www.ti.com
FEATURES
SN54LVTH162373...WDPACKAGE
SN74LVTH162373...DGGORDL PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
1OE
1Q1
1Q2
GND
1Q3
1Q4
VCC
1Q5
1Q6
GND
1Q7
1Q8
2Q1
2Q2
GND
2Q3
2Q4
VCC
2Q5
2Q6
GND
2Q7
2Q8
2OE
1LE
1D1
1D2
GND
1D3
1D4
VCC
1D5
1D6
GND
1D7
1D8
2D1
2D2
GND
2D3
2D4
VCC
2D5
2D6
GND
2D7
2D8
2LE
DESCRIPTION/ORDERING INFORMATION
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
Members of the Texas Instruments Widebus™Family
Output Ports Have Equivalent 22- SeriesResistors, So No External Resistors AreRequired
Support Mixed-Mode Signal Operation (5-VInput and Output Voltages With 3.3-V V
CC
)Support Unregulated Battery Operation Downto 2.7 VTypical V
OLP
(Output Ground Bounce) <0.8 Vat V
CC
= 3.3 V, T
A
= 25 °CI
off
and Power-Up 3-State Support HotInsertion
Bus Hold on Data Inputs Eliminates the Needfor External Pullup/Pulldown ResistorsDistributed V
CC
and GND Pins MinimizeHigh-Speed Switching NoiseFlow-Through Architecture Optimizes PCBLayout
Latch-Up Performance Exceeds 500 mA PerJESD 17ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A)
The 'LVTH162373 devices are16-bit transparent D-type latches with 3-state outputs designed for low-voltage(3.3-V) V
CC
operation, but with the capability to provide a TTL interface to a 5-V system environment. Thesedevices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, andworking registers.
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
SN74LVTH162373DLTube of 25
74LVTH162373DLG4SSOP DL LVTH162373SN74LVTH162373DLRReel of 1000
74LVTH162373DLRG4–40 °C to 85 °C
SN74LVTH162373DGGRTSSOP DGG Reel of 2000 LVTH16237374LVTH162373DGGRE4VFBGA GQL SN74LVTH162373KRReel of 1000 LL2373VFBGA ZQL
74LVTH162373ZQLR(Pb-free)–55 °C to 125 °C CFP WD Tube SNJ54LVTH162373WD SNJ54LVTH162373WD
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 1993–2006, Texas Instruments IncorporatedProducts conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
TERMINAL ASSIGNMENTS
(1)
GQL ORZQL PACKAGE
(TOP VIEW)
J
H
G
F
E
D
C
B
A
21 3 4 65
K
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
A buffered output-enable ( OE) input can be used to place the eight outputs in either a normal logic state (high orlow logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive thebus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lineswithout interface or pullup components.
OE does not affect internal operations of the latch. Old data can be retained or new data can be entered whilethe outputs are in the high-impedance state.
The outputs, which are designed to source or sink up to 12 mA, include equivalent 22- series resistors toreduce overshoot and undershoot.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldownresistors with the bus-hold circuitry is not recommended.
When V
CC
is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down.However, to ensure the high-impedance state above 1.5 V, OE should be tied to V
CC
through a pullup resistor;the minimum value of the resistor is determined by the current-sinking capability of the driver.
These devices are fully specified for hot-insertion applications using I
off
and power-up 3-state. The I
off
circuitrydisables the outputs, preventing damaging current backflow through the devices when they are powered down.The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,which prevents driver conflict.
These devices can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, theQ outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at theD inputs.
123456
A1 OE NC NC NC NC 1LE
B1Q2 1Q1 GND GND 1D1 1D2
C1Q4 1Q3 V
CC
V
CC
1D3 1D4
D1Q6 1Q5 GND GND 1D5 1D6
E1Q8 1Q7 1D7 1D8
F2Q1 2Q2 2D2 2D1
G2Q3 2Q4 GND GND 2D4 2D3
H2Q5 2Q6 V
CC
V
CC
2D6 2D5
J2Q7 2Q8 GND GND 2D8 2D7
K2 OE NC NC NC NC 2LE
(1) NC - No internal connection
FUNCTION TABLE(each 8-bit section)
INPUTS
OUTPUT
QOE LE D
L H H HL H L LL L X Q
0
H X X Z
2
Submit Documentation Feedback
www.ti.com
1OE
1LE
1D1
ToSevenOtherChannels
1Q1
2OE
2LE
2D1
2Q1
ToSevenOtherChannels
1
48
47
24
25
36
C1
1D
132
C1
1D
PinnumbersshownarefortheDGG,DL,andWDpackages.
