Cree(R) XLamp(R) XQ-E LEDs CLD-DS83 REV 11A PRODUCT FAMILY DATA SHEET XQ-E High Density LEDs XQ-E High Intensity LEDs PRODUCT DESCRIPTION FEATURES The XLamp XQ-E LEDs are available in two versions: high density * Cree's smallest lighting class LED: 1.6mm X 1.6mm (R) and high intensity. The XQ-E High Density LED enables lighting manufacturers to significantly reduce the size and total cost of their LED luminaires versus similar performance 3.5mm footprint LEDs, without sacrificing lumen output, efficacy or reliability. The XQ-E's combination of optical symmetry, consistent design across all configurations and tiny 1.6 mm X 1.6 mm footprint simplifies manufacturing and design while providing excellent color mixing. The new XQ-E High Intensity LED uses an innovative primary optic design optimized to deliver maximum candela, especially * Available in highdensity & highintensity versions for design flexibility * Available in 70, 80, & 90 CRI white, royal blue, blue, PC blue, green, PC amber, redorange, red & high efficiency (HE) photo red * Maximum drive current: 1A (high density & high intensity) * Reflow solderable - JEDEC J-STD020C compatible * Unlimited floor life at 30C/85% RH * RoHS and REACh compliant * UL(R) recognized component (E349212) WWW.CREE.COM/XLAMP through narrowbeam secondary optics. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLAMP (R) XQ-E LED TABLE OF CONTENTS Characteristics........................................................................................................................................................................................................3 Order Codes Suggested for New Designs - High Density White..........................................................................................................................4 Order Codes Suggested for New Designs - High Density Color...........................................................................................................................8 Order Codes Suggested for New Designs - High Intensity White..................................................................................................................... 11 Order Codes Suggested for New Designs - High Intensity Color...................................................................................................................... 14 Relative Spectral Power Distribution.................................................................................................................................................................. 17 Relative Flux vs. Junction Temperature.............................................................................................................................................................. 19 Electrical Characteristics..................................................................................................................................................................................... 22 Relative Flux vs. Current...................................................................................................................................................................................... 24 Typical Spatial Distribution.................................................................................................................................................................................. 27 Thermal Design.................................................................................................................................................................................................... 29 Performance Groups - Luminous Flux.............................................................................................................................................................. 32 Performance Groups - Radiant Flux.................................................................................................................................................................. 33 Performance Groups - Dominant Wavelength.................................................................................................................................................. 33 Performance Groups - Peak Wavelength.......................................................................................................................................................... 34 Performance Groups - Forward Voltage........................................................................................................................................................... 34 Performance Groups - Chromaticity.................................................................................................................................................................. 34 Cree's Standard White Chromaticity Regions Plotted on the 1931 CIE Curve................................................................................................. 38 Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions......................................................................................... 39 Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.................................................................. 40 Cree's PC Blue Kits Plotted on the 1931 CIE Curve............................................................................................................................................ 41 Cree's PC Amber Kit Plotted on the 1931 CIE Curve.......................................................................................................................................... 41 Cree's Standard Chromaticity Kits...................................................................................................................................................................... 42 Bin and Order Code Formats............................................................................................................................................................................... 43 Reflow Soldering Characteristics........................................................................................................................................................................ 44 Notes.................................................................................................................................................................................................................... 45 Mechanical Dimensions...................................................................................................................................................................................... 47 Tape and Reel....................................................................................................................................................................................................... 49 Packaging............................................................................................................................................................................................................. 51 Appendix - Order Codes Not For New Designs.................................................................................................................................................. 