Precision Surface Precision Surface Mount Resistors Mount Resistors PCF Series Series metal film technology *PCF Precision * Precision Extended ohmic 1R - 3M metal range film technology * Extended Precision toohmic 0.01% and 5ppm/C range 1R - 3M * Precision TCR gradesto50,0.01% 25, 15, and 10, 5ppm/C 5ppm/C * TCR Passivated range for superior humidity performance grades 50, 25, 15, 10, 5ppm/C * Passivated Load life stability and humidity to 0.05% range for superior humidity performance Load life stability and humidity to 0.05% Electrical Data - Standard Range Type PCF0201 PCF0402 PCF0603 PCF0805 PCF1206 PCF1210 PCF2010 PCF2512 TCR (ppm/C) 50 25 50 25 15 10 5 50 25 15 10 5 50 25 15 10 5 50 25 15 10 5 50 25 15 10 5 50 25 15 10 5 50 25 15 10 5 Power (W) 0.031 Limiting Element Voltage (V) 15 Ohmic Value Range* 0.5% 0.25% 0.1% 1 49R9-33K 49R9-5K 1 0.05% - 10R-205K 0.063 - 25 49R9-33K 49R9-12K 49R9-5K 2R-1M 0.063 0.01% 4R7-1M 4R7-332K 50 - 4R7-332K 24R9-100K 24R9-15K 1R-2M 0.1 4R7-2M 4R7-511K 100 - 4R7-511K 24R9-200K 24R9-30K 2 1R-2M5 0.125 4R7-2M5 4R7-511K 150 - 4R7-1M 24R9-500K 24R9-50K 2 1R-2M5 0.2 4R7-2M5 24R9-50K - 4R7-1M 150 - 4R7-1M 24R9-500K 24R9-50K 1R-3M 0.25 24R9-30K 2 4R7-3M 24R9-50K - 4R7-1M 150 - 4R7-1M 24R9-500K 24R9-100K 1R-3M 0.5 4R7-3M 4R7-1M 150 - 4R7-1M 24R9-500K 24R9-100K * Standard values E24 or E96. Other values may be available by request. Note 1: PCF0201 also available in 1% tolerance. Note 2: Higher values available on request. General General Note Note TT electronics reserves the right the to make changes in product without notice ornotice liability. Welwyn Components reserves right to make changes in specification product specification without or liability. Allinformation informationisissubject subjectto toTT Welwyn's ownown datadata and and is considered accurate at time of going to print. All electronics' is considered accurate at time of going to print. A subsidiary of www.bitechnologies.com www.irctt.com www.welwyn-tt.com TT electronics plc (c)TT Welwyn Components Limited Bedlington Northumberland NE22 7AA, UK (c)Telephone: electronics plc +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com 03.11 06.12 Precision Surface Mount Resistors Precision Surface Mount Resistors PCF Series PCF Series Electrical Data - High Power Range Electrical Data - High Power Range TCR (ppm/C) TCR Type Type PCF0603H PCF0603H PCF0805H PCF0805H PCF1206H PCF1206H PCF1210H PCF1210H (ppm/C) 50 25 50 15 25 10 155 10 50 525 15 50 10 25 155 50 10 525 15 50 10 25 155 50 10 525 15 50 25 10 155 10 5 50 25 15 10 TCR 5 (ppm/C) 50 25 50 15 25 10 Power Power (W) (W) Limiting Element Limiting(V) Voltage Element Voltage (V) 0.1 75 0.1 75 0.125 150 0.125 Ohmic Value Range Ohmic Value Range * 0.05% 0.25% 0.1% 0.5% 0.5% 0.25% 4R7-1M 150 0.25 0.33 0.33 200 PCF2512H PCF0402P 15 Power (W) 0.75 0.063 25 0.063 4R7-511K 4R7-511K 24R9-30K 4R7-1M 4R7-1M 200 Limiting Element Voltage (V) 0.5% 200 24R9-200K 24R9-200K 24R9-500K 24R9-500K 24R9-500K 24R9-50K 24R9-50K 4R7-1M 24R9-500K Ohmic Value Range * 0.25% 1R-2K 25 24R9-100K 24R9-500K 24R9-50K 4R7-1M 200 24R9-50K 0.1% 0.05% 25R-25K4R7-2K 0.01% 24R9-2K 49R9-12K * Standard values E24 or 50 E96. Other values may be available by request. PCF0603P 4R7-332K 4R7-1M 24R9-50K 200 0.01% 0.01% 24R9-100K 24R9-15K 4R7-1M 4R7-511K 24R9-30K 4R7-1M 4R7-511K 0.25 24R9-15K 4R7-1M 1R-1M 0.05% 4R7-332K 4R7-332K Electrical Data -0.33 Passivated Range 200 PCF2010H Type 0.1% 25R-332K 50 15 25R-100K Electrical Data - Extended High Power Range 50 10R-800K PCF0805P 25 15 TCR 50 (ppm/C) 