HG9Y-ZSS2W - IDEC - Datasheet.Live

IDEC Touchscreen Family

New

4.6” HG1F

display

page 13

IDEC Touchscreens –

Smart Solutions to help

control your bottom line

IDEC SmartTouch Family - Monitor your manufacturing line for increased productivity

In today’s market, effective monitoring

and control of your manufacturing

environment is critical to your bottom

line. In order to stay ahead of the

competition,you needtoconstantly look

for new ways to increase productivity

and lower your costs, while maintaining

quality control and safety.

A typical manufacturing control panel

has an overwhelming array of buttons,

switches, relays and other devices

that make it cumbersome and hard to

manage. Most control panels are large

and bulky and take up a lot of very

expensive real estate. With so many

different components, rising replace-

ment and labor costs continue to eat

at your profit margin.

IDEC has focused on bringing smart

solutions to the monitoring andcontrol

of the manufacturing environment.

With theintroductionofthetouchscreen

family of operator interfaces over 10

years ago, IDEC not only helps you

control your manufacturing line, but also

helps control your bottom line.

Now with the introduction of our new

IDEC SmartTouch family of operator

interfaces, we bring you exceptional

design, great functionality, and ease

of programming that takes monitoring

and control to the next level.

IDEC SmartTouch

Family:

Smart design to fit your needs

From the large 12.1” TFT LCD Screen, to the

compact 4.6” STN LCD, IDEC touchscreens

consistently produce sharp images with

excellent visibility. Screens feature high pixel

resolutions in monochrome or 256 colors and

since space is often a rare commodity, their

slim design can be adapted to fit applications

where room is limited. With up to 8MB of

memory and a 200MHz 32-bit RISC CPU, these

superbright IDEC touchscreens put control,

power and speed at your fingertips.

Versatile, high functionality

IDEC Touchscreens can function as a

stand-alone controller or communicate

with IDEC PLCs and a wide array of major

manufacturers’ PLCs. Touchscreens interface

with any of your equipment to provide

graphical data presentations in vivid color and

to display bar graphs and meters to represent

analog data. Illuminated pushbuttons can

replace physical mechanical switches and pilot

lamps can display on/off states and show

almost any production information you

need to monitor.

Programming power made easy

IDEC’s powerful WindO/I-NV2 software

lets you create colorful graphical interfaces

for easier production supervision and control.

A built-in library of over 5000 bitmap images

helps you easily display almost every

manufacturing activity you want to control.

Our programming software is intuitive and

user-friendly. With re-sizeable pop-up screens,

Windows compatible fonts, and multilingual

text capabilities, you enjoy the utmost

flexibility in designing and programming.

10.4” (HG3F)

oductivity, quality control and safety

SmartTouch

5.7” (HG2F)

12.1” (HG4F)

4.6” (HG1F)

Ethernet Support

The built-in 10BaseT Ethernet port - found on the 10.4” and 12.1” touchscreens - allows

communications with PLCs using NEW Allen Bradley Ethernet/IP, Modbus TCP/IP or IDEC

1:N protocol. The touchscreens can also remotely monitor machine-operating status via the

Internet or your Local Area Network using any web browser. Regardless of your location, you

can use yo ur P C’s browser (Netscape or Internet Explorer) to collect CF Card data about any

touchscreen project.You can efficiently monitor and manage production activity from your

office without the time or expense of travel.

Increased functionality

gives you the power

of control

Powerful features to increase your production efficiency

Ethernet

The IDEC SmartTouch Family is

ideally matched to today’s sophisticated

technology. Using a wide range of graphic

options, you can clearly represent specific

equipment, make production information

immediately apparent and instantly

display safety problems. Consolidating

controlsonan IDECtouchscreen interface

eliminates costly investments in wiring

and installation of multiple pushbutton

indicators on the traditional control panel.

Just think how you can benefit with

touchscreens at critical spots in your plant.

Remote Network

Expansion I/O

An expansion digital I/O module gives you the

option of expanding your system with 16 DC inputs

and 16 transistor outputs for basic PLC control.

