 WKFN 2,5 E/N/D/35 * Multi-tier block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray Multi-tier block, combined, gray WKFN 2,5 E/35 WKFN 2,5 E/N/D/35 56.703.7055.0 56.703.7655.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 82 mm / 48 mm 11 mm NMnD9 IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 24 A 20 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 1) 2) CSA 24 - 12 24 A 300 V Std. Pack 100 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 20/21,5 A1) 440/275 V2) 1. value at 40 K / 2. value at 45 K When using cross connectors on the upper tier WKFN 2,5 E/N/D/35 WKFN 2,5 E/VB/35 * Multi-tier block, vertically connected, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Function Color ID Upper tier Feed-through blue Lower tier Feed-through gray Description Type Part No. Multi-tier block, black WKFN 2,5 E/VB/35 56.703.6955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 E/SL/35 * Ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 1) CSA 24 - 12 24 A 600 V 20/21,5 A1) 440 V 1. value at 40 K / 2. value at 45 K Type Part No. Ground block, green/yellow WKFN 2,5 E/SL/35 56.703.8955.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 80 5 mm / 82 mm / 48 mm 11 mm NMD9 IEC UL EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 24 A 20 A 500 V 600 V 6 kV 3 Std. Pack 5 mm / 82 mm / 48 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 500 V 6 kV 3 600 V CSA 24 - 12 600 V Std. Pack 100 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 fasis WKFN 2,5 E/D/SL/35 WKFN 2,5 E/N/SL/35 * Multi-tier block, combined, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, combined, gray Multi-tier block, combined, gray WKFN 2,5 E/D/SL/35 WKFN 2,5 E/N/SL/35 56.703.7855.0 56.703.7755.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 82 mm / 48 mm 11 mm MD IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 24 A 20 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree * Multi-tier function block with tension spring connection for mounting on TS 35 Function Color ID Upper tier Feed-through gray Lower tier Ground conductor green/yellow PTB 04 ATEX 1051 U ? EN 60 079-0/-7 24 - 12 24 A 300 V Function Color ID Upper tier Feed-through blue Lower tier Ground conductor green/yellow Description Type Part No. Multi-tier function block, red Multi-tier function block, orange WKFN 2,5 E.../35 WKFN 2,5 E.../35 56.703.XX55.5 56.703.XX55.9 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Nominal cross section 2.5 mm2 100 100 WKFN 2,5 E/N/SL/35 WKFN 2,5 E/D/SL/35 WKFN 2,5 E...G CSA Std. Pack Cross section fine-stranded Cross section solid/stranded Cross section, AWG 5 mm / 82 mm / 48 mm 11 mm EMD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 Std. Pack UL 100 100 CSA 22 - 12 24 - 12 Function diagram for fasis WKFN 2,5 E... The multi-tier block is available on request as a function block for a wide variety of switching tasks. 56.703.7555.9 56.703.7555.5 56.703.8255.5 I =1A U = 1000 V 56.703.7455.9 LED red R = 4.7 k P = 0.5 W U = 24 V DC 56.703.7155.5 56.703.7155.9 56.703.7955.5 I =1A U = 1000 V 56.703.7255.5 LED red R = 4.7 k P = 0.5 W U = 24 V DC 56.703.8355.5 I =1A U = 1000 V 56.703.7355.5 R = 680 k P = 0.25 W U = 100-500 V 56.703.8055.9 I =1A U = 1000 V Accessories for fasis WKFN 2,5 E/... Accessories End plate Partition Cross connector, insulated gray gray 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole Vertical cross connector 1 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Marking tag carrier, 2-fold Type Part No. APFN 2,5 E WFN 2,5 E IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 10 IVB WKF 2,5 - 20 IVB WKF-V LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB BT 5/2 07.312.7355.0 07.312.7455.0 Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.7027.0 Z7.280.8027.0 Z7.261.1127.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 04.243.0855.0 Std. Pack 10 10 10 10 10 10 20 20 10 100 100 100 10 100 81 fasis Duo multi-tier terminal blocks with tension spring connection WKFN 2,5 E1/2/35 WKFN 2,5 E1/2/N/D/35 * Duo multi-tier block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray Multi-tier block, combined, gray WKFN 2,5 E1/2/35 WKFN 2,5 E1/2/N/D/35 56.703.6055.0 56.703.6355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 5 mm / 107 mm / 48 mm 11 mm NMD9 IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 22 A 20 A 500 V 300 V 6 kV 3 1) 2) WKFN 2,5 E1/2/VB/35 * Duo multi-tier block, vertically connected, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Duo multi-tier ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 20/21 A1) 440/275 V2) 1. value at 40 K / 2. value at 45 K When using cross connectors on the upper tier Type Part No. Multi-tier block, black WKFN 2,5 E1/2/VB/35 56.703.5955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 107 mm / 48 mm 11 mm NMD9 IEC UL EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 22 A 20 A 500 V 300 V 6 kV 3 1) CSA 24 - 12 24 A 300 V Std. Pack 20/21 A1) 440 V 1. value at 40 K / 2. value at 45 K Type Part No. TWFN 2,5 E1/2 07.312.7855.0 Description Type Part No. Ground block, green/yellow WKFN 2,5 E1/2/SL/35 56.703.6255.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Accessories Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 82 24 - 12 24 A 300 V 50 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 E1/2/SL/35 CSA Std. Pack 5 mm / 107 mm / 48 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 500 V 6 kV 3 600 V CSA 24 - 12 600 V Std. Pack 10 Std. Pack 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 fasis WKFN 2,5 E1/2/D/SL/35 WKFN 2,5 E1/2/N/SL/35 * Duo multi-tier block, combined, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block,combined, gray Multi-tier block, combined, gray WKFN 2,5 E1/2/D/SL/35 WKFN 2,5 E1/2/N/SL/35 56.703.6155.0 56.703.6455.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 107 mm / 48 mm 11 mm MD IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 22 A 20 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Block color: gray WKFN 2,5 E1/2/35 Function Color ID Upper tier Feed-through gray Lower tier Feed-through gray WKFN 2,5 E1/2/N/D/35 Block color: gray Function Color ID Upper tier Feed-through blue Lower tier Feed-through gray WKFN 2,5 E1/2/VB/35 Block color: black 50 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 24 - 12 24 A 300 V Block color: gray WKFN 2,5 E1/2/D/SL/35 Function Color ID Upper tier Feed-through gray Lower tier Ground conductor green/yellow Block color: gray WKFN 2,5 E1/2/N/SL/35 Function Color ID Upper tier Feed-through blue Lower tier Ground conductor green/yellow WKFN 2,5 E1/2/SL/35 CSA Std. Pack Block color: green/yellow Function Color ID Function Color ID Upper tier Feed-through black Upper tier Ground conductor green/yellow Lower tier vert. jumpered black Lower tier vert. jumpered green/yellow Accessories for fasis WKFN 2,5 E1/2/... Accessories End plate Partition Cross connector, insulated gray gray 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole Vertical cross connector 1 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Marking tag carrier, 2-fold Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. APFN 2,5 E1/2 TWFN 2,5 E1/2 IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 10 IVB WKF 2,5 - 20 IVB WKF-V LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB BT 5/2 PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M 07.312.7755.0 07.312.7855.0 Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.7027.0 Z7.280.8027.0 Z7.261.1127.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 04.243.0855.0 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 10 20 20 10 100 100 100 10 100 10 10 5 10 83 fasis Multi-tier terminal blocks with tension spring connection WKFN 2,5 E3/35 * Multi-tier block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray WKFN 2,5 E3/35 56.703.3055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 5 mm / 123 mm / 59 mm 11 mm NMnD9 IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 20 A 20 A 500 V 300 V 6 kV 3 1) 2) WKFN 2,5 E3/VB/35 * Multi-tier block, vertically connected, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 * Multi-tier ground block with tension spring connection for mounting on TS 35 * Nominal cross section 2,5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 19/20 A1) 440/275 V2) 1. value at 40 K / 2. value at 45 K When using cross connectors on the upper tier Description Type Part No. WKFN 2,5 E3/VB/35 56.703.2955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 123 mm / 59 mm 11 mm NMD9 IEC UL EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 20 A 20 A 500 V 600 V 6 kV 3 1) CSA 24 - 12 24 A 600 V Std. Pack 20/21 A1) 440 V 1. value at 40 K / 2. value at 45 K Description Type Part No. WKFN 2,5 E/SL/35 56.703.8855.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Multi-tier ground block, green/yellow Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 84 24 - 12 24 A 300 V 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 Multi-tier block, black Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 E3/SL/35 CSA Std. Pack 5 mm / 123 mm / 59 mm 11 mm NMnD9 IEC UL EN 60 947-7-2 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 500 V 6 kV 3 600 V CSA 24 - 12 600 V Std. Pack 50 PTB 04 ATEX 1051 U ? EN 60 079-0/-7 0.2 - 2.5 mm2 0.13 - 4 mm2 fasis Multi-tier / Motor connection block with tension spring connection WKFN 2,5 E3/D/D/SL/35 WKFN 2,5 E3/N/D/SL/35 * Multi-tier block, combined, with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray Multi-tier block, gray WKFN 2,5 E3/D/D/SL/35 WKFN 2,5 E3/N/D/SL/35 56.703.3355.0 56.703.3255.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 123 mm / 59 mm 11 mm NMD9 IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 4 mm2 22 - 12 20 A 20 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 E3/N/D/SL/35 WKF 4 3D/SL * Motor connection block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 Block color: gray CSA Std. Pack PTB 04 ATEX 1051 U ? EN 60 079-0/-7 24 - 12 24 A 300 V WKFN 2,5 E3/D/D/SL/35 Function Color ID Upper tier Feed-through blue Upper tier Center tier Feed-through gray Lower tier Ground conductor green/yellow Color ID Feed-through gray Center tier Feed-through gray Lower tier Ground conductor green/yellow Description Type Part No. WKF 4 3D/SL 56.704.8453.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Block color: gray Function Motor connection block, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 50 50 6 mm / 100 mm / 84 mm 10 mm D IEC EN 60 947-7-1/DIN VDE 0611 T1 0.13 - 4 mm2 0.13 - 4 mm2 UL Std. Pack 50 CSA 28 - 10 30 A 600 V 28 A 800 V 8 kV 3 Accessories for fasis WKFN 2,5 E3/... Accessories End plate Partition Cross connector, insulated gray gray 2 pole 3 pole 4 pole 5 pole 10 pole 20 pole Vertical cross connector 1 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Marking tag carrier, 2-fold Type Part No. APFN 2,5 E3 TWFN 2,5 E3 IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 10 IVB WKF 2,5 - 20 IVB WKF-V LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB BT 5/2 07.312.7555.0 07.312.7655.0 Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.7027.0 Z7.280.8027.0 Z7.261.1127.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 04.243.0855.0 Std. Pack 10 10 10 10 10 10 20 20 10 100 100 100 10 100 85 fasis Multi-tier terminal blocks with tension spring connection WKFN 4 E/35 WKFN 4 E/N/D/35 * Multi-tier block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, gray Multi-tier block, combined, gray WKFN 4 E/35 WKFN 4 E/N/D/35 56.704.7055.0 56.704.7655.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 90 mm / 48 mm 11 mm NM IEC UL EN 60 947-7-1 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 32 A 30 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note CSA 24 - 10 32 A 300 V Std. Pack 100 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 27/29 A1)2) 440/352 V3) 1) 1. value at 40 K / 2. value at 45 K When cross connectors are used acc. to EN 60079-0 and EN60079-7 the current must be reduced to 2 A at 45 K.. 3) When using cross connectors on the upper tier 2) Block color: gray WKFN 4 E/N/D/35 WKFN 4 E/VB/35 * Multi-tier block, vertically connected, with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Function Color ID Upper tier Feed-through blue Lower tier Feed-through gray Description Type Part No. Multi-tier block, black WKFN 4 E/VB/35 56.704.6955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 4 E/SL/35 * Multi-tier ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 1) CSA 24 - 10 32 A 300 V 30/31 A1) 440 V 1. value at 40 K / 2. value at 45 K Type Part No. Multi-tier ground block, green/yellow WKFN 4 E SL/35 56.704.9255.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 Description Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 86 6 mm / 90 mm / 48 mm 11 mm NM IEC UL EN 60 947-7-1 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 32 A 30 A 500 V 600 V 6 kV 3 Std. Pack 6 mm / 90 mm / 48 mm 11 mm NM IEC UL EN 60 947-7-2 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 500 V 6 kV 3 600 V CSA 24 - 10 600 V Std. Pack 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 0.13 - 4 mm2 0.2 - 6 mm2 fasis Multi-tier terminal blocks with tension spring connection WKFN 4 E/D/SL/35 WKFN 4 E/N/SL/35 * Multi-tier block, combined, with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Description Type Part No. Multi-tier block, combined, gray Multi-tier block, combined, gray WKFN 4 E/D/SL/35 WKFN 4 E/N/SL/35 56.704.7855.0 56.704.7755.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 6 mm / 90 mm / 48 mm 11 mm M IEC UL EN 60 947-7-1 2 0.13 - 4 mm 0.13 - 6 mm2 24 - 10 32 A 30 A 500 V 300 V 6 kV 3 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Block color: gray WKFN 4 E/D/SL/35 WKFN 4 E /35... * Multi-tier function block with tension spring connection for mounting on TS 35 Function Color ID Upper tier Feed-through gray Lower tier Ground conductor green/yellow 24 - 10 32 A 300 V Block color: gray WKFN 4 E/N/SL/35 Function Color ID Upper tier Feed-through blue Lower tier Ground conductor green/yellow Type Part No. Multi-tier function block, red Multi-tier function block, orange WKFN 4 E /35... WKFN 4 E /35... 56.704.XX55.5 56.704.XX55.9 6 mm / 90 mm / 48 mm 11 mm EMD IEC EN 60 947-7-1 2 0.13 - 4 mm 0.13 - 6 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG 100 100 PTB 05 ATEX 1104 U ? EN 60 079-0/-7 Description General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Nominal cross section 4 mm2 CSA Std. Pack Std. Pack UL 100 100 CSA 24 - 10 24 - 10 Function diagram for fasis WKFN 4 E/... The multi-tier block is available on request as a function block for a wide variety of switching tasks. 