TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 1/13 1. Scope : This specification applies for the RM series of thick film chip resistors made by TA-I. 2. Construction: Conductor : Over Coat (Lead-free or with lead ) Sn Plating Resistive Element Ni Plating Ceramic Substrate 3. Type Designation: RM 10 Product Code RM : Chip Resistor J Size TN Tolerance Packaging Power Rating 103 Nominal Resistance 02-0201(0603) 1/20W J-5% T-Paper Tape 04-0402(1005) 1/16W G-2% E-Embossed Tape 06-0603(1608) 1/10W F-1% B-Bulk Cassette 10-0805(2012) 1/8W D-0.5% 12-1206(3216) 1/4W B-0.1% 3 digits, e.g.,: (E-24) 103 = 103 = 10k 0 = 0 +N: Lead-Free 4 digits, e.g., : 20-2010(5025) 1/2W Special (E-96) 1540 = 154 25-2512(6432) 1 W L : 06 - 2mm pitch 13-1210(3226) 1/3w 43R2 = 43.2 paper Tape TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 2/13 4. Dimensions: UNIT: mm d t Type L W C RM02 0.600.03 0.300.03 0.10.05 0.150.05 0.250.05 RM04 1.00 0.500.05 0.200.10 0.250.10 0.350.05 RM06 1.600.10 0.800.10 0.300.20 0.30 RM10 2.000.10 1.250.10 0.400.20 0.400.20 0.500.10 RM12 3.100.10 1.550.10 0.500.30 0.400.20 0.600.10 RM13 3.100.10 2.550.10 0.500.30 0.400.20 0.600.10 RM20 5.000.15 2.500.15 0.600.30 0.500.25 0.600.10 RM25 6.300.20 3.200.20 0.600.30 0.500.25 0.600.10 +0.1 -0.05 +0.2 0.450.10 -0.1 TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 3/13 5. Ratings & Characteristics : Type Power Max. Max. Rating Rating Working Over- Load Voltage at 70 Voltage Voltage RM02 1/20W Refer 5.2 25V 50V RM04 1/16W Refer 5.2 50V 100V RM06 1/10W Refer 5.2 50V 100V Resistance Range() T.C.R (PPM/) Refer 5.2 1/8W 200 +500 -200 100 Refer 5.2 1/4W 1/3W Refer 5.2 150V 300V 200V 400V 200V 400V Refer 5.2 1/2W 200V 400V Refer 5.2 1W 200V 400V J(5%) E-24 10-1M 10-10M 10-1M 10-10M 10-10M 10-10M 1-9.1 10-560k 10-1M 1-9.1 10-1M 10-10M 10-10M 1-9.1 1-9.1 10M<R20M 10-1M 10-10M 400 1-9.1 1-9.1 10-560k 10-1M 1M<R10M 10-10M 400 1-9.1 1-9.1 10-1M 1M<R10M 10-10M 400 1-9.1 1-9.1 10-1M 10-10M 1-9.1 10M<R20M 10-10M 1-9.1 10M<R20M 10-1M 200 1M<R10M 10-10M 400 1-9.1 1-9.1 10-560k 10M<R20M 10-1M 200 10-560k 10-10M 1-9.1 10-1M 200 10-560k 1-9.1 10-1M 1M<R10M 10-560k 1-9.1 1M<R10M 100 RM25 G(2%) E-24 200 100 RM20 10-200k 400 100 RM13 F(1%) E-96 10-1M 200 100 RM12 D(0.5%) E-96 200 100 RM10 B(0.1%) E-96 10-1M 10-10M 1-9.1 10M<R20M 10-1M 200 1M<R10M 10-10M 400 1-9.1 1-9.1 10-10M 1-9.1 10M<R20M O THICK FILM CHIP RESISTORS Type RM02 RM04 RM06 RM10 RM12 RM13 RM20 RM25 Rated Current 0.5A 1A 1A 2A 2A 2A 2A 2A Max Overload Current 1A 2.5A 2.5A 5A 5A 5A 5A 5A Resistance Range 50m MAX 50m MAX 50m MAX 50m MAX 50m MAX 50m MAX 50m MAX 50m MAX 2. Operating Temp(): : -55 +125 Note : Except for the above standardized products, we also provide the customized products. TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 4/13 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. P max. 100 Power ratio ( % ) 50 0 -55 50 70 100 125 Ambient Temp. ( C ) Figure 1 5.