Surface Mount Frequency Synthesizer MLS9036-00065 MLS9036-00065 Surface Mount Frequency Synthesizer IF 64.5 - 65.5 MHz Features Integrated VCO/PLL Miniature SMT Package Low Phase Noise +5V Operation 12 11 10 9 8 DETAIL A 7 M/ A- COM LTD 12.0 PART NO. 14.6 * * * * 12 Lead Package DATE CODE Description M/A-COM synthesizers are manufactured in an ISO 9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and quality over volume production quantities. 1 2 3 4 5 6 0.2 IDENT 0.6 6.0 MAX The MLS9036-00065 synthesizer design integrates a high performance buffered VCO, PLL circuit and discrete loop filter in a surface mount package. The SMT packaging provides electrical shielding, easy PCB assembly and repeatable performance. The synthesizer is designed for use in CDMA base stations and is optimised for 70 MHz IF at the cellular RX frequency with 15 kHz step size and low phase noise. 0.8 1.0 2.0 TYP.in 5 POSITIONS DETAIL A 13.2 Electrical Specifications , TA = +25C, VCC = +5V, F = 15 kHz, FR = 15 MHz (unless otherwise stated) 1 Parameter Test Conditions 2 RF Output Power (POUT)3 Frequency Range (FOUT) Units Min. Over TOP MHz 64.5 --- 65.5 Over TOP dBm -3.0 --- +3.0 Harmonic Output Spurious Output 4 Phase Noise Integrated Phase Noise Max. dBc --- -17 -12 Phase comparison frequency (FOUT F) dBc --- -95 -80 Reference breakthrough (FOUTFR) dBc --- -100 --- SSB at 100 Hz offset from carrier dBc/Hz --- -70 --- SSB at 1 kHz offset from carrier dBc/Hz --- -96 -93 SSB at 10 kHz offset from carrier dBc/Hz --- -118 -113 SSB at 100 kHz offset from carrier dBc/Hz --- -135 --- mrad rms --- 6 ----- 300 Hz to 3 kHz bandwidth 5,6 Typ. ms --- 16 VCO Supply Current (ICC1) mA --- 15 20 PLL Supply Current (ICC2) mA --- 7 10 Frequency Switching Time Over FOUT, measured to within 500 Hz VCO Supply Voltage (VCC1) Recommended operating limit V +4.75 --- +5.25 PLL Supply Voltage (VCC2) Recommended operating limit V +4.75 --- +5.25 Step Size (F)7 Recommended operating limit kHz --- 15 --- MHz 3 --- 20 Reference Frequency (FR)8 1. 2. 3. 4. 0.5 to 2.0 Vpp sine wave into a.c. coupled CMOS. Recommended operating limit All specification limits are indicated values and apply over FOUT and for 50 load impedance. Programming control is 3 wire serial CMOS or TTL levels, in accordance with National Semiconductor LMX 1511. Output power window includes variation over operating temperature range (TOP) -40C to +85C and output frequency range (FOUT). See plot for typical phase noise at other frequency offsets. 5. See plot for typical full band switching time measured to within other offsets from final frequency. 6. Integral PLL lock monitor output, TTL high locked, TTL low unlocked. 7. Device designed for loop bandwidth of 100Hz. Device will also operate with 16 kHz stepsize and 10 MHz reference. 8. Reference frequency input impedance 10k min. V2.00 M/A-COM Division of AMP Incorporated North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Surface Mount Frequency Synthesizer MLS9036-00065 1,2 Absolute Maximum Ratings Functional Configuration Lead Function Lead Parameter Function Absolute Maximum 3 1 Ground 7 Ground VCO Supply Voltage (VCC1) 2 Clock Input 8 Reference Frequency Input PLL Supply Voltage (VCC2) +6.5V Reference Frequency Voltage -0.3V to +6.5V 3 VCC1 (VCO) 9 VCC2 (PLL) Data, Clock, Strobe Voltages -0.3V to +6.5V 4 PLL Lock Monitor Output 10 Data Input Storage Temperature (TSTOR) -45C to +125C Solder Assembly Temperature See App Note M2032 5 RF Output 11 Strobe/Enable Input 6 Ground 12 Ground 1. Exceeding these limits may cause permanent damage. 2. Static sensitive, observe appropriate handling precautions. 3. An external series resistor and bypass capacitor will allow operation at higher supply voltage and will improve power supply decoupling and noise suppression. Environmental Specifications Devices are designed to function over the operating temperature range (TOP) of -40C to +85C and after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. +6.5V 3 Ordering Information Typical Performance Synthesizers are available in either tape and reel or tube packaging. To order devices in tape and reel requires the suffix TR to be added to the part number, i.e. MLS9036-00065TR. Quantity 500 per 13 inch reel, see Application Note M2030. Phase Noise Full Band Switching Time -40 250 -60 200 -80 150 -100 100 -120 50 -140 0 -160 10 1K 100 10K 100K 100K 10M 1M 10K 1K 10 100 1 Output Power vs Supply Voltage Output Power vs Temperature 3.0 3.0 5.25 V 2.0 2.0 +85 C 1.0 1.0 5.00 V +25 C 0.0 0.0 4.75 V -40 C -1.0 -1.0 -2.0 -2.0 -3.0 -3.0 63 63 64 65 66 Phase Comparator Spurious 0 -20 -20 -40 -40 -60 -60 -80 -80 -30 -20 -10 65 66 67 Reference Breakthrough Spurious 0 -100 -40 64 67 0 10 20 30 40 -100 -20 -15 -10 -5 0 5 10 15 20 V2.00 M/A-COM Division of AMP Incorporated North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.