56.704.7555.9 56.704.7555.5 56.704.8255.5 I =1A U = 1000 V 56.704.7455.9 LED red R = 4.7 k P = 0.5 W U = 24 V DC 56.704.7155.5 56.704.7155.9 56.704.7955.5 I =1A U = 1000 V 56.704.7255.5 LED red R = 4.7 k P = 0.5 W U = 24 V DC 56.704.8355.5 I =1A U = 1000 V 56.704.7355.5 R = 680 k P = 0.25 W U = 100-500 V 56.704.8055.9 I =1A U = 1000 V Accessories for fasis WKFN 4 E/... Accessories End plate Partition Cross connector, insulated Vertical cross connector, insulated Wire entry guide gray gray 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 1 pole 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Type Part No. APFN 4 E... TWFN 4 E... IVB WKF 4 - 2 IVB WKF 4 - 3 IVB WKF 4 - 4 IVB WKF 4 - 5 IVB WKF 4 - 6 IVB WKF 4 - 7 IVB WKF 4 - 8 IVB WKF 4 - 9 IVB WKF 4 - 10 IVB WKF-V LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ 07.312.9655.0 07.312.9755.0 Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.2027.0 Z7.261.1127.0 05.561.8553.0 05.561.8653.0 05.561.8753.0 Std. Pack 10 10 10 10 10 10 10 20 20 20 20 10 100 100 100 87 fasis Disconnect terminal blocks with tension spring connection WKFN 2,5 TKM/35 * Disconnect terminal block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Disconnect terminal block, gray WKFN 2,5 TKM/35 56.703.5355.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 TKM 1/2/35 * Duo disconnect terminal block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Duo disconnect terminal block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 24 - 12 19 A 300 V Type Part No. APFN 2,5 D1/2 TWFN 2,5 D1/2 07.312.6955.0 07.312.7055.0 Description Type Part No. Disconnect terminal block, gray WKFN 2,5 TKM 1/2/35 56.703.5455.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 72 mm / 38 mm 11 mm MD IEC EN 60 947-7-1 0.14 - 2.5 mm2 0.2 - 4 mm2 20 A 630 V 6 kV 3 UL 24 - 12 19 A 300 V Accessories End plate, gray Partition, gray Type Part No. APFN 2,5 D2/2 TWFN 2,5 D2/2 07.312.7155.0 07.312.7255.0 Description Type Part No. Disconnect terminal block, gray WKFN 2,5 TKM 2/2/35 56.703.5555.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray 88 20 A 630 V 6 kV 3 UL Accessories End plate, gray Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 TKM 2/2/35 5 mm / 60 mm / 38 mm 11 mm MD IEC EN 60 947-7-1 0.14 - 2.5 mm2 0.2 - 4 mm2 5 mm / 85 mm / 38 mm 11 mm MD IEC EN 60 947-7-1 0.14 - 2.5 mm2 0.2 - 4 mm2 20 A 630 V 6 kV 3 UL 24 - 12 19 A 300 V Type Part No. APFN 2,5 TKM D2/2 TWFN 2,5 TKM D2/2 07.313.0055.0 07.313.0155.0 Std. Pack 100 CSA 24 - 12 20 A 300 V Std. Pack 10 10 Std. Pack 100 CSA 24 - 12 20 A 300 V Std. Pack 10 10 Std. Pack 50 CSA 24 - 12 20 A 300 V Std. Pack 10 10 fasis Multi-tier disconnect terminal block with tension spring connection WKFN 2,5 TKM E1/35 * Multi-tier disconnect terminal block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Disconnect terminal block, gray WKFN 2,5 TKM E1/35 56.703.6555.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 2,5 TKM E2/35 * Multi-tier disconnect terminal block with tension spring connection for mounting on TS 35 * Nominal cross section 2.5 mm2 5 mm / 107 mm / 48 mm 11 mm MD IEC EN 60 947-7-1 0.14 - 2.5 mm2 0.2 - 4 mm2 UL 24 - 12 19 A 300 V 20 A 500 V 6 kV 3 Accessories End plate, gray Partition, gray Type Part No. APFN 2,5 E1/2 TWFN 2,5 E1/2 07.312.7755.0 07.312.7855.0 Description Type Part No. Disconnect terminal block, gray WKFN 2,5 TKM E2/35 56.703.6655.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray 5 mm / 107 mm / 48 mm 11 mm MD IEC EN 60 947-7-1 0.14 - 2.5 mm2 0.2 - 4 mm2 UL 24 - 12 19 A 300 V 19 A 500 V 6 kV 3 Type Part No. APFN 2,5 E1/2 TWFN 2,5 E1/2 07.312.7755.0 07.312.7855.0 Std. Pack 50 CSA 24 - 12 20 A 300 V Std. Pack 10 10 Std. Pack 50 CSA 24 - 12 19 A 300 V Std. Pack 10 10 Accessories for fasis WKFN 2,5 TKM... Accessories Cross connector, insulated 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 -20 LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ ADFN 2,5/4 GELB PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 100 100 100 10 10 10 5 10 89 fasis Fuse blocks with tension spring connection WKFN 4 TKG with THSi 5 x 20 * Disconnect ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Disconnect ground block, gray Fuse disconnect lever Fuse disconnect lever with LED 12-24 V2) Fuse disconnect lever with LED 24-60 V2) Fuse disconnect lever with GL 110-250 V2) WKFN 4 TKG/35 THSI 5x20 THSI 5x20 LED24 THSI 5x20 LED60 THSI 5x20 GL250 56.704.4055.0 Z1.298.1053.0 Z1.298.1153.0 Z1.298.1253.0 Z1.298.1353.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 4 TKG with THSi 6,3 x 32 * Disconnect ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 6 mm / 82 mm / 38 mm 11 mm MD IEC UL EN 60 947-7-3 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 1) 1) 500 V 8 kV 3 600 V 2) 2) 22 - 10 10 A1) 300 V2) Type Part No. APFN 4 D2/2 TWFN 4 D2/2 07.312.9055.0 07.312.9155.0 Description Type Part No. Disconnect ground block, gray Fuse disconnect lever Fuse disconnect lever with LED 12-24 V2) Fuse disconnect lever with LED 24-60 V2) Fuse disconnect lever with GL 110-250 V2) Fuse disconnect lever with GL 500 V2) WKFN 4 TKG/35 THSI 6,3x32 THSI 6,3x32 LED24 THSI 6,3x32 LED60 THSI 6,3x32 GL250 THSI 6,3x32 GL500 56.704.4055.0 Z1.298.1653.0 Z1.298.1753.0 Z1.298.1853.0 Z1.298.1953.0 Z1.298.2053.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Intermediate plate, 4 mm, blue Partition, gray 6 mm / 82 mm / 38 mm 11 mm MD IEC UL EN 60 947-7-3 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 1) 1) 500 V2) 8 kV 3 600 V2) 100 10 10 10 10 KEMA 01 ATEX 2087 U ? CSA EN 60 079-0/-7 Accessories End plate, gray Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack Std. Pack 10 10 Std. Pack 100 10 10 10 10 10 KEMA 01 ATEX 2087 U ? CSA EN 60 079-0/-7 22 - 10 10 A1) 300 V2) Type Part No. APFN 4 D2/2 ZP/WKFN 4 TKG TWFN 4 D2/2 07.312.9055.0 07.313.1655.0 07.312.9155.0 Std. Pack 10 10 10 Info and accessories for fasis WKFN 4 TKG with THSi... The current is determined by the inserted fuse. The voltage range is determined by the built-in LED display. Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications. Indicator (24 V): LED, red current consumption: 10.3 mA Indicator (220 V): LED, red current consumption: 0.3 mA 1) 2) When selecting G fuse inserts, make sure that the specified maximum power is not exceeded. Maximum power loss at 23 C ambient temperature (according to DIN EN 60947-7-3) Type Rated voltage Overload protection Exclusive shortcircuit protection Single Group Single Group arrangement arrangement arrangement arrangement THSI 5 x 20 THSI 6,3 x 32 90 250 V 500 V 1.6 W 2.5 W 1.6 W 1.6 W 4.0 W 4.0 W 2.5 W 2.5 W Accessories Cross connector, insulated for WKFN 4 TKG with THSi 5x20 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 4-2 IVB WKF 4-3 IVB WKF 4-4 IVB WKF 4-5 IVB WKF 4-6 IVB WKF 4-7 IVB WKF 4-8 IVB WKF 4-9 IVB WKF 4-10 LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ ADF 4/4 GELB ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.2027.0 05.561.8553.0 05.561.8653.0 05.561.8753.0 04.343.6153.8 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 100 100 100 10 10 5 10 For WKFN 4 TKG with THSi 6.3x32 and intermediate plate cross connector IVB WKF 2,5-x must be used. fasis WKFN 4 TKG with SiST * Disconnect ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Disconnect ground block, gray Fuse holder for fuse 5 x 20 Fuse holder with indicator (24 V)2) Fuse holder with indicator (220 V) 2) WKFN 4 TKG/35 Si ST Si ST LED Si ST GL 56.704.4055.0 Z1.299.4055.0 Z1.299.4155.0 Z1.299.4255.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKFN 4 TKG with DiST * Disconnect ground block with tension spring connection for mounting on TS 35 * Nominal cross section 4 mm2 6 mm / 82 mm / 38 mm 11 mm MD IEC UL EN 60 947-7-3 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 1) 500 V 8 kV 3 1) 600 V 2) 2) 22 - 10 10 A1) 300 V2) Type Part No. APFN 4 D2/2 TWFN 4 D2/2 07.312.9055.0 07.312.9155.0 Description Type Part No. Disconnect ground block, gray Diode plug - empty Jmax = 10 A1) Diode plug - diode Jmax = 1 A1) Diode plug - diode Jmax = 1 A1) Diode plug with jumper Jmax = 10 A1) WKFN 4 TKG/35 DIST ... DIST-1 N 4007-13) DIST-1 N 4007-24) DIST-D 56.704.4055.0 Z1.299.3055.0 Z1.299.3155.0 Z1.299.3355.0 Z1.299.3255.0 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray 6 mm / 82 mm / 38 mm 11 mm MD IEC UL EN 60 947-7-3 0.13 - 4 mm2 0.13 - 6 mm2 24 - 10 1) 1) 500 V2) 8 kV 3 600 V2) 100 10 10 10 KEMA 01 ATEX 2087 U ? CSA EN 60 079-0/-7 Accessories End plate, gray Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack Std. Pack 10 10 Std. Pack 100 10 10 10 10 KEMA 01 ATEX 2087 U ? CSA EN 60 079-0/-7 22 - 10 10 A1) 300 V2) Type Part No. APFN 4 D2/2 TWFN 4 D2/2 07.312.9055.0 07.312.9155.0 Std. Pack 10 10 Info and Accessories for fasis WKFN 4 TKG with SiST and DiST The current is determined by the inserted fuse. The voltage range is determined by the built-in LED display. Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications. Indicator (24 V): LED, red current consumption: 10.3 mA Indicator (220 V): LED, red current consumption: 0.3 mA 3) / 4) Periodic peak voltage 1000 V Direction Anode Cathode3) of the diode: Cathode Anode4) 1) 2) Type Rated voltage Overload protection 250 V 1.6 W 1.6 W 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 4-2 IVB WKF 4-3 IVB WKF 4-4 IVB WKF 4-5 IVB WKF 4-6 IVB WKF 4-7 IVB WKF 4-8 IVB WKF 4-9 IVB WKF 4-10 LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ ADF 4/4 GELB ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.2027.0 05.561.8553.0 05.561.8653.0 05.561.8753.0 04.343.6153.8 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 100 100 100 10 10 5 10 Exclusive shortcircuit protection Single Group Single Group arrangement arrangement arrangement arrangement SIST Accessories Cross connector, insulated 2.5 W 1.6 W When selecting G fuse inserts, make sure that the specified maximum power is not exceeded. Maximum power loss at 23 C ambient temperature (according to DIN EN 60947-7-3) 91 fasis Fuse blocks with tension spring connection WKFN 4 FSI * Fuse block for automoblie fuses for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Fuse block, gray WKFN 4 FSI 56.704.4155.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 4 FSI * Fuse block with indicator for mounting on TS 35 * Nominal cross section 4 mm2 The WKFN 4 FSI .. type fuse blocks take blade-type fuses according to ISO 8820 (DIN 72581-3). CSA * 800 V 8 kV 3 * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com Part No. 07.312.9055.0 07.313.1655.0 07.312.9155.0 Description Type Part No. Fuse block, gray Fuse block, gray WKFN 4 FSI LED12 WKFN 4 FSI LED24 56.704.4255.0 56.704.5355.0 Std. Pack 10 10 10 Std. Pack 100 100 6 mm / 82 mm / 39 mm 12 mm IEC EN 60 947-7-3 2 0.13 - 4 mm 0.13 - 6 mm2 UL CSA * 800 V 8 kV 3 * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com Type Part No. APFN 4 D2/2 ZP/WKFN 4 TKG TWFN 4 D2/2 07.312.9055.0 07.313.1655.0 07.312.9155.0 Description Color Blade-type automobile fuse, DC 32 V Electrotechnical specialized trade Motor vehicle accessory market black gray violet pink beige brown red blue yellow Automotive fuses are not offered for sale by Wieland Electric! We recommend the following: 92 UL APFN 4 D2/2 ZP/WKFN 4 TKG TWFN 4 D2/2 Accessories End plate, gray Partition, 4 mm for TCP, gray Partition, gray Automotive fuses IEC EN 60 947-7-3 2 0.13 - 4 mm 0.13 - 6 mm2 Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 100 6 mm / 82 mm / 39 mm 12 mm Accessories End plate, gray Partition, 4 mm for TCP, gray Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Std. Pack Std. Pack 10 10 10 1A 2A 3A 4A 5A 7,5 A 10 A 15 A 20 A Thermal circuit breaker, DC 32 V ETA*, type 1610-21 or ETA*, type 1610-H2 with manual release 5A 6A 10 A 15 A 20 A Thermal circuit breaker, AC 250 V; DC 65 V ETA*, type 1180 .. 0,1 A 0,2 A 0,5 A 1A 2A 3A 4A 6A 8A 10 A * E-T-A Elektrotechnische Apparate GmbH, www.e-t-a.de fasis Supply terminal WKF 16/35 PV/WKFN * Supply terminal for mounting on TS 35 Description Type Part No. Supply terminal, gray WKF 16/35 PV/WKFN 56.716.0353.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data * Nominal cross section 2.5 mm2 * Ex e I/II ? II 2GD IM2 Follow the EX installation instructions on page 143 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories Cover with warning symbol over 4 blocks Screwdriver, uninsulated 12 mm / 82 mm / 48 mm 15 mm EJMD8 IEC UL EN 60 947-7-3 2 4 - 16 mm 4 - 16 mm2 24 - 4 76 A 75 A 800 V 600 V 8 kV 3 1) CSA 12 - 4 78 A 600 V Std. Pack 20 KEMA 01 ATEX 2087 U ? EN 60 079-0/-7 4 - 16 mm2 4 - 16 mm2 64 A1) 690 V Derating curves available on request Type Part No. ADF 16/4 GELB DIN 5264 B 1,0x5,5 04.343.6653.8 06.502.4200.0 Std. Pack 10 5 Potential distribution Jumpering one side both sides single double single double Imax 64 76 76 76 INblock 32 32 32 32 IVB WKF 4... Imax = In INblock Accessories for fasis WKFN 4 FSI... Accessories Cross connector, insulated, for 2 blocks 3 blocks 4 blocks 5 blocks 6 blocks 7 blocks 8 blocks 9 blocks 10 blocks Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 4 - 2 IVB WKF 4 - 3 IVB WKF 4 - 4 IVB WKF 4 - 5 IVB WKF 4 - 6 IVB WKF 4 - 7 IVB WKF 4 - 8 IVB WKF 4 - 9 IVB WKF 4 - 10 LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/1 SCHWARZ ADF 4/4 GELB DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.1027.0 05.561.8553.0 05.561.8653.0 05.561.8753.0 04.343.6153.8 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 100 100 100 10 5 10 93 fasis CON DIN rail terminal blocks with plug-in connection The system * Rated current up to 32 A * Connection cross-section 4 mm * Width 5 mm The connectors For application specific wire harness assemblies, or single pole test plug. The terminals Modular DIN rail mount terminals for universal use with pluggable connectors, all with tension spring connection technology. In addition to the pluggable connection, a tension spring connection also is available to use the block as a standard feed-through terminal. The jumpering system The standard Wieland push-in jumper system can be used in both the modular terminal and in the plug-in connector. All basic terminals are fully compatible with the fasis WKFN series, including the 16 mm feed-in terminal. The labeling system All termination points can be clearly labeled using the standard Wieland labeling system. Integrated safety Touch protection of all components, even when not connected, IP 20 when connected. All plug connectors have a built-in latching mechanism and coding option - no further accessories required. 