The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features 1. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B data wiring standard, meeting transmission performance of Enhanced Category 5. Supports Gigabit Ethernet (1000BASE-T) and Fast Ethernet (100BASE-TX) high-speed LAN transmission. Protected latch tab 2. EMI protection (TM21*P-88P) 360 coverage of the engagement area with a metal shield assures protection against electromagnetic interference. When mated with corresponding connector the shield surfaces are securely connected to provide continuous circuit. 3. Protected latch tab (TM21P-88P) Flexible case extends over the release tab preventing the possibility of breaking-off during handling of the complete cable assembly. 4. Termination of conductors 1 Self located 24 AWG conductors (solid or stranded) are terminated against pre-inserted contacts using simple tooling. 5. Simplified termination (TM21*P-88P) 2 Removeable one piece cover allows easy access to the termination areas. 6. Conforms to the ISO 8877 Standard (ISDN Interface Connector) 1 1 Applications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment and other equipment requiring this type of simple and reliable connection. Cover Installation Procedure 2008.12w 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesModular have been discontinued, Plug or will be discontinued soon. Please check to the Enhanced products statusCategory on the Hirose5website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM21P Connectors Compliant Standards Product Specification Current rating 1A Voltage rating 125 V AC Operating temperature range-25c to +60c (Note) Rating Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Withstanding voltage (between adjacent contacts) No flashover or insulation breakdown 500 V AC / one minute 3. Withstanding voltage (between contact and shield) No flashover or insulation breakdown 1500 V AC / one minute 4. Contact resistance 230 m ohms max. 100mA DC 5. Vibration No electrical discontinuity of 5 ms or more Contact resistance: 250m ohms max. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis No electrical discontinuity of 5 ms. min. Contact resistance: 250m ohms max. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability (mating/un-mating) Contact resistance: 250m ohms max. 200 8. Temperature cycle Contact resistance: 250 m ohms max. 6. Shock Temperature: -55c/+5c to +35c/+85c/+5c to +35c Duration: 30/5/30/5(Minutes) 5 cycles Insulation resistance: 100 M ohms min. 9. Humidity 10. Salt Spray Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 10 M ohms min. (Dry state) 500 hours at temperature of 40c and humidity of 90% to 95% Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Note :Includes temperature rise caused by current flow. Materials Material Finish Remarks Insulator Part Polycarbonate Color: Clear UL94V-2 Contacts Copper alloy Contact area: Gold plating ------- Shield Copper alloy Tin plating ------- Conductor holding tray Polycarbonate Color: Clear UL94V-2 Polyamide Color: Light beige (Note) UL94V-2 Cover Note :Cover available in various colors. Refer to page 3. Ordering information Plugs- Shielded Plugs - Non-shielded TM21 C P - 8 8P 1 2 2 1 3 TM22P - 8 8P 4 1 2 3 1 Series name TM21P: Shielded 1 Series name 2 Cover Type Blank: Protective latch cover 2 Size 8 : For 8 contacts C: Short cover 3 Inserted contacts 8P: 8 3 Size 8: For 8 contacts 4 Inserted contacts 8P: 8 TM22P : Non-shielded The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosePlug websiteConnectors RoHS search at www.hirose-connectors.com, or contact your Hirose representative. TM21P SeriesModular Compliant to Enhanced Category 5 sales Standards Plug Connectors Shielded (R Cover (34) 30.2 9 16.6 11.7 6.09 ) 3.5 6.7 Conductor holding tray Contact No. 1 3.45 29.5 (0.6) 6.6 12.9 17.5 Contact No.8 5.4 9.05 CL No. Cover Color TM21P-88P Part Number 222-2862-9-02 Light beige TM21P-88P(02) 222-2862-9-02 Medium gray TM21P-88P(03) 222-2862-9-03 Black TM21P-88P(04) 222-2862-9-04 Natural light gray TM21P-88P(05) 222-2862-9-05 Red TM21P-88P(06) 222-2862-9-06 Green TM21P-88P(07) 222-2862-9-07 Blue TM21P-88P(08) 222-2862-9-08 Yellow TM21P-88P(09) 222-2862-9-09 Orange BCover installed RoHS YES BMated with corresponding receptacle (shown for reference only) (34) (13.4) (44.65) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesModular have been discontinued, Plug or will be discontinued soon. Please check to the Enhanced products statusCategory on the Hirose5website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM21P Connectors Compliant Standards Plug Connectors Shielded-Short Cover 6.7 17.2 TM21CP-8 TM21CP-8 9 (R 3. 