Switches & Pilot Devices o16mm - L6 Series L6 Series -- Miniature Switches and Pilot Devices Switches & Pilot Lights Key features of the 5/8" L6 Series include: * * * * * * * 5/8" (16mm) mounting holes Locking lever removable contact blocks Solder terminal or PCB terminal options Available assembled or as sub-components Worldwide approvals Incandescent or LED illumination Snap action contacts CSA Certified File No. LR21451 Display Lights UL Recognized File No. E55996 Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14 Operating Temperature Operation: -25 to +55C (without freezing), 45 to 85% RH Storage: -30 to +80C (without freezing) Vibration Resistance 5 to 55Hz, 1.0 peak-peak amplitude max Shock Resistance Operating limit: 100 m/sec2 (approximately 10G) Damage limit: 1000 m/sec2 (approximately 100G) Mechanical Life Momentary pushbuttons 2,000,000 operations minimum All others: 250,000 operations minimum IP65 (conforming to IEC 60529) Dielectric Strength Switch unit: between live and ground: 2500 volt AC, 1 minute between terminals of different poles: 2500 volt AC, 1 minute between terminals of same pole: 1000 volt AC, 1 minute Illumination unit: between live part and ground: 2500 volt AC, 1 minute Insulation Resistance 100M minimum (using 500V DC megger) Rated Insulation Voltage 250V AC/DC Rated Thermal Current Gold Contacts (pcb): 3A Silver Contacts (solder): 5A Contact Resistance 50 maximum initial value Silver Contacts (Solder Terminals) 30V 125V 250V -- 5A 2A -- 2A 1.5A 3A 0.4A -- 1A 0.2A -- Minimum Recommended Load (reference value for silver contacts) 5V AC/DC, 1mA Terminal Style 0.110" Solder Tab /PCB Contact Form Snap Action, Double Throw Gold Clad Contacts (PCB terminals) 30V 125V AC inductive 0.1A DC resistive 0.1A -- Solder Tab: Pure Silver /PCB: Gold Plated Silver Electrical Life (at full load) Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour) All others: 100,000 operations minimum (1200 operations / hour) Lamp Current Draw 5V DC LED: 8mA 6V AC/DC LED: 7mA 12V AC/DC LED: 8mA 24V AC/DC LED: 8mA 120V AC = 8mA Lamp Life Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity) USA: 800-262-IDEC Circuit Breakers Contact Material Terminal Blocks AC resistive AC inductive DC resistive DC inductive Timers Degree of Protection Rated Operating Current Lamp Ratings Relays & Sockets Contact Ratings Registration No. R9551089 (E-stops) Registration No. J9551458 (all other switches) Registration No. R95650511 (Pilot Lights) 6V AC/DC incandescent: 100 mA 12V AC/DC incandescent: 50 mA 24V AC/DC incandescent: 25 mA Canada: 888-317-IDEC 471 Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Built-in LED Lamp Ratings Model LFTD-5k LFTD-1k 5V DC 12V AC/DC Lamp Base Display Lights LFTD-H2k SX6S/8x5.4 Rated Voltage Operating Voltage Current Draw 24V AC/DC 120V AC 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 120V AC 5% AC -- 9mA 9mA 8mA DC 8mA 8mA 8mA -- Color Code k Specify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Lamp Base Color Same as illumination color Voltage Marking Stamped on the lamp base Life (reference value) Approx. 50,000 hours A, R, W, Y (+) A, R, W, Y (-) LED Chip Internal Circuit G, S (+) Relays & Sockets LFTD-2k Protection Diode G, S Zener Diode (-) Non-Illuminated Pushbuttons (Assembled) Non-Illuminated Pushbuttons Style Operation Round Momentary Maintained Square Timers Momentary Maintained Rectangular Momentary Maintained Terminal Blocks Oversize Round Flush Momentary Maintained Contact Terminal Style Solder Tab PCB SPDT LA1B-M1C5-j LA1B-M1C1V-j DPDT LA1B-M1C6-j LA1B-M1C2V-j SPDT LA1B-A1C5-j LA1B-A1C1V-j DPDT LA1B-A1C6-j LA1B-A1C2V-j SPDT LA2B-M1C5-j LA2B-M1C1V-j DPDT LA2B-M1C6-j LA2B-M1C2V-j SPDT LA2B-A1C5-j LA2B-A1C1V-j DPDT LA2B-A1C6-j LA2B-A1C2V-j SPDT LA3B-M1C5-j LA3B-M1C1V-j DPDT LA3B-M1C6-j LA3B-M1C2V-j SPDT LA3B-A1C5-j LA3B-A1C1V-j DPDT LA3B-A1C6-j LA3B-A1C2V-j SPDT HA1B-M1C5-j HA1B-M1C1V-j DPDT HA1B-M1C6-j HA1B-M1C2V-j SPDT HA1B-A1C5-j HA1B-A1C1V-j DPDT HA1B-A1C6-j HA1B-A1C2V-j Style Oversize Round Extended Operation Momentary Maintained Oversize Square Flush Momentary Maintained Oversize Square Extended Momentary Maintained Mushroom Momentary Maintained Circuit Breakers 1. In place of j specify Button Color Code from table. 2. Illuminated (translucent) style lenses also available, specify as such: instead of LA1B-M1C5-j use LA1B-M1C5L-k in place of k (specify Lens Color Code from next page.) 3. PCB terminal models also available with silver contacts (change "1" or "2" to "5" or "6" respectively, ie LA1B-M1C1V-j becomes LA1B-M1C5V-j). jButton Color Codes 472 Color Code Color Code Black B Blue S Green G White W Red R Yellow Y www.idec.com Contact Terminal Style Solder Tab PCB HA1B-M2C5-j HA1B-M2C1V-j DPDT HA1B-M2C6-j HA1B-M2C2V-j SPDT HA1B-A2C5-j HA1B-A2C1V-j DPDT HA1B-A2C6-j HA1B-A2C2V-j SPDT HA2B-M1C5-j HA2B-M1C1V-j DPDT HA2B-M1C6-j HA2B-M1C2V-j SPDT HA2B-A1C5-j HA2B-A1C1V-j DPDT HA2B-A1C6-j HA2B-A1C2V-j SPDT HA2B-M2C5-j HA2B-M2C1V-j DPDT HA2B-M2C6-j HA2B-M2C2V-j SPDT HA2B-A2C5-j HA2B-A2C1V-j DPDT HA2B-A2C6-j