94 The modular terminal block's integrated jumper channel maintains a permanent feed-through connection even when the plug is not installed. fasis CON Plug & Play in the control cabinet - with fasis CON fasis CON is a DIN rail terminal block system with a pluggable outgoing feeder, which offers modular, cost-saving solutions with advantages in every phase of the service life of an electrical system. fasis CON is a fully compatible part of the established fasis WKFN system. Both the terminal and the plug connector possess the high-performance features of fasis WKFN. fasis CON consists of feed-through and ground DIN rail terminal blocks with a wide variety of both wiring termination points and sockets for the fasis CON pluggable connectors. fasis CON is a cost-effective, high-performance and pluggable system solution. Cost-effective * Cost-optimized installation and maintenance times * Small numbers of components * Can be assembled individually * Pre-assembled modules High-performance * Range of terminals up to 4 mm * Rated current up to 32 A* * Rated voltage 500 V * Total width only 5 mm Pluggable * Complex systems can be brought on-line quickly and costeffectively with pluggable technology * Functional units can be tested easily * Field components can be more quickly replaced when faults occur * Systems can be expanded with pluggable technology Complete system * Uniform accessories * Coded to prevent mismating * All components can be jumpered * Comprehensive and clear labeling * Can be combined with fasis WKFN * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com 95 fasis CON DIN rail terminal blocks with plug-in connection WKFN 2,5 F/P/F * DIN rail terminal blocks with plug-in connection for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block F/P/F, gray Feed-through block F/P/F, blue Ground block, green/yellow WKFN 2,5 F/P/F WKFN 2,5 F/P/F WKFN 2,5 F/P/F-SL 56.703.2355.0 56.703.2355.6 56.703.2455.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note WKFN 2,5 2P/2F * DIN rail terminal blocks with plug-in connection for mounting on TS 35 * Nominal cross section 2.5 mm2 * Nominal cross section 2.5 mm2 Part No. 07.312.6955.0 07.312.6955.6 07.312.7055.0 Description Type Part No. Feed-through block 2P/2F, gray Feed-through block 2P/2F, blue Ground block, green/yellow WKFN 2,5 2P/2F WKFN 2,5 2P/2F WKFN 2,5 2P/2F-SL 56.703.2155.0 56.703.2155.6 56.703.2255.0 32 A* 500 V 8 kV 3 UL Std. Pack 10 10 10 Std. Pack 100 100 100 CSA 24 - 12 20 A 300 V * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com Type Part No. APFN 2,5 TKM D2/2 TWFN 2,5 TKM D2/2 07.313.0055.0 07.313.0155.0 Description Type WKFN 2,5 E/F/P Multi-tier block E/F/P, gray Multi-tier block, vertically connected, black WKFN 2,5 E/VB/F/P WKFN 2,5 E/F/P/SL Multi-tier ground block, green/yellow Accessories End plate, gray Partition, gray 96 5 mm / 85 mm / 39 mm 11 mm M IEC EN 60 947-7-1/-2 2 0.13 - 4 mm 0.13 - 4 mm2 Accessories End plate, gray Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note CSA * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com APFN 2,5 D1/2 APFN 2,5 D1/2 BLAU TWFN 2,5 D1/2 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 100 24 - 12 20 A 300 V Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note * Multi-tier blocks with plug-in connection for mounting on TS 35 32 A* 500 V 8 kV 3 UL Accessories End plate, gray End plate, blue Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data WKFN 2,5 E/../../.. 5 mm / 60 mm / 39 mm 11 mm M IEC EN 60 947-7-1/-2 0.13 - 4 mm2 0.13 - 4 mm2 Std. Pack 5 mm / 82 mm / 49 mm 11 mm M IEC EN 60 947-7-1/-2 0.13 - 4 mm2 0.13 - 4 mm2 22 A* 500 V 8 kV 3 Part No. 56.703.3455.0 56.703.3555.1 56.703.3655.0 UL Std. Pack 10 10 Std. Pack 100 100 100 CSA 24 - 12 20 A 300 V * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com Type Part No. APFN 2,5 E TWFN 2,5 E 07.312.7355.0 07.312.7455.0 Std. Pack 10 10 fasis CON Connectors Description WBF 2,5/../.. Type Part No. Std. Pack Connectors LEFT * Connectors for DIN rail terminal blocks with plug-in connection gray WBF 2,5 1/L/GR blue WBF 2,5 1/L/BL green/yellow WBF 2,5 1/L/SL Z1.110.8955.0 Z1.110.8955.6 Z1.110.8955.7 50 50 50 gray WBF 2,5 1/M/GR blue WBF 2,5 1/M/BL green/yellow WBF 2,5 1/M/SL Z1.110.8855.0 Z1.110.8855.6 Z1.110.8855.7 50 50 50 gray WBF 2,5 1/R/GR blue WBF 2,5 1/R/BL green/yellow WBF 2,5 1/R/SL Z1.110.9055.0 Z1.110.9055.6 Z1.110.9055.7 50 50 50 59.903.0155.0 59.903.0255.0 59.903.0355.0 59.903.0455.0 59.903.0555.0 59.903.0655.0 59.903.0755.0 59.903.0855.0 59.903.0955.0 59.903.1055.0 50 50 50 50 50 25 25 25 25 25 Connectors MIDDLE Connectors RIGHT Connectors preassembled, gray L M 1 pole 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole R General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note Accessories Strain relief Screwdriver, uninsulated Screwdriver, MINI WBF 2,5-1 WBF 2,5-2 WBF 2,5-3 WBF 2,5-4 WBF 2,5-5 WBF 2,5-6 WBF 2,5-7 WBF 2,5-8 WBF 2,5-9 WBF 2,5-10 5 mm 11 mm IEC EN 60 947-7-1/-2 2 0.13 - 4 mm 0.13 - 4 mm2 UL CSA 24 - 12 20 A 300 V 32 A* 500 V 8 kV 3 * Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com Type Part No. Z-WBF DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M 05.567.9155.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 Accessories for fasis WKFN 2,5... Accessories Cross connector, insulated, for 2 blocks 3 blocks 4 blocks 5 blocks 6 blocks 7 blocks 8 blocks 9 blocks 10 blocks 20 blocks Wire entry guide 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks yellow Test adapter, modular Screwdriver, uninsulated Screwdriver, uninsulated, MINI Type Part No. IVB WKF 2,5-2 IVB WKF 2,5-3 IVB WKF 2,5-4 IVB WKF 2,5-5 IVB WKF 2,5-6 IVB WKF 2,5-7 IVB WKF 2,5-8 IVB WKF 2,5-9 IVB WKF 2,5-10 IVB WKF 2,5-20 LELN 2,5/1 WEISS LELN 2,5/1 GRAU LELN 2,5/1 SCHWARZ ADFN 2,5/4 GELB PS WKC/F DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 04.343.8353.8 Z1.299.9753.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 100 100 100 10 10 5 10 97 fasis DIN rail terminal blocks with tension spring and pluggable connections WKF 2,5 D2/8113/35 * Duo feed-through block for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Du feed-through block, gray Duo feed-through block, blue WKF 2,5 D2/8113/35 WKF 2,5 D2/8113/35 BLAU 56.703.2053.0 56.703.2053.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 76 mm / 42 mm 11 mm MD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 2,5 D2/8113/SL/35 * Duo-Ground block for mounting on TS 35 * Nominal cross section 2.5 mm2 16 A 250 V 4 kV 3 * Multi-tier block for mounting on TS 35 * Nominal cross section 1.5 mm 2 Type Part No. 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks APF 2,5/D2/8113 APF 2,5/D2/8113 LEL 2,5/1 WEISS LEL 2,5/2 GRAU LEL 2,5/3 SCHWARZ ADF 2,5/4 GELB 07.312.4153.0 07.312.4153.6 05.561.6553.0 05.561.6653.0 05.561.6753.0 04.343.6053.8 Description Type Part No. Duo-Ground block, green/yellow WKF 2,5 D2/8113 SL/35 56.703.9253.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 76 mm / 42 mm 11 mm MD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 16 A 250 V 4 kV 3 UL Std. Pack 10 10 100 100 100 10 Std. Pack 100 CSA 300 V Part No. 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks 07.312.4153.0 05.561.6553.0 05.561.6653.0 05.561.6753.0 04.343.6053.8 Description Type Part No. Multi-tier block, gray WKF 1,5 E/8113/35 56.702.2053.0 Accessories End plate, gray Wire entry guide 24 - 12 15 A 300 V 300 V APF 2,5/D2/8113 LEL 2,5/1 WEISS LEL 2,5/2 GRAU LEL 2,5/3 SCHWARZ ADF 2,5/4 GELB 5 mm / 83 mm / 51 mm 8 mm NMD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 2.5 mm2 CSA 24 - 12 Type General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 22 - 12 Accessories End plate, gray Wire entry guide Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree UL 22 - 12 Std. Pack 10 100 100 100 10 Std. Pack 100 CSA 24 - 12 16 A 250 V 4 kV 3 0.13 - 0.2 mm 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks 98 22 - 12 15 A 300 V Accessories End plate, gray End plate, blue Wire entry guide Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 1,5 E/8113/35 UL Std. Pack 2 Type Part No. APF 1,5/E/8113 LEL 1,5/1 WEISS LEL 1,5/2 GRAU LEL 1,5/3 SCHWARZ ADF 1,5/4 GELB 07.312.4753.0 05.562.2453.0 05.562.2553.0 05.562.2653.0 04.343.8353.8 Std. Pack 10 100 100 100 10 fasis WKF 1,5 E/35 * Multi-tier block for mounting on TS 35 * Nominal cross section 1.5 mm2 Description Type Part No. Multi-tier block, gray WKF 1,5 E/35 56.702.7053.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray Wire entry guide wiecon PC board connector Type 8113 BFK * Spring clamp/tension spring system * 5 mm spacing, nominal cross section 2,5 mm2 * Accessories: coding pice 05.561.9153.0 * Rated voltages: VDE 0110/01.89 250 V/4 kV/3 - Overvoltage category III 400 V/4 kV/2 - Overvoltage category II 1000 V/4 kV/1 - Overvoltage category I 5 mm / 83 mm / 51 mm 8 mm NMD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 2.5 mm2 UL 30 - 14 15 A 300 V 17,5 A 400 V 6 kV 3 Type Part No. 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Cover with warning symbol over 4 blocks APF 1,5 E TWF 1,5 E LEL 1,5/1 WEISS LEL 1,5/2 GRAU LEL 1,5/3 SCHWARZ ADF 1,5/4 GELB 07.312.3553.0 07.312.3653.0 05.562.2453.0 05.562.2553.0 05.562.2653.0 04.343.8353.8 G Pole Part No. Part No. unmarked 25.920.3253.0 25.920.3353.0 25.920.3453.0 25.920.3553.0 25.920.3653.0 25.920.3753.0 25.920.3853.0 25.920.3953.0 25.920.4053.0 25.920.4153.0 25.920.4253.0 25.920.4353.0 25.920.4453.0 25.920.4553.0 25.920.4653.0 marked 25.920.0253.0 25.920.0353.0 25.920.0453.0 25.920.0553.0 25.920.0653.0 25.920.0753.0 25.920.0853.0 25.920.0953.0 25.920.1053.0 25.920.1153.0 25.920.1253.0 25.920.1353.0 25.920.1453.0 25.920.1553.0 25.920.1653.0 5 mm spacing 10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 55.00 60.00 65.00 70.00 75.00 80.00 T 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 55.00 60.00 65.00 70.00 75.00 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Std. Pack 100 CSA 30 - 14 15 A 600 V Std. Pack 10 10 100 100 100 10 Std. Pack 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 17- to 24- pole configurations upon request General data Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 9 mm NMD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 UL 22 - 12 12 A 300 V 12 A CSA 22 - 12 12 A 300 V Accessories for fasis WKF 2,5 D... and WKF 1,5 E... Accessories Cross connector, insulated Cover with warning symbol over 4 poles Screwdriver, uninsulated Coding strip 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole yellow Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 - 20 AD 8113/4 GELB DIN 5264 B 0,6 x 3,5 Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 04.343.6853.8 06.502.4000.0 05.561.0053.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 10 5 100 99 fasis Initiator and actuator blocks with tension spring connection For machine and system control wiring, practice-oriented solutions are preferred that are primarily economical and reliable and thus contribute to the system's operational and functional safety. fasis KOI was designed to connect the great variety of initiators and actuators to central and remote control systems. The initiator and actuator blocks of type WKF 1,5 KOI have, in particular, been conceived for the requirements in machine and system engineering. They facilitate the wiring task through clearly arranged termination points and an easily accessible and operable tension spring technology. fasis KOI is a compact and efficient wiring system for connection purposes, potential distribution and transmission of signals from initiators and actuators. System features and benefits * Control-compatible system solutions through accurate matching of the connection modules' number of poles to the input and output modules of the PLC. * Flexible connection module mounting options with either snap-on TS 35 DIN rail mount, or direct mounting to a backplane with screws. * Application-specific individual terminal block as a link between initiators, actuators and the PLC. Economically designed * Low space requirements due to compact dimensioning of the individual terminal blocks and integration of the potential distribution inside the connection module. * Efficient installation and start-up of the wiring system by simply fitting the connection module with components, making further accessories unnecessary. * Reduction of the warehousing costs due to a low variety of parts without having to forego flexibility in the application. Service-friendly operation * Short maintenance times for modifications of the terminal block assembly by replacing or extending individual blocks without interrupting the power supply of the other initiator and actuator blocks. * Immediate visual monitoring of the switching states due to integrated light-emitting diodes. * No maintenance required due to a permanently secure and dynamic tension spring clamp connection system. Application specific options * Power supply to the connection modules through supply blocks, with optional LEDs. * Potential distribution through connection modules in designs for 9 (1+8) or 18 (2x(1+8)) terminal blocks. * Initiator blocks, for example for the connection of 3-wire or 4-wire proximity or position switches, with optional LEDs. * Actuator terminals, for example for the connection of magnetic valves. 100 fasis Connection module Collect and distribute potentials * Potential distribution is achieved quickly and safely as soon as the terminal blocks are snapped on. * Cross connectors for the plus, minus and ground or screen potential are each integrated in the connection modules. * The system does not require any additional cross connectors. Wire entry guides Connect small cross sections safely * Wire entry guides prevent the wires from being inserted too deeply (smaller than 1 mm2) and enable an easy, professional and quick installation. * Ensure the connection of solid and fine-stranded wires smaller than 1 mm2. * Also see the accessories for DIN rail terminal blocks starting at page 120! Marking system All clamping points marked clearly * Marking tags easily readable even with the wires connected. * Clear assignment of wire to the termination point while wiring. * Simplified troubleshooting for servicing. * Customized marking with the wiemarc and wieplot marking systems. Materials High-quality materials * Special alloys enable low feed-through resistance and provide a gas-tight contact area: - clamping spring: stainless CrNi steel - current-carrying bar: tin-plated copper * Polyamide has excellent electrical, chemical and mechanical characteristics: - temperature resistance: up to 120C - creepage resistance: CTI 600 - flammability class: self-extinguishing, UL94-V2 101 fasis Initiator and actuator blocks with tension spring connection WKF 1,5 KOI 3L... * Initiator block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 Description Type Part No. Initiator block, gray Initiator block with LED, gray WKF 1,5 KOI 3L WKF 1,5 KOI 3L-PGE 37.702.7453.0 37.702.8453.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Wire entry guide 37.702.7453.0 * 65 V/1.5 kV/3 37.702.8453.0 * DC 24 V same as picture, but with LED WKF 1,5 KOI 3L/SL... * Initiator block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 Screwdriver, uninsulated Type Part No. 05.562.2453.0 05.562.2553.0 05.562.2653.0 06.502.4000.0 Type Part No. Initiator block, gray Initiator block with LED, gray WKF 1,5 KOI 3L/SL WKF 1,5 KOI 3L/SL-PGE 37.702.7553.0 37.702.8553.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Screwdriver, uninsulated 5 mm / 71 mm / 48 mm 10 mm MD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 1.5 mm2 UL 10 A * 28 - 16 10 A 65 V Type Part No. 0.13 - 0.2 mm2 LEL 1,5/1 WEISS 0.25 - 0.5 mm2 LEL 1,5/2 GRAU 0.75 - 1.0 mm2 LEL 1,5/3 SCHWARZ DIN 5264 B 0,6x3,5 05.562.2453.0 05.562.2553.0 05.562.2653.0 06.502.4000.0 50 50 CSA Std. Pack 100 100 100 5 Std. Pack 50 50 CSA Std. Pack 100 100 100 5 37.702.8553.0 * DC 24 V same as picture, but with LED WKF 1,5 KOE... * Supply block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 Description Type Part No. Supply block, black Supply block with LED, black WKF 1,5 KOE WKF 1,5 KOE-PGN 37.702.7753.0 37.702.8753.