New 4.6" H disp G1F pag lay e 13 IDEC Touchscreen Family IDEC SmartTouch Family - Monitor your manufacturing line for increased produ IDEC Touchscreens - Smart Solutions to help control your bottom line In today's market, effective monitoring and control of your manufacturing environment is critical to your bottom line. In order to stay ahead of the competition, you need to constantly look for new ways to increase productivity and lower your costs, while maintaining quality control and safety. IDEC has focused on bringing smart solutions to the monitoring and control of the manufacturing environment. With the introduction of the touchscreen family of operator interfaces over 10 years ago, IDEC not only helps you control your manufacturing line, but also helps control your bottom line. A typical manufacturing control panel has an overwhelming array of buttons, switches, relays and other devices that make it cumbersome and hard to manage. Most control panels are large and bulky and take up a lot of very expensive real estate. With so many different components, rising replacement and labor costs continue to eat at your profit margin. Now with the introduction of our new IDEC SmartTouch family of operator interfaces, we bring you exceptional design, great functionality, and ease of programming that takes monitoring and control to the next level. 2 SmartTouch uctivity, quality control and safety IDEC SmartTouch Family: Smart design to fit your needs From the large 12.1" TFT LCD Screen, to the compact 4.6" STN LCD, IDEC touchscreens consistently produce sharp images with excellent visibility. Screens feature high pixel resolutions in monochrome or 256 colors and since space is often a rare commodity, their slim design can be adapted to fit applications where room is limited. With up to 8MB of memory and a 200MHz 32-bit RISC CPU, these superbright IDEC touchscreens put control, power and speed at your fingertips. Versatile, high functionality IDEC Touchscreens can function as a stand-alone controller or communicate with IDEC PLCs and a wide array of major manufacturers' PLCs. Touchscreens interface with any of your equipment to provide graphical data presentations in vivid color and to display bar graphs and meters to represent analog data. Illuminated pushbuttons can replace physical mechanical switches and pilot lamps can display on/off states and show almost any production information you need to monitor. 12.1" (HG4F) 10.4" (HG3F) Programming power made easy IDEC's powerful WindO/I-NV2 software lets you create colorful graphical interfaces for easier production supervision and control. A built-in library of over 5000 bitmap images helps you easily display almost every manufacturing activity you want to control. Our programming software is intuitive and user-friendly. With re-sizeable pop-up screens, Windows compatible fonts, and multilingual text capabilities, you enjoy the utmost flexibility in designing and programming. 5.7" (HG2F) 4.6" (HG1F) 3 Powerful features to increase your production efficiency Expansion I/O The IDEC SmartTouch Family is ideally matched to today's sophisticated technology. Using a wide range of graphic options, you can clearly represent specific equipment, make production information immediately apparent and instantly display safety problems. Consolidating controls on an IDEC touchscreen interface eliminates costly investments in wiring and installation of multiple pushbutton indicators on the traditional control panel. Just think how you can benefit with touchscreens at critical spots in your plant. An expansion digital I/O module gives you the option of expanding your system with 16 DC inputs and 16 transistor outputs for basic PLC control. Excluding 4.6" HG1F touchscreen. Increased functionality gives you the power of control Ethernet Support The built-in 10BaseT Ethernet port - found on the 10.4" and 12.1" touchscreens - allows communications with PLCs using NEW Allen Bradley Ethernet/IP, Modbus TCP/IP or IDEC 1:N protocol. The touchscreens can also remotely monitor machine-operating status via the Internet