IntelliSense IS-215T Passive Infra Red Motion Sensor FEATURES Attractive, sleek design Flush mounting Look-down zone Mounting flexibility 1-T1 3 1 0 N N5 E CO M A PLI Sabotage-resistant lens design Selectable sensitivity Tamper switch White light immunity Bug guard Applications Suitable for use with: Security Grade 2; Environmental Class II, Type B IntelliSense IS-215T Passive Infra Red Motion Sensor SPECIFICATIONS Dimensions: 87mm x 62mm x 40mm (h x w x d) Weight: 65.5g Power Requirements: 20mA @ 12Vdc Operating Voltage: 10~14 Vdc Current: 9 mA quiescent Alarm Relay: Form A (NC) \ 100 mA@24 Vdc Tamper Switch: 24V, 100 mA Operating Temperature: -10C ~ +49C RF Immunity: 20 V/m from 10-1000 MHz Suitable for use with EN50131-1 White Light Immunity: 2.500 Lux PIR Sensitivity: Jumper selectable - high and low LED Enable: Can be enabled/disabled by a jumper Wire Channel: 8 mm x 6.5 mm (w x d) Accessories: SMB-10: Universal white swivel mount bracket SMB-10T: Tampered universal white swivel mount bracket SMB-10C: Universal white ceiling mount bracket Approvals: CE approved Detection Patterns Top View Wide Angle Lens Side View Wide Angle Lens Detection Range: 12m x 12m 2.3m PIR Fields of View (2 fields of view per PIR finger): Long Range: 44 Intermediate: 14 Lower: 8 Look-down: 4 3m 6m 9m 12m 15m Floor 12m Zones Down Lower Intermediate Long Range 15m 12m ORDERING Honeywell Security COPYRIGHT 2003 Honeywell International Inc. IS-215T series (UK) /V1.0 05/04 www.honeywell.com/security