Absolute Maximum Ratings
(1)
Recommended Operating Conditions
(1)
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
LOGIC DIAGRAM (POSITIVE LOGIC)
over recommended operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 4.6 VV
I
Input voltage range
(2)
–0.5 7 VV
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 7 VV
O
Voltage range applied to any output in the high state
(2)
–0.5 V
CC
+ 0.5 VI
O
Current into any output in the low state 30 mAI
O
Current into any output in the high state
(3)
30 mAI
IK
Input clamp current V
I
< 0 –50 mAI
OK
Output clamp current V
O
< 0 –50 mADGG package 70θ
JA
Package thermal impedance
(4)
DL package 63 °C/WGQL/ZQL package 42T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operatingconditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.(3) This current flows only when the output is in the high state and V
O
> V
CC
.(4) The package thermal impedance is calculated in accordance with JESD 51-7.
SN54LVTH162373 SN74LVTH162373
UNITMIN MAX MIN MAX
V
CC
Supply voltage range 2.7 3.6 2.7 3.6 VV
IH
High-level input voltage 2 2 VV
IL
Low-level input voltage 0.8 0.8 VV
I
Input voltage 5.5 5.5 VI
OH
High-level output current –12 –12 mAI
OL
Low-level output current 12 12 mAt/ v Input transition rise or fall rate Outputs enabled 10 10 ns/Vt/ V
CC
Power-up ramp rate 200 200 µs/VT
A
Operating free-air temperature –55 125 –40 85 °C
(1) All unused control inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3Submit Documentation Feedback
www.ti.com
Electrical Characteristics
Timing Requirements
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
over operating free-air temperature range (unless otherwise noted)
SN54LVTH162373 SN74LVTH162373PARAMETER TEST CONDITIONS UNITMIN TYP
(1)
MAX MIN TYP
(1)
MAX
V
IK
V
CC
= 2.7 V, I
I
= –18 mA –1.2 –1.2 VV
OH
V
CC
= 3 V, I
OH
= –12 mA 2 2 VV
OL
V
CC
= 3 V, I
OL
= 12 mA 0.8 0.8 VV
CC
= 0 or 3.6 V, V
I
= 5.5 V 10 10Control inputs V
CC
= 3.6 V, V
I
= V
CC
or GND ±1±1I
I
µAV
I
= V
CC
1 1Data inputs V
CC
= 3.6 V
V
I
= 0 –5 –5I
off
V
CC
= 0, V
I
or V
O
= 0 to 4.5 V ±100 µAV
I
= 0.8 V 75 75V
CC
= 3 V
V
I
= 2 V –75 –75I
I(hold)
Data inputs µA500V
CC
= 3.6 V
(2)
, V
I
= 0 to 3.6 V
–750I
OZH
V
CC
= 3.6 V, V
O
= 3 V 5 5 µAI
OZL
V
CC
= 3.6 V, V
O
= 0.5 V –5 –5 µAV
CC
= 0 to 1.5 V, V
O
= 0.5 V to 3 V,I
OZPU
±100
(3)
±100 µAOE = don't careV
CC
= 1.5 V to 0, V
O
= 0.5 V to 3 V,I
OZPD
±100
(3)
±100 µAOE = don't care
Outputs high 0.19 0.19V
CC
= 3.6 V,I
CC
I
O
= 0, Outputs low 5 5 mAV
I
= V
CC
or GND
Outputs disabled 0.19 0.19V
CC
= 3 V to 3.6 V, One input at V
CC
0.6 V,I
CC
(4)
0.2 0.2 mAOther inputs at V
CC
or GNDC
i
V
I
= 3 V or 0 3 3 pFC
o
V
O
= 3 V or 0 9 9 pF
(1) All typical values are at V
CC
= 3.3 V, T
A
= 25 °C.(2) This is the bus-hold maximum dynamic current. It is the minimum overdrive current required to switch the input from one state toanother.
