TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NPN POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/454 DEVICES LEVELS 2N5660 2N5660U3 2N5661 2N5661U3 2N5662 2N5663 JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25C unless otherwise noted) Symbol 2N5660 2N5662 2N5661 2N5663 Unit Collector-Emitter Voltage VCEO 200 300 Vdc Collector-Base Voltage VCBO 250 400 Vdc Collector-Emitter Voltage VCER 250 400 Vdc Emitter-Base Voltage VEBO 6 Vdc Base Current IB 0.5 Adc Collector Current IC 2.0 Adc Tj, Tstg -65 to +200 C Parameters / Test Conditions Operating & Storage Junction Temperature Range Total Power Dissipation @ TA = +25C (1) @ TC = +100C PT Thermal Resistance, Junction-to-Case RJC Thermal Resistance, Junction-to-Ambient RJA Thermal Resistance, Junction-to-Case 2N5660U3 RJC 2N5661U3 Note: 1. Derate linearly 11.4mW/C for TA > +25C 2. Derate linearly 5.7mW/C for TA > +25C 3. Derate linearly 200mW/C for TC > +100C 4. Derate linearly 150mW/C for TC > +100C 2N5660 2N5661 2N5662 2N5663 2.0 (1) 20 (3) 1.0 (2) 15 (4) W 5.0 87.5 6.7 175 C/W 4.5 4.0 TO-66 2N5660, 2N5661 C/W TO-5 2N5662, 2N5663 ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions Symbol Min. Max. Unit V(BR)CEO 200 300 Vdc V(BR)CER 250 400 Vdc OFF CHARACTERTICS Collector-Emitter Breakdown Voltage IC = 10mAdc 2N5660, U3, 2N5662 2N5661, U3, 2N5663 Collector-Base Breakdown Voltage IC = 10mAdc, RBE = 100 2N5660, U3, 2N5662 2N5661, U3, 2N5663 T4-LDS-0184 Rev. 1 (101686) U3 2N5660U3, 2N5661U3 Page 1 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions Symbol Min. V(BR)EBO 6.0 Max. Unit OFF CHARACTERTICS Emitter-Base Breakdown Voltage IE = 10Adc Collector-Emitter Cutoff Current VCE = 200Vdc VCE = 300Vdc Collector-Base Cutoff Current VCB = 200Vdc VCB = 250Vdc VCB = 300Vdc VCB = 400Vdc ON CHARACTERISTICS (5) Forward-Current Transfer Ratio IC = 50mAdc, VCE = 2.0Vdc IC =0.5Adc, VCE = 5.0Vdc 2N5660, U3, 2N5662 2N5661, U3, 2N5663 2N5660, U3, 2N5662 2N5660, U3, 2N5662 2N5661, U3, 2N5663 2N5661, U3, 2N5663 2N5660, U3, 2N5662 2N5661, U3, 2N5663 2N5660, U3, 2N5662 2N5661, U3, 2N5663 ICES ICBO hFE 40 25 40 25 IC = 1.0Adc, VCE = 5.0Vdc All types 15 IC = 2.0Adc, VCE = 5.0Vdc All types 5.0 Vdc 0.2 0.2 Adc 0.1 1.0 0.1 1.0 Adc mAdc Adc mAdc 120 75 Collector-Emitter Saturation Voltage IC = 1.0Adc, IB = 0.1Adc IC = 2.0Adc, IB = 0.4Adc VCE(sat) 0.4 0.8 Vdc Base-Emitter Saturation Voltage IC = 1.0Adc, IB = 0.1Adc IC = 2.0Adc, IB = 0.4Adc VBE(sat) 1.2 1.5 Vdc Min. Max. Unit 2.0 7.0 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.1Adc, VCE = 5.0Vdc, f = 10MHz Output Capacitance VCB = 10Vdc, IE = 0, 100kHz f 1.0MHz Symbol |hfe| Cobo 45 pF Max. Unit SWITCHING CHARACTERISTICS Parameters / Test Conditions Turn-On Time VCC = 100Vdc; IC = 0.5Adc; IB1 = 15mAdc VCC = 100Vdc; IC = 0.5Adc; IB1 = 25mAdc 2N5660, U3, 2N5662 2N5661, U3, 2N5663 t on 0.25 0.25 s Turn-Off Time VCC = 100Vdc; IC = 0.5Adc; IB1 = -IB2 = 15mAdc VCC = 100Vdc; IC = 0.5Adc; IB1 = -IB2 = 25mAdc 2N5660, U3, 2N5662 2N5661, U3, 2N5663 t off 0.85 1.2 s T4-LDS-0184 Rev. 1 (101686) Symbol Min. Page 2 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com SAFE OPERATING AREA DC Test TC = +100C, 1 cycle, t 1.0s Test 1 VCE = 10Vdc, IC = 2.0Adc VCE = 7.5Vdc, IC = 2.0Adc Test 2 VCE = 40Vdc, IC = 500mAdc VCE = 25Vdc, IC = 600mAdc Test 3 VCE = 200Vdc, IC = 36mAdc VCE = 200Vdc, IC = 27mAdc Test 4 VCE = 300Vdc, IC = 19mAdc VCE = 300Vdc, IC = 14mAdc 2N5660, U3, 2N5661, U3 