5) 30.2 10.4 (22.4) 11.7 6.09 Cover Conductor holding tray 3.45 12.9 (0.6) 6.6 17.5 Contact No.8 Contact No.1 5.4 9.05 Part Number CL No. Cover color RoHS TM21CP-88P(03) 222-2884-1-03 Black YES Note: For other colors contact Hirose sales representative. BCover installed BMated with corresponding receptacle (shown for reference only) (21.7) TM21CP-8 TM21CP-8 (32.35) (13.4 ) BApplicable Shielded Cable Specifications Specifications Solid copper conductor: 0.5mm dia. Jacket Conductor Shield Stranded copper conductor: AWG#24 (Dia. 0.2mm x 7 pcs) Insulation Conductor Individual conductor insulation dia. (0.9mm to 1.0mm) Drain wire AWG#26 (tin coated) Overall jacket dia. (dia. 6.6mm) Drain wire Note: For cable termination procedures refer to: [TM21P-88P Cable Termination Procedure Manual] (ETA-E2349) and [TM21CP-88P Cable termination Procedure Manual] (ETA-E2353). Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosePlug websiteConnectors RoHS search at www.hirose-connectors.com, or contact your Hirose representative. TM21P SeriesModular Compliant to Enhanced Category 5 sales Standards Plug Connectors Non-shielded Conductor holding tray 6.6 9.05 (0.6) 7.9 14.2 5.4 3.45 6.09 11.7 22.5 Contact No.1 Part Number CL No. RoHS TM22P-88P 222-2899-9 YES Contact No.8 BMated with corresponding receptacle (shown for reference only) (11.85) BApplicable Non-shielded Cable Specifications Specifications Solid copper conductor: 0.5mm dia. Jacket Conductor Stranded copper conductor: AWG#24 (Dia. 0.2mm x 7 pcs) Individual conductor insulation dia. (0.9mm to 1.0mm) Overall jacket dia. (dia. 5.4mm to 5.7mm) Conductor Insulation Note: For cable termination procedures refer to: [TM22P-88P Cable Termination Procedure Manual] (ETA-E2381). Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesModular have been discontinued, Plug or will be discontinued soon. Please check to the Enhanced products statusCategory on the Hirose5website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM21P Connectors Compliant Standards BHand termination tools For contact/conductor termination (For cable and shield crimping) Part Number CL No. HT601 / TM21P-88P 902-2133-1 For contact/conductor termination (Non-shielded connectors) HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) 6 Part Number CL No. HT601-TM23/22P-88P CL902-2128-1 Applicable connector TM22P-88P TM23P-88P Applicable connector TM21P-88P TM21CP-88P The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosePlug websiteConnectors RoHS search at www.hirose-connectors.com, or contact your Hirose representative. TM21P SeriesModular Compliant to Enhanced Category 5 sales Standards BTechnical Documentation CAT5e Transmission Characteristics Data These are the representative values of the various transmission characteristics data for connector assemblies TM21P-88P and TM21R-5C-88-LP when fully mated. * Signal Attenuation Attenuation(dB) 0.5 0.4 0.3 0.2 0.1 0 0 10 20 30 40 50 60 70 80 90 100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec (Each two numbers are for the pair of individual contact position.) * Near-End Crosstalk Attenuation (NEXT) 120 NEXT(dB) 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 90 100 Frequency(MHz) 1,2-3,6 1,2-4,5 1,2-7,8 3,6-4,5 3,6-7,8 4,5-7,8 CAT5e Spec * Return Loss Return Loss(dB) 80 60 40 20 0 0 10 20 30 40 50 60 70 80 90 100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesModular have been discontinued, Plug or will be discontinued soon. Please check to the Enhanced products statusCategory on the Hirose5website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. TM21P Connectors Compliant Standards * Far-End Crosstalk Attenuation (FEXT) 120 FEXT(dB) 100 80 60 40 20 0 0 10 20 30 1,2-3,6 3,6-4,5 4,5-7,8 CAT-5e Spec 40 50 60 Frequency(MHz) 1,2-4,5 3,6-7,8 7,8-1,2 70 80 90 100 3,6-1,2 4,5-3,6 7,8-4,5 1,2-7,8 4,5-1,2 7,8-3,6 (Each two numbers are for pair of individual contact position.) * Propagation Delay 3 Delay(ns) 2.5 2 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 90 100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec * Propagation Delay skew 1.4 Delay Skew(ns) 1.2 1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 70 80 90 100 Frequency(MHz) Measurement Value (R) 8 CAT5e Spec 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.