or your Local Area Network using any web browser. Regardless of your location, you can use your PC's browser (Netscape or Internet Explorer) to collect CF Card data about any touchscreen project. You can efficiently monitor and manage production activity from your office without the time or expense of travel. Remote Network Ethernet 4 Smart Functionality Basic Data Representation A built-in software library of over 5000 bitmap images lets you graphically represent almost any plant activity or equipment that you want to monitor or control. In addition to representing meters, bar graphs and switches, you can also incorporate keypads to facilitate changing values. Our user-friendly programming software lets you design each screen by simply selecting objects from a pull-down menu or from a row of object icons and dropping it onto the screen work area. All bitmap images are available in 256 colors and are easily re-configurable. Recipe, Alarm and Trend Logging The Recipe function allows you to conveniently set operational parameters, which can be individually defined for different processes. The Alarm function stores historical events with a date and time stamp and NEW enhanced features compliant to the ISA (Instrument Society of America) Standards, give additional options to display and manage alarm messages. Trend Logging expresses data in graphical form according to the time period you define. Using these functions, you can quickly view production information and collect and manage valuable data. Compact Flash Card IDEC Touchscreens support Compact Flash (CF) Cards with up to 512MB of memory. In addition to storing recipe, alarm and trending data, the CF Card can also store screen captures in a BMP format for documentation purposes. The CF Card can hold one or more projects and you can easily transfer a project directly to another touchscreen by simply inserting the card into the second touchscreen and downloading what you need. Excluding 4.6" HG1F touchscreen. New Password Protection Provides different levels of security and restrictions for multiple users on editing projects, or displaying screens and objects. Local Area Network 5 Smart design to keep you in control, and in communication Attention to detail in both function and form Black bezel models available upon request To meet your application needs, IDEC offers a 12.1" and 10.4" TFT LCD screen and 5.7" STN LCD screen with 256 color or monochrome and 16 shades of gray to provide you with either multicolored or gray scale graphics. All screens have high pixel resolution and super bright LCD screens with 350cd/m2 for the 12.1" and 10.4" screen and 250cd/m2 for the 5.7" screen to provide sharp quality images. With RS-232 / RS-485 / RS-422 communication, all IDEC Touchscreens communicate with IDEC, as well as other industry-leading PLC manufacturers. 6 Slim design for space savings Their slim body style - 50mm depth for the 5.7" HG2F, 49.6mm depth for the 10.4" HG3F, and 52.1mm depth for the 12.1" HG4F - provides a great advantage in space and cost saving in a panel. Smart Form Support of Leading Manufacturer's PLCs Printer Function IDEC Touchscreen's communications capabilities expand well beyond IDEC brand PLCs. Other major PLC manufacturers supported are: Allen Bradley, Mitsubishi, Omron, Automation Direct (Koyo), Keyence, GE, Modicon, Siemens, Sharp, Hitachi, Schneider, Yaskawa, Fanuc, Matsushita Electric Works (Aromat) and Yokogawa. The 10.4" and 12.1" IDEC Touchscreens can remotely communicate with multiple devices or PLCs over an Ethernet network, using the NEW Allen Bradley Ethernet/IP, Modbus TCP/IP, or IDEC 1:N drivers. Only one centrally located IDEC touchscreen is necessary to communicate with up to 16 PLCs that are located in different locations. The Ethernet/IP driver supports the following Allen Bradley Series PLCs: Micrologix, SLC500, PLC5 and ControlLogix. 