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P*R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() E.G. : What is RM06JTN102 the rated voltage ? RM06JTN102 E= P:1/10W 0.1(W) * 1000() ; R:102 = 1K = 1000 = 10 (V) TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 5/13 6.Reliability Tests: (As specified in JIS C 5202) Reference standard Test Items Temperature Resistance Coefficient of JIS-C5202-5.2 Condition of Test Test Limits +25 +125 Refer 5.0 (1% + 0.05 ) Remarks : 0201 : (3% + 0.1 ) 0402 : (2% + 0.1 ) 0 : 50m or less Short Time Overload JIS-C5202-5.5 2.5 X rated voltage Intermittent Overload JIS-C5202-5.8 3.0 X rated voltage or Max Overloading (5.0% + 0.1) voltage ,1sec "ON" , 25sec "OFF" , 10000 cycles (Remarks : 0201 / 0402 2.5 X RCWV * ) 0 : 50m or less for 5 sec 1000 hours at rated voltage, 70 , 1.5hours "ON ", 0.5hour "OFF" 0.5%,1%:(1.0%+0.05) 2%,5%:(3.0%+0.1) Remarks : 0201 : (5.0%+0.1) 0402 : (3.0%+0.1) 0 : 100m or less 1000 hours at rated voltage , 402, 90~95% RH 1.5hours "ON ", 0.5hour "OFF" 0.5%,1%:(1.0%+0.05) 2%, 5%:(3.0%+0.1) Remarks : 0201: (5.0%+0.1) 0402: (3.0%+0.1) 0 : 100m or less Without mechanical damage Rapid Change of Temperature JIS-C5202-7.4 -55 (30 min. ) / +155 (30 min. ) 5 cycles 0.5%,1%:(0.5%+0.05) 2%, 5%:(1.0%+0.05) Remarks : 0201: (3.0%+0.1) 0 : 50m or less Solderability 2455 solder, 20.5 sec dwell. Solder : Sn96.5 / Ag3.0 / Cu0.5 At least 95% of surface area of electrode shall be covered with new solder. 3mm deflection 0.5%,1%:(0.5%+0.05) 2%,5%:(1.0%+0.05) Remarks : 0201 (1.0%+0.1) 0: 50m or less Load Life JIS-C5202-7.10 Load Life with Humidity Robustness (Bending) JIS-C5202-7.9 JIS-C5202-6.11 of Termination JIS-C5202--6.1 Dielectric Withstanding JIS-C5202-5.7 Voltage (Voltage Proof) Applying voltage : 0201 : 50V , 0402 & 0603 : 300V 500V for a minute . Insulation Resistance Applying voltage 100V for 1 minute. Remark : 0201 50V 1G 1255 for 964Hrs 0.5%,1%:(1.0%+0.05) 2%,5%:(2.0%+0.1) Remark 0201 : (2.0%+0.1) 0: 50m or less 270 5 solder , 10 1 sec dwell . 0.5%,1%:(0.5%+0.05) 2%, 5%:(1.0%+0.05) Remarks : 0201 (3.0%+0.1) 0: 50m or less Resistance to Dry Heat Resistance to Solder Heat JIS-C5202-5.6 JIS-C5202-7.2 JIS-C5202-6.10 The other No abnormalities such as flashover, burning dielectric breakdown shall appear. TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 6/13 Component , Lead-Free Soldering part 8 : Solder Heat Resistance Test for SMD. LeadFree Soldering " Whisker SONY SS-00254-8 Temp. Cycles : -35 5 / 125 5 , Keep 7 min Testing duration : 5004 hours Temp. Humidity Chambers: Temperature : 85 Humidity : 85% RH Testing duration : 5004 hours Whisker formation : 50 um or less . . Component , Lead-Free Soldering part 5 : Solder Heat Resistance Test for SMD. LeadFree Soldering " Resistance to Solder Heat SONY SS-00254-5 Flow Solder : Pre - heat : 100 to 105 305 sec Temperature : 2603 10 +1/ -0 sec The entire sample shall be dipped in solder. The specimen shall be stored at standard atmospheric conditions for 1 hour . Electrical characteristics shall be Satisfied . Without distinct deformation in appearance Iron Solder : Bit temperature : 350 10 Application time of soldering iron : 3 +1/- 0sec Apply the soldering iron to the electrode . The specimen shall be stored at standard atmospheric conditions for 1 hour , after which the measurements shall be made Note* : RCWV : Rated continuous working voltage . 