25 15 50 50 25 25 50 15 25 50 50 25 25 15 50 Type PCF1206P PCF0603X PCF2010P PCF0805X PCF1206X PCF2512P PCF2512X 25 0.1 Power (W) 0.125 100 Limiting Element Voltage 150 (V) Ohmic 25R-200K Value Range * 0.5% 0.25% 0.166 100 10R-332K10R-1M 0.25 150 25R-500K 10R-500K 0.333 0.5 200 150 10R-1M 10R-1M 1 200 0.25 150 1R-100R W TCR Power 0.6 0.05 0.3 0.05 (W) 1.0 (ppm/C) 0.05 0.5 0.05 1.6 0.250 0.8 0.2 0.063 2.0 0.225 1.25 0.2 15 3.2 0.250 1.6 0.2 3.2 0.225 2.6 0.2 0.063 4.9 0.215 2.4 0.2 6.3 0.250 3.1 0.2 25 0.1 15 50 0.05% 0.01% 25R-500K 4R7-100R * Standard values E24 or E96. Other values may be available by request. Physical Data Dimensions (mm) & Data Weight (mg)- Passivated Range Electrical L Tmax A 0201 Type 0402 0603 PCF0402P 0805 1206 1210 PCF0603P 2010 2512 PCF0805P 10R-1M 0.1% 25R-500K Limiting Element 0.26 0.12 0.05 (V) 0.1 0.40 Voltage0.2 0.55 0.3 0.2 25 0.4 0.2 0.65 0.65 0.5 0.2 0.50 50 0.45 0.2 0.65 0.5 0.2 0.65 0.5 0.2 100 C 0.12 0.05 0.2 0.5% 0.1 0.3 0.2 0.4 0.2 0.5 0.2 0.5 0.2 0.6 0.2 0.6 0.2 Wt Ohmic Value Range * 1 0.25% 0.1% 3 6 25R-25K A 9 49R9-12K 20 L W A 25 25R-332K Wrap-around terminations 36 25R-100K (3 faces) 55 10R-800K C T 25R-200K 10R-1M Construction 25 0.125 150 PCF1206P 25R-500K A thin-film material is15selectively deposited on a 96% alumina substrate together with metallic contacts at each end of the resistor. 50 are heat treated to give the required TCR and stability, then a precisely controlled laser trim process adjusts The unadjusted resistors 10R-1M 25 0.25 150 PCF2010P the resistance value. 15 Epoxy protection is applied and wrap-around terminations are added and plated with Nickel then Tin. Each 25R-500K resistor is measured immediately before packing into tape. 50 PCF2512P 25 0.5 150 10R-1M 15 10R-1M Terminations *The Standard E24 or E96.with Other100% values may available by request. chipsvalues are supplied Sn be matte plated wrap-around terminations suitable for soldering. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 06.12 Precision Surface Mount Resistors Precision Surface Mount Resistors PCF Series PCF Series Physical Data L 0201 0402 0603 0805 1206 1210 2010 2512 0.58 0.05 1.0 0.05 1.6 0.2 2.0 0.2 3.05 0.15 3.10 0.15 4.9 0.2 6.3 0.2 Dimensions (mm) and Weight W T max A 0.29 0.05 0.26 0.15 0.05 0.5 0.05 0.40 0.2 0.1 0.8 0.2 0.55 0.3 0.2 1.25 0.2 0.65 0.4 0.25 1.55 0.15 0.65 0.35 0.25 2.4 0.15 0.50 0.55 0.25 2.4 0.2 0.65 0.5 0.25 3.1 0.2 0.65 0.5 0.25 C 0.12 0.05 0.2 0.1 0.3 0.2 0.3 0.2 0.42 0.2 0.4 0.2 0.6 0.3 0.6 0.3 Wt 1 3 6 9 20 25 36 55 C T A L W A Wrap-around terminations (3 faces) Construction A thin-film material is selectively deposited on a 96% alumina substrate together with metallic contacts at each end of the resistor. The unadjusted resistors are heat treated to give the required TCR and stability, then a precisely controlled laser trim process adjusts the resistance value. Epoxy protection is applied and wrap-around terminations are added and plated with Nickel then Tin. Each resistor is measured immediately before packing into tape. Terminations The chips are supplied with 100% Sn matte plated wrap-around terminations suitable for soldering. Performance Data - Standard Range Test Parameters Load life Humidity Short term overload High temperature operation Temperature cycle Resistance to solder heat Solderability Conditions Maximum change (+0.05R) 1000 hours rated load @ 70C 1000 hours @ 40C, 90 - 95%RH 6.25 x rated Power , or 2 x LEV, for 5 sec 1000 hours at 125C 5 cycles -55 C, 125C 270C, 10 sec 235C, 2 sec 0.01% tolerance 