52 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLAMP (R) XQ-E LED CHARACTERISTICS Characteristics Unit Minimum Typical Thermal resistance, junction to solder point - High Density white C/W 6 Thermal resistance, junction to solder point - High Intensity white C/W 7 Thermal resistance, junction to solder point - royal blue C/W 4 Thermal resistance, junction to solder point - blue, PC blue C/W 6 Thermal resistance, junction to solder point - green, PC amber C/W 7 Thermal resistance, junction to solder point - redorange, red, HE photo red C/W 5 Viewing angle (FWHM) - High Density white degrees 110 Viewing angle (FWHM) - High Density royal blue, blue, green, PC amber degrees 125 Viewing angle (FWHM) - High Density redorange, red, HE photo red degrees 130 Viewing angle (FWHM) - High Intensity white degrees 120 Viewing angle (FWHM) - High Intensity royal blue, blue, PC blue, green degrees 130 Viewing angle (FWHM) - High Intensity PC amber degrees 120 Viewing angle (FWHM) - High Intensity redorange, red degrees 125 Temperature coefficient of voltage - white, royal blue, blue, PC blue mV/C -1.2 Temperature coefficient of voltage - green mV/C -1.2 Temperature coefficient of voltage - PC amber mV/C -1.2 Temperature coefficient of voltage - redorange, red mV/C -1.8 Temperature coefficient of voltage - HE photo red mV/C -2.8 ESD withstand voltage (HBM per Mil-Std-883D)- High Density V ESD classification (HBM per Mil-Std-883D) - High Intensity DC forward current Maximum 8000 Class 3A mA 1000 Reverse voltage V Forward voltage (@ 350mA, 85C) - white V 2.84 3.25 5 Forward voltage (@ 350 mA, 25C) - royal blue, V 2.9 3.5 Forward voltage (@ 350 mA, 25C) - blue V 2.95 3.5 Forward voltage (@ 350 mA, 25C) - PC blue V 3.0 3.5 Forward voltage (@ 350 mA, 25C) - green V 2.85 3.25 Forward voltage (@ 350 mA, 25C) - PC amber V 2.9 3.6 Forward voltage (@ 350 mA, 25C) - High Density redorange, red V 2.18 2.6 Forward voltage (@ 350 mA, 25C) - High Intensity redorange, red V 2.2 2.6 Forward voltage (@ 350 mA, 25C) - HE photo red V 2.17 LED junction temperature C 2.6 150 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY WHITE (TJ=85C) The following tables provide order codes for XLamp XQ-E High Density white LEDs. For a complete description of the order-code nomenclature, please consult the Bin and Order Code Formats section (page 43). Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) @ 85C Flux (lm) @ 25C* Calculated Minimum Luminous Flux (lm) @ 85C** 700mA Order Codes 1.0A No Minimum CRI 70 CRI Minimum ANSI Cool White (5000 K - 8300 K) 51 53 50 E1 E2 6200 K 6000 K 6200 K 6500K 5700K R4 130 150 224 288 XQEAWT-00-0000-00000LG51 R3 122 141 210 270 XQEAWT-00-0000-00000LF51 XQEAWT-00-0000-00000BG51 XQEAWT-00-0000-00000BF51 R2 114 132 196 252 XQEAWT-00-0000-00000LE51 XQEAWT-00-0000-00000BE51 R4 130 150 224 288 XQEAWT-00-0000-00000LG53 XQEAWT-00-0000-00000BG53 R3 122 141 210 270 XQEAWT-00-0000-00000LF53 XQEAWT-00-0000-00000BF53 R2 114 132 196 252 XQEAWT-00-0000-00000LE53 XQEAWT-00-0000-00000BE53 R4 130 150 224 288 XQEAWT-00-0000-00000LG50 XQEAWT-00-0000-00000BG50 R3 122 141 210 270 XQEAWT-00-0000-00000LF50 XQEAWT-00-0000-00000BF50 R2 114 132 196 252 XQEAWT-00-0000-00000LE50 XQEAWT-00-0000-00000BE50 R4 130 150 224 288 XQEAWT-00-0000-00000LGE1 XQEAWT-00-0000-00000BGE1 R3 122 141 210 270 XQEAWT-00-0000-00000LFE1 XQEAWT-00-0000-00000BFE1 R2 114 132 196 252 XQEAWT-00-0000-00000LEE1 XQEAWT-00-0000-00000BEE1 R4 130 150 224 288 XQEAWT-00-0000-00000LGE2 XQEAWT-00-0000-00000BGE2 R3 122 141 210 270 XQEAWT-00-0000-00000LFE2 XQEAWT-00-0000-00000BFE2 R2 114 132 196 252 XQEAWT-00-0000-00000LEE2 XQEAWT-00-0000-00000BEE2 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY WHITE (TJ=85C) - CONTINUED Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Calculated Minimum Luminous Flux (lm) @ 85C** Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* 700mA 1.0A R4 130 150 224 288 R3 122 141 210 270 XQEAWT-00-0000-00000BFE3 R2 114 132 196 252 XQEAWT-00-0000-00000BEE3 Q5 107 107 124 184 Q4 100 100 116 172 R4 130 150 224 288 XQEAWT-00-0000-00000BGF4 R3 122 141 210 270 XQEAWT-00-0000-00000BFF4 XQEAWT-00-0000-00000BEF4 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K - 5000 K) E3 F4 E4 F5 E5 5000 K 4750 K 4500 K 4250 K 4000 K XQEAWT-00-0000-00000BGE3 XQEAWT-00-0000-00000LEE3 XQEAWT-00-0000-00000LDE3 XQEAWT-00-0000-00000LCE3 R2 114 132 196 252 Q5 107 124 184 237 XQEAWT-00-0000-00000LDF4 XQEAWT-00-0000-00000LEF4 Q4 100 116 172 221 XQEAWT-00-0000-00000LCF4 Q3 93.9 109 162 208 R4 130 150 224 288 XQEAWT-00-0000-00000BGE4 R3 122 141 210 270 XQEAWT-00-0000-00000BFE4 R2 114 132 196 252 XQEAWT-00-0000-00000BEE4 Q5 107 124 184 237 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE4 Q3 93.9 109 162 208 XQEAWT-00-0000-00000LBE4 R4 130 150 224 288 R3 122 141 210 270 XQEAWT-00-0000-00000BFF5 R2 114 132 196 252 XQEAWT-00-0000-00000BEF5 Q5 107 124 184 Q4 100 116 172 R4 130 150 224 288 R3 122 141 210 270 XQEAWT-00-0000-00000BFE5 R2 114 132 196 252 XQEAWT-00-0000-00000BEE5 XQEAWT-00-0000-00000LEE5 XQEAWT-00-0000-00000HEE5 Q5 107 124 184 237 XQEAWT-00-0000-00000LDE5 XQEAWT-00-0000-00000HDE5 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE5 XQEAWT-00-0000-00000HCE5 XQEAWT-00-0000-00000LBF4 XQEAWT-00-0000-00000LEE4 XQEAWT-00-0000-00000LDE4 XQEAWT-00-0000-00000BGF5 XQEAWT-00-0000-00000LEF5 XQEAWT-00-0000-00000HEF5 237 XQEAWT-00-0000-00000LDF5 XQEAWT-00-0000-00000HDF5 221 XQEAWT-00-0000-00000LCF5 XQEAWT-00-0000-00000HCF5 XQEAWT-00-0000-00000BGE5 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY WHITE (TJ=85C) - CONTINUED Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Calculated Minimum Luminous Flux (lm) @ 85C** Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* 700mA 1.0A R2 114 132 196 252 XQEAWT-00-0000-00000LEF6 XQEAWT-00-0000-00000HEF6 Q5 107 124 184 237 XQEAWT-00-0000-00000LDF6 XQEAWT-00-0000-00000HDF6 Q4 100 116 172 221 XQEAWT-00-0000-00000LCF6 XQEAWT-00-0000-00000HCF6 R2 114 132 196 252 XQEAWT-00-0000-00000LEE6 XQEAWT-00-0000-00000HEE6 Q5 107 124 184 237 XQEAWT-00-0000-00000LDE6 XQEAWT-00-0000-00000HDE6 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE6 XQEAWT-00-0000-00000HCE6 R2 114 132 196 252 XQEAWT-00-0000-00000LEF7 XQEAWT-00-0000-00000HEF7 Q5 107 124 184 237 XQEAWT-00-0000-00000LDF7 XQEAWT-00-0000-00000HDF7 Q4 100 116 172 221 XQEAWT-00-0000-00000LCF7 XQEAWT-00-0000-00000HCF7 R2 114 132 196 252 XQEAWT-00-0000-00000LEE7 XQEAWT-00-0000-00000HEE7 Q5 107 124 184 237 XQEAWT-00-0000-00000LDE7 XQEAWT-00-0000-00000HDE7 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE7 XQEAWT-00-0000-00000HCE7 Q3 93.9 109 162 208 XQEAWT-00-0000-00000LBE7 XQEAWT-00-0000-00000HBE7 Q2 87.4 101 150 193 P4 80.6 93.3 139 178 XQEAWT-00-0000-00000U9E7 P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8E7 Q5 107 124 184 237 Q4 100 116 172 Q3 93.9 109 162 Q2 87.4 101 150 193 P4 80.6 93.3 139 178 P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8F8 P2 67.2 77.8 116 149 XQEAWT-00-0000-00000U7F8 80 CRI Typical 80 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 E6 F7 E7 F8 3750 K 3500 K 3250 K 3000 K 2850 K XQEAWT-00-0000-00000UAE7 XQEAWT-00-0000-00000LDF8 XQEAWT-00-0000-00000HDF8 221 XQEAWT-00-0000-00000LCF8 XQEAWT-00-0000-00000HCF8 208 XQEAWT-00-0000-00000LBF8 XQEAWT-00-0000-00000HBF8 XQEAWT-00-0000-00000U9F8 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY WHITE (TJ=85C) - CONTINUED Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Calculated Minimum Luminous Flux (lm) @ 85C** Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* 700mA 1.0A Q5 107 124 184 237 Q4 100 116 172 Q3 93.9 109 162 Q2 87.4 101 150 193 P4 80.6 93.3 139 178 P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8E8 P2 67.2 77.8 116 149 XQEAWT-00-0000-00000U7E8 80 CRI Typical 80 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) E8 2700 K XQEAWT-00-0000-00000LDE8 XQEAWT-00-0000-00000HDE8 221 XQEAWT-00-0000-00000LCE8 XQEAWT-00-0000-00000HCE8 208 XQEAWT-00-0000-00000LBE8 XQEAWT-00-0000-00000HBE8 XQEAWT-00-0000-00000U9E8 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY COLOR (TJ=25C) The following tables provide order codes for XLamp XQ-E High Density color LEDs. For a complete description of the order-code nomenclature, please consult the Bin and Order Code Formats section (page 43). Royal Blue Kit 01 02 03 Color Blue Dominant Wavelength (nm) 450 - 465 450 - 460 455 - 465 Minimum Radiant Flux (mW) @ 350mA Code Flux (mW) Calculated Minimum PPF (mol/s)* 37 625 2.37 XQEROY-00-0000-000000R01 36 600 2.27 XQEROY-00-0000-000000Q01 35 575 2.18 XQEROY-00-0000-000000P01 34 550 2.08 XQEROY-00-0000-000000N01 33 525 1.99 XQEROY-00-0000-000000M01 37 625 2.37 XQEROY-00-0000-000000R02 36 600 2.27 XQEROY-00-0000-000000Q02 35 575 2.18 XQEROY-00-0000-000000P02 34 550 2.08 XQEROY-00-0000-000000N02 33 525 1.99 XQEROY-00-0000-000000M02 35 575 2.18 XQEROY-00-0000-000000P03 34 550 2.08 XQEROY-00-0000-000000N03 33 525 1.99 XQEROY-00-0000-000000M03 Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA Group Flux (lm) M3 45.7 M2 K3 39.8 35.2 