7. Marking 7.1 2% & 5%(E24) Resistance value is expressed by 3 digits, the first two digits represent the significant figures of nominal resistance value in, and the third digit represents exponent for base of 10. E.G. :, 472 = 47x102 = 4700 = 4.7K 7.2 1% (E96 ) Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in, and the fourth digit represents exponent for base of 10. E.G. : 4701 = 470x101 = 4700 = 4.7K TA-I TECHNOLOGY CO., LTD TA-I 7.3 Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 7/13 1%(RM06/E96) When the marking space is too small in such small-sized resistors as RM06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. Symbol for E96 series nominal resistance value Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 Symbol 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 Symbol for multipliers Symbol A B C D multipliers 100 101 102 103 E.G : 02C = 102x102 = 10.2k Symbol 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 E 104 F 105 E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 G 106 Symbol 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 H 107 X 10-1 E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Y 10-2 Z 10-3 Notes : When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series is used as mark . E.G. : 0603 , 120 , 1% 7.4 Marking is 121 1%( E96/3digitals) The resistance value by 3 digits is requirement for customer. 7.5 No Marking for RM04 TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 8/13 8. Taping & Reel : 8.1 Taping Dimensions 8.1.1 4 mm pitch paper: Packing Type Paper RM06 RM10 RM12 RM13 8.1.2 RM02 RM04 RM06 8.1.3 Packing Type Emboss RM20 RM25 B 1.90.1 1.60.15 2.40.2 2.00.15 3.60.2 2.80.2 3.60.2 W F E P1 P2 P0 D0 T 0.640.1 8.00.2 3.50.05 1.750.1 F E 4.00.1 2.00.05 4.00.1 +0.1 1.5 -0 0.840.1 2 mm pitch paper : Packing Type Paper A 1.10.1 A B 0.370.05 0.670.1 W 0.70.05 1.20.05 1.10.1 1.90.1 8.00.2 3.50.05 1.750.1 P1 P2 2.00.1 2.00.05 2.00.1 2.00.1 2.00.1 2.00.1 P1 P2 P0 4.00.1 D0 +0.1 1.5 -0 T 0.370.1 0.450.1 0.640.1 4 mm pitch Emboss : A B 2.80.2 5.30.2 3.60.2 6.90.2 W 12.00.2 F 5.50.05 E 1.750.1 4.00.1 2.00.05 P0 4.00.05 D0 +0.1 1.5 -0 T 0.850.15 TA-I TECHNOLOGY CO., LTD TA-I 8.14. Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 9/13 Bulk Case Specifications: UNIT: mm Paper Tape Package Type RM RM RM RM RM RM RM RM 8.2 Size 02 04 06 10 12 13 20 25 4 mm pitch 180mm/R 250mm/R 5000 5000 5000 5000 10000 10000 10000 2 mm pitch 180mm/R 250mm/R 10000 10000 10000 20000 20000 Emboss Plastic Tape 4 mm pitch Bulk 50000 20000 10000 5000 4000 4000 Reel Specifications: UNIT: mm Type RM02 /04 / 06 RM10 /12 /13 RM20 / 25 A 178.0 1.0 B 60.0 1.0 C 13.0 1.0 W T 9.0 1.0 11.5 1.0 13.0 1.0 15.5 1.0 TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 10/13 8.3. Peel -off force : Peel -off force of paper and blister tape is in accordance with "JIS-C5202 " that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 