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Wire entry guide Screwdriver, uninsulated 102 28 - 16 10 A 65 V Description Accessories Wire entry guide 37.702.7753.0 * 65 V/1.5 kV/3 UL 10 A * 0.13 - 0.2 mm2 LEL 1,5/1 WEISS 0.25 - 0.5 mm2 LEL 1,5/2 GRAU 0.75 - 1.0 mm2 LEL 1,5/3 SCHWARZ DIN 5264 B 0,6x3,5 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 37.702.7553.0 * 65 V/1.5 kV/3 5 mm / 71 mm / 48 mm 10 mm MD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 1.5 mm2 Std. Pack 37.702.8753.0 * DC 24 V same as picture, but with LED 5 mm / 71 mm / 48 mm 10 mm MD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 1.5 mm2 UL 10 A * 28 - 16 10 A 65 V Type Part No. 0.13 - 0.2 mm2 LEL 1,5/1 WEISS 0.25 - 0.5 mm2 LEL 1,5/2 GRAU 0.75 - 1.0 mm2 LEL 1,5/3 SCHWARZ DIN 5264 B 0,6x3,5 05.562.2453.0 05.562.2553.0 05.562.2653.0 06.502.4000.0 Std. Pack 50 50 CSA Std. Pack 100 100 100 5 fasis WKF 1,5 KOA 2L... * Actuator block with tension spring connection for mounting on TS 35 * Nominal cross section 1.5 mm2 Description Type Part No. Actuator block, gray Actuator block with LED, gray WKF 1,5 KOA 2L WKF 1,5 KOA 2L/SL-PGE 37.702.7653.0 37.702.8653.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories Wire entry guide Screwdriver, uninsulated 37.702.7653.0 * 65 V/1.5 kV/3 5 mm / 71 mm / 48 mm 10 mm MD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 1.5 mm2 UL 10 A * 28 - 16 10 A 65 V Type Part No. 0.13 - 0.2 mm2 LEL 1,5/1 WEISS 0.25 - 0.5 mm2 LEL 1,5/2 GRAU 0.75 - 1.0 mm2 LEL 1,5/3 SCHWARZ DIN 5264 B 0,6x3,5 05.562.2453.0 05.562.2553.0 05.562.2653.0 06.502.4000.0 Std. Pack 50 50 CSA Std. Pack 100 100 100 5 37.702.8653.0 * DC 24 V same as picture, but with LED VM WKF ... * Connection module for 9 or 18 blocks Description Type Part No. Connection module for 9 blocks, black Connection module for 18 blocks, black VM WKF KO..9 VM WKF KO..18 69.700.0953.0 69.700.1853.0 General data Length: 9 pole module Length: 18 pole module Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree L = 9 x 5 mm + 1.5 mm L = 18 x 5 mm + 1.5 mm MD IEC EN 60 947-7-1 0.13 - 1.5 mm2 0.13 - 1.5 mm2 10 A * UL Std. Pack 10 5 CSA 10 A 65 V 103 fasis MINI DIN rail terminal blocks with tension spring connection With our DIN rail terminal block system fasis MINI we focus on the application`s size and flexibility. fasis MINI is a range of DIN rail terminal blocks in tension spring technology designed for installation in confined spaces. The portfolio comprises ground blocks and feed-through blocks in various colors with 2 or 4 connections per potential. The potential in the WKFM 2,5 terminal block series can be distributed, modified and extended quickly, flexibly and without problem by using cross connectors. Designed to be mounted in various ways, including TS 35 and TS 15 DIN rails, backpanels, or inside distribution boxes, we provide different solutions including snap-on mounting feet, pins, and screw flanges. Solutions for confined spaces * Space-saving miniature terminal blocks in many designs for installation inside distribution boxes, motors and applications with confined space requirements. * Easy wiring with user-friendly screwdriver entry guides at the top of the block. * Marking tags easily readable even with the wires connected. * Customized assembly design and marking using wieplan and wiemarc. Application specific options * Miniature terminal blocks with push-in mounting pin for installation directly onto the panel. * Miniature terminal blocks with screw flange for installation directly onto the panel. * Miniature terminal blocks for installation on TS 15 or TS 35 mounting rails. Customized assembly * DIN rail terminal blocks of the fasis MINI series are available in 2 and 4 pole configurations. * fasis MINI blocks can be snapped together with the integrated latching pins, with or without a mounting rail. * The various potentials and terminal blocks are visually distinguished by several color variations. * Individual marking using marking tags or customized printing of the terminal blocks. Permanent electrical connection * The tension spring system provides a dynamic clamping connection. Load-controlled and thermal cold flow properties of the connected wires are balanced. * Maintenance-free and gas-tight electrical connection as specified by the approvals. Customized layouts can be created individually. * Separation of electrical and mechanical functions. 104 fasis MINI WKMF 2,5/15 * Feed-through block with tension spring connection for mounting on TS 15 * Nominal cross section 2.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 Description Type Part No. Feed-through block, gray Feed-through block, blue WKMF 2,5/15 WKMF 2,5/15 55.703.0053.0 55.703.0053.6 5 mm / 36 mm / 30 mm 10 mm 8aD IEC UL EN 60 947-7-1 2 0.13 - 2.5 mm 0.13 - 2.5 mm2 26 - 12 24 A 20 A 500 V 600 V 6 kV 3 KEMA 03 ATEX 2071 U ? CSA EN 60 079-0/-7 0.5 - 2.5 mm2 0.5 - 2.5 mm2 26 - 12 20 A 19/20 A1) 300 V 275 V2) General data Width / length / height, incl. TS 5.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 1) 2) WKMF 2,5 SL/15 * Ground block with tension spring connection for mounting on TS 15 * Nominal cross section 2.5 mm2 * Ex e II ? II 2GD Follow the EX installation instructions on page 143 Std. Pack 100 100 with/without jumper For maintaining the proper isolation distances, the open side of feedthrough or ground blocks as well as both sides of a jumper are to be covered by partitions. Description Type Part No. Ground block, green/yellow WKMF 2,5 SL/15 55.703.9053.0 5 mm / 36 mm / 30 mm 10 mm 8aD IEC UL EN 60 947-7-2 0.13 - 2.5 mm2 0.13 - 2.5 mm2 26 - 12 KEMA 03 ATEX 2071 U ? CSA EN 60 079-0/-7 0.5 - 2.5 mm2 0.5 - 2.5 mm2 26 - 12 General data Width / length / height, incl. TS 5.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Note 500 V 6 kV 3 1) 600 V 300 V Std. Pack 100 1) For maintaining the proper isolation distances, the open side of feedthrough or ground blocks as well as both sides of a jumper are to be covered by partitions. Accessories for fasis WKMF 2,5... Accessories End plate, 1.5 mm wide Cross connector, insulated Screwdriver, uninsulated Screwdriver, uninsulated, MINI gray 2 pole 3 pole 4 pole 5 pole 10 pole 50 pole Type Part No. APMF 2,5 /15 IVB WKMF 2,5 - 2 IVB WKMF 2,5 - 3 IVB WKMF 2,5 - 4 IVB WKMF 2,5 - 5 IVB WKMF 2,5 - 10 IVB WKMF 2,5 M50 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M 07.312.5953.0 Z7.260.0229.0 Z7.260.0329.0 Z7.260.0429.0 Z7.260.0529.0 Z7.260.1029.0 Z7.260.0029.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 10 10 5 10 105 fasis MINI Mini terminal blocks with tension spring connection WKF 2,5/M with flange * Feed-through block with tension spring connection with or without flange * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block unmarked, gray Feed-through block unmarked, blue Feed-through block unmarked, orange Feed-through block with flange, gray Feed-through block with flange, blue Feed-through block with flange, orange WKF 2,5/M WKF 2,5/M BLAU WKF 2,5/M ORANGE WKF 2,5/M/F WKF 2,5/M/F BLAU WKF 2,5/M/F ORANGE 37.703.0553.0 37.703.0553.6 37.703.0553.9 39.703.0153.0 39.703.0153.6 39.703.0153.9 General data Width / length / height Wire strip length Approvals Technical data WKF 2,5/M/F 5 mm / 36 mm / 23 mm 11 mm EMD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree UL 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Std. Pack 100 100 100 100 100 100 CSA 24 - 12 25 A 600 V WKF 2,5/M WKF 2,5/MD with flange * Duo feed-through block with tension spring connection with or without flange * Nominal cross section 2.5 mm2 Description Type Part No. Duo feed-through block unmarked, gray Duo feed-through block unmarked, blue Duo feed-through block unmarked, orange Duo feed-through block with flange, gray Duo feed-through block with flange, blue Duo feed-through block with flange, orange WKF 2,5/MD WKF 2,5/MD BLAU WKF 2,5/MD ORANGE WKF 2,5/MD/F WKF 2,5/MD/F BLAU WKF 2,5/MD/F ORANGE 37.703.1053.0 37.703.1053.6 37.703.1053.9 39.703.0253.0 39.703.0253.6 39.703.0253.9 General data Width / length / height Wire strip length Approvals Technical data WKF 2,5/MD/F Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 10 mm / 36 mm / 23 mm 11 mm EMD IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 UL 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Std. Pack 100 100 100 100 100 100 CSA 24 - 12 25 A 600 V WKF 2,5/MD Accessories for fasis WKF 2,5/M... Accessories End plate with flange on the right End plate with flange on the right End plate with flange on the right Wire entry guide Wire entry guide Wire entry guide Cross connector, insulated Marking strip, unmarked marked marked marked Screwdriver, uninsulated 106 gray blue orange 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 2 pole (4 x 22 pcs.) (1 - 11) (12 - 55) (56 - 99) Type Part No. APF 2,5/M.../F/R APF 2,5/M.../F/R BLAU APF 2,5/M.../F/R ORANGE LEL 2,5/1 WEISS LEL 2,5/2 GRAU LEL 2,5/3 SCHWARZ 07.312.3153.0 07.312.3153.6 07.312.3153.9 05.561.6553.0 05.561.6653.0 05.561.6753.0 05.902.3500.0 04.244.0053.0 04.844.2053.0 04.844.2153.0 04.844.2253.0 06.502.4000.0 DIN 5264 B 0,6 x 3,5 Std. Pack 10 10 10 100 100 100 10 5 5 5 5 5 fasis MINI WKF 2,5/M/R with mounting foot * Feed-through block with tension spring connection, unmarked * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block unmarked, gray Feed-through block unmarked, blue Feed-through block unmarked, orange WKF 2,5/M/R WKF 2,5/M/R BLAU WKF 2,5/M/R ORANGE 38.703.0553.0 38.703.0553.6 38.703.0553.9 General data Width / length / height Wire strip length Approvals Technical data 5 mm / 36 mm / 23 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree UL 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Std. Pack 100 100 100 CSA 24 - 12 25 A 600 V Mounting hole: O 3,5 mm Plate thickness: 0,6 - 1,2 mm WKF 2,5/MD/R with mounting foot * Duo feed-through block with tension spring connection, unmarked * Nominal cross section 2.5 mm2 Description Type Part No. Duo feed-through block unmarked, gray Duo feed-through block unmarked, blue Duo feed-through block unmarked, orange WKF 2,5/MD/R WKF 2,5/MD/R BLAU WKF 2,5/MD/R ORANGE 38.703.1053.0 38.703.1053.6 38.703.1053.9 General data Width / length / height Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 10 mm / 36 mm / 23 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 UL 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Std. Pack 100 100 100 CSA 24 - 12 25 A 600 V Mounting hole: O 3,5 mm Plate thickness: 0,6 - 1,2 mm Accessories for fasis WKF 2,5/M.../R Accessories End plate End plate End plate Wire entry guide Wire entry guide Wire entry guide Cross connector, insulated Marking strip, unmarked marked marked marked Screwdriver, uninsulated gray blue orange 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 2 pole (4 x 22 pcs.) (1 - 11) (12 - 55) (56 - 99) Type Part No. APF 2,5/M... APF 2,5/M... BLAU APF 2,5/M... ORANGE LEL 2,5/1 WEISS LEL 2,5/2 GRAU LEL 2,5/3 SCHWARZ 07.312.2953.0 07.312.2953.6 07.312.2953.9 05.561.6553.0 05.561.6653.0 05.561.6753.0 05.902.3500.0 04.244.0053.0 04.844.2053.0 04.844.2153.0 04.844.2253.0 06.502.4000.0 DIN 5264 B 0,6 x 3,5 Std. Pack 10 10 10 100 100 100 10 5 5 5 5 5 107 fasis MINI Mini terminal blocks with tension spring connection WKF 2,5/M/15 * Feed-through block with tension spring connection, unmarked, for mounting on TS 15 * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block unmarked, gray Feed-through block unmarked, blue Feed-through block unmarked, orange Feed-through block unmarked, green WKF 2,5/M/15 WKF 2,5/M/15 BLAU WKF 2,5/M/15 ORANGE WKF 2,5/M/15 GRUN 55.703.0553.0 55.703.0553.6 55.703.0553.9 55.703.0553.7 General data Width / length / height, incl. TS 5.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 2,5/MD/15 * Duo feed-through block with tension spring connection, unmarked, for mounting on TS 15 * Nominal cross section 2.5 mm2 24 A 800 V 8 kV 3 UL 22 - 12 20 A 600 V Description Type Part No. Duo feed-through block unmarked, gray Duo feed-through block unmarked, blue Duo feed-through block unmarked, orange Duo feed-through block unmarked, green WKF 2,5/MD/15 WKF 2,5/MD/15 BLAU WKF 2,5/MD/15 ORANGE WKF 2,5/MD/15 GRUN 55.703.1053.0 55.703.1053.6 55.703.1053.9 55.703.1053.7 General data Width / length / height, incl. TS 5.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 108 5 mm / 36 mm / 27 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 10 mm / 36 mm / 27 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 24 A 800 V 8 kV 3 UL 22 - 12 20 A 600 V Std. Pack 100 100 100 100 CSA 24 - 12 25 A 600 V Std. Pack 100 100 100 100 CSA 24 - 12 25 A 600 V fasis MINI WKF 2,5/M/35 * Feed-through block with tension spring connection, unmarked, for mounting on TS 35 * Nominal cross section 2.5 mm2 Description Type Part No. Feed-through block unmarked, gray Feed-through block unmarked, blue Feed-through block unmarked, orange Feed-through block unmarked, green WKF 2,5/M/35 WKF 2,5/M/35 BLAU WKF 2,5/M/35 ORANGE WKF 2,5/M/35 GRUN 56.703.0553.0 56.703.0553.6 56.703.0553.9 56.703.0553.7 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WKF 2,5/MD/35 * Duo-Feed-through block with tension spring connection, unmarked, for mounting on TS 35 * Nominal cross section 2.5 mm2 Description 5 mm / 36 mm / 32 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Type Part No. WKF 2,5/MD/35 Duo-Feed-through block unmarked, gray WKF 2,5/MD/35 BLAU Duo-Feed-through block unmarked, blue Duo-Feed-through block unmarked, orange WKF 2,5/MD/35 ORANGE Duo-Feed-through block unmarked, green WKF 2,5/MD/35 GRUN General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree UL 10 mm / 36 mm / 32 mm 11 mm EMDU IEC EN 60 947-7-1 0.13 - 2.5 mm2 0.13 - 4 mm2 56.703.1053.0 56.703.1053.6 56.703.1053.9 56.703.1053.7 UL 22 - 12 20 A 600 V 24 A 800 V 8 kV 3 Std. Pack 100 100 100 100 CSA 24 - 12 25 A 600 V Std. Pack 100 100 100 100 CSA 24 - 12 25 A 600 V Accessories for fasis WKF 2,5/M... Accessories End plate gray End plate blue End plate orange Wire entry guide 0.13 - 0.2 mm2 Wire entry guide 0.25 - 0.5 mm2 Wire entry guide 0.75 - 1.0 mm2 Cross connector, insulated 2 pole Marking strip, unmarked (4 x 22 pcs.) marked (1 - 11) marked (12 - 55) marked (56 - 99) yellow, unmarked Screwdriver, uninsulated Type Part No. APF 2,5/M... APF 2,5/M... BLAU APF 2,5/M... ORANGE LEL 2,5/1 WEISS LEL 2,5/2 GRAU LEL 2,5/3 SCHWARZ 07.312.2953.0 07.312.2953.6 07.312.2953.9 05.561.6553.0 05.561.6653.0 05.561.6753.0 05.902.3500.0 04.244.0053.0 04.844.2053.0 04.844.2153.0 04.844.2253.0 04.244.0053.8 06.502.4000.0 DIN 5264 B 0,6 x 3,5 Std. Pack 10 10 10 100 100 100 10 5 5 5 5 5 5 109 fasis 110 fasis fasis WTP - DIN rail terminal blocks with push-in connection Terminate wires easily, directly and without tools! fasis WTP - DIN rail terminal blocks with push-in connection. Built according to an effective and comprehensive concept, including compact design and high-performance contact technology, fasis WTP reduces installation time and keeps inventory costs to a minimum. The product line includes feed-through and ground blocks with 2, 3 or 4 termination points, as well as multi-tier blocks. fasis WTP has been designed for use in machinery and plant engineering, as well as power distribution for buildings. Connection cross-sections up to 10 mm Rated current of up to 57 A Rated voltage of up to 1000 V 111 fasis fasis WTP - wires simply push-in Connect without tools * Push-in connection * Wires connect directly fasis push-in Nominal cross section 2.5 mm 4 mm Rated current 6 mm 10 mm 32 A Width 5 mm A WTP 2,5/4 57 A 8 mm A The same functionality - fewer items * 2.5 & 4 mm and 6 & 10 mm in one block WTP 6/10 Integrated release lever * No mix-up of wire-entry and screwdriver entry points * No contact with live parts * Use of Philips head screwdriver also possible Plug & Play - Completing the Concept * Dual jumpering channels * Plug-in jumper bars * Plug-in test adapter 112 fasis Wieland jumpering system - Perfect technology Perfect technology Copper Steel * Copper current bar guarantees low contact resistance * Steel spring guarantees strength, durability, and long-term stability Extremely rugged! * Indestructible steel spring * Vibration-proof connection Simple customization * Individual poles easy to remove * Circuits easy to identify Wieland marking system - Reliable identification Marking strips - Dependable * Maximum hold to the terminal * Solidify integrity of the assembly Endless strip - Effective * Mounting facilty for endless strips permits single step marking of entire assembly * Continuous labeling * Uses commercially available labeling systems Marking tags - Individual * Individual labeling with minimum effort * Ideal for service and maintenance 113 fasis Feed-through blocks with push-in connection WTP 2,5/4 * Feed-through block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Feed-through block, gray Feed-through block, blue WTP 2,5/4 WTP 2,5/4 BLAU 56.203.0055.0 56.203.