Order Codes Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) B3 465 B6 485 XQEBLU-00-0000-000000301 B3 465 B5 480 XQEBLU-00-0000-000000302 B4 470 B5 480 XQEBLU-00-0000-000000305 B3 465 B6 485 XQEBLU-00-0000-000000201 B3 465 B5 480 XQEBLU-00-0000-000000202 B4 470 B5 480 XQEBLU-00-0000-000000205 B3 465 B6 485 XQEBLU-00-0000-000000Z01 B3 465 B5 480 XQEBLU-00-0000-000000Z02 B4 470 B5 480 XQEBLU-00-0000-000000Z05 Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY COLOR (TJ=25C) - CONTINUED Group Flux (lm) Calculated Minimum PPF (mol/s)* S3 156 1.53 Minimum Luminous Flux (lm) @ 350mA Color S2 148 Dominant Wavelength (nm) Minimum 1.45 Green R5 139 R4 1.36 130 1.27 Color Color Red-Orange Y2 Flux (lm) Q3 93.9 Q2 87.4 P4 80.6 Group DWL (nm) G2 520 G4 535 XQEGRN-00-0000-000000K01 G2 520 G3 530 XQEGRN-00-0000-000000K02 G3 525 G4 535 XQEGRN-00-0000-000000K03 G2 520 G4 535 XQEGRN-00-0000-000000J01 G2 520 G3 530 XQEGRN-00-0000-000000J02 G3 525 G4 535 XQEGRN-00-0000-000000J03 G2 520 G4 535 XQEGRN-00-0000-000000H01 G2 520 G3 530 XQEGRN-00-0000-000000H02 G3 525 G4 535 XQEGRN-00-0000-000000H03 G2 520 G4 535 XQEGRN-00-0000-000000G01 G2 520 G3 530 XQEGRN-00-0000-000000G02 G3 525 G4 535 XQEGRN-00-0000-000000G03 Order Codes Group Flux (lm) Q2 87.4 XQEAPA-00-0000-000000A01 P4 80.6 XQEAPA-00-0000-000000901 P3 73.9 XQEAPA-00-0000-000000801 Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA Group Order Codes DWL (nm) Minimum Luminous Flux (lm) @ 350mA Color Bin PC Amber Maximum Group Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) O3 610 O4 620 O3 610 O3 615 XQERDO-00-0000-000000B02 O3 610 O4 620 XQERDO-00-0000-000000A01 O3 610 O3 615 XQERDO-00-0000-000000A02 O3 610 O4 620 XQERDO-00-0000-000000901 O3 610 O3 615 XQERDO-00-0000-000000902 O4 615 O4 620 XQERDO-00-0000-000000903 XQERDO-00-0000-000000B01 Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH DENSITY COLOR (TJ=25C) - CONTINUED Color Red Group Flux (lm) Calculated Minimum PPF (mol/s)* P3 73.9 1.92 Minimum Luminous Flux (lm) @ 350mA P2 N4 Color HE Photo Red 67.2 62 1.75 1.61 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) R2 620 R3 630 XQERED-00-0000-000000801 R2 620 R2 625 XQERED-00-0000-000000802 R2 620 R3 630 XQERED-00-0000-000000701 R2 620 R2 625 XQERED-00-0000-000000702 R2 620 R3 630 XQERED-00-0000-000000601 R2 620 R2 625 XQERED-00-0000-000000602 Peak Wavelength (nm) Group Flux (mW) Calculated Minimum PPF (mol/s)* Group PWL (nm) Group PWL (nm) 26 350 1.93 P2 650 P5 670 XQEEPR-00-0000-000000901 27 375 2.06 P2 650 P5 670 XQEEPR-00-0000-000000A01 28 400 2.20 P2 650 P5 670 XQEEPR-00-0000-000000B01 Minimum Radiant Flux (mW)@ 350mA Minimum Maximum Order Codes Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY WHITE (TJ=85C) The following tables provide order codes for XLamp XQ-E High Intensity white LEDs. For a complete description of the order-code nomenclature, please consult the Bin and Order Code Formats section (page 43). Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) @ 85C Flux (lm) @ 25C* Calculated Minimum Luminous Flux (lm) @ 85C** 700mA Order Codes 1.0A No Minimum CRI 70 CRI Minimum ANSI Cool White (5000 K - 8300 K) 51 6200 K 53 6000 K 50 6200 K E1 6500K E2 5700K R3 122 136 213 276 XQEAWT-H0-0000-00000LF51 XQEAWT-H0-0000-00000BF51 R2 114 127 199 258 XQEAWT-H0-0000-00000LE51 XQEAWT-H0-0000-00000BE51 R3 122 136 213 276 XQEAWT-H0-0000-00000LF53 XQEAWT-H0-0000-00000BF53 R2 114 127 199 258 XQEAWT-H0-0000-00000LE53 XQEAWT-H0-0000-00000BE53 R3 122 136 213 276 XQEAWT-H0-0000-00000LF50 XQEAWT-H0-0000-00000BF50 R2 114 127 199 258 XQEAWT-H0-0000-00000LE50 XQEAWT-H0-0000-00000BE50 R3 122 136 213 276 XQEAWT-H0-0000-00000LFE1 XQEAWT-H0-0000-00000BFE1 R2 114 127 199 258 XQEAWT-H0-0000-00000LEE1 XQEAWT-H0-0000-00000BEE1 R3 122 136 213 276 XQEAWT-H0-0000-00000LFE2 XQEAWT-H0-0000-00000BFE2 R2 114 127 199 258 XQEAWT-H0-0000-00000LEE2 XQEAWT-H0-0000-00000BEE2 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY WHITE (TJ=85C) - CONTINUED Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) @ 85C Flux (lm) @ 25C* Calculated Minimum Luminous Flux (lm) @ 85C** 700mA Order Codes 1.0A 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K - 5000 K) E3 F4 E4 F5 E5 5000 K 4750 K 4500 K 4250 K 4000 K R3 122 136 213 276 XQEAWT-H0-0000-00000BFE3 R2 114 127 199 258 XQEAWT-H0-0000-00000BEE3 Q5 107 119 187 242 R3 122 136 213 276 XQEAWT-H0-0000-00000LEE3 XQEAWT-H0-0000-00000LDE3 XQEAWT-H0-0000-00000BFF4 R2 114 127 199 258 XQEAWT-H0-0000-00000BEF4 XQEAWT-H0-0000-00000LEF4 Q5 107 119 187 242 XQEAWT-H0-0000-00000BDF4 XQEAWT-H0-0000-00000LDF4 Q4 100 111 175 226 R3 122 136 213 276 XQEAWT-H0-0000-00000BFE4 R2 114 127 199 258 XQEAWT-H0-0000-00000BEE4 XQEAWT-H0-0000-00000LEE4 Q5 107 119 187 242 XQEAWT-H0-0000-00000BDE4 XQEAWT-H0-0000-00000LDE4 Q4 100 111 175 226 R3 122 136 213 276 XQEAWT-H0-0000-00000BFF5 R2 114 127 199 258 XQEAWT-H0-0000-00000BEF5 XQEAWT-H0-0000-00000LEF5 Q5 107 119 187 242 XQEAWT-H0-0000-00000BDF5 XQEAWT-H0-0000-00000LDF5 Q4 100 111 175 226 R3 122 136 213 276 XQEAWT-H0-0000-00000LCF4 XQEAWT-H0-0000-00000LCE4 XQEAWT-H0-0000-00000LCF5 XQEAWT-H0-0000-00000BFE5 R2 114 127 199 258 XQEAWT-H0-0000-00000BEE5 XQEAWT-H0-0000-00000LEE5 XQEAWT-H0-0000-00000HEE5 Q5 107 119 187 242 XQEAWT-H0-0000-00000BDE5 XQEAWT-H0-0000-00000LDE5 XQEAWT-H0-0000-00000HDE5 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE5 XQEAWT-H0-0000-00000HCE5 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY WHITE (TJ=85C) - CONTINUED Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) @ 85C Flux (lm) @ 25C* Calculated Minimum Luminous Flux (lm) @ 85C** 700mA Order Codes 1.0A 80 CRI Typical 80 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 E6 F7 E7 F8 E8 3750 K 3500 K 3250 K 3000 K 2850 K 2700 K Q5 107 119 187 242 XQEAWT-H0-0000-00000LDF6 XQEAWT-H0-0000-00000HDF6 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCF6 XQEAWT-H0-0000-00000HCF6 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBF6 XQEAWT-H0-0000-00000HBF6 Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE6 XQEAWT-H0-0000-00000HDE6 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE6 XQEAWT-H0-0000-00000HCE6 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE6 XQEAWT-H0-0000-00000HBE6 Q5 107 119 187 242 XQEAWT-H0-0000-00000LDF7 XQEAWT-H0-0000-00000HDF7 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCF7 XQEAWT-H0-0000-00000HCF7 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBF7 XQEAWT-H0-0000-00000HBF7 Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE7 XQEAWT-H0-0000-00000HDE7 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE7 XQEAWT-H0-0000-00000HCE7 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE7 XQEAWT-H0-0000-00000HBE7 Q2 87.4 101 150 193 XQEAWT-H0-0000-00000UAE7 P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9E7 P3 73.9 82.4 129 167 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCF8 XQEAWT-H0-0000-00000HCF8 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBF8 XQEAWT-H0-0000-00000HBF8 Q2 87.4 101 150 193 XQEAWT-H0-0000-00000UAF8 P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9F8 P3 73.9 82.4 129 167 XQEAWT-H0-0000-00000U8F8 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE8 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE8 XQEAWT-H0-0000-00000HBE8 Q2 87.4 101 150 193 XQEAWT-H0-0000-00000LAE8 XQEAWT-H0-0000-00000HAE8 P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9E8 P3 73.9 82.4 129 167 XQEAWT-H0-0000-00000U8E8 XQEAWT-H0-0000-00000U8E7 XQEAWT-H0-0000-00000HCE8 Notes: * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 45). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Minimum CRI for 70-CRI White is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Minimum CRI for 80-CRI White is 80. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only Minimum CRI for 90-CRI White is 90. