Non-Stripping Multi-Connection Wire Connector Features: * * * * * * * No need to remove wire insulation No need to splice the wires No need for taping Water and dust resistant (IP 33) Absolutely free from electric shock As easy as 1-2-3 operation Accommodate all kinds of electric wires Technical Specification: mm2 AWG Connection Method Number of wire Connection Method Wire type Waterproof status(IP) Measured voltage EN(V) Connector type Measured shock voltage (kV) Connected Loss (Ohm) 0.75 19 ~ 17 Caged wire clamps without stripping & splicing 1 or 2 Auto strip and connection in connector Solid and/or Stranded IP 33 600 I Type 6 0.001 Maximum Current (A) 10 Tensile strength (NT) 77 Weight (g) 1 Colour Charcoal Height (a : mm) 6 Width (b : mm) 6 Width (T-type) (d : mm) Depth (c : mm) 30 Strip length from (mm) 7 Strip length to (mm) 9 Connection points 4 Metal thickness HS code 0.4 853690 www.element14.com www.farnell.com www.newark.com Page <1> 23/09/14 V1.2 Non-Stripping Multi-Connection Wire Connector Connection Diagram Product I-2 mm2 0.75 Wire Type Solid or Stranded Number of Wire 1 : 1 Connection Picture Diagram Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <2> 23/09/14 V1.2 Non-Stripping Multi-Connection Wire Connector Assembly Instructions: Part Number Table Description Part Number Non-Stripping, Multi-Connection Wire Connector MCI002141S Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 23/09/14 V1.2