(3) On products compliant to MIL-PRF-38535, this parameter is not production tested.(4) This is the increase in supply current for each input that is at the specified TTL voltage level, rather than V
CC
or GND.
over operating free-air temperature range (unless otherwise noted) (see Figure 1 )
SN54LVTH162373 SN74LVTH162373
V
CC
= 3.3 V V
CC
= 3.3 VV
CC
= 2.7 V V
CC
= 2.7 V UNIT±0.3 V ±0.3 V
MIN MAX MIN MAX MIN MAX MIN MAX
t
w
Pulse duration, LE high 3 3 3 3 nst
su
Setup time, data before LE 1.3 0.6 1 0.6 nst
h
Hold time, data after LE 1 1.1 1 1.1 ns
4
Submit Documentation Feedback
www.ti.com
Switching Characteristics
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
over recommended operating free-air temperature range, C
L
= 50 pF (unless otherwise noted) (see Figure 1 )
SN54LVTH162373 SN74LVTH162373
FROM TO V
CC
= 3.3 V V
CC
= 3.3 VPARAMETER V
CC
= 2.7 V V
CC
= 2.7 V UNIT(INPUT) (OUTPUT) ±0.3 V ±0.3 V
MIN MAX MIN MAX MIN TYP
(1)
MAX MIN MAX
t
PLH
1.8 5 5.7 1.9 3.1 4.6 5.1D Q nst
PHL
1.8 4.4 4.8 1.9 2.8 4 4.3t
PLH
2.1 5.4 6.2 2.2 3.4 5.1 5.8LE Q nst
PHL
2.1 4.9 4.7 2.2 3.2 4.6 4.3t
PZH
1.7 5.6 7 1.8 3.2 5.4 6.6OE Q nst
PZL
1.7 5.3 5.9 1.8 3.2 4.9 5.5t
PHZ
2.3 6.3 6.6 2.4 3.8 5.4 5.7OE Q nst
PLZ
1 7.4 6.4 2.2 3.5 5.1 5t
sk(LH)
0.5
nst
sk(HL)
0.5
(1) All typical values are at V
CC
= 3.3 V, T
A
= 25 °C.
5Submit Documentation Feedback
www.ti.com
PARAMETER MEASUREMENT INFORMATION
th
tsu
FromOutput
UnderTest
C =50pF
L
(seeNote A)
LOADCIRCUIT
S1
6V
GND
500 W
500 W
DataInput
TimingInput
2.7V
0V
2.7V
0V
2.7V
0V
tw
Input
VOLTAGEWAVEFORMS
SETUP ANDHOLDTIMES
VOLTAGEWAVEFORMS
PROPAGATIONDELAY TIMES
INVERTING ANDNONINVERTINGOUTPUTS
VOLTAGEWAVEFORMS
PULSEDURATION
tPLH
tPHL
tPHL
tPLH
VOH
VOH
VOL
VOL
2.7V
0V
Input Output
Control
Output
Waveform1
S1at6V
(seeNoteB)
Output
Waveform2
S1atGND
(seeNoteB)
VOL
VOH
tPZL
tPZH
tPLZ
tPHZ
3V
0V
V +0.3V
OL
V 0.3V
OH
»0V
2.7V
VOLTAGEWAVEFORMS
ENABLE ANDDISABLETIMES
LOW- ANDHIGH-LEVEL ENABLING
Output
Output
t /t
PLH PHL
t /t
PLZ PZL
t /t
PHZ PZH
Open
6V
GND
TEST S1
NOTES: A.C includesprobeandjigcapacitance.
L
B.Waveform1isforanoutputwithinternalconditionssuchthattheoutputislow,exceptwhendisabledbytheoutputcontrol.
Waveform2isforanoutputwithinternalconditionssuchthattheoutputishigh,exceptwhendisabledbytheoutputcontrol.