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY COLOR (TJ=25C) The following tables provide order codes for XLamp XQ-E High Intensity color LEDs. For a complete description of the order-code nomenclature, please consult the Bin and Order Code Formats section (page 43). Royal Blue Dominant Wavelength (nm) Kit 01 450 - 465 02 450 - 460 03 Color 455 - 465 Minimum Luminous Flux (lm) @ 350mA Group Flux (lm) M3 45.7 M2 39.8 Blue K3 K2 35.2 30.6 Minimum Radiant Flux (mW) @ 350mA Code Flux (mW) Calculated Minimum PPF (mol/s)* 36 600 2.27 35 575 2.18 XQEROY-H0-0000-000000P01 34 550 2.08 XQEROY-H0-0000-000000N01 33 525 1.99 XQEROY-H0-0000-000000M01 36 600 2.27 XQEROY-H0-0000-000000Q02 35 575 2.18 XQEROY-H0-0000-000000P02 34 550 2.08 XQEROY-H0-0000-000000N02 33 525 1.99 XQEROY-H0-0000-000000M02 35 575 2.18 XQEROY-H0-0000-000000P03 34 550 2.08 XQEROY-H0-0000-000000N03 33 525 1.99 XQEROY-H0-0000-000000M03 Order Codes XQEROY-H0-0000-000000Q01 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) B3 465 B6 485 XQEBLU-H0-0000-000000301 B3 465 B5 480 XQEBLU-H0-0000-000000302 B4 470 B5 480 XQEBLU-H0-0000-000000305 B3 465 B6 485 XQEBLU-H0-0000-000000201 B3 465 B5 480 XQEBLU-H0-0000-000000202 B4 470 B5 480 XQEBLU-H0-0000-000000205 B3 465 B6 485 XQEBLU-H0-0000-000000Z01 B3 465 B5 480 XQEBLU-H0-0000-000000Z02 B4 470 B5 480 XQEBLU-H0-0000-000000Z05 B3 465 B6 485 XQEBLU-H0-0000-000000Y01 B3 465 B5 480 XQEBLU-H0-0000-000000Y02 Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY COLOR (TJ=25C) - CONTINUED Color PC Blue Color Color Bin N4B & N5B Group Flux (lm) Calculated Minimum PPF (mol/s)* S3 156 1.53 Minimum Luminous Flux (lm) @ 350mA S2 148 1.45 Green R5 R4 139 130 Color PC Amber 1.36 1.27 Color Bin Y2 Minimum Luminous Flux (lm) @ 350mA Order Codes Group Flux (lm) N2 51.7 XQEAPB-H0-0000-000000401 M3 45.7 XQEAPB-H0-0000-000000301 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) G2 520 G4 535 XQEGRN-H0-0000-000000K01 G2 520 G3 530 XQEGRN-H0-0000-000000K02 G3 525 G4 535 XQEGRN-H0-0000-000000K03 G2 520 G4 535 XQEGRN-H0-0000-000000J01 G2 520 G3 530 XQEGRN-H0-0000-000000J02 G3 525 G4 535 XQEGRN-H0-0000-000000J03 G2 520 G4 535 XQEGRN-H0-0000-000000H01 G2 520 G3 530 XQEGRN-H0-0000-000000H02 G3 525 G4 535 XQEGRN-H0-0000-000000H03 G2 520 G4 535 XQEGRN-H0-0000-000000G01 G2 520 G3 530 XQEGRN-H0-0000-000000G02 G3 525 G4 535 XQEGRN-H0-0000-000000G03 Minimum Luminous Flux (lm) @ 350mA Order Codes Group Flux (lm) P4 80.6 XQEAPA-H0-0000-000000901 P3 73.9 XQEAPA-H0-0000-000000801 P2 67.2 XQEAPA-H0-0000-000000701 Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLAMP (R) XQ-E LED ORDER CODES SUGGESTED FOR NEW DESIGNS - HIGH INTENSITY COLOR (TJ=25C) - CONTINUED Color RedOrange Red Minimum Group Flux (lm) P3 73.9 P2 67.2 N4 Color Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA 62 Minimum Luminous Flux (lm) @ 350mA Maximum Order Codes Group DWL (nm) Group DWL (nm) O3 610 O4 620 XQERDO-H0-0000-000000801 O3 610 O3 615 XQERDO-H0-0000-000000802 O3 610 O4 620 XQERDO-H0-0000-000000701 O3 610 O3 615 XQERDO-H0-0000-000000702 O4 615 O4 620 XQERDO-H0-0000-000000703 O3 610 O4 620 XQERDO-H0-0000-000000601 O3 610 O3 615 XQERDO-H0-0000-000000602 O4 615 O4 620 XQERDO-H0-0000-000000603 Group Flux (lm) Calculated Minimum PPF (mol/s)* N2 51.7 1.35 M3 45.7 1.19 M2 39.8 1.04 Dominant Wavelength (nm) Minimum Group DWL (nm) R2 R2 R2 R2 Maximum Order Codes Group DWL (nm) 620 R3 630 XQERED-H0-0000-000000401 620 R2 625 XQERED-H0-0000-000000402 620 R3 630 XQERED-H0-0000-000000301 620 R2 625 XQERED-H0-0000-000000302 R2 620 R3 630 XQERED-H0-0000-000000201 R2 620 R2 625 XQERED-H0-0000-000000202 Note * * * For additional order codes NOT recommended for new designs please see the Appendix section starting on page 52 . Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLAMP (R) XQ-E LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION high density cool & neutral white from 161017 XQE NW_CW Spectra Data.xlsx High Density 100% Relative Radiant Power 80% 60% 5700 K, 70 CRI 4000 K, 75 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power high density High Density Color 100% Royal Blue Relative Radiant Power 80% Blue Green 60% PC Amber 40% Red-Orange Red 20% 0% HE Photo Red 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLAMP (R) XQ-E LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION - CONTINUED high intensity cool & neutral white from Copy of 161017 XQE NW_CW Spectra Data.xlsx High Intensity 100% Relative Radiant Power 80% 60% 5700 K, 70 CRI 4000 K, 75 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power high intensity High Intensity Color 100% Relative Radiant Power 80% Royal Blue Blue 60% PC Blue Green PC Amber 40% Red-Orange Red 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLAMP (R) XQ-E LED Relative Flux Output vs. Junction Temperature RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA) high density High Density 120% Relative Luminous Flux 100% 80% 60% White 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high density High Density Color 120% Relative Radiant Flux 100% 80% Royal Blue 60% HE Photo Red 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLAMP (R) XQ-E LED Relative Flux Output vs. Junction Temperature highVS. density RELATIVE FLUX JUNCTION TEMPERATURE (IF = 350mA) - CONTINUED High Density Color 120% Relative Luminous Flux 100% Blue 80% Green 60% PC Amber Red-Orange 40% Red 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high intensity High Intensity 120% Relative Luminous Flux 100% 80% 60% White 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLAMP (R) XQ-E LED Relative Flux Output vs. Junction Temperature RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA) - CONTINUED high intensity High Intensity Color 120% Relative Radiant Flux 100% 80% Royal Blue 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high intensity High Intensity Color 120% Relative Luminous Flux 100% Blue 80% PC Blue Green 60% PC Amber Red-Orange 40% Red 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLAMP (R) XQ-E LED Electrical Characteristics (Tj = 85C) high density afterCHARACTERISTICS Vf change ELECTRICAL (TJ = 85C) High Density Forward Current (mA) 1000 800 600 White 400 200 0 1.90 2.10 2.30 2.50 2.90 Electrical Characteristics (Tj 2.70 = 85C) high density 3.10 3.30 3.50 3.70 Forward Voltage (V) High Density Color Forward Current (mA) 1000 800 Royal Blue Blue 600 Green PC Amber 400 Red-Orange, Red HE Photo Red 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 Forward Voltage (V) green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLAMP (R) XQ-E LED Electrical Characteristics (Tj = 85C) high intensity after Vf change ELECTRICAL CHARACTERISTICS (TJ = 25C) - CONTINUED High Intensity 1000 Forward Current (mA) 800 600 White 400 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 (V) Electrical CharacteristicsForward (Tj =Voltage 85C) high intensity High Intensity Color Forward Current (mA) 1000 800 Royal Blue 600 Blue PC Blue Green 400 PC Amber Red-Orange, Red 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 Forward Voltage (V) green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLAMP (R) XQ-E LED Relative Intensity vs. Current (Tj = 85C) density RELATIVEhigh FLUX VS. CURRENT after Vf change (TJ = 85C) High Density 300% Relative Luminous Flux 250% 200% 150% White 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) high density High Density Color 300% Relative Radiant Flux 250% 200% Royal Blue 150% HE Photo Red 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLAMP (R) XQ-E LED Intensity(Tvs. Current (Tj = 85C) RELATIVE Relative FLUX VS. CURRENT = 25C) - CONTINUED J high density High Density Color 300% Relative Luminous Flux 250% 200% Blue Green PC Amber 150% Red-Orange Red 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Relative Intensity vs. Current (Tj = 85C) Forward Current (mA) high intensity after Vf change High Intensity green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx 300% Relative Luminous Flux 250% 200% White 150% 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLAMP (R) XQ-E LED Intensity(Tvs. Current (Tj = 85C) RELATIVERelative FLUX VS. CURRENT = 25C) - CONTINUED J high intensity High Intensity Color 300% Relative Radiant Flux 250% 200% Royal Blue 150% 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) high intensity High Intensity Color 300% Relative Luminous Flux 250% Blue 200% PC Blue Green 150% PC Amber Red-Orange 100% Red 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 