E3C E3C Special-Purpose Photoelectric Sensors E3C Miniature Sensors with Separate Amplifiers Fit Tight Spaces Fast, 1 ms response time Light incident indicator on sensor Dust-resistant flat lens surface New, thin side view model Prewired sensors have 2 m (6.56 ft) cable Amplifier with built-in ON-, OFF- and oneshot delays available New prewired DC amplifier designed for track mounting has alarm output to signal unstable sensing conditions Ordering Information SENSORS Through-beam Type Shape Sensing distance 10 cm (3.94 in) Part number E3C-S10 20 cm (7.87 in E3C-S20W 30 cm (11.81 in) E3C-S30W E3C-S30T 50 cm (19.69 in) E3C-S50 1 m (3.28 ft) E3C-1 2 m (6.56 ft) E3C-2 Diffuse Reflective Type Shape Sensing distance Part number 5 cm (1.97 in) E3C-DS5W 10 cm (3.94 in) E3C-DS10 AMPLIFIERS Shape Fits 1/16 DIN panel cutout Supply voltage Output 100 to 240 VAC, 50/60 Hz Relay and NPN solid-state Timer functions -- Mounting style ON-delay OFF-delay One-shot Socket (included) Part number E3C-A E3C-C For S3D8 controller 12 to 24 VDC NPN and PNP solid-state -- Track E3C-WH4F 2 Miniature NPN solid-state -- PNP solid-state Socket Track (order separately) E3C-GE4 E3C-GF4 Slim, prewired NPN PNP 40 ms OFF-delay E3C-JC4P E3C-JB4P E3C E3C ACCESSORIES Description Mounting brackets Sockets required for E3C-G4 amplifier Mounting track Part number OAC-T1 OAC-T2 OAC-T3 E39-L42 E39-L31 PYF08M PYF08A-E PFP-50N PFP-100N PFP-M PFP-S U-shaped, for E3C-S10, with 10 mm (0.394 in) sensing distance gap U-shaped, for E3C-S10, with 20 mm (0.787 in) sensing distance gap U-shaped, for E3C-S10, with 30 mm (1.181 in) sensing distance gap L-shaped, for E3C-DS10 L-shaped, for E3C-S50 Bottom surface mount socket Combination bottom surface and track-mount socket DIN rail, 50 cm (1.64 ft) length DIN rail, 1 m (3.28 ft) length End plate Spacer REPLACEMENT PARTS Description Track-mount socket for E3C-A and E3C-C amplifiers Mounting bracket for E3C-1 Mounting bracket for E3C-2 Mounting bracket for E3C-J4P Part number PF113A-E E39-L41 E39-L42 E39-L48 TYPICAL APPLICATIONS Detect parts coming from a bowl feeder in a space-confined location Space-saving flat sensors can detect small parts in tight spaces E3C-S20W E3C-S50 3 E3C E3C Specifications THROUGH-BEAM TYPE Part number Sensing distance Light source Detectable Type object Size E3C-S10 E3C-S20W E3C-S30 E3C-S50 E3C-1 10 cm (3.94 in) 20 cm (7.87 in) 50 cm (1.64 ft) 1 m (3.28 ft) Pulse modulated infrared LED Opaque materials 2 mm (0.08 in) 2 mm (0.09 in) 3 mm (1.18 in) 4 mm (0.16 in) min. dimension min. dimension min. dimension min. dimension Required amplifier E3C-A, E3C-C, E3C-GE4, E3C-GF4, E3C-JC4P, E3C-JB4P, E3C-WH4F Indicators Emitter Light Incident (red LED) Receiver None Materials Lens Plastic, polycarbonate Case Plastic, polycarbonate Cable sheath Plastic, polyethylene Mounting Side surface Side surface Side surface with two Side surface with two through with two through through holes. Bracket with two through holes. Brackets holes. E39-L31 optional, see holes. Bracket OAC-T1, OAC-T2, Accessories E39-L41 and OAC-T3 optional, hardware see Accessories included. Connections Prewired Emitter: 2-conductor cable, 2 m (6.56 ft) length Receiver: 2-conductor cable, 2 m (6.56 ft) length Weight Emitter 25 g (0.9 oz.) 30 g (1.1 oz.) Receiver 25 g (0.9 oz.) 30 g (1.1 oz.) Enclosure UL -- ratings NEMA 1, 2, 12 1 1 1, 2, 12 1, 2, 4, 4X, 12 IEC 144 IP64 IP50 IP60 IP64 IP66 Approvals UL -- CSA -- Ambient Operating -25 to 70C (-13 to 158F) temperature Storage -25 to 70C (-13 to 158F) E3C-2 2 m (3.28 ft) 8 mm (0.32 in) min. dimension Zinc die-cast Side surface with two through holes. Bracket E39-L42 and hardware included. 