1:N PLC Communication You can use this capability to print alarm data so a hard-copy record of specific events can be maintained. Copies of screens can also be printed when needed for documentation. Serial printers are supported on all IDEC Touchscreen displays. Parallel Printers supported on 10.4" and 12.1" models only. Barcode Reader Support This mode allows a single IDEC touchscreen to communicate with multiple PLCs. It is used when you need only one centrally located touchscreen to monitor and control PLCs in different locations. Depending on PLC type, a maximum of 31 PLCs can be connected to one touchscreen. PLC manufacturers supported for 1:N communication are: IDEC OpenNet Controller and MicroSmart, Automation Direct (Koyo): DirectLogic-DL205/405 and Modicon: Modbus RTU. O/I Link Communication IDEC Touchscreens provide a serial port that you can configure for use with special communication devices such as barcode readers. A barcode reader can send data directly to the touchscreen, where it can be used for quick viewing before being transferred to the PLC for further data manipulation. This link permits a single PLC to communicate with multiple IDEC touchscreens, where one touchscreen serves as the master and up to 15 as slaves. An O/I Link will accommodate communications over a maximum distance of 200 meters. The O/I Link should be used whenever you are using more than one touchscreen in a location to monitor and control a single PLC. Debugging Functions Pass Thru Function This function lets you download a PLC program from a PC through the touchscreen without interrupting operations. Only one cable is needed to program both units. The Pass Thru communications function is applicable to the following PLCs: IDEC Micro3, Micro3C, OpenNet Controller, MicroSmart and Mitsubishi MELSEC-FX, FX3UC and Q. Two modes are available for either monitoring data or troubleshooting. Once you download the project you created in WindO/I-NV2 to the touchscreen, you can use the Debugging Mode to communicate directly with the touchscreen and switch between screens, or view and modify batch data from the controls of your PC. In Simulation Mode, you can use simple On/Off control without connecting to the PLC. Approvals and International Ratings The IDEC Touchscreen family is UL listed for use in hazardous locations (Class I Div. 2). In addition, the 4.6" and 5.7" screens are IP65 and Nema 13 rated, while the 10.4" and 12.1" screens are IP66, Nema 4, 4X, 13 rated so they can be used in the most demanding industrial applications. 7 Easy programming: intuitive drag and drop functionality The WindO/I-NV2 software for all IDEC Touchscreens is the programming tool that lets you create colorful graphical interfaces to visualize operating conditions. The software is very intuitive with drag and drop functionality. The Help menus are a great source of information and a built-in library of bitmaps provides over 5000 images to help expand your creativity. The software also includes a debug function that allows you to go online and access the touchscreen for monitoring and changing data. Flexible Screen Display for Efficient Editing With WindO/I-NV2 software, screens can be easily arranged. A total of 3000 base screens can be created (as allowed by the memory size). Sub-screens known as pop-up menus can be resized, made (showing backgrounds) using the superimpose function, and can be made to appear anywhere around the base screen. Easy-to-manage Projects and Screens Screens and Project Settings List: * Screens can be duplicated and their properties can be changed easily. * Project settings can be edited. * Devices, text, and images can be imported or exported. Screen Preview List: * Screens can easily be selected using the preview image function. Object List: * Each object displays its properties such as the type of device used, conditions and operations. Buttons: * A button selected from an object list is shown on the editing screen. 