XLAMP (R) XQ-E LED Typical Spatial TYPICAL SPATIAL DISTRIBUTION High Density high density Radiation Pattern-white 100% Relative Luminous Intensity 80% 60% White 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red high density High Density Color 100% Relative Luminous Intensity 80% Royal Blue, Blue 60% Green PC Amber 40% Red-Orange, Red, HE Photo Red 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 XLAMP (R) XQ-E LED Typical Spatial Radiation Pattern-white TYPICAL SPATIAL DISTRIBUTION - CONTINUED high intensity High Intensity after Vf change 100% Relative Luminous Intensity 80% 60% White 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red high intensity High Intensity Color 100% Relative Luminous Intensity 80% Royal Blue, Blue, PC Blue 60% Green PC Amber 40% Red-Orange, Red 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 XLAMP (R) XQ-E LED THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design - white Thermal Design - royal blue High Density high density high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) WhiteRoyal Blue 800 600 Rj-a = 10C/W 400 800 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 15C/W Rj-a = 20C/W 200 200 Rj-a = 20C/W Rj-a = 25C/W Rj-a = 25C/W 0 60 80 Thermal 0Design20- blue,40PC blue Ambient Temperature (C) 100 120 140 160 high density & high intensity 0 0 20 40 Thermal Design - green high density & high intensity 60 80 100 120 140 160 Ambient Temperature (C) 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) BlueGreen 800 600 400 Rj-a = 10C/W 800 600 400 Rj-a = 15C/W Rj-a = 20C/W Rj-a = 15C/W 200 200 Rj-a = 20C/W Rj-a = 25C/W Rj-a = 30C/W Rj-a = 25C/W 0 0 20 40 Thermal Design - PC amber 0 60 80 100 120 140 160 Ambient Temperature (C) high density & high intensity 0 20 40 60 80 100 120 140 160 80 100 120 140 160 Thermal Design - red-orange, red (C) Ambient Temperature high density PC AmberRed-Orange, Red 1200 1200 green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx 1000 Maximum Current (mA) Maximum Current (mA) 1000 800 600 400 Rj-a = 15C/W 800 600 400 Rj-a = 10C/W Rj-a = 20C/W 200 Rj-a = 15C/W Rj-a = 25C/W Rj-a = 20C/W 200 Rj-a = 30C/W 0 0 20 Rj-a = 25C/W 40 60 80 Ambient Temperature (C) 100 120 140 160 0 0 20 40 60 Ambient Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLAMP (R) XQ-E LED THERMAL DESIGN - CONTINUED Thermal Design - HE photo red high density HE Photo Red 1200 Maximum Current (mA) 1000 800 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30 XLAMP (R) XQ-E LED THERMAL DESIGN - CONTINUED The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design - white Thermal Design - royal blue highHigh intensityIntensity high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) WhiteRoyal Blue 800 600 Rj-a = 10C/W 400 800 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 15C/W Rj-a = 20C/W 200 200 Rj-a = 20C/W Rj-a = 25C/W 0 0 20 Rj-a = 25C/W 40 60 80 Ambient Temperature (C) Thermal Design - blue, PC blue 100 120 140 160 0 0 20 40 60 80 40 60 80 100 120 140 160 80 100 120 140 160 Thermal Design - green Ambient Temperature (C) 100 120 140 160 high density & high intensity high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) Blue, PC BlueGreen 800 600 400 Rj-a = 10C/W 800 600 400 Rj-a = 15C/W Rj-a = 20C/W Rj-a = 15C/W 200 200 Rj-a = 20C/W Rj-a = 25C/W Rj-a = 30C/W Rj-a = 25C/W 0 0 20 40 Thermal Design - PC amber 0 60 80 100 120 140 160 Ambient Temperature (C) high density & high intensity 0 20 Ambient Temperature Thermal Design - red-orange, red (C) high intensity PC Amber Red-Orange, Red 1200 1200 green from XQE_XQE-HI_Color_Datashet_Update_201211.xlsx 1000 Maximum Current (mA) Maximum Current (mA) 1000 800 600 400 Rj-a = 15C/W 800 600 400 Rj-a = 10C/W Rj-a = 20C/W 200 Rj-a = 15C/W Rj-a = 25C/W Rj-a = 20C/W 200 Rj-a = 25C/W Rj-a = 30C/W 0 0 20 40 60 80 Ambient Temperature (C) 100 120 140 160 0 0 20 40 60 Ambient Temperature (C) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 31 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - LUMINOUS FLUX XLamp XQ-E white LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These group codes, with a 0 appended, are used in the Bin Code "Luminous flux group." Group Code Minimum Luminous Flux (lm) Maximum Luminous Flux (lm) F2 10.7 12.3 F3 12.3 13.9 G2 13.9 15.8 G3 15.8 18.1 H0 18.1 23.5 H2 18.1 20.6 H3 20.6 23.5 J2 23.5 26.8 J3 26.8 30.6 K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62 N4 62 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 100 Q3 93.9 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 S2 148 156 S3 156 164 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 32 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - RADIANT FLUX (TJ=25C) XLamp XQ-E royal blue and HE photo red LEDs are tested for radiant flux and placed into one the following bins. Group Minimum Radiant Flux (mW) @ 350mA Maximum Radiant Flux (mW) @ 350mA 26 350 375 27 375 400 28 400 425 29 425 450 475 30 450 31 475 500 32 500 525 33 525 550 34 550 575 600 35 575 36 600 625 37 625 650 38 650 675 PERFORMANCE GROUPS - DOMINANT WAVELENGTH XLamp XQ family color LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Royal Blue Blue Green Red-Orange Red DWL Group Minimum DWL (nm) @ 350 mA Maximum DWL (nm) @ 350 mA D36 450 452.5 D37 452.5 455 D46 455 457.5 D47 457.5 460 D56 460 462.5 D57 462.5 465 B3 465 470 B4 470 475 B5 475 480 B6 480 485 G2 520 525 G3 525 530 G4 530 535 O3 610 615 O4 615 620 R2 620 625 R3 625 630 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 33 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - PEAK WAVELENGTH XLamp XQ-E HE photo red LEDs are tested for peak wavelength (PWL) and sorted into one of the PWL bins defined below. Color PWL Group Minimum PWL (nm) @ 350mA Maximum PWL (nm) @ 350mA P2 650 655 P3 655 660 P4 660 665 P5 665 670 HE Photo Red PERFORMANCE GROUPS - FORWARD VOLTAGE XLamp XQ-E redorange, red and HE photo red LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward Voltage Group Minimum Forward Voltage @ 350mA Maximum Forward Voltage @ 350mA B 1.75 2.0 C 2.0 2.25 D 2.25 2.5 E 2.5 2.75 F 2.75 3.0 G 3.0 3.25 H 3.25 3.5 J 3.5 3.75 PERFORMANCE GROUPS - CHROMATICITY XLamp XQ Family white LEDs are tested for luminous flux and placed into one of the following chromaticity groups. These group codes are used in the Bin Code "Chromaticity bin." Two-digit group codes are appended with a 0. Region 0A 0R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2980 0.2950 0.3009 0.3042 0.3037 0.2937 Region x y 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.2984 0.3133 0.2880 0.2895 0.2970 0.2870 0.2937 0.3312 0.2962 0.3220 0B 0S Region x y 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3048 0.3207 0.3135 0.2962 0.3210 0.2937 0.3005 0.3415 0.3028 0.3304 0C 0T Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3009 0.3042 0.3220 0.3037 0.2937 0.3312 0.3009 0.3042 0.3068 0.3113 0.3093 0.2993 0D 0U Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 34 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) Region 1A 1R 2A 2R 3A 3R 4A 5A1 5B1 5C1 x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3215 0.3290 0.3290 0.3300 0.3222 0.3243 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3231 0.3371 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 0.3366 0.3440 0.3429 0.3307 0.3361 0.3530 0.3615 0.3659 0.3590 0.3521 0.3512 Region x y 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3113 0.3048 0.3113 0.3005 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0.3350 0.3207 0.3417 0.3290 0.3290 0.3417 0.3215 0.3350 0.3196 0.3602 0.3290 0.3690 0.3290 0.3538 0.3120 0.3207 0.3490 0.3376 0.3463 0.3687 0.3451 0.3554 0.3371 0.3490 0.3369 0.3381 0.3428 0.3480 0.3463 0.3687 0.3245 0.3376 0.3597 0.3548 0.3641 0.3804 0.3615 0.3659 0.3465 0.3530 0.3597 0.3670 0.3578 0.3686 0.3686 0.3649 0.3702 0.3744 0.3685 0.3763 0.3760 0.3726 0.3612 0.3744 0.3685 0.3702 0.3722 0.3719 0.3797 0.3719 0.3797 0.3736 0.3874 0.3782 0.3837 0.3802 0.3916 0.3763 0.3760 0.3782 0.3825 0.3798 0.3847 0.3847 0.3877 0.3869 0.3958 0.3912 0.3917 0.3937 0.4001 0.3887 0.3836 0.3912 0.3917 1B 1S 2B 2S 3B 3S 4B 5A2 5B2 5C2 Region x y 