Excluding 4.6” HG1F touchscreen.

Compact Flash Card

IDEC Touchscreens support Compact Flash (CF)

Cards with up to 512MB of memory. In addition to

storing recipe, alarm and trending data, the CF Card

can also store screen captures in a BMP format for

documentation purposes. The CF Card can hold one

or more projects and you can easily transfer a

project directly to another touchscreen by simply

inserting the card into the second touchscreen

and downloading what you need. Excluding 4.6”

HG1F touchscreen.

Recipe, Alarm and Trend Logging

The Recipe function allows you to conveniently set

operational parameters, which can be individually

defined for different processes. The Alarm function

stores historicalevents with adate and t ime sta m p

and NEW enhanced features compliant to the ISA

(Instrument Society of America) Standards, give

additional options to display and manage alarm

messages. Trend Logging expresses data in graphical

form according to the time period you define. Using

these functions, you can quickly view prod u c ti o n

information and collect and manage valuable data.

Basic Data Representation

A built-in software library of over 5000 bitmap images lets you graphically represent almost any plant

activity or equipment that you want to monitor or control. In addition to representing meters, bar graphs and

switches, you can also incorporate keypads to facilitate changing values. Our user-friendly programming

software lets you design each screen by simply selecting objects from a pull-down menu or from a row of

object icons and dropping it onto the screen work area. All bitmap images are available in 256 colors and

are easily re-configurable.

Smart Functionality

Local Area Network

New Password Protection

Provides different levels of security and restrictions

for multiple users on editing projects, or displaying

screens and objects.

Attention to

detail in both

function and form

Smart design to keep you in control, and in communication

Their slim body style – 50mm depth for the 5.7”

HG2F, 49.6mm depth for the 10.4” HG3F, and

52.1mm depth for the 12.1” HG4F – provides a

great advantage in space and cost saving in a

panel.

To meet your application needs, IDEC offers a 12.1” and 10.4” TFT LCD screen and 5.7” STN LCD screen

with 256 color or monochrome and 16 shades of gray to provide you with either multicolored or gray scale

graphics. All screens have high pixel resolution and super bright LCD screens with 350cd/m2for the 12.1”

and 10.4” screen and 250cd/m2for the 5.7” screen to provide sharp quality images. With RS-232 / RS-485

/ RS-422 communication, all IDEC Touchscreens communicate with IDEC, as well as other industry-leading

PLC manufacturers.

Slim design for

space savings

Black bezel models available upon request

O/I Link Communication

This link permits a single PLC to communicate with multiple IDEC touchscreens, where one touchscreen

serves as the master and up to 15 as slaves. An O/I Link will accommodate communications over a

maximum distance of 200 meters. The O/I Link should be used whenever you are using more than one

touchscreen in a location to monitor and control a single PLC.

Support of Leading Manufacturer’s PLCs

IDEC Touchscreen’s communications capabilities expand well beyond IDEC brand PLCs. Other major

PLC manufacturers supported are: Allen Bradley, Mitsubishi, Omron, Automation Direct (Koyo),

Keyence, GE, Modicon, Siemens, Sharp, Hitachi, Schneider, Yaskawa, Fanuc, Matsushita Electric

Works (Aromat) and Yokogawa.

The 10.4” and 12.1” IDEC Touchscreens can remotely communicate with multiple devices or PLCs over

an Ethernet network, using the NEW Allen Bradley Ethernet/IP, Modbus TCP/IP, or IDEC 1:N drivers.

Only one centrally located IDEC touchscreen is necessary to communicate with up to 16 PLCs that are

located in different locations. The Ethernet/IP driver supports the following Allen Bradley Series PLCs:

Micrologix, SLC500, PLC5 and ControlLogix.

1:N PLC Communication

This mode allows a single IDEC touchscreen to communicate with multiple PLCs. It is used when you

need only one centrally located touchscreen to monitor and control PLCs in different locations.