8 Monitor every plant function with colorful graphical interfaces Wind0/I-NV2 Software Extensive Image Library Compatible with Standard Windows Fonts Fonts used in Windows can be used on the IDEC Touchscreens, making it possible to choose from a variety of text styles. Easy Programming of Operating Conditions A built-in symbol library provides over 5000 bitmaps to help you create cutting-edge graphical screens. Image data from BMP, JPG, DXF, WMF, and ICO files can also be imported. Operating conditions for objects such as switches, lamps, bit/word write, screen switching, and many more are easy to use. Step-by-step wizards guide the user through the set-up process. Script Function Users with basic programming knowledge in "C" can combine conditional statements, mathematical operations, and other functions to create simple and complex processes, greatly reducing the programming required in the PLC. A syntax check function is also available to provide easy program troubleshooting. Multilingual Capabilities for Global Applications The IDEC Touchscreen family can support other languages. With the text group function you can create a text database in different languages. Once the touchscreen is in a different country (e.g. China or Mexico) the customer can easily switch all text messages from English to Chinese or Spanish by a touch of a button. Applicable languages: Win2000 and XP make it possible to input Japanese, Simplified Chinese, Traditional Chinese, Korean languages, Western European languages (English, German, French, Italian, Spanish, Dutch, Norwegian, Danish, Finnish, Swedish, etc.), Central European languages (Czech, Polish, Hungarian, Romanian, Croatian, Slovene, and Slavic), Baltic languages, and Cyrillic languages (Russian, Ukranian, Bulgarian, Macedonian). 9 Large, high-resolution screens make your operations look better than ever Colorful graphical interfaces for most applications 12.1" 5.7" 10.4" 5.7" w/CC Click IDEC SmartTouch Part Numbers PART NUMBERS HG4F-JT22TFW HG4F-JT22TFB HG4F-JT22TFW-DH485-500 BEZEL COLOR Light Gray Black* Light Gray DESCRIPTION Color TFT LCD Touchscreen Color TFT LCD Touchscreen Color TFT LCD Touchscreen with DF1 / DH485 converter/cable package for SLC 500 (w/RJ45 connector) 10.4" HG3F-FT22TFW HG3F-FT22TFB HG3F-FT22TFW-DH485-500 Light Gray Black* Light Gray Color TFT LCD Touchscreen Color TFT LCD Touchscreen Color TFT LCD Touchscreen with DF1/DH485 converter/cable package for SLC 500 (w/RJ45 connector) 5.7" HG2F-SS22VCF HG2F-SB22VCF HG2F-SS22VCF-DH485-500 Light Gray Light Gray Light Gray HG2F-SB22VCF-DH485-500 Light Gray Color STN LCD Touchscreen Monochrome STN LCD Touchscreen Color STN LCD Display with DF1 / DH485 converter/ cable package for SLC500 ( w/RJ45 connector ) Monochrome STN Color Display with DF1 / DH485 converter / cable package for SLC500 (w/RJ45 connector) HG2F-SS52VCF HG2F-SB52VCF Light Gray Light Gray 12.1" 5.7" w/ CC Click Color STN LCD Touchscreen w/ CC Click Tactile Touchbutton Technology Monochrome STN LCD Touchscreen w/ CC Click Tactile Touchbutton Technology * Black Bezel Models available upon request. Please consult IDEC. 10 IDEC SmartTouch Displays IDEC SmartTouch Functionality Table LCD Display Type 256 Color Screen Models Monochrome Models Memory Resolution (Pixels) Printer Support RS-232 / RS-485 / RS-422 Compact Flash Slot Ethernet O/I Link 1:N PLC Communication Digital I/O Touch Regions 5.7" STN Yes Yes 2 MB 320x240 Serial Yes Yes - Yes Yes Yes 192 5.7" w/ CC Click STN Yes Yes 2 MB 320x160** Serial Yes Yes - Yes Yes Yes 128 10.4" TFT Yes - 8 MB* 640x480 Serial / Parallel Yes Yes Yes Yes Yes Yes 768 IDEC Touchscreen Accessories 12.1" TFT Yes - 8 MB* 800x600 Serial / Parallel Yes Yes Yes Yes Yes Yes 1200 *2Mb used for OS **4 tactile pushregions (40X70 pixels) PART NUMBERS ACCESSORIES DESCRIPTION Programming Tools WindO/I-NV2 Programming software for all IDEC Touchscreen Series Cable connecting PC to Touchscreen via RS-232 Serial Port HG9Y-ZSS2W HG9Z-XCM1A Converters USB to RS-232 Convertor for PCs without Serial Ports AB SLC500 (w/RJ45 connector) DF1 / DH485 Communication Package FC4A-USB HG9Z-GWDF1DH485-2 Protective Sheet For 12.1" HG4F (2 pcs. / pack) For 10.4" HG3F (2 pcs. / pack) For 5.7"HG2F (5 pcs. / pack) HG9Z-4DAPN02 HG9Z-3DAPN02 HG9Z-2D2 Mounting Clips For 10.4" HG3F & 12.1" HG4F (10 pcs. / pack) For 5.7" HG2F (4 pcs. / pack) HG9Z-4K1PN10 HG9Z-2K1PN04 Replacement Backlight For 12.1" HG4F