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 D1/2 * Duo feed-through block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 * Duo feed-through block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 Part No. APFN 2,5 TWFN 2,5 07.312.6755.0 07.312.6855.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WTP 2,5/4 D1/2 WTP 2,5/4 D1/2 BLAU 56.203.5055.0 56.203.5055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 60 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-1 2 0.2 - 4 mm 0.2 - 4 mm2 24 - 12 32 A 30 A 1000 V 600 V 8 kV 3 CSA Type Part No. APFN 2,5 D1/2 TWFN 2,5 D1/2 07.312.6955.0 07.312.7055.0 Description Type Part No. Feed-through block, gray Feed-through block, blue WTP 2,5/4 D2/2 WTP 2,5/4 D2/2 BLAU 56.203.5155.0 56.203.5155.6 Accessories End plate, gray Partition, gray 5 mm / 72 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-1 0.2 - 4 mm2 0.2 - 4 mm2 24 - 12 32 A 30 A 1000 V 600 V 8 kV 3 pending ? Std. Pack 10 10 Std. Pack 100 100 pending ? 24 - 12 30 A 600 V Accessories End plate, gray Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 100 24 - 12 30 A 600 V Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 114 CSA Accessories End plate, gray Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 D2/2 5 mm / 47 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-1 2 0.2 - 4 mm 0.2 - 4 mm2 24 - 12 32 A 30 A 1000 V 600 V 8 kV 3 Std. Pack CSA Std. Pack 10 10 Std. Pack 100 100 pending ? 24 - 12 30 A 600 V Type Part No. APFN 2,5 D2/2 TWFN 2,5 D2/2 07.312.7155.0 07.312.7255.0 Std. Pack 10 10 fasis Feed-through blocks with push-in connection WTP 6/10 * Feed-through block with push-in connection for mounting on TS 35 * Nominal cross section 10 mm2 Description Type Part No. Feed-through block, gray Feed-through block, blue WTP 6/10 WTP 6/10 BLAU 56.206.0055.0 56.206.0055.6 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray 8 mm / 58 mm / 44 mm 12 mm Ea IEC UL EN 60 947-7-1 2 0.,2 - 10 mm 0.2 - 10 mm2 22 - 8 57 A 50 A 1000 V 600 V 8 kV 3 CSA Std. Pack 100 100 pending ? 22 - 8 50 A 600 V Type Part No. AP WTP 6/10 TW WTP 6/10 07.313.4155.0 07.313.4255.0 Std. Pack 10 10 Accessories for fasis WTP... Accessories for WTP 2,5/4... Cross connector, insulated Wire entry guide 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Accessories for WTP 6/10... Cross connector, insulated Test plug Screwdriver, uninsulated 2 pole 3 pole 4 pole 5 pole 10 pole Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 -20 LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Type Part No. IVB WKFN 6 - 2 IVB WKFN 6 - 3 IVB WKFN 6 - 4 IVB WKFN 6 - 5 IVB WKFN 6 - 10 ST 2/2,3 DIN 5264 B 0,8x4 Z7.282.5227.0 Z7.282.5327.0 Z7.282.5427.0 Z7.282.5527.0 Z7.282.6027.0 Z5.553.2921.0 06.502.4100.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 100 100 100 10 10 5 10 Std. Pack 10 10 10 10 10 10 5 115 fasis Ground blocks with push-in connection WTP 2,5/4 PE * Ground block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Ground block, green/yellow WTP 2,5/4 PE 56.203.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 D1/2/PE * Duo ground block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 * Duo ground block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 600 V Part No. 07.312.6755.0 07.312.6855.0 Description Type Part No. Ground block, green/yellow WTP 2,5/4 D1/2/PE 56.203.9355.0 5 mm / 60 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-2 0.2 - 4 mm2 0.2 - 4 mm2 24 - 12 1000 V 8 kV 3 600 V CSA Part No. APFN 2,5 D1/2 TWFN 2,5 D1/2 07.312.6955.0 07.312.7055.0 Description Type Part No. Ground block, green/yellow WTP 2,5/4 D2/2/PE 56.203.9155.0 Accessories End plate, gray Partition, gray 1000 V 8 kV 3 600 V 10 10 Std. Pack 100 pending ? 600 V Type 5 mm / 72 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-2 0.2 - 4 mm2 0.2 - 4 mm2 24 - 12 Std. Pack 24 - 12 Accessories End plate, gray Partition, gray General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data pending ? 600 V APFN 2,5 TWFN 2,5 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 24 - 12 Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 116 1000 V 8 kV 3 CSA Accessories End plate, gray Partition, gray Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 D2/2/PE 5 mm / 47 mm / 38 mm 11 mm Ea IEC UL EN 60 947-7-2 2 0.2 - 4 mm 0.2 - 4 mm2 24 - 12 Std. Pack CSA Std. Pack 10 10 Std. Pack 100 pending ? 24 - 12 600 V Type Part No. APFN 2,5 D2/2 TWFN 2,5 D2/2 07.312.7155.0 07.312.7255.0 Std. Pack 10 10 fasis Ground blocks with push-in connection WTP 6/10 PE * Ground block with push-in connection for mounting on TS 35 * Nominal cross section 10 mm2 Description Type Part No. Ground block, green/yellow WTP 6/10 PE 56.206.9055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree Accessories End plate, gray Partition, gray 8 mm / 58 mm / 44 mm 12 mm Ea IEC UL EN 60 947-7-2 2 0.2 - 10 mm 0.2 - 10 mm2 22 - 8 1000 V 8 kV 3 600 V CSA Std. Pack 100 pending ? 22 - 8 600 V Type Part No. AP WTP 6/10 TW WTP 6/10 07.313.4155.0 07.313.4255.0 Std. Pack 10 10 Accessories for fasis WTP... Accessories for WTP 2,5/4... Cross connector, insulated Wire entry guide 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI Accessories for WTP 6/10... Cross connector, insulated Test plug Screwdriver, uninsulated 2 pole 3 pole 4 pole 5 pole 10 pole Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 -20 LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Type Part No. IVB WKFN 6 - 2 IVB WKFN 6 - 3 IVB WKFN 6 - 4 IVB WKFN 6 - 5 IVB WKFN 6 - 10 ST 2/2,3 DIN 5264 B 0,8x4 Z7.282.5227.0 Z7.282.5327.0 Z7.282.5427.0 Z7.282.5527.0 Z7.282.6027.0 Z5.553.2921.0 06.502.4100.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 100 100 100 10 10 5 10 Std. Pack 10 10 10 10 10 10 5 117 fasis Multi-tier blocks with push-in connection WTP 2,5/4 E * Multi-tier block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 Description Type Part No. Multi-tier block, gray WTP 2,5/4 E 56.203.7055.0 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 E VB * Multi-tier block, vertically connected, with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 * Multi-tier ground block with push-in connection for mounting on TS 35 * Nominal cross section 4 mm2 Part No. APFN 2,5 E TWFN 2,5 E BT 5/2 07.312.7355.0 07.312.7455.0 04.243.0855.0 Description Type Part No. Multi-tier block, black WTP 2,5/4 E VB 56.203.6955.1 General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 5 mm / 82 mm / 48 mm 11 mm Ea IEC UL EN 60 947-7-2 0.2 - 4 mm2 0.2 - 4 mm2 24 - 12 24 A 20 A 500 V 600 V 6 kV 3 CSA Type Part No. APFN 2,5 E TWFN 2,5 E BT 5/2 07.312.7355.0 07.312.7455.0 04.243.0855.0 Description Type Part No. Multi-tier ground block, green/yellow WTP 2,5/4 E PE 56.203.8955.0 Accessories End plate, gray 5 mm / 82 mm / 48 mm 11 mm Ea IEC UL EN 60 947-7-2 0.2 - 4 mm2 0.2 - 4 mm2 24 - 12 500 V 6 kV 3 600 V pending ? Std. Pack 10 10 100 Std. Pack 100 pending ? 24 - 12 20 A 600 V Accessories End plate, gray Partition, gray Marking tag carrier, 2-fold General data Width / length / height, incl. TS 7.5 Wire strip length Approvals Technical data 100 24 - 12 20 A 300 V Type Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree 118 CSA Accessories End plate, gray Partition, gray Marking tag carrier, 2-fold Cross section fine-stranded Cross section solid/stranded Cross section, AWG Rated current Rated voltage Rated impulse voltage Pollution degree WTP 2,5/4 E PE 5 mm / 82 mm / 48 mm 11 mm Ea IEC UL EN 60 947-7-1 2 0.2 - 4 mm 0.2 - 4 mm2 24 - 12 24 A 20 A 500 V 300 V 6 kV 3 Std. Pack CSA Std. Pack 10 10 100 Std. Pack 100 pending ? 24 - 12 600 V Type Part No. APFN 2,5 E 07.312.7355.0 Std. Pack 10 fasis Accessories for fasis WTP 2,5/4... Accessories Cross connector, insulated Vertical cross connector, insulated Wire entry guide Test adapter, modular Test plug Screwdriver, uninsulated Screwdriver, uninsulated, MINI 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 20 pole 0.13 - 0.2 mm2 0.25 - 0.5 mm2 0.75 - 1.0 mm2 Type Part No. IVB WKF 2,5 - 2 IVB WKF 2,5 - 3 IVB WKF 2,5 - 4 IVB WKF 2,5 - 5 IVB WKF 2,5 - 6 IVB WKF 2,5 - 7 IVB WKF 2,5 - 8 IVB WKF 2,5 - 9 IVB WKF 2,5 - 10 IVB WKF 2,5 -20 IVB WKF V LELN 2,5/1 WEISS LELN 2,5/2 GRAU LELN 2,5/3 SCHWARZ PS WKC/F ST 2/2,3 DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 Z7.261.1127.0 05.564.3755.0 05.564.3855.0 05.564.3955.0 Z1.299.9753.0 Z5.553.2921.0 06.502.4000.0 06.502.5000.0 Std. Pack 10 10 10 10 10 20 20 20 20 20 20 100 100 100 10 10 5 10 119 Accessories Accessories Software Service 120 Accessories Accesories and Service To complement our products, we offer a comprehensive portfolio of accessories and services for terminal blocks. Wieland offers a variety of product-specific accessories for its terminal blocks, for example covers and isolating plates as well as assembly materials such as mounting rails or tools for working with our products. Marking solutions such as wieplot and wiemarc for DIN rail terminal blocks and other components in the control cabinet, the planning software wieplan for design of rail assemblies, and our value-add service for rail assemblies, all make working with Wieland DIN rail terminal blocks effortless, and achieve a true added value. 121 Accessories Shielded cable terminals, type SKN With the SKN shielding connection clamps for our rail terminal blocks, we offer the ability to connect shielded cables and wires in the control cabinet to the grounding system in a safe and easy manner. Application * Mounting directly in front of the terminal blocks through use of a rail holder that attaches to the mounting rail * Mounting on insulated rail holders independent of the DIN mounting rail, inside the control cabinet The system * Easy and secure contact without damaging the shield * Stainless spring steel compression clamp ensures continuous and consistent contact * High corrosion resistance of contact parts * Spring clamping yoke available in various sizes * Plastic rail holder for insulated rail mounting SKN... * Shielded cable terminals * Material: nickel-plated brass Description Type Part No. Shielded cable terminals Shielded cable terminals Shielded cable terminals Shielded cable terminals SKN1,5-6,5 SKN5-11 SKN10-17 SKN16-24 Z2.803.1328.0 Z2.803.1428.0 Z2.803.1528.0 Z2.803.1628.0 Type Clamping B L Hmax (shielded cable diameter) 122 SKN1,5-6,5 8-13 N 10 mm 25 mm 33,5 mm SKN5-11 22-31 N 17 mm 25 mm 41 mm SKN10-17 32-58 N 23 mm 25 mm 57 mm SKN16-24 37-53 N 30 mm 25 mm 71 mm Std. Pack 10 10 10 10 Accessories Accessories Busbar support (one-sided), tin-plated steel Busbar support (two-sided), tin-plated steel Busbar support (one-sided), tin-plated steel Busbar support (two-sided), tin-plated steel Busbar support plastic, black Busbar support * Tin-plated steel Type Part No. WE SH 1/35 WE SH 2/35 WE SH 3/35 WE SH 4/35 SKN SH/35/F Z5.515.3310.0 Z5.515.3410.0 Z5.519.0310.0 Z5.519.0410.0 Z1.980.0153.0 Std. Pack 20 20 25 25 10 WE SH 1/35 WE SH 2/35 WE SH 3/35 WE SH 4/35 * Plastic, black SKN SH/35/F Type Accessories Ground terminal, tin-plated steel green-yellow WAK 35/4GN Busbar, Cu tin-plated ,18x3 mm L = 1 m 18 x 3MSN Accessories Part No. 30.494.4210.7 98.291.1000.0 Std. Pack 10 10 WAK 35/4GN 123 Accessories Mounting rails Mounting rail 35 x 7,5 according to DIN EN 60 715 * Length 2 m Mounting rail 35 x 15 according to DIN EN 60 715 * Length 2 m Mounting rail 35 x 15 according to DIN EN 60 715 * Length 2 m 124 Description Type Steel, galv. zinc-plated and dichromated unslotted 35 x 27 x 7,5 EN 60715 Steel, galv. zinc-plated and dichromated slotted 35 x 27 x 7,5 EN 60715 Steel, unplated unslotted 35 x 27 x 7,5 EN 60715 Description Type Steel, galv. zinc-plated and dichromated unslotted 35 x 27 x 15 EN 60715 Steel, galv. zinc-plated and dichromated slotted 35 x 27 x 15 EN 60715 Steel, galv. zinc-plated and dichromated slotted 35 x 27 x 15 EN 60715 Steel, V2A slotted 35 x 27 x 15 EN 60715 Description Type Steel, galv. zinc-plated and dichromated unslotted 35 x 24 x 15 EN 60715 Steel, hot-galvanized unslotted 35 x 24 x 15 EN 60715 ZN E-copper unslotted 35 x 24 x 15 EN 60715 CU Part No. 98.300.0000.0 98.300.1000.0 98.300.0010.0 Part No. 98.370.0000.0 98.370.1000.0 98.375.1000.0 98.370.1001.0 Part No. 98.360.0000.0 98.360.0004.0 98.380.0000.0 Std. Pack 1 1 1 Std. Pack 1 1 1 1 Std. Pack 1 1 10 Accessories Mounting rail 15 x 5,5 according to DIN EN 60 715 * Length 2 m Mounting rail 15 x 5,5 according to DIN EN 60 715 * Length 2 m Description Type Part No. Steel, galv. zinc-plated and dichromated unslotted 9021 / 15 x 5,5 EN 60715 Steel, galv. zinc-plated and dichromated slotted 9021 / 15 x 5,5 EN 60715 Description Type 98.090.0015.0 98.090.0000.0 Part No. Steel, galv. zinc-plated and dichromated unslotted 9006 EN 60715 G-32 Steel, galv. zinc-plated and dichromated slotted 9006 EN 60715 G-32 E-copper unslotted 9006 E-CU Aluminium unslotted 9006 AL 98.190.0000.0 98.190.1000.0 98.220.0000.0 98.210.0000.0 Std. Pack 10 1 Std. Pack 1 1 10 1 Accessories Accessories Angled support bracket with mounting material Angled support bracket with mounting material