Depending on PLC type, a maximum of 31 PLCs can be connected to one touchscreen. PLC manufactur-

ers supported for 1:N communication are: IDEC OpenNet Controller and MicroSmart, Automation

Direct (Koyo): DirectLogic-DL205/405 and Modicon: Modbus RTU.

Pass Thru Function

This function lets you download a PLC program from a PC through thetouchscreen without interrupting

operations. Only one cable is needed to program both units. The Pass Thru communications function is

applicable to the following PLCs: IDEC Micro3, Micro3C, OpenNet Controller, MicroSmart and

Mitsubishi MELSEC-FX, FX3UC and Q.

Barcode Reader Support

IDEC Touchscreens provide a serial port that you

can configure for use with special communication

devices such as barcode readers. A barcode reader

can send data directly to the touchscreen, where

it can be used for quick viewing before being

transferred to the PLC for further data manipulation.

Printer Function

You can use this capability to print alarm data

so a hard-copy record of specific events can be

maintained. Copies of screens can also be printed

when needed for documentation.

Serial printers are supported on all IDEC

Touchscreen displays. Parallel Printers supported

on 10.4” and 12.1” models only.

Debugging Functions

Two modes are available for either monitoring

data or troubleshooting. Once you download the

project you created in WindO/I-NV2 to the

touchscreen, you can use the Debugging Mode to

communicate directly with the touchscreen and

switch between screens, or view and modify batch

data from the controls of your PC. In Simulation

Mode, you can use simple On/Off control

without connecting to the PLC.

Smart Form

Approvals and International Ratings

The IDEC Touchscreen family is UL listed for use in hazardous locations (Class I Div. 2).

In addition, the 4.6” and 5.7” screens are IP65 and Nema 13 rated, while the 10.4” and 12.1” screens

are IP66, Nema 4, 4X, 13 rated so they can be used in the most demanding industrial applications.

Easy-to-manage Projects

and Screens

Screens and Project Settings List:

• Screens can be duplicated and their properties

can be changed easily.

• Project settings can be edited.

• Devices, text, and images can be imported

or exported.

Screen Preview List:

• Screens can easily be selected using the

preview image function.

Object List:

• Each object displays its properties such as the

type of device used, conditions and operations.

Buttons:

• A button selected from an object list is shown on

the editing screen.

Flexible Screen Display

for Efficient Editing

With WindO/I-NV2 software, screens can be

easily arranged. A total of 3000 base screens

can be created (as allowed by the memory size).

Sub-screens known as pop-up menus can be

resized, made (showing backgrounds) using the

superimposefunction, and can be made toappear

anywhere around the base screen.

Easy programming: intuitive drag and drop functionality

Monitor every plant function with

colorful graphical interfaces

The WindO/I-NV2 software for all

IDEC Touchscreens is the programming

tool that lets you create colorful graphical

interfaces to visualize operating conditions.

The software is very intuitive with drag

and drop functionality. The Help menus

are a great source of information and a

built-in library of bitmaps provides over

5000 images to help expand your creativity.

The software also includes a debug function

that allows you to go online and access

the touchscreen for monitoring and

changing data.

Compatible with Standard

Windows Fonts

Fonts used in Windows can be used on the IDEC

Touchscreens, making it possible to choose from a

variety of text styles.

Easy Programming

of Operating Conditions

Operating conditions for objects such as switches,

lamps, bit/word write, screen switching, and many

more are easy to use. Step-by-step wizards guide

the user through the set-up process.

Multilingual Capabilities for

Global Applications

The IDEC Touchscreen family can support other

languages. With the text group function you can

create a text database in different languages.

Once the touchscreen is in a different country (e.g.

China or Mexico) the customer can easily switch

all text messages from English toChinese or

Spanish by a touch of a button.

Script Function

Users with basic programming knowledge in

“C” can combine conditional statements,

mathematical operations, and other functions

to create simple and complex processes, greatly

reducing the programming required in the PLC.

A syntax check function is also available to

provide easy program troubleshooting.