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3207 0.3130 0.3415 0.3099 0.3196 0.3602 0.3205 0.3481 0.3115 0.3391 0.3462 0.3290 0.3538 0.3376 0.3371 0.3490 0.3290 0.3417 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3462 0.3290 0.3616 0.3463 0.3551 0.3760 0.3533 0.3620 0.3451 0.3554 0.3762 0.3480 0.3840 0.3571 0.3551 0.3760 0.3616 0.3463 0.3736 0.3641 0.3736 0.3874 0.3702 0.3722 0.3615 0.3659 0.3649 0.3744 0.3722 0.3763 0.3825 0.3798 0.3804 0.3721 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3837 0.3847 0.3877 0.3912 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 1C 1T 2C 2T 3C 3T 4C 5A3 5B3 5C3 Region x y 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 0.3538 0.3290 0.3417 0.3616 0.3371 0.3490 0.3366 0.3369 0.3290 0.3300 0.3290 0.3300 0.3366 0.3369 0.3361 0.3245 0.3538 0.3290 0.3180 0.3687 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3440 0.3427 0.3840 0.3440 0.3428 0.3907 0.3515 0.3487 0.3495 0.3339 0.3687 0.3429 0.3307 0.3804 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3590 0.3521 0.3685 0.3726 0.3612 0.3760 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3877 0.3825 0.3798 0.3917 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 1D 1U 2D 2U 3D 3U 4D 5A4 5B4 5C4 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 35 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) Region 5D1 6A1 6B1 6C1 6D1 7A1 7B1 7C1 7D1 8A1 x y 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3889 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3941 0.3968 0.4040 0.3966 0.4010 0.3882 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.4017 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4147 0.4183 0.4242 0.3919 0.4203 0.4221 0.4259 0.4073 0.4322 0.4096 0.4281 Region x y 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3681 0.3863 0.3690 0.3915 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3848 0.3968 0.3930 0.3996 0.4071 0.4052 0.4040 0.3966 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.3950 0.4186 0.3751 0.4048 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.3814 0.4183 0.3898 0.4221 0.4281 0.4006 0.3833 0.4242 0.3984 0.4259 0.4299 0.4165 0.4364 0.4188 0.4006 0.4322 0.4096 0.4342 0.4028 0.4385 0.4385 0.4119 0.4430 0.4449 0.4141 0.4496 0.4236 0.4403 0.4049 0.4449 0.4141 0.4259 0.3853 0.4300 0.4300 0.3939 0.4342 0.4359 0.3960 0.4403 0.4049 0.4316 0.3873 0.4359 0.4373 0.3893 0.4418 0.4418 0.3981 0.4465 0.4071 0.4475 0.3994 0.4523 0.4085 0.4428 0.3906 0.4475 0.3994 5D2 6A2 6B2 6C2 6D2 7A2 7B2 7C2 7D2 8A2 Region x y 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3758 0.3924 0.3768 0.3981 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3930 0.4040 0.4015 0.4071 0.4146 0.4089 0.4113 0.4001 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4037 0.4259 0.3832 0.4116 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.3898 0.4242 0.3984 0.4281 0.4342 0.4028 0.3919 0.4300 0.4073 0.4322 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4119 0.4449 0.4212 0.4496 0.4562 0.4260 0.4513 0.4164 0.3939 0.4359 0.4028 0.4403 0.4465 0.4071 0.3960 0.4418 0.3981 0.4475 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 5D3 6A3 6B3 6C3 6D3 7A3 7B3 7C3 7D3 8A3 Region x y 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3794 0.3898 0.3716 0.3800 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3966 0.4010 0.3882 0.4052 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4073 0.4221 0.3984 0.3865 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.3919 0.4203 0.3833 0.4006 0.4242 0.3919 0.4300 0.3939 0.3939 0.4259 0.3853 0.4096 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 0.4141 0.4403 0.4049 0.4236 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4049 0.4359 0.3960 0.4418 0.3981 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 5D4 6A4 6B4 6C4 6D4 7A4 7B4 7C4 7D4 8A4 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 36 XLAMP (R) XQ-E LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) Region 8B1 8C1 8D1 x y 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4582 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4483 0.4532 0.4589 0.4021 0.4538 0.3931 Region x y 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4085 0.4573 0.4099 0.4634 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.3919 0.4532 0.4008 0.4582 0.4641 0.4112 0.4589 0.4021 8B2 8C2 8D2 Region x y 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4178 0.4634 0.4193 0.4695 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4008 0.4589 0.4099 0.4641 0.4700 0.4126 0.4646 0.4034 8B3 8C3 8D3 Region x y 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4193 0.4582 0.4099 0.4207 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4021 0.4538 0.3931 0.4112 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 8B4 8C4 8D4 XLamp XQ-E High Intensity PC blue LEDs are placed into the regions defined by the following bounding coordinates. Region N4B x y 0.1379 0.0915 0.1562 0.1142 0.1598 0.0922 0.1447 0.0712 Region N5B x y 0.1312 0.1106 0.1527 0.1343 0.1562 0.1142 0.1379 0.0915 XLamp XQ-E PC amber LEDs are placed into the region defined by the following bounding coordinates. Region Y2 x y 0.5469 0.4249 0.5700 0.4100 0.5900 0.4100 0.5610 0.4390 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 37 XLAMP (R) XQ-E LED CREE'S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 2C 1T 0.35 CCy 3B 2S 8000 K 0T 0.33 0C 0B 0.31 2D 1C 3R 2A 1B 0S 0.32 3A 2B 1S 0.34 1D 0D 2U 2R 1A ANSI C78.377A 1U 1R 0A 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 0.41 6C2 6B3 0.40 6B2 5C3 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 4D 3B 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 5D2 5A3 5A2 4B 5D3 6A2 7A2 6D3 6D2 6A3 5C1 5B2 6C1 6B1 7C1 7B4 7B1 6C4 6B4 5C2 5000 K 7B3 7B2 6C3 4500 K 7C3 7C2 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 38 XLAMP (R) XQ-E LED CREE'S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 0T 0C 0B 0A 0S CCy 0.32 0C 0B 0.31 1R 1R 0U 0.36 0.35 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 0.29 1U 0R 0.29 0.28 ANSI C78.377A 2R 1A 0.30 0R CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 50 6500 K 0.36 1U 0C 0B 0.31 1R 1R 0.36 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.28 0.32 0.28 0.31 0.29 0.30 ANSI C78.377A 2R 1U 0R 0R 0.29 2U 0U 0.30 0.29 0.28 1D 1A 0D 0A 0U 3R 2A 1B 0.35 0A 0.30 0S 0.32 2D 1C 0.34 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2B 1S 0.33 0C 0B 3R 1D 2C 8000 K 0.34 3B 2S 1T 0.32 0S 0.32 3A 2D 2A 1B E1 0.35 2B 1C 2T 0.31 0T 0.33 0.36 3B CCy 8000 K 1S 3S 6500 K 2C 1T 0.34 5700 K 0.37 2T 2S 0.35 5000 K 0.39 5700 K 0.37 CCy 2U 1D 0D 0A 0U 3R 2A 1B 0.34 0.30 1U 2D 1C 0.33 0.31 ANSI C78.377A 2R 1A 0D 0T 3A 2B 1S 0.33 2U 1D 0.34 0.32 0S 0.32 3R 2A 1B 8000 K 2D 3B 2C 1T 3A 2B 1C 3S 2T 2S 0.35 0.31 0.33 0.36 3B 1T 1S 53 6500 K 2C 8000 K 0.34 5700 K 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 0.31 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 39 XLAMP (R) XQ-E LED CREE'S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 0.36 5B4 4B 3C 4D 3B 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6D2 6A3 5D3 6A2 6A4 6D3 6D1 7A4 7A1 6D4 7D1 8A1 7D4 8A3 8A2 7D3 7D2 7A3 7A2 8B1 7C4 7C1 7B4 7B1 6C4 6C1 6B4 5C4 6B1 5C1 5B2 4C 6B2 5C3 5C2 5B3 E4 6C2 6B3 7C2 7B3 7B2 6C3 7C3 8B2 E8 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 F5 5000 K 0.39 F4 0.38 0.37 4B 3C 0.36 4D 3B 5C3 5C2 5B3 5C4 5C1 5B2 4C F6 6C2 6B3 6B4 6A3 5B4 5D3 6A2 5D2 6A4 5A3 5D4 6A1 5A2 5D1 5A4 5A1 5B1 7B2 6C3 6B2 6B1 F7 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 F8 7A3 7D1 7C2 7B3 7B4 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 40 XLAMP (R) XQ-E LED CREE'S PC BLUE KITS PLOTTED ON THE 1931 CIE CURVE 0.14 0.13 0.12 N5B CCy 0.11 0.10 N4B 0.09 0.08 0.07 0.16 0.17 0.18 0.19 0.58 0.59 0.60 0.61 0.15 0.14 0.13 0.12 0.11 0.06 CCx CREE'S PC AMBER KIT PLOTTED ON THE 1931 CIE CURVE 0.46 0.45 CCy 0.44 Y2 0.43 0.42 0.41 0.57 0.56 0.55 0.54 0.53 0.40 CCx Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 41 XLAMP (R) XQ-E LED CREE'S STANDARD CHROMATICITY KITS The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 42 XLAMP (R) XQ-E LED BIN AND ORDER CODE FORMATS