Angled support bracket with mounting material Type Part No. 9018 D 9018 H 9018 N Z5.516.2511.0 Z5.516.2711.0 Z5.516.2811.0 Std. Pack 50 50 50 125 Accessories End clamps End clamp for TS 35 snap-on mounting End clamp for TS 35 snap-on mounting Description End clamp TS 35 Description End clamp TS 35 End clamp TS 35 with marking facilities End clamp TS 35 with marking facilities Type 5 mm wide WEF 2 /35 Type 8 mm wide WEF 1 /35 17,5 mm wide WEF 1 BS /35 8 mm wide WEF 1 BSS /35 Type Accessories Marking tag for WEF 1 / 35 wide BS/R Marking cardboard in perforated sheets 100 tags/sh. Marking tag for WEF 1 / 35 small Marking cardboard in perforated sheets small End clamp for TS 35 screw mounting Description End clamp TS 35 End clamp TS 35 Type 8 mm wide 9708/2 S 35 17,5 mm wide 9708/2 BS 35 Type Accessories Marking cardboard in perforated sheets 100 tags/sh. 126 Part No. Z5.523.9453.0 Part No. Std. Pack 100 Std. Pack Z5.523.9353.0 69.920.1053.0 100 100 69.920.1253.0 100 Part No. Z4.243.8453.0 04.019.0289.0 04.243.8550.0 04.019.1189.0 Part No. Z5.522.8553.0 69.920.0553.0 Part No. 04.019.0289.0 Std. Pack 100 10 10 10 Std. Pack 100 100 Std. Pack 10 Accessories End clamp with with U-foot screw mounting Description End clamp with U-foot End clamp with U-foot with marking facilities End clamp with U-foot End clamp with U-foot with marking facilities Type Description End clamp, plastic End clamp, steel Std. Pack 10 mm wide WE 1 /U 17,5 mm wide WE 1 BS /U Z5.523.5753.0 69.920.0753.0 100 100 10 mm wide WE 2 /U 17,5 mm wide WE 2 BS /U Z5.523.5653.0 69.920.0653.0 100 100 Type Accessories Marking cardboard in perforated sheets 100 tags/sh. End clamp for TS 15 screw mounting Part No. Type 7,5 mm wide 9208 S 15 5 mm wide 9222 S 15 Part No. 04.019.0289.0 Part No. Z5.522.7553.0 Z5.522.5010.0 Std. Pack 10 Std. Pack 100 100 127 Accessories Configuration and marking systems Individual marking of DIN rail terminal blocks means wiemarc and wieplot at Wieland Electric. The wiemarc software was developed to provide you with maximum flexibility in marking your terminal block assemblies. Together with the wieplot plotter you have a powerful marking system that enables you to work professionally from the individual marking tag to series marking of your terminal block assemblies. You feel confident with the system due to its easy handling and visual representation of your marking, even when you use it for the first time. But wieplot offers even more! In addition to the marking tags for DIN rail terminal blocks you can also print self-adhesive tags and labels or cable markings. A slight modification can even make your plotter a powerful engraving system. selos - fasis Marking with a system * Individual marking of all terminal blocks for clear wire/ termination point assignment * One single marking system for all designs * Marking of individual tags; marking strips that correspond to the exact widths of the terminal blocks; or group markings * Individual planning of terminal block assemblies and markings with wieplan wieplot Ready for universal use * Marks all common marking systems available for DIN rail terminal blocks * Different marking tags can be marked individually in one single work step * Marking of labels, self-adhesive tags and cables is possible wiemarc Easy and quick * Simple and intuitive user interface * Direct graphical display of the marking tags including plausibility check * Customized layouts can be created individually * Data import from CAD, Excel, text or wieplan files wieplot engraving system Durable and safe - wieplot engraving system * Easy modification to wieplot to make it an engraving system * Engraving of multi-layer plastic boards * Clean and dust-proof operation due to integrated vacuum device * Create individual layouts using wiemarc 128 Accessories Plotter system wieplot Description Type Part No. Complete package Complete package wieplot 500 wieplot BASIC 95.502.0604.0 95.502.0607.0 Std. Pack 1 1 Contents: Plotter wieplot, data cable and manual, 4 receptacles (wieplot 500) / 2 receptacles (wieplot BASIC) for WSB (Wieland standard marking system), accessories kit, wiemarc software Description: With wiemarc you can create customized marking data on your PC. These can then be output on the wieplot plotter system to various marking plates. Technical data: Resolution: Accuracy: Power supply unit: Output voltage: Current input: Approval: Radio interf. suppr.: Dim. / Weight: Interfaces: Accessories for wieplot Engraving unit for wieplot 500 0.01 mm + / - 0.05 mm 50 / 60 Hz, 100 - 240 V 24 V DC 1.4 A app. 0.3 A at 220 V UL-UL1950, CSA 950, VDE EN 60950 FCC class B, FCC sect. 15 and VDE class B 660 mm x 440 mm x 125 mm / 8 kg (wieplot 500) USB Level 1.1, parallel Plotter pens for wieplot Plotter pen 0.18 mm Plotter pen 0.25 mm Plotter pen 0.35 mm Plotter pen 0.50 mm Plotter pen 0.70 mm Plotter pen 1.00 mm Dispos plotter pen 0.25 mm Dispos plotter pen 0.35 mm Dispos plotter pen-D ED 0.25 mm Dispos plotter pen-D ED 0.35 mm Part No. Type Part No. 95.502.0118.0 95.502.0125.0 95.502.0135.0 95.502.0150.0 95.502.0170.0 95.502.0100.0 95.502.0125.1 95.502.0135.1 95.502.0225.1 95.502.0235.1 Ink cartridge P2.0, 5 x1ml Cleaning set Pen cleaner Dust protection hood Service kit - pen station Seal inserts kit 95.502.0199.0 95.502.0198.0 95.502.0197.0 95.502.0612.0 95.502.0613.0 Receptacles for marking plates Type Part No. Receptacle for WSB Receptacle for BZ/WKF 15, Receptacle for BZ/WKF 1,5/10 95.502.0620.0 95.502.0627.0 95.502.0628.0 Description Type Part No. Engraving unit wieplot 500 E-UNIT 95.502.0700.0 Std. Pack 1 Contents: Engraving spindle, engraving head (with fuse and counter bearing), control unit wieplot VEC 500, vacuum cleaner wieplot VC 500, connection cables Description: The wieplot 500 E-UNIT engraving unit has been designed for use with the wieplot 500 plotter. The system is set up for engraving multi-layer plastic tags. The Plotboard A4 in a 297 x 202 mm format is the receptacle for marking paper sheets and labels and also enables engraving of plastic boards. Marking computer marcom 2 Accessories Graver SET, complete Graver Graver Graver Graver Graver Graver Receptacle Type Part No. SET 0.2 mm 0.3 mm 0.4 mm 0.5 mm 0.7 mm 1.0 mm Plottboard A4 95.502.0710.0 95.502.0710.2 95.502.0710.3 95.502.0710.4 95.502.0710.5 95.502.0710.7 95.502.0711.0 95.502.0625.0 Description Type Part No. Marking computer marcom 2 95.502.0000.0 Std. Pack 1 1 1 1 1 1 1 1 Std. Pack 1 Contents: Marking computer in case, european power supply unit, power pack, data cassette with job memory, marking tag carrier, plotter pen, 0.25 mm, cleaning set Description: marcom 2 is a freely programmable marking computer for DIN rail terminal blocks, pluggable connectors, switching devices and cables. The computer provides of a large number of fonts, with numerical and alphanumerical characters and symbols. marcom 2 is portable and can be used at any location; it can be operated either using the mains or batteries. Technical data: Operator panel: Resolution: Power supply unit: Output voltage: Replaceable battery: Dimensions: Weight: 190 mm x 45 mm 0.01 mm 50 / 60 Hz, 100 - 230 V 9.5 V (150 mV / 1.4 VA) - 14 V (450 mA / 6.3 VA) 16.8 V (14 NiCd-Zellen) 380 mm x 190 mm x 63 mm 6.2 kg 129 Accessories Marking accessories Marking plates Description Type Part No. Std. Pack * For marcom 2 marking computer Unmarked * For wieplot 500 plotter system Width 5 x 8.3 mm Width 5 x 14 mm 110 tags per plate 9075 A/5/10/11 60 tags per plate 9705 AL/5/10/6 Z4.242.5053.0 Z4.242.5153.0 10 10 Width 6 x 8.3 mm Width 6 x 14 mm 110 tags per plate 9075 A/6/10/11 60 tags per plate 9705 AL/6/10/6 Z4.242.6053.0 Z4.242.6153.0 10 10 Width 8 x 8.3 mm 70 tags per plate 9075 A/8/10/7 Z4.242.8053.0 10 Single marking tag All blocks / 5 mm wide and larger *) Custom marking upon request Marking strips 2,5 mm2 / 5 mm wide *) Custom marking upon request Description Type Part No. Unmarked Width 5 x 8.3 mm Width 5 x 14 mm 9705 A 9705 AL 04.242.0850.0 04.242.1553.0 500 500 Marked Width 5 x 8.3 mm Width 5 x 14 mm 9705 AB *) 9705 ALB *) 04.842.0850.0 04.842.1553.0 500 500 Description Type Part No. Unmarked 9705 A/5/10 04.242.5053.0 25 9705A/5/9 B 1 - 9 9705A/5/10 B 9705A/5/10 B 1 - 10 9705A/5/10 B 11 - 20 9705A/5/10 B 21 - 30 9705A/5/10 B 31 - 40 9705A/5/10 B 41 - 50 9705A/5/10 B 51 - 60 9705A/5/10 B 61 - 70 9705A/5/10 B 71 - 80 9705A/5/10 B 81 - 90 9705A/5/10 B 91 - 100 04.842.4953.0 04.842.5053.0 04.845.0153.0 04.845.0253.0 04.845.0353.0 04.845.0453.0 04.845.0553.0 04.845.0653.0 04.845.0753.0 04.845.0853.0 04.845.0953.0 04.845.1053.0 25 25 25 25 25 25 25 25 25 25 25 25 04.855.0053.0 04.855.0153.0 04.855.0253.0 04.855.0353.0 04.855.0453.0 04.855.0553.0 04.855.0653.0 04.855.0753.0 04.855.3153.0 04.855.3253.0 04.855.0953.0 04.855.1053.0 04.855.0853.0 25 25 25 25 25 25 25 25 25 25 25 25 25 04.242.5153.0 25 Marked 1-9 *) 1 - 10 11 - 20 21 - 30 31 - 40 41 - 50 51 - 60 61 - 70 71 - 80 81 - 90 91 - 100 g (10x) 9705A/5/10B SLZ 9705A/5/10B ERDZ 9705A/5/10 B + + (10x) - (10x) 9705A/5/10 B 9705A/5/10B L1 L1 (10x) 9705A/5/10B L2 L2 (10x) 9705A/5/10B L3 L3 (10x) 9705A/5/10B PE PE (10x) 9705A/5/10B SL SL (10x) 9705A/5/10B N N (10x) 9705A/5/10B F1 F1 (10x) 9705A/5/10B F2 F2 (10x) L1,L2,L3,N,PE (10x) 9705A/5/10B L1L2L3NPE.. q (10x) With enlarged marking area 130 9705 AL/5/10 Std. Pack Std. Pack Accessories Marking strips 4 mm2 / 6 mm wide *) Custom marking upon request Description Type Part No. Unmarked 9705 A/6/10 04.242.6053.0 25 9705A/6/9 B 1 - 9 9705A/6/10 B 9705A/6/10 B 1 - 10 9705A/6/10 B 11 - 20 9705A/6/10 B 21 - 30 9705A/6/10 B 31 - 40 9705A/6/10 B 41 - 50 9705A/6/10 B 51 - 60 9705A/6/10 B 61 - 70 9705A/6/10 B 71 - 80 9705A/6/10 B 81 - 90 9705A/6/10 B 91 - 100 04.842.5953.0 04.842.6053.0 04.846.0153.0 04.846.0253.0 04.846.0353.0 04.846.0453.0 04.846.0553.0 04.846.0653.0 04.846.0753.0 04.846.0853.0 04.846.0953.0 04.846.1053.0 25 25 25 25 25 25 25 25 25 25 25 25 04.856.0053.0 04.856.0153.0 04.856.0253.0 04.856.0353.0 04.856.0453.0 04.856.0553.0 04.856.0653.0 04.856.0753.0 04.856.3153.0 04.856.3253.0 04.856.0953.0 04.856.1053.0 04.856.0853.0 25 25 25 25 25 25 25 25 25 25 25 25 25 04.242.6353.0 25 Marked 1-9 *) 1 - 10 11 - 20 21 - 30 31 - 40 41 - 50 51 - 60 61 - 70 71 - 80 81 - 90 91 - 100 g (10x) 9705A/6/10 B SLZ 9705A/6/10 B ERDZ 9705A/6/10 B + + (10x) 9705A/6/10 B - (10x) 9705A/6/10 B L1 L1 (10x) 9705A/6/10 B L2 L2 (10x) 9705A/6/10 B L3 L3 (10x) 9705A/6/10 B PE PE (10x) 9705A/6/10 B SL SL (10x) 9705A/6/10 B N N (10x) 9705A/6/10 B F1 F1 (10x) 9705A/6/10 B F2 F2 (10x) L1,L2,L3,N,PE (10x) 9705A/6/10 B L1L2L3NPE.. q (10x) Marking strips 6 mm2 / 8 mm wide *) Custom marking upon request With enlarged marking area 9705 AL/6/10 Description Type Part No. Unmarked 9705 A/8/10 04.242.8053.0 25 9705A/8/9 B 1 - 9 9705A/8/10 B 9705A/8/10 B 1 - 10 9705A/8/10 B 11 - 20 9705A/8/10 B 21 - 30 9705A/8/10 B 31 - 40 9705A/8/10 B 41 - 50 9705A/8/10 B 51 - 60 9705A/8/10 B 61 - 70 9705A/8/10 B 71 - 80 9705A/8/10 B 81 - 90 9705A/8/10 B 91 - 100 04.842.7953.0 04.842.8053.0 04.848.0153.0 04.848.0253.0 04.848.0353.0 04.848.0453.0 04.848.0553.0 04.848.0653.0 04.848.0753.0 04.848.0853.0 04.848.0953.0 04.848.1053.0 25 25 25 25 25 25 25 25 25 25 25 25 04.858.0053.0 04.858.0153.0 04.858.0253.0 04.858.0353.0 04.858.0453.0 04.858.0553.0 04.858.0653.0 04.858.0753.0 04.858.3153.0 04.858.3253.0 04.858.0953.0 04.858.1053.0 04.858.0853.0 25 25 25 25 25 25 25 25 25 25 25 25 25 Marked 1-9 *) 1 - 10 11 - 20 21 - 30 31 - 40 41 - 50 51 - 60 61 - 70 71 - 80 81 - 90 91 - 100 g (10x) 9705A/8/10 B SLZ 9705A/8/10 B ERDZ 9705A/8/10 B + + (10x) 9705A/8/10 B - (10x) 9705A/8/10 B L1 L1 (10x) 9705A/8/10 B L2 L2 (10x) 9705A/8/10 B L3 L3 (10x) 9705A/8/10 B PE PE (10x) 9705A/8/10 B SL SL (10x) 9705A/8/10 B N N (10x) 9705A/8/10 B F1 F1 (10x) 9705A/8/10 B F2 F2 (10x) L1,L2,L3,N,PE (10x) 9705A/8/10 B L1L2L3NPE.. q (10x) Marking strips 10 mm2 / 10 mm wide 16 mm2 / 12 mm wide 35 mm2 / 16 mm wide 70 mm2 / 24 mm wide Std. Pack Std. Pack Description Type Part No. 10 mm2 / 10 mm wide for 5 blocks 9705 A/5/10/5 B 04.842.5553.0 25 16 mm2 / 12 mm wide for 5 blocks 9705 A/6/10/5 B 04.842.6553.0 25 35 mm / 16 mm wide for 5 blocks 9705 A/8/10/5 B 04.842.8553.0 25 70 mm2 / 24 mm wide for 4 blocks 9705 A/8/10/5 B 04.842.8553.0 25 2 Std. Pack Specify required marking with part no. 131 Accessories Marking accessories Tear-off marking strips marked with numbers * With 10 marking tags * For single symbol marking Tear-off marking strips marked with upper case letters * With 10 marking tags * For single symbol marking Tear-off marking strips marked with lower case letters * With 10 marking tags * For single symbol marking 132 Description Type Part No. Unmarked 9704 A 04.241.1150.0 25 Marked with the same number 1 2 3 4 5 6 7 8 9 0 9704 A/1 B 9704 A/2 B 9704 A/3 B 9704 A/4 B 9704 A/5 B 9704 A/6 B 9704 A/7 B 9704 A/8 B 9704 A/9 B 9704 A/0 B 04.841.1150.0 04.841.1250.0 04.841.1350.0 04.841.1450.0 04.841.1550.0 04.841.1650.0 04.841.1750.0 04.841.1850.0 04.841.1950.0 04.841.2050.0 25 25 25 25 25 25 25 25 25 25 Marked with consecutive numbers 1-0 9704 A/1-0 B 04.841.2150.0 25 Marked with the same symbols + - / . 9704 A/+ 9704 A/9704 A// 9704 A/. 04.841.7450.0 04.841.7550.0 04.841.7650.0 04.841.7750.0 25 25 25 25 Set, marked with same numbers (= 10 x 25 strips = 2.500 numbers) 111 up to 000 04.841.9050.0 1 Description Part No. Type Marked with the same upper case letters 9704 A /AG B 04.841.2250.0 A 9704 A /BG B 04.841.2350.0 B 9704 A /CG B 04.841.2450.0 C 9704 A /DG B 04.841.2550.0 D 9704 A /EG B 04.841.2650.0 E 9704 A /FG B 04.841.2750.0 F 9704 A /GG B 04.841.2850.0 G 9704 A /HG B 04.841.2950.0 H 9704 A /IG B 04.841.3050.0 I 9704 A /JG B 04.841.3150.0 J 9704 A /KG B 04.841.3250.0 K 9704 A /LG B 04.841.3350.0 L 9704 A /MG B 04.841.3450.0 M 9704 A /NG B 04.841.3550.0 N 9704 A /OG B 04.841.3650.0 O 9704 A /PG B 04.841.3750.0 P 9704 A /QG B 04.841.3850.0 Q 9704 A /RG B 04.841.3950.0 R 9704 A /SG B 04.841.4050.0 S 9704 A /TG B 04.841.4150.0 T 9704 A /UG B 04.841.4250.0 U 9704 A /VG B 04.841.4350.0 V 9704 A /WG B 04.841.4450.0 W 9704 A /XG B 04.841.4550.0 X 9704 A /YG B 04.841.4650.0 Y 9704 A /ZG B 04.841.4750.0 Z Set, marked with same upper case letters (= 26 x 25 strips = 6.500 numbers) A up to Z GB 04.841.9150.0 Description Type Part No. Marked with the same lower case letters 9704 A /AK B 04.841.4850.0 a 9704 A /BK B 04.841.4950.0 b 9704 A /CK B 04.841.5050.0 c 9704 A /DK B 04.841.5150.0 d 9704 A /EK B 04.841.5250.0 e 9704 A /FK B 04.841.5350.0 f 9704 A /GK B 04.841.5450.0 g 9704 A /HK B 04.841.5550.0 h 9704 A /IK B 04.841.5650.0 i 9704 A /JK B 04.841.5750.0 j 9704 A /KK B 04.841.5850.0 k 9704 A /JK B 04.841.5950.0 l 9704 A /MK B 04.841.6050.0 m 9704 A /NK B 04.841.6150.0 n 9704 A /OK B 04.841.6250.0 o 9704 A /PK B 04.841.6350.0 p 9704 A /QK B 04.841.6450.0 q 9704 A /RK B 04.841.6550.0 r 9704 A /SK B 04.841.6650.0 s 9704 A /TK B 04.841.6750.0 t 9704 A /UK B 04.841.6850.0 u 9704 A /VK B 04.841.6950.0 v 9704 A /WK B 04.841.7050.0 w 9704 A /XK B 04.841.7150.0 x 9704 A /YK B 04.841.7250.0 y 9704 A /ZK B 04.841.7350.0 z Set, Marked with the same lower case letters (= 26 x 25 strips = 6.500 numbers) a up to z KB 04.841.9250.0 Std. Pack Std. Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1 Std. Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1 Accessories Assortment box * For marking material Marking tag carrier * For all blocks Partition * With marking facilities Description Type Part No. Std. Pack Assortment box for 5 mm width Assortment for 5 mm width S0 1/5 1-100 9705 A/5/10 B 101-200 9705 A/5/10 B 04.900.2053.0 04.855.1153.0 04.855.1253.0 1 1 1 Assortment box for 6 mm width Assortment for 6 mm width S0 1/6 1-100 9705 A/6/10 B 101-200 9705 A/6/10 B 04.900.3053.0 04.856.1153.0 04. .1253.0 1 1 1 Assortment box for 8 mm width Assortment for 8 mm width S0 1/8 1-100 9705 A/8/10 B 101-200 9705 A/8/10 B 04.900.4053.0 04.858.1153.0 04.858.1253.0 1 1 1 Assortment box for tear-off marking tags with 50 digits each S0 1/0 04.900.1053.0 1 Assortment box, empty S0 1 04.900.0000.0 1 Description Type Part No. Marking tag carrier, 4 digits 9705 A/4 04.242.0950.0 200 Marking tag carrier, 6 digits 9705 A/6 04.242.1250.0 200 Marking tag carrier, 45 angle 9705 A/4 W 04.242.2853.0 200 Description Type Part No. Std. Pack Std. Pack Partition with carrier for marking tags for TS 32 and TS 35 for TS 15 Z7.311.1755.0 Z7.311.2755.0 10 10 Partition with carrier for marking cards for TS 32 and TS 35 Z7.311.7055.0 10 Accessories Marking card in perforated sheets 04.019.0289.0 10 100 tags/sheets 133 Accessories Cross connectors and jumper bars Cross connectors * Cross connector poles can be individually removed. Description Type Part No. 1.5 mm , 4 mm wide IVB WKF 1,5-2 IVB WKF 1,5-3 IVB WKF 1,5-4 IVB WKF 1,5-5 IVB WKF 1,5-10 IVB WKF 1,5-20 Z7.260.0227.0 Z7.268.0327.0 Z7.268.0427.0 Z7.268.0527.0 Z7.268.1027.0 Z7.268.2027.0 10 10 10 10 10 10 2.5 mm2, 5 mm wide IVB WKF 2,5-2 IVB WKF 2,5-3 IVB WKF 2,5-4 IVB WKF 2,5-5 IVB WKF 2,5-6 IVB WKF 2,5-7 IVB WKF 2,5-8 IVB WKF 2,5-9 IVB WKF 2,5-10 IVB WKF 2,5-20 IVB WKF-V Z7.280.6227.0 Z7.280.6327.0 Z7.280.6427.0 Z7.280.6527.0 Z7.280.6627.0 Z7.280.6727.0 Z7.280.6827.0 Z7.280.6927.0 Z7.280.7027.0 Z7.280.8027.0 Z7.261.1127.0 10 10 10 10 10 20 20 20 20 20 10 4 mm2, 6 mm wide IVB WKF 4-2 IVB WKF 4-3 IVB WKF 4-4 IVB WKF 4-5 IVB WKF 4-6 IVB WKF 4-7 IVB WKF 4-8 IVB WKF 4-9 IVB WKF 4-10 Z7.261.1227.0 Z7.261.1327.0 Z7.261.1427.0 Z7.261.1527.0 Z7.261.1627.0 Z7.261.1727.0 Z7.261.1827.0 Z7.261.1927.0 Z7.261.2027.0 10 10 10 10 10 10 10 10 10 6 mm2, 8 mm wide IVB WKFN 6-2 IVB WKFN 6-5 Z7.282.5227.0 Z7.282.5527.0 10 10 2 * When cross connectors with removed poles are used, the rated voltage is reduced to 400 V. * You can cut a 10-wire connector plug in half to form two 5-wire connector plugs, but an end cover plate or isolating plate must then be inserted. Jumper bar, insulated Jumper comb, insulated 10 mm2, 10 mm wide IVB WKF 10-2 Z7.283.8227.0 10 16 mm2, 12 mm wide IVB WKF 16-2 Z7.284.4227.0 10 35 mm2, 16 mm wide IVB WKF 35-2 IVB WKF 35R10-2 Z7.285.6227.0 Z7.285.6427.0 10 10 Jumping cross connectors for WT 2,5, WTP 2,5/4 and WKFN 2,5 3 pole 1-3 4 pole 1-4 5 pole 1-5 5 pole 1 to 3 to 5 7 pole 1 to 3, 5 and 7 9 pole 1 to 3, 5, 7 and 9 11 pole 1 to 3, 5, 7, 9 and 11 Additional combinations upon request 99.013.9999.9 99.014.9999.9 99.015.9999.9 99.031.9999.9 99.032.9999.9 99.033.9999.9 99.034.9999.9 10 10 10 10 10 10 10 Description Part No. Type Std. Pack WK 4 / U and WK 4 TK, 6 mm wide, 0.5 mm thick Jumper comb, insulated IVB 0,5 WK 4-2 IVB 0,5 WK 4-12 Z7.255.0227.0 Z7.255.0227.0 10 10 WK 4 / U and WK 4 TK, 6 mm wide, 1 mm thick Jumper comb, insulated IVB 1 WK 4-2 IVB 1 WK 4-12 Z7.255.4227.0 Z7.255.4227.0 10 10 Z7.255.8227.0 Z7.255.8327.0 Z7.256.8427.0 Z7.256.8527.0 Z7.256.8527.0 10 10 10 10 10 WK 6, WKN 6 TK, WK 4 THSi 6,3x32 Jumper comb, insulated 134 Std. Pack IVK WKN 6 TK-2 IVK WKN 6 TK-3 IVK WKN 6 TK-4 IVK WKN 6 TK-5 IVK WKN 6 TK-6 Accessories Cover strips and test plugs Cover strip with warning symbol * Over 4 blocks, tension spring connection * Over 4 blocks, screw connection Test plug with tension spring connection * For WKF/WKC terminal blocks * For 2.5 mm2, 5 mm wide and 4 mm2, 6 mm wide Test plug * 250 V / 2 A Description Type Part No. Std. Pack for tension spring connection 1.5 mm2, 4 mm wide ADF 1,5/5 GELB 04.343.6953.8 10 2.5 mm2, 5 mm wide ADFN 2,5/4 GELB 04.343.8353.8 10 4 mm2, 6 mm wide ADF 4/4 GELB 04.343.6153.8 10 6 mm2, 8 mm wide ADF 6/4 GELB 04.343.6253.8 10 10 mm2, 10 mm wide ADF 10/4 GELB 04.343.6453.8 10 16 mm2, 12 mm wide ADF 16/4 GELB 04.343.6653.8 10 35 mm2, 16 mm wide ADF 35/5 GELB 04.343.9253.8 10 WKN 35/U, 16 mm wide, screw M5 AD 16/4 GELB 04.343.5256.8 10 WKN 70/U, 24 mm wide, screw M6 AD 24/4 GELB 04.343.5356.8 10 WKN 150/U, 28 mm wide, screw M8 ADN 28/4 GELB 04.343.5456.8 10 Description Type Part No. Test plug Blind piece Endplate PSWKC/F Z1.299.9753.0 01.299.9753.0 07.312.6053.0 for screw connection ZP/AP PS General data Width Wire strip length Technical data 5 mm / 6 mm* 8 mm IEC UL Std. Pack 10 10 10 CSA Cross section solid Cross section fine-stranded Rated current Rated voltage Note 0.13 -1.5 mm 0.13 - 1.5 mm2 13.5 A 400 V * For 6 mm spacing a ZP/AP PS is snapped on behind each test plug or blind piece. Description Type Part No. ST 2/2 RT ST 2/2 SW ST 2/2 BL ST 2/4 SW Z5.553.2921.0 Z5.553.2921.1 Z5.553.2921.6 Z5.553.3121.0 Test plug Test plug Test plug Test plug 2.3 mm 2.3 mm 2.3 mm 4 mm red black blue black 2 Std. Pack 10 50 100 10 135 Accessories Tools Wire entry guides * For conductors with cross sections smaller than 1 mm2 Notching tool for cross connectors Description Type Part No. Std. Pack 1.5 mm , 4 mm wide for 0.13 - 0.2 mm2 wires for 0.25 - 0.5 mm2 wires LEL 1,5/1 WEISS LEL 1,5/2 GRAU 05.564.4253.0 05.564.4353.0 10 10 2.5 mm2, 5 mm wide for 0.13 - 0.2 mm2 wires for 0.25 - 0.5 mm2 wires for 0.75 - 1.0 mm2 wires LELN 2,5/1 WEISS LELN 2,5/1 GRAU LELN 2,5/1 SCHWARZ 05.564.3755.0 05.564.3855.0 05.564.3955.0 100 100 100 4 mm2, 6 mm wide for 0.13 - 0.2 mm2 wires for 0.25 - 0.5 mm2 wires for 0.75 - 1.0 mm2 wires LEL 4/1 WEISS LEL 4/2 GRAU LEL 4/3 SCHWARZ 05.561.8553.0 05.561.8653.0 05.561.8753.0 100 100 100 Description Type Part No. Notching tool AKW /A 95.300.0500.0 Description Type Part No. 1.5 mm , 4 mm wide Uninsulated, long and straight DIN 5264 A 0,4x2,5 06.502.4300.0 5 2.5 mm2, 5 mm wide Uninsulated, long and straight Uninsulated, short and straight Uninsulated, long and angled Uninsulated, short and angled DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M DIN 5264 B 0,6x3,5 W DIN 5264 B 0,6x3,5 MW 06.502.4000.0 06.502.5000.0 05.502.4100.0 05.502.4000.0 10 10 10 10 4 mm2, 6 mm wide Uninsulated, long and straight Uninsulated, short and straight Uninsulated, long and angled Uninsulated, short and angled DIN 5264 B 0,6x3,5 DIN 5264 B 0,6x3,5 M DIN 5264 B 0,6x3,5 W DIN 5264 B 0,6x3,5 MW 06.502.4000.0 06.502.5000.0 05.502.4100.0 05.502.4000.0 10 10 10 10 6 mm2, 8 mm wide DIN 5264 B 0,6x4 06.502.4100.0 5 10 mm2, 10 mm wide DIN 5264 B 0,6x4 06.502.4100.0 5 16 mm2, 12 mm wide DIN 5264 B 1x5,5 06.502.4200.0 5 35 mm2, 16 mm wide DIN 5264 B 1x5,5 06.502.4200.0 5 2 Std. Pack 1 * For 1.5 mm 2, wide 4 mm wide * For 2.5 mm 2, 5 mm wide * For 4 mm 2, 6 mm wide Screwdrivers Std. Pack 2 136 Accessories Ferrules and tools Ferrules with insulating material sleeve * Materials: Sleeve: Polypropylene, temperature resistance 105 C, creepage resistant Tube: E-Cu, galvanically tin-plated without insulating material sleeve * Materials: Tube: E-Cu, galvanically tin-plated Wire strippers Crimping tool * for ferrules Cross section mm2 Color Type Ferrules with insulating material sleeve according to DIN 46 228 T4 0.50 norm. white 0.75 norm. gray 1.00 norm. res 1.50 norm. black 1.50 long black 2.50 norm. blue 2.50 long blue 4.00 norm. gray 4.00 long gray 6.00 norm. yellow 6.00 long yellow 10.00 norm. red 10.00 long red 16.00 norm. blue 16.00 long blue 25.00 mid-length yellow Part No. Std. Pack 06.600.2027.0 06.600.2127.0 06.600.2227.0 06.600.2327.0 06.600.2427.0 06.600.2527.0 06.600.2627.0 06.600.2727.0 06.600.2827.0 06.600.2927.0 06.600.3027.0 06.600.3127.0 06.600.3227.0 06.600.3327.0 06.600.3427.0 06.600.3527.0 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 Ferrules without insulating material sleeve according to DIN 46 228 T1 06.600.4027.0 0.50 norm. 06.600.4127.0 0.75 norm. 06.600.4227.0 1.00 norm. 06.600.4327.0 1.50 norm. 06.600.4427.0 2.50 norm. 06.600.4527.0 4.00 norm. 06.600.4627.0 6.00 norm. 06.600.4727.0 10.00 norm. 06.600.4827.0 16.00 norm. 06.600.4927.0 25.00 norm. 06.600.5027.0 35.00 norm. 1000 1000 1000 1000 1000 1000 500 500 100 100 100 Description Type Part No. Wire strippers AIW/A 95.350.0100.0 General data Wire strip length Cross section, AWG 0.08 - 10 mm2 28 - 7 Description Pressing tool A Pressing tool B Pressing tool C General data A: Wire strip length A: Cross section, AWG B: Wire strip length B: Cross section, AWG C: Wire strip length C: Cross section, AWG Type Length: 180 mm PW/A Length: 203 mm PW/B Length: 203 mm PW/C Part No. 95.101.1300.0 95.101.1100.0 95.101.1200.0 Std. Pack 1 Std. Pack 1 1 1 0.08 - 10 mm2 28 - 7 10 - 25 mm2 7-4 35 - 50 mm2 2 - 1/0 137 software & service wieplan - configuration software wieplan was developed to provide you with a powerful software tool for the configuration of terminal block assemblies using Wieland DIN rail terminal blocks. wieplan is available in 4 languages. It is user-friendly and its intuitive user interface guides you step by step through the entire configuration process. After you have completed your design, you have the option of ordering the fully-built assembly from Wieland. Thus wieplan helps you to save time and money. Managing projects Benefits: * To begin each configuration you automatically start from the basic project management menu. * You create new projects and are reliably guided through the easy and practice-oriented program steps. * You always have the choice of either opening an already existing project or of creating a new one. Configuring terminal block assemblies without errors Benefits: * You work with high-quality graphics viewing the terminal blocks from the top; the accessories added are visible at all time. * You continually use the plausibility check that reminds you of the accessories required such as end plates. * You are provided with a product catalog with search function; you can add your own order numbers, if required; and you can create libraries to add in your own products. Entering order data Benefits: * You enter your data such as invoice and delivery address in the order data screen only once and can use them for any follow-up orders. * You may order by e-mail; in this case the terminal block assembly data are zipped automatically. Terminal block assembly output Benefits: * You print out the order, the parts list and the drawing data, and, if required, your own order numbers. * You create a DXF file and export the current terminal block assembly to a CAD program. * You export the marking in CSV format including all marking data for further processing in wiemarc, for example. * You can use a bidirectional interface available for your CAE system EPLAN. 138 Software & Service Solution specific, value added assembly Terminal block assemblies For those who want to make their control cabinet work easier Wieland Electric pre-assembles completely equipped DIN rail terminal block assemblies, even with the cables connected, if required. Cable assemblies Individual cables tailored to your needs and combined with various components can be delivered for your project in all lengths. Control and distribution panels Our value-add departments will gladly assist you in selecting individual Wieland components, or in laying out complete panels, which we can also build for you. Interface modules - solution specific connectivity Each control cabinet requires distribution functionality. In most cases this is accomplished with standard control panel wiring (0.5 mm or 1.5 mm fine stranded with ferrule) to standardized interfaces (d-sub or ribbon cables). Upon the customer's request Wieland Electric can design individual and customized solutions for all applications, too. 139 facts & DATA Tables, technical data DIN rail terminal blocks Material selection selos and fasis Metal parts * Special alloys enable low feed-through resistance and provide a gas-tight contact area: - Current carrying bar: Copper, or brass - Clamping body and clamping screws: Galvanized and chromated steel - Clamping spring: CrNi stainless steel - Current carrying bar: Copper, tinned Plastic materials * Polyamide has excellent electrical, chemical and mechanical characteristics: - Temperature resistance: Up to 120C - Creepage resistance: CTI 600 - Flammability class: Self-extinguishing, UL94-V0 Electrical and thermal characteristics of plastic materials Key figures / characteristics Dielectric strength Dielectric loss tan _ at 1 MHz Specific feed through resistance Surface resistance Creepage Operating temperature RTI * Temperature index TI ** Minimum operating temperature without mechanical stress Flammability Standard Thermoplast Polyamide PA 666 Unit VDE 0303-T21 IEC 243/1 VDE 0303-T4 IEC 250 VDE 0303-T30 VDE 0303-T30 VDE 0303-T1 UL 746 B VDE 0304 T.21 IEC 93 IEC 93 IEC 112 x cm CTI C at 1.5 mm IEC 216-1 UL 94 kV / mm tr/lf. 55 / 45 tr./lf. 0.02 / 0.3 lf. lf. C 1012 1010 600 120 123 / 107 C -40 Class / material thickness V0 / 0.4 Suitability for tropical areas good * electrical value ** related to 50% strain resistance drop after 5,000/20,000 hours Standard cross sections of round copper conductors AWG/metric Metric size ISO mm2 0.1* 0.14* 0.2 - 0.5 0.75 1 1.5 2.5 4 6 10 * not standardized Comparison between AWG/kcmil and metric sizes AWG kcmil mm2 0.081 28 0.128 26 0.205 24 0.324 22 0.519 20 0.82 18 - - 1,3 16 2,1 14 3,3 12 5,3 10 8,4 8 Metric size ISO mm2 16 25 35 50 70 95 - 120 150 185 240 300 More information available under facts & DATA at www.wieland-electric.com 140 Comparison between AWG/kcmil and metric sizes AWG kcmil mm2 13.3 6 21.2 4 33.6 2 53.5 (1/0) 0 67.4 (2/0) 00 85 (3/0) 000 107.2 (4/0) 0000 127 250 152 300 177 350 253 500 304 600 facts & DATA Mounting rails Maximum short-time current capability assigned to mounting rails DIN EN 60 947-7-2 Rail profile Material mm2 1s kA Rated thermal current of a PEN busbar A Equivalent E-Cu cross section Short-timecurrent capability DIN rail TH 15 x 5,5 according to IEC 60 715 Steel 10 1.2 - G rail TS 32 according to IEC 60 715 Steel Copper1) Aluminium1) 35 120 70 4.2 14.4 8.4 - 269 192 DIN rail TS 35 x 27 x 7,5 according to IEC 60 715 Steel 16 1.92 - DIN rail TS 35 x 27 x 15 according to IEC 60 715 Steel 25 3 - Steel 50 6 - Copper1) 150 18 309 DIN rail TS 35 x 24 x 15 according to IEC 60 715 (made from 2.3 mm thick material) 1) Selected copper or aluminum alloys from the manufacturer of the terminal block layout were used to achieve the values in the table. Torques II Torque according to EN 60947-1 for selos DIN rail terminal blocks II applies for screws that are tightened with a screwdriver III applies for screws that can be tightened with tools other than a screwdriver III WT 2,5, width 5 mm M2.5 clamping body screw Nm 0.4 WT 4 ... , width 6 mm M3 clamping body screw Nm 0.5 WT 6 and WKN 6, width 8 mm M4 clamping body screw M3.5 screw for cross connector Nm Nm 1.2 0.8 WT 10, width 10 mm M4 clamping body screw Nm 1.2 WT 16, width 12 mm M6 clamping body screw Nm 2.0 WKN 35, width 16 mm M6 clamping body screw M5 screw for cross connector Nm Nm 2.5 2.0 3.0 2.0 WKN 70, width 24 mm M8 clamping body screw M6 screw for cross connector Nm Nm 3.5 2.5 6.0 3.0 WKN 150, width 28 mm M10 clamping body screw M8 screw for cross connector Nm Nm 4.0 3.5 10.0 6.0 141 facts & DATA SCCR Values for DIN rail terminal blocks As a result of changes to the 2005 NEC, both the operator and manufacturer of electrical equipment must comply with increased requirements related to resistance to short-circuiting of equipment. In accordance with both the NEC 2005 Article 409.110 and UL 508A, he short circuit resistance of the complete installation must now be considered. The installation`s Short Circuit Current Rating must be indicated on the equipment or control panel`s legend plate. Wieland has tested and determined individual SCCR values for their terminal blocks in connection with the widest variety of fuses. These ratings are far greater than the default values contained in UL 508A. As a result, when qualifying your installation, you have increased flexibility and accuracy when using Wieland terminal blocks. What does SCCR marking mean? The Short Circuit Current Rating (SCCR) of a component represents the maximum short circuit current level a device can safely withstand without compromising safety for installations and personnel. Article 409 on industrial control panels was added to the NEC in the 2005 edition. This article calls for all industrial control panels to be marked with a Short Circuit Current Rating. The Short Circuit Current Rating (SCCR) requirements for UL 508A came into force in April 2006. How is the SCCR marking determined? The NEC Article 409 refers to the UL 508A Supplement SB as an approved method for determining the SCCR of an industrial control panel. This specific method is outlined in Section SB4. 