Wind0/I-NV2 Software

Extensive Image Library

A built-in symbol library provides over 5000 bitmaps

to help you create cutting-edge graphical screens.

Image data from BMP, JPG, DXF, WMF, and ICO

files can also be imported.

Applicable languages:

Win2000 and XP make it possible to input Japanese, Simplified Chinese, Traditional Chinese,

Korean languages, Western European languages (English, German, French, Italian, Spanish,

Dutch, Norwegian, Danish, Finnish, Swedish, etc.), Central European languages (Czech, Polish,

Hungarian, Romanian, Croatian, Slovene, and Slavic), Baltic languages, and Cyrillic languages

(Russian, Ukranian, Bulgarian, Macedonian).

Large, high-resolution screens make your operations look better than ever

Colorful graphical interfaces

for most applications

IDEC SmartTouch Part Numbers

PART NUMBERS BEZEL COLOR DESCRIPTION

12.1" HG4F-JT22TFW Light Gray Color TFT LCD Touchscreen

HG4F-JT22TFB Black* Color TFT LCD Touchscreen

HG4F-JT22TFW-DH485-500 Light Gray Color TFT LCD Touchscreen with DF1 / DH485 converter/cable

package for SLC 500 (w/RJ45 connector)

10.4" HG3F-FT22TFW Light Gray Color TFT LCD Touchscreen

HG3F-FT22TFB Black* Color TFT LCD Touchscreen

HG3F-FT22TFW-DH485-500 Light Gray Color TFT LCD Touchscreen with DF1/DH485 converter/cable

package for SLC 500 (w/RJ45 connector)

5.7" HG2F-SS22VCF Light Gray Color STN LCD Touchscreen

HG2F-SB22VCF Light Gray Monochrome STN LCD Touchscreen

HG2F-SS22VCF-DH485-500 Light Gray Color STN LCD Display with DF1 / DH485 converter/ cable package

for SLC500 ( w/RJ45 connector )

HG2F-SB22VCF-DH485-500 Light Gray Monochrome STN Color Display with DF1 / DH485 converter / cable

package for SLC500 (w/RJ45 connector)

5.7" HG2F-SS52VCF Light Gray Color STN LCD Touchscreen w/ CC Click Tactile Touchbutton Technology

w/ CC Click HG2F-SB52VCF Light Gray Monochrome STN LCD Touchscreen w/ CC Click Tactile Touchbutton Technology

* Black Bezel Models available upon request. Please consult IDEC.

12.1"

10.4”

5.7”

5.7” w/CC Click

IDEC SmartTouch Displays

*2Mb used for OS

**4 tactile pushregions (40X70 pixels)

IDEC SmartTouch Functionality Table

5.7” 5.7” w/ CC Click 10.4” 12.1”

LCD Display Type STN STN TFT TFT

256 Color Screen Models Yes Yes Yes Yes

Monochrome Models Yes Yes – –

Memory 2 MB 2 MB 8 MB* 8 MB*

Resolution (Pixels) 320x240 320x160** 640x480 800x600

Printer Support Serial Serial Serial / Parallel Serial / Parallel

RS-232 / RS-485 / RS-422 Yes Yes Yes Yes

Compact Flash Slot Yes Yes Yes Yes

Ethernet – – Yes Yes

O/I Link Yes Yes Yes Yes

1:N PLC Communication Yes Yes Yes Yes

Digital I/O Yes Yes Yes Yes

Touch Regions 192 128 768 1200

IDEC Touchscreen Accessories

PART NUMBERS ACCESSORIES DESCRIPTION

Programming Tools WindO/I-NV2 Programming software for all IDEC Touchscreen Series HG9Y-ZSS2W

