Model 4000A & 4001A Accelerometer Silicon MEMS Accelerometer Signal Conditioned Output Temperature Calibrated Low Cost, Lightweight The Model 4000A & 4001A are 4001A Connector Attachment economical signal conditioned accelerometers with integral temperature compensation. The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The signal conditioned output incorporates a 2.5V reference that offers the user a differential or single-ended output. dimensions 4000A Dimensions FEATURES * * * * * * * 2g to 200g Dynamic Range High Over-Range Protection Signal Conditioned Output Low Power Consumption Lightweight Gas Damping 8 to 36Vdc Excitation Voltage APPLICATIONS * * * * * * * Low Frequency Monitoring Transportation Vibration Sensing Test & Instrumentation Machine Control Motion Analysis Tilt Model 4000A & 4001A Rev A 32 Journey Ste. 150 Aliso Viejo, CA 92656 4001A Dimensions www.meas-spec.com 949-716-5377 01/15/2010 enduser@meas-spec.com Model 4000A & 4001A Accelerometer performance specifications All values are typical at +24C, 100Hz and 12Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Parameters DYNAMIC Range (g) Sensitivity (mV/g) Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Damping Ratio Shock Limit (g) 2 1000 0-200 700 0.5 <3 0.7 5000 ELECTRICAL Zero Acceleration Output (mV) Excitation Voltage (Vdc) Excitation Current (mA) Bias Voltage (Vdc) Output Resistance () Insulation Resistance (M) Turn On Time (msec) Residual Noise (V RMS) Spectral Noise (g/Hz) Ground Isolation Notes 5 400 0-300 800 0.5 <3 0.7 5000 10 200 0-350 1000 0.5 <3 0.7 5000 20 100 0-600 1500 0.5 <3 0.7 5000 50 40 0-800 4000 0.5 <3 0.7 5000 100 20 0-1300 6000 0.5 <3 0.7 5000 200 10 0-1500 8000 0.5 <3 0.6 5000 100 100 100 8 to 36 8 to 36 8 to 36 <5 <5 <5 2.5 2.5 2.5 <100 <100 <100 >100 >100 >100 <100 <100 <100 500 300 300 35 38 75 Isolated from Mounting Surface 100 8 to 36 <5 2.5 <100 >100 <100 350 132 100 8 to 36 <5 2.5 <100 >100 <100 400 316 100 8 to 36 <5 2.5 <100 >100 <100 350 516 100 8 to 36 <5 2.5 <100 >100 <100 400 1033 Differential ENVIRONMENTAL Thermal Zero Shift (%FSO/C) Thermal Sensitivity Shift (%/C) Operating Temperature (C) Compensated Temperature (C) Storage Temperature (C) 0.014 0.014 0.028 0.028 -20 to 85 -20 to 85 -40 to 90 0.014 0.028 0.014 0.028 0.014 0.028 0.014 0.028 Typical Typical PHYSICAL Case Material Cable Weight (grams) Mounting Mounting Torque AWG Anodized Aluminum PFA Insulated Leads, Braided Shield, PU Jacket 7 2x #4 or M3 Screws 3 lb-in (0.3 N-m) #28 0.014 0.028 Wiring color code: 4000A: Supplied accessories: AC-D02295 Mating Pins (for model 4001A) Optional accessories: AC-D02652 101 Triaxial Mounting Block Three Channel DC Signal Conditioner Amplifier 4001A: 5% <1 Typical @100Vdc Passband Passband +Excitation = Red; -Excitation = Black; +Output = Green; -Output = White; Programming = Brown (brown wire is used for programming and is not to be connected) +Excitation = Pin 3; -Excitation = Pin 1; +Output = Pin 4; -Output = Pin 2; The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. schematic 4000A Schematic Model 4000A & 4001A Rev A 32 Journey Ste. 150 Aliso Viejo, CA 92656 4001A Schematic www.meas-spec.com 949-716-5377 01/15/2010 enduser@meas-spec.com Model 4000A & 4001A Accelerometer performance specifications 2g Range 5g Range 10g Range 20g Range 50g Range 100g-200g Range Typical Frequency Response 40 35 30 25 Sensitivity Deviation (%) 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 10 100 1000 10000 Frequency (Hz) 2g Range 5g Range 10g Range 20g Range 50g Range 100g Range 200g Range Typical Phase Response 40 35 30 25 20 Phase (degrees) 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 10 100 1000 10000 Frequency (Hz) ordering info PART NUMBERING Model Number+Range+ Cable Length 4000A-GGG-CCC l l l l_____Cable (060 is 60 inches) l___________Range (020 is 20g) 4001A-GGG-CCC l l l l_____Cable (014 is 14 inches) l___________Range (020 is 20g) Example: 4000A-020-060 Model 4000A, 20g, 60" (5ft) Cable Example: 4001A-020-014 Model 4001A, 20G, 14" Cable Model 4000A & 4001A Rev A 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 01/15/2010 enduser@meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 4000A-002-060