60 g (2.2 oz.) 60 g (2.2 oz.) DIFFUSE REFLECTIVE TYPE Part number Sensing distance Detectable object type Required amplifier Indicators Materials Lens Case Cable sheath Mounting Connections Weight Enclosure ratings Approvals Ambient temperature Prewired UL NEMA IEC 144 UL CSA Operating Storage E3C-DS5W E3C-DS10 5 cm (1.97 in) with 10 X 10 cm 10 cm (3.94 in) with 5 X 5 cm (1.97 in) (3.94 in) 90% reflectance white mat paper 90% reflectance white mat paper Opaque and transparent materials E3C-A, E3C-C, E3C-GE4, E3C-GF4, E3C-JC4P, E3C-JB4P, E3C-WH4F Light Incident (red LED) Plastic, polycarbonate Plastic, polycarbonate Plastic, polyethylene Side surface with two through holes. Side surface with two through holes. Bracket E39-L42 optional, see Accessories. 4-conductor cable, 2 m (6.56 ft) length 50 g (1.8 oz.) -- 1 1, 2, 12 IP50 IP64 -- -- -25 to 70C (-13 to 158F) -25 to 70C (-13 to 158F) 4 E3C E3C AMPLIFIERS AC Powered Part number Supply voltage Power consumption Operation mode Sensitivity Control Relay output DC solidstate Response time ON OFF Timer functions Circuit protection Indicators Materials Mounting Connections Weight Enclosure ratings Approvals Ambient temperature Type Max. load Min. load Type Max. load Max. on-state voltage drop Solid-state Contact Solid-state Contact Type Range Output shortcircuit E3C-A E3C-C 100 to 240 VAC, 50/60 Hz 3 VA max. Light-ON/Dark-ON, switch selectable Adjustable SPDT 1 A, 240 VAC (p.f. = 1) 1 mA, 5 VDC NPN-SPST with constant current source Load (relay, sink) logic, 80 mA, 24 VDC Voltage logic (source): 1.5 to 4 mA 1.0 VDC 1 ms or 2 ms max., switch selectable 20 ms max. 1 ms or 2 ms max., switch selectable 20 ms max. -- ON-delay, OFF-delay, one-shot, switch selectable -- 0.1 to 1 second or 1 to 10 seconds, switch selectable Not available Light Incident (red LED), Output Stability (green LED), Output Operation (red LED) Plastic Requires PF113A-E socket (included); socket mount to DIN rail track Terminal screws on socket 220 g (7.8 oz.), including socket -- 1 IP20 -- -- -10 to 55C (14 to 131F) -25 to 70C (-13 to 158F) Case UL NEMA IEC144 UL CSA Operating Storage DC Powered Part number Supply voltage Current consumption Operation mode Sensitivity Control DC Type output solidstate Max. load Alarm output Response time Circuit protection E3C-JB4P E3C-JC4P E3C-GE4 E3C-GF4 12 to 24 VDC 10%; 1 V max. permissible ripple peak-to-peak 50 mA Light-ON/Dark-ON Light-ON/Dark-ON, switch selectable jumper selectable Adjustable PNP output NPN output NPN output PNP output with constant current source 100 mA max. 100 mA max. Load (relay, sink) 100 mA max. 24 VDC 24 VDC logic: 80 mA, 24 VDC 24 VDC Voltage logic (source): 1.5 to 4 mA 0.7 VDC 0.7 VDC 1.2 VDC Max. on-state voltage drop Type Max. load ON PNP NPN 50 mA, 24 VDC 50 mA, 24 VDC 1 ms OFF 1 ms or 40 ms, selectable Output short-circuit DC power supply reverse polarity Yes Yes -- -- 1 ms or 2 ms max., selectable 1 ms or 2 ms max., selectable Yes Yes 5 E3C-WH4F Light-ON/Dark-ON, switch selectable NPN and PNP open collector outputs 100 mA, 40 VDC (each output) 0.7 VDC 1 ms or 2 ms max., switch selectable 1 ms or 2 ms max., switch selectable Yes Yes E3C E3C DC Amplifiers, continued Part number Indicators Materials Mounting Case Connections Weight Enclosure Approvals Ambient temperature UL NEMA IEC 144 UL CSA Operating Storage E3C-JB4P E3C-JC4P E3C-GE4 E3C-GF4 Light Incident (red LED), Output Stability (green LED) Plastic DIN rail track or mounting Requires PYF08A-E bracket E39-L48 (included) or PYF08M or side surface with two socket (not included). through holes Order separately from Accessories. Prewired with 5 conductor Terminal screws cable, 2 m (6.56 ft) length on socket 80 g (2.8 oz.) -- 1, 2 IP50 -- -- -10 to 55C (14 to 131F) -25 to 70C (-13 to 158F) 15 g (0.5 oz.) -- 1 IP20 OUTPUT CIRCUIT DIAGRAMS Amplifiers E3C-A, E3C-C Amplifiers E3C-J4P PNP output type E3C-JB4P NPN output type E3C-JC4P 6 E3C-WH4F DIN rail track or bottom surface with two through holes. Terminal screws or direct connection to S3D8 Sensor Controller with E99-C connector (included). 