Cable connecting PC to Touchscreen via RS-232 Serial Port HG9Z-XCM1A

Converters USB to RS-232 Convertor for PCs without Serial Ports FC4A-USB

AB SLC500 (w/RJ45 connector) DF1 / DH485 Communication Package HG9Z-GWDF1DH485-2

Protective Sheet For 12.1” HG4F (2 pcs. / pack) HG9Z-4DAPN02

For 10.4” HG3F (2 pcs. / pack) HG9Z-3DAPN02

For 5.7”HG2F (5 pcs. / pack) HG9Z-2D2

Mounting Clips For 10.4” HG3F & 12.1” HG4F (10 pcs. / pack) HG9Z-4K1PN10

For 5.7” HG2F (4 pcs. / pack) HG9Z-2K1PN04

Replacement Backlight For 12.1” HG4F HG9Z-4FB

For 10.4” HG3F HG9Z-3FB

For 5.7” HG2F HG9Z-2B1

O/I Link Unit For 12.1” HG4F / 10.4” HG3F / 5.7” HG2F HG9Z-2G1

32 Point Digital I/O For 10.4” HG3F & 12.1” HG4F (16 Inputs & 16 Outputs) HG9Z-3P102

For 5.7” HG2F (16 Inputs & 16 Outputs) HG9Z-2P101

Compact Flash Card 32MB CF Card for 5.7” HG2F, 10.4” HG3F, 12.1” HG4F HG9Z-MF32

IDEC PLC Communnication Cable MicroSmart (FC4A) RS232 FC4A-KC2CA

MicroSmart (FC4A) RS485 with mini DIN connection (-PC2/-HPC2) HG9Z-3C115A

MicroSmart (FC4A) RS485 with screw terminal connection (-PC3/-HPC3) HG9Z-2C145A

IDEC SmartTouch Communication Driver List [Short Form]

MANUFACTURER SERIES APPLICABLE CPU HOST INTERFACE DRIVER

IDEC FA-3S, FA-2J PF3S-CP12/CP13 FA-3S (CP12/13)

PF3S-CP11/CP11T, PF2J FA-3S (CP11/11T, FA2J)

Micro3, Micro3C FC2A MICRO3, MICRO3C

OpenNet FC3A OpenNet/MicroSmart

MicroSmart FC4A/FC5A OpenNet/MicroSmart

Web Server Unit FC3A/FC4A/FC5A Web Server Unit

Allen Bradley PLC-5 1785 PLC-5 (Half-Duplex) or *Ethernet/IP

SLC-5/03, SLC-5/04 1747-L53, 1747-L54 MicroLogix/SLC500 (Full Duplex)

SLC-5/05 1747-L551,1747-L552, 1747-L553 MicroLogix/SLC500 (Full Duplex)

1747-L551 *Ethernet/IP

MicroLogix 1000, 1200, 1500 MicroLogix/SLC500 (Full Duplex) or *Ethernet/IP

ControlLogix 5550, 5555 *Ethernet/IP

Automation Direct DL405 D4-430, D4-440 DirectLogic-DL205/405

(Koyo) DL205 (05/06) (D2-240 (D2-230/250/260)

Siemens S7-200 CPU 212, 214, 215, 216, 221, 222, 224, S7-200 (PPI)

226, 226XM

S7-300 CPU 313, 314, 315, 315-2DP, 316, 318 S7-300 3964(R)/RK512

S7-400 CPU 412, 414, 416, 416F-2, 417

Schneider Twido TWDLCAA16DRF, TWDLCAA24DRF Modbus-RTU

(Telemecanique, Square D) (10, 20, 40 CPUs)

Momentum 171CC96020 MODBUS/TCP

Others Any PLCs that support

MODBUS/TCP protocol

Aromat FP FP0 MEWNET

FP1

FP Sigma

FP10, FP10SH

FP2, FP2SH

Omron SYSMAC-C CP1, CPM1A SYSMAC C Series

CPM2A

C500, C500F, C1000H, C2000, C2000H

C1000HF

C200HS

C200HE, C200HG, C200HX

C120, C120F

CQM1H, C200HS-CPU21/23/31/33

C200HE-CPU42, C200HG-CPU43/63,

C200HX-CPU44/64

CS1 CS1G, CS1H SYSMAC CS1 Series

Keyence KV Series KV 10, 16, 24, 40, 80 KV/KZ

KV-700 KV-700 KV-700

GE Fanuc VersaMax Nano/Micro 10 I/Os, 14 I/Os Series 90 (SNP-X)

23 I/Os, 28 I/Os

Series 90-30 CPU 311, 313, 323, 331, 341, 350,

351, 352, 360, 363, 364, 374

CPU 331, 341, 350, 351, 352,

360, 363, 364, 374 *Only for HG3F and HG4F

For Complete List of Cables and Driver Configurations, please go to www.idec.com/usa/smarttouch.