0.05% tolerance Chip size 0603 to 2512 0603 to 2512 0402 0.05% 0.25% 0.5% 0.05% 0.3% 0.3% 0.05% 0.5% 0.5% 0.25% 0.25% 0.25% 0.05% 0.1% 0.1% 0.05% 0.2% 0.2% 95% minimum coverage Performance Data - High Power Range/Extended High Power Range Test Parameters Load life Humidity Short term overload High temperature operation Temperature cycle Resistance to solder heat Solderability Conditions Maximum change (+0.05R) 1000 hours rated load @ 70C 1000hrs @ 40C, 90 - 95%RH 6.25 x rated Power, or 2 x LEV, for 5 sec 1000 hours at 155C 5 cycles -55C, 150C 270C, 10 sec 235C, 2 sec 0.5% 0.5% 0.5% 0.5% 0.25% 0.2% 95% minimum coverage Performance Data - Passivated Range Test Parameters Load life Humidity Short term overload High temperature operation Temperature cycle Resistance to solder heat Solderability Conditions 1000 hours rated load @ 70C 1000hrs @ 40C, 90 - 95%RH 6.25 x rated Power, or 2 x LEV, for 5 sec 1000 hours at 125C 5 cycles -55 C, 125C 270C, 10 sec 235C, 2 sec General Note (c) Welwyn Components Limited Bedlington Northumberland NE22 7AA, UK TT electronics reserves the right to make changes in product specification without notice or liability. Maximum change (+0.05R) 0603 to 2512 0.05% 0.05% 0.02% 0.05% 0.02% 0.02% 0402 0.25% 0.5% 0.1% 0.5% 0.1% 0.1% 95% minimum coverage Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com All information is subject to TT electronics' own data and is considered accurate at time of going to print. 03.11 www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 06.12 Precision Surface Precision Surface Mount Resistors Mount Resistors PCF PCFSeries Series Derating Curve Solderability The terminations have an electroplated nickel barrier and tin coating. This ensures excellent 'leach' resistance properties and solderability. Packaging PCF Resistors are supplied taped and reeled as per IEC 286-3. Application Notes PCF resistors are ideally suited for handling by automatic methods due to their rectangular shape and the small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations. Wrap-around terminations provide good leach properties and ensure reliable contact. Due to the robust construction, the PCF can be immersed in the solder bath for 30 seconds at 260 C. This enables the resistor to be mounted on one side of a printed circuit board and wire-leaded components applied on the other side. PCF resistors themselves can operate at a maximum temperature of 125 C (see performance above) (155 C for High Power grades). For soldered resistors, the joint temperature should not exceed 110 C. This condition is met when the stated power levels at 70 C are used. Ordering Procedure P kilohms PCF 0603 - 11 - 1K54 B I Type Size Range Standard High Power H Extended Power X P Passivated TCR 13 12 11 5ppm/C R 25ppm/ C 10ppm/C 02 50ppm/ C 15ppm/C Resistance value (IEC62 Code) Tolerance L 0.01% C 0.25% W 0.05% D 0.5% B 0.1% Packing I 0201, 0402 0603, 0805, 1206, 1210 2010, 2512 T1 0402, 0603, 0805, 1206, 2010, 2512 10,000/reel 5000/reel Standard 4000/reel 1000/reel Please enquire to confirm availability of 1000 piece reels General Note (c)electronics Welwynreserves Components Bedlington Northumberland NE22notice 7AA, or UKliability. TT the right toLimited make changes in product specification without Telephone: +44 (0) 1670 Facsimile: +44and (0) 1670 829465accurate Email: at info@welwyn-tt.com 03.11 All information is subject to 822181 TT electronics' own data is considered time of going to print.Website: www.welwyn-tt.com www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 06.12