IN-PHASE 3-WAY DIVIDERS/COMBINERS, POWER With SMA or N Connectors GENERAL INFORMATION: KDI/Triangles Three-way Stripline in-phase power di- viders, Series YT, have excellent phase and amplitude balance. The internal resistive element is a ceramic pad and can, therefore, handle relatively high values of CW and peak power. Series YT is of Stripline construction, thereby ensuring excellent electrical and environmental 0.950-18 GHz performance. GENERAL SPECIFICATIONS: Frequency Range: 0.95-18.0 GHz RF Impedance: 50 OHMS RF Power: The power handling capability for load VSWRs Temp. information: Environment: Notes: less than 1.50 is 1 watt CW and 1 kW peak for frequencies up to 2.0 GHz, and 400 mw CW and 0.4 kW peak for frequencies from 2.0 GHz to 18.0 GHz. Operating temperature from 55C to + 85C MIL-E-5400, MIL-STD-202, MIL-E-16400 MIL-STD-883 (Special request only). X SMA FEMALE TYP SERIES YT 0.093/0.236 DIA. THRU \ 4 MOUNTING HOLES si \ TT out ala] Le +45 1 OUT TYP bo 0/0.25) 0.38/0.97 il 0.38/0.97 Im TYP 0 0.20/0.51 at 8 8 FIGURE | SERIES YT 0.125/0.320 QUA. THRU 2 DR 4 MOUNTING ROLES. 1. If the frequency band of interest is narrower than that listed, it should be indicated when ordering. Performance will be optimized over the band of interest and improved delivery may be provided. A special part number ou may be assigned. [> Ty. 2. If type N connectors are required add N to the model number. i.e.; 7 YT-18, with type N connectors, is ordered as YT-18N. Jr & |B 3. Certain models are not available with type N connectors. 4. All 3 way power dividers can be reduced in size if required. _ 074/188 TYP. 013/033 o te E ELECTRICAL PERFORMANCE I FEMALE TYP ' fume, Frequency Max." Max. Min. Phase Amplitude Out- ut , Modet Range In/Out Insertion Isolation Balance Balance line line No. GHz VSWR toss dB dB + DEG. ~=+dB) SMA SON YT-18 0.95-1.25 -1.25/1.20 0.50 20 2 0.20 1 1 MECHANICAL OUTLINESFIGURE 1 D3006M 1-2 1.25 0.55 24 3 0.15 5 NOTE 3 T-22 120-140 _120/1.15 050 22 2.020 4 i SMA CONNECTOR SERIES YT YT-23-1.70-2.40 _1.30/1.25 0.50 20 2 0.20 2 2 Outi ,; A ,; 8 | ; D E F DI007M 2-42 130/125 065 4020 6 NOTES wing ineres Inches Inches Inches Inches Inches T-41 370-420 _(1.30/1.25 0.50 20 2 0.20 2 2 200 5001800 4.800 0.40060 YT-45_4.40-5.00__1.35/1.30 0.60 20 3 0.25 3 3 | 508 12.70 4572 11684 1.02 152 YT-55 _5.40-5.90 _1.95/1.30 0.60 20 3 0.25 3 3 3 200. 4.00. 1.800 2.600 0.40060 YT-56 5206.00 1.95/1.30 0.60 18 3 0.25 3 3 508 762 4572 6604 102 1.52 I-61 670-740 _1.35/1.30 0.60 18 3 0.25 3 3 3 175 ~200 1.550 1600 025 0.63 1-68 680-850 140/135 0.80 18 4 0.25 3 3 4.45 5.08 3.937 4.064 0641.59 Yr69 710-770 135/130 0.6020 3 0253S 4 48 ABO 180 4100 0.80.50 Yr?) __7.50-8.50_1.35/1.30_0.60_20 3___02 3 3 Inches/Centimeters +03 x +.010/ +.08 x +.025 YT-89 840-970 140/135 0.50 7 4 0.30 4 4 YT-91 930-970 1.35/1.30 0.50 18 3 0.30 4 4 Outlines 5/6 on request. YT-92-9.50-11.00 1.45 /1.40 0.50 17 4 0.30 4 4 MECHANICAL OUTLINESFIGURE 2 T-94 1310-1350 _1.35/1.0 0.65 20 3 0.25 4 4 TYPE N CONNECTORS SERIES YT YT-95 __11.00-14.00_1.50/1.45 0.75 16 5 0.30 4 4 7 5 7 > : YT-98 __15.00-18.00 150/145 __1.10 16 5 0.45 4__ NOTE 3 *UNITS WITH TYPE N CONNECTORS: Up to 40 GHz multiply VSWR's by 1.05 and subtract 2.008 Outline Inches Inches Inches Inches _Inches from isolation. Above 4.0 GHz multiply VSWRs by 1.10, and subtract 3.0dB from isolation. 3 00 5 00 3 750 4 000 0 50 1 7.621870 6990 10160 1.27 9 300 300 2750 2000 050 762.762 +6990 5080 1.27 3 300 175 2750 N/A 0.88 762 445 6990 2Holes 2.24 4 3.00 125. 2750 N/A 0.63 762318 6990 2Holes _1.60 Inches/Centimeters +.03x +.010/ +.08 x +.025 IK DI/triangie ELECTRONICS 31 Farinella Drive East Hanover, NJ 07936 Phone: (201) 884-1423 3-10 TWX: (710) 986-8202 + FAX: (201) 884-0445