Touchscreen Driver Table

Enjoy Touchscreen control even in limited space applications

HG1F - Big screen features on a small screen

Fast response, bright displays and clear instructions to operators are hallmarks of a smart

HMI—one that surpasses every button and every old panel. The HG1F includes a high-speed CPU

processor that responds to commands and changes displays almost instantaneously. Plus it’s easy

to read, even from an angle, and you can set contrasts to create the ideal display for any lighting

condition. The higher-resolution screen gives you more real estate than other small screens, so you

can take as much space as you need to make the elements and text on your screen as understand-

able as possible. This compact screen has it all, including:

• High performance CPU for fast response

• Super bright monochrome LCD screen:

500 cd/m2

• Analog resistive touch panel

• Screen orientation: landscape or portrait

• Large memory capacity of 1MB

• High resolution: 300 X 100 pixels

• Supports major brand PLC manufacturers

• Approvals: UL, c-UL, Hazardous Locations

Class 1 Div. 2, NEMA Type 13, IP65, CE

Compact Touchscreen Display

4.6” HG1F Touchscreen Part Numbers

DESCRIPTION COMMUNICATION TYPE PART NUMBER

4.6" Monochrome LCD Screen, Light Gray Bezel RS-232 HG1F-SB22BF-W

4.6" Monochrome LCD Screen, Black Bezel RS-232 HG1F-SB22BF-B

4.6” Monochrome LCD Screen, Light Gray Bezel RS-485/RS-422 HG1F-SB22YF-W

4.6” Monochrome LCD Screen, Black Bezel RS-485/RS-422 HG1F-SB22YF-B

Software

DESCRIPTION SOFTWARE NAME PART NUMBER

Programming software for all Touchscreens. WindO/I-NV2 HG9Y-ZSS2W

Software includes PLC Drivers for:

IDEC, Allen Bradley-DF1, Omron, Mitsubishi,

Modicon, Aromat, Siemens, Koyo (Automation

Direct), Keyence, Toshiba, and many more.

Programming Cable: Connects HG1F to PC

DESCRIPTION PART NUMBER

RS-232 programming cable* HG9Z-XCM1A (Cable FC2A-KC4C can also be used)

*if computer only has USB, an additional cable (FC4A-USB) must be used.

Cable Part Numbers: Connects HG1F to PLC*

IDEC PLC Model COMMUNICATION TYPE PART NUMBER

MicroSmart (FC5A & FC4A) RS-232 (FC4A-PC1 or FC4A-HPC1) HG9Z-XC183**

MicroSmart (FC5A & FC4A) RS-232 Built-in Port (8pin Mini-Din) FC4A-KC1CA

MicroSmart (FC5A & FC4A) RS-485 (FC4A-PC3 or FC4A-HPC3) HG9Z-1C131A

MicroSmart (FC5A & FC4A) RS-485 (FC4A-PC2 or FC4A-HPC2) HG9Z-1C121A

OpenNet or Micro3C RS-232 Built-in Port (8pin Mini-Din) HG9Z-XC183

OpenNet or Micro3C RS-485 Built-in Port (Screw terminal type) HG9Z-1C131A

Micro3 RS-485 Built-in Port (8 pin Mini-Din) HG9Z-1C121A

Portrait Orientation

Landscape Orientation

Side View

35.3mm

*Other cables for supported PLCs available. For more information, visit www.idec.com/usa/hg1f **Cable FC4A-KC1CA can also be used

HG1X

Text display for small applications

The HG1X series are text message displays with

built-in user definable function keys, which make

them an excellent tool for small applications. The

bright, back-lit LCD screens can display data,

alarms, errors and data entry. The user can define

as many screens as allowed by the memory and

create multiple alarms with basic acknowledge-

ments. In addition, they can communicate with

IDEC PLCs, as well as many major brand PLCs.