2N5662, 2N5663 2N5660, U3, 2N5661, U3 2N5662, 2N5663 2N5660, U3 2N5662 2N5661, U3 2N5663 (5) Pulse Test: Pulse Width = 300s, Duty Cycle 2.0%. T4-LDS-0184 Rev. 1 (101686) Page 3 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com PACKAGE DIMENSIONS Ltr CD CH HR HR1 HT LD LL L1 MHD MHS PS PS1 S Dimensions Inches Millimeters Min Max Min Max .470 .500 11.94 12.70 .250 .340 6.35 8.64 .350 8.89 .115 .145 2.92 3.68 .050 .075 1.27 1.91 .028 .034 0.71 0.86 .360 .500 9.14 12.70 .050 1.27 .142 .152 3.61 3.86 .958 .962 24.33 24.43 .190 .210 4.83 5.33 .093 .107 2.36 2.72 .570 .590 14.48 14.99 Notes 7 4 4, 6 4 4, 6 4 3 3 3 NOTES: 1 Dimensions are in inches. 2 Millimeters are given for general information only. 3 These dimensions should be measured at points .050 inch (1.27 mm) +.005 inch (0.13 mm) -.000 inch (0.00 mm) below seating plane. When gauge is not used, measurement will be made at the seating plane. 4 Two places. 5 The seating plane of the header shall be flat within .001 inch (0.03 mm) concave to .004 inch (0.10 mm) convex inside a .930 inch (23.62 mm) diameter circle on the center of the header and flat within .001 inch (0.03 mm) concave to .006 inch (0.15 mm) convex overall. 6 Lead diameter shall not exceed twice LD within L1. 7 Body contour is optional within zone defined by CD. 8 In accordance with ASME Y14.5M, diameters are equivalent to x symbology. 9 Lead 1 is emitter, lead 2 is base, and case is collector. FIGURE 1. Physical dimensions, 2N5660 and 2N5661, (similar to TO-66). T4-LDS-0184 Rev. 1 (101686) Page 4 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Ltr CD CH HD LC LD LL LU L1 L2 TL TW P Q r Dimensions Inches Millimeters Min Max Min Max .305 .355 7.75 9.02 .240 .260 6.10 6.60 .335 .370 8.51 9.40 .200 TP 5.08 TP .016 .021 0.41 0.53 1.500 1.750 38.10 44.45 .016 .019 0.407 0.482 .050 1.27 .250 6.35 .029 .045 0.74 1.14 .028 .034 0.712 0.863 .100 2.54 .050 1.27 .010 0.25 45 TP 45 TP Notes 6 7 7 7 7 7 3 9 4 10 6 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Symbol TL is measured from HD maximum. 4. Details of outline in this zone are optional. 5. Symbol CD shall not vary more than .010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling. 6. Leads at gauge plane .054 inch (1.37 mm) +.001 inch (0.03 mm) - .000 inch (0.00 mm) below seating plane shall be within .007 inch (0.18 mm) radius of TP relative to tab. Device may be measured by direct methods or by gauge. 7. Symbol LU applies between L1 and L2. Dimension LD applies between L2 and LL minimum. 8. Lead number three is electrically connected to case. 9. Beyond r maximum, TW shall be held for a minimum length of .011 inch (0.28 mm). 10. Symbol r applied to both inside corners of tab. 11. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. 12. Lead 1 is emitter, lead 2 is base, and lead 3 is collector. FIGURE 2. Physical dimensions, 2N5662 and 2N5663, (similar to TO-5) T4-LDS-0184 Rev. 1 (101686) Page 5 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Symbol BL BW CH LH LW1 LW2 LL1 LL2 LS1 LS2 Q1 Q2 Term 1 Term 2 Term 3 Dimensions Inches Millimeters Min Max Min Max .395 .405 10.04 10.28 .291 .301 7.40 7.64 .1085 .1205 2.76 3.06 .010 .020 0.25 0.51 .281 .291 7.14 7.39 .090 .100 2.29 2.54 .220 .230 5.59 5.84 .115 .125 2.93 3.17 .150 BSC 3.81 BSC .075 BSC 1.91 BSC .030 0.762 .030 0.762 Collector Base Emitter FIGURE 3. Physical dimensions, 2N5660U3 and 2N5661U3(U3). T4-LDS-0184 Rev. 1 (101686) Page 6 of 6