100 g (3.5 oz.) E3C E3C OUTPUT CIRCUIT DIAGRAMS, continued Amplifier E3C-GE4 Light-ON Dark-ON PNP Output E3C-GF4 Light-ON 0V Dark-ON +12 to 24 VDC +12 to 24 VDC 0V Load Amplifier E3C-WH4F Engineering Data EXCESS GAIN RATIO E3C-S20W E3C-S10 E3C-S30T, E3C-S30W 100 50 10 10 10 Excess gain ratio Excess gain ratio Excess gain ratio 100 1 1 1 0 5 10 Detecting distance (cm) 15 0 5 10 15 20 25 30 35 Detecting distance (cm) 7 40 45 50 0 20 40 60 Detecting distance (cm) 80 100 E3C E3C EXCESS GAIN RATIO, continued E3C-S50 E3C-2 E3C-1 Excess gain ratio 100 10 1 0 10 20 30 40 50 60 70 Detecting distance (cm) E3C-DS5W 80 90 100 E3C-DS10 LIGHT SOURCE/RECEIVER SETTING RANGE E3C-S30T, E3C-S30W E3C-S20W Parallel offset distance Y (cm) Separate type E3C-S10 Detecting distance X (cm) 8 E3C E3C LIGHT SOURCE/RECEIVER SETTING RANGE, continued E3C-S50 E3C-1 E3C-2 E3C-DS10 (Example 1) E3C-DS10 (Example 2) OPERATING RANGE Diffuse Reflective Type E3C-DS5W Dimensions Unit: mm SENSORS E3C-S10 Mounting Brackets for E3C-S10 Mount the emitter and receiver on the legs of the U-shaped bracket so they face each other. Dimension "A" shows the fixed sensing distance. Part number OAC-T1 OAC-T1 OAC-T3 9 Dimension A 10 mm (0.394 in) 20 mm (0.787 in) 30 mm (1.81 in) E3C E3C E3C-S20W Receiver Light source E3C-S30T 2 m (6,56 ft) cable, 1.8 mm OD E3C-S30W 2 m (6,56 ft) cable, 1.8 mm OD 10 E3C E3C E3C-S50 E39-L31 Optional Mounting Bracket E3C-1 NOTE: E3C-1 is shown mounted in E39-L41 bracket supplied with each sensor. E3C-2 NOTE: E3C-2 is shown mounted in E39-L42 bracket supplied with each sensor. E3C-DS5W 11 E3C E3C E3C-DS10 NOTE: Use mounting bracket E39-L42, shown on E3C-2; order separately from Accessories. AMPLIFIERS E3C-A, E3C-C NOTE: Socket PF113A-E and two hold-down clips are included with these amplifiers. E3C-JB4P, E3C-JC4P * Attach the caution label after adjusting the sensitivity adjuster. ** This is not necessary when mounting the amplifier on DIN rail track. E3C-GE4, E3C-GF4 NOTE: Order required socket PYF08A-E or PYF08M from Accessories section. 12 E3C E3C E3C-WH4F Mounting holes SOCKETS PF113A-E Track-Mount Socket Socket PF113A-E and two hold-down clips are supplied with E3C-A and E3C-C amplifiers. Terminal arrangement (top view) PYF08A-E Combination Track and Bottom Mount Socket for E3C-GE4, E3C-GF4 Terminal arrangement (top view) Mounting holes Mounting holes PYF08M Bottom Surface Mount Socket for E3C-GE4, E3C-GF4 Terminal arrangement (top view) 13 Mounting holes E3C E3C MOUNTING TRACK AND ACCESSORIES PFP-100N/PFP-50N DIN Rail PFP-M End Plate PFP-S Spacer Connections Amplifier model Sensors Diffuse reflective type Through-beam type E3C-S10, E3C-S20W, E3C-S30, E3C-S50, E3C-1, E3C-2 E3C-DS5W, E3C-DS10 E3C-A, E3C-C E3C-JB4P and E3C-JC4P E3C-GE4 Notes *Shielded wires must not be peeled in excess of 2 cm (0.787 in) for receiver (white lead) and 5 cm (1.969 in) for the light source (red lead). **Response time is 1 ms when terminal 8 is left open and 2 ms when terminal 8 is short-circuited with the 0 V terminal of the power supply (negative side). 