HA2B-A2C2V-j SPDT HA1B-M3C5-j HA1B-M3C1V-j DPDT HA1B-M3C6-j HA1B-M3C2V-j SPDT HA1B-A3C5-j HA1B-A3C1V-j DPDT HA1B-A3C6-j HA1B-A3C2V-j SPDT Switches & Pilot Devices o16mm - L6 Series Non-Illuminated Pushbuttons (Sub-Assembled) Operators Style + Operator + Button Buttons/Lenses Momentary Maintained Style Contacts Button LA1L-AO Square Terminal Style Lens Appearance Round LA1L-MO Complete Part AB6M-BK2-j AL6M-LK2-k AB6Q-BK2-j AL6Q-LK2-k Contacts Solder Tab PCB SPDT DPDT HA-C1 HA-C2 HA-C1V HA-C2V SPDT DPDT HA-C5 HA-C6 HA-C5V HA-C6V Display Lights Round = Gold Safety Lever Lock Silver + Switches & Pilot Lights Contact Square LA2L-MO LA2L-AO Rectangular Safety Lever Lock Appearance LA3L-MO LA3L-AO Relays & Sockets Rectangular AB6H-BK2-j Part Number AL6H-LK2-k HA9Z-LS Oversize Round Oversize Round Flush HA1B-MO HA1B-AO j Button Color Code HA1A-B1-j HA1A-L1-k* HA2B-MO HA2B-AO Oversize Round Extended HA1A-B2-j - Mushroom Code Black B Green G Red R Blue S White W Yellow Y Timers Oversize Square Color k Lens Color Code HA1B-A0L HA2A-B1-j 1. In place of j specify Button Color Code from table on right. 2. In place of k specify Lens Color Code from table on right. 3. *requires HA1L-M0 or HA1L-A0 operator instead of HA1B-M0 or HA1B-A0. 4. **requires HA2L-M0 or HA2L-A0 instead of HA2B-M0 or HA2B-A0. HA2A-L1-k** Oversize Square Extended - HA1A-B3-j HA1A-L3-k Code Amber A Green G Red R Blue S Yellow Y White W Circuit Breakers HA2A-B2-j Color Terminal Blocks HA1B-MOL Oversize Square Flush Mushroom USA: 800-262-IDEC Canada: 888-317-IDEC 473 Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Devices HA1B/HA1E Stop Switch Key features: PCB or Solder Terminals Locking Lever Removable Contact Blocks Positive Action Contacts 1 or 2 form B (SPST-NC) Contacts IP65 Protection 16mm Mounting Hole Tamper Proof Construction CSA File No. LR21451 File No. DK95-00138 UL Recognized File No. E55996 Specifications Nameplates PCB or Solder Terminal Contact Material Silver Applicable Standards EN60947-5-1, UL508, CSA 22.2. No. 14 Rated Insulation Voltage 250V AC/DC Degree of Protection IP65 Conditional Short-Circuit Current and Short-Circuit Protective Device 50 A (at 250V) 10A 250V Fuse, operation class M according to IEC269-1 and IEC269-2 Positive opening travel HAAV-Yellow Plastic o43mm 1 or 2 form B (SPST-NC) Termination 3.4mm 10.3 N (2 form B contacts) Maximum travel including travel beyond the minimum travel position 5.5mm Maximum frequency of actuation 1,200 operations/hour Pollution Degree Marking Part Number Blank HAAV-0 Timers Minimum force required to achieve positive opening operation of all break contacts. Relays & Sockets Contact Form Positive Opening Operation Direct Opening Action Signaling Lights * * * * * * * 3 Positive Action Stop Switch Style Accessories: Shroud Operation Pushlock/ Turn Reset Contact DPST(NC) (2 form B) Short Body SPST-NC (1 form B) DPST-NC (2 form B) Solder Tab PCB HA1B-V2E2R HA1BV2E2VR HA1E-V2S1R HA1E-V2S2R -- Style Part Number Applicable Standards XA9Z-KG1 SEMI S2 Compliant (Approved by TUV) Contactors Stop Switch Terminal Style 1. Button is non-removable, available in red and as complete assembled unit only. 2. Stop Switch does not come with safety lever lock. Buzzer Ratings Terminal Style Operating Voltage 6V AC/DC 10% 12V to 24 AC/DC 10% Solder/ Tab LA3Z-1X2 LA3Z-1X4 PCB LA3Z-1X2V LA3Z-1X4V 800-262-IDEC (4332) * USA & Canada Frequency 2 khz 500 HZ Amplitude 80db @ 0.1m (at rated voltage) Operating Voltage 6V AC/DC or 12 - 24V AC/DC 10% Adjustable Cycle 55 to 600 cycles per minute Current Draw DC: 7mA AC: 20mA Life 1000 hrs. minimum Insulation Voltage 60V AC/DC Operating Temperature -20 to 55C (no freezing), 45 to 85% RH Degree of Protection IP40 Circuit Breakers Buzzer-Rectangular Style Terminal Blocks Buzzers (IP40) 505 Switches & Pilot Devices o16mm - L6 Series Pilot Lights (Assembled) Switches & Pilot Lights Pilot Lights kLens/LED Color Codes Style Terminal Style Solder Tab PCB Round LA1P-1C0l-k LA1P-1C0lV-k Color Code Amber A Green G Red R Blue S White W Yellow Y Display Lights lVoltage/Lamp Code Square Voltage LA2P-1C0l-k LA2P-1C0lV-k Rectangular LA3P-1C0lV-k HA1P-1C0l-k HA1P-1C0lV-k HA2P-1C0l-k HA2P-1C0lV-k HA1P-1l-k -- 1 6V AC/DC LED 2 12V AC/DC LED 3 24V AC/DC LED 4 120V AC LED 8 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 24V AC/DC Incandescent 7 Relays & Sockets LA3P-1C0l-k Code 5V DC LED Oversize Round Timers Oversize Square Terminal Blocks Oversize Round Unibody Oversize Square Unibody -- USA: 800-262-IDEC Canada: 888-317-IDEC 475 Circuit Breakers HA2P-1l-k 1. In place of k specify Lens/LED Color Code from table. 2. In place of l specify Voltage Code from table. 3. Lamps also available in 5VDC, 6V AC/DC, 12V AC/DC or 120V AC, change "4" or "7" using Voltage/Lamp Codes (ie LA1P-1C03-k uses 12V AC/DC LED). 4. Light independent of switch position. Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Pilot Lights (Sub-Assembled) Terminals + Safety Lever Lock Operators + Lamp Holder + Lamp + Lenses Style Part Number Display Lights Round + Lens = Completed Unit Lamps Style Part Number Round Style LED AL6M-LK3-k LA1P-0 Voltage Part Number 5V DC 6V AC/DC 12V AC/DC 24V AC/DC 120 V AC LFTD-5k LFTD-6k LFTD-1k LFTD-2k LFTD-H2k 6V AC/DC 12V AC/DC 24V AC/DC LH-06 LH-14 LH-28 Incandescent Square Square Operator AL6Q-LK3-k Relays & Sockets LA2P-0 In place of k specify LED color code from table below. Rectangular Rectangular AL6H-LK3-k Terminals Appearance LA3P-0 Solder Tab PCB HA-C00 HA-C00V Oversize Round Oversize Round HA1A-P1-k HA1P-0 Not required for unibody operators. Timers Oversize Square Oversize Square HA2A-P1-k Lamp Holder Appearance Part Number HA2P-0 HA9Z-AH Terminal Blocks In place of k specify lens color code. Oversize Round Unibody Safety Lever Lock Appearance Part Number HA1P-00 HA9Z-LS Oversize Square Unibody k Lens/LED Color Codes Circuit Breakers HA2P-00 476 www.idec.com Color Code Amber A Green G Red R Blue S Yellow Y White W Switches & Pilot Devices o16mm - L6 Series Illuminated Pushbuttons (Assembled) Style Switches & Pilot Lights Illuminated Pushbuttons kLens Color Codes Operation Round Momentary Contact SPDT DPDT Terminal Style Solder Tab PCB LA1L-M1C5l-k LA1L-M1C6l-k LA1L-M1C1lV-k LA1L-M1C2lV-k SPDT DPDT LA1L-A1C5l-k LA1L-A1C6l-k LA1L-A1C1lV-k LA1L-A1C2lV-k Momentary SPDT DPDT LA2L-M1C5l-k LA2L-M1C6l-k LA2L-M1C1lV-k LA2L-M1C2lV-k Square Maintained Rectangular Momentary SPDT DPDT LA3L-M1C5l-k LA3L-M1C6l-k LA2L-A1C1lV-k LA2L-A1C2lV-k LA3L-M1C1lV-k LA3L-M1C2lV-k LA3L-A1C5l-k LA3L-A1C6l-k LA3L-A1C1lV-k LA3L-A1C2lV-k Momentary SPDT DPDT HA1L-M1C5l-k HA1L-M1C6l-k HA1L-M1C1lV-k HA1L-M1C2lV-k Maintained SPDT DPDT HA1L-A1C5l-k HA1L-A1C6l-k HA1L-A1C1lV-k HA1L-A1C2lV-k Momentary SPDT DPDT HA2L-M1C5l-k HA2L-M1C6l-k HA2L-M1C1lV-k HA2L-M1C2lV-k Maintained SPDT DPDT HA2L-A1C5l-k HA2L-A1C6l-k HA2L-A1C1lV-k HA2L-A1C2lV-k Momentary SPDT DPDT HA1L-M3C5l-k HA1L-M3C6l-k HA1L-M3C1lV-k HA1L-M3C2lV-k Maintained SPDT DPDT HA1L-A3C5l-k HA1L-A3C6l-k HA1L-A3C1lV-k HA1L-A3C2lV-k Oversize Round Oversize Square Mushroom G Red R Blue S Yellow Y White W lVoltage/Lamp Code Voltage Code 5V DC LED 1 6V AC/DC LED 2 12V AC/DC LED 3 24V AC/DC LED 4 120 V AC LED 8 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 24V AC/DC Incandescent 7 Terminal Blocks SPDT DPDT Green Timers Maintained A Relays & Sockets SPDT DPDT LA2L-A1C5l-k LA2L-A1C6l-k Code Display Lights Maintained Color Amber USA: 800-262-IDEC Canada: 888-317-IDEC 477 Circuit Breakers 1. In place of k specify Lens Color Code from table. 2. In place of l specify Voltage Code from table. 3. Lamps also available in 5V DC, 6V AC/DC, 12V AC/DC or 120V AC, change "4" or "7" using voltage/lamp codes (ie LA1P-1C03-k uses 12V AC/DC LED). 4. PCB terminal models also available with silver contacts change "1" or "2" to "5" or "6" respectively, (ie LA1L-M1C14V-j becomes LA1L-M1C54V-j). 5. Light independent of switch position. Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Illuminated Pushbuttons (Sub-Assembled) Terminals + Safety Lever Lock + Operators + Lamp + Lenses Style Display Lights Lamp Holder Momentary Maintained LA1L-MO + Lens = Completed Unit Lamps Style Part Number Style LED Round Round Operator LA1L-AO AL6M-LK2-k Voltage Part Number 5V DC 6V AC/DC 12V AC/DC 24V AC/DC 120 V AC LFTD-5k LFTD-6k LFTD-1k LFTD-2k LFTD-H2k 6V AC/DC 12V AC/DC 24V AC/DC LH-06 LH-14 LH-28 Incandescent Square Square LA2L-AO AL6Q-LK2-k Contacts LA3L-MO LA3L-AO Contacts Solder Tab PCB Gold Terminal Style Rectangular Rectangular SPDT DPDT HA-C10 HA-C20 HA-C10V HA-C20V Silver Relays & Sockets LA2L-MO Appearance SPDT DPDT HA-C50 HA-C60 HA-C50V HA-C60V AL6H-LK2-k Oversize Round Oversize Round Timers HA1L-MO HA1L-A0 HA1A-L1-k Lamp Holder Oversize Square HA2L-MO Terminal Blocks Appearance Oversize Square HA2L-AO Part Number HA9Z-AH HA2A-L1-k Safety Lever Lock Mushroom Mushroom HA1B-MOL Appearance HA1B-AOL HA1A-L3-k Circuit Breakers k Lens/LED Color Codes 478 Color Code Amber A Green G Red R Blue S Yellow Y White W In place of k specify lens color code. www.idec.com Part Number HA9Z-LS Switches & Pilot Devices o16mm - L6 Series Selector Switches (Assembled) Contact Operations Position 90 2 -Position Style Round Maintained Spring return from right Contact L L Terminal Style Solder Tab PCB R DPDT LA1S-2C6 LA1S-2C2V R DPDT LA1S-21C6 LA1S-21C2V L R DPDT LA1S-3C6 LA1S-3C2V Spring return from right L R DPDT LA1S-31C6 LA1S-31C2V Left 2-Way spring return L R DPDT LA1S-32C6 LA1S-32C2V R DPDT LA1S-33C6 LA1S-33C2V R DPDT LA2S-2C6 LA2S-2C2V Left C 45 3-Position C L Spring return from right L Maintained L Spring return from right L Spring return from left L 2-Way spring return R DPDT LA2S-21C6 LA2S-21C2V R DPDT LA2S-3C6 LA2S-3C2V R DPDT LA2S-31C6 LA2S-31C2V R DPDT LA2S-32C6 LA2S-32C2V L R DPDT LA2S-33C6 LA2S-33C2V L R DPDT LA3S-2C6 LA3S-2C2V Spring return from right L R DPDT LA3S-21C6 LA3S-21C2V Maintained L R DPDT LA3S-3C6 LA3S-3C2V Spring return from right L R DPDT LA3S-31C6 LA3S-31C2V Spring return from left L R DPDT LA3S-32C6 LA3S-32C2V 2-Way spring return L R DPDT LA3S-33C6 LA3S-33C2V L R DPDT HA1S-2C6 HA1S-2C2V Spring