For 10.4" HG3F For 5.7" HG2F For 12.1" HG4F / 10.4" HG3F / 5.7" HG2F HG9Z-4FB HG9Z-3FB HG9Z-2B1 HG9Z-2G1 32 Point Digital I/O For 10.4" HG3F & 12.1" HG4F (16 Inputs & 16 Outputs) For 5.7" HG2F (16 Inputs & 16 Outputs) HG9Z-3P102 HG9Z-2P101 Compact Flash Card 32MB CF Card for 5.7" HG2F, 10.4" HG3F, 12.1" HG4F HG9Z-MF32 IDEC PLC Communnication Cable MicroSmart (FC4A) RS232 MicroSmart (FC4A) RS485 with mini DIN connection (-PC2/-HPC2) MicroSmart (FC4A) RS485 with screw terminal connection (-PC3/-HPC3) FC4A-KC2CA HG9Z-3C115A HG9Z-2C145A O/I Link Unit 11 Touchscreen Driver Table Enjoy Touchscreen control even in limited space applications IDEC SmartTouch Communication Driver List [Short Form] For Complete List of Cables and Driver Configurations, please go to www.idec.com/usa/smarttouch. MANUFACTURER IDEC Allen Bradley Automation Direct (Koyo) Siemens Schneider (Telemecanique, Square D) SERIES FA-3S, FA-2J Micro3, Micro3C OpenNet MicroSmart Web Server Unit PLC-5 SLC-5/03, SLC-5/04 SLC-5/05 MicroLogix ControlLogix DL405 DL205 (05/06) S7-200 S7-300 S7-400 Twido Momentum Others Aromat FP Omron SYSMAC-C Keyence GE Fanuc CS1 KV Series KV-700 VersaMax Nano/Micro Series 90-30 APPLICABLE CPU PF3S-CP12/CP13 PF3S-CP11/CP11T, PF2J FC2A FC3A FC4A/FC5A FC3A/FC4A/FC5A 1785 1747-L53, 1747-L54 1747-L551,1747-L552, 1747-L553 1747-L551 1000, 1200, 1500 5550, 5555 D4-430, D4-440 (D2-240 (D2-230/250/260) CPU 212, 214, 215, 216, 221, 222, 224, 226, 226XM CPU 313, 314, 315, 315-2DP, 316, 318 CPU 412, 414, 416, 416F-2, 417 TWDLCAA16DRF, TWDLCAA24DRF (10, 20, 40 CPUs) 171CC96020 Any PLCs that support MODBUS/TCP protocol FP0 FP1 FP Sigma FP10, FP10SH FP2, FP2SH CP1, CPM1A CPM2A C500, C500F, C1000H, C2000, C2000H C1000HF C200HS C200HE, C200HG, C200HX C120, C120F CQM1H, C200HS-CPU21/23/31/33 C200HE-CPU42, C200HG-CPU43/63, C200HX-CPU44/64 CS1G, CS1H KV 10, 16, 24, 40, 80 KV-700 10 I/Os, 14 I/Os 23 I/Os, 28 I/Os CPU 311, 313, 323, 331, 341, 350, 351, 352, 360, 363, 364, 374 CPU 331, 341, 350, 351, 352, 360, 363, 364, 374 HOST INTERFACE DRIVER FA-3S (CP12/13) FA-3S (CP11/11T, FA2J) MICRO3, MICRO3C OpenNet/MicroSmart OpenNet/MicroSmart Web Server Unit PLC-5 (Half-Duplex) or *Ethernet/IP MicroLogix/SLC500 (Full Duplex) MicroLogix/SLC500 (Full Duplex) *Ethernet/IP MicroLogix/SLC500 (Full Duplex) or *Ethernet/IP *Ethernet/IP DirectLogic-DL205/405 S7-200 (PPI) S7-300 3964(R)/RK512 Modbus-RTU MODBUS/TCP MEWNET SYSMAC C Series SYSMAC CS1 Series KV/KZ KV-700 Series 90 (SNP-X) *Only for HG3F and HG4F 12 Compact Touchscreen Display HG1F - Big screen features on a small screen Fast response, bright displays and clear instructions to operators are hallmarks of a smart HMI--one that surpasses every button and every old panel. The HG1F includes a high-speed CPU processor that responds to commands and changes displays almost instantaneously. Plus it's easy to read, even from an angle, and you can set contrasts to create the ideal display for any lighting condition. The higher-resolution screen gives you more real estate than other small screens, so you can take as much space as you need to make the elements and text on your screen as understandable as possible. This compact screen has it all, including: * Large memory capacity of 1MB * High resolution: 300 X 100 pixels * Supports major brand PLC manufacturers * Approvals: UL, c-UL, Hazardous Locations Class 1 Div. 2, NEMA Type 13, IP65, CE * High performance CPU for fast response * Super bright monochrome LCD screen: 500 cd/m2 * Analog resistive touch panel * Screen orientation: landscape or portrait 4.6" HG1F Touchscreen Part Numbers DESCRIPTION 4.6" Monochrome LCD Screen, Light Gray Bezel 4.6" Monochrome LCD Screen, Black Bezel 4.6" Monochrome LCD Screen, Light Gray Bezel 4.6" Monochrome LCD Screen, Black Bezel COMMUNICATION TYPE RS-232 RS-232 RS-485/RS-422 RS-485/RS-422 PART NUMBER HG1F-SB22BF-W HG1F-SB22BF-B HG1F-SB22YF-W HG1F-SB22YF-B SOFTWARE NAME WindO/I-NV2 PART NUMBER HG9Y-ZSS2W Portrait Orientation Software DESCRIPTION Programming software for all Touchscreens. Software includes PLC Drivers for: IDEC, Allen