INTERCONNECTS
.030” dia. Pins Straight and Right Angle
Double Row
www.mill-max.com 516-922-6000
80
Series 802, 803
Ordering Information
Fig. 1
Fig. 2
Fig. 3
Fig. 4
802-XX-0_ _-10-001000
Series 802...20-001 Right Angle Pin Header
802-XX-0 _ _-20-001000
Specify # of pins 02-64
Specify # of pins 02-64
803-XX-_ _ _-10-001000
Series 803...20-001 Right Angle Socket
803-XX-_ _ _-20-001000
Specify # of pins 002-100
Specify # of pins 002-100
Series 803...10-001 Straight Socket
Series 802...10-001 Straight Pin Header
•Receptacles accept .030”
diameter and .025” square pins
such as Series 890 and 892
pin headers.
• Pin interconnects available with
straight (M-M# 7007) or right angle
(M-M# 5005, 5107) solder tails.
(See page 173 for details)
• Sockets are available with straight
(M-M# 1304) or right angle (M-M#
1305, 1306) solder tails. (See
pages 146 & 147 for details)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Pin Plating 10μ” Au 200μ” Sn/Pb 200μ”Sn
SPECIFY PLATING CODE XX= 1090 40
XX= Plating Code
See Below
2O(3
%#
XX= Plating Code
See Below
SPECIFY PLATING CODE XX= 13
91 93 99 41
43
44
Sleeve (Pin)
Contact (Clip)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
2O(3
%#
For RoHS compliance, select
plating code.
For the gold option (XX=10) also change
part number from 802-XX-0XX-X0-001000
to 802-10-0XX-X0-001100