Bin codes and order codes for XQ LEDs are configured in the following manner: Order Code Bin Code Series XQE = XQ-E Series XQE = XQ-E Configuration B: CIass 0 = High density H = High intensity D: Reel size B: CIass 0 = High density H = High intensity Color specification 0 = No minimum CRI B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum U = 90 CRI minimum Color specification 0 = No minimum CRI B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum U = 90 CRI minimum Chromaticity kit SSSCCC-BD-HHHH-NNNNVRFGG Luminous flux group SSSCCC-B-WWW-FFF-VR-AAAA Internal code Flux Voltage performance group Voltage specification Chromaticity bin Internal code Color AWT = White ROY = Royal Blue BLU = Blue APB = PC Blue GRN = Green APA = PC Amber RDO = Red-Orange RED = Red EPR = High Efficiency Photo Red Color AWT = White ROY = Royal Blue BLU = Blue APB = PC Blue GRN = Green APA = PC Amber RDO = Red-Orange RED = Red EPR = High Efficiency Photo Red Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 43 XLAMP (R) XQ-E LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 44 XLAMP (R) XQ-E LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XQ-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 45 XLAMP (R) XQ-E LED NOTES - CONTINUED UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 46 XLAMP (R) XQ-E LED MECHANICAL DIMENSIONS Thermal vias, if present, are not shown on these drawings. 6 5 5 5 4 NOTICE CE DENTIAL. THISAND PLOT AND THE INFORMATION L. THIS PLOT THE INFORMATION THE INFORMATION WITHIN ARE THE PROPRIETARY N ARE THE PROPRIETARY AND AND ETARY AND AL INFORMATION OF INC. CREE, INC.PLOT THIS PLOT ORMATION CREE, THIS E, INC. THISOF PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY D, REPRODUCED OR DISCLOSED TO ANY R DISCLOSED TO ANY High Density ZED PERSON THE WITHOUT WRITTEN CONSENT RSON THE WITHOUT WRITTEN CONSENT CONSENT 4 1.60 2 REVISONS All dimensions in mm. .38 Optical Reference R.936 R.936 .38 .60 1.60 1.50 1.50 1.60 Top View 1.60 1.60 4 4 3 1.50 .30 .30 3.30 1.60 3 2 1 REVISONS REVISONS REV DESCRIPTION DESCRIPTION BY DAT B ANODE NOTE ADDED ANODE AND8/6/ TEX ADDED AND TEXT NOTEDC 2 REV B .30 1.60 Optical Reference OPTICAL REFERENCE SOLDER PAD REFERENCE .30 3.30 1.60 3.30 OPTICAL REFERENCE 1.60 1.50 .60 PAD SOLDER SOLDER PAD REFERENCE REFERENCE .60 Anode (+) 1.50 1.50 Optical OPTICAL REFERENCE Reference .80 .10 Top View ECOMMENDED PC SOLDER BOARD SOLDER PAD NDED PAD ER PADPC BOARD 3.300 .30 Bottom View Side View 1.60 .60 Notch is onNOTCH IS O cathode (-)CATHODE(side 1.50 .30 1.50 .65 .60 .44 .44 .44 OPTICAL REFERENCE .60 .60 .60 R.936 Optical Reference OPTICAL REFERENCE REFERENCE OPTICAL REFERENCE OPTICAL 1.60 .65 2 1.60 REFERENCE REFERENCE .38 OPTICAL REFERENCE OPTICALOPTICAL 1.60 2 1 RE REV REV REV BYDE Measurement tolerances unless indicatedDESCRIPTION otherwise: .13 mmDESCRIPT A Init A Release Initial DDS Relea A Initial B UPDATED B UPDATED OVERALL DOVER CCO B UPDATED OVERALL COMPONENT HEIGHT C REF. ADDED OPTICA ADDED DC C ADDEDCOPTICAL 1 D XQE/XQA CHANGED HEIGHT CHANGED HEIGHT TODC BLEN D CHANGED HEIGHTDTO BLEND TOGETHE XQ-E High Density 1.60 3 3 3 XQEAWT-0x-xxxx-xxxxxxxxx 6 5 6 5 NOTICE NOTICE High Intensity 1.50 1.50 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION ENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT AL INFORMATION OF CREE, INC.OF THIS PLOT XQEAWT-Hx-xxxx-xxxxxxxxx MAY NOT BE COPIED, REPRODUCED ORTO DISCLOSED TO ANY COPIED, REPRODUCED OR DISCLOSED ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT ED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. XQ-E.30 High Intensity .30 60 4 .80 .10 .30 ALL DIMENSIONS NOTED .13MM UNLES DIMENSIONS ARE ARE .13MM UNLESS OTHER ALL DIMENSIONS ARE ALL .13MM UNLESS OTHERWIDE Bottom View DAT DRAWN DATE BY DRAWN BY DATEOTHERWISE DRAWN BY SPECIFIED UNLESS UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED 46 Seibel 7/19 Seibel Seibel DIMENSIONS 7/19/13 ARE IN D.7/19/13 ARE IN D. DIMENSIONS ARE IN D.DIMENSIONS Du CHECK CHECK DATE CHECK DATE MILLIMETERS AND AFTER FINISH. DAT MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. Ph . UNLESS -- ---Fa -- SPECIFIED: TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: -- TOLERANCE -.XX .25 .XX DATE .25 .XX .25 APPROVED DATE DAT APPROVED APPROVED RECOMMENDED TRACE LAYOUT RECOMMENDED RECOMMENDED TRACE LAYOUT 1.500TRACE LAYOUT 1.500 .XXXTITLE .125 .XXX7/19/13 .125 .XXX .125 Nevins TITL 7/19 J. Nevins X .5J. NevinsJ. 7/19/13 X .5 XTHIRD .5 ANGLE PROJECTION THIRD PROJECTION THIRD ANGLE PROJECTION (R) ANGLE (R) (R) XQE_XQA OUTLINE MATERIAL MATERIAL MATERIAL Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL and FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .300 .300 the UR logo are registered trademarks of UL LLC. .X SIZE 1.5 .X 1.5 .X 1.5 DRAWING NO. -- SIZE --- .75 .XX .75 .XX .XX .75 .XXXFINISH .25 .XXX .25 .XXX .25 FINAL PROTECTI FINAL PROTECTIVE FINIS FINAL PROTECTIVE 2610-00035 C 47 X C .5 X .5 X .5 SCAL SCALE SH 1.6 1.6 1.6 SURFACE FINISH: --45 SURFACE FINISH: SURFACE FINISH: -45.000 .65 .65 3.300 3.300 Side View .30 0.8 0.50 ANODE SIDE 0.3 0.50 OPTICAL REFERENCE EXAMPLE OPTICAL REF MARK XLAMP (R) XQ-E LED IDENTIFICATION MECHANICAL DIMENSIONS - CONTINUED High Density & High Intensity 1.5 0.3 0.65 0.50 0.50 0.45 1.20 3.3 1.6 1.20 1.45 3.3 Recommended Stencil Pad Recommended PC Board Solder Pad and Trace Layout Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 48 5 4 3 2 1 REVISONS E INFORMATION RY AND NC. THIS PLOT DISCLOSED TO ANY WRITTEN CONSENT REV BY DESCRIPTION DATE APP'D XLAMP (R) XQ-E LED TAPE AND REEL D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. Except as noted, all dimensions in mm [in]. Measurement tolerances unless indicated otherwise: .xx = .10 mm High Density XQEAWT-0x-xxxx-xxxxxxxxx XQ-E High Density C 1.500 +.10 -.00 4.000 CATHODE SIDE 1.750 A 1.65 8.000 NOMINAL 8.30 MAX 1.85 1.000 2.000 A 3.50 .10 .30 .10 ANODE SIDE B High Intensity XQEAWT-Hx-xxxx-xxxxxxxxx XQ-E High Intensity Ao Ao Bo Bo Ko Ko O1.50 O1.50 +.10/-.00 +.10/-.00 [+.0039/-.0000] [+.0039/-.0000]REFERENCE VENDOR PART NUMBER 021142 4.00 4.00 [.157] [.157] Po Po 2.00 2.00 [.079] [.079] P2 P2 1.75 1.75 [.069] [.069] E2 E2 CATHODE CATHODE SIDE SIDE THIRD ANGLE PROJECTION mulative tolerance 0.2mm UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 DRAWN BY D. CRONIN DATE 4600 Silicon Drive Durham, N.C 27703 5/31/12 CHECK DATE APPROVED DATE Phone (919) 313-5300 Fax (919) 313-5558 TITLE 8.00 8.00 [.315] [.315] FOR SHEET METAL PARTS ONLY .X 1.5 NOMINAL NOMINAL 3.50 F 3.50 [.138] [.138] F .XX .75 .XXX .25 8.30 [.327] [.327] X .5 6.25 6.25 8.30 1.6 MAX MAX SURFACE FINISH: [.246] [.246] W W 2 O1.00 O1.00 E2 E2 [.039] [.039] D1 D1 MATERIAL SIZE FINAL PROTECTIVE FINISH 5 4 3 4.00 4.00 [.157] [.157] PP SCALE 1.85 1.85 [.073] [.073] Bo BoXPQ Carrier Tape, 1.7X1.7 3.0 3.0 C REV. DRAWING NO. 2402-00023 SHEET 4.000 A A OF 1 ANODE ANODE SIDE SIDE 1.98 1.98 [.078] [.078] 3.0 3.0 4.00 [.157] Po 2.00 [.079] P2 POCKET POCKET SIZE SIZE 1.85 1.85 mm mm [.073"] [.073"] 1.85 1.85 mm mm [.073"] [.073"] 1.20 1.20 mm mm [.047"] [.047"] .30 .30 [.012] [.012] TT 1.20 1.20 [.047] [.047] Ko Ko O1.50 +.10/-.00 [+.0039/-.0000] 1.85 1.85 [.073] [.073] Ao Ao CATHODE SIDE Ao Bo Ko POCKET SIZE 1.85 mm [.073"] 1.85 mm [.073"] 1.20 mm [.047"] 1.75 [.069] E2 1.85Inc. [.073] Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, UL(R) and Bo the UR logo are registered trademarks of UL LLC. 8.00 [.315] 3.50 [.138] F NOMINAL 8.30 [.327] 6.25 MAX [.246] 3.0 49 1 /1 XLAMP (R) XQ-E LED TAPE AND REEL - CONTINUED High Density & High Intensity User Feed Direction END START Trailer 160 mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (XQ-E High Density - 2,000 Lamps XQ-E High Intensity - 3,000 Lamps) Leader 400 mm (min) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 50 XLAMP (R) XQ-E LED PACKAGING The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded on a reel. Each box contains only one reel in a moisture barrier bag. Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 51 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS The following order codes are active and valid order codes, but higher performance options are also available. Please see page 4 page 5 for order codes of XLamp XQ-E High Density white LEDs that could serve as alternatives for the order codes set forth below. XQ-E High Density ANSI Cool White, TJ=85C Minimum Luminous Flux (lm) @ 350mA Chromaticity Kit CCT Code Order Codes Flux (lm) No Minimum CRI 70 CRI Minimum ANSI Cool White (5000 K - 8300 K) 51 6200 K Q5 107 XQEAWT-00-0000-00000LD51 XQEAWT-00-0000-00000BD51 53 6000 K Q5 107 XQEAWT-00-0000-00000LD53 XQEAWT-00-0000-00000BD53 50 6200 K Q5 107 XQEAWT-00-0000-00000LD50 XQEAWT-00-0000-00000BD50 E1 6500K Q5 107 XQEAWT-00-0000-00000LDE1 XQEAWT-00-0000-00000BDE1 E2 5700K Q5 107 XQEAWT-00-0000-00000LDE2 XQEAWT-00-0000-00000BDE2 XQ-E High Density Neutral White, TJ=85C Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K - 5000 K) E3 5000 K F4 4750 K E4 4500 K F5 E5 4250 K 4000 K Q5 107 XQEAWT-00-0000-00000BDE3 Q5 107 XQEAWT-00-0000-00000BDF4 Q4 100 XQEAWT-00-0000-00000BCF4 Q5 107 XQEAWT-00-0000-00000BDE4 Q4 100 XQEAWT-00-0000-00000BCE4 Q5 107 XQEAWT-00-0000-00000BDF5 Q4 100 Q3 93.9 Q5 107 Q4 100 Q3 93.9 XQEAWT-00-0000-00000LBF5 XQEAWT-00-0000-00000HBF5 XQEAWT-00-0000-00000LBE5 XQEAWT-00-0000-00000HBE5 XQEAWT-00-0000-00000BDE5 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 52 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED The following order codes are active and valid order codes, but higher performance options are also available. Please see page 6 page 7 for order codes of XLamp XQ-E High Density white LEDs that could serve as alternatives for the order codes set forth below. XQ-E High Density Warm White, TJ=85C Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 3750 K E6 3500 K F7 3250 K E7 F8 E8 3000 K 2850 K 2700 K Q3 93.9 XQEAWT-00-0000-00000LBF6 XQEAWT-00-0000-00000HBF6 Q2 87.4 XQEAWT-00-0000-00000LAF6 XQEAWT-00-0000-00000HAF6 Q3 93.9 XQEAWT-00-0000-00000LBE6 XQEAWT-00-0000-00000HBE6 Q2 87.4 XQEAWT-00-0000-00000LAE6 XQEAWT-00-0000-00000HAE6 Q3 93.9 XQEAWT-00-0000-00000LBF7 XQEAWT-00-0000-00000HBF7 Q2 87.4 XQEAWT-00-0000-00000LAF7 XQEAWT-00-0000-00000HAF7 P4 80.6 XQEAWT-00-0000-00000L9F7 XQEAWT-00-0000-00000H9F7 Q2 87.4 XQEAWT-00-0000-00000LAE7 XQEAWT-00-0000-00000HAE7 P4 80.6 XQEAWT-00-0000-00000L9E7 XQEAWT-00-0000-00000H9E7 P3 73.9 P2 67.2 N4 62 XQEAWT-00-0000-00000U7E7 Q2 87.4 XQEAWT-00-0000-00000LAF8 XQEAWT-00-0000-00000HAF8 P4 80.6 XQEAWT-00-0000-00000L9F8 XQEAWT-00-0000-00000H9F8 P3 73.9 P2 67.2 XQEAWT-00-0000-00000U6E7 N4 62 XQEAWT-00-0000-00000U6F8 N3 56.8 XQEAWT-00-0000-00000U5F8 Q2 87.4 XQEAWT-00-0000-00000LAE8 XQEAWT-00-0000-00000HAE8 P4 80.6 XQEAWT-00-0000-00000L9E8 XQEAWT-00-0000-00000H9E8 P3 73.9 P2 67.2 N4 62 XQEAWT-00-0000-00000U6E8 N3 56.8 XQEAWT-00-0000-00000U5E8 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 53 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED The following order codes are active and valid order codes, but higher performance options are also available. Please see page 8 page 9 for order codes of XLamp XQ-E High Density color LEDs that could serve as alternatives for the order codes set forth below. XQ-E High Density Color, TJ=25C Minimum Radiant Flux (mW) @ 350mA Royal Blue Dominant Wavelength (nm) Kit 01 32 500 1.90 XQEROY-00-0000-000000L01 31 475 1.80 XQEROY-00-0000-000000K01 30 450 1.71 XQEROY-00-0000-000000J01 32 500 1.90 XQEROY-00-0000-000000L02 31 475 1.80 XQEROY-00-0000-000000K02 30 450 1.71 XQEROY-00-0000-000000J02 32 500 1.90 XQEROY-00-0000-000000L03 31 475 1.80 XQEROY-00-0000-000000K03 30 450 1.71 XQEROY-00-0000-000000J03 450 - 460 03 455 - 465 Group Blue 30.6 Minimum Luminous Flux (lm) @ 350mA Group Q5 Q4 Q3 Minimum Flux (lm) K2 Flux (lm) 107 100 93.9 Order Codes Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA Color Green Flux (mW) 450 - 465 02 Color Code Calculated Minimum PPF (mol/s)* 0.91 0.86 Order Codes Group DWL (nm) Group DWL (nm) B3 465 B6 485 XQEBLU-00-0000-000000Y01 B3 465 B5 480 XQEBLU-00-0000-000000Y02 B4 470 B5 480 XQEBLU-00-0000-000000Y05 Calculated Minimum PPF (mol/s)* 0.98 Maximum Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) G2 520 G4 535 XQEGRN-00-0000-000000D01 G2 520 G3 530 XQEGRN-00-0000-000000D02 G3 525 G4 535 XQEGRN-00-0000-000000D03 G2 520 G4 535 XQEGRN-00-0000-000000C01 G2 520 G3 530 XQEGRN-00-0000-000000C02 G3 525 G4 535 XQEGRN-00-0000-000000C03 G2 520 G4 535 XQEGRN-00-0000-000000B01 G2 520 G3 530 XQEGRN-00-0000-000000B02 G3 525 G4 535 XQEGRN-00-0000-000000B03 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). * Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 54 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED The following order codes are active and valid order codes, but higher performance options are also available. Please see page 9 page 10 for order codes of XLamp XQ-E High Density color LEDs that could serve as alternatives for the order codes set forth below. Color PC Amber Y2 Group 73.9 Red-Orange P2 Red 67.2 P2 67.2 Order Codes XQEAPA-00-0000-000000701 Maximum Order Codes Group DWL (nm) Group DWL (nm) O3 610 O4 620 XQERDO-00-0000-000000801 O3 610 O3 615 XQERDO-00-0000-000000802 O4 615 O4 620 XQERDO-00-0000-000000803 O3 610 O4 620 XQERDO-00-0000-000000701 O3 610 O3 615 XQERDO-00-0000-000000702 O4 615 O4 620 XQERDO-00-0000-000000703 Group Flux (lm) Calculated Minimum PPF (mol/s)* N3 56.8 1.48 Minimum Luminous Flux (lm) @ 350mA Flux (lm) Minimum Flux (lm) P3 Group Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA Color Color Minimum Luminous Flux (lm) @ 350mA Color Bin Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) R2 620 R3 630 XQERED-00-0000-000000501 R2 620 R2 625 XQERED-00-0000-000000502 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). * Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 55 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED The following order codes are active and valid order codes, but higher performance options are also available. Please see page 13 for order codes of XLamp XQ-E High Intensity white LEDs that could serve as alternatives for the order codes set forth below. XQ-E High Intensity Warm White, TJ=85C Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum 90 CRI Minimum ANSI Warm White (2700 K - 3750 K) E7 3000K P2 67.2 F8 2850K P2 67.2 XQEAWT-H0-0000-00000U7E7 XQEAWT-H0-0000-00000U7F8 E8 2700 K P2 67.2 XQEAWT-H0-0000-00000U7E8 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 56 XLAMP (R) XQ-E LED APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED The following order codes are active and valid order codes, but higher performance options are also available. Please see page 14 page 15 for order codes of XLamp XQ-E High Intensity color LEDs that could serve as alternatives for the order codes set forth below. XQ-E High Intensity Color, TJ=85C Color Blue Group Flux (lm) Group K2 30.6 B4 470 Color Bin PC Blue N4B & N5B Minimum Luminous Flux (lm) @ 350mA Maximum Group DWL (nm) B5 480 Order Codes XQEBLU-H0-0000-000000Y05 Minimum Luminous Flux (lm) @ 350mA Group Flux (lm) M2 39.8 Order Codes XQEAPB-H0-0000-000000201 Dominant Wavelength (nm) Group Flux (lm) Calculated Minimum PPF (mol/s)* R2 114 1.11 G2 520 G4 535 XQEGRN-H0-0000-000000E01 G2 520 G4 535 XQEGRN-H0-0000-000000D01 Q5 107 0.98 G2 520 G3 530 XQEGRN-H0-0000-000000D02 G3 525 G4 535 XQEGRN-H0-0000-000000D03 Q4 Green Minimum DWL (nm) Color Color Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350mA Q3 Q2 P4 100 93.9 87.4 80.6 0.91 0.86 0.80 074 Minimum Maximum Group DWL (nm) Group DWL (nm) Order Codes G2 520 G4 535 XQEGRN-H0-0000-000000C01 G2 520 G3 530 XQEGRN-H0-0000-000000C02 G3 525 G4 535 XQEGRN-H0-0000-000000C03 G2 520 G4 535 XQEGRN-H0-0000-000000B01 G2 520 G3 530 XQEGRN-H0-0000-000000B02 G3 525 G4 535 XQEGRN-H0-0000-000000B03 G2 520 G4 535 XQEGRN-H0-0000-000000A01 G2 520 G3 530 XQEGRN-H0-0000-000000A02 G3 525 G4 535 XQEGRN-H0-0000-000000A03 G2 520 G4 535 XQEGRN-H0-0000-000000901 G2 520 G3 530 XQEGRN-H0-0000-000000902 G3 525 G4 535 XQEGRN-H0-0000-000000903 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 45). * Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright (c) 2013-2021 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 57