BC807-16 / BC807-25 / BC807-40 BC807-16 BC807-25 BC807-40 C E SOT-23 B Mark: 5A. / 5B. / 5C. PNP General Purpose Amplifier This device is designed for general purpose amplifier and switching applications at currents to 1.0 A. Sourced from Process 78. Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter Value Units VCEO Collector-Emitter Voltage 45 V VCES Collector-Base Voltage 50 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current - Continuous 1.2 A TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics Symbol PD RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient *Device mounted on FR-4 PCB 40 mm X 40 mm X 1.5 mm. 1997 Fairchild Semiconductor Corporation Max Units *BC807-16 / -25 / -40 350 2.8 357 mW mW/C C/W 3 (continued) Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage IC = 10 mA, IB = 0 45 V V(BR)CES Collector-Base Breakdown Voltage IC = 100 A, IE = 0 50 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 A, IC = 0 5.0 ICBO Collector-Cutoff Current VCB = 20 V VCB = 20 V, TA = 150C V 100 5.0 nA A ON CHARACTERISTICS hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage IC = 100 mA, VCE = 1.0 V - 16 - 25 - 40 IC = 500 mA, VCE = 1.0 V IC = 500 mA, IB = 50 mA VBE(on) Base-Emitter On Voltage IC = 500 mA, VCE = 1.0 V 100 160 250 40 250 400 600 0.7 V 1.2 V NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors. Typical Pulsed Current Gain vs Collector Current 400 V CE = 5V 300 125 C 200 25 C 100 - 40 C 0 0.01 IC 0.1 - COLLECTOR CURRENT (A) 1 V CESAT- COLLE CTOR-EMITTER VOLTAGE (V) h FE - TYP ICAL PULSED CURRE NT GAIN Typical Characteristics Collector-Emitter Saturation Voltage vs Collector Current 0.6 = 10 - 40 C 0.5 0.4 25 C 0.3 0.2 125 C 0.1 0 0.01 0.1 I C - COLLE CTOR CURRENT (A) 1 1.5 BC807-16 / BC807-25 / BC807-40 PNP General Purpose Amplifier (continued) Base-Emitter Saturation Voltage vs Collector Current = 10 1 0.8 - 40 C 25 C 0.6 125 C 0.4 1 IC 10 100 - COLLECTOR CURRENT ( mA) 1000 100 V CB = 40V 10 1 0.1 h FE - GAIN BANDWIDTH PRODUCT (MHz) 25 50 75 100 125 T A - AM BIENT TE MPE RATURE ( C) 150 Base-Emitter ON Voltage vs Collector Current 1 0.8 - 40 C 0.6 25 C 125 C 0.4 0.2 1 10 100 I C - COLLECTOR CURRENT (mA) 1000 40 f = 1.0 MHz 30 3 20 10 0 0 4 8 12 16 20 24 28 V CB - COLLECTOR-BASE VOLTAGE (V) Power Dissipation vs Ambient Temperature Gain Bandwidth Product vs Collector Current 350 250 V CE = 10V 200 150 100 50 0 VCE = 5V Collector-Base Capacitance vs Collector-Base Voltage P D - POWER DISSIPATION (mW) I CBO - COLLECTOR CURRENT (nA) Collector-Cutoff Current vs Ambient Temperature VBE(O N)- BASE-E MITTER ON VOLTAGE (V) (continued) obo - COLLECTOR-BASE CAPACITANCE (pF) V BESAT - BASE-EMITTER VOLTAG E (V) Typical Characteristics 1 10 100 I C - COLLECTOR CURRENT (mA) 1000 BC807-16 / BC807-25 / BC807-40 PNP General Purpose Amplifier 300 250 SOT-23 200 150 100 50 0 0 25 50 75 100 TEMPERATURE ( o C) 125 150 SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. Antistatic Cover Tape Human Readable Label These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. Embossed Carrier Tape 3P 3P 3P 3P SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Standard (no flow code) TNR 3,000 D87Z 7" Dia 13" 187x107x183 343x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) 0.0082 0.0082 Weight per Reel (kg) 0.1175 0.4006 Reel Size Box Dimension (mm) SOT-23 Unit Orientation TNR 10,000 343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label Note/Comments Human Readable Label sample H uman readable Label 187mm x 107mm x 183mm Intermediate Box for Standard Option SOT-23 Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empt y poc kets (c)2000 Fairchild Semiconductor International Leader Tape 500mm minimum or 125 empty pockets September 1999, Rev. C SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D1 D0 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SOT-23 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.013 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 5.2 +/-0.3 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOT-23 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia 7.00 177.8 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 55 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 - 0.429 7.9 - 10.9 8mm 13" Dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 - 0.429 7.9 - 10.9 September 1999, Rev. C SOT-23 Package Dimensions SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 (c)2000 Fairchild Semiconductor International September 1998, Rev. A1 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G