1. Determination of the SCCR values of individual components, for example DIN rail terminal blocks 2. Modification of the SCCR values through the use of current limiting devices per UL 508 SB 4.3 3. Selection of the lowest SCCR value from all the components SCCR for DIN rail terminal blocks in general The SCCR of a terminal block can be determined according to UL 508A using one of the following methods: 1. Use the tested SCCR value 2. Use the default SCCR value as specified in table 4.1 of UL 508 If the DIN rail terminal blocks do not have a tested SCCR, then the UL default value of 10 kA must be used. This relatively low value would limit the SCCR of the entire system to max. 10 kA. SCCR for Wieland DIN rail terminal blocks Wieland determined SCCR values for its DIN rail terminal blocks used in conjunction with fuses and circuit breakers. The resulting SCCR values are much higher than the values specified for DIN rail terminal blocks in table SB 4.1 of UL 508A. You will find the tested SCCR values for our selos and fasis product series in our customer information 0019.3, available on www.wieland-electric.com. The SCCR values are also published on the UL website (http://www.ul.com) under file number E60678. 142 facts & DATA Information about EX e Technical information * The information regarding cross sectional area and connection types pertains to unprepared wires without ferrules! Ferrules are not necessary for secure connection. Whenever ferrules are used, make sure that the tools specified by the manufacturer are used exclusively. * The voltage ratings apply to the terminals in their intended application. When different products are mounted adjacent to each other, the proper isolation distances must be adhered to. * If the ground blocks are not used in block assemblies, but are mounted to the rail as single terminal blocks, end clamps have to be used. * A detailed description of technical data, the standards requirements, and the application conditions are available in the flyer facts & DATA . ATEX regulation ? * For the use of DIN rail terminal blocks in Ex areas, the regulations of EN 60079-0 apply; whereas for increased safety Ex e the regulations of EN 60079-7 must be followed. For an approximation of the laws of the EU member states, directive 94/9/EG was created, which is generally known as ATEX 100a and which is the basis for harmonization in this field. ATEX stands for "atmoshpere explosive" while 100a refers to the corresponding article of the EC contract. * Directive ATEX 100a applies for protection against dust and gas explosions in all industrial Ex areas and in mining. The testing and certificating institutes named in directive ATEX 100a must follow accreditation procedures which are the same throughout Europe. * In accordance with EN 60070-0/60079-7 and ATEX 100a, these certifying institutes write out EC certificates for prototype tests. These prototype test certificates for components together with the corresponding quality system certification of the supplier are required to obtain the so-called ATEX approval. * In combination with the ? mark, the markings of the Wieland terminal blocks have the following meaning: ? Identification II Device group 2 Category GD Areas KEMA Name of testing institute ATEX... Certifcate, year of testing, number Mounting instructions for Ex e applications * If feed-through blocks are mounted directly adjacent to other feed-through blocks of a different size, or directly adjacent to ground blocks, the open side of the block group of the same type must be covered by an end plate or partition. * If adjacent DIN rail terminal blocks are jumpered or if jumpered DIN rail terminal blocks are positioned next to unjumpered DIN rail terminal blocks, a partition plate must be inserted between the individual terminal block groups or at the beginning and end of a laterally or longitudinally connected terminal block (group) in order to meet the specified isolation distances. Notched out and jumpering cross connectors can not be used in Ex areas. * If the terminal blocks are combined with other certified series and sizes and when their accessories are used, the required creepage distances and clearances must be adhered to. * The feed through terminal blocks and protective conductor terminal blocks are suitable for enclosures for use in explosive gas atmospheres or for use in the presence of combustible dust. For explosive gas atmospheres these enclosures must satisfy the requirements of EN 60079-0 and EN 60079-7. For combustible dust these enclosures must satisfy the requirements of EN 61241-0 and EN 61241-1 rather EN 50281-1-1. * The indicated values for the current carrying capability refer to a maximum ambient temperature of 40 C. When the terminal blocks are loaded with the maximum rated current the temperature rise will be max. 45 K. * Operating temperature range: selos WK...: -40 C ... +80 C selos WKFN: -20 C ... +80 C DQS certification for all company sectors * Quality standard as per DIN ISO 9001 in Development, Production and Assembly * Continued control of the quality standard by means of regular internal and external quality audits * Compatible with certificates of other countries: - BSI Certificate, Great Britain - SQS Certificate, Switzerland - Aib-Vincotte Certificate, Belgium - OQS Certificate, Austria 143 contacts are green gesis(R)MINI gesis(R)TOP gesis(R)LINECT Spanning various industries and products. gesis(R)LINECT gesis(R)TOP Universelles Steckverbindungssystem fur Einbauleuchten Komponenten Leuchtenanschlusskonzept Modulare Lichtlosungen. gesis(R)MINI Steckbare Elektroinstallation im Kompaktformat Standard auf hohem Niveau. Klein und stark. [B7LWHOBJHVLVB/,1(&7B'B86$LQGG 0602.1 "gesis LINECT Universal Connector System for Recessed Luminaires" 0640.1 "gesis MINI the pluggable electrical installation with a compact design" safety fasis BIT / fasis BIT-S / selos BIT interface interface 0601.1 "gesis TOP Luminaires connector concepts" interface Losungen fur den Schaltschrank fasis BIT / fasis BIT-S / selos BIT Installationsklemmen fur Installationsverteiler Sichere Systemlosungen fur die Automatisierungstechnik Katalog 2012 Katalog 2012 Sicherheit geht vor. Vielfalt gewinnt 0860.1 safety System Solutions for Automation Technology" smart Installation Schaltschranklosungen 0800.1 interface Solutions for the Control Cabinet" Heizung, Klima, Luftung [B6$)(7<B8B8LQGG 0117.0 "fasis BIT / fasis BIT-S / selosBIT DIN rail terminal blocks for junction boxes" smart Installation Komponenten fur die Steuerung von Heizung, Klima und Luftung Elektrotechnische Losungen fur den Schaltschrank Steckbare, dezentrale Elektroinstallation fur nachhaltiges Bauen Immer im Fokus. Passt immer zusammen. 0402.1 "Components for heating, ventilation, and air conditioning 0408.1 "smart Installation Pluggable, decentralized electrical installation for sustainable building" Produktubersicht Corporate Sustainability 0401.1 "Electro-technical solutions for the control cabinet Auf grune Zukunft bauen. Global Compact Report Wieland Division Umwelterklarung Standorte Bamberg und Gerach Der Systempartner in der Automatisierungstechnik und in der Gebaudesystemtechnik Corporate Sustainability 2012 0009.0 " Wieland apprenticeship 0910.1 "Corporate Sustainability Auf der Erfolgsstrae." Environmental Statement Bamberg and Gerach locations" 144 0902.1 " The system partner in automation technology and in building automation technology" gesis(R)ELECTRONIC contacts are green gesis(R)ELECTRONIC Dezentrale Gebaudeautomation per plug & play Katalog 2012 0600.1 "gesis CON GST 18 Electrical installation of buildings via plug & play Building and installation techn. 0700.1 "gesis ELECTRONIC Decentralized building automation with plug & play" gesis(R)SOLAR gesis(R)RAN Automation technology Further documents and brochures can be downloaded quickly and easily via the Download Center on our homepage. Industries gesis(R)SOLAR Elektrische Installationstechnik fur Photovoltaik gesis(R)RAN Dezentral installierbare Elektronik-Verteiler fur die Gebaudeautomation Katalog Intelligent verteilen. 0409.1 "gesis RAN Decentralized installable electronic distributer for building automation" 0710.1 "gesis SOLAR Electrical Installation Technology for Photovoltaics" Wieland connects. Wieland 100 years in Bamberg. Wieland is one of the most important employers in Bamberg and the surrounding area. The book portrays the life of the company`s founder Friedrich H. ("Fritz") Wieland and the following generations, closely intertwined with the company`s history. Available in bookshops. 145 Support Hotline - one call is all it takes Our DIN rail terminal blocks hotline +49 951 9324991 our e-mail-service AT.TS@wieland-electric.com is available to answer all your questions on the subject of DIN rail terminal blocks. Wieland e-Catalog For further technical information and the latest news on DIN rail terminal blocks, go to: https://eshop.wieland-electric.com 146 contacts are green Our subsidiaries ... and the addresses of our representations worldwide are available at: www.wieland-electric.com USA Wieland Electric Inc. North American Headquarters 2889 Brighton Road Oakville, Ontario L6H 6C9 Phone +1 905 8298414 Fax +1 905 8298413 www.wielandinc.com CANADA Wieland Electric Inc. North American Headquarters 2889 Brighton Road Oakville, Ontario L6H 6C9 Phone +1 905 8298414 Fax +1 905 8298413 www.wieland-electric.ca GREAT BRITAIN Wieland Electric Ltd. Riverside Business Centre, Walnut Tree Close GB-Guildford /Surrey GU1 4UG Phone +44 1483 531213 Fax +44 1483 505029 sales@wieland.co.uk FRANCE Wieland Electric SARL. Le Cerame Hall 6 47, avenue des Genottes CS 48313 95803 Cergy-Pontoise Cedex Phone +33 1 30320707 Fax +33 1 30320714 infos@wieland-electric.fr SPAIN Wieland Electric S.L. C/ Maria Auxiliadora 2 bajos E-08017 Barcelona Phone +34 93 2523820 Fax +34 93 2523825 ventas@ wieland-electric.com ITALY Wieland Electric S.r.l. Via Edison, 209 I-20019 Settimo Milanese Phone +39 02 48916357 Fax +39 02 48 920685 info@wieland-electric.it POLAND Wieland Electric Sp. Zo.o. w. Antoniego 8 62-080 Swadzim Phone +48 61 2225400 Fax +48 61 8407166 office@wieland-electric.pl CHINA Wieland Electric Trading Unit 2703 International Soho City 889 Renmin Rd., Huang Pu District PRC- Shanghai 200010 Phone +86 21 63555833 Fax +86 21 63550090 info-shanghai@wieland-electric.cn DENMARK Wieland Electric A/S Valloraekken 26 DK-4600 Koge Phone +45 70 266635 Fax +45 70 266637 sales@wieland-electric.dk BELGIUM ATEM - Wieland Electric NV Bedrijvenpark De Veert 4 B-2830 Willebroek Phone +32 3 8661800 Fax +32 3 8661828 info.belgium@wieland-electric.com F Informational material for ordering and for downloading from our websites Subject to technical modifications! gesis(R), podis(R), samos(R) are registered trademarks of Wieland Electric GmbH 147 Industrial technology Headquarters: Wieland Electric GmbH Brennerstrae 10 - 14 96052 Bamberg, Germany Sales and Marketing Center: Wieland Electric GmbH Benzstrae 9 96052 Bamberg, Germany Phone +49 951 9324-0 Fax +49 951 9324-198 www.wieland-electric.com www.gesis.com info@wieland-electric.com Solutions for the control cabinet * DIN rail terminal blocks - Screw, tension spring or push-in connection technology - Wire cross sections up to 240 mm2 - Numerous special functions - Software solutions interfacing to CAE systems * Safety - Safe signal acquisition - Safety switching devices - Modular safety modules - Compact safety controllers - Application consulting and training * Network engineering and fieldbus systems - Remote maintenance via VPN industrial router and VPN service portal - Industrial Ethernet switches - PLC and I/O systems, standard and increased environmental conditions * Interface - Power supply units - Overvoltage protection - Coupling relays, semiconductor switches - Timer relays, measuring and monitoring relays - Analog coupling and converter modules - Passive interfaces Solutions for field applications * Decentralized installation and automation technology - Electrical installation for wind tower - Fieldbus interfaces and motor starters * Connectors for industrial applications - Rectangular and round connectors - Aluminum or plastic housings - Degree of protection up to IP 68 - Current-carrying capacity up to 100 A - Connectors for hazardous areas - Modular, application-specific technology PC board terminals and connectors - Screw or spring clamp connection technology - Spacings: 3.5 mm to 10.16 mm - Reflow or wave soldering process Building and installation technology * Building installation systems - Main power supply connectors IP 20/IP 65 ... IP 68 - Bus connectors - Low-voltage connectors - Power distribution system with flat cables - Distribution systems - Bus systems in KNX, LON and wireless technology - DIN rail terminal blocks for electrical installations - Overvoltage protection 0500.1 C 02/13