Bradley-DF1, Omron, Mitsubishi, Modicon, Aromat, Siemens, Koyo (Automation Direct), Keyence, Toshiba, and many more. Landscape Orientation Programming Cable: Connects HG1F to PC DESCRIPTION RS-232 programming cable* PART NUMBER HG9Z-XCM1A (Cable FC2A-KC4C can also be used) 35.3mm *if computer only has USB, an additional cable (FC4A-USB) must be used. Cable Part Numbers: Connects HG1F to PLC* IDEC PLC Model MicroSmart (FC5A & FC4A) MicroSmart (FC5A & FC4A) MicroSmart (FC5A & FC4A) MicroSmart (FC5A & FC4A) OpenNet or Micro3C OpenNet or Micro3C Micro3 COMMUNICATION TYPE RS-232 (FC4A-PC1 or FC4A-HPC1) RS-232 Built-in Port (8pin Mini-Din) RS-485 (FC4A-PC3 or FC4A-HPC3) RS-485 (FC4A-PC2 or FC4A-HPC2) RS-232 Built-in Port (8pin Mini-Din) RS-485 Built-in Port (Screw terminal type) RS-485 Built-in Port (8 pin Mini-Din) PART NUMBER HG9Z-XC183** FC4A-KC1CA HG9Z-1C131A HG9Z-1C121A HG9Z-XC183 HG9Z-1C131A HG9Z-1C121A Side View *Other cables for supported PLCs available. For more information, visit www.idec.com/usa/hg1f **Cable FC4A-KC1CA can also be used 13 Text message screens fit your special communications needs HG1X Text display for small applications The HG1X series are text message displays with built-in user definable function keys, which make them an excellent tool for small applications. The bright, back-lit LCD screens can display data, alarms, errors and data entry. The user can define as many screens as allowed by the memory and create multiple alarms with basic acknowledgements. In addition, they can communicate with IDEC PLCs, as well as many major brand PLCs. * Models available: 2-line, 16 character display with 24KB memory 4-line, 20 character display with 24KB memory 8-line, 20 character display with 64KB memory * All keys are programmable to do multiple tasks * Screen Password protection * LEDs are programmable for On/Off state * Serial port for printing screens and alarms * Numeric keypad for easy data entry (4 and 8-line displays only) * Bitmap import capability (8-line displays only) * Communication available for most major PLC manufacturers * Class 1 Div 2 (UL 1604) for hazardous locations, UL508 * All models are programmable with WINDMSG software Screens Users can easily define as many screens as allowed by the memory. A list of tasks can be assigned for each screen. All screens can be password protected providing an increased level of security. Various types of objects can be placed on the screens such as text, data display, alarm object, data entry, bar graphs, and a user can even import images (8 line display model only). 2 Line Display Keys The keys are user definable. Each key can have multiple tasks assigned to it, making them extremely powerful tools for simple machine control. Create simple alarms with keys assigned to acknowledge alarms and print or view next/previous alarms. LED The LEDs provide on/off status for users to provide for simple monitoring. 4 Line Display Changing Data Cursor control (for 2-line display) or keypad (for 4-line and 8-line display) operations are available for easy data entry. Serial Port Supports serial printing to print screens. Great for keeping records or for documentation purposes. 8 Line Display Cost effective displays for small applications. HG1X Part Numbers DESCRIPTION COMMUNICATION TYPE PART NUMBERS 2-Line Text Message Display, No External Power Required RS-232 HG1X-252 2-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-222 4-Line Text Message Display, No External Power Required RS-232 HG1X-452 4-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-422 8-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-822 14 Character Displays HG1X Software: User-friendly WINDMSG software programs all text message displays. It has drop down menus and icons for convenient function selection. Objects are easily configured using step-by-step navigation. PLC drivers are built into the software, which allows for extended communication with IDEC and many other popular PLC manufacturers. Software DESCRIPTION Programming software for all HG1X Series PLC Drivers are included with the software: SOFTWARE