return from right L R DPDT HA1S-21C6 HA1S-21C2V Maintained L R DPDT HA1S-3C6 HA1S-3C2V Spring return from right L R DPDT HA1S-31C6 HA1S-31C2V Spring return from left L R DPDT HA1S-32C6 HA1S-32C2V 2-Way spring return L R DPDT HA1S-33C6 HA1S-33C2V C Left Right Contact Contact NO NC NO NC C 3-pos. (DPDT) Center C Left Right Contact Contact NO NC NO NC C Right C Left Right Contact Contact NO NC NO NC C C As viewed from front of switch. C Timers 90 2 -Position Left Right Contact Contact NO NC NO NC C C Rectangular C C L Maintained Left Right Contact Contact NO NC NO NC C 2-pos. (DPDT) Right Spring return from left Maintained Operator Position and Contact Operation Contacts Relays & Sockets 90 2 -Position Maintained (for all selectors) Display Lights 45 3-Position C Square Switches & Pilot Lights Selector Switches Maintained C Terminal Blocks C C C C USA: 800-262-IDEC Canada: 888-317-IDEC 1. All assembled selector switches use DPDT contacts. 2. For SPDT contacts see sub-components on next page. 3. PCB terminal models also available with silver contacts change "1" or "2" to "5" or "6" respectively, (ie LA1S-21C2V becomes LA1S-21C6V). Circuit Breakers 45 3-Position Oversize Round 90 2 -Position 45 3-Position C 479 Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator Operators Rectangular Part Number Maintained Spring from right LA1S-21Y 3 Maintained Spring from right Spring from left Spring from both LA1S-3Y LA1S-31Y LA1S-32Y LA1S-33Y 2 Maintained Spring from right LA2S-2Y LA2S-21Y 3 Maintained Spring from right Spring from left Spring from both LA2S-3Y LA2S-31Y LA2S-32Y LA2S-33Y 2 Maintained Spring from right LA3S-2Y LA3S-21Y 3 Maintained Spring from right Spring from left Spring from both LA3S-3Y LA3S-31Y LA3S-32Y LA3S-33Y 2 Maintained Spring from right HA1S-2Y HA1S-21Y 3 Maintained Spring from right Spring from left Spring from both HA1S-3Y HA1S-31Y HA1S-32Y HA1S-33Y Terminal Blocks Circuit Breakers 480 LA1S-2Y www.idec.com Terminal Style Contacts Solder Tab PCB Gold Function 2 Timers Oversize Round Position SPDT DPDT HA-C1 HA-C2 HA-C1V HA-C2V Silver Display Lights Relays & Sockets Square Complete Part Contacts Style Round = Appearance SPDT DPDT HA-C5 HA-C6 HA-C5V HA-C6V 1. All assembled switches listed on previous page use DPDT contacts. 2. SPDT Contacts for use on 2 position selector switch only Safety Lever Lock Appearance Part Number HA9Z-LS Switches & Pilot Devices o16mm - L6 Series Key Switches (Assembled) Contact Operations Position 90 2 -Position Style Round Maintained Spring return from right Contact L R L R Terminal Style Solder Tab PCB DPDT LA1K-2C6l LA1K-2C2Vl DPDT LA1K-21C6B LA1K-21C2VB L Spring return from right L DPDT LA1K-3C6l LA1K-3C2Vl R DPDT LA1K-31C6l LA1K-31C2Vl Left Right 2-Way spring return L R DPDT LA1K-32C6l LA1K-32C2Vl R DPDT LA1K-33C6D LA1K-33C2VD R DPDT LA2K-2C6l LA2K-2C2Vl Spring return from right L Maintained L Left R DPDT LA2K-21C6B LA2K-21C2VB R DPDT LA2K-3C6l LA2K-3C2Vl R DPDT LA2K-31C6l LA2K-31C2Vl R DPDT LA2K-32C6l LA2K-32C2Vl C 3-pos. (DPDT) Center 45 3-Position Spring return from left L 2-Way spring return L R DPDT LA2K-33C6D LA2K-33C2VD L R DPDT LA3K-2C6l LA3K-2C2Vl R DPDT LA3K-21C6B LA3K-21C2VB R DPDT LA3K-3C6l LA3K-3C2Vl 45 3-Position Spring return from left 90 2 -Position As viewed from front of switch. C L L C L R DPDT LA3K-31C6l R DPDT LA3K-32C6l Code A B Key retained in right position only C Key retained in left position only D Key retained in left and right (3 position only) E Key retained in center only (3 position only) G Key retained right and center (3 position only) H Key retained left and center (3 position only) LA3K-32C2Vl C L L Spring return from right L Maintained L Spring return from right L DPDT LA3K-33C6D LA3K-33C2VD DPDT HA1K-2C6l HA1K-2C2Vl R DPDT HA1K-21C6B HA1K-21C2VB R DPDT HA1K-3C6l HA1K-3C2Vl R DPDT HA1K-31C6l HA1K-31C2Vl R DPDT HA1K-32C6l HA1K-32C2Vl R DPDT HA1K-33C6D HA1K-33C2VD R R Description Key not retained in any position (removable in all positions) LA3K-31C2Vl C L l Key Retention Option Codes Key cannot be removed from a spring-return position. C C C Spring return from left L 2-Way spring return L C USA: 800-262-IDEC Canada: 888-317-IDEC 1. In place of l specify Key Retention Code from next page. 2. All assembled key switches have DPDT contacts. For SPDT see sub-assembled on next page. 3. PCB terminal models also available with silver contacts change "1" or "2" to "5" or "6" respectively, (ie LA1K-2C2Vl becomes LA1K-2C6Vl). Circuit Breakers 45 3-Position Oversize Round Maintained C Terminal Blocks 2-Way spring return C C C Spring return from right Left Right Contact Contact NO NC NO NC Timers 90 2 -Position L Maintained C C Spring return from right Spring return from right Right C Left Right Contact Contact NO NC NO NC C C Rectangular C Left Right Contact Contact NO NC NO NC C L C Left Right Contact Contact NO NC NO NC C C L Maintained Left Right Contact Contact NO NC NO NC C 2-pos. (DPDT) C Spring return from left Maintained R Operator Position and Contact Operation Contacts Relays & Sockets 90 2 -Position Maintained (for all selectors) Display Lights 45 3-Position C Square Switches & Pilot Lights Key Switches 481 Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator Relays & Sockets Complete Part Contacts Position Square Function Terminal Style Part Number 2 Maintained Spring from right LA1K-2l LA1K-21B 3 Maintained Spring from right Spring from left Spring from both LA1K-3l LA1K-31l LA1K-32l LA1K-33D 2 Maintained Spring from right LA2K-2l LA2K-21B 3 Maintained Spring from right Spring from left Spring from both LA2K-3l LA2K-31l LA2K-32l LA2K-33D Contacts Solder Tab PCB Gold Style Round SPDT DPDT HA-C1 HA-C2 HA-C1V HA-C2V Silver Display Lights Operators = Appearance SPDT DPDT HA-C5 HA-C6 HA-C5V HA-C6V 1. All assembled switches listed on previous page use DPDT contacts. 2. SPDT Contacts for use on 2 position selector switch only Safety Lever Lock Appearance Part Number HA9Z-LS Timers Rectangular 2 LA3K-2l LA3K-21B l Key Retention Option Codes Code 3 Terminal Blocks Maintained Spring from right Oversize Round 2 Circuit Breakers 3 Maintained Spring from right Spring from left Spring from both Maintained Spring from right Maintained Spring from right Spring from left Spring from both LA3K-3l LA3K-31l LA3K-32l LA3K-33D HA1K-2l HA1K-21B HA1K-3l HA1K-31l HA1K-32l HA1K-33D 1. In place of l specify key removable code from table on right. 2. Operator includes two keys. 482 www.idec.com Description A Key not retained in any position (removable in all positions) B Key retained in right position only C Key retained in left position only D Key retained in left and right (3 position only) E Key retained in center only (3 position only) G Key retained right and center (3 position only) H Key retained left and center (3 position only) Key cannot be removed from a spring-return position. Switches & Pilot Devices o16mm - L6 Series Illuminated Selector Switches (Assembled) Round Position 90 2 -Position Style Maintained Spring return from right Contact Terminal Style Solder Tab PCB L R DPDT LA1F-2C6l-k LA1F-2C2lV-k L R DPDT LA1F-21C6l-k LA1F-21C2lV-k 90 2 -Position Maintained L Spring return from right L DPDT LA1F-3C6l-k LA1F-3C2lV-k R DPDT LA1F-31C6l-k LA1F-31C2lV-k Operator Position and Contact Operation Contacts Left Right Contact Contact NO NC NO NC Left C 2-pos. (DPDT) C C L 2-Way spring return R DPDT LA1F-32C6l-k LA1F-32C2lV-k L R DPDT LA1F-33C6l-k LA1F-33C2lV-k L R DPDT LA2F-2C6l-k LA2F-2C2lV-k R DPDT LA2F-21C6l-k LA2F-21C2lV-k R DPDT LA2F-3C6l-k LA2F-3C2lV-k R DPDT LA2F-31C6l-k LA2F-31C2lV-k R DPDT LA2F-32C6l-k LA2F-32C2lV-k Left Maintained L Spring return from right L Spring return from left L 2-Way spring return L R DPDT LA2F-33C6l-k LA2F-33C2lV-k L R DPDT LA3F-2C6l-k LA3F-2C2lV-k Left Right Contact Contact NO NC NO NC 3-pos. (DPDT) Center C Left Right Contact Contact NO NC NO NC 45 3-Position 90 2 -Position Right C C As viewed from front of switch. C C L C DPDT LA3F-21C6l-k LA3F-21C2lV-k R DPDT LA3F-3C6l-k LA3F-3C2lV-k R DPDT LA3F-31C6l-k LA3F-31C2lV-k R k Lens/LED Color Codes Color Code Color Code Amber Green A Blue S G Yellow Y Red R White W Timers Spring return from right C C Relays & Sockets L C C Rectangular C Left Right Contact Contact NO NC NO NC C Spring return from right Maintained C Left Right Contact Contact NO NC NO NC Right C Spring return from left Maintained R (for all selectors) Display Lights 45 3-Position C Square Switches & Pilot Lights Contact Operations Illuminated Selector Switches C L Spring return from right L Spring return from left L 2-Way spring return L Maintained Spring return from right C C R DPDT LA3F-32C6l-k LA3F-32C2lV-k l Voltage/Lamp Code Voltage Code 5V DC LED 1 6V AC/DC LED 2 12V AC/DC LED 3 24V AC/DC LED 4 120V AC LED 8 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 24V AC/DC Incandescent 7 C R L R L DPDT DPDT LA3F-33C6l-k HA1F-2C6l-k LA3F-33C2lV-k HA1F-2C2lV-k R DPDT HA1F-21C6l-k HA1F-21C2lV-k R DPDT HA1F-3C6l-k HA1F-3C2lV-k R DPDT HA1F-31C6l-k HA1F-31C2lV-k R DPDT HA1F-32C6l-k HA1F-32C2lV-k R DPDT HA1F-33C6l-k HA1F-33C2lV-k Terminal Blocks C Maintained L Spring return from right L Spring return from left L 2-Way spring return L C C C USA: 800-262-IDEC Canada: 888-317-IDEC 1. In place of k specify Lens/LED Color Code from table above. 2. In place of l specify Voltage Code from table above. 3. Lamps also available in 5V DC, 6V AC/DC, 12 V AC/DC or 120V AC, change "4" or "7" using voltage/lamp codes (ie LA1F-2C63-k uses 12V AC/DC LED). 4. All switches listed have DPDT contacts. For SPDT see sub-assembled on next page. 5. PCB terminal models also available with silver contacts change "1" or "2" to "5" or "6" respectively, (ie LA1F-2C24V-k becomes LA1F-2C64V-k). 6. Light independent of switch position. 