• Models available:

2-line, 16 character display with 24KB memory

4-line, 20 character display with 24KB memory

8-line, 20 character display with 64KB memory

• All keys are programmable to do multiple tasks

• Screen Password protection

• LEDs are programmable for On/Off state

• Serial port for printing screens and alarms

•Numeric keypad for easy data entry (4 and 8-line

displays only)

• Bitmap import capability (8-line displays only)

• Communication available for most major PLC

manufacturers

• Class 1 Div 2 (UL 1604) for hazardous locations,

UL508

• All models are programmable with WINDMSG

software

Cost effective displays

for small applications.

Text message screensfit your special communications needs

Screens

Users can easily define as many screens as allowed

by the memory. A list of tasks can be assigned for

each screen. All screens can be password protected

providing an increased level of security. Various

types of objects can be placed on the screens such

as text, data display, alarm object, data entry, bar

graphs, and a user can even import images

(8 line display model only).

Keys

The keys are user definable. Each key can

have multiple tasks assigned to it, making them

extremely powerful tools for simple machine

control. Create simple alarms with keys assigned

to acknowledge alarms and print or view

next/previous alarms.

LED

The LEDs provide on/off status for users to provide

for simple monitoring.

Changing Data

Cursor control (for 2-line display) or keypad

(for 4-line and 8-line display) operations are available

for easy data entry.

Serial Port

Supports serial printing to print screens. Great for

keeping records or for documentation purposes.

HG1X Part Numbers

DESCRIPTION COMMUNICATION TYPE PART NUMBERS

2-Line Text Message Display, No External Power Required RS-232 HG1X-252

2-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-222

4-Line Text Message Display, No External Power Required RS-232 HG1X-452

4-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-422

8-Line Text Message Display, 24VDC Power Required RS-232 / RS-485 HG1X-822

2 Line Display

4 Line Display

8 Line Display

HG1X Software:

User-friendly WINDMSG software programs

all text message displays. It has drop down

menus and icons for convenient function

selection. Objects are easily configured using

step-by-step navigation. PLC drivers are built

into the software, which allows for extended

communication with IDEC and many other

popular PLC manufacturers.

Software

DESCRIPTION SOFTWARE NAME PART NUMBER

Programming software for all HG1X Series WINDMSG WINDMSG

PLC Drivers are included with the software:

Programming Cable

DESCRIPTION PART NUMBER

Programming cable for HG1X Series (PC TO HG1X) HG9Z-PC125A

Cable Part Numbers: Connect between HG1X-252 / 452 to PLC

MANUFACTURER MODEL COMMUNICATION TYPE PART NUMBERS

ALLEN BRADLEY Micrologix Series RS-232 HG9Z-SCI007

AROMAT FP0/FPM RS-232 HG9Z-SCI015

IDEC Micro 3 RS-232 HG9Z-SCI25A (built-in converter)

Micro 3C RS-232 HG9Z-SCI25B

MicroSmart RS-232 HG9Z-SCI25B

OpenNet RS-232 HG9Z-SCI25B

Automation Direct (KOYO) DL 205 Series RS-232 HG9Z-SCI023

MITSUBISHI FX0 RS-232 HG9Z-SCI008 (built-in converter)