NAME WINDMSG PART NUMBER WINDMSG Programming Cable DESCRIPTION Programming cable for HG1X Series (PC TO HG1X) PART NUMBER HG9Z-PC125A Cable Part Numbers: Connect between HG1X-252 / 452 to PLC MANUFACTURER ALLEN BRADLEY MODEL Micrologix Series COMMUNICATION TYPE RS-232 PART NUMBERS HG9Z-SCI007 AROMAT FP0/FPM RS-232 HG9Z-SCI015 IDEC Micro 3 Micro 3C MicroSmart OpenNet RS-232 RS-232 RS-232 RS-232 HG9Z-SCI25A (built-in converter) HG9Z-SCI25B HG9Z-SCI25B HG9Z-SCI25B Automation Direct (KOYO) DL 205 Series RS-232 HG9Z-SCI023 MITSUBISHI FX0 RS-232 HG9Z-SCI008 (built-in converter) SIEMENS S7-200 RS-232 HG9Z-SCI029 Cable Partnumbers: Connect between HG1X-222 / 422 / 822 and PLC MANUFACTURER MODEL COMMUNICATION TYPE PART NUMBERS ALLEN BRADLEY Micrologix series RS-232 HG9Z-SCI100 SLC 500 series RS-232 HG9Z-SCI120 AROMAT FP0/FPM RS-232 HG9Z-SCI500 IDEC Micro 3 Micro 3C MicroSmart OpenNet RS-485 RS-232 RS-232 RS-232 HG9Z-SCI220 HG9Z-SCI200 HG9Z-SCI200 HG9Z-SCI200 Automation Direct (KOYO) DL 205 Series RS-232 HG9Z-SCI400 MITSUBISHI FX0 RS-232 HG9Z-SCI600 SIEMENS S7-200 RS-485 HG9Z-SCI300 *For Complete List of Cables and Driver Configurations, please go to www.idec.com/usa/smarttouch. 15 IDEC Money-Saving Solution Package Today's industrial machines require controls that are simple, versatile and user-friendly. With that in mind, IDEC is offering a solution package that can solve all your control problems. Save up to 50 percent on specially-packaged IDEC components that combine everything you need to install a graphical operator interface. This package includes an IDEC Touchscreen and drivers, user-friendly software for easy programming, a Slim-Line Power Supply and MicroSmart PLC or IDEC SmartRelay. IDEC components in each package work together to give you a simple solution at a great price. For more information, visit www.idec.com/usa/smarttouch. More Drivers and Ethernet Connectivity If you want an efficient way to monitor and control your industrial applications, then look no further than IDEC 10.4" and 12.1" TFT LCD touchscreens. Competitively priced and bundled with countless features and functions, these touchscreens even have the flexibility to communicate with other brand PLCs. In fact, in addition to Web Server functionality, the available network drivers for these touchscreens support AB Ethernet/IP, Modbus TCP/IP or IDEC. This enables you to remotely control, monitor and manage data over an Ethernet network from the convenience of your office. Built-in drivers can support over 100 different types of controllers. Major drivers supported are: l l l l l l l l l l l 12.1" l l l IDEC Microsmart, ONC, FA series IDEC Webserver Module *NEW* Allen Bradley Ethernet/IP *NEW* Allen Bradley (DF1) Automation Direct Omron Mitsubishi Modicon Modbus TCP/IP *NEW* GE Fanuc Siemens Aromat Keyence Yaskawa Support Information IDEC SmartTouch Family: www.idec.com/usa/smarttouch Software demos and upgrades: www.idec.com/software Technical support: support@idec.com 800-262-IDEC www.idec.com Contact IDEC for complete listing 10.4" www.idec.com USA Japan Germany China/Beijing China/Shenzhen IDEC Corporation Tel (408) 747-0550 opencontact@idec.com IDEC Corporation Tel +81-6-6398-2571 products@idec.co.jp IDEC Elektrotechnik GmbH Tel: +49-40-253054-0 service@idec.de IDEC (Shanghai) Corporation Tel +86-10-6581-6131 idec@cn.idec.com IDEC (Shenzhen) Corproation Tel: +86-755-8356-2977 Canada United Kingdom Hong Kong China/Shanghai Singapore IDEC Canada Ltd. Tel (905) 890-8561 sales@ca.idec.com IDEC Electronics Ltd. Tel +44 (0) 1256-321000 sales@uk.idec.com IDEC (H.K.) Co., Ltd. Tel +852-2803-8989 info@hk.idec.com IDEC IZUMI (Shanghai) Co., Ltd. Tel: +86-21-5353-1000 idec@cn.idec.com IDEC Asia Pte. Ltd. Tel +65-6746-1155 info@sg.idec.com Australia IDEC Australia Pty. Ltd. Tel +61-3-9763-3244 sales@au.idec.com Taiwan www.idec.com (c)2007 IDEC Corporation. All Rights Reserved Catalog No. HG9Y-B100-2 01/07 15K Specifications and other descriptions in this catalog are subject to change without notice. IDEC Taiwan Corporation Tel: +886-2-2698-3929 service@idectwn.com.tw