1015 standard: 0.1 ~ 0.7 N carrier tape 9. Label : 9.1 Manufacture Label : Date Code Resistance QTY: 5000 PCS 102 Lot No: 9.2 Tolerance Type 0086166K- 0008 J 0603 Customer Label: Lead-Free Products TA-I TECH Product Spec. Customer No: LEAD FREE 0603 5%(T) 1K 105A702723 RM06JTN102 04.05.21 Date Year Month TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 11/13 10. Recommended land patterns : Land pattern Type RM RM RM RM RM RM RM RM a Size 02 (0201 ) 04 (0402 ) 06 (0603 ) 10 (0805 ) 12 (1206 ) 13 (1210 ) 20 (2010 ) 25 (2512 ) 0.25~0.3 0.50~0.6 0.7~0.9 1.0~1.4 2.0~2.4 2.0~2.4 3.3~3.7 3.6~4.0 Dimension b 0.7~0.9 1.4~1.6 2.0~2.2 3.2~3.8 4.4~5.0 4.4~5.0 5.7~6.5 7.6~8.6 ( mm ) c 0.3~0.4 0.4~0.6 0.8~1.0 0.9~1.4 1.2~1.8 2.3~3.5 2.3~3.5 2.3~3.5 11. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 +5 -0 , 5 sec Pre - heat Zone : 150 to 180 , 9030 sec Soldering Zone : 230 or higher , 3010 sec TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 12/13 12. Storage Conditions: Temperature: 5~35,Humidity:40%~75% 13. Shelf Life: 2 years from manufacturing date. 14. ECN : Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 15. Manufacturing Country & City : TA-I TECHNOLOGY CO., LTD. ( Taiwan- Tao Yuan ) Tel: 886-3-3246169 Fax : 886-3-3246167 Associated companies : (1) FORTUNE TASK RESISTOR FACTORY Tel : 86-769-8339-47903 ( China - Dongguan ) Fax : 86-769-8339-4794 (2) TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China -Dongguan ) Tel : 86-769-8339-47903 Fax : 86-769-8339-4794 (3) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Su Zhou) Tel :86- 512-63457879 Fax : 86-512-63457869 (4) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Pulaupinang ) Tel :604- 3900480 Fax : 604-3901481 (5) P.T.TAI ELECTRONICS Indonesia ( Indonesia - Jakarta ) Tel :002-62-21-44820254 Fax : 002-62-21-44820256 TA-I TECHNOLOGY CO., LTD TA-I Thick Film Chip Resistors No TRM-XX0S001J ( Lead - Free for RM series standard ) page 13/13 Revise record Date 2005/11/25 Content Owner 4. Ratings & Characteristics : Adding Rating Voltage Hank Liu 6.Reliability Tests 2005/12/12 Short Time Overload : add 0402 & 0201 Intermittent Overload : add 0402 & 0201 Load Life : add 0402 & 0201 Load Life with Humidity : add 0402 & 0201 Rapid Change of Temperature: add 0402 & 0201 Hank Liu Robustness of Termination : add 0402 & 0201 Dielectric Withstanding Voltage (Voltage Proof) : add 0402 & 0201 Insulation Resistance : add 0402 & 0201 Resistance to Dry Heat : add 0402 & 0201 Resistance to Solder Heat : add 0402 & 0201 2006/03/15 1.Adding resistance range for 1% 06032512 size Vincent from 1M to 10 M . 2006/05/11 2. Adding resistance range for 1%,2% 0402 size from 1M to 10 M . 2006/05/22 1.Adding metric system for product size. 2.Construction: Conductor: New add : Lead-free material (Original :With lead material) Vincent Vincent 2. Adding resistance range : 0402 size : Adding 0.1% : from 10 to 200 K . Adding 0.5% : from 10 to 1 M . 2006/06/09 0603-2512 size : 0.1% , 0.5% : before :from 56 to 560k . after : from 10 to 1 M . Adding 5% :10M to 20M . Vincent TA-I TECHNOLOGY CO., LTD