SIEMENS S7-200 RS-232 HG9Z-SCI029

Cable Partnumbers: Connect between HG1X-222 / 422 / 822 and PLC

MANUFACTURER MODEL COMMUNICATION TYPE PART NUMBERS

ALLEN BRADLEY Micrologix series RS-232 HG9Z-SCI100

SLC 500 series RS-232 HG9Z-SCI120

AROMAT FP0/FPM RS-232 HG9Z-SCI500

IDEC Micro 3 RS-485 HG9Z-SCI220

Micro 3C RS-232 HG9Z-SCI200

MicroSmart RS-232 HG9Z-SCI200

OpenNet RS-232 HG9Z-SCI200

Automation Direct (KOYO) DL 205 Series RS-232 HG9Z-SCI400

MITSUBISHI FX0 RS-232 HG9Z-SCI600

SIEMENS S7-200 RS-485 HG9Z-SCI300

*For Complete List of Cables and Driver Configurations, please go to www.idec.com/usa/smarttouch.

Character Displays

USA

IDEC Corporation

Tel (408) 747-0550

opencontact@idec.com

Canada

IDEC Canada Ltd.

Tel (905) 890-8561

sales@ca.idec.com

Australia

IDEC Australia Pty. Ltd.

Tel +61-3-9763-3244

sales@au.idec.com

Japan

IDEC Corporation

Tel +81-6-6398-2571

products@idec.co.jp

United Kingdom

IDEC Electronics Ltd.

Tel +44 (0) 1256-321000

sales@uk.idec.com

Germany

IDEC Elektrotechnik GmbH

Tel: +49-40-253054-0

service@idec.de

Hong Kong

IDEC (H.K.) Co., Ltd.

Tel +852-2803-8989

info@hk.idec.com

www.idec.com

China/Beijing

IDEC (Shanghai) Corporation

Tel +86-10-6581-6131

idec@cn.idec.com

China/Shanghai

IDEC IZUMI (Shanghai) Co., Ltd.

Tel: +86-21-5353-1000

idec@cn.idec.com

China/Shenzhen

IDEC (Shenzhen) Corproation

Tel: +86-755-8356-2977

Singapore

IDEC Asia Pte. Ltd.

Tel +65-6746-1155

info@sg.idec.com

Taiwan

IDEC Taiwan Corporation

Tel: +886-2-2698-3929

service@idectwn.com.tw

Support Information

IDEC SmartTouch Family:

www.idec.com/usa/smarttouch

Software demos and upgrades:

www.idec.com/software

Technical support:

support@idec.com

800-262-IDEC

www.idec.com

More Drivers and Ethernet Connectivity

If you want an efficient way to monitor and control your industrial applications, then look no further than

IDEC 10.4” and 12.1” TFT LCD touchscreens. Competitively priced and bundled with countless features and

functions, these touchscreens even have the flexibility to communicate with other brand PLCs. In fact, in

addition to Web Server functionality, the available network drivers for these touchscreens support AB

Ethernet/IP, Modbus TCP/IP or IDEC. This enables you to remotely control, monitor and manage data over

an Ethernet network from the convenience of your office. Built-in drivers can support over 100 different

types of controllers. Major drivers supported are:

lIDEC Microsmart, ONC, FA series

lIDEC Webserver Module *NEW*

lAllen Bradley Ethernet/IP *NEW*

lAllen Bradley (DF1)

lAutomation Direct

lOmron

lMitsubishi

lModicon

lModbus TCP/IP *NEW*

l GE Fanuc

lSiemens

lAromat

lKeyence

lYaskawa

Contact IDEC for complete listing

Specifications and other descriptions in this catalog are subject to change without notice.

www.idec.com

Catalog No. HG9Y-B100-2 01/07 15K

12.1"

10.4”

IDEC Money-Saving Solution Package

Today’s industrial machines require controls that are simple, versatile and

user-friendly. With that in mind, IDEC is offering a solution package that can

solve all your control problems. Save up to 50 percent on specially-packaged

IDEC components that combine everything you need to install a graphical

operator interface. This package includes an IDEC Touchscreen and drivers,

user-friendly software for easy programming, a Slim-Line Power Supply and

MicroSmart PLC or IDEC SmartRelay. IDEC components in each package work

together to give you a simple solution at a great price. For more information,

visit www.idec.com/usa/smarttouch.