483 Circuit Breakers 45 3-Position Oversize Round 90 2 -Position 45 3-Position Maintained Switches & Pilot Devices o16mm - L6 Series Illuminated Selector Switches (Sub-Assembled) Switches & Pilot Lights Contacts + Safety Lever Lock + Lamp Holder + Lamp + Operators Display Lights + Lens/Handle = Completed Unit Safety Lever Lock Style Position Part Number 2 LA1F-20 LA1F-210 3 Maintained Spring from right Spring from left Spring from both LA1F-30 LA1F-310 LA1F-320 LA1F-330 2 Maintained Spring from right LA2F-20 LA2F-210 3 Maintained Spring from right Spring from left Spring from both LA2F-30 LA2F-310 LA2F-320 LA2F-330 2 Maintained Spring from right LA3F-20 LA3F-210 3 Maintained Spring from right Spring from left Spring from both LA3F-30 LA3F-310 LA3F-320 LA3F-330 2 Maintained Spring from right HA1F-20 HA1F-210 3 Maintained Spring from right Spring from left Spring from both HA1F-30 HA1F-310 HA1F-320 HA1F-330 Round Rectangular Timers Oversize Round Function Maintained Spring from right Square Relays & Sockets Operator Appearance Part Number HA9Z-LS Lamp Holder Appearance Part Number HA9Z-AH Lamps Style LED Voltage Part Number 5V DC 6V AC/DC 12V AC/DC 24V AC/DC 120V AC LFTD-5k LFTD-6k LFTD-1k LFTD-2k LFTD-H2k 6V AC/DC 12V AC/DC 24V AC/DC LH-06 LH-14 LH-28 Incandescent In place of k specify LED color code from table below. Contacts Contacts Terminal Blocks Gold Appearance SPDT DPDT Terminal Style Solder Tab HA-C10 HA-C20 PCB HA-C10V HA-C20V k Lens/LED Color Codes Lenses/Handles Color Code Appearance Amber A Green G Red R Blue S Part Number Standard Silver LA1A-F-k SPDT DPDT HA-C50 HA-C60 HA-C50V HA-C60V Oversize Circuit Breakers All assembled selectors on previous pages use DPDT contacts. SPDT contacts are for use only on two position selectors. HA1A-F-k In place of k specify lens color code from table. 484 www.idec.com Yellow Y White W Switches & Pilot Devices o16mm - L6 Series Pushbutton Selectors (Assembled) j Button Color Codes Terminal Style Style 2 Position 3 Position Color Code Color Code Solder Tab PCB Amber A Blue S HA1R-2C6-j HA1R-2C2V-j Green G Yellow Y Red R White W HA1R-3C6-j HA1R-3C2V-j 1. In place of j specify Button Color Code. 2. PCB terminal models also available with silver contacts (change "1" or "2" to "5" or "6" respectively, ie HA1R-2C2V-j becomes HA1R-2C6V-j). 3. Pushed position, momentary only. Contact Operation Contacts Operator Position and Contact Information 2 Position Left Center Normal Pushed Left Right Contact Contact NO NC NO NC Right Left Contact Contact NO NC NO NC C Left Right Contact Contact NO NC NO NC C C Normal Pushed Left Right Contact Contact NO NC NO NC Left Right Contact Contact NO NC NO NC -- 2-pos. (DPDT) C Left Right Contact Contact NO NC NO NC C Left Right Contact Contact NO NC NO NC C C 3-pos. (DPDT) Left Right Contact Contact NO NC NO NC Blocked C C Spring Return from Bottom C All models C C C Left Right Contact Contact NO NC NO NC C C C Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC C C C C Left Right Contact Contact NO NC NO NC C C Left Right Contact Contact NO NC NO NC C C Right Pushed -- C C Normal Maintained Spring from Top Up Left Right Contact Contact NO NC NO NC C C C C Relays & Sockets 3 Position 2-pos. (DPDT) Operator Position Center Left Right Contact Contact NO NC NO NC C As viewed from front of switch. C Lever Switches Style Operation Contacts Display Lights Down Contact Operation Style Switches & Pilot Lights Pushbutton Selectors Terminal Type Solder Tab PCB DPDT LA1T-2C6 LA1T-2C2V DPDT LA1T-21C6 LA1T-21C2V DPDT LA1T-22C6 LA1T-22C2V DPDT LA1T-3C6 LA1T-3C2V DPDT LA1T-31C6 LA1T-31C2V DPDT LA1T-32C6 LA1T-32C2V DPDT LA1T-33C6 LA1T-33C2V U Maintained Timers 2 -Position D U Spring return from top D U Spring return from bottom D U Maintained C Terminal Blocks D 3-Position U Spring return from top C D U Spring return from bottom C D U Spring return from both C D USA: 800-262-IDEC Canada: 888-317-IDEC Circuit Breakers 1. PCB terminal models also available with silver contacts (change "1" or "2" to "5" or "6" respectively, ie LA1T-2C2V becomes LA1T-2C6V). 2. Terminology: U = up, D = down, C = center. 485 Switches & Pilot Devices o16mm - L6 Series Display Lights Switches & Pilot Lights Switch Engraving Order Form - L6 Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To insure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: Relays & Sockets Rectangular Switch Round Switch Square Switch # of Lines Letter Height Max. Characters Per Line # of Lines Letter Height Max. Characters Per Line 1 5/32 6 1 5/32 5 Letter Height Max. Characters Per Line 5/32 3 1/8 3 1 5/32 6 2 3 5/32 5 1/8 6 2 Custom* 1/8 6 3 Custom* 4 N/A 2 1/8 6 1/8 6 4 N/A 3 4 N/A Timers *Engraving is possible, but character size will be smaller than standard sizes. 1. 2. 3. 