14 *Shielded wires must not be peeled in excess of 2 cm (0.787 in). **Response time is 1 ms when terminal 8 is left open and 2 ms when terminal 8 is short-circuited with the 0 V terminal of the power supply (negative side). E3C E3C Connections, continued Amplifier model Sensors Through-beam type Diffuse reflective type E3C-S10, E3C-S20W, E3C-S30, E3C-S50, E3C-1, E3C-2 E3C-DS5W, E3C-DS10 E3C-WH4F Notes NOTE: Terminals 5, 6, 7, and 8 are not used when connected to S3D8 or S3D-F sensor controllers. NOTE: Terminals 5, 6, 7, and 8 are not used when connected to S3D8 or S3D-F sensor controllers. *Shielded wires must not be peeled in excess of 2 cm (0.787 in) for the receiver (white lead) and 5 cm (1.969 in) for the light source (red lead). *Shielded wires must not be peeled in excess of 2 cm (0.787 in). Operation E3C-A Timing Chart E3C-A Amplifier Selection of operation mode DARK ON LIGHT ON When light is incident, the output relay operates and solid-state output becomes high (H). DARK ON LIGHT ON When light is interrupted, the output relay operates and the solid-state output becomes high (H). Selection of response time NOTE: 1. Control output is produced only during the input time. 2. When t exceeds 1 ms or 2 ms, solid-state output is produced. To produce relay contact output, t must be longer than 20 ms. 15 2 msec (B) 1 msec (A) The response time is set to 2 ms. 2 msec (B) 1 msec (A) The response time is set to 1 ms. E3C E3C E3C-C AMPLIFIER Selection of operation mode Selection of response time Setting the delay time Gate input operation When the gate input terminal 9 is opened at HIGH level (6 to 30 VDC), the output relay performs the timer operation according to the input signal (light incident or light interrupted). When the gate input terminal 9 is short-circuited with the 0 V terminal 2 at LOW level (0 to 2 VDC), the output relay releases without regard to the input signal or output state. The terminal generates an inhibit signal. Selecting timer function ON D. (ON-delay) operation OFF D. (OFF-delay) operation O.S.D. (One-shot delay) operation 16 E3C E3C E3C-C ON-Delay Timing Chart E3C-C One-Shot Timing Chart E3C-C OFF-Delay Timing Chart E3C-JB4P, E3C-JC4P AMPLIFIERS Timing Charts Light-ON Stability indicator (green LED) Light incident (red LED) Sensitivity adjuster OFF-delay selector switch Light-ON/ Dark-ON operation selector switch Light beam Dark-ON Light beam Incident Interrupted LIGHT ON indicator OFF Transistor Output ON (1 ms) OFF Transistor Output ON (40 ms OFF-delay) OFF Incident Interrupted LIGHT indicator ON OFF Transistor Output (1 ms) ON OFF Transistor Output (40 ms OFF-delay) ON OFF Alarm Output Timing Chart The alarm output operates when the control output approaches critical OFF or ON state for more than 300 ms. An unstable state occurs when the amount of light incident upon the receiving element is within 20% of the amount of light needed to change the control output state. The alarm output feature is designed to indicate gradual changes in sensor/reflector position, atmosphere, temperature or ambient light which result in an unstable control output. A change occurring less than 300 ms will not cause the alarm output to operate. A 300 ms time delay is built into the alarm output circuit. This prevents false triggering of the alarm output as the leading and trailing edges of the object to be detected are sensed. The time can be extended by using an ON-delay timer in the circuit. Operation level 120% Operation level Operation level 80% Control output (light on mode) On Off Self-diagnostic output On Off 300 ms max. 17 300 ms max. E3C E3C E3C-GE4 , E3C-GF4 AMPLIFIER E3C-GF4 Timing Chart Selection of response time NOTE: t1 and t2 must exceed selected response time (1 or 2 ms) before solid-state output states will change. Response 1 ms 2 ms Wiring Terminal 8 open Terminal 8 shorted with terminal 4 (0 V) E3C-WH4F AMPLIFIER E3C-WH4F Timing Chart NOTE: t1 and t2 must exceed selected response time (1 or 2 ms) before solid-state output states will change. 18 E3C E3C OMRON ELECTRONICS LLC OMRON ON-LINE OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. 19 416-286-6465 Printed in the U.S.A.