SUT-H 6.3x32, 10A to 25A
SCHURTER part numbers 8020.0602.H to 8020.0606.H
Type
SUT-H
Product group
Fuses
Business unit
Circuit Protection
Weight range
ca. 3.00g
Part complies with EU RoHS directive: Yes
Exemption
7(a) - Lead in high melting temperature type solders (i.e. lead-
based alloys containing 85 % by weight or more lead)
Fluctuation margin
n/a
Part complies with China RoHS directive: No
Part complies with IEC definition of halogen free products: Yes
Company
SCHURTER AG
Important remarks:
1) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by
weight.
Higher limits are accepted if the substance or material is legally regulated (see note no. 2).
2) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and
is available at http://echa.europa.eu/candidate-list-table
3) Substances, materials etc. with possible harmful effects on human beings and the environment are
listed.
4) There are no risks for human beings and to the environment if products are properly used as
designated.
This shall not apply to risks caused during procedures for disposal etc.
5) All statements herein are based on our present knowledge. If our products are used properly,
there are no risks to human beings and/or the environment.
Address
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
E-mail
substances@schurter.com
Internet
www.schurter.com
Certified Management
Systems
ISO 9001 since 1990
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic
Manufacturer’s Association (ZVEI).
Composition part
Material group
Materials
CAS
if applicable
Average mass
[weight-%]
Sum
[%]
Traces
Metal parts
Silver
Ag
7440-22-4
1.30
40.80
Copper
Cu
7440-50-8
13.40
Nickel
Ni
7440-02-0
0.40
Lead
Pb
7439-92-1
16.80
Exemption
Tin
Sn
7440-31-5
1.80
Zinc
Zn
7440-66-6
7.10
Other parts
Ceramic
46.30
46.30
Sand
12.90
12.90
Sum in total:
100
SUT-H 6.3x32, 10A to 25A
SCHURTER part numbers 8020.0602.H to 8020.0606.H
Type
SUT-H
Product group
Fuses
Business unit
Circuit Protection
Weight range
ca. 3.00g
Part complies with EU RoHS directive: Yes
Exemption
7(a) - Lead in high melting temperature type solders (i.e. lead-
based alloys containing 85 % by weight or more lead)
Fluctuation margin
n/a
Part complies with China RoHS directive: No
Part complies with IEC definition of halogen free products: Yes
Company
SCHURTER AG
Important remarks:
1) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by
weight.
Higher limits are accepted if the substance or material is legally regulated (see note no. 2).
2) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and
is available at http://echa.europa.eu/candidate-list-table
3) Substances, materials etc. with possible harmful effects on human beings and the environment are
listed.
4) There are no risks for human beings and to the environment if products are properly used as
designated.
This shall not apply to risks caused during procedures for disposal etc.
5) All statements herein are based on our present knowledge. If our products are used properly,
there are no risks to human beings and/or the environment.
Address
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
E-mail
substances@schurter.com
Internet
www.schurter.com
Certified Management
Systems
ISO 9001 since 1990
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic
Manufacturer’s Association (ZVEI).
Composition part
Material group
Materials
CAS
if applicable
Average mass
[weight-%]
Sum
[%]
Traces
Metal parts
Silver
Ag
7440-22-4
1.30
40.80
Copper
Cu
7440-50-8
13.40
Nickel
Ni
7440-02-0
0.40
Lead
Pb
7439-92-1
16.80
Exemption
Tin
Sn
7440-31-5
1.80
Zinc
Zn
7440-66-6
7.10
Other parts
Ceramic
46.30
46.30
Sand
12.90
12.90
Sum in total:
100
owner
ammannsa creation date
20.03.2020 release date
27.03.2020 released by
hodelbe change order no
2018089 rev
Apage
1 of 2 D10-043-974
Substance Declaration PCS SUT-H
SUT-H 6.3x32, 30A to 50A
SCHURTER part numbers 8020.0606.H to 8020.0609.H
Type
SUT-H
Product group
Fuses
Business unit
Circuit Protection
Weight range
ca. 3.00g
Part complies with EU RoHS directive: Yes
Exemption
7(a) - Lead in high melting temperature type solders (i.e. lead-
based alloys containing 85 % by weight or more lead)
Fluctuation margin
n/a
Part complies with China RoHS directive: No
Part complies with IEC definition of halogen free products: Yes
Company
SCHURTER AG
Important remarks:
6) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by
weight.
Higher limits are accepted if the substance or material is legally regulated (see note no. 2).
7) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and
is available at http://echa.europa.eu/candidate-list-table
8) Substances, materials etc. with possible harmful effects on human beings and the environment are
listed.
9) There are no risks for human beings and to the environment if products are properly used as
designated.
This shall not apply to risks caused during procedures for disposal etc.
10) All statements herein are based on our present knowledge. If our products are used properly,
there are no risks to human beings and/or the environment.
Address
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
E-mail
substances@schurter.com
Internet
www.schurter.com
Certified Management
Systems
ISO 9001 since 1990
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic
Manufacturer’s Association (ZVEI).
Composition part
Material group
Materials
CAS
if applicable
Average mass
[weight-%]
Sum
[%]
Traces
Metal parts
Silver
Ag
7440-22-4
0.50
41.80
Copper
Cu
7440-50-8
15.50
Nickel
Ni
7440-02-0
0.20
Lead
Pb
7439-92-1
16.50
Exemption
Tin
Sn
7440-31-5
2.10
Zinc
Zn
7440-66-6
7.00
Other parts
Ceramic
45.30
45.30
Sand
12.90
12.90
Sum in total:
100
SUT-H 6.3x32, 30A to 50A
SCHURTER part numbers 8020.0606.H to 8020.0609.H
Type
SUT-H
Product group
Fuses
Business unit
Circuit Protection
Weight range
ca. 3.00g
Part complies with EU RoHS directive: Yes
Exemption
7(a) - Lead in high melting temperature type solders (i.e. lead-
based alloys containing 85 % by weight or more lead)
Fluctuation margin
n/a
Part complies with China RoHS directive: No
Part complies with IEC definition of halogen free products: Yes
Company
SCHURTER AG
Important remarks:
6) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by
weight.
Higher limits are accepted if the substance or material is legally regulated (see note no. 2).
7) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and
is available at http://echa.europa.eu/candidate-list-table
8) Substances, materials etc. with possible harmful effects on human beings and the environment are
listed.
9) There are no risks for human beings and to the environment if products are properly used as
designated.
This shall not apply to risks caused during procedures for disposal etc.
10) All statements herein are based on our present knowledge. If our products are used properly,
there are no risks to human beings and/or the environment.
Address
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
E-mail
substances@schurter.com
Internet
www.schurter.com
Certified Management
Systems
ISO 9001 since 1990
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic
Manufacturer’s Association (ZVEI).
Composition part
Material group
Materials
CAS
if applicable
Average mass
[weight-%]
Sum
[%]
Traces
Metal parts
Silver
Ag
7440-22-4
0.50
41.80
Copper
Cu
7440-50-8
15.50
Nickel
Ni
7440-02-0
0.20
Lead
Pb
7439-92-1
16.50
Exemption
Tin
Sn
7440-31-5
2.10
Zinc
Zn
7440-66-6
7.00
Other parts
Ceramic
45.30
45.30
Sand
12.90
12.90
Sum in total:
100
owner
ammannsa creation date
20.03.2020 release date
27.03.2020 released by
hodelbe change order no
2018089 rev
Apage
2 of 2 D10-043-974
Substance Declaration PCS SUT-H