4. Above mentioned specifications hold true for standard size pushbuttons (round, square and rectangular). Oversize pushbuttons and pilot lights allow you to engrave 1 additional character. Engraving is done on the button itself for non-iIlluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Sample Letter Sizes Enter text to be engraved: Terminal Blocks 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: Circuit Breakers # of Lines For IDEC Internal Use Only: Work Order #: 486 www.idec.com Switches & Pilot Devices o16mm - L6 Series Accessories Specifications Part Number Notes Made of metal MT-001 Used for tightening the plastic locking ring when installing the L6 series unit on a panel. Tightening torque should not exceed 9kgf cm when tightening the locking ring. Lamp Holder Tool (Made of Rubber) Made of rubber. Used for removing and replacing LED and incandescent lamps in illuminated units. OR-44 Rubber tool used for replacing LED and incandescent lamps. Lens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button from the housing. LED Lamp 5V DC 6V AC/DC 12V AC/DC 24V AC/DC 120V AC Incandescent Lamp 6V AC/DC 12V AC/DC 24V AC/DC Switch Guard Dust-proof Cover Terminal Cover 180 degrees opening, spring return LH-06 LH-14 LH-28 Round/Square AL-K6 Rectangular AL-KH6 Round/Square AL-K6SP Rectangular AL-KH6SP Oversize Round/Sq HA9Z-K1 For round units AL-D6 For square units AL-DQ6 For rectangular units AL-DH6 Made of white nylon All removable contacts H6-VL2 Unibody Pilot Lights H6-PVL Prevents inadvertent switch operation. IP40 dust-tight rated. Prevents inadvertent switch operation. IP65 oiltight rated. Provides extra level of sealing for "front-panel" portion of switches. (Not applicable for units with oversize lenses or buttons). Covers terminals to prevent possible electric shock. Aluminum AL-BM6 Fills unused panel cutouts. Made of aluminum. Screwon locking ring from inside of panel. IP65 (oiltight) rated. for LA1K, LA2K, LA3K (#132) AS6-SK for HA1K (#231) - oversize KG9Z-SK Replacement Keys Timers Fills unused panel cutouts. Made of nitrile rubber. Pushin installation from front of panel. IP65 (oiltight) rated. Mounting Hole Plug Pair of keys. All models Terminal Blocks Round Square Rectangle Oversize Round Oversize Square Mushroom Replacement Engraving Inserts AL6M-W AL6Q-W AL6H-W HA9Z-P1-W HA9Z-P2-W HA9Z-P13-W HA9Z-LN L6 standard AL6-LP L6 oversize HA9Z-LP Replacement Selector Inserts HA9Z-HC1-j Replacement Safety Lever Lock Prevents rotation of switches in panel. (included with all assembled switches) Applicable to round oversize selectors only j = (G, R, S, W, Y) HA9Z-LS USA: 800-262-IDEC Canada: 888-317-IDEC 487 Circuit Breakers Replacement Anti-Rotation Ring 0.5W, T 1-3/4 miniature flange base AL-B6 Rubber Replacement Locking Ring T 1-3/4 miniature flange base. In place of j specify LED Color Code (A, G, R, S, W, Y). Relays & Sockets 90 degrees opening maintained LFTD-5k LFTD-6k LFTD-1k LFTD-2k LFTD-H2k Display Lights Ring Wrench Switches & Pilot Lights Part Switches & Pilot Devices o16mm - L6 Series Switches & Pilot Lights Appearance Description Used With Part Number o24mm round, metal (aluminum color), panel cut-out o20.2mm Pushbuttons, pilot lights, illuminated pushbutton, selector switches, key selector switches and illuminated selector switches. LA9Z-SM61 o24mm round, plastic (black), panel cut-out o20.2mm LA9Z-S61B L6 Switch Flush Bezel + LA9Z-S71B Display Lights 024mm square, plastic (black), panel cut-out 020.2mm Flush Bezel 24 x 30mm rectangular, plastic (black), panel cut-out o20.2 x 26.2mm Switch Guard w/ Flush Bezel (spring return) = Rectangular, plastic (black) LA9Z-S81B LA9Z-KS8 Flush Switch Dimensions (mm) Pilot Lights (LA*P,) Pushbuttons (LA*B) Illuminated Pushbuttons (LA*L) 7.85 Panel Thickness 0.5 to 6 Gasket Locking Ring 6.4 6.8 1.45 1.45 Note: 1. Pushbuttons do not have lamp terminals. 2. Pilot lights have only lamp terminals. Anti-rotation Ring R15.5 0.6 Round Tab Terminal Width 2.8x0.5t PC Board Terminal Width 0.8x0.5t Square Rectangular NO C 5 6 5 6 NC X1 NC X2 NO X2 C o 1.2 o21 15.8 1 1 K C LO 2 17.8 1 2.6 5.5 PC Board Terminal 13.5 36 24 18 9 Solder/Tab Terminal Lever Switches (LA1T) Terminal Blocks 10.5 9 8 o1 Buzzer (LA3Z) PC Board Terminal 0.8Wx0.5t R15.5 2-R0.6 Tab Terminal 2.8Wx0.5t Panel Thickness 0.5 to 6 LO C K 8 2.7 18 X1 6 24 2 17.8 5.5 1.2 o21 X2 15.8 o1 10.8 6 Timers 5.7 LOCK T OP 6.8 Relays & Sockets Flush bezels not applicable for oversize units. 1 2.6 10.5 9 36 Emergency Stop Switch (HA1B) K " .61 ) RO m .5m (15 Circuit Breakers Rubber Washer LOC Panel Thickness 0.02"-0.24" (0.5~6.0mm) Stopper Locking Ring " 98 ) 0. m O .9m 4 (2 PCB Terminal 0.34" + (8.7mm) NC NC - 0.21" (5.4mm) o0.70" o0.83" (21mm) 488 (17.8mm) 0.20" 0.41" (5.2mm) (10.5mm) 0.62" (15.8mm) 1.42" (36mm) 0.53" (13.5mm) 0.43" (11mm) 0.98" (25mm) www.idec.com 24 13.5 9 Switches & Pilot Devices o16mm - L6 Series Emergency Stop Switch (HA1E) - Short Body Style Switches & Pilot Lights Selector Switches (LA*S,) Illuminated Selector Switches (LA*F,) Key Selector Switches (LA*K) Panel Thickness 0.5 to 6 6.4 Display Lights Gasket Locking Ring LOCK 1.45 6.8 T OP Anti-rotation Ring Round Tab Terminal Width 2.8x0.5t Square Rectangular o1 8 PC Board Terminal Width 0.8x0.5t LO R15.5 0.6 C 6 1.2 NO C 5 18 6 NC X1 X2 NO X2 C o21 5 2.6 1 10.5 9 5.5 PC Board Terminal 13.5 9 24 18 36 Relays & Sockets 15.8 NC 1 1 K 2 17.8 17 Solder/Tab Terminal Square Rectangular 18 o1 8 Round 9 24 18 26 Timers PC Board Drilling Layout (Bottom View) Panel Cut-Out o16.2 Illuminated Pushbuttons, Illuminated Selector Switches +0.2 0 6.4 Pilot Lights, Selector Switches, Key Selector Switches Pushbutton Lever Switches 7.85 6.8 6.8 1.45 5 5 5 24 5 5 5 1 1 1 1.45 Ho .2 Ho Ho o1 .2 24 le o1 o Terminal Blocks le le 2 1. HA1B E-Stop PCB Mounting Pattern 0.21" (5.3mm) 0.21" (5.3mm) USA: 800-262-IDEC Circuit Breakers O (1 0 .2 .0 m 5" m ) 0.34" 0.21" (5.4mm) (8.7mm) Canada: 888-317-IDEC 489 Switches & Pilot Devices o16mm - L6 Series NC NC X1 Switches & Pilot Lights Oversize Flush Pushbutton and Pilot Lights X2 NO NO X2 C C 1.02 [25.9] 0.94 [24.0] 0.43 [11.0] NO C NC NO C NC Display Lights Oversize Extended Non-Illuminated Pushbutton 0.59 [15.1] Relays & Sockets Oversize Unibody Pilot Lights 1.48 [37.5] C NC NO NO C NC Timers Mushroom Pushbuttons NC NC NO NO C Oversize Selector Switch C Terminal Blocks 1.18 [30.0] 0.79 [20.0] Circuit Breakers 0.94 [23.8 0.77 [19.5] 490 www.idec.com Switches & Pilot Devices o16mm - L6 Series NO NO C C NC Switches & Pilot Lights NC Oversize Key Switch 1.54 [39.0] NC NC NO C Display Lights NO Lever Switch 0.94 [23.8] Relays & Sockets Flush Bezel Flush Bezel with Switch Panel Thickness 0.5 to 5 14.8 8 o2 4 18 20 Selector Switches Illuminated & Non-illuminated Key 2 18.1 2 10 2 17 26 27.4 24 30 23 Lever 24 18 2 20 21.4 43 Timers 8.5 Rectangular 9 2 24 8.5 21.4 Square o1 o2 4 8 o1 0.9 0.8 9.8 Plastic Metal o 20 22.6 Round Flush Bezel Gasket o21.4 Mounting Bracket Terminal Blocks 9.3 2 Flush Bezel Mounting Hole Layout Square + - 0 0.2 .1 Round Rectangular 26.2 +0.2 - 0.1 24 min. 24 min. 24 min. 24 min. USA: 800-262-IDEC Circuit Breakers 24 min. +0.2 20.2 -0.1 o2 0. 2 20.2 +0.2 - 0.1 30 min. Canada: 888-317-IDEC 491 Switches & Pilot Devices Terminal Configurations Non Illuminated Pushbutton AL-K6SP Illuminated Pushbuttons Pilot Lights TOP Buzzer TOP X2 X1 Steady Slow Quick Input Terminal (X1) Buzzer Sound Switch C C X2 C X2 NC Input Terminal (X2) Lamp Terminal (-) X2 Lamp Terminal (-) NO NC X2 NO X1 Lamp Terminal (+) X1 NC NO Lamp Terminal (+) X2 NC NO X1 TOP C Switches & Pilot Lights o16mm - L6 Series AL-KH6SP 18 24 10.5 Panel Thickness 0.5 to 5 R2 13 23.5 13 45.5 minimum 33 2 45.5 minimum 23.5 10.5 Display Lights 34 14 H6-VL2 30 AL-B6 47 2 TOP o18 AL-DH6 24 6 o16.5 AL-DQ6 o24 17.6 AL-D6 19 minimum 24 Relays & Sockets 25 minimum 4 Timers AL-BM6 0.3 7.5 13 21 Waterproof gasket for dust cover Waterproof gasket for dust cover LFTD LED Lamp Internal Circuit 12 o17.8 2.5 7.5 13 Waterproof gasket for dust cover 0.3 0.3 13 7.5 15 Gasket Locking Ring Terminal Blocks Panel Thickness 0.5 to 6 LED Chip Protective Diode Zener Diode AL-B6 Circuit Breakers o18 6 o16.5 2 492 www.idec.com Switches & Pilot Devices o16mm - L6 Series General Instructions Switches & Pilot Lights Pushbutton Assembly Lamp Installation Lamps can be replaced in two ways: 1. If contacts are accessible (or pushbutton not installed in a panel) then it is easiest to first remove the contacts from the operator. This will allow easy access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and turn counter clockwise. Lamp can then be removed by pushing it back through the lamp holder. Display Lights 2. If contacts are not accessible, then the lamp can be replaced by first removing the lens from the operator. Just pull lens straight out either with a fingernail or optional lens removal tool (MT-101). Lamp/lamp-holder assembly can then be removed with lamp removal tool (OR-44). Insert lamp removal tool through operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder assembly out. Lamp can then be removed by pushing it back through the lamp holder. Engraving Lenses Fitting Grooves Grooves Relays & Sockets All buttons and lenses can be engraved directly on the outside surface. Illuminated lenses also allow for engraving on a plate that is underneath the colored section of the lens. Remove the colored section of the lens by pulling on the edge while simultaneously unhooking it from the latches on the lens holder. The marking plate will then be accessible. It can then be engraved or a thin marked insert (such as mylar or paper) can be sandwiched between the marking plate and colored section of the lens. Engraving Surface Color Lens Marking Plate Lens Holder Panel Mounting Timers Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by LOCK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator. PCB Mounting Terminal Blocks Being able to separate the contacts from the operator allows for assembly of the front panel components (operator and lens) to be performed in tandem with the PC board assembly and soldering. For applications where multiple rows of pushbuttons are mounted closely together, or where other components may obstruct access to the contact locking lever, be sure to include access holes in the PC board (refer to PC board layout dimensions for location). Also be sure to allow for space above and to the side of contact to ensure that no components block the contact block locking lever. PC board pins are designed to rest on the PCB, take this into consideration to ensure that pins do not short closely spaced traces. Circuit Breakers USA: 800-262-IDEC Canada: 888-317-IDEC 493