SURFACE MOUNT DISPLAY Part Number: KCSA03-106 Super Bright Orange Features Description z 0.3 inch digit height. The Super Bright Orange device is made with AlGaInP (on z Low current operation. GaAs substrate) light emitting diode chip. z Excellent character appearance. z Mechanically rugged. z Gray face,white segment. z Package : 550pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAF8557 REV NO: V.9A DATE: APR/07/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000386 Selection Guide Part No. Dice Super Bright Orange (AlGaInP) KCSA03-106 Iv (ucd) [1] @ 10mA Lens Type White Diffused Description Min. Typ. 21000 46000 *5600 *11000 Common Anode, Rt. Hand Decimal. Units Test Conditions Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. peak Peak Wavelength Super Bright Orange 610 nm IF=20mA D [1] Dominant Wavelength Super Bright Orange 601 nm IF=20mA 1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF8557 REV NO: V.9A DATE: APR/07/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000386 Super Bright Orange KCSA03-106 SPEC NO: DSAF8557 REV NO: V.9A DATE: APR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000386 KCSA03-106 Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF8557 REV NO: V.9A DATE: APR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000386 PACKING & LABEL SPECIFICATIONS KCSA03-106 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAF8557 REV NO: V.9A DATE: APR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000386