C. Allinputpulsesaresuppliedbygeneratorshavingthefollowingcharacteristics:PRR 10MHz,Z =50 ,t 2.5ns,t 2.5ns.£ W £ £
O r f
D. Theoutputsaremeasuredoneatatime,withonetransitionpermeasurement.
Open
1.5V 1.5V
1.5V 1.5V
1.5V 1.5V
1.5V 1.5V
1.5V
1.5V 1.5V
1.5V 1.5V
1.5V
1.5V
SN54LVTH162373 , , SN74LVTH1623733.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCHESWITH 3-STATE OUTPUTS
SCBS261M JULY 1993 REVISED DECEMBER 2006
Figure 1. Load Circuit and Voltage Waveforms
6
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com 25-Sep-2013
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
5962-9763801QXA ACTIVE CFP WD 48 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9763801QX
A
SNJ54LVTH16237
3WD
5962-9763801VXA ACTIVE CFP WD 48 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9763801VX
A
SNV54LVTH16237
3WD
74LVTH162373DGGRE4 ACTIVE TSSOP DGG 48 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
74LVTH162373DGGRG4 ACTIVE TSSOP DGG 48 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
74LVTH162373DLG4 ACTIVE SSOP DL 48 25 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
74LVTH162373DLRG4 ACTIVE SSOP DL 48 1000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
74LVTH162373ZQLR ACTIVE BGA
MICROSTAR
JUNIOR
ZQL 56 1000 Green (RoHS
& no Sb/Br) SNAGCU Level-1-260C-UNLIM -40 to 85 LL2373
SN74LVTH162373DGGR ACTIVE TSSOP DGG 48 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
SN74LVTH162373DL ACTIVE SSOP DL 48 25 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
SN74LVTH162373DLR ACTIVE SSOP DL 48 1000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVTH162373
SN74LVTH162373KR OBSOLETE BGA
MICROSTAR
JUNIOR
GQL 56 TBD Call TI Call TI -40 to 85 LL2373
SNJ54LVTH162373WD ACTIVE CFP WD 48 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9763801QX
A
SNJ54LVTH16237
3WD
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
PACKAGE OPTION ADDENDUM
www.ti.com 25-Sep-2013
Addendum-Page 2
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54LVTH162373, SN54LVTH162373-SP, SN74LVTH162373 :
Catalog: SN74LVTH162373, SN54LVTH162373
Enhanced Product: SN74LVTH162373-EP, SN74LVTH162373-EP
Military: SN54LVTH162373
Space: SN54LVTH162373-SP
NOTE: Qualified Version Definitions:
PACKAGE OPTION ADDENDUM
www.ti.com 25-Sep-2013
Addendum-Page 3
Catalog - TI's standard catalog product
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Military - QML certified for Military and Defense Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
74LVTH162373ZQLR BGA MI
CROSTA
R JUNI
OR
ZQL 56 1000 330.0 16.4 4.8 7.3 1.5 8.0 16.0 Q1
SN74LVTH162373DGGR TSSOP DGG 48 2000 330.0 24.4 8.6 15.8 1.8 12.0 24.0 Q1
SN74LVTH162373DLR SSOP DL 48 1000 330.0 32.4 11.35 16.2 3.1 16.0 32.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
74LVTH162373ZQLR BGA MICROSTAR
JUNIOR ZQL 56 1000 333.2 345.9 28.6
SN74LVTH162373DGGR TSSOP DGG 48 2000 367.0 367.0 45.0
SN74LVTH162373DLR SSOP DL 48 1000 367.0 367.0 55.0
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2012
Pack Materials-Page 2
MECHANICAL DATA
MCFP010B – JANUARY 1995 – REVISED NOVEMBER 1997
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
WD (R-GDFP-F**) CERAMIC DUAL FLATPACK
4040176/D 10/97
48 LEADS SHOWN
48
48
25
56
0.610
(18,80)
0.710
(18,03)
0.7400.640
0.390 (9,91)
0.370 (9,40)
0.870 (22,10)
1.130 (28,70)
1
A
0.120 (3,05)
0.075 (1,91)
LEADS**
24
NO. OF
A MIN
A MAX (16,26)
(15,49)
0.025 (0,635)
0.009 (0,23)
0.004 (0,10)
0.370 (9,40)
0.250 (6,35)
0.370 (9,40)
0.250 (6,35)
0.014 (0,36)
0.008 (0,20)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only
E. Falls within MIL STD 1835: GDFP1-F48 and JEDEC MO-146AA
GDFP1-F56 and JEDEC MO-146AB
MECHANICAL DATA
MTSS003D – JANUARY 1995 – REVISED JANUAR Y 1998
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DGG (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
4040078/F 12/97
48 PINS SHOWN
0,25
0,15 NOM
Gage Plane
6,00
6,20 8,30
7,90
0,75
0,50
Seating Plane
25
0,27
0,17
24
A
48
1
1,20 MAX
M
0,08
0,10
0,50
0°–8°
56
14,10
13,90
48
DIM
A MAX
A MIN